Asme B36.10M (2000)

COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services

The American Society of
Mechanical Enlineen
A N
A M E R I C A N
N A T I O N A L
S T A N D A R D
WELDED AND SEAMLESS

WROUGHT STEEL PIPE
ASME B36.1OM-2000
Date of Issuance: March 15, 2001
This Standard will be revised when the Society approves the issuance of
a new edition. There will be no addenda or written interpretations of the
requirements of this Standard issued to this edition.
ASME is the registered trademark of the American Society of Mechanical Engineers.
This code or standard was developed under procedures accredited as meeting thecriteria for
American National Standards. The Consensus Committee that approved the code or standard
was balanced to assure that individuals from competent andconcerned interests have had an
opportunity toparticipate. The proposed code or standard was made available for public review
and comment that provides an opportunity for additional public input from industry, academia,
regulatory agencies, and the public-at-large.
ASME does not "approve," "rate," or "endorse" any item, construction, proprietary device,
or activity.
ASME does not take any position with respect to the validity of any patent rights asserted in
connection with any items mentioned in this document, and does not undertake to insure anyone
utilizing a standard againstliability for infringement of any applicable letters patent, nor assume
any such liability. Users of a code or standard are expressly advised that the determination of
the validity of any such patent rights, andthe risk of infringement of such rights, is entirely their
own responsibility.
Participation by federal agency representative(s) or person(s) affiliated with industry is not to
be interpreted as government or industry endorsement of this code or standard.
ASME accepts responsibility for only those interpretations of this document issued in
accordance with the established ASME procedures and policies, which precludes the issuance
of interpretations by individuals.
No part of this document may bereproduced in any form,

in an electronic retrieval system or otherwise,
without the prior written permissionof the publisher.
The Am.erican Society of Mechanical Engineers

Three Park Avenue, New York, NY 10016-5990
Copyright O 2001 by
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
All Rights Reserved
Printed in U.S.A.

S T D - A S M E B 3 b - L O M - E N G L 2000 m 0757b70 Ob21734 785 M
In March 1927, theAmerican Standards Association authorized the organization of a

Sectional Committee on Standardization of Dimensions and Material of Wrought Steel and
Wrought Iron Pipe and Tubing for the purpose of unifying the standards of these commodities
in force in this country. The American Society for Testing and Materials and The American
Society of Mechanical Engineers were designated as sponsors, and the first meeting of the
Sectional Committee washeld in Pittsburgh, Pennsylvania, onMay 18, 1928.
The dimensions of commercialpipe in generaluse in theUnited States at thetime
conformed rather generallytothoserecommended by the ASME Committee onStandard
PipeandPipe Threads published in 1886 (ASME Transactions, Vol.VIII,p. 29). On these
standards an enormous industryhas beenbuiltandthe satisfactory useof thisproduct
provesthe soundness ofthe original designand specification.
Increasingly severe service demands at thetimeofthe Committee’s organization had
beenmetby using the nearest available pipe or tubing for heavier sections such as casing,
mechanicaltubing, etc., with resultinguneconomicalmultiplicity ofwallthicknesses.
Subsequently, the Committee, withthecooperation of the industry, made a survey of
existing practice as the logical starting point for the development of an American Standard.
Fromthis survey, a table was designed to provide a selectionofwall thicknesses ofpipe
to cover the power piping requirements of industry where strength to resist internal pressure
governsselection andwas later expandedtoincludepipe diameters and thicknesses used
in other industries.
The original intent of the Committee was to establish a system of Schedule Numbers
forpipesize/wallthicknesscombinationswhichwouldhaveanapproximatelyuniform
relationship equalto loo0 timesthe P/S expression contained in themodifiedBarlow
formula for pipewallthickness as defined in theAppendixtothis standard. The resulting
Numbersdeparted so far from existing wall thicknesses in commonusethattheoriginal
intent could not beaccomplished. The Schedule Numberswerethen adopted strictly as a
convenient designationsystemfor use in ordering.
Inall cases, the designer mustbasehisselection on the rules and allowable stresses set
by the code which governs his particular construction. The table is dimensionally complete
for all sizes andwallthicknesseswithinits scope, but some ofthe larger, heavier wall
sections arebeyond the capability of seamlessmillproductionandmustbeobtainedfrom
forged andboredbillets or othersources.
The firstissueofthis standard was givenwiththe designation AmericanStandard
“tentative” by theAmerican Standards Association in November 1935. Subsequent slight
revisionsto Table 1 andthe footnotes of thedimensional tables wereapprovedand the
ASA changedthedesignation toAmerican Standard; the date ofASA approval wasApril
28, 1939.
Further revisions weremade by theSectional Committee. The list of specifications in
Table 1 was revisedwherenecessary and slightrevisions in wall thicknesses of some of
thelarge sizes of theheavyschedulesweremadewhere P/S valueswereout of line.
It wasthehope in 1939 thatthedesignation of pipeused commercially by all industry
as Standard weight, Extra-Strong, and Double Extra-Strong would gradually be replaced by
Schedule Numberdesignation.However,owingto customs of over 50 years’ standing,
...
111

demand and production of pipe to these traditional dimensionsis undiminished. Consequently,
in responseto a demandfromusers,acceptedpractice for dimensionsandweightsof
commercialwroughtsteelandweldedwroughtironpipewereadded.Thesechangeswere
designated an AmericanStandardonFebruary23,1950.
SubcommitteeNo. 1 was reorganized in 1957. In additiontonecessaryeditorialchanges,
a simplifiedformat was selected for thetables of weightsand dimensions so astoinclude
andidentifythe sizes andweights ofAPI Standards 5L and 5LX. These changestothe
standard were approved and it was designated an American Standard on December 21, 1959.
The standardwasrevised in 1969. A uniformmethodto calculate theplainendweight
ofsteel pipe wasincluded,andminoradjustmentsweremade in the tabulatedweights of
steelpipeinTable 2 toconformtothis newmethod.Additional sizes andthicknesses of
steelpipethathadcomeintocommon use were also addedto Table 2. InasmuchasAPI
Standard 5L nolongerincludedwroughtironpipe,referencetothisAPIStandardwas
deletedfrom Table 3. These changesto the standardwereapprovedanditwasdesignated
an AmericanNationalStandardonFebruary 3, 1970.
Furtherrevisionsweremadetothestandard in 1975.Additional sizes andthicknesses
ofsteelpipethathadbeenaddedtoAPIspecificationswereaddedto Table 2. Table3,
DimensionsandWeightsofWeldedWroughtIronPipe, was deleted in its entirety, since
wroughtironpipeisnolongerproduced.Thesechanges in thestandardwereapproved
anditwasdesignated an AmericanNationalStandardonJune 5 , 1975.
The standardwasrevised in 1978toinclude SI metric dimensions. The outside diameter
andwallthicknesseswereconvertedtomillimeters by multiplyingtheinchdimensions by
25.4.Outsidediameterslargerthan 16 in. wereroundedtothenearestmillimeter,and
outside diameters 16 in. andsmallerwereroundedtothenearest 0.1 mm.Wallthicknesses
wereroundedtothenearest0.01mm.Theseconvertedandrounded SI metricdimensions
wereaddedtoTable2. A formulatocalculatethe SI metricplainendmass, in kilograms
per meter, using SI metric diameters and thicknesses was added to section 5. The SI metric
plain end masswascalculatedand wasaddedto Table 2. These changes in thestandard
wereapprovedanditwasdesignatedanAmericanNationalStandardonJuly18,1979.
Furtherrevisionsweremade in 1984. The ANSIdesignations,whicharenolonger in
use,weredeletedfrom Table 1, andthelist of specificationswasrevisedto agree with
currentASTMandAPIspecifications.Additionalsizesandthicknesseswhichhadbeen
addedtoAPIspecificationswereaddedto Table 2. Thateditionwasapproved as an
AmericanNationalStandardonAugust19,1985.
The next edition included additional wall thicknesses and was approved by the American
NationalStandardsInstitute onAugust24,1995.
The 1996 edition contained revisions to Table 2, adding pipe sizes, changing some plain
endweightsandmasses,identifyingmetricpipe by the dimensionless designator DN,and
eliminatingtheAPISpecificationcolumn.The 1996 editionwasapprovedas an American
NationalStandardonSeptember 23, 1996.
The current edition contains revisions to Table 2 toincludethereviseddensityforsteel
incorporatedintoSection 5 previously. Table 1 was deleted and other editorial changesto
Sections 1, 2, 3, 5, 8, and 9 were made. This edition was approved as an American National
StandardonDecember I, 2000.
iv

ASME STANDARDS COMMITTEE B32
Metal and Metal Alloy
Wrought Mill Product Nominal Sizes
of the Committea at the time of approval of this Standard.)
(The following is the roster
OFFICERS
J. A. Gruber, Ph.D., Chair
S. D. Weinman, Secretary
COMMITTEE PERSONNEL
F. M. Christensen, F. M. Christensen Metallurgical Consultant, Inc.
A. Cohen, Arthur Cohen & Associates
J. A. Gruber, Ph.D., Wheatland Tube Co.
W.N. Hotliday, L W Steel Co.
L. T. Ingels, American Gas Association, Inc.
K. O. Kverneland, Kok Metric Co.
A. R. Machell, Jr.
P. Pollak, Aluminum Association, Inc.
S. D. Weinman, The American Society of Mechanical Engineers

CONTENTS
Foreword ................................................................................. iii

Standards
Committee
Roster ................................................................ v
scope ................................................................................ 1
Size .................................................................................. 1
Materials ............................................................................. 1
Wall Thickness ....................................................................... 1
Weights .............................................................................. 1
Permissible
Variations ................................................................. 1
Pipe Threads .......................................................................... 1
Wall Thickness
Designations ........................................................... 2
Wall Thickness
Selection .............................................................. 2
Table
1 Dimensions and Weights of Welded and Seamless Wrought Steel
Pipe ................... 3
vii

WELDED AND SEAMLESS WROUGHT STEEL PIPE
1 SCOPE Thenominalplainendweight, in poundsper foot,

is calculated usingthefollowingformula:
ThisStandardcoversthe standardization of dimen-
sions ofweldedandseamlesswroughtsteelpipe for
W $ = 10.69(0- t)t
high or lowtemperaturesand pressures.
Theword pipe isused as distinguished from rube
toapplyto tubular products of dimensions commonly where
used for pipeline andpiping systems. PipeNPS12 Wpe = nominalplainendweightroundedtothe
(DN 300) andsmallerhave outside diametersnumeri- nearest 0.01 lb/ft
cally larger than their corresponding sizes. In contrast, D = outside diameter to the nearest 0.001 in. (the
the outside diameters of tubes are numerically identical symbol D is to beused for ODonly in
tothe size number for all sizes. mathematicalequations or formulas)
t = specified wall thickness rounded to thenear-
est 0.001 in.
2 SIZE The nominal plain end mass, in kilograms per meter,
is calculated using the following formula:
The size ofallpipeisidentifiedbythenominal
pipe size.
The
manufacture of pipe NPS (DN 6) to
NPS Wpr = 0.0246615(0 - t ) t
12 (DN 300) inclusive is basedon a standardized
outside diameter (OD). This OD was originally selected where
so thatpipewith a standardODandhaving a wall Wpe = nominalplainendweightroundedto the
thicknessthatwastypicalof the periodwouldhave nearest 0.01 kg/ m
an insidediameter (ID) approximatelyequal to the D = outside diametertothe nearest 0.1mm for
nominal size. Although there is no such relation between outside diameters that are 16 in. (406.4 mm)
the existing standard thickness - ODandnominal andsmallerand to the nearest 1.0 mm for
size - these nominal sizes and standard ODs continue outside diameters larger than16 in. (406.4
in use as "standard." mm) (the symbol D istobeused for OD
Themanufacture ofpipeNPS14(DN 350) and only in mathematical equations or formulas)
t = specified wall thickness roundedtothenear-
largerproceedsonthebasis ofanODcorresponding
tothenominal size. est 0.01 mm
6 PERMISSIBLE VARIATIONS
3 MATERIALS
The
dimensional standards for pipe
described
here
Variations in dimensions differ depending upon the
methodofmanufactureemployed in making the pipe
are for productscovered in ASTM specifications.
to the various specifications available. Permissible varia-
tions for dimensions are indicated in each specification.
4 WALLTHICKNESS
Thenominalwall thicknesses are given in Table1. 7 PIPE T I - " X
Unlessotherwise specified, thethreadsofthreaded
pipe shall conform to ANSI/ASME B 1.20.1, Pipe
5 WEIGHTS
Threads,GeneralPurpose (Inch).
Thenominal
weights of steel
pipe are calculated Schedules 5 and 10 wall thicknesses do not permit
values
and are tabulated in Table 1. threading in accordance
with
ANSVASME B1.20.1.

