Group 2 Specifications: 1. Major Component
Group 2 Specifications: 1. Major Component
Group 2 Specifications: 1. Major Component
1. MAJOR COMPONENT
Engine
Radiator
Tooth Bucket Turning joint Swing motor Main control valve Battery Oil cooler
1-9
2. SPECIFICATIONS
I(I’) D
C
E
G
F
H
J M
K N
A B(L)
1-10
3. WORKING RANGE
1) 6.25m(20' 6") BOOM
A
A'
F
D
B' E
C
B
8ft
Description 2.10m(6' 11") Arm 2.50m(8' 2") Arm 3.05m(10' 0") Arm 3.75m(12' 4") Arm
Max digging reach A 10020mm (32'10") 10280mm (33' 7") 10820mm (35' 6") 11400mm (37' 5")
Max digging reach on ground A' 9820mm (32' 3") 10080mm (33' 1") 10620mm (34'10") 11220mm (36'10")
Max digging depth B 6440mm (21' 1") 6840mm (22' 5") 7500mm (24' 7") 8090mm (26' 7")
Max digging depth (8ft level) B' 6240mm (20' 6") 6630mm (21' 9") 7300mm (23'11") 7920mm (26' 0")
Max vertical wall digging depth C 6000mm (19' 8") 5850mm (19' 2") 6410mm (21' 0") 7080mm (23' 3")
Max digging height D 10070mm (33' 0") 10110mm (33' 2") 10160mm (33' 4") 10360mm (34' 0")
Max dumping height E 6940mm (22' 9") 7030mm (23' 1") 7110mm (23' 4") 7310mm (24' 0")
Min swing radius F 4380mm (14' 4") 4260mm (14' 0") 4230mm (13'11") 4140mm (13' 7")
169[184] kN 169[184] kN 169[184] kN 169[184] kN
SAE 17200[18760] kgf 17200[18760] kgf 17200[18760] kgf 17200[18760] kgf
37920[41370] lbf 37920[41370] lbf 37920[41370] lbf 37920[41370] lbf
Bucket digging force
192[210] kN 192[210] kN 192[210] kN 192[210] kN
ISO 19600[21380] kgf 19600[21380] kgf 19600[21380] kgf 19600[21380] kgf
43210[47140] lbf 43210[47140] lbf 43210[47140] lbf 43210[47140] lbf
170[185] kN 147[161] kN 124[135] kN 109[119] kN
SAE 17300[18870] kgf 15000[16360] kgf 12600[13750] kgf 11100[12110] kgf
38140[41610] lbf 33070[36080] lbf 27780[30310] lbf 24470[26690] lbf
Arm crowd force
178[194] kN 154[168] kN 129[140] kN 112[122] kN
ISO 18100[19750] kgf 15700[17130] kgf 13100[14290] kgf 11400[12440] kgf
39900[43530] lbf 34610[37760] lbf 28880[31510] lbf 25130[27410] lbf
[ ] : Power boost
1-11
4. WEIGHT
R290LC-7
Item
kg lb
Upperstructure assembly 12610 27800
Main frame weld assembly 2361 5210
Engine assembly 590 1300
Main pump assembly 155 340
Main control valve assembly 200 442
Swing motor assembly 311 687
Hydraulic oil tank assembly 227 500
Fuel tank assembly 209 460
Counterweight 4700 10090
Cab assembly 310 680
Lower chassis assembly 10740 23680
Track frame weld assembly 3765 8310
Swing bearing 410 910
Travel motor assembly 350 770
Turning joint 54 240
Track recoil spring and idler 457 1010
Idler 252 560
Carrier roller 40 88
Track roller 54 119
Track-chain assembly(600mm standard triple grouser shoe) 1860 4110
Front attachment assembly(6.25m boom, 3.05m arm,
5450 12020
1.27m3 PCSA heaped bucket)
6.25m boom assembly 2200 4860
3.05m arm assembly 975 2150
1.27m3 PCSA heaped bucket 960 2120
Boom cylinder assembly 290 640
Arm cylinder assembly 375 826
Bucket cylinder assembly 250 551
Bucket control rod assembly 112 248
1-12
5. LIFTING CAPACITIES
1) 6.25m(20' 6") boom, 2.10m(6' 11") arm equipped with 1.27m3(PCSA heaped) bucket and 600mm
(24") triple grouser shoe.
1-13
2) 6.25m(20' 6") boom, 2.50m(8' 2") arm equipped with 1.27m3(PCSA heaped) bucket and 600mm
(24") triple grouser shoe.
3) 6.25m(20' 6") boom, 3.05m(10' 0") arm equipped with 1.27m3(PCSA heaped) bucket and 600mm
(24") triple grouser shoe.
1-14
4) 6.25m(20' 6") boom, 3.75m(12' 4") arm equipped with 1.27m3(PCSA heaped) bucket and 600mm
(24") triple grouser shoe.
