Order No.

ITD1411903GE

2014 - LCD TV Model No. LCD-201411

(mainly AX900) AVC-201411

Ver. 1.0

This document shows mainly the difference from previous Full-HD, AX800 models.
Refer to the Technical Guide of those model “ITD1404901GE” also.

c Panasonic Corporation 2014

Unauthorized copying and distribution is
a violation of law.
1
1. Lineup and Function Comparison

2
 INDEX

1.Lineup and Function Comparison

2.Board Layout
3.Video Signal Processing
4.Stand by / Start up Operation
5.SOS Protection Circuit and Troubleshooting
6.Difference of LED Drive Circuit
7.Other Information

3
Lineup and Comparison of the Functions (North/Central/South America) 1

TC-**AX800 TC-65AX900 TC-85AX850

(4K) (4K) (4K)

Main SoC Peaks Peaks Peaks

Pro4 Pro5 Pro5

Easy Operation New My Home Screen Y Y Y

My Stream Y Y Y
/Recommend
Multi user profile Y Y Y

Voice Print Y Y Y
Recognition
Voice Command Y Y Y

Voice Guidance Y Y Y

New Touch Pad Y Y Y

Remote Controller
Flat Design Menu Y Y Y
Info Bar Y Y Y
New built-in Camera Y Y Y

Networking My Home Cloud Y Y Y

Swipe & Share Y Y Y
Remote Sharing Y Y Y
Display Mirroring Y Y Y
Internet Apps Y Y Y
Web Browser (Flash) Y Y Y

The detail lineup and specification are different in each countries.

4
Lineup and Comparison of the Functions (North/Central/South America) 2

TC-**AX800 TC-65AX900 TC-85AX850

(4K) (4K) (4K)

Main SoC Peaks Peaks Peaks

Pro4 Pro5 Pro5

Networking DLNA Y Y Y
Network File Sharing Y (Server, Y (Server, Y (Server,
Client) Client) Client)
Transmit Audio N N N
by Bluetooth
Media player Y Y Y
HEVC Codec Y Y Y
USB-HDD recording N N N
SNS (Chat Mode) N Y(only Brazil) N
Other 3D Y(Active) Y(Passive) Y(Active)
Multi Window N N N
Terminal LAN port Y Y Y
WiFi adaptor Y Y Y
Bluetooth Y Y Y
HDMI / applicable to 4K 4 / (1) 4 / (1) 4 / (1)
USB2.0 /3.0 2/1 2/1 2/1
SD Card Y Y Y
Display Port 1 1 1
(applicable to 4K)

The detail lineup and specification are different in each countries.

5
Lineup and Comparison of the Functions (Europe/CIS) 1

TX-**AX800 TX-**AX630 TX-**AX900 TX-85X940

(4K) (4K) (4K) (4K)

Main SoC Peaks Peaks Peaks Peaks

Pro4 LD6 Pro5 Pro5
Easy Operation New My Home Screen Y Y Y Y
My Stream Y Y Y Y
/Recommend
Multi user profile Y Y Y Y
Voice Print Y Y Y Y
Recognition
Voice Command Y Y Y Y
Voice Guidance Y Y Y Y
New Touch Pad Y Y Y Y
Remote Controller
Flat Design Menu Y Y Y Y
Info Bar Y N Y Y
New built-in Camera Y N Y Y
Networking My Home Cloud Y Y Y Y
Swipe & Share Y Y Y Y
Remote Sharing Y Y Y Y
TV Anywhere Y Y Y Y
Display Mirroring Y Y Y Y
Internet Apps Y Y Y Y
Web Browser (Flash) Y Y Y Y

The detail lineup and specification are different in each countries. 6

Lineup and Comparison of the Functions (Europe/CIS) 2
TX-**AX800 TX-**AX630 TX-**AX900 TX-85X940
(4K) (4K) (4K) (4K)
Main SoC Peaks Peaks Peaks Peaks
Pro4 LD6 Pro5 Pro5
Networking DLNA Y Y Y Y
Network File Sharing Y (Server, Y (Client) Y (Server, Y (Server,
Client) Client) Client)