S T D - A S M E B3b.LO"ENGL 2000 0757b70 Ob21737 2b7 W
ASME B36.1OM-2000 WELDED AND SEAMLESS WROUGHT STEEL PIPE
8 WALLTHICKNESSDESIGNATIONS cation 5L. It wasnotconsideredpractical to establish

The
wall thickness designations Standard, Extra- ScheduleNumbers or new designations for them.
Strong, andDoubleExtra-Stronghavebeencommer-
cially used designations for many years. As explained in 9 WALLTHICKNESSSELECTION
the Foreword, the Schedule Numbers were subsequently
added as a convenient designation for useinordering When the selection of wall thickness depends primar-
pipe. Standard and Schedule 40 are identical for upto ily upon capacity to resist internal pressure under given
NPS 10 (DN 250) inclusive. All larger sizes of Standard conditions, thedesignershallcomputethe exact value
have in. (9.53 mm)wall thicknesses. Extra-Strong ofwall thickness suitable for conditions for which the
andSchedule 80 are identical for uptoNPS 8 (DN pipeis required, asprescribed in detail in the ASME
200) inclusive. All larger sizes of Extra-Stronghave BoilerandPressureVesselCode, ASME B31 Code
'/2 in. (12.70 mm)wall thicknesses. for Pressure Piping, or other similar codes, whichever
Pipe of sizes andwall thicknesses other thanthose governs the construction. A thickness shallbe selected
of Standard, Extra-Strong, andDouble Extra-Strong, fromTable 1 to suit the valuecomputed to fulfill the
and Schedule Number were adopted from API Specifi- conditions for which the pipe is desired.

WELDED AND
WROUGHT
SEAMLESS PIPE STEEL ASME B36.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF

WELDED AND SEAMLESS WROUGHT STEEL PIPE
Identification
Customary Units SI Units
[Standard ISTD),
Extra-Strong
End Plain Wall
Outside [XS), End Plain WallOutside
NPS Diameter, Thickness,Weight, or Double Extra Schedule DN Diameter, Thickness, Mass,
[Note (I)]in. in. lblft Strong (XXS)] No.
[Note (211 mm mm kglm
0.405 0.049 0.1 9 ... 10 ... 10.3 1.24 0.28

0.405 0.057 0.21 ... 30 ... 10.3 1.45 0.32
0.405 0.068 0.24 STD 40 ... 10.3 1.73 0.37
0.405 0.095 0.31 xs 80 ... 10.3 2.41 0.47
0.540 0.065 0.33 ... 10 ... 13.7 1.65 0.49

0.540 0.073 0.36 ... 30 ... 13.7 1.85 0.54
0.540 0.088 0.43 STD 40 ... 13.7 2.24 0.63
0.540 0.1 19 0.54 xs 80 ... 13.7 3.02 0.80
0.675 0.065 0.42 ... 10 10 17.1 1.65 0.63

0.675 0.073 0.47 ... 30 10 17.1 1.85 0.70
0.675 0.091 0.57 STD 40 10 17.1 2.31 0.84
0.675 0.1 26 0.74 xs 80 10 17.1 3.20 1.10
0.840 0.065 0.54 ... 5 15 21.3 1.65 0.80

0.840 0.083 0.67 ... 10 15 21.3 2.1 1 1.o0
0.840 0.095 0.76 *.. 30 15 21.3 2.41 1.12
0.840 0.109 0.85 STD 40 15 21.3 2.77 1.27
0.840 0.147 1 .o9 xs 80 15 21.3 3.73 1.62

0.840 0.1 88 1.31 ... 160 15 21.3 4.78 1.95
0.840 0.294 1.72 xxs ... 15 21.3 7.47 2.55
1.O50 0.065 0.69 ... 5 20 26.7 1.65 1.O3

1.O50 0.083 0.86 ... 10 20 26.7 2.1 1 1.28
1.O50 0.095 0.97 ... 30 20 26.7 2.41 1.44
1.O50 0.1 13 1.13 STD 40 20 26.7 2.87 1.69
1.O50 0.1 54 1.48 xs 80 20 26.7 3.91 2.20

1.O50 0.219 1.95 ... 160 20 26.7 5.56 2.90
1.O50 0.308 2.44 xxs ... 20 26.7 7.82 3.64
1.315 0.065 0.87 ... 5 25 33.4 1.65 1.29

1.315 0.109 1.41 ... 10 25 33.4 2.77 2.09
1.31 5 0.114 1.46 ... 30 25 33.4 2.90 2.18
1.315 0.133 1.68 STD 40 25 33.4 3.38 2.50
1.315 0.179 2.17 xs 80 25 33.4 4.55 3.24

1.31 5 0.250 2.85 ... 160 25 33.4 6.35 4.24
1.31 5 0.358 3.66 xxs ... 25 33.4 9.09 5.45
1.660 0.065 1.11 ... 5 32 42.2 1.65 1.65

1.660 0.109 1.81 ... 10 32 42.2 2.77 2.69
1.660 0.117 1.93 ... 30 32 42.2 2.97 2.87
1.660 0.140 2.27 STD 40 32 42.2 3.56 3.39
1.660 0.191 3.00 xs 80 32 42.2 4.85 4.47

1.660 0.250 3.77 ... 160 32 42.2 6.35 5.61
1.660 0.382 5.22 xxs ... 32 42.2 9.70 7.77

WELDED
B36.10M-2000
ASME AND
WROUGHT
SEAMLESS PIPE STEEL

WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT’D)
Identification
[Standard (STD),
Extra-Strong
End Plain WallOutside (XS), End Plain WallOutside
Diameter,
NPSThickness,
Double
Weight,
Schedule
Extra
or DN Diameter,
Thickness,
Mass,
In.
[Note 1111 in. lbit Strona 1XXS)I No. [Note
kglm
(2)lmm mm
1.goo 0.065 1.28 ... 5 40 48.3 1.65 1.90

1 .goo 0.109 2.09 ... 10 40 48.3 2.77 3.1 1
1.900 0.125 2.37 ... 30 40 48.3 3.18 3.53
1 .goo 0.145 2.72 STD 40 40 48.3 3.68 4.05
1.goo 0.200 3.63 xs 80 40 48.3 5.08 5.41

1 .goo 0.281 4.86 ... 160 40 48.3 7.14 7.25
1 .goo 0.400 6.41 xxs ... 40 48.3 10.15 9.55
2.375 0.065 1.61 ... 5 50 60.3 1.65 2.39

2.375 0.083 2.03 ... ... 50 60.3 2.1 1 3.03
2.375 0.109 2.64 ... 10 50 60.3 2.77 3.93
2.375 0.1 25 3.01 ... 30 50 60.3 3.18 4.48
2.375 0.141 3.37 ... ... 50 60.3 3.58 5.01

2.375 0.1 54 3.66 STD 40 50 60.3 3.91 5.44
2.375 0.172 4.05 ... ... 50 60.3 4.37 6.03
2.375 0.188 4.40 ... ... 50 60.3 4.78 6.54
2.375 0.218 5.03 xs 80 50 60.3 5.54 7.48

2.375 0.250 5.68 ... ... 50 60.3 6.35 8.45
2.375 0.281 6.29 ... ... 50 60.3 7.14 9.36
2.375 0.344 7.47 ... 160 50 60.3 8.74 11.1 1
2.375 0.436 9.04 xxs ... 50 60.3 11.O7 13.44
2.875 0.083 2.48 ... 5 65 73.0 2.1 1 3.69

2.875 0.109 3.22 ... ... 65 73.0 2.77 4.80
2.875 0.120 3.53 ... 10 65 73.0 3.05 5.26
2.875 O. 125 3.67 ... ... 65 73.0 3.18 5.48
2.875 O. 141 4.1 2 ... ... 65 73.0 3.58 6.1 3

2.875 0.156 4.53 ... ... 65 73.0 3.96 6.74
2.875 0.172 4.97 ... ... 65 73.0 4.37 7.40
2.875 0.188 5.40 ... 30 65 73.0 4.78 8.04
2.875 0.203 5.80 STD 40 65 73.0 5.16 8.63

2.875 0.216 6.14 ... ... 65 73.0 5.49 9.14
2.875 0.250 7.02 ... ... 65 73.0 6.35 10.44
2.875 0.276 7.67 xs 80 65 73.0 7.01 11.41
2.875 0.375 10.02 ... 160 65 73.0 9.53 14.92

2.875 0.552 13.71 xxs ... 65 73.0 14.02 20.39
3.500 0.083 3.03 ... 5 80 88.9 2.11 4.52

3.500 0.1 o9 3.95 ... ... 80 88.9 2.77 5.88
3.500 0.1 20 4.34 ... 10 80 88.9 3.05 6.46
3.500 0.1 25 4.51 ... ... ao 88.9 3.18 6.72
3.500 0.141 5.06 ... ... 80 88.9 3.58 7.53

3.500 0.1 56 5.58 ... ... 80 88.9 3.96 8.30
3.500 0.172 6.1 2 ... ... 80 88.9 4.37 9.1 1
3.500 0.1 88 6.66 ... 30 ao 88.9 4.78 9.92
3.500 0.216 7.58 STD 40 80 88.9 5.49 11.29

WELDED
STEEL
AND
WROUGHT
SEAMLESS PIPE ASME B36.10M-2000

WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D)
Identification
Customary Units [Standard (STDL SI Units
Outside Wall
End Plain Extra-Strong (XS), End Plain WallOutside
[Note (1 II in. In. lblft Strong [XXSll No. [Note (211 mm mm kglm
3.500 0.250 8.69 ... ... 80 88.9 6.35 12.93

3.500 0.281 9.67 ... ... 80 88.9 7.14 14.40
3.500 0.300 10.26 xs 80 80 88.9 7.62 15.27
3.500 0.438 14.34 ... 160 80 88.9 11.13 21.35
3.500 0.600 18.60 xxs ... 80 88.9 15.24 27.68
4.000 0.083 3.48 ... 5 90 101.6 2.1 1 5.18

