C153 Mechanical Joint Ductile Iron Fittings

3" - 48" Ductile Iron Mechanical Joint Fittings Class

MATERIAL: Ductile Iron ASTM A536, Grade 65-45-12, 60-42-10 or 70-50-05.

PRESSURE: 350PSI WATER WORKING PRESSURE (CLASS 350) 3” - 24”: & 250 PSI 30” - 48”.

TESTING: In accordance with ANSI / AWWA C153 / A21.53 & UL - FM requirements.

LAYING LENGTH: Short body design - straight section of body deleted to provide a compact and lighter fitting without
reducing strength or flow characterisitics, in accordance with ANSI / AWWA C153 / A21.53.

DEFLECTION: 2”- 4”=8°, 6”=7°, 8”-12”=5°, 14”-16”=3 ½°, 18”-24”=3°, 30”-48”=2°

CEMENT LINING: In accordance with ANSI / AWWA C104 / A21.4.

COATING: Interior of fitting is seal coated (asphaltic material) in accordance with ANSI / AWWA C104 / A21.4
and NSF61 approved.

COATING: Exterior of fitting is seal coated (asphaltic material) in accordance with ANSI / AWWA C153/A21.53
and NSF approved.

GASKETS: SBR in accordance with ANSI / AWWA C111 / A21.11. Also available in EDPM, NBR and CR.

T-BOLTS: Low Alloy corrosion resistant high strength steel in accordance with ANSI / AWWA C111 / A21.11.

APPROVALS: 3”-16” Underwriters Laboratories listed and Factory Mutual Approved.

STANDARDS: Certified to NSF61 Standard ANSI / AWWA C153 / A21.53 for Compact Ductile Iron Fittings 3”-48”
for water and other liquids.
®

Note: 2” - 24” also available in Fusion Bonded Epoxy ®

® Certified to
ANSI/NSF 61

Member

SIGMA Corporation 700 Goldman Drive 800 999 2550 p www.sigmaco.com

Cream Ridge, NJ 08514 609 758 1163 f
crm-sales@sigmaco.com
 C153 Mechanical Joint Compact Fittings

Mechanical Joint Details Plain End Detail

Bolts
Size A B C D F J K1 K2 L M P S X
No Size Len PE Ls
3 3.96 2.50 4.84 4.94 4.06 6.19 7.62 7.69 0.58 0.62 0.63 0.39 3/4 4 5/8 3.0 5.5
4 4.80 2.50 5.92 6.02 4.90 7.50 9.06 9.12 0.60 0.75 0.75 0.39 7/8 4 3/4 3.5 5.5
6 6.90 2.50 8.02 8.12 7.00 9.50 11.06 11.12 0.63 0.88 0.75 0.43 7/8 6 3/4 3.5 5.5
8 9.05 2.50 10.17 10.27 9.15 11.75 13.31 13.37 0.66 1.00 0.75 0.45 7/8 6 3/4 3.5 5.5
10 11.10 2.50 12.22 12.34 11.20 14.00 15.62 15.62 0.70 1.00 0.75 0.47 7/8 8 3/4 3.5 5.5
12 13.20 2.50 14.32 14.44 13.30 16.25 17.88 17.88 0.73 1.00 0.75 0.49 7/8 8 3/4 3.5 5.5
14 15.30 3.50 16.40 16.54 15.44 18.75 20.25 20.25 0.79 1.25 0.75 0.55 7/8 10 3/4 4.0 8.0
16 17.40 3.50 18.50 18.64 17.54 21.00 22.50 22.50 0.85 1.31 0.75 0.58 7/8 12 3/4 4.0 8.0
18 19.50 3.50 20.60 20.74 19.64 23.25 24.83 24.75 1.00 1.38 0.75 0.68 7/8 12 3/4 4.0 8.0
20 21.60 3.50 22.70 22.84 21.74 25.50 27.08 27.00 1.02 1.44 0.75 0.69 7/8 14 3/4 4.0 8.0
24 25.80 3.50 26.90 27.04 25.94 30.00 31.58 31.50 1.02 1.56 0.75 0.75 7/8 16 3/4 4.5 8.0
30 32.00 4.00 33.29 33.46 32.17 36.88 39.12 39.12 1.31 2.00 1.00 0.82 1 1/8 20 1 5.5 8.0
36 38.30 4.00 39.59 39.76 38.47 43.75 46.00 46.00 1.45 2.00 1.00 1.00 1 1/8 24 1 5.5 8.0
42 44.50 4.00 45.79 45.96 44.67 50.62 53.12 53.12 1.45 2.00 1.00 1.25 1 3/8 28 1 1/4 6.0 8.0
48 50.80 4.00 52.09 52.26 50.97 57.50 60.00 60.00 1.45 2.00 1.00 1.35 1 3/8 32 1 1/4 6.0 8.0

54” fittings & dimensions available upon request

Weights in Pounds, Less Accessories / Dimensions in inches

Ductile Iron Class 350 per ANSI/AWWA C153/A21.53 ®

2 SIGMA Corporation www.sigmaco.com ® Certified to

® ANSI/NSF 61

Member
 90 Degree Bends
MJ x MJ MJ x PE
Size Item No. Wt. A Item No. Wt. A B T
2 DMB290 17 3.00 0.30
3 DMB390 19 3.50 DME390 16 3.25 8.50 0.33
4 DMB490 25 4.00 DME490 22 4.00 9.50 0.34
6 DMB690 39 5.00 DME690 41 5.00 11.50 0.36
8 DMB890 57 6.50 DME890 58 6.50 12.50 0.38
10 DMB1090 89 7.50 DME1090 88 7.50 13.00 0.40 MJ x MJ Bend 90
12 DMB1290 108 9.00 DME1290 114 9.00 14.50 0.42
14 DMB1490 210 11.50 DME1490 211 11.50 19.50 0.47
16 DMB1690 264 12.50 DME1690 248 12.50 20.50 0.50
18 DMB1890 335 14.00 DME1890 325 14.00 21.00 0.54
20 DMB2090 400 15.00 DME2090 390 15.00 22.50 0.57
24 DMB2490 565 16.75 DME2490 575 17.00 25.00 0.61
30 DMB3090 930 21.50 DME3090 865 21.50 30.50 0.66
36 DMB3690 1,450 24.50 DME3690 1,355 24.50 33.50 0.74
42 DMB4290 2,205 29.25 DME4290 2,055 29.25 38.25 0.82
48 DMB4890 2,990 33.25 DME4890 2,805 33.25 42.25 0.90 MJ x PE Bend 90

45 Degree Bends
MJ x MJ MJ x PE
Size Item No. Wt. A Item No. Wt. A B T
2 DMB245 10 1.50 0.30
3 DMB345 16 1.50 DME345 13 1.50 7.00 0.33
4 DMB445 22 2.00 DME445 19 2.00 7.50 0.34
6 DMB645 32 3.00 DME645 34 3.00 8.50 0.36
8 DMB845 46 3.50 DME845 49 3.50 9.00 0.38
10 DMB1045 70 4.50 DME1045 70 4.50 10.00 0.40
12 DMB1245 86 5.50 DME1245 93 5.50 11.00 0.42 MJ x MJ Bend 45
14 DMB1445 160 5.00 DME1445 146 5.00 13.00 0.47
16 DMB1645 202 5.50 DME1645 212 5.50 13.50 0.50
18 DMB1845 250 6.00 DME1845 235 6.00 13.00 0.54
20 DMB2045 305 7.00 DME2045 290 7.00 14.00 0.57
24 DMB2445 405 7.50 DME2445 390 7.50 14.50 0.61
30 DMB3045 780 10.50 DME3045 715 10.50 19.50 0.66
36 DMB3645 1135 11.50 DME3645 1,040 12.00 21.00 0.74
42 DMB4245 1610 14.00 DME4245 1,460 14.00 23.00 0.82
48 DMB4845 2090 15.00 DME4845 1,905 15.00 24.00 0.90
MJ x PE Bend 45

22 1/2 Degree Bends

MJ x MJ MJ x PE
Size Item No. Wt. A Item No. Wt. A B T
3 DMB322 15 1.00 DME322 12 1.00 6.50 0.33
4 DMB422 18 1.50 DME422 18 1.50 7.00 0.34
6 DMB622 31 2.00 DME622 29 2.00 7.50 0.36
8 DMB822 46 2.50 DME822 43 2.50 8.00 0.38
10 DMB1022 64 3.00 DME1022 61 3.00 8.50 0.40
12 DMB1222 80 3.50 DME1222 79 3.50 9.00 0.42 MJ x MJ Bend 22-1/2
14 DMB1422 136 3.75 DME1422 133 3.75 11.25 0.47
16 DMB1622 172 3.75 DME1622 166 3.75 11.75 0.50
18 DMB1822 255 4.50 DME1822 235 6.00 13.00 0.54
20 DMB2022 310 4.50 DME2022 300 7.00 14.00 0.57
24 DMB2422 412 4.50 DME2422 395 7.50 14.50 0.61
30 DMB3022 665 6.75 DME3022 600 6.75 15.75 0.66
36 DMB3622 960 7.75 DME3622 865 7.75 16.75 0.74
42 DMB4222 1350 9.00 DME4222 1,200 9.00 18.00 0.82
48 DMB4822 1760 10.00 DME4822 1,575 10.00 19.00 0.90 MJ x PE Bend 22-1/2