1-15
6. BUCKET SELECTION GUIDE
1) GENERAL BUCKET
0.79m3 PCSA 1.03m3 PCSA ※1.27m3 PCSA 1.50m3 PCSA 1.73m3 PCSA 1.85m3 PCSA
heaped bucket heaped bucket heaped bucket heaped bucket heaped bucket heaped bucket
Recommendation
Capacity Width 6.25m (20' 6") boom
Weight
PCSA CECE Without With 2.1m arm 2.5m arm 3.05m arm 3.6m arm
heaped heaped side cutter side cutter (6' 11") (8' 2") (10' 0") (11' 10")
※ : Standard bucket
1-16
2) ROCK AND HEAVY DUTY BUCKET
Recommendation
Capacity Width
6.25m (20' 6") boom
Weight
PCSA CECE Without With 2.1m arm 2.5m arm 3.05m arm 3.6m arm
heaped heaped side cutter side cutter (6' 11") (8' 2") (10' 0") (11' 10")
1-17
7. UNDERCARRIAGE
1) TRACKS
X-leg type center frame is integrally welded with reinforced box-section track frames. The design
includes dry tracks, lubricated rollers, idlers, sprockets, hydraulic track adjusters with shock
absorbing springs and assembled track-type tractor shoes with triple grousers.
2) TYPES OF SHOES
Triple grouser
Model Shapes
Item Quantity
Carrier rollers 2EA
Track rollers 9EA
Track shoes 48EA
1-18
※ Table 2
Category Applications Precautions
Rocky ground, ・ Travel at low speed on rough ground with large obstacles such as
A river beds, boulders or fallen trees
normal soil
Normal soil, ・ These shoes cannot be used on rough ground with large obstacles such
soft ground as boulders or fallen trees
B ・ Travel at high speed only on flat ground
・ Travel slowly at low speed if it is impossible to avoid going over
obstacles
Extremely soft gound ・ Use the shoes only in the conditions that the machine sinks and it is
(Swampy ground) impossible to use the shoes of category A or B
・ These shoes cannot be used on rough ground with large obstacles such
C as boulders or fallen trees
・ Travel at high speed only on flat ground
・ Travel slowly at low speed if it is impossible to avoid going over
obstacles
1-19
8. SPECIFICATIONS FOR MAJOR COMPONENTS
1) ENGINE
Item Specification
2) MAIN PUMP
Item Specification
1-20
3) GEAR PUMP
Item Specification
Item Specification
Type 9 spools
Operating method Hydraulic pilot system
Main relief valve pressure 330kgf/cm2(4690psi)[360kgf/cm2(5120psi)]
Overload relief valve pressure 390kgf/cm2(5550psi)
[ ]: Power boost
5) SWING MOTOR
Item Specification
6) TRAVEL MOTOR
Item Specification
Type Variable displacement axial piston motor
Relief pressure 330kgf/cm2(4620psi)
Capacity(max / min) 134.7/87.3cc/rev
Reduction gear type 3-stage planetary
Braking system Automatic, spring applied hydraulic released
Brake release pressure 15.7kgf/cm2(223psi)
Braking torque 78.8kgf・m(570lbf・ft)
1-21
7) REMOTE CONTROL VALVE
Item Specification
8) CYLINDER
Item Specification
9) SHOE
1-22
10) BUCKET
Capacity Tooth Width
Item quantity Without side cutter With side cutter
PCSA heaped CECE heaped
Standard 1.27m3(1.66yd3) 1.10m3(1.44yd3) 5 1290mm(50.8") 1410mm(55.5")
0.79m3(1.03yd3) 0.70m3(0.92yd3) 3 890mm(35.0") 1010mm(39.8")
1.03m3(1.35yd3) 0.90m3(1.18yd3) 4 1090mm(42.9") 1210mm(47.6")
◈1.07m3(1.40yd3) 0.95m3(1.24yd3) 5 1060mm(42.0") -
◈1.27m3(1.66yd3) 1.10m3(1.44yd3) 5 1220mm(48.0") -
R290LC-7
Option ◈1.46m3(1.91yd3) 1.28m3(1.67yd3) 5 1370mm(54.0") -
1.16m3(1.52yd3) 1.00m3(1.05yd3) 5 1305mm(51.4") -
1.50m3(1.96yd3) 1.30m3(1.70yd3) 6 1490mm(58.7") 1610mm(63.4")
1.73m3(2.26yd3) 1.50m3(1.96yd3) 6 1696mm(66.8") -
1.85m3(2.42yd3) 1.60m3(2.09yd3) 5 1800mm(70.9") -
1-23
9. RECOMMENDED OILS
Use only oils listed below or equivalent.
Do not mix different brand oil.
Ambient temperature °
C (°
F)
Capacity
Service point Kind of fluid ℓ(U.S. gal) -20 -10 0 10 20 30 40
(-4) (14) (32) (50) (68) (86) (104)
SAE 30
SAE 15W-40
Tank; ISO VG 32
210(55)
Hydraulic tank Hydraulic oil ISO VG 46
System;
380(100) ISO VG 68
NLGI NO.1
Fitting Grease As required
(Grease nipple)
NLGI NO.2
Mixture of
Radiator antifreeze
(Reservoir tank) 50(13.2) Ethylene glycol base permanent type
and water
50 : 50
1-24