4.000 o.1 o9 4.53 ... ... 90 101.6 2.77 6.75
4.000 o.120 4.98 ... 10 90 101.6 3.05 7.41
4.000 0.125 5.18 ... ... 90 101.6 3.18 7.72
4.000 0.141 5.82 ... ... 90 101.6 3.58 8.65

4.000 0.156 6.41 ... ... 90 101.6 3.96 9.54
4.000 0.172 7.04 ... ... 90 101.6 4.37 10.48
4.000 O.188 7.66 ... 30 90 101.6 4.78 11.41
4.000 0.226 9.12 STD 40 90 101.6 5.74 13.57

4.000 0.250 10.02 ... ... 90 101.6 6.35 14.92
4.000 0.281 11.17 ... ... 90 101.6 7.14 16.63
4.000 0.318 12.52 xs 80 90 101.6 8.08 18.64
4.500 0.083 3.92 ... 5 1 O0 114.3 2.1 1 5.84

4.500 0.109 5.1 2 ... ... 1 O0 114.3 2.77 7.62
4.500 0.120 5.62 ... 10 1 O0 1 14.3 3.05 8.37
4.500 0.125 5.85 ... ... 1 O0 1 14.3 3.18 8.71
4.500 0.141 6.57 ... ... 1 O0 1 14.3 3.58 9.78

4.500 0.156 7.24 ... ... 1 O0 1 14.3 3.96 10.78
4.500 O.172 7.96 ... ... 1 O0 114.3 4.37 11.85
4.500 O.188 8.67 ... 30 1 O0 114.3 4.78 12.91
4.500 0.203 9.32 ... ... 1 O0 114.3 5.16 13.89

4.500 0.219 10.02 ... ... 1 O0 114.3 5.56 14.91
4.500 0.237 10.80 STD 40 1O0 114.3 6.02 16.08
4.500 0.250 11.36 ... ... 1 O0 114.3 6.35 16.91
4.500 0.281 12.67 ... ... 1 O0 114.3 7.14 18.87

4.500 0.312 13.97 ... ... 1 O0 114.3 7.92 20.78
4.500 0.337 15.00 xs 80 1 O0 114.3 8.56 22.32
4.500 0.438 19.02 ... 120 1 O0 114.3 11.13 28.32
4.500 0.531 22.53 ... 160 1 O0 114.3 13.49 33.54

4.500 0.674 27.57 xxs ... 1 O0 114.3 17.12 41 .O3
5.563 0.083 4.86 ... ... 125 141.3 2.11 7.24

5.563 0.109 6.36 ... 5 125 141.3 2.77 9.46
5.563 O.125 7.27 ... *.. 125 141.3 3.18 10.83
5.563 0.134 7.78 ... 10 125 141.3 3.40 1 1.56
5.563 0.1 56 9.02 ... ... 125 141.3 3.96 13.41

5.563 0.1 88 10.80 ... ... 125 141.3 4.78 16.09
5.563 0.219 12.51 ... ... 125 141.3 5.56 18.61
5.563 0.258 14.63 STD 40 125 141.3 6.55 21.77

B36.10M-2000
ASME WELDED AND
WROUGHT
SEAMLESS PIPE STEEL

Identification
[Standard (STD),
Outside
Extra-Strong
End
Plain
Wall (XS), Outside
End
Plain
Wall
Diameter,
NPS Thickness,Weight, or Double Extra Schedule DN Diameter, Thlickness, Mass,
[Note (111 in. in. lblft Strong (XXSH No. [Note (211 mm mm kglm
5 5.563
15.87 0.281 ... ... 125 141.3 7.14 23.62
17.51 0.312
5 5.563 ... ... 125 141.3 7.92 26.05
19.19
5 0.344 5.563 ... ... 125 141.3 8.74 28.57
20.80 0.375
5 5.563 xs 125 80 141.3 9.53 30.97
27.06 0.500
5 5.563 40.28 12.70 141.3... 125 120
32.99 0.625
5 5.563 49.12 15.88 141.3. . . 125 160
38.59 0.750
5 5.563 xxs
57.43 19.05 ...
141.3 125
6 6.625 0.083 5.80 ... ... 150 168.3 2.1 1 8.65

6 6.625 0.109 7.59 ... 5 150 168.3 2.77 11.31
6 6.625 0.125 8.69 ... ... 150 168.3 3.1 8 12.95
6 6.625 0.134 9.30 ... 150 10 168.3 3.40 13.83
6 6.625 0.141 9.77 ... ... 150 168.3 3.58 14.54

6 6.625 0.156 10.79 ... ... 150 168.3 3.96 16.05
6 6.625 0.172 11.87 ... ..* 150 168.3 4.37 17.67
6 6.625 0.188 12.94 ... ... 150 168.3 4.78 19.28
13.94 60.203 6.625 ... .168.3

.. 150 5.1 6 20.76
15.00 6
0.219 6.625 ... ...
168.3 150 22.31 5.56
17.04 60.250 6.625 .25.36
.. 6.35 .168.3
.. 150
18.99 60.280 6.625 28.26 1 7.1 168.3
STD 150 40
21 60.312 6.625 .O6 .31.33

.. 7.92 .168.3
.. 150
6 6.625 0.344 23.10 34.39... 8.74 ...
168.3 150
25.05 0.375
6 6.625 ... ...
37.31 150
9.53 168.3
28.60 0.432
6 6.625 xs 42.56
80 150
10.97 168.3
6 6.625 0.500 32.74 ... ... 150 168.3 12.70 48.73

6 6.625 0.562 36.43 ... 150 120 168.3 14.27 54.21
6 6.625 0.625 40.09 ... ... 150 168.3 15.88 59.69
45.39 0.719
6 6.625 67.57 18.26 168.3. . . 150 160
47.10 0.750
6 6.625 ...
70.12 19.05 ...
168.3 150
53.21 0.864
6 6.625 xxs
79.22 21.95 ...
168.3 150
53.78 0.875
6 6.625 ...
80.08 22.23 ...
168.3 150
9.92 8 0.109 8.625 ... 5 200 219.1 2.77 14.78

11.36 25 8 0.1 8.625 ... ... 200 219.1 3.18 16.93
8 8.625 0.148 13.41 ... 200 10 219.1 3.76 19.97
14.12 56 8 0.1 8.625 ... ... 200 219.1 3.96 21.01
8 8.625 0.188 16.96 ... ... 200 219.1 4.78 25.26

8 8.625 0.203 18.28 ... ... 200 219.1 5.16 27.22
8 8.625 0.219 19.68 ... ... 200 219.1 5.56 29.28
8 8.625 0.250 22:38 ... 20 200 219.1 6.35 33.32
24.72 0.277
8 8.625 36.82... 7.04 219.1
30 200
27.73 8
0.312 8.625 41.25 ... 7.92 ...
219.1 200
28.58 80.322
, 8.625 42.55 8.18 STD
219.1 200 40
8 8.625 0.344 30.45 45.34. . . 8.74 ...
219.1 200

WELDED AND
WROUGHT
SEAMLESS PIPE STEEL ASME B36.1OM-2000

Identification
[Standard (STD),
Extra-Strong
End Plain WallOutside (XS), Outside End Plain
Wall
[Note (111 in. in. lblft Strong (XXS)] No.
8 8.625 0.375 33.07 ... ... 200 219.1 9.53 49.25
8 8.625 0.406 35.67 ... 60 200 219.1 10.31 53.09
8 8.625 0.438 38.33 ... ... 200 219.1 11.13 57.08
8 8.625 0.500 43.43 xs 80 200 219.1 12.70 64.64
8 8.625 0.562 48.44 ... ... 200 219.1 14.27 72.08

8 8.625 0.594 51.O0 ... 1O0 200 219.1 15.09 75.92
8 8.625 0.625 53.45 ... ... 200 219.1 15.88 79.59
8 8.625 0.719 60.77 ... 120 200 219.1 18.26 90.44
8 8.625 0.750 63.14 ... ... 200 219.1 19.05 93.98

8 8.625 0.812 67.82 ... 140 200 219.1 20.62 100.93
8 8.625 0.875 72.49 xxs ... 200 219.1 22.23 107.93
8 8.625 0.906 74.76 ... 160 200 219.1 23.01 111.27
8 8.625 1.o00 81.51 ... ... 200 219.1 25.40 121.33
10 10.750 0.134 15.21 ... 5 250 273.0 3.40 22.61

10 10.750 0.156 17.67 ... ... 250 273.0 3.96 26.27
10 10.750 0.165 18.67 ... 10 250 273.0 4.19 27.78
10 10.750 0.188 21.23 ... ... 250 273.0 4.78 31.62
10 10.750 0.203 22.89 *.. ... 250 273.0 5.16 34.08

10 10.750 0.219 24.65 ... ... 250 273.0 5.56 36.67
10 10.750 0.250 28.06 ... 20 250 273.0 6.35 41.76
10 10.750 0.279 31.23 ... ... 250 273.0 7.09 46.49
10 10.750 0.307 34.27 ... 30 250 273.0 7.80 51.01

10 10.750 0.344 38.27 ... ... 250 273.0 8.74 56.96
10 10.750 0.365 40.52 STD 40 250 273.0 9.27 60.29
10 10.750 0.438 48.28 ... ... 250 273.0 11.13 71.88
10 10.750 0.500 54.79 xs 60 250 273.0 12.70 81.53

10 10.750 0.562 61.21 ... ... 250 273.0 14.27 91.O5
10 10.750 0.594 64.49 ... 80 250 273.0 15.09 95.98
10 10.750 0.625 67.65 ... ... 250 273.0 15.88 100.69
10 10.750 0.719 77.10 ... 1O0 250 273.0 18.26 114.71

10 10.750 0.812 86.26 ... ... 250 273.0 20.62 128.34
10 10.750 0.844 89.38 ... 120 250 273.0 21-44 133.01
10 10.750 0.875 92.37 ... ... 250 273.0 22.23 137.48
10 10.750 0.938 98.39 ... ... 250 273.0 23.83 146.43

10 10.750 1.o00 104.23 xxs 140 250 273.0 25.40 155.1O
10 10.750 1.125 115.75 ... 160 250 273.0 28.58 172.27
10 10.750 1.250 126.94 ... ... 250 273.0 31.75 188.90
12 12.750 0.1 56 2 1 .o0 ... 5 300 323.8 3.96 31.24

12 12.750 0.1 72 23.13 ... ... 300 323.8 4.37 34.43
12 12.750 0.180 24.1 9 ... 10 300 323.8 4.57 35.98
12 12.750 0.188 25.25 *.. ... 300 323.8 4.78 37.61

S T D * A S M E B3b.LOM-ENGL 2000 m 0757b70 Ob21745
5b0
WELDED
636.10M-2000
ASME AND SEAMLESS
STEEL
WROUGHT PIPE

Identification
[Standard (STD).
Outside Wall
Plain
End Extra-Strong (XS). Outside Wall Plain
End
[Note (111
in. in. lblft Strong (XXS)I No.
[Note (211 mm kglm mm
12 12.750 0.203 27.23 ... ... 300 323.8 5.16 40.55

12 12.750 0.219 29.34 ... 300 323.8 5.56 43.64
12 12.750 0.250 33.41 300 20 323.8 6.35 49.71
12 12.750 0.281 37.46 ... ... 300 323.8 7.14 55.76
12 12.750 0.312 41.48 ... 300 323.8 7.92 61.70