Weights in Pounds, Less Accessories / Dimensions in inches

® Ductile Iron Class 350 per ANSI/AWWA C153/A21.53
® Certified to
SIGMA Corporation www.sigmaco.com 3
® ANSI/NSF 61

Member
 C153 Mechanical Joint Compact Fittings

11-1/4 Degree Bends

MJ x MJ MJ x PE
Size Item No. Wt. A Item No. Wt. A B T
3 DMB311 14 1.00 DME311 12 1.00 6.50 0.33
4 DMB411 16 1.25 DME411 17 1.25 6.25 0.34
6 DMB611 30 1.50 DME611 27 1.50 7.00 0.36
8 DMB811 42 1.75 DME811 39 1.75 7.25 0.38
10 DMB1011 58 2.00 DME1011 52 2.00 7.50 0.40
12 DMB1211 67 2.25 DME1211 69 2.25 7.75 0.42 MJ x MJ Bend 11-1/4
14 DMB1411 93 2.50 DME1411 118 2.50 10.50 0.47
16 DMB1611 148 2.50 DME1611 136 2.50 10.50 0.50
18 DMB1811 205 3.00 DME1811 235 6.00 13.00 0.54
20 DMB2011 245 3.00 DME2011 300 7.00 14.00 0.57
24 DMB2411 315 3.00 DME2411 400 7.50 14.50 0.61
30 DMB3011 600 4.75 DME3011 535 4.75 13.75 0.66
36 DMB3611 820 5.00 DME3611 725 5.00 14.00 0.74
42 DMB4211 1,180 6.00 DME4112 1,030 6.00 15.00 0.82
48 DMB4811 1,475 6.50 DME4811 1,290 6.50 15.50 0.90

MJ x PE Bend 11-1/4
90° Bends: MJ X Flange
Size Item No. A S T Wt.
3 MFB390 3.50 5.50 0.33 21
4 MFB490 4.00 6.50 0.34 28
6 MFB690 5.00 8.00 0.36 46
8 MFB890 6.50 9.00 0.38 71
10 MFB1090 7.50 11.00 0.40 121
12 MFB1290 9.00 12.00 0.42 155
14 MFB1490 11.50 14.00 0.47 208
16 MFB1690 12.50 15.00 0.50 280
18 MFB1890 14.00 16.50 0.54 332
20 MFB2090 15.00 18.00 0.57 441
24 MFB2490 16.75 22.00 0.61 618
30 MFB3090 21.50 25.00 0.66 994
36 MFB3690 24.50 28.00 0.74 1462
42 MFB4290 29.25 31.00 0.82 2112
MJ x Flange 90º Bend
48 MFB4890 33.25 34.00 0.90 2816

45° Bends: MJ x Flange

Size Item No. A S T Wt.
3 MFB345 1.50 3.00 0.33 17
4 MFB445 2.00 4.00 0.34 34
6 MFB645 3.00 5.00 0.36 57
8 MFB845 3.50 5.50 0.38 83
10 MFB1045 4.50 6.50 0.40 122
12 MFB1245 5.50 7.50 0.42 159
14 MFB1445 5.00 7.50 0.47 162
16 MFB1645 5.50 8.00 0.50 290
18 MFB1845 6.00 8.50 0.54 252
20 MFB2045 7.00 9.50 0.57 338
24 MFB2445 7.50 11.00 0.61 442
30 MFB3045 10.50 15.00 0.66 765
MJ x Flange 45º Bend
36 MFB3645 11.50 18.00 0.74 1167
42 MFB4245 14.00 21.00 0.82 1720
48 MFB4845 15.00 24.00 0.90 2276

Weights in Pounds, Less Accessories / Dimensions in inches

Ductile Iron Class 350 per ANSI/AWWA C153/A21.53 ®

4 SIGMA Corporation www.sigmaco.com ® Certified to

® ANSI/NSF 61

Member
22 1/2° Bends: MJ X Flange
Size Item No. A S T Wt.
3 MFB322 1.00 3.00 0.33 15
4 MFB422 1.50 4.00 0.34 23
6 MFB622 2.00 5.00 0.36 37
8 MFB822 2.50 5.50 0.38 56
10 MFB1022 3.00 6.50 0.40 81
12 MFB1222 3.50 7.50 0.42 114
14 MFB1422 3.75 7.50 0.47 158
16 MFB1622 3.75 8.00 0.50 198
18 MFB1822 4.50 8.50 0.54 244
20 MFB2022 4.50 9.50 0.57 317
24 MFB2422 4.50 11.00 0.61 417
30 MFB3022 6.75 15.00 0.66 723
36 MFB3622 7.75 18.00 0.74 1108 MJ x Flange 22 1/2º Bend
42 MFB4222 9.00 21.00 0.82 1583
48 MFB4822 10.00 24.00 0.90 2156

11 1/4° Bends: MJ X Flange

Size Item No. A S T Wt.
3 MFB311 1.00 3.00 0.33 15
4 MFB411 1.25 4.00 0.34 23
6 MFB611 1.50 5.00 0.36 36
8 MFB811 1.75 5.50 0.38 54
10 MFB1011 2.00 6.50 0.40 78
12 MFB1211 2.25 7.50 0.42 110
14 MFB1411 2.50 7.50 0.47 148
16 MFB1611 2.50 8.00 0.50 187
18 MFB1811 3.00 8.50 0.54 229
20 MFB2011 3.00 9.50 0.57 284
24 MFB2411 3.00 11.00 0.61 395
30 MFB3011 4.75 15.00 0.66 683
36 MFB3611 5.00 18.00 0.74 1042 MJ x Flange 11 1/4º Bend
42 MFB4211 6.00 21.00 0.82 1528
48 MFB4811 6.50 24.00 0.90 2024

Adapters: MJ X Flange
Size Item No. L T Wt.
3 MFA3 3.50 0.33 18
4 MFA4 3.50 0.34 24
6 MFA6 3.50 0.36 36
8 MFA8 3.75 0.38 52
10 MFA10 3.75 0.40 67
12 MFAl2 3.75 0.42 80
14 MFA14 5.00 0.47 126
16 MFA16 5.00 0.50 166
18 MFA18 5.00 0.54 206
20 MFA20 5.00 0.57 275
24 MFA24 5.00 0.61 324
30 MFA30 7.00 0.66 420
36 MFA36 7.00 0.74 710 MJ x Flange Adapters
42 MFA42 7.00 0.82 993
48 MFA48 7.00 0.90 1225

Weights in Pounds, Less Accessories / Dimensions in inches

® Ductile Iron Class 350 per ANSI/AWWA C153/A21.53
® Certified to
SIGMA Corporation www.sigmaco.com 5
® ANSI/NSF 61