Transmit Audio N N N N
by Bluetooth
Media player Y Y Y Y
HEVC Codec Y N Y Y
USB-HDD recording Y Y Y Y
Other 3D Y(Active) Y(Active) Y(Passive) Y(Active)
Twin Tuner Y N Y Y
Hbb TV Y Y Y Y
Freetime (UK) Y Y Y Y
Multi Window Y Y Y Y
Terminal LAN port Y Y Y Y
WiFi adaptor Y Y Y Y
Bluetooth Y Y Y Y
HDMI / applicable to 4K 4 / (1) 3 / (3) 4 / (4) 4 / (4)
USB2.0 /3.0 2/1 2/0 2/1 2/1

SD Card Y Y Y Y
Common Interface 2 1 1 1

Display Port 1 0 Y Y
(applicable to 4K)

The detail lineup and specification are different in each countries. 7

Lineup and Comparison of the Functions (Oceania/Asia/Middle East/Africa) 1

TH-**AX800 TH-**AX670 TH-65AX900 TH-85X940

(4K) (4K) (4K) (4K)
Main SoC Peaks Peaks Peaks Peaks
Pro4 LD6 Pro5 Pro5
Easy Operation New My Home Screen Y Y Y Y
My Stream Y Y Y Y
/Recommend
Multi user profile Y Y Y Y
Voice Print Y Y Y Y
Recognition
Voice Command Y Y Y Y
Voice Guidance Y Y Y Y
New Touch Pad Y Y Y Y
Remote Controller
Flat Design Menu Y Y Y Y
Info Bar Y N Y Y
New built-in Camera Y N Y Y
Networking My Home Cloud Y Y Y Y
Swipe & Share Y Y Y Y
Remote Sharing Y Y Y Y
TV Anywhere Y Y Y Y
(only AU/NZ) (only AU/NZ) (only AU/NZ) (only AU/NZ) (only AU/NZ)
Display Mirroring Y Y Y Y
Internet Apps Y Y Y Y
Web Browser (Flash) Y Y Y Y

The detail lineup and specification are different in each countries. 8

Lineup and Comparison of the Functions (Oceania/Asia/Middle East/Africa) 2
TH-**AX800 TH-**AX670 TH-65AX900 TH-85X940
(4K) (4K) (4K) (4K)
Main SoC Peaks Peaks Peaks Peaks
Pro4 LD6 Pro5 Pro5

Networking DLNA Y Y Y Y
Network File Sharing Y (Server, Y (Client) Y (Server, Y (Server,
Client) Client) Client)

Transmit Audio N N N N
by Bluetooth
Media player Y Y Y Y
HEVC Codec Y N Y Y
USB-HDD recording Y (only Y (only Y (only Y (only
AU/NZ/HK) AU/NZ/HK) AU/NZ/HK) AU/NZ/HK)
Other 3D Y(Active) Y(Active) Y(Passive) Y(Active)
Twin Tuner Y N Y Y
Hbb TV Y(only AU) Y(only AU) Y(only AU) Y(only AU)
Multi Window Y Y Y Y
Double USB Sharing Y Y Y Y
Terminal LAN port Y Y Y Y
WiFi adaptor Y Y Y Y
Bluetooth Y Y Y Y
HDMI / applicable to 4K 4 / (1) 3 / (3) 4 / (4) 4 / (4)
USB2.0 /3.0 2/1 2/0 2/1 2/1
SD Card Y Y Y Y
Display Port 1 0 1 1
(applicable to 4K)

The detail lineup and specification are different in each countries. 9

 3D Method and option 3D Glass

2014 2013 2012 2011 2010

LCD PDP LCD PDP LCD PDP LCD PDP

85X940
Model AX900 VT50/
Method 85AX850 ZT60/ WT60/ VT30/
name AS800 GT50/ WT50/
AX800 VT60/ DT60/ GT30/
AS750 WT600 ST50/ DT50/ ET5 DT30 VT20
AX670 GT60/ FT60/ ST30/
AS740 UT50/ ET50
AX630 ST60 ET60 UT30
AS650 XT50
AS640
TY-
EP3D20*
TY- Passive N Y N N Y N N Y N N N
EP3D10*