12 12.750 0.330 43.81 300 30 323.8 8.38 65.19
12 12.750 0.344 45.62 ... ... 300 323.8 8.74 67.91
12 12.750 0.375 49.61 STD ... 300 323.8 9.53 73.86
12 12.750 0.406 53.57 ... 300 40 323.8 10.31 79.71

12 12.750 0.438 57.65 ... ... 300 323.8 11.13 85.82
12 12.750 0.500 65.48 xs ... 300 323.8 12.70 97.44
12 12.750 0.562 73.22 300 60 323.8 14.27 108.93
12 12.750 0.625 81.O1 ... ... 300 323.8 15.88 120.59

12 12.750 0.688 88.71 ... 300 80 323.8 17.48 132.05
12 12.750 0.750 96.21 ... 300 323.8 19.05 143.17
12 12.750 0.812 103.63 ... ... 300 323.8 20.62 154.17
12 12.750 0.844 107.42 ... 1O0 300 323.8 21.44 159.87

12 12.750 0.875 111.08 ... ... 300 323.8 22.23 165.33
12 12.750 0.938 118.44 ... ... 300 323.8 23.83 176.29
12 12.750 1.o00 125.61 xxs 300 120 323.8 25.40 186.92
12 12.750 1.O62 132.69 ... ... 300 323.8 26.97 197.43

12 12.750 1.125 139.81 ... 300 140 323.8 28.58 208.08
12 12.750 1.250 153.67 ... * , . 300 323.8 31.75 228.68
12 12.750 1.312 160.42 300 160 323.8 33.32 238.69
14 14.000 0.156 23.09 ... 350 5 355.6 3.96 34.34

14 14.000 O. 188 27.76 ... 350 355.6 4.78 41.36
14 14.000 0.203 29.94 ... 350 355.6 5.16 44.59
14 14.000 0.210 30.96 ... ... 350 355.6 5.33 46.04
14 14.000 0.219 32.26 ... ... 350 355.6 5.56 48.00

14 14.000 0.250 36.75 ... 350 10 355.6 6.35 54.69
14 14.000 0.281 41.21 ... ... 350 355.6 7.14 61.36
14 14.000 0.312 45.65 ... 350 20 355.6 7.92 67.91
14 14.000 0.344 50.22 ... 350 355.6 8.74 74.76

14 14.000 0.375 54.62 STD 350 30 355.6 9.53 81.33
14 14.000 0.406 59.00 ... ... 350 355.6 10.31 87.79
14 14.000 0.438 63.50 ... 350 40 355.6 11.13 94.55
14 14.000 0.469 67.84 ... ... 350 355.6 11.91 100.95

14 14.000 0.500 72.16 xs ... 350 355.6 12.70 107.40
14 14.000 0.562 80.73 ... ... 350 355.6 14.27 120.12
14 14.000 O. 594 85.13 ... 60 350 355.6 15.09 126.72
14 14.000 0.625 89.36 ... ... 350 355.6 15.88 133.04

14 14.000 0.688 97.91 ... ... 350 355.6 17.48 145.76
14 14.000 0.750 106.23 350 80 355.6 19.05 158.11
14 14.000 0.812 114.48 ... ... 350 355.6 20.62 170.34

WELDED
STEEL
AND
WROUGHT

WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'DI
Identification
[Standard (STDI,
Outside Wall
Plain
End Extra-Strong (XS), Outside Wall Plain
End
NPS Diameter, Thickness,Weight, or Double Extra Schedule DN Diameter, Thickness,
Mass,
[Note ( l b 1 in. in. Iblft Strong (XXS)] No. [Note (211 mm kglm mm
14 14.000 0.875 122.77 ... ... 350 355.6 22.23 182.76

14 14.000 0.938 130.98 ... 1O0 350 355.6 23.83 194.98
14 14.000 1.000 138.97 ... ... 350 355.6 25.40 206.84
14 14.000 1.062 146.88 ... ... 350 355.6 26.97 218.58
14 14.000 1.094 150.93 ... 350 120 355.6 27.79 224.66

14 14.000 1.125 154.84 ... ... 350 355.6 28.58 230.49
14 14.000 1.250 170.37 ... 350 140 355.6 31.75 253.58
14 14.000 1.406 189.29 ... 350 160 355.6 35.71 281.72
14 14.000 2.000 256.56 ... ... 350 355.6 50.80 381.85

14 14.000 2.125 269.76 ... ... 350 355.6 53.98 401.52
14 14.000 2.200 277.51 ... ... 350 355.6 55.88 413.04
14 14.000 2.500 307.34 ... 350 355.6 63.50 457.43
16 16.000 0.1 65 27.93 ... 400 5 406.4 4.19 41.56

16.000 16 O. 188 31.78 ... ... 400 406.4 4.78 47.34
16.000 16 0.203 34.28 ... ... 400 406.4 5.16 51.O6
16 16.000 0.219 36.95 ... ... 400 406.4 5.56 54.96
16 16.000 0.250 42.09 ... 10 400 406.4 6.35 62.65

16 16.000 0.281 47.22 ... ... 400 406.4 7.14 70.30
16 16.000 0.312 52.32 ... 20 400 406.4 7.92 77.83
16 16.000 0.344 57.57 ... 400 406.4 8.74 85.71
16.000 16 0.375 62.64 STD 400 30 406.4 9.53 93.27

16 16.000 0.406 67.68 ... ... 400 406.4 10.31 100.71
16.000 16 0.438 72.86 ... ... 400 406.4 11.13 108.49
16 16.000 0.469 77.87 ... ... 400 406.4 11.91 115.87
16 16.000 0.500 82.85 xs 400 40 406.4 12.70 123.31

16 16.000 0.562 92.75 ... ... 400 406.4 14.27 138.00
16 16.000 0.625 102.72 ... ... 400 406.4 15.88 152.94
16 16.000 0.656 107.60 ... 400 60 406.4 16.66 160.13
16 16.000 0.688 112.62 ... ... 400 406.4 17.48 167.66

16 16.000 0.750 122.27 ... ... 400 406.4 19.05 181.98
16 16.000 0.812 131.84 ... ... 400 406.4 20.62 196.18
16.000 16 0.844 136.74 400 80 406.4 21.44 203.54
16.000 16 0.875 141.48 ... 400 406.4 22.23 210.61

16 16.000 0.938 151.03 ... 400 406.4 23.83 224.83
16 16.000 1.000 160.35 ... ... 400 406.4 25.40 238.66
16 16.000 1.031 164.98 ... 1O0 400 406.4 26.19 245.57
16 16.000 1.062 169.59 ... ... 400 406.4 26.97 252.37

16 16.000 1.125 178.89 ... ... 400 406.4 28.58 266.30
16 16.000 1.188 188.11 ... ... 400 406.4 30.18 280.01
16 16.000 1.219 192.61 400 120 406.4 30.96 286.66
16 16.000 1.250 197.10 ... 400 406.4 31.75 293.35

16 16.000 1.438 223.85 400 140 406.4 36.53 333.21
16 16.000 1.594 245.48 ... 400 160 406.4 40.49 365.38

ASME B36.10M-2000 WELDED AND SEAMLESS WROUGHT STEEL PIPE

Identification
[Standard (STDI,
Outside Wall
Plain
End Extra-Strong (XSI, Outside Wall
Plain
End
Diameter,
NPS Thickness,Weight, Schedule
Double
Extra
or DN Diameter, Thickness,
Mass,
[Note (111
in. in. lblft Strong (XXS1I [Note
No. (211 mm mm kglm
-
18 18.000 0.1 65 457
31.46 . .450
. 5 4.1 9 46.79
18 18.000 0.1 88 35.80 ... 457 ... 450 4.78 53.31
18 18.000 0.219 41.63 ... 457 ... 450 5.56 61.90
18 18.000 0.250 47.44 ... 457 10 450 6.35 70.57
18 18.000 0.281 53.23 ... 457 ... 450 7.14 79.21

18 18.000 0.312 58.99 457 . . .450 20 7.92 87.71
18 18.000 0.344 64.93 ... 457 . . . 450 8.74 96.62
18 18.000 0.375 70.65 STD 457 . . . 450 9.53 105.17
18 18.000 0.406 76.36 ... 457 . . . 450 10.31 113.58

18 18.000 0.438 82.23 457 . . .450 30 11.13 122.38
18 18.000 0.469 87.89 ... 457 . . . 450 11.91 130.73
18 18.000 0.500 93.54 xs 457 . . . 450 12.70 139.1 6
18 18.000 0.562 104.76 457 . . .450 40 14.27 155.81

18 18.000 0.625 11 6.09 ... 457 ... 450 15.88 172.75
18 18.000 0.688 127.32 ... 457 ... 450 17.48 189.47
18 18.000 0.750 138.30 457 ...450 60 19.05 205.75
18 18.000 0.812 149.20 ... 450 457 20.62 221.91

18 18.000 0.875 160.18 ... 450 457 22.23 238.35
18 18.000 0.938 171.08 ... 80 450 457 23.83 254.57
18 18.000 1.000 181.73 ... ... 450 457 25.40 270.36
18 18.000 1.O62 192.29 .457

.. 450 26.97 286.02
18 18.000 1.125 202.94 ... .457
.. 450 28.58 301.96
18 18.000 1.156 208.1 5 ... 1O0 457 450 29.36 309.64
18 18.000 1.188 213.51 .457
.. 450 30.18 317.68
18 18.000 1.250 223.82 ... 457 . . . 450 31.75 332.97

18 18.000 1.375 244.37 457 . . . 450 120 34.93 363.58
18 18.000 1.562 274.48 457 ... 450 140 39.67 408.28
18 18.000 1.781 308.79 457 . . . 450 160 45.24 459.39
20 20.000 0.188 39.82 ... 500 5 508 4.78 59.32

20 20.000 0.219 46.31 ... ... 500 508 5.56 68.89
20 20.000 0.250 52.78 ... 500 10 508 6.35 78.56
20 20.000 0.281 59.23 ... ... 500 . 508 7.14 88.19
20 20.000 0.312 65.66 ... 508 ... 500 7.92 97.68

20 20.000 0.344 72.28 ... 508 . . . 500 8.74 107.61
20 20.000 0.375 78.67 508 STD500 20 9.53 117.15
20 20.000 0.406 85.04 ... 508 . . . 500 10.31 126.54
20 20.000 0.438 91.59 ... ... 500 508 11.13 136.38

20 20.000 0.469 97.92 ... ... 500 508 11.91 145.71
20 20.000 0.500 104.23 xs 30 500 508 12.70 155.13
20 20.000 0.562 116.78 ... ... 500 508 14.27 173.75
20 20.000 0.594 123.23 508 . . .500 40 15.09 183.43

20 20.000 0.625 129.45 ... 508 ... 500 15.88 192.73
20 20.000 0.688 142.03 ... 508 ... 500 17.48 211.45
20 20.000 0.750 154.34. . . ... 508 500 19.05 229.71
10

STD-ASME B3b-LOM-ENGL
WELDED AND SEAMLESS WROUGHT STEEL PIPE ASME 836.10M-2000

Identification
Customary Units
(STD). [Standard SI Units
Outside Wall
End Plain Extra-Strong (XS). End Plain WallOutside
NPS Diameter. Thickness.Weight. or Double Extra Schedule DN Diameter. Thickness. Mass.
[Note (1 I1 in . in. lblft Strong (XXSII No . [Note (211 mm mm kglm
12 20.000 20 ... 60 508
247.84
20.62 500
178.89 20
0.875 20.000 ... ... 508
266.31
22.23 500
191.14 20 0.938 20.000 ... ...
284.54
23.83508 500
20 1.000 20.000
203.1 1 ... ...
302.30
25.40508 500
20.000 20 1.031 209.06 ... 500 80 508 26.19 311.19