Member
 C153 Mechanical Joint Compact Fittings
Crosses
Size
Item No. H J T T1 Wt.
Run Branch
3 3 DMC33 3.00 3.00 0.33 0.33 35
4 3 DMC43 3.50 4.00 0.34 0.33 49
4 4 DMC44 4.00 4.00 0.34 0.34 40
6 3 DMC63 3.50 5.00 0.36 0.33 49
6 4 DMC64 4.00 5.00 0.36 0.34 68
6 6 DMC66 5.00 5.00 0.36 0.36 75
8 4 DMC84 4.00 6.50 0.38 0.34 99
8 6 DMC86 5.00 6.50 0.38 0.36 108
8 8 DMC88 6.00 6.00 0.38 0.38 105
10 3 DMC103 3.00 7.50 0.40 0.33 115
10 4 DMC104 4.00 7.50 0.40 0.34 98
10 6 DMC106 5.00 7.50 0.40 0.36 118
10 8 DMC108 6.50 7.50 0.40 0.38 138
10 10 DMC1010 7.00 7.00 0.40 0.40 145
12 4 DMC124 4.00 8.75 0.42 0.34 100
12 6 DMC126 5.00 8.75 0.42 0.36 140
12 8 DMC128 6.50 8.75 0.42 0.38 162
12 10 DMC1210 7.50 8.75 0.42 0.40 190
12 12 DMC1212 8.50 8.50 0.42 0.42 213
14 4 DMC144 5.50 10.50 0.47 0.34 162
14 6 DMC146 6.50 10.50 0.47 0.36 181
14 8 DMC148 7.50 10.50 0.47 0.38 259
14 10 DMC1410 8.50 10.50 0.47 0.40 223
14 12 DMC1412 9.50 10.50 0.47 0.42 244
14 14 DMC 1414 10.50 10.50 0.47 0.47 299
16 6 DMC166 6.50 11.50 0.50 0.36 250
16 8 DMC168 7.50 11.50 0.50 0.38 289
16 10 DMC 1610 8.50 11.50 0.50 0.40 345
16 12 DMC 1612 9.50 11.50 0.50 0.42 397
16 14 DMC1614 10.50 11.50 0.50 0.47 333 DMC
16 16 DMC 1616 11.50 11.50 0.50 0.50 385
18 6 DMC186 6.50 12.50 0.54 0.36 260
18 8 DMC188 7.50 12.50 0.54 0.38 282
18 10 DMC1810 8.50 12.50 0.54 0.40 308
18 12 DMC1812 9.50 12.50 0.54 0.42 x
18 14 DMC1814 10.50 12.50 0.54 0.47 384
18 16 DMC1816 11.50 12.50 0.54 0.50 x
18 18 DMC1818 12.50 12.50 0.54 0.54 630
20 6 DMC206 6.50 14.00 0.57 0.36 306
20 8 DMC208 8.00 14.00 0.57 0.38 341
20 10 DMC2010 9.00 14.00 0.57 0.40 370
20 12 DMC2012 10.00 14.00 0.57 0.42 392
20 14 DMC2014 11.00 14.00 0.57 0.47 451
20 16 DMC2016 12.00 14.00 0.57 0.50 634
20 18 DMC2018 13.00 14.00 0.57 0.54 547
20 20 DMC2020 14.00 14.00 0.57 0.57 605
24 6 DMC246 7.00 16.00 0.61 0.36 403
24 8 DMC248 8.00 16.00 0.61 0.38 431
24 10 DMC2410 9.00 16.00 0.61 0.40 465
24 12 DMC2412 10.00 16.00 0.61 0.42 494
24 14 DMC2414 11.00 16.00 0.61 0.47 553
24 16 DMC2416 12.00 16.00 0.61 0.50 714
24 18 DMC2418 13.00 16.00 0.61 0.54 x
24 20 DMC2420 14.00 16.00 0.61 0.57 809
24 24 DMC2424 16.00 16.00 0.61 0.61 830
30 6 DMC306 8.50 20.00 0.66 0.36 664
30 8 DMC308 8.50 20.00 0.66 0.38 670
30 12 DMC3012 10.00 20.00 0.66 0.42 733
30 16 DMC3016 12.50 20.00 0.66 0.50 866
Weights in Pounds, Less Accessories / Dimensions in inches
Ductile Iron Class 350 per ANSI/AWWA C153/A21.53 ®

6 SIGMA Corporation www.sigmaco.com ® Certified to

® ANSI/NSF 61

Member
Crosses (continued)
Size
Item No. H J T T1 Wt.
Run Branch
30 20 DMC3020 15.00 20.00 0.66 0.57 991
30 24 DMC3024 16.00 20.00 0.66 0.61 1083
30 30 DMC3030 22.00 22.00 0.66 0.66 1840
36 24 DMC3624 16.00 23.50 0.74 0.61 x
36 30 DMC3630 20.00 23.50 0.74 0.66 x
36 36 DMC3636 26.00 26.00 0.74 0.74 2655
42 12 DMC4212 12.50 27.50 0.82 0.42 1511
42 16 DMC4216 13.00 27.50 0.82 0.50 1578
42 24 DMC4224 20.00 27.50 0.82 0.61 2055
42 30 DMC4230 22.00 29.50 0.82 0.66 2950
42 36 DMC4236 30.00 30.00 0.82 0.74 3955
42 42 DMC4242 30.00 30.00 0.82 0.82 3725
48 12 DMC4812 12.50 32.00 0.90 0.42 1897 DMC
48 16 DMC4816 23.00 32.00 0.90 0.50 2617
48 24 DMC4824 23.00 32.00 0.90 0.61 2766
48 30 DMC4830 23.00 32.00 0.90 0.66 4500
48 36 DMC4836 33.50 32.25 0.90 0.74 3719
48 42 DMC4842 33.5 33.5 0.90 0.82 4590
48 48 DMC4848 33.5 33.5 0.90 0.90 4955
Tees
SIZE MJ x MJ MJ x Flange
Run Branch Item No. Wt. H J T T1 Item No. Wt. H L
2 2 DMT22 16 3.00 3.00 0.30 0.30
3 3 DMT33 28 3.00 3.00 0.33 0.33 DMF33 28 3.00 5.50
4 2 DMT42 29 3.00 4.00 0.34 0.30
4 3 DMT43 30 3.50 4.00 0.34 0.33 DMF43 30 3.50 6.50
4 4 DMT44 32 4.00 4.00 0.34 0.34 DMF44 38 4.00 6.50
6 3 DMT63 42 3.50 5.00 0.36 0.33 DMF63 51 3.50 8.00
6 4 DMT64 46 4.00 5.00 0.36 0.34 DMF64 54 4.00 8.00
6 6 DMT66 56 5.00 5.00 0.36 0.36 DMF66 56 5.00 8.00
8 3 DMT83 52 4.00 6.50 0.38 0.33 DMF83 70 4.00 9.00
8 4 DMT84 60 4.00 6.50 0.38 0.34 DMF84 72 4.00 9.00
8 6 DMT86 72 5.00 6.50 0.38 0.36 DMF86 83 5.00 9.00
8 8 DMT88 86 6.50 6.50 0.38 0.38 DMF88 94 6.50 9.00
10 3 DMT103 75 4.00 7.50 0.40 0.33
10 4 DMT104 78 4.00 7.50 0.40 0.34 DMF104 89 4.00 11.00
10 6 DMT106 90 5.00 7.50 0.40 0.36 DMF106 107 5.00 11.00
10 8 DMT108 105 6.50 7.50 0.40 0.38 DMF108 115 6.50 11.00 DMT
10 10 DMT1010 120 7.50 7.50 0.40 0.40 DMF1010 130 7.50 11.00
12 3 DMT123 90 4.00 8.75 0.42 0.33
12 4 DMT124 94 4.00 8.75 0.42 0.34 DMF124 115 4.00 12.00
12 6 DMT126 110 5.00 8.75 0.42 0.36 DMF126 120 5.00 12.00
12 8 DMT128 125 6.50 8.75 0.42 0.38 DMF128 146 6.50 12.00
12 10 DMT1210 140 7.50 8.75 0.42 0.40 DMF1210 174 7.50 12.00
12 12 DMT1212 160 8.75 8.75 0.42 0.42 DMF1212 198 8.75 12.00
14 3 DMT143 x 5.50 10.50 0.57 0.33
14 4 DMT144 172 5.50 10.50 0.47 0.34 DMF144 161 5.50 14.00
14 6 DMT146 182 6.50 10.50 0.47 0.36 DMF146 177 6.50 14.00
14 8 DMT148 206 7.50 10.50 0.47 0.38 DMF148 199 7.50 14.00
14 12 DMT1412 234 9.50 10.50 0.47 0.42 DMF1412 276 9.50 14.00
14 14 DMT1414 280 10.50 10.50 0.47 0.47 DMF1414 277 10.50 14.00
16 3 DMT163 x 6.50 11.50 0.50 0.33 DMF
16 6 DMT166 228 6.50 11.50 0.50 0.36 DMF166 213 6.50 15.00
16 8 DMT168 248 7.50 11.50 0.50 0.38 DMF168 260 7.50 15.00
16 10 DMT1610 264 8.50 11.50 0.50 0.40 DMF1610 287 8.50 15.00
16 12 DMT1612 280 9.50 11.50 0.50 0.42 DMF1612 312 9.50 15.00
16 14 DMT1614 316 10.50 11.50 0.50 0.47 DMF1614 360 10.50 15.00
16 16 DMT1616 322 11.50 11.50 0.50 0.50 DMF1616 374 11.50 15.00

