Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 99 views

    ALARM 914 TO 915 (Sram Parity) : Causes and Remedies

    Uploaded by

    Shumail Javed
    This document describes troubleshooting steps for a parity error of the RAM module that stores part programs, specifically: 1. The error message displays an address that can be used to locate the faulty RAM chip. 2. Potential causes are faults in the RAM on the main board or RAM module, or faults in the memorized data. Clearing memory may resolve the issue. 3. If clearing memory does not work, the RAM module on the main CPU board likely needs to be replaced. Set up all data again by referring to chapter 3.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ALARM 914 TO 915 (Sram Parity) : Causes and Remedies

    Uploaded by

    Shumail Javed
    99 views2 pages
    This document describes troubleshooting steps for a parity error of the RAM module that stores part programs, specifically: 1. The error message displays an address that can be used to locate the faulty RAM chip. 2. Potential causes are faults in the RAM on the main board or RAM module, or faults in the memorized data. Clearing memory may resolve the issue. 3. If clearing memory does not work, the RAM module on the main CPU board likely needs to be replaced. Set up all data again by referring to chapter 3.

    Original Description:

    F1618_ sys_914...............

    Original Title

    F1618_SYS_914-915

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes troubleshooting steps for a parity error of the RAM module that stores part programs, specifically: 1. The error message displays an address that can be used to locate the faulty RAM chip. 2. Potential causes are faults in the RAM on the main board or RAM module, or faults in the memorized data. Clearing memory may resolve the issue. 3. If clearing memory does not work, the RAM module on the main CPU board likely needs to be replaced. Set up all data again by referring to chapter 3.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    99 views2 pages

    ALARM 914 TO 915 (Sram Parity) : Causes and Remedies

    Uploaded by

    Shumail Javed
    This document describes troubleshooting steps for a parity error of the RAM module that stores part programs, specifically: 1. The error message displays an address that can be used to locate the faulty RAM chip. 2. Potential causes are faults in the RAM on the main board or RAM module, or faults in the memorized data. Clearing memory may resolve the issue. 3. If clearing memory does not work, the RAM module on the main CPU board likely needs to be replaced. Set up all data again by referring to chapter 3.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    B–62755EN/01 8.

    TROUBLESHOOTING

    8.31 Parity error of RAM module that stores part programs.


    ALARM 914 TO 915
    (SRAM PARITY)
    Causes and Remedies (1) If a parity alarm occurs, the following message appears on the screen.
    The value at the right of “ADRS” in the lower left section of the screen
    is the address (in hexadecimal) of the alarm. This value can be used
    to locate the RAM chip in which a failure occurred.

    SYSTEM ALARM
    915 SRAM PARITY (2N+1)
    EAX EBX ECX EDX ESI EDI EBP ESP
    XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
    SS DS ES FS GS TR LDTR EFLAGS VECT ERRC ERROR–ADDRESS
    XXXX XXXX XXXX XXXX XXXX XXXX XXXX:XXXXXXX XXXX XXXX:XXXXXXXX
    STACK(PLO)
    XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX

    NMIC
    XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX

    ADRS XXXXXXXX

    This value

    (a) If the address falls in a range of 0F1000H to 0F5FFFH, 740000H


    to 77FFFFH, or 7C0000H to 7FFFFFH:
    FROM/SRAM module
    A20B–2902–0341, 0343
    A20B–2902–0410, 0411
    (b) If the address falls in a range of 700000H to 73FFFFH, 780000H
    to 7BFFFFH, or 400000H to 5FFFFFH:
    SRAM module
    A20B–2902–0350, 0351, 0352

    NOTE
    1 If an SRAM parity alarm occurs in a module other than the
    main CPU board, the following message appears: ALM972
    NMI OCCURRED IN OTHER MODULE
    2 If a parity alarm occurs in a system that was kept switched
    off for a long time, it is likely that the batteries have
    exhausted or the backup circuit (on the main board) is
    defective.

    (2) Causes are faults of RAM on the main board or RAM module, or fault
    of data memorized in RAM. When this alarm occurs immediately
    after power is turned on, once turn off power, then turn on power while
    pushing RESET and DELETE key to perform memory all clear

    375
    8. TROUBLESHOOTING B–62755EN/01

    If parity error is not released by clearing all memory, RAM on the main
    board or RAM module may be faulty. Change (4)RAM module on
    main CPU board.
    Set all the data again, referring to chapter 3 “data input/output”.
    D RAM module mounting 1 : SRAM module (Part program editing, parameters)
    position
    <Main CPU board>

    (1)

    (2) (3) (4)

    (10)

    (5) (6) (7) (8) (9)

    (2) Additional SRAM module


    Specification : A20B–2902–0350–0352
    FROM/SRAM module
    Specification : A20B–2902–0341, 0343
    A20B–2902–0411
    A20B–2902–0500, 0501

    (3) Low voltage of memory back up battery. Battery alarm occurs if


    voltage is 2.6V or less (3.0V rating).
    When the memory back up battery voltage is lowered, BAT is
    displayed at lower part of the screen.
    When battery alarm is lit, replace with new lithium batteries as soon
    as possible.
    Refer to 2.8 battery replacing item and change the batteries.
    (4) Power supply unit is faulty
    When alarm turns off by an operation of clearing all the memory,
    power supply unit may also be faulty.

    376

    You might also like