20.000 20 1 .062 215.00 ... ... 500 508 26.97 319.94
20.000 20 1.125 227.00 ... ... 500 508 28.58 337.91
20.000 20 1.188 238.91 ... ... 500 508 30.18 355.63
0.551.25020.000 20 ... .31.75
. . 508 500
372.91
20 1.28120.000
256.34 ... 1 O0 500 381.55
32.54
508
262.10 20
1.312 20.000 ... ...
390.05
33.32508 500
273.76 20
1.375 20.000 ... . . . 508 500
407.51
34.93
500 20.000 20 ... 120

441.52
38.10508 500
341.41 20
1.750 20.000 ... 140
508.15
44.45508 500
379.53 20
1.969 20.000 ... 500 160 564.85
50.01508
84 0.18822.000 22 ... 5 ...65.334.78 559

22 50.99
0.219
22.000 ... ... ... 559 75.895.56
22 58.13
0.250
22.000 559 ... 10 ... 86.556.35
22 65.24
0.281
22.000 ... ... ... 7.14
97.17 559
2 22.000 22 ... ... ... 559 107.64

7.92
22.000 22 79.64 ... ... ... 559 118.60
8.74
86.69
0.375
22.000
22 STD 20 ...
129.14
9.53 559
0.406
22.000
22 93.72 ... ... ... 10.31 559
139.51
00.960.43822.000 22 ... ... ... 559 150.38

11.13
22 0.469 22.000
107.95 ... ... ... 559 160.69
11.91
22 22.000 0.500 114.92 xs 30 ... 559 171.10
12.70
22 0.56222.000
128.79 ... ... ... 559 191.70
14.27
2.810.62522.000 22 ... ... ... 559 212.70
15.88
22 22.000
156.74
0.688 ... ... ... 559 233.44
17.48
22 170.37
22.000
0.750 ... ... ... 559 253.67
19.05
22 183.92
22.000
0.812 ... ... ...
273.78
20.62 559
22.000 22 0.875 197.60 ... 60 ... 559 22.23 294.27

22.000 22 0.938 211.19 ... ... ... 559 23.83 314.51
22.000 22 1.000 224.49 ... ... ... 559 25.40 334.25
22.000 22 1.062 237.70 ... ... ... 559 26.97 353.86
22.000 22 1.125 251.05 ... 80 ... 559 28.58 373.85
22.000 22 1.188 264.31 ... ... ... 559 30.18 393.59

22.000 22 1.250 277.27 ... ... ... 559 31.75 41 2.84
22.000 22 1.312 290.15 ... ... ... 559 33.32 431.96
22.000 22 1.375 303.16 ... 1 O0 ... 559 34.93 451.45
22.000 22 1.438 316.08 ... ... ... 559 36.53 470.69
11

WELDED
B36.10M-2000
ASME AND SEAMLESS WROUGHT STEEL PIPE

WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'O)
Identification
Customarv Units SI Units
[Standard (STD),
Outside Wall
Plain
End Extra-Strong (XS), End Plain Wall Outside
Diameter,
NPS Thickness,Weight, Double
Schedule
Extra
or DN Diameter,
Thickness,
Mass.
rNote IlIl in. in. lblft Strong (XXS)I No. [Note (211 mm mm kglm
22.000 22 1.500 328.72 ... ... . . . 38.1 559 O 489.44

22.000 22 1.625 353.94 ... 527.05
120 ...
41.28 559
22.000 22 1.875 403.38 ... 600.67
140 ...
47.63 559
22.000 22 2.125 451.49 ... 672.30
160 ...
53.98 559
55.42
24 0.21824.000 ... 600 5 61O 5.54 82.58
63.47 24
0.250 24.000 ... 600 10 61O 6.35 94.53
0.281 24.000 24 ... ... 600 610 7.14 106.15
0.31 24.000 24 2 79.01 ... ... 600 610 7.92 117.60
0.344 24.000 24 ... .61

.. 600 129.60
O 8.74
94.71 24
0.375 24.000 610 STD 600 20 141.12 9.53
.406 24.000 24 ... ...
152.48 10.31
600 610
110.32 24
0.438 24.000 ... ...
610 600 164.38 11.13
24.000 24 0.469 117.98 ... ... 600 610 11.91 175.67

24.000 24 0.500 125.61 xs ... 600 610 12.70 187.07
24 24.000 0.562 140.81 ... 600 30 610 14.27 209.65
24.000 24 0.625 156.17 ... ... 600 61O 15.88 232.67
171.45 240.688 24.000 .., 40 600 61O 17.48 255.43

24
186.41
0.750
24.000 ... ... 600 61O 19.05 277.63
201.28 240.812 24.000 ... ... 600 61O 20.62 299.71
216.31 240.875 24.000 ... ... 600 61O 22.23 322.23
24 24.000 0.938 231.25 ... ... 600 61O 23.83 344.48

24 24.000 0.969 238.57 ... 600 60 61O 24.61 355.28
24.000 24 1.000 245.87 ... ... 600 61O 25.40 366.19
24.000 24 1.062 260.41 ... ... 600 61O 26.97 387.79
24.000 24 1.125 275.10 ... ... 600 61O 28.58 409.80

24.000 24 1.188 289.71 ... ... 600 610 30.18 431.55
24.000 24 1.219 296.86 ... 600 80 610 30.96 442.1 1
24.000 24 1.250 304.00 ... ... 600
31.75 610 452.77
24.000 24 1.312 318.21 ... ...

610 600 33.32 473.87
24.000 24 1.375 332.56 ... ...
610 600 34.93 495.38
24.000 24 1.438 346.83 ... ...
610 600 36.53 51 6.63
24.000 24 1.500 360.79 ... ...
610 600 38.1O 537.36
24 24,000 1.531 367.74 ... 1O0 600

38.89 610 547.74
24 24.000 1.562 374.66 ... ... 39.67
600 610 557.97
24 24.000 1.812 429.79 ... 600 120 46.02 610 640.07
24.000 24 2.062 483.57 ... 600 140 52.37 610 720.1 9
24.000 24 2.344 542.64 ... 600 160 61O 59.54 808.27
68.82 0.25026.000 26 ... ... ... 660 102.366.35

26.000 26 77.26 0.281 ... ... ... 660 114.967.14
0.312 26.000 26 ... 10 ... 660 127.367.92
26.000 26 94.35 0.344 ... ... ... 660 140.378.74
12

S T D - A S M E B 3 b - L O M - E N G L 2000 D 0759b70 Ob21950 928 m
WELDED AND SEAMLESS WROUGHT STEEL PIPE ASME B36.10M-2000

Identification
[Standard (STDI,
Outside Wall Plain
End Extra-Strong (XS], Outside Wall
Plain
End
NPS Diameter, Thickness,Weight, or Double Extra Schedule DN Diameter, Thickness,
Mass,
[Note (111
in. in. lblft Strong (XXSII No. [Note (211 mm mm kglm
26.000 26 0.375 102.72 STO ... ... 660 9.53 152.88

26.000 26 0.406 111.08 ... ... ... 660 10.31 165.19
26.000 26 0.438 119.69 ... ... 660 11.13 178.10
26 26.000 0.469 128.00 ... ... 660 11.91 190.36
26 26.000 0.500 136.30 xs 20 ... 660 12.70 202.74

26 26.000 0.562 152.83 ... ... 660 14.27 227.25
26 26.000 0.625 169.54 ... ... ... 660 15.88 252.25
26 26.000 0.688 186.16 ... ... ... 660 17.48 276.98
26.000 26 0.750 202.44 ... ... 660 19.05 301.12

26.000 26 0.812 218.64 ... ... ... 660 20.62 325.14
26.000 26 0.875 235.01 ... ... ... 660 22.23 349.64
26 26.000 0.938 251.30 ... ... ... 660 23.83 373.87
26.000 26 1.000 267.25 ... ... ... 660 25.40 397.51
28.000 28 0.250 74.16 ... ... 700

6.35 1 71 110.35
28.000 28 0.281 83.26 ... ... 700 1 71 7.14 123.94
28.000 28 0.312 92.35 ... 10 700
7.92 1 71 137.32
28.000 28 0.344 101.70 ... ... 700
8.74 1 71 151.37
28.000 28 0.375 110.74 STD ... 700 9.5371 1 164.86

28.000 28 0.406 119.76 ... ... 10.311 71
700 178.16
28.000 28 0.438 129.05 ... ... 700 11.13
71 1 192.10
28.000 28 0.469 138.03 ... ... 700
11.911 71 205.34
28 28.000 0.500 146.99 xs 20 12.701 71

700 218.71
28.000 28 0.562 164.84 ... ... 700
14.271 71 245.19
28.000 28 0.625 182.90 ... 30 700 15.88
711 272.23
28 28.000 0.688 200.87 ... ... 700 17.48
711 298.96
28 28.000 0.750 218.48 ... ... 700

19.051 71 325.08
28.000 28 0.812 236.00 ... 700 20.62
711 351.O7
28.000 28 0.875 253.72 ... 700 22.23
711 377.60
28.000 28 0.938 271.36 ... ... 700 71 1 23.83 403.84
28.000 28 1.000 288.63 ... ... 700 71 1 25.40 429.46
30.000 30 0.250 79.51 ... 5 ... 762 6.35 118.34

30 30.000 0.281 89.27 ... ... ...
7.14 762 132.92
30.000 30 0.312 99.02 ... 10 ... 762 7.92 147.29
30.000 30 0.344 109.06 ... ... ...
8.74 762 162.36
30.000 30 0.375 118.76 STD ... ... 762 9.53 176.85

30.000 30 0.406 128.44 ... ... . .10.31
. 762 191.12
30.000 30 0.438 138.42 ... ... ... 762 11.13 206.10
30.000 30 0.469 148.06 ... ... ... 762 11.S1 220.32
30.000 30 0.500 157.68 xs 20 ... 762 12.70 234.68

30.000 30 0.562 176.86 ... ... 762 14.27 263.14
30.000 30 0.625 196.26 ... 30 ... 762 15.88 292.20
30.000 30 0.688 215.58 ... ... ... 762 17.48 320.95
13

STDOASME B 3 b - L O H - E N G L 2000 W 0 7 5 7 b 7 0 Ob21752 Bblf m

Identification
Customary Units [Standard (STDI . SI Units
Outside Wall
Plain
End Extra-Strong (XSI . End Plain Wall Outside
Diameter.
NPS Thickness. Weight . or Double
Extra
Schedule DN Diameter.
Thickness . Mass .
[Note (1)I in. in. lblft Strong (XXS)I No. [Note (211 mm kg/m
mm
30.000 30 0.750 234.51 ... ... ... 762 19.05 349.04

30.000 30 0.812 253.36 ... ... ... 762 377.01
20.62
30.000 30 0.875 272.43 ... ... ... 762 405.56
22.23
30.000 30 0.938 291.41 ... ... ... 762 433.81
23.83
30.000 30 310.01 1.000 ... ... ... 762 25.40 461.41