Weights in Pounds, Less Accessories / Dimensions in inches

Ductile Iron Class 350 per ANSI/AWWA C153/A21.53
®

SIGMA Corporation www.sigmaco.com 7

® Certified to
® ANSI/NSF 61

Member
 C153 Mechanical Joint Compact Fittings
Tees (continued)
SIZE MJ x MJ MJ x Flange
Run Branch Item No. Wt. H J T T1 Item No. Wt. H L
18 6 DMT186 275 6.50 12.50 0.54 0.36 DMF186 321 6.50 15.50
18 8 DMT188 295 7.50 12.50 0.54 0.38 DMF188 340 7.50 15.50
18 10 DMT1810 315 8.50 12.50 0.54 0.40 DMF1810 x 8.50 15.50
18 12 DMT1812 335 9.50 12.50 0.54 0.42 DMF1812 x 9.50 15.50
18 14 DMT1814 380 10.50 12.50 0.54 0.47 DMF1814 x 10.50 16.50
18 16 DMT1816 405 11.50 12.50 0.54 0.50 DMF1816 440 11.50 16.50
18 18 DMT1818 435 12.50 12.50 0.54 0.54 DMF1818 445 12.50 16.50
20 6 DMT206 315 6.50 14.00 0.57 0.36 DMF206 345 6.50 17.00
20 8 DMT208 345 8.00 14.00 0.57 0.38 DMF208 384 8.00 17.00
20 10 DMT2010 370 9.00 14.00 0.57 0.40 DMF2010 367 9.00 17.00
20 12 DMT2012 395 10.00 14.00 0.57 0.42 DMF2012 402 10.00 17.00
20 14 DMT2014 440 11.00 14.00 0.57 0.47 DMF2014 435 11.00 17.00
20 16 DMT2016 465 12.00 14.00 0.57 0.50 DMF2016 477 12.00 18.00
20 18 DMT2018 505 13.00 14.00 0.57 0.54 DMF2018 507 13.00 18.00
20 20 DMT2020 535 14.00 14.00 0.57 0.57 DMF2020 554 14.00 18.00
24 6 DMT246 415 7.00 16.00 0.61 0.36 DMF246 460 7.00 19.00
24 8 DMT248 445 8.00 16.00 0.61 0.38 DMF248 418 8.00 19.00
24 10 DMT2410 470 9.00 16.00 0.61 0.40 DMF2410 462 9.00 19.00
24 12 DMT2412 500 10.00 16.00 0.61 0.42 DMF2412 502 10.00 19.00
24 14 DMT2414 550 11.00 16.00 0.61 0.47 DMF2414 539 11.00 19.00
24 16 DMT2416 580 12.00 16.00 0.61 0.50 DMF2416 579 12.00 19.00
24 18 DMT2418 625 13.00 16.00 0.61 0.54 DMF2418 634 13.00 22.00 DMT
24 20 DMT2420 660 14.00 16.00 0.61 0.57 DMF2420 686 14.00 22.00
24 24 DMT2424 720 16.00 16.00 0.61 0.61 DMF2424 789 16.00 22.00
30 6 DMT306 700 7.00 20.00 0.66 0.36 DMF306 1000 8.50 23.00
30 8 DMT308 739 8.50 20.00 0.66 0.38 DMF308 x 8.50 23.00
30 10 DMT3010 785 10.00 20.00 0.66 0.40
30 12 DMT3012 830 10.00 20.00 0.66 0.42 DMF3012 x 10.00 23.00
30 16 DMT3016 959 12.50 20.00 0.66 0.50 DMF3016 1035 12.50 23.00
30 18 DMT3018 1085 13.00 20.00 0.66 0.54
30 20 DMT3020 995 15.00 20.00 0.66 0.57 DMF3020 x 15.00 23.00
30 24 DMT3024 1060 16.00 20.00 0.66 0.61 DMF3024 x 16.00 25.00
30 30 DMT3030 1323 20.00 20.00 0.66 0.66 DMF3030 1267 20.00 25.00
36 6 DMT366 1025 8.00 23.50 0.74 0.36
36 8 DMT368 1091 9.00 23.50 0.74 0.38
DMF
36 10 DMT3610 1184 10.00 23.50 0.74 0.40
36 12 DMT3612 1205 10.00 23.50 0.74 0.43 DMF3612 1034 10.00 26.00
36 14 DMT3614 1112 12.50 23.50 0.74 0.47
36 16 DMT3616 1350 12.50 23.50 0.74 0.52
36 18 DMT3618 1155 13.00 23.50 0.74 0.54 DMF3618 1307 16.00 26.00
36 20 DMT3620 1240 15.00 23.50 0.74 0.57
36 24 DMT3624 1498 16.00 23.50 0.74 0.61 DMF3624 1930 16.00 26.00
36 30 DMT3630 1555 20.00 23.50 0.74 0.66 DMF3630 1937 20.00 28.00
36 36 DMT3636 1900 23.50 23.50 0.74 0.74 DMF3636 1924 23.50 28.00
42 6 DMT426 1343 10.00 27.50 0.82 0.36
42 8 DMT428 1347 10.00 27.50 0.82 0.38
42 12 DMT4212 1410 10.00 29.50 0.82 0.43
42 16 DMT4216 1502 12.50 27.50 0.82 0.50
42 18 DMT4218 2000 16.00 27.50 0.82 0.54
42 20 DMT4220 2433 20.00 27.50 0.82 0.57
42 24 DMT4224 2270 20.00 27.50 0.82 0.61 DMF4224 x 20.00 30.00
42 30 DMT4230 2425 22.00 29.50 0.82 0.66 DMF4230 3132 22.00 31.00
42 36 DMT4236 3000 30.00 30.00 0.82 0.74 DMF4236 2765 30.00 31.00
42 42 DMT4242 3175 30.00 30.00 0.82 0.82 DMF4242 x 30.00 31.00

Weights in Pounds, Less Accessories / Dimensions in inches

Ductile Iron Class 350 per ANSI/AWWA C153/A21.53 ®

8 SIGMA Corporation www.sigmaco.com ® Certified to

® ANSI/NSF 61

Member
Tees (continued)

SIZE MJ x MJ MJ x Flange
Run Branch Item No. Wt. H J T T1 Item No. Wt. H L
48 6 DMT486 1685 10.00 32.00 0.90 0.36
42 8 DMT488 1692 10.00 32.00 0.90 0.38
48 12 DMT4812 2030 15.00 32.00 0.90 0.42
48 16 DMT4816 2393 20.00 32.00 0.90 0.50
48 18 DMT4818 2345 16.00 32.00 0.90 0.54
48 20 DMT4820 2500 20.00 32.00 0.90 0.57
48 24 DMT4824 2870 23.00 32.00 0.90 0.61 DMF4824 x 23.00 34.00
48 30 DMT4830 3050 23.00 32.00 0.90 0.66 DMF4830 2762 23.00 34.00
48 36 DMT4836 3900 33.50 32.25 0.90 0.74 DMF4836 3594 33.50 34.00
48 42 DMT4842 4100 33.50 33.50 0.90 0.82 DMF4842 3739 33.50 34.00
48 48 DMT4848 4250 33.50 33.50 0.90 0.90 DMF4848 3878 33.50 34.00

Tapped Tees and Crosses

TEE CROSS
Size T L Tap
Item No. Wt. Item No. Wt.
Item No. Wt. Item No. Wt.
3 DTT3 19 DTC3 19 0.33 6.00 2
4 DTT4 23 DTC4 23 0.34 6.00 2
6 DTT6 37 DTC6 37 0.36 6.00 2
8 DTT8 53 DTC8 53 0.38 6.00 2 DTT
10 DTT10 68 DTC10 68 0.40 6.00 2
12 DTT12 88 DTC12 88 0.42 6.00 2
14 DTT14 118 DTC14 119 0.47 8.00 2
16 DTT16 164 DTC16 202 0.50 8.00 2
18 DTT18 205 DTC18 206 0.54 8.00 2
20 DTT20 259 DTC20 259 0.57 8.00 2
24 DTT24 320 DTC24 320 0.61 8.00 2

Caps and Plugs DTC

CAP CAP PLUG PLUG
Size SOLID TAPPED Wt. SOLID TAPPED Wt.
Item No. Item No. Item No. Item No.
2 DMK2 10
3 DMK3 DTK3 8 DMP3 DTP3 8
4 DMK4 DTK4 9 DMP4 DTP4 10
6 DMK6 DTK6 15 DMP6 DTP6 16
8 DMK8 DTK8 22 DMP8 DTP8 26
10 DMKI0 DTK10 32 DMP10 DTP10 36
12 DMK12 DTK12 42 DMP12 DTP12 46
14 DMK14 DTK14 66 DMP14 DTP14 75
16 DMK16 DTK16 92 DMP16 DTP16 95
18 DMK18 DTK18 114 DMP18 DTP18 121
20 DMK20 DTK20 125 DMP20 DTP20 135
24 DMK24 DTK24 166 DMP24 DTP24 175
30 DMK30 DTK30 345 DMP30 DTP30 355
36 DMK36 DTK36 628 DMP36 DTP36 688
42 DMK42 DTK42 665 DMP42 DTP42 815
48 DMK48 DTK48 901 DMP48 DTP48 1085