TY-
ER3D4* Blue-
Y N Y Y N Y Y N N N N
tooth

TY-
EW3D3* Active
TY-
EW3D2*
IR N N N N N N N N Y Y Y
TY-
EW3D10*
No changeability
each other

10
2. Board Layout

11
Board Layout
TX-**AX630* T*- **AX800
TH-**AX670*
Camera

P P HE FR
G A A
K
G
K

K WiFi MD BT K
WiFi BT

T*-**AX900 TX/TH-85X940
#:This location is 65inch model. TC-85AX850

WiFi Camera BT WiFi Camera BT

LD FR PB
FR
G
K AP
P A
A
P

LP K MD MD K
12
Board Layout -4
65AX900 WiFi Module Bluetooth Module

Camera Module

Woofer

LD
FR

(T-CON)

AP
Not repairable,
One of the panel module A
GK
P

Speaker LP Speaker
K MD
(Behind the metal) (Behind the metal) (Behind the metal)
(Behind the metal)

Name Function Name Function Name Function

P-Board Main Power supply LP-Board Illumination LED A-Board Main Board
AP-Board DC/DC Power supply MD-Board Motion Detection FR-Board Flame Rate Convert (Up convert) Board
LD-Board Backlight Drive GK-Board Power switch, Key K-Board Remote Receiver, LED, Light sensor
13
Board Layout -4
TX/TH-85X940 , TC-85AX850
WiFi Module Bluetooth Module

Camera Module

Woofer Woofer

PB

FR
(LED Drive)
Not repairable, (T-CON)
One of the Not repairable,
panel module One of the panel module

A
P Behind the FR board:
(LED Drive)
Not repairable,
One of the
panel module

Speaker MD K Speaker

(Behind the metal) (Behind the metal)

Name Function Name Function

P-Board Main Power supply A-Board Main Board

PB-Board Power Supply, Power switch, Key FR-Board Flame Rate Convert (Up convert) Board
MD-Board Motion Detection K-Board Remote Receiver, LED, Light sensor 14
3. Video Signal Processing

15
 Video/Audio Signal Process (AX670/AX630)
AX670/AX630 (4K) OPT_out
AD_out HDMI format
/HP LVDS format

WiFi IC8601
Bluetooth (USB HUB)
USB

IC8000
Antenna TU670* IC68**
terminal (Peaks LD6)
TUNER De-Modulation
IC9000
Resize (NTK)
AV IP conv. To Panel
OSD Frame
Component 2D->3D Rate
SCART IC4500 Convert
(only Europe)
(RIO)
HDMI
Rx
IC8650
LAN
(LAN)
SD card
CI-slot
(only Europe)
HDMI2.0

IC3700
HDMI2.0
HDMI
SW
A
The input terminals are different by the models or countries.
16
 Video/Audio Signal Process (AX900/AX850/X940)
AX900/85AX850/85X940 (4K) ( H.265/HEVC
AD_out decoding is
OPT_out /HP built in Peaks
Pro5 IC )

WiFi
IC8650
Bluetooth IC1100 FR
(USB HUB) Stand-by
USB
/Control IC9500
CPU (GCX2)
USB3.0
(GENX) Left
Camera Frame
Rate
IC8000
SD card Convert
(Peaks Pro5)
IC8600
LAN (LAN) To Panel
Resize
CI-slot
(only Europe) IP conv.
OSD IC9600
Antenna TU670* 2D->3D (GCX2)
IC68** IC3701
terminal
TUNER Right
De-Modulation HDMI Frame
Rx Rate
AV Convert
IC3000
Component AV Switch
SCART
(only Europe)