30 328.53
30.000 1.062 ... ... ...26.97 762 488.88
30.000 30 347.26 1.125 ... ... . . 28.58
. 762 516.93
30.000 30 365.90 1.188 ... ... ... 762 30.1 8 544.68
30.000 30 384.17 1.250 ... ... ...31.75 762 571.79
32.000 32 0.250 84.85 ... ... 800 813 6.35 126.32

32 32.000 0.281 95.28 ... ... 800 813 7.14 141.90
32.000 32 0.312 105.69 ... 10 800 813 7.92 157.25
32 32.000 0.344 116.41 ... ... 800 813 8.74 173.35
126.78 0.375
32 32.000 STD ... 800 813 188.839.53
32 32.000 0.406 137.12 ... ... 800 813 10.31 204.09
32 32.000 0.438 147.78 ... ... 800 813 11.13 220.10
32.000 32 0.469 158.08 ... ... 800 813 11.91 235.29
32.000 32 0.500 168.37 xs 20 800 81 3 12.70 250.65

32.000 32 0.562 188.87 ... ... 800 813 14.27 281.09
32.000 32 0.625 209.62 ... 30 800 813 15.88 312.17
32.000 32 0.688 230.29 ... 40 800 813 17.48 342.94
32.000 32 0.750 250.55 ... ... 800 813 19.05 373.00

32.000 32 0.812 270.72 ... ... 3 81800 20.62 402.94
32.000 32 ... ... 800 433.52
813 22.23
32.000 32 0.938 311.47 ... ... 800 3 81 23.83 463.78
32.000 32 1.000 331.39 ... ... 800 813 25.40 493.35

32.000 32 1.062 351.23 ... ... 800 813 26.97 522.80
32.000 32 1.125 371.31 ... ... 800 813 28.58 552.88
32.000 32 1.188 391.30 ... ... 800 813 30.18 582.64
32.000 32 1.250 410.90 ... ... 800 813 31.75 61 1.72
34.000 34 0.250 90.20 ... ... ... 864 134.31

6.35
34 34.000 0.281 101.29 ... ... ... 864 7.14 150.88
34 34.000 0.312 112.36 ... 10 ... 864 7.92 167.21
0.344 34 34.000 ... ... ... 864 8.74 184.34
34.79 0.375 34 34.000 STD ... ... 864 9.53 200.82

0.406 34 34.000 ... ... ... 864 10.31 217.06
34 157.14
34.000 0.438 ... ... ... 234.10864 11.13
0.469 34 34.000 ... ... ... 864 250.27
11.91
34 34.000 0.500 179.06 xs 20 ... 864 12.70 266.63

34 34.000 0.562 200.89 ... ... ... 864 14.27 299.04
34 34.000 0.625 222.99 ... 30 ... 864 15.88 332.14
34 34.000 0.688 245.00 ... 40 ... 864 17.48 364.92
14

S T D - A S M E B3b.LOM-ENGL 2000 m 0759b70 Ob2L952 7T0 m
WELDEDSTEEL
AND
WROUGHT

Identification
Customarv Units [Standard (STD), SI Units
Outside Wall
Plain
End Extra-Strong (XS), Outside
End
Plain
Wall
[Note (1 11 in. in. lblft Strong [XXS)] No.
34 34.000 0.750 266.58 ... ... ... 864 19.05 396.96
34 34.000 0.812 288.08 ... ... 864 20.62 428.88
34 34.000 0.875 309.84 ... ... ... 864 22.23 461.48
34 34.000 0.938 331.52 ... ... ... 86.4 23.83 493.75
34 34.000 1 .o00 352.77 ... ... ... 25.40 525.30

34 34.000 1 .O62 373.94 ... ... ... 26.97 556.73
34 34.000 1.125 395.36 ... ... ... 28.58 588.83
34 34.000 1.188 416.70 ... ... 30.18 620.60
34 34.000 1.250 437.62 ... ... 31.75 651.65
36 36.000 0.250 95.54 ... ... 900 914 6.35 142.14

36 36.000 0.281 107.30 ... ... 900 914 7.14 159.68
36 36.000 0.312 119.03 ... 900 10 914 7.92 176.97
36 36.000 0.344 131.12 ... ... 900 914 8.74 195.12
36 36.000 0.375 142.81 STD ... 900 914 9.53 212.57

36 36.000 0.406 154.48 ... ... 900 914 10.31 229.77
36 36.000 0.438 166.51 ... ... 900 914 11.13 247.82
36 36.000 0.469 178.14 ... ... 900 914 11.91 264.96
36 36.000 0.500 189.75 xs 900 20 914 12.70 282.29

36 36.000 0.562 212.90 ... ... 900 914 14.27 316.63
36 36.000 0.625 236.35 ... 900 30 914 15.88 351.73
36 36.000 0.688 259.71 ... ... 900 914 17.48 386.47
36 36.000 0.750 282.62 ... 900 40 914 19.05 420.45
36 36.000 0.812 305.44 ... ... 900 914 20.62 454.30
36 36.000 0.875 328.55 ... ... 900 914 22.23 488.89
36 36.000 0.938 351.57 ... ... 900 914 23.83 523.14
36 36.000 1 .o00 374.15 ... 900 914 25.40 556.62

36 36.000 1 .O62 396.64 ... 900 914 26.97 589.98
36 36.000 1.125 419.42 ... ... 900 914 28.58 624.07
36 36.000 1.188 442.10 ... ... 900 914 30.18 657.81
36 36.000 1.250 464.35 ... 900 914 31.75 690.80
38 38.000 0.312 125.70 ... ... ... 965 7.92 186.94

38 38.000 0.344 138.47 ... ... ... 965 0.74 206.11
38 38.000 0.375 150.83 STD ... ... 965 9.53 224.56
38 38.000 0.406 163.16 ... ... 965 10.31 242.74
38 38.000 0.438 175.87 ... ... ... 965 11.13 261.82
38 38.000 0.469 188.17 ... ... 965 11.91 279.94
38 38.000 0.500 200.44 xs ... ... 965 12.70 298.26
38 38.000 0.562 224.92 ... ... ... 965 14.27 334.58
38 38.000 0.625 249.71 ... ... 965 15.88 371.70

38 38.000 0.688 274.42 ... ... 965 17.48 408.46
38 38.000 0.750 298.65 ... ... ... 965 19.05 444.41
38 38.000 0.812 322.80 ... ... ... 965 20.62 480.24

ASME 836.1OM-2000 WELDED AND SEAMLESS WROUGHT STEEL PIPE

Identification
[Standard (STD).
Extra-Strong
End Plain WallOutside (XS). End Plain WallOutside
NPS Diameter. Thickness.Weight. or Double Extra Schedule DN Diameter. Thickness. Mass.
[Note (1)l in. in. lblft Strong lXXSll No. [Note (2)I mm mm kglm
38 38.000 0.875 347.26 ... ... ... 965 22.23 516.85

38.000 38 0.938 371.63 ... ... ... 965 23.83 553.1 1
38.000 38 1.000 395.53 ... ... ... 965 25.40 588.57
38.000 38 1.062 419.35 ... ... ... 965 26.97 623.90
38.000 38 443.47 1.125 ... ... . . .28.58 965 660.01

38.000 38 467.50 1.188 ... ... ...30.18 965 695.77
38 491.07
38.000 1.250 ... ... ...31.75 965 730.74
32.37 0.312 40.000 40 ... ... 1016

O00 1 196.90 7.92
45.83 0.344 40.000 40 ... ... 1016
O00 1 217.11 8.74
5 0.375 40.000 40 STD ... 1 O00 1016236.54 9.53
4 0.406 40.000 40 ... ... 1 O00 1016255.71 10.31
40.000 40 0.438 185.24 ... ... 1 O00 1 016 11.13 275.82

40.000 40 0.469 198.19 ... ... 1 O00 1 016 11.91 294.92
40.000 40 0.500 211.13 xs 1 O00 1 016 12.70 314.23
40.000 40 0.562 236.93 ... 1 O00 1 016 14.27 352.53
40.000 40 0.625 263.07 ... ... 1 O00 1016 15.88 391.67

40.000 40 0.688 289.13 ... ... 1 O00 1016 17.48 430.45
40.000 40 0.750 314.69 ... ... 1 O00 1016 19.05 468.37
40.000 40 0.812 340.16 ... ... 1 O00 1016 20.62 506.17
40.000 40 0.875 365.97 ... ... 1 O00 1 016 22.23 544.81

40.000 40 0.938 391.68 ... ... 1 O00 1 016 23.83 583.08
40.000 40 1.000 416.91 ... ... 1 O00 1 016 25.40 620.51
40 40.000 1.062 442.05 ... ... 1 O00 1 016 26.97 657.82
40.000 40 1.125 467.52 ... ... 1 O00 1 016 28.58 695.96

40.000 40 1.188 492.90 ... ... 1 O00 1 016 30.18 733.73
40.000 40 1.250 517.80 ... ... 1 O00 1 016 31.75 770.67
42.000 42 0.344 153.18 ... ... ... 1 067 8.74 228.10

42.000 42 0.375 166.86 STD ... ... 1 067 9.53 248.53
42.000 42 0.406 180.52 ... ... ... 1 067 10.31 268.67
42.000 42 0.438 194.60 ... ... ... 1 067 1 1.1
3 289.82
42.000 42 0.469 208.22 ... ... ... 1 067 11.91 309.90

42.000 42 0.500 221.82 xs ... 067. . . 1 12.70 330.21
42.000 42 0.562 248.95 ... ... 067. . . 1 14.27 370.48
42.000 42 0.625 276.44 ... ... ... 067 1 15.88 41 1.64
42.000 42 0.688 303.84 ... ... . . 067

. 1 17.48 452.43
42.000 42 0.750 330.72 ... ... . . .067 1 19.05 492.33
42.000 42 0.812 357.52 ... ... ... 1 O67 20.62 532.1 1
42.000 42 0.875 384.67 ... ... ...067 1 22.23 572.77
42.000 42 0.938 ...