Weights in Pounds, Less Accessories / Dimensions in inches

®
Ductile Iron Class 350 per ANSI/AWWA C153/A21.53

® Certified to
SIGMA Corporation www.sigmaco.com 9
® ANSI/NSF 61

Member
 C153 Mechanical Joint Compact Fittings
Wyes (45 degree laterals)
Size Wt
Item No. X Y P T T1
Run Branch lb
3 3 DMY33 2.00 8.50 8.50 0.33 0.33 36
4 2 DMY42 2.00 8.50 8.50 0.34 0.30 39
4 3 DMY43 2.50 9.50 9.50 0.34 0.33 37
4 4 DMY44 2.50 9.50 9.50 0.34 0.34 45
6 4 DMY64 1.50 11.00 11.00 0.36 0.34 67
6 6 DMY66 3.00 13.00 13.00 0.36 0.36 93
8 3 DMY83 2.50 13.00 13.00 0.38 0.33 x
8 4 DMY84 0.50 13.00 13.00 0.38 0.34 93
8 6 DMY86 2.00 14.50 14.50 0.38 0.36 113
8 8 DMY88 3.50 16.00 16.00 0.38 0.38 136
10 3 DMY103 2.50 15.00 15.00 0.40 0.33 x
10 4 DMY104 0.00 15.00 15.00 0.40 0.34 118
10 6 DMY106 1.00 16.00 16.00 0.40 0.36 136
10 8 DMY108 2.50 17.00 17.00 0.40 0.38 170
10 10 DMY1010 3.50 19.00 19.00 0.40 0.40 199
12 3 DMY123 2.50 16.50 16.50 0.42 0.33 x
12 4 DMY124 0.00 16.50 16.50 0.42 0.34 150
12 6 DMY126 1.50 18.50 18.50 0.42 0.36 186
12 8 DMY128 1.50 18.50 18.50 0.42 0.38 188
12 10 DMY1210 3.00 20.00 20.00 0.42 0.40 223
12 12 DMY1212 4.50 22.50 22.50 0.42 0.42 272
14 6 DMY146 0.00 19.00 21.50 0.47 0.36 x
14 8 DMY148 1.50 20.00 22.50 0.47 0.38 230
14 10 DMY1410 4.00 25.00 25.00 0.47 0.40 508
14 12 DMY1412 5.00 25.00 25.00 0.47 0.42 x
14 14 DMY1414 6.00 25.00 25.00 0.47 0.47 465
16 6 DMY166 0.00 21.50 24.00 0.50 0.36 298
16 8 DMY168 1.50 23.00 25.00 0.50 0.38 320
16 10 DMY1610 6.50 28.00 28.00 0.50 0.40 463
16 12 DMY1612 6.50 28.00 28.00 0.50 0.42 503 DMY
16 14 DMY1614 6.50 28.00 28.00 0.50 0.47 x
16 16 DMY1616 6.50 28.00 28.00 0.50 0.50 545
18 4 DMY184 3.50 23.00 25.50 0.54 0.34 402
18 6 DMY186 0.00 23.00 25.50 0.54 0.36 348
18 8 DMY188 1.50 25.00 27.50 0.54 0.38 380
18 10 DMY1810 4.50 30.00 30.00 0.54 0.40 504
18 12 DMY1812 4.50 30.00 30.00 0.54 0.42 479
18 14 DMY1814 4.50 30.00 30.00 0.54 0.47 479
18 16 DMY1816 4.50 30.00 30.00 0.54 0.50 x
18 18 DMY1818 6.50 30.00 30.00 0.54 0.54 500
20 6 DMY206 0.00 25.00 27.50 0.57 0.36 x
20 8 DMY208 1.50 25.00 27.50 0.57 0.38 500
20 10 DMY2010 3.00 28.00 30.00 0.57 0.40 x
20 12 DMY2012 6.50 32.00 32.00 0.57 0.42 588
20 14 DMY2014 6.50 32.00 32.00 0.57 0.47 x
20 16 DMY2016 6.50 32.00 32.00 0.57 0.50 x
20 18 DMY2018 6.50 32.00 32.00 0.57 0.54 x
20 20 DMY2020 8.00 33.00 33.00 0.57 0.57 747
24 6 DMY246 0.00 29.50 32.50 0.61 0.36 x
24 8 DMY248 0.00 29.50 32.50 0.61 0.38 x
24 10 DMY2410 1.50 32.00 34.50 0.61 0.40 x
24 12 DMY2412 3.00 32.00 34.50 0.61 0.42 x
24 14 DMY2414 4.50 33.00 34.50 0.61 0.47 x
24 16 DMY2416 5.50 35.00 35.00 0.61 0.50 2010
24 18 DMY2418 7.00 36.00 36.00 0.61 0.54 x
24 20 DMY2420 9.00 38.50 38.50 0.61 0.57 x
24 24 DMY2424 9.00 38.50 38.50 0.61 0.61 1061

Weights in Pounds, Less Accessories / Dimensions in inches

Ductile Iron Class 350 per ANSI/AWWA C153/A21.53
®

10 SIGMA Corporation www.sigmaco.com ®

® Certified to
ANSI/NSF 61

Member
Wyes (45 degree laterals)
Size Wt
Item No. X Y P T T1
Run Branch lb
30 4 DMY304 2.00 30.00 35.00 0.66 0.34 x
30 6 DMY306 4.00 45.00 50.00 0.66 0.36 x
30 8 DMY308 4.00 40.00 40.00 0.66 0.38 x
30 12 DMY3012 5.00 40.00 44.00 0.66 0.42 x
30 14 DMY3014 7.00 42.00 44.00 0.66 0.47 x
30 16 DMY3016 7.00 44.00 44.00 0.66 0.50 x
30 18 DMY3018 8.00 46.00 46.00 0.66 0.54 x
30 20 DMY3020 10.00 47.00 47.00 0.66 0.57 1531
30 24 DMY3024 10.00 47.00 47.00 0.66 0.61 x
30 30 DMY3030 10.00 50.00 50.00 0.66 0.66 2200
36 10 DMY3610 5.00 42.50 46.00 0.74 0.40 1601
36 12 DMY3612 5.00 42.50 46.00 0.74 0.42 x
36 14 DMY3614 5.00 42.50 46.00 0.74 0.47 x
36 16 DMY3616 5.00 42.50 46.00 0.74 0.50 x
36 18 DMY3618 8.00 45.00 48.00 0.74 0.54 x
36 20 DMY3620 10.00 48.50 50.00 0.74 0.57 x
36 24 DMY3624 12.50 52.00 52.00 0.74 0.61 x
36 30 DMY3630 15.00 54.00 54.00 0.74 0.66 x
36 36 DMY3636 15.00 57.50 57.50 0.74 0.74 4754
42 8 DMY428 0.00 48.00 56.00 0.82 0.38 x
42 20 DMY4220 8.00 58.00 58.00 0.82 0.57 x
42 24 DMY4224 10.00 58.00 58.00 0.82 0.61 x
DMY
42 30 DMY4230 12.00 60.00 60.00 0.82 0.66 x
42 36 DMY4236 12.00 64.00 64.00 0.82 0.74 x
42 42 DMY4242 15.00 68.00 68.00 0.82 0.82 4048
48 6 DMY486 0.00 50.00 58.00 0.90 0.36 x
48 8 DMY486 0.00 50.00 58.00 0.90 0.38 x
48 16 DMY4816 0.00 52.00 58.00 0.90 0.50 x
48 20 DMY4820 0.00 52.00 58.00 0.90 0.57 x
48 24 DMY4824 5.00 56.00 62.00 0.90 0.61 x
48 30 DMY4830 4.00 57.00 62.00 0.90 0.66 3433
48 36 DMY4836 5.00 62.00 66.00 0.90 0.74 x
48 42 DMY4842 12.00 75.00 75.00 0.90 0.82 x
48 48 DMY4848 16.00 75.00 75.00 0.90 0.90 x

Weights in Pounds, Less Accessories / Dimensions in inches

® Ductile Iron Class 350 per ANSI/AWWA C153/A21.53
® Certified to
SIGMA Corporation www.sigmaco.com 11
® ANSI/NSF 61