HDMI2.0

HDMI2.0 IC3700
HDMI format
HDMI LVDS format
IC3500
Display Port Rx
DP to HDMI
A
The input terminals are different by the models or countries. 17
 Troubleshoot for Video Signal Problem
<LCD Panel Test Mode> :When abnormal picture is displayed, troubleshoot by the test pattern in LCD module.
If the picture is no problem, A board must be defective.
If the picture is also abnormal, LCD panel module must be defective.
How to enter :
While pressing "volume(-)" button of the TV unit,
press "option/yellow" button of the remote control 3 times within 2 seconds. Some patterns are
How to exit : automatically changed.
Switch off the TV unit The patterns are depend
on the LCD panel.
#)The test pattern is created by the circuit in LCD Panel Module(T-CON board).
A LCD Panel Module
IC8000
T-CON LCD Panel
(Peaks/MTK )

Resize
Test
Pattern A FR
IC9500 (GCX) LCD Panel Module
IP conv.
IC8000 Test
(Peaks PRO4 ) Pattern LCD Panel
T-CON

Resize IC9600 (GCX) Test

IP conv. Test Pattern
Only AX900/AX850/X940, AX800 model Pattern

<FR Test Mode> : The AX800 series have a FR Test Mode also. The test pattern output from FR board.
If above LCD Test Mode is OK, check this Test Mode next.
If LCD Test Mode is OK but this FR Test Mode is NG, FR board must be defective.
If both of LCD Test Mode and this FR Test Mode are OK, A board must be defective.

How to enter :
During the above LCD Panel Test Mode, press “OK” button of the remote control.
The pattern will change to shown in right.
How to exit : this pattern only
Switch off the TV unit
#)The test pattern is created by the IC in FR board.
#:AX900/AX850/X940 model will support by software running change and need some signal input. 18
 Troubleshoot for Video/Audio Signal Problem

<TV Self Test> : Customers also can check the picture and sound by internal data.
If the picture and sound is no problem, the reason of trouble is mostly not a TV.
How to display :
Menu HELP TV Self Test
#)The test pattern and test sound are created by the main IC on the A board.

TV Self Test

(OK)

1) During this indication

“Self Check of Service Mode”
is working at the background.
2) If NG, indication is shown. Yes No
# A board defective
3) If All OK, it shifts to picture
and sound test. 1.Antenna level low TV unit defective.
2.Connection mistake (A board, Panel or
3.Input devices NG Speaker)
*) A400/410/430 series do not support. 4.Input select mistake

Except AX900/AX850/X940/AX800 model Only AX900/AX850/X940/AX800 model

A FR
A LCD Panel Module IC9500 (GCX) LCD Panel Module
IC8000
IC8000
T-CON LCD Panel (Peaks PRO4 ) LCD Panel
(Peaks/MTK ) T-CON
Test Test
Pattern Pattern
Resize IC9600 (GCX)
Resize IP conv.
IP conv.

19
4. Stand by / Start up Operation
The power on sequence of AX670/AX630 model is basically same as
Full HD model. Refer to the Technical Guide “ITD1404901GE” .

20
 Start up Operation (AX670/AX630) AX670/AX630

6(light) LCD Module

P
Transformer
P6
T7301 Q7402/04
DC/DC
9-15 32V(*)
24V 24V IC7801 32V(*) Power LCD Panel
PFC Output For
T7201 LED
IC7201 LED 1-7 (Back T-CON
Drive Light)
board
DC/DC IC7800

5 3
IC7301
A02
PNL12V
4
P2
A16 44-51
BL_ON
11 11
Q7403/05
16V 1,2,3
Output
16V 1,2,3
F15V
1
DC/DC
IC7503
7
STB5V 7
STB5V
A
2
GK P5
9 9
TV_SUB_ON
3 12 12
POWER_ON KEY3