411.74 ... ... 1 067 23.83 613.05
42.000 42 1.000 438.29 ... ... ... 1 067 25.40 652.46
42.000 42 1.062 ...
464.76 ... ... 1 067 26.97 691.75
42.000 42 1.125 491.57 ... ... ... 1 067 28.58 731.91
16

S T D * A S M E B3b.LOM-ENGL 2000 0757b70 Ob21754 573 D
WELDED AND
WROUGHT
SEAMLESS PIPE STEEL ASME B36.10M-2000

WELDED AND SEAMLESS WROUGHT STEEL PIPE ICONT'D)
Outrido W d PhinEnd
Schodulo ON Diamotor, Thlcknou. Mur.
No.
[Noto (2I1 mm mm kdm
42 42O
. oo 1.188 518.30 ... ... ... 1067 30.18 771.69
42 42O
. oo 1.250 544.52 ... ... ... 1067 31.75 810.80
44 44O
. oO 0.344 160.54 ... ... 100 1 1118 8.74 239.09
44 44.Ooo 0.375 174.80 STO ... 100 1 1118 9.53 260.52
44 44.Ooo 0.406 189.20 ... ... 100 1 1118 10.31 281.64
44 44.m 0.438 203.97 ... ... 1 100 1118 11.13 303.82
44 44.Ooo 0.469 218.25 ... ... 100 1 1118 11.91 324.88

44 44.Ooo 0.500 232.51 xs ... 1 100 1 118 12.70 348.18
44 44.Ooo 0.562 260.97 ... ... 100 1 1 118 14.27 388.42
44 44.Ooo 0.625 289.80 ... ... 1 100 1 118 15.88 431.62
44 44.Ooo 0.688 318.55 ... ... 1 100 1 118 17.48 474.42

44 44.m 0.750 346.76 ... ... 1 100 1 118 19.05 516.29
44 44.000 0.812 374.88 ... ... 1 100 1 118 20.62 558.04
44 44.Ooo 0.875 403.38 ... ... 100 1 1 118 22.23 600.73
44 44.000 0.938 431.79 ... ... 1 100 1 118 23.03 643.03
44 44.Ooo 1.o00 459.67 ... ... 1 100 1 118 25.40 684.41

44 44.Ooo 1.o62 487.47 ... ... 1 100 1 118 26.97 725.67
44 44.Ooo 1.125 515.63 ... ... 1 100 1 118 28.58 767.85
44 44O
. oo 1.188 543.70 ... ... 100 1 1 118 30.18 809.65
44 44.Ooo 1.250 57 1.25 ... . I . 1 100 1 118 31.75 850.54
46 46O
. Oo 0.344 167.89 ... ... ... 1168 8.74 249.87
46 46O
. oo 0.375 182.90 STD ... ... 1 168 9.53 272.27
46 46.Ooo 0.406 197.88 ... ... ... 1 168 10.31 294.35
46 46O
. oo 0.438 213.33 ... ... ... 1168 11.13 317.54
46 46O. oo 0.469 228.27 ... ... ... 1 168 11.91 339.56

46 46O. oo 0.500 243.20 xs ... ... 1 168 12.70 361.84
46 46.Ooo 0.562 272.98 ... ... ... 1 168 14.27 406.02
46 46O
. oo 0.625 303.16 ... ... ... 1168 15.88 451.20
46 0.688 333.26 ... ... ... 1168 17.48 495.97

46 0.750 362.79 ... ... ... 1 168 19.05 539.78
46 0.812 392.24 ... ... ... 1 168 20.62 583.47
46 0.875 422.09 ... ... ... 1168 22.23 628.14
46 0.938 451.85 ... ,.. ... 1168 23.03 672.41
46 46
O
. oo 1.o00 481.O5 ... ... ... 1168 25.40 715.73
46 46O
. oo 1.o62 510.17 ... ... ... 1 168 26.97 758.92
46 46O
. oo 1.125 539.68 ... ... ... 1168 28.58 803.09
46 46O
. oo 1.188 569.10 ... ... ... 1 168 30.18 846.86
46 46O
. oo 1.250 597.97 ... . f . ... 1168 31.75 889.69
48 48.Ooo 0.344 175.25 ... ... 200 1 1219 8.74 260.86
48 48O
. oo 0.375 190.92 STD ... 200 1 1219 9.53 284.25
48 48.Ooo 0.406 206.56 ... ... 200 1 1219 10.31 307.32
48 48.Ooo 0.438 222.70 ... ... 200 1 1 219 11.13 331.54
17

ASME B36.10~-2000 WELDED AND SEAMLESS WROUGHT
PIPE STEEL

Identification
Customaw Units [Standard (STD), SI Units
Outside Wall
Plain
End Extra-Strong (XSt, Outside Wall Plain
End
Diameter,
NPS Thickness,Weight, .or Double Extra Schedule DN Diameter, Thickness, Mass,
[Note (111 in. in. lblft Strong (XXSII [Note
No. (211 mm mm kglm
48.000 48 0.469 238.30 ... ... 1200 1219 11.91 354.54

48.000 48 0.500 253.89 xs ... 200 1 1219 12.70 377.81
48.000 48 0.562 285.00 ... 200 1 1 219 14.27 423.97
48 48.000 0.625 316.52 ... 1200 1219 15.88 471.17
48 48.000 0.688 347.97 ... ... ' 1200 1219 17.48 517.95
48 48.000 0.750 ...378.83 ... 1200 1219 19.05 563.74
48 48.000 0.812 409.61 ... ... 1200 1219 20.62 609.40
48 48.000 0.875 440.80 ... ... 1200 1219 22.23 656.10
48.000 48 0.938 471.90 ... ... 1200 1219 23.83 702.38
48 48.000 1.o00 502.43 1 200 1219 25.40 747.67

48 48.000 1.O62 532.88 ... ... 1200 1219 26.97 792.84
48 48.000 1.125 563.73 ... ... 1 200 1219 28.58 839.04
48 48.000 1.188 594.50 ... ... 1 200 1 219 30.18 884.82
48 48.000 1.250 624.70 ... ... 1 200 1 219 31.75 929.62
52 52.000 0.375 206.95 .. 1 321 9.53 308.23

52 52.000 0.406 223.93 1 321 10.31 333.26
52 52.000 0.438 241.42 ... ... ... 1 321 11.13 359.54
52 52.000 0.469 258.36 ... ... ... 1 321 11.91 384.50
52 52.000 0.500 275.27 ... ... ... 1 321 12.70 409.76

52 52.000 0.562 309.03 ... ... ... 1 321 14.27 459.86
52 52.000 0.625 343.25 ... ... 1 321 15.88 511.12
52 52.000 0.688 377.39 1 321 17.48 561.93
52 52.000 0.750 41 0.90 ... ... ... 1 321 19.05 61 1.66

52 52.000 0.81 2 444.33 ... ... ... 1 321 20.62 661.27
52 52.000 0.875 478.21 ... ... 1 321 22.23 712.02
52 52.000 0.938 512.01 ... ... ... 1 321 23.83 762.33
52 52.000 1.o00 545.19 ... ... ... 1 321 25.40 811.57

52 52.000 1.O62 578.29 ... ... 1 321 26.97 860.69
52 52.000 1.125 61 1.84 ... ... ... 1 321 28.58 910.93
52 52.000 1.188 645.30 ... ... ... 1 321 30.18 960.74
52 52.000 1.250 678.1 5 1 321 31.75 1 009.49
56 56.000 0.375 222.99 ... ... 1 400 1 422 9.53 331.96

56 56.000 0.406 241.29 ... ... 1 400 1 422 10.31 358.94
56 56.000 0.438 260.15 ... ... 1 400 1 422 11.13 387.26
56 56.000 0.469 278.41 ... 1 400 1 422 11.91 414.17
56 56.000 0.500 296.65 ... ... 1 400 1 422 12.70 441.39

56 56.000 0.562 333.06 ... 1 400 1 422 14.27 495.41
56 56.000 0.625 369.97 ... ... 1 400 1 422 15.88 550.67
56 56.000 0.688 406.80 ... ... 1 400 1 422 17.48 605.46
56 56.000 0.750 442.97 ... 1 400 1 422 19.05 659.1 1

56 56.000 0.812 479.05 1 400 1 422 20.62 71 2.63
56 56.000 0.875 51 5.63 ... ... 1 400 1 422 22.23 767.39
56 56.000 0.938 552.12 ... ... 1 400 1 422 23.83 821.68

S T D *ASME
SEAMLESS
WELDED AND PIPE
WROUGHT STEEL ASME B36.10M-2000

Identification
Customary Units [Standard (STD), SI Units
Outside Extra-Strong
End Plain
Wall (XS), End Plain WallOutside
[Note (111 in. in. Iblft Strong (XXS)] No.
587.95
1.000
56.000 56 ... ... 1400 1422 25.40 874.83
062 56.000 56 ... ... 1400 1422 26.97 927.86
659.94
1.125
56.000 56 ... ... 1400 1422 28.58 982.12
696.10 561.188 56.000 ... ... 1400 1422 30.18 1035.91
.250 56.000 56 731.60 ... ... 1400 1422 31.75 1 088.57
.375 60.000 60 ... ... 1 500 1 524 9.53 355.94

60258.65
0.406
60.000 ... ... 1 500 1 524 10.31 384.87
60 278.88
60.000 0.438 ... ... 1 500 1 524 11.13 415.26
.469 60.000 60 298.47 ... ... 1 500 1 524 11.91 444.13
.500 60.000 60 ... ... 1 500 1 524 12.70 473.34

357.09
0.562
60.000 60 ... ... 1 500 1 524 14.27 531.30
60 60.000
396.70 0.625 ... ... 500 1 1 524 15.88 590.62
60.000 60 0.688 436.22 ... ... 1 500 1 524 17.48 649.44
.750 60.000 60 ... ... 1 500 1 524 19.05 707.03

0.812
60.000 60 513.77 ... ... 1 500 1 524 20.62 764.50
875 60.000 60 ... ... 1 500 1 524 22.23 823.31
,938 60.000 60 ... ... 1 500 1 524 23.83 881.63
630.71
1.000
60.000 60 ... ... 1500 1524 25.40 938.73
669.11 601.062 60.000 ... ... 1 500 1 524 26.97 995.71
60708.05
1.125
60.000 ... ... 1500 1524 28.58 1 054.01
746.90 601.188 60.000 ... ... 1 500 1 524 30.18 1111.83
60 60.000
785.05 1.250 ... ... 500 1 1 524 31.75 1 168.44
64 64.000 0.375 255.06 ... ... 1 600 1 626 9.53 379.91

64 64.000 0.406 276.01 ... ... 1 600 1 626 10.31 410.81
64 64.000 0.438 297.61 ... ... 1 600 1 626 11.13 443.25
64 64.000 0.469 318.52 ... ... 1 600 1 626 11.91 474.09
64 64.000 0.500 339.41 1 600 1 626 12.70 505.29

64 64.000 0.562 381.12 . ..
* 1 600 1 626 14.27 567.20
64 64.000 0.625 423.42 ... ... 1 600 1 626 15.88 630.56
64 64.000 0.688 465.64 ... ... 1 600 1 626 17.48 693.41
64 64.000 0.750 507.1 1 ... ... 1 600 1 626 19.05 754.95

64 64.000 0.812 548.49 ... ... 1 600 1 626 20.62 816.37
64 64.000 0.875 590.46 ... 1 600 1 626 22.23 879.23
64 64.000 0.938 632.34 ... 1 600 1 626 23.83 941.57
64 64.000 1.o00 673.47 ... ... 1 600 1 626 25.40 1 002.62

64 64.000 1.O62 714.52 ... ... 1 600 1 626 26.97 1 063.55
64 64.000 1.125 756.15 ... ... 1 600 1 626 28.58 1 125.90
64 64.000 1.188 797.69 ... ... 1 600 1 626 30.18 1187.74
64 64.000 1.250 838.50 ... ... 1 600 1 626 31.75 1 248.30
68 68.000 0.469 338.57 ... .. 1 727 11.91 503.75

68 68.000 0.500 360.79 ... ... ... 1 727 12.70 536.92
68 68.000 0.562 405.15 ... ... .. . 1 727 14.27 602.74
68 68.000 0.625 450.15 ... ... .. 1 727 15.88 670.12
19


Identification
Customarv Units SI Units
[Standard (STDL
Outside Wall
Plain
End Extra-Strong (XS). Outside
End
Plain
Wall
NPS Diameter. Thickness.Weight. or Double Extra Schedule DN Diameter. Thickness . Mass .
[Note (111 in. in .lblft Strong (XXSH No. [Note (211 mm mm kglm
68.000 68 0.688 495.06 ... ... ... 1 727 17.48 736.95

68.000 68 0.750 539.18 ... ... ... 1 727 19.05 802.40
68.000 68 0.812 583.21 ... ... ... 1 727 20.62 867.73
68.000 68 0.875 627.87 ... ... ... 1 727 22.23 934.60
68.000 68 0.938 672.45 ... ... ... 1 727 23.83 1 000.92
68.000 68 1.000 716.23 ... ... ... 25.40

1 727 1 065.89
68.000 68 1.062 759.93 ... ... ... 26.97
1 727 1130.73
68.000 68 1.125 804.26 ... ... ... 28.58
1 727 1 197.09
68.000 68 .
1 188 848.49 ... ... ... 30.18
1 727 1 262.92
68.000 68 1.250 891.95 ... ... ... 31.75
1 727 1 327.39
382.17 0.500 72.000 72 f . . ...