Member
 C153 Mechanical Joint Compact Fittings
2

DMR SPR LPR PPR

Reducers
MJ x MJ PE x MJ (Small End MJ) MJ X PE (Large End MJ) PE x PE
Size
Item No. Wt. L Item No. Wt. L1 Item No. Wt. L2 Item No. Wt. L3 T T1
3x2 DMR32 14 2.50 0.33 0.30
4x2 DMR42 16 2.50 SPR42 14 8.00 0.34 0.30
4x3 DMR43 18 3.00 SPR43 17 8.50 LPR43 18 8.50 PPR43 14 14.00 0.34 0.33
6x3 DMR63 22 5.00 SPR63 24 10.50 LPR63 19 10.50 PPR63 19 16.00 0.36 0.33
6x4 DMR64 24 4.00 SPR64 25 9.50 LPR64 25 9.50 PPR64 22 15.00 0.36 0.34
8x3 DMR83 30 5.00 0.38 0.33
8x4 DMR84 32 5.00 SPR84 30 10.50 LPR84 34 10.50 PPR84 30 16.00 0.38 0.34
8x6 DMR86 36 4.00 SPR86 35 9.50 LPR86 32 9.50 PPR86 30 15.00 0.38 0.36
10 x 4 DMR104 46 7.00 SPR104 43 12.50 LPR104 43 12.50 PPR104 46 18.00 0.40 0.34
10 x 6 DMR106 47 5.00 SPR106 46 10.50 LPR106 42 10.50 PPR106 46 16.00 0.40 0.36
10 x 8 DMR108 50 4.00 SPR108 42 9.50 LPR108 50 9.50 PPR108 47 15.00 0.40 0.38
12 x 4 DMR124 58 9.00 SPR124 60 14.50 LPR124 60 14.50 PPR124 58 20.00 0.42 0.34
12 x 6 DMR126 58 7.00 SPR126 58 12.50 LPR126 58 12.50 PPR126 57 18.00 0.42 0.36
12 x 8 DMR128 57 5.00 SPR128 54 10.50 LPR128 55 10.50 PPR128 54 16.00 0.42 0.38
12 x10 DMR1210 61 4.00 SPR1210 59 9.50 LPR1210 59 9.50 PPR1210 54 15.00 0.42 0.40
14 x 6 DMR146 100 9.00 SPR146 100 16.90 LPR146 104 14.50 PPR146 93 22.30 0.47 0.36
14 x 8 DMR148 100 7.00 SPR148 98 14.90 LPR148 98 12.40 PPR148 94 20.30 0.47 0.38
14 x 10 DMR1410 100 5.00 SPR1410 94 12.90 LPR1410 92 10.40 PPR1410 90 18.30 0.47 0.40
14 x 12 DMR1412 100 4.00 SPR1412 90 11.90 LPR1412 92 9.40 PPR1412 88 17.30 0.47 0.42
16 x 6 DMR166 124 11.00 SPR166 125 18.90 LPR166 136 16.50 PPR166 93 24.30 0.50 0.36
16 x 8 DMR168 124 9.00 SPR168 121 16.90 LPR168 128 14.40 PPR168 119 22.30 0.50 0.38
16 x 10 DMR1610 124 7.00 SPR1610 105 15.00 LPR1610 123 12.50 PPR1610 119 20.50 0.50 0.40
16 x 12 DMR1612 112 5.00 SPR1612 109 12.90 LPR1612 108 10.50 PPR1612 99 18.30 0.50 0.42
16 x 14 DMR1614 140 4.00 SPR1614 126 12.00 LPR1614 132 12.00 PPR1614 129 19.70 0.50 0.47
18 x 4 DMR184 170 11.00 0.54 0.34
18 x 6 DMR186 194 13.00 0.54 0.36
18 x 8 DMR188 190 13.00 SPR188 170 20.00 LPR188 195 19.50 PPR188 170 27.40 0.54 0.38
18 x 10 DMR1810 195 10.00 SPR1810 165 18.00 LPR1810 185 17.40 PPR1810 160 25.50 0.54 0.40
18 x 12 DMR1812 180 7.00 SPR1812 150 15.50 LPR1812 175 14.00 PPR1812 150 19.50 0.54 0.42
18 x 14 DMR1814 190 6.00 5PR1814 175 15.00 LPR1814 190 15.00 PPR1814 160 23.00 0.54 0.47
18 x 16 DMR1816 195 5.00 SPR1816 170 12.50 LPR1816 190 12.50 PPR1816 145 18.00 0.54 0.50
20 x 6 DMR206 232 16.00 SPR206 201 22.00 LPR206 231 19.00 PPR206 106 27.50 0.57 0.36
20 x 8 DMR208 227 16.00 SPR208 198 27.00 LPR208 227 19.00 PPR208 106 27.50 0.57 0.38
20 x 10 DMR2010 220 14.00 SPR2010 200 22.00 LPR2010 210 19.00 PPR2010 180 27.50 0.57 0.40
20 x 12 DMR2012 205 12.00 SPR2012 170 17.50 LPR2012 205 16.00 PPR2012 190 21.50 0.57 0.42
20 x 14 DMR2014 200 10.00 SPR2014 190 18.00 LPR2014 205 17.90 PPR2014 195 26.00 0.57 0.47
20 x 16 DMR2016 200 7.00 SPR2016 185 13.50 LPR2016 200 13.50 PPR2016 170 19.00 0.57 0.50
20 x 18 DMR2018 225 4.00 SPR2018 200 12.00 LPR2018 215 12.00 PPR2018 190 20.00 0.57 0.54

Weights in Pounds, Less Accessories / Dimensions in inches

Ductile Iron Class 350 per ANSI/AWWA C153/A21.53 ®

12 SIGMA Corporation www.sigmaco.com

® Certified to
® ANSI/NSF 61

Member
 2

DMR SPR LPR PPR

Reducers (continued)
MJ x MJ PE x MJ (Small End MJ) MJ X PE (Large End MJ) PE x PE
Size
Item No. Wt. L Item No. Wt. L1 Item No. Wt. L2 Item No. Wt. L3 T T1
24 x 6 DMR246 322 16.00 SPR246 284 21.50 LPR246 320 21.00 PPR246 283 22.50 0.61 0.36
24 x 8 DMR248 318 16.00 SPR248 282 21.50 LPR248 316 21.00 PPR248 281 22.50 0.61 0.38
24 x 10 DMR2410 312 16.00 SPR2410 276 21.50 LPR2410 310 21.00 PPR2410 274 22.50 0.61 0.40
24 x 12 DMR2412 305 16.00 SPR2412 275 21.50 LPR2412 290 21.00 PPR2412 240 22.50 0.61 0.42
24 x 14 DMR2414 310 14.00 SPR2414 310 22.00 LPR2414 315 21.90 PPR2414 295 25.00 0.61 0.47
24 x 16 DMR2416 320 12.00 SPR2416 285 17.50 LPR2416 285 17.50 PPR2416 285 23.00 0.61 0.50
24 x 18 DMR2418 305 10.00 SPR2418 300 18.00 LPR2418 310 18.00 PPR2418 290 21.00 0.61 0.54
24 x 20 DMR2420 300 7.00 SPR2420 270 13.50 LPR2420 275 13.50 PPR2420 240 19.00 0.61 0.57
30 x 12 DMR3012 499 30.00 0.66 0.42
30 x 16 DMR3016 633 30.00 SPR3016 565 39.00 LPR3016 623 39.00 PPR3016 555 48.00 0.66 0.50
30 x 18 DMR3018 658 28.00 SPR3018 590 37.00 LPR3018 635 37.00 PPR3018 567 46.00 0.66 0.54
30 x 20 DMR3020 628 24.00 SPR3020 560 33.00 LPR3020 603 33.00 PPR3020 535 42.00 0.60 0.57
30 x 24 DMR3024 478 10.00 SPR3024 495 24.50 LPR3024 526 24.50 PPR3024 458 33.50 0.66 0.61
36 x 12 DMR3612 678 30.00 0.74 0.42
36 x 16 DMR3616 1078 30.00 0.74 0.50
36 x 18 DMR3618 876 36.00 0.74 0.54
36 x 20 DMR3620 975 36.00 SPR3620 874 45.00 LPR3620 950 45.00 PPR3620 849 54.00 0.74 0.57
36 x 24 DMR3624 770 19.00 SPR3624 746 33.00 LPR3624 810 33.00 PPR3624 709 42.00 0.74 0.61
36 x 30 DMR3630 650 15.50 SPR3630 725 24.50 LPR3630 2758 24.50 PPR3630 657 33.50 0.74 0.66
42 x 20 DMR4220 1208 40.00 0.82 0.57
42 x 24 DMR4224 1356 40.00 SPR4224 1204 49.00 LPR4224 1319 49.00 PPR4224 1167 58.00 0.82 0.61
42 x 30 DMR4230 1083 20.00 SPR4230 931 29.00 LPR4230 1015 29.00 PPR4230 863 38.00 0.82 0.66
42 x 36 DMR4236 1114 15.50 SPR4236 962 24.50 LPR4236 1013 24.50 PPR4236 861 33.50 0.82 0.74
48 x 20 DMR4820 1462 40.00 0.90 0.57
48 x 24 DMR4824 1700 40.00 0.90 0.61
48 x 30 DMR4830 1779 40.00 SPR4830 1594 49.00 LPR4830 1711 49.00 PPR4830 1526 58.00 0.90 0.66
48 x 36 DMR4836 1641 28.00 SPR4836 1456 37.00 LPR4836 1540 37.00 PPR4836 1355 46.00 0.90 0.74
48 x 42 DMR4842 1426 15.50 SPR4842 1241 24.50 LPR4842 1274 24.50 PPR4842 1089 33.50 0.90 0.82

