SETUP
SETUP
SETUP
02Can I upgrade from the evaluation edition of Exchange 2003 Enterprise Server to the RTM standard
version of Exchange 2003 Server?
No this is technically a downgrade from enterprise to standard. You can only upgrade the evaluation version
of Exchange 2003 Enterprise to Exchange 2003 Enterprise RTM.
03How can you tell how many days remain until the evaluation copy of Exchange 2000 Server expires?
The Exchange Server Setup Progress Log includes the date on which the Exchange server was installed. Take
the difference between that date and today’s date and subtract it from 120 to determine how many days
remain in your evaluation.
No. Install a full version of Exchange 2000 Enterprise and you can continue to use your existing databases.
05I plan to run Exchange in a hosted environment, where can I find information on how to configure my
Exchange server to host multiple companies
The EXIFS (M: drive) feature has been disabled by default. If the feature is still needed, it can be assigned to
an available drive letter with a registry setting.
NO. Windows 2003 uses IIS 6.0, which has been re-engineered to keep up with best practices and industry
standards. Windows 2003 has an IIS 5.0 compatibility mode, however, it is not compatible with Exchange 5.5
or Exchange 2000. Therefore, neither Exchange Systems are compatible with Windows 2003.
08Can I run Exchange 2000 with an AD infrastructure with Windows 2003 DC’s?
YES, all exchange versions will run in an AD 2003 environment. Exchange 2000 will benefit from some of the
new features in AD 2003 and Exchange 5.5 has an ADC specifically for an Exchange 5.5/ AD 2003
environment. If AD 2000 is upgraded to AD 2003, the ADC will need to be upgraded also.*
NO. Microsoft will not support any deployment of Beta 2 into a production environment. Their official
position is, “Exchange 2003 Beta 2 should not be deployed in a production environment. You can deploy
Exchange 2003 Beta 2 in a test environment only.
NO. In place upgrades to Exchange 2003 must already be Exchange 2000 SP3 and Windows 2000 SP3 or later.
The only upgrade paths from 5.5 to 2003 are; an in place upgrade to Exchange 2000 then an in place upgrade
to Exchange 2003 or the leap frog migration which requires another server.
Since Exchange 5.5 can not be upgraded in place, The Active Directory should be upgraded to AD 2003, setup
the new ADC and then install a new Exchange 2003 server. Then move users from 5.5 to 2003.
The Exchange Instant Messaging Service is being replaced by the Microsoft Office Real-Time Communications
(RTC) server. It is no longer a component of the Exchange Server.
13What are the Supported FE/BE scenarios? (i.e. E2003 FE with E2k BE etc.)
It is not sufficient to simply upgrade front-end servers to Exchange 2003 for users to get the new interface.
Interface matrix
Ability to Reply and Forward to Messages and Posts in Public Folders is only enabled when the client is using
a front-end server. Forms-based authentication (FBA) is functional for deployments where the FE is Exchange
2003, but the mailbox is still on Exchange 2000. However, session timeouts are handled much better if the
BE are also Exchange 2003
Client
Server-side
When used with the Microsoft Windows Server 2003 RPC Proxy Service and Exchange 2003, Outlook 2003
clients can connect simply using HTTP or HTTPS, thereby reducing the need for virtual private networks
(VPNs) or dial-up remote access. If remote users only need to gain access to corporate messaging
information, your IT department may not need to deploy VPN infrastructure. VPN-less access reduces costs
and provides for increased security by ensuring that remote Outlook users don’t need access to the entire
network.
I’m running Exchange 5.5 and would like to upgrade to Exchange 2003. Can I upgrade directly?
No. The only supported upgrade in place is from Exchange 2000 SP3 or later. You would need to first upgrade
your Exchange 5.5 server to at least Exchange 2000 SP3 and then upgrade in place to Exchange 2003.
Another option is to exmerge out your current users and exmerge them into an Exchange 2003 server. And
the only other option is called the leap frog migration. You configure the Active Directory Connector (ADC)
for Exchange 2003 between the Active Directory and Exchange 5.5 Directory Service. Install a new Exchange
2003 server into the enterprise and move the Exchange 5.5 users to Exchange 2003.
18Can I rename or move the default groups created by Exchange during domainprep and forestprep?
The minimum practical hardware requirements in our experience are 1.25 times the disk space one would
allocate under Exchange 2000, 1GB RAM (4GB minimum if the Exchange server also serves any other
function) and the fastest processor(s) you can afford.
20Am I better off with one really fast processor or two somewhat slower processors?
You’re better off with two really fast processors. But, with all other things being equal, two processors are
better than one with Exchange 2003. In most instances, a 2-processor machine would be preferable.
No. Only a single E2K3 organization can exist within a single forest. Delegation of administration within the
organization can be accomplished using OUs in AD and Administrative/ Routing Groups in the Exchange
system manager.
A partial list of the ports your Exchange server might use is included below
25 SMTP
53 DNS
80 HTTP
88 Kerberos
102 X.400
110 POP3
119 NNTP
135 RPC
143 IMAP4
389 LDAP
691 LSA
993 IMAP4 (SSL)
1503 T.120
1720 H.323
1863 – MSN IM
3268 GC
3269 GC (SSL)
6667 IRC/IRCX
A: Do Not delete the Default Domain Policy or Default Domain Controller Policy in your Active Directory.
The Exchange domain prep operation targets a policy with GUID 6AC1786C-016F-11D2-945F-00C04fB984F9 for
its operations. If it doesn’t find it, domain prep will fail.