568.87 12.70 1829
800 1
72.000 72 0.562 429.18 ... ... 1 800 1 829 14.27 638.64
72.000 72 0.625 476.87 ... ... 1 800 1 829 15.88 710.06
72.000 72 0.688 524.48 ... ... 1 800 1 829 17.48 780.92
750 72.000 72 ... ...

850.32 19.05 1 829
12 72.000 72 ... ...
800919.60 20.62
1 1 829
72.000 72 ... ... 1 829 990.52
22.23
72.000 72 712.55 0.938 1. . . 800 ... 1 829 23.83 1 060.87
72.000 72 1.000 758.99 ... ... 1 800 1 829 25.40 1129.78

72.000 72 805.34 1.062 829 1 ... 800 ... 1 26.97 198.57
1
72.000 72 1.125 852.36 ... ... 1 800 1 829 28.58 1 268.98
1.188 72.000 72 338.83 1 30.18 829 ... 1 800 ... 1
72.000 72 ... 800 ... 1 1 829 31.75
407.25
1
3.55 0.500 76 76.000 600.50 ...

12.70 ...
930 ... 1
.21 0.562 76 76.000 ... ... 674.18 14.27 ... 1 930
503.60 0.625
76 76.000 ... 749.62 ... ...
15.88 1 930
0.688 76 76.000 ... ... ... 824.45
17.48
76.000 76 0.750 603.32 ... ... ... 19.05

1 930 897.77
76.000 76 0.812 652.65 ... ... ... 20.62
1 930 970.96
76 76.000 0.875 702.70 ... ... ... 22.23
1 930 1 045.89
76 76.000 0.938 752.66 ... ... ... 23.83
1 930 1 120.22
76 76.000 1.000 801.75 ... ... . . 25.40

. 930 1 1 193.05
76 76.000 1.062 850.75 ... ... ...26.97
930 1 1 265.74
900.47 1.125
76 76.000 ... ... ...
76 76.000 1.188 950.09 ... ... . . 30.18
. 930 1 1414.01
76 76.000 1.250 998.85 ... ... ...31.75
930 1 1 486.33
80.000 80 0.562 477.25 ... ... 2 O00 2 032 14.27 710.08

80.000 80 0.625 530.32 ... ... 2000 2 032 15.88 789.56
80.000 80 0.688... 583.32 ... 2000 2 032 17.48 868.43
80 80.000 0.750 635.39 ... ... 2000 2 032 19.05 945.69
80.000 80 0.812 ... 687.37 ... 2000 2 032 20.62 1 022.83

80.000 80 0.875 740.12 ... ... 2000 2 032 22.23 1 101.81
80.000 80 0.938 792.77 ... ... 2000 2 032 23.83 1 180.17
1 1.000 80.000 80 ... ... 2000
25.40 2 032 1 256.94
20

WELDED AND
WROUGHT
SEAMLESS STEEL PIPE 836.10M-2000
ASME
TABLE 1 DIMENSIONSANDWEIGHTS OF
Identification
[Standard (STD),
Outride Wall Plain
End Extra-Strong (XS), Outside
Wall End
Plain
NPS Diameter, Thickness,Weight, or Double Extra Schedule DN Dlameter, Thickness, Mass,
[Note (111 in. in. lblft Strong (XXS)] No. [Note lZ)l mm mm kglm
80.000 80 1.062 896.17 ... ... 2000 2 032 26.97 1 333.59
80 80.000 1.125 948.57 ... ... 2000 2 032 28.58 1 412.06
80 80.000 1.188 1,000.89 ... ... 2000 2 032 30.18 1 489.92
52.30
1.25080.000 80 ... ... 2000 2 032 31.75 1 566.20
NOTES:
(1) NPS (Nominal Pipe Size) is a dimensionless designator that has been substituted in the customary units section for the
previous term Inch Nominal Size.
(2) DN (Nominal Diameter) is a dimensionless designator used in the SI (metric) system to describe pipe size.
21

AMERICAN NATIONAL STANDARDS FOR PRODUCT SIZES
Preferred Thicknesses for Uncoated Thin Flat Metals (Under 0.250 ln.). . B32.1-1952(R1994)
Preferred Diameters for Round Wire - 0.500 Inches and Under ........ B32.2-1969(R1994)
Preferred Metric Sizes for Flat Metal Products.. ...................... 832.3M-l984(R1994)
Preferred Metric Sizes for Round, Square, Rectangle and Hexagon
Metal Products .................................................... B32.4M-l980(R1994)
Preferred Metric Sizes for Tubular Metal Products Other Than Pipe.. ... B32.5-1977(R1994)
Preferred Metric Equivalents of Inch Sizes for Tubular Metal Products
Other Than Pipe., ................................................. B32.6M-l984(R1994)
Welded and Seamless Wrought Steel Pipe.. ............................... .B36.10M-2000
Stainless Steel Pipe.. ............................................... B36.19M-l985(R1994)
The ASME Publications Catalog shows a complete list of all the Standards published by the
Society. For a complimentary catalog, or the latest information about our publications, call
1-800-THE-ASME (1-800-843-2763).

ASME Services
ASME is committed to developing and delivering technical information. At ASME's Information Central. we make
every effort to answer your questions and expedite your orders. Our representatives are ready to assist youinthe
following areas:
ASME Press Member Services & Benefits Public Information

Codes & Standards Other ASME Programs Self-study Courses
Credit Card Orders Payment Inquiries Shipping Information
IMechE Publications Professional Development Subscriptions/Journals/Magazines
Meetings & Conferences Short Courses Symposia Volumes
Member Dues Status Publications Technical Papers
How can you reach us? It's easier than ever!
There are four options for making inquiries* or placing orders. Simply mail, phone,fax, or E-mail us and an Information
Central representative will handle your request.
Mail Free Call Toll FU-24 hours E-Mail-

ASME US & Canada: 800-THE-ASME 973-882-1717 hours 24
Box 2900
22 Law Drive, (800-843-2763) 973-882-5155 Infocentral@asme.org
Fairfield, New Jersey Mexico: 95-800-THE-ASME
800-843-2763) 07007-2900
Universal: 973-882- 1167
* Information Central staff are not permitted to answer inquiries about the technical content of this code or standard.
Infomation as to whether or not technical inquiries are issued to this code or standard is shown on the copyright
page. All technical inquiries must be submitted in writing to the staff secretary. Additional procedures for inquiries
may be listed within.


Asme B36.10M (2000)

Uploaded by

Copyright:

Available Formats

Asme B36.10M (2000)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Asme B36.10M (2000)

Uploaded by

Copyright:

Available Formats

COPYRIGHT American Society of Mechanical Engineers

Licensed by Information Handling Services

WELDED AND SEAMLESS

ASME is the registered trademark of the American Society of Mechanical Engineers.

No part of this document may bereproduced in any form,

The Am.erican Society of Mechanical Engineers

COPYRIGHT American Society of Mechanical Engineers

In March 1927, theAmerican Standards Association authorized the organization of a

COPYRIGHT American Society of Mechanical Engineers

COPYRIGHT American Society of Mechanical Engineers

COPYRIGHT American Society of Mechanical Engineers

Foreword ................................................................................. iii

COPYRIGHT American Society of Mechanical Engineers

1 SCOPE Thenominalplainendweight, in poundsper foot,

COPYRIGHT American Society of Mechanical Engineers

ASME B36.1OM-2000 WELDED AND SEAMLESS WROUGHT STEEL PIPE

8 WALLTHICKNESSDESIGNATIONS cation 5L. It wasnotconsideredpractical to establish

COPYRIGHT American Society of Mechanical Engineers

TABLE 1 DIMENSIONS AND WEIGHTS OF

0.405 0.049 0.1 9 ... 10 ... 10.3 1.24 0.28

0.540 0.065 0.33 ... 10 ... 13.7 1.65 0.49

0.675 0.065 0.42 ... 10 10 17.1 1.65 0.63

0.840 0.065 0.54 ... 5 15 21.3 1.65 0.80

0.840 0.147 1 .o9 xs 80 15 21.3 3.73 1.62

1.O50 0.065 0.69 ... 5 20 26.7 1.65 1.O3

1.O50 0.1 54 1.48 xs 80 20 26.7 3.91 2.20

1.315 0.065 0.87 ... 5 25 33.4 1.65 1.29

1.315 0.179 2.17 xs 80 25 33.4 4.55 3.24

1.660 0.065 1.11 ... 5 32 42.2 1.65 1.65

1.660 0.191 3.00 xs 80 32 42.2 4.85 4.47

COPYRIGHT American Society of Mechanical Engineers

TABLE 1 DIMENSIONS AND WEIGHTS OF

1.goo 0.065 1.28 ... 5 40 48.3 1.65 1.90

1.goo 0.200 3.63 xs 80 40 48.3 5.08 5.41

2.375 0.065 1.61 ... 5 50 60.3 1.65 2.39

2.375 0.141 3.37 ... ... 50 60.3 3.58 5.01

2.375 0.218 5.03 xs 80 50 60.3 5.54 7.48

2.875 0.083 2.48 ... 5 65 73.0 2.1 1 3.69

2.875 O. 141 4.1 2 ... ... 65 73.0 3.58 6.1 3

2.875 0.203 5.80 STD 40 65 73.0 5.16 8.63

2.875 0.375 10.02 ... 160 65 73.0 9.53 14.92

3.500 0.083 3.03 ... 5 80 88.9 2.11 4.52

3.500 0.141 5.06 ... ... 80 88.9 3.58 7.53

COPYRIGHT American Society of Mechanical Engineers

TABLE 1 DIMENSIONS AND WEIGHTS OF

3.500 0.250 8.69 ... ... 80 88.9 6.35 12.93

4.000 0.083 3.48 ... 5 90 101.6 2.1 1 5.18

4.000 0.141 5.82 ... ... 90 101.6 3.58 8.65

4.000 0.226 9.12 STD 40 90 101.6 5.74 13.57

4.500 0.083 3.92 ... 5 1 O0 114.3 2.1 1 5.84

4.500 0.141 6.57 ... ... 1 O0 1 14.3 3.58 9.78

4.500 0.203 9.32 ... ... 1 O0 114.3 5.16 13.89

4.500 0.281 12.67 ... ... 1 O0 114.3 7.14 18.87

4.500 0.531 22.53 ... 160 1 O0 114.3 13.49 33.54

5.563 0.083 4.86 ... ... 125 141.3 2.11 7.24

5.563 0.1 56 9.02 ... ... 125 141.3 3.96 13.41

COPYRIGHT American Society of Mechanical Engineers

TABLE 1 DIMENSIONS AND WEIGHTS OF

6 6.625 0.083 5.80 ... ... 150 168.3 2.1 1 8.65