When the TV is plugged in, the power board outputs 5V for standby voltage.
POWER
Switch When the power supply receives the TV_SUB_ON signal, it outputs 2 different voltages:
•16V to the A board.
•32V to the LED backlight board in panel module.
After A board is ready to display, it outputs Backlight_on command to LED Drive circuit.
21
Start up Operation (85AX850/85X940) 85AX850/85X940
Transformer
PB T7301
T7302
Q7711/12 1-5,
11-15
P9
Power
For
LCD
POWER DC/DC
22
24V
LED Module
Switch LED
(Back
IC7600
Q7701/02 1-5,
Drive
Light)
66(light)
(light)
24V
11-15 LCD Panel
Output 24V
22 Power
P7 5 2 P7 3 P8 For
P11
2 LED T-CON
P6 5 P10 P6 3 LED
P
(Back
Transformer Drive board
Light)
PFC T7301
5 4
T7201
IC7201
T7302
3 PNL12V
FR30or31
BL_ON FR1 3-5
DC/DC
FR
12

IC7301
Q7403 1-4 16V 1-4
FR20
16V 9-12 16V 1-3
Output F15V
1
DC/DC 15
STB5V 2 7
IC7405 STB5V
Output P2 A02
STB5V
A
17 9
TV_SUB_ON
20 12
POWER_ON KEY3
When the TV is plugged in, the power board outputs 5V for standby voltage.
When the power supply receives the TV_SUB_ON signal, it outputs 2 different voltages:
16V to the A, FR board, 24V to the Panel module for LED drive.
After A and FR boards are ready to display, FR board outputs Backlight_on command to
LED Drive circuit. 22
 Start up Operation (AX900) -1 AX900
AX900 (4K) P3 AP3 AP1 LD1
Transformer 6(light) LCD Module
P T7301
T7302 Q7402/04 DC/DC
IC7550
LD LD5-20
48/40V 1-6 /52/54/56 1-4
VLED1,2,3,4 Power LCD Panel
PFC Output (68/56V) For
48/40V
T7201 10 LED
IC7201 LED (Back T-CON
Drive Light)
board
IC7700
5
DC/DC
IC7301
AP -7707
3 PNL12V
4
FR30or31
AP3 13
BL_ON 3-5
FR1
FR
12
P3 13
P2
Q7403 1-4 16V 1-4
16V FR20
Output 9-12 16V 1-3
F15V
DC/DC 15
STB5V 7
IC7405 STB5V
Output 1 2 STB5V
A
GK P5
17 9
TV_SUB_ON
3 20 12
POWER_ON KEY3
A02
When the TV is plugged in, the power board outputs 5V for standby voltage.
POWER
Switch When the power supply receives the TV_SUB_ON signal, it outputs 2 different voltages:
•16V to the A, FR, LD and AP board.
•48/40V to the AP board .
After A and FR boards are ready to display, FR board outputs Backlight_on command to
LED Drive circuit. 23
Start up Operation (AX900) -2 AX900
< from AC plug in to 1 : P board >
( TNPA5936** )
( PFC = OFF Q7422-25
P3
( Through ) D7203/09 T7301 Q7426-28
AC100V: 140V IC7403/04
D7102 T7201 C7213-7 T7302
AC240V: 330V)
/03 1-6
Rectifier rectifier 48/40V
( OFF )
PFC 11
Q7301
IC7201 14 Q7201
13
( OFF )
Q7302
HO 15 Q7408/09 Q7403/05
IC7402
LO 11 16V
IC7301 9 - 12
VCC 10 rectifier
VCC ( OFF )
D7104, VH 5V
1- 4
7105 Start Vcc
R7104- 1 feedback
7105 4 2
FB PC7301 IC7405 15
STB5V
6
IC7401
CE
PGS
(Good) PC7303
3

P P2
(*)The DC level is different by the LCD panel. 24
Start up Operation (AX900) -3 AX900
< from AC plug in to 1 : P board >