Weights in Pounds, Less Accessories / Dimensions in inches

Ductile Iron Class 350 per ANSI/AWWA C153/A21.53
®

SIGMA Corporation www.sigmaco.com 13

® Certified to
® ANSI/NSF 61

Member
 C153 Mechanical Joint Compact Fittings
Tees: MJ x Swivel (Hydrant Tees)
Size Item No. H S T T1 Wt
6x4 DMH64 4.00 10.00 0.36 0.34 x
6x6 DMH66 5.00 10.00 0.36 0.36 77
8x6 DMH86 5.00 11.00 0.38 0.36 89
8x8 DMH88 6.50 11.00 0.38 0.38 116
10 x 4 DMH104 4.00 12.50 0.40 0.34 95
10 x 6 DMH106 5.00 12.50 0.40 0.36 113
10 x 8 DMH108 6.50 12.50 0.40 0.38 129
12 x 4 DMH124 4.00 13.50 0.42 0.34 x
12 x 6 DMH126 5.00 13.50 0.42 0.36 128
12 x 8 DMH128 6.50 13.50 0.42 0.38 149
12 x 12 DMH1212 8.75 13.50 0.42 0.42 x
14 x 6 DMH146 6.50 15.00 0.47 0.36 211
14 x 8 DMH148 7.50 15.00 0.47 0.38 182 DMH
16 x 6 DMH166 6.50 16.00 0.50 0.36 248
16 x 8 DMH168 7.50 16.00 0.50 0.38 298
Swivel x Solid Adapter
18 x 6 DMH186 6.50 17.00 0.54 0.36 300 Size Item No. L T Wt.
18 x 8 DMH188 7.50 17.00 0.54 0.38 272 4 SSA413 13.00 0.34 29
20 x 6 DMH206 6.50 18.50 0.57 0.36 358 6 SSA613 13.00 0.36 47
20 x 8 DMH208 8.00 18.50 0.57 0.38 382 6 SSA618 18.00 0.36 58
24 x 6 DMH246 7.00 19.00 0.61 0.36 458 6 SSA624 24.00 0.36 69
24 x 8 DMH248 8.00 19.00 0.61 0.38 477 6 SSA630 30.00 0.36 66
30 x 6 DMH306 7.50 24.50 0.66 0.36 662 6 SSA636 36.00 0.36 75
36 x 6 DMH366 8.00 27.50 0.74 0.36 891 6 SSA648 48.00 0.36 94
36 x 8 DMH368 9.00 27.50 0.74 0.38 936 6 SSA660 60.00 0.36 112
6 SSA672 72.00 0.36 131
8 SSA813 13.00 0.38 52
10 SSA1013 13.00 0.40 69
Swivel Gland 12 SSA1213 13.00 0.42 87
Size Item No. Wt.
4 HR4 8
6 HR6 18
Dual Purpose Sleeves
8 HR8 15 Item
10 HR10 18 L1 T Wt.
No.
12 HR12 24 DDL4 32 12 0.52
DDL6 50 12 0.55
DDL8 65 12 0.60
HR DDL10 89 12 0.63
DDL12 104 12 0.68
DDL12 104 12 0.42
Swivel x Solid 90 Degree Bend
DDL
Size Item No. A B T Wt.
3 SSB3 8.50 13.00 x
4 SSB4 9.50 14.00 52
6 SSB6 10.50 16.00 74
8 SSB8 12.50 18.00 102
10 SSB10 13.00 20.00 x
12 SSB12 14.50 22.00 x
14 SSB14 19.50 24.00 x
16 SSB16 20.50 26.00 x
18 SSB18 21.00 28.00 x
20 SSB20 22.50 30.00 x
24 SSB24 25.00 34.00 x
30 SSB30 30.50 40.00 x
36 SSB36 33.50 46.00 x
42 SSB42 38.25 52.00 x SSB
48 SSB48 42.25 58.00 x

Weights in Pounds, Less Accessories / Dimensions in inches

Ductile Iron Class 350 per ANSI/AWWA C153/A21.53 ®

14 SIGMA Corporation www.sigmaco.com ® Certified to

® ANSI/NSF 61

Member
Offsets
MJ x MJ MJ x PE
Item No. Wt. D L L1 T Wt.
Size Item No.
3x6 DMO36 30 6.00 9.00 14.50 0.33 DMQ36 29
3 x 12 DMO312 40 12.00 15.00 20.50 0.33 DMQ312 39
3 x 18 DMO318 49 18.00 21.00 26.50 0.33 DMQ318 48
3 x 24 DMO324 55 24.00 27.00 33.50 0.33 DMQ324 53
4x6 DMO46 45 6.00 10.00 15.50 0.34 DMQ46 44
4 x 12 DMO412 55 12.00 16.00 21.50 0.34 DMQ412 54
4 x 18 DMO418 65 18.00 22.00 27.50 0.34 DMQ418 63
4 x 24 DMO424 75 24.00 28.00 33.50 0.34 DMQ424 72
6x6 DMO66 41 6.00 12.00 17.50 0.36 DMQ66 54
6 x 12 DMO612 65 12.00 18.00 23.50 0.36 DMQ612 64
6 x 18 DMO618 75 18.00 24.00 29.50 0.36 DMQ618 72 DMO
6 x 24 DMO624 85 24.00 30.00 35.50 0.36 DMQ624 82
8x6 DMO86 84 6.00 13.00 18.50 0.38 DMQ86 78
8 x 12 DMO812 90 12.00 19.00 24.50 0.38 DMQ812 88
8 x 18 DMO818 100 18.00 25.00 30.50 0.38 DMQ818 96
8 x 24 DMO824 110 24.00 24.00 0.38
10 x 6 DMO106 105 6.00 15.00 20.50 0.40 DMQ106 102
10 x 12 135 12.00 21.00 26.50 0.40 DMQ1012 132
10 x 18 165 18.00 27.00 32.50 0.40 DMQ1018 160
12 x 6 DMO126 124 6.00 17.00 22.50 0.42 DMQ126 112
12 x 12 153 12.00 23.00 28.50 0.42 DMQ1212 146
12 x 18 190 18.00 29.00 34.50 0.42 DMQ1218 184
12 x 24 202 24.00 35.00 40.50 0.42 DMQ1224 194
12 x 30 213 30.00 41.00 46.50 0.42 DMQ1230 205
DMQ
Sleeves
SHORT LONG
Size SLEEVE Wt. L SLEEVE Wt. L1 T
Item No. Item No.
3 DMS3 13 7.50 DML3 18 12.00 0.33
4 DMS4 17 7.50 DML4 20 12.00 0.34
6 DMS6 28 7.50 DML6 33 12.00 0.36
8 DMS8 38 7.50 DML8 46 12.00 0.38
10 DMS10 49 7.50 DML10 62 12.00 0.40
12 DMS12 56 7.50 DML12 76 12.00 0.42 DML
14 DMS14 111 9.50 DML14 140 15.00 0.47
16 DMS16 123 9.50 DML16 170 15.00 0.50
18 DMS18 160 9.00 DML18 200 15.00 0.54
20 DMS20 195 9.00 DML20 255 15.00 0.57
24 DMS24 225 9.00 DML24 335 15.00 0.61
30 DMS30 423 15.00 DML30 640 24.00 0.66
36 DMS36 591 15.00 DML36 925 24.00 0.74
42 DMS42 788 15.00 DML42 1390 24.00 0.82
48 DMS48 978 15.00 DML48 1740 24.00 0.90
DMS
Dual Cutting-In Sleeves
Size Item No. Wt. T T1 A L1
3 DCL3 34 0.33 0.35 3.96 20
4 DCL4 50 0.34 0.37 4.80 20
6 DCL6 62 0.36 0.39 6.90 20
8 DCL8 90 0.38 0.41 9.05 20
10 DCL10 105 0.40 0.43 11.10 20
12 DCL12 128 0.42 0.45 13.20 20

DCL

Weights in Pounds, Less Accessories / Dimensions in inches

Ductile Iron Class 350 per ANSI/AWWA C153/A21.53
®

SIGMA Corporation www.sigmaco.com 15

® Certified to
® ANSI/NSF 61

Member
 C153 Mechanical Joint Compact Fittings

Mechanical Joint Accessories

Gasket/Bolt Packs
Size (in.) Item No. Wt. (lb.)
3 MGP3 3
MJ Glands MJ Gaskets 4 MGP4 4
Size Item No. Wt. Size Item Wt. Item Wt. 6 MGP6 6
2 DG2 2 No. No. 8 MGP8 7
3 DG3 4 2 MG2 10 MGP10 8
4 DG4 5 3 MG3 0.25 TG3 0.50 12 MGP12 9
6 DG6 6 4 MG4 0.30 TG4 0.60
8 DG8 7 6 MG6 0.50 TG6 0.75
10 DG10 10 8 MG8 0.75 TG8 1.10
12 DG12 15 10 MG10 0.80 TG10 1.30
14 DG14 23 12 MG12 1.00 TG12 1.65 MJ Gland Packs
16 DG16 28 14 MG14 1.30 Size (in.) Item No. Wt. (lb.)
18 DG18 30 16 MG16 1.45 2 DGP2 6
20 DG20 43 18 MG18 1.60 3 DGP3 7
24 DG24 50 20 MG20 1.90
4 DGP4 8
30 DG30 85 24 MG24 2.10
6 DGP6 12
36 DG36 115 30 MG30 2.30
8 DGP8 15
42 DG42 180 36 MG36 2.75
10 DGP10 20
48 DG48 275 42 MG42 3.20
12 DGP12 25
48 MG48 3.65
14 DGP14 37
Low Alloy, Corrosion Resistant Steel T-Head Bolts 16 DGP16 43
18 DGP18 47
Standard Bolts Anti-Rotation Bolts
20 DGP20 61
Size (in.) Item No. Wt. (lb.) Size (in.) Item No. Wt. (lb.) 24 DGP24 72
3 MGP3 3 3 MGP3 3
4 MGP4 4 4 MGP4 4
6 MGP6 6 Includes: Gland, MJ Gasket, and
6 MGP6 6
8 MGP8 7 Standard Tee Bolts & Nuts
8 MGP8 7
10 MGP10 8 10 MGP10 8
12 MGP12 9 12 MGP12 9

MJ Retainer Glands
Pipe Item No. Wt. IRON PIPE Rating Qty Size Torque
Size O.D (psi) (ft-lbs)
3 RMG3 5 3.96 350 4 5/8 X 2 85
4 RMG4 7 4.80 350 4 5/8 X 2 85
6 RMG6 12 6.90 350 6 5/8 X 2 85
8 RMG8 16 9.05 250 9 5/8 X 2 85
10 RMG10 22 11.10 250 16 5/8 X 2 85
12 RMG12 28 13.20 250 16 5/8 X 2 85
14 RMG14 45 15.30 250 20 5/8 X 2 85 Retainer Packs
16 RMG16 52 17.40 250 24 5/8 X 2 85 Size Item No. Wt.
18 RMG18 62 19.50 200 24 5/8 X 2 85 3 RGP3 9
20 RMG20 75 21.60 200 28 3/4 X 110 4 RGP4 10
24 RMG24 97 25.80 200 32 3 3/4 X 110 6 RGP6 15
30 RMG30 196 32.00 100 40 3 3/4 X 3 110 8 RGP8 19
36 RMG36 246 38.30 100 48 3/4 X 2-1/2 110 10 RGP10 25
42 RMG42 302 44.50 100 56 3/4 X 2-1/2 110 12 RGP12 32
48 RMG48 380 50.80 100 64 3/4 X 2-1/2 110
Weights in Pounds, Less Accessories / Dimensions in inches
Ductile Iron Class 350 per ANSI/AWWA C153/A21.53 ®

16 SIGMA Corporation www.sigmaco.com

® Certified to
® ANSI/NSF 61

Member
C153 MJ Non-Standard Items:

Item # Description Item # Description

DCL16 C153 DI 16” X 16” MJ X MJ CUT-IN SLEEVE DMF2418 C153 DI 24” X 18” MJ X FLG TEE
DMB1612 C153 DI 16” X 12” MJ X MJ REDUCING BEND DMF2424 C153 DI 24” X 24” MJ X FLG TEE
DMB1830 C153 DI 18” X 30” MJ X MJ 30 DEGREE BEND DMF246 C153 DI 24” X 6” MJ X FLG TEE
DMB211 C153 DI 2” MJ x MJ 11-1/4 DEGREE BEND DMF248 C153 DI 24” X 8” MJ X FLG TEE
DMB222 C153 DI 2” MJ x MJ 22-1/2 DEGREE BEND DMF306 C153 DI 30” X 6” MJ X FLG TEE
DMB2405 C153 DI 24” X 24” MJ X MJ 5-5/8 DEGREE BEND DMF3630 C153 DI 36” X 30” MJ X FLG TEE
DMB3005 C153 DI 30” X 30” MJ X MJ 5-5/8 DEGREE BEND DMF43 C153 DI 4” X 3” MJ X FLG TEE
DMB3605 C153 DI 36” x 36” MJ X MJ 5-5/8 DEGREE BEND DMH306 C153 DI 30” X 6” MJ X SWL TEE
DMB4205 C153 DI 42” X 42” MJ X MJ 5-5/8 DEGREE BEND DMH366 C153 DI 36” X 6” MJ X SWL TEE
DMB4260 C153 DI MJ 42X60 BEND DMK2 C153 DI 2” MJ CAP
DMB4805 C153 DI 48” X 48” MJ X MJ 5-5/8 DEGREE BEND DML2 C153 DI 2” X 2” MJ X MJ LONG SLEEVE
DMB4830 C153 DI 48” X 30” MJ X MJ 30 DEGREE BEND DMR32 C153 DI 3” X 2” MJ X MJ CONCENTRIC REDUCER
DMC1614 C153 DI 16” X 14” MJ X MJ CROSS DMR4220 C153 DI 42” X 20” MJ X MJ CONCENTRIC REDUCER
DMC186 C153 DI 18” X 6” MJ X MJ CROSS DMR4820 C153 DI 48” X 20” MJ X MJ CONCENTRIC REDUCER
DMC2010 C153 DI 20” X 10” MJ X MJ CROSS DMR83 C153 DI 8” X 3” MJ X MJ CONCENTRIC REDUCER
DMC206 C153 DI 20” X 6” MJ X MJ CROSS DMT3010 C153 DI 30” X 10” MJ X MJ TEE
DMC3012 C153 DI 30” X 12” MJ X MJ CROSS DMT304 C153 DI 30” X 4” MJ X MJ TEE
DMC3016 C153 DI 30” X 16” MJ X MJ CROSS DMT3610 C153 DI 36” X 10” MJ X MJ TEE
DMC306 C153 DI 30” X 6” MJ X MJ CROSS DMT4220 C153 DI 42” X 20” MJ X MJ TEE
DMC308 C153 DI 30” X 8” MJ X MJ CROSS DMT428 C153 DI 42” X 8” MJ X MJ TEE
DMC4212 C153 DI 42” X 12” MJ X MJ CROSS DMT62 C153 DI 6” X 2” MJ X MJ TEE
DMC4216 C153 DI 42” X 16” MJ X MJ CROSS DMY1410 C153 DI 14” X 10” MJ X MJ WYE
DMC4812 C153 DI 48” X 12” MJ X MJ CROSS DMY1414 C153 DI 14” X 14” MJ X MJ WYE
DMC4816 C153 DI 48” X 16” MJ X MJ CROSS DMY148 C153 DI 14” X 8” MJ X MJ WYE
DMF103 C153 DI 10” X 3” MJ X FLG TEE DMY1610 C153 DI 16” X 10” MJ X MJ WYE
DMF1210 C153 DI 12” X 10” MJ X FLG TEE DMY1612 C153 DI 16” X 12” MJ X MJ WYE
DMF1212 C153 DI 12” X 12” MJ X FLG TEE DMY1616 C153 DI 16” X 16” MJ X MJ WYE
DMF1412 C153 DI 14” X 12” MJ X FLG TEE DMY168 C153 DI 16” X 8” MJ X MJ WYE
DMF1414 C153 DI 14” X 14” MJ X FLG TEE DMY1810 C153 DI 18” X 10” MJ X MJ WYE
DMF146 C153 DI 14” X 6” MJ X FLG TEE DMY1812 C153 DI 18” X 12” MJ X MJ WYE
DMF1610 C153 DI 16” X 10” MJ X FLG TEE DMY1818 C153 DI 18” X 18” MJ X MJ WYE
DMF1612 C153 DI 16” X 12” MJ X FLG TEE DMY184 C153 DI 18” X 4” MJ X MJ WYE
DMF1614 C153 DI 16” X 14” MJ X FLG TEE DMY186 C153 DI 18” X 6” MJ X MJ WYE
DMF166 C153 DI 16” X 6” MJ X FLG TEE DMY188 C153 DI 18” X 8” MJ X MJ WYE
DMF168 C153 DI 16” X 8” MJ X FLG TEE DMY2020 C153 DI 20” X 20” MJ X MJ WYE
DMF186 C153 DI 18” X 6” MJ X FLG TEE DMY208 C153 DI 20” X 8” MJ X MJ WYE
DMF188 C153 DI 18” X 8” MJ X FLG TEE DMY2416 C153 DI 24” X 16” MJ X MJ WYE
DMF208 C153 DI 20” X 8” MJ X FLG TEE DMY2424 C153 DI 24” X 24” MJ X MJ WYE
DMF2410 C153 DI 24” X 10” MJ X FLG TEE DMY3024 C153 DI 30” X 24” MJ X MJ WYE
DMF2412 C153 DI 24” X 12” MJ X FLG TEE DMY3030 C153 DI 30” X 30” MJ X MJ WYE
DMF2416 C153 DI 24” X 16” MJ X FLG TEE DMY3636 C153 DI MJ 36X36 WYE
DMF2418 C153 DI 24” X 18” MJ X FLG TEE
DMF2424 C153 DI 24” X 24” MJ X FLG TEE
DMF246 C153 DI 24” X 6” MJ X FLG TEE
DMF248 C153 DI 24” X 8” MJ X FLG TEE
DMF306 C153 DI 30” X 6” MJ X FLG TEE
DMF3630 C153 DI 36” X 30” MJ X FLG TEE
DMF43 C153 DI 4” X 3” MJ X FLG TEE
DMH306 C153 DI 30” X 6” MJ X SWL TEE
DMH366 C153 DI 36” X 6” MJ X SWL TEE
DMK2 C153 DI 2” MJ CAP
DML2 C153 DI 2” X 2” MJ X MJ LONG SLEEVE
DMR32 C153 DI 3” X 2” MJ X MJ CONCENTRIC REDUCER

Weights in Pounds, Less Accessories / Dimensions in inches

Ductile Iron Class 350 per ANSI/AWWA C153/A21.53
SIGMA Corporation www.sigmaco.com 17
®

® Certified to
® ANSI/NSF 61

Member