When the TV is plugged in, the rectifier start to produce DC voltage which leads
through PFC circuit directly to the power switches Q7301, Q7302. (PFC circuit
IC7201 does not operate at this moment.) Besides this DC voltage is provided also for
D7104, D7105 which provide start voltage to pin 1 of power supply IC 7301. When
the voltage on pin 1 rise up to predefined value IC7301 starts supplyinng of switching
pulses for Q7301, Q7302. Due to this current starts to lead through winding of T7301/
T7302 which starts to generate output voltages. One of these voltages VCC is used
for power supplying of the IC 7301 to its pin 10.
When the power supply starts up, the 16V is providing by IC7402 and Q7408,09.
This voltage leads to IC7405, which is 5 volts DCDC converter. This converter needs
to get starts commands, which is provides by IC 7301 pin 3. This pin is internaly
grounded in normal state and the information is carried to the secondary side by
PC7303. Finally there is input signal on pin 6 of IC7405 for start its operation.
This voltage (STB5V) is provided to A board via connector P2 pin15. So if the TV is
plugged in, STB5V is provided to A board without trigger signal.

25
 Start up Operation (AX900) -4 AX900
< from 1 to 2 : A board >
The stand-by CPU(IC1100) is separated from Main Soc of AX900/AX850/X940 model.

P
P2 A02
A K
LCD_TV_SUB_ON
17 9

5VS STB5V IC5000 STB3.3V IC1100

IC7405 15 7
Stand-by/ A10 K10
3.3V
Control
CPU REMOTE
GK P5
4 1
3
8 5
20 12 3.3V
KEY3
POWER
LED_on LED
Switch

IC8000
STB_I_**V
3.3V/1.8V/1.5V Peaks
/1.2V/0.9V
Pro5

OFF Standby
(It can receive only Power SW) (It can receive Power SW, Remote, Viera Link and so on)
North America ( Automatically ) Power LED: OFF
Except North America Power LED: OFF Power SW on Power LED: RED
26
Start up Operation (AX900) -5 AX900
< from 1 to 2 : A board >
The STB5V from pin15 of connector P2 is applied to the Analog ASIC (IC5000) for
supplying power to the Stand-by CPU(IC1100) on the A board. The Analog ASIC (IC5000)
converts the STB5V to STB3.3V. This voltage energize and prepare the microprocessor
(CPU) for program execution. The STB3.3V from the Analog ASIC (IC5000) is also applied
to the remote control receiver and the power LED on the K board through pins 5 of
connector A10/K10.
When the Power Switch on, the key3 signal is grounded. (#1)
The IC1100 lights on the RED LED and is ready to power on the TV by receiving the Power
switch on, Remote on, Viera Link and so on. This is a standby state.

(#1)Only North America model: Power switch on is no need, automatically this procedure is
operated after the TV is plugged in. But the RED LED does
not light.

When the power on command from the power switch, the remote control and so on is
provided to IC1100, IC1100 first outputs the “TV_SUB_ON” command. The “TV_SUB_ON”
command is provided to power board via pin 9 of connector A2.

(#) Just after transition to Stand-by mode, the TV_SUB_ON(16V) output for few minutes.
(North America model : 10s)

27
(Reference : State Transition Diagram)

< Except north America >

Pow-SW

Power Off Pow-SW Stand-by Power On

Remote
LED: OFF LED: Red LED: Green

Plug Plug Plug Plug Plug Plug

Out In Out In Out In

AC Off

< North America >

Stand-by Pow-SW / Power On
LED: OFF Remote LED: Red

Plug Plug Plug Plug

Out In Out In

AC Off
28
Start up Operation (AX900) -6 AX900
< from 2 to 3 : P board >
( TNPA5936** )
( PFC = ON Q7422-25
P3
D7203/09 T7301 Q7426-28
AC100V: 380V IC7403/04
D7102 T7201 C7213-7 T7302
AC240V: 380V)
/03 1-6
Rectifier rectifier 48/40V 48/40V
PFC 11 SRV-P40-48V
Q7301
IC7201 14 Q7201
13
12
Q7302
VCC
HO 15 Q7408/09 Q7403/05
IC7402
LO 11 16V
IC7301 9 - 12
Q7202 VCC 10 rectifier
16V
VCC
D7104, VH 5V SRV-16V 1- 4
7105 Start Vcc
R7104- 1 feedback
7105 4 2
FB PC7301 IC7405 15
6 STB5V
6
STB IC7401
(mode change) CE SRV-5.3V
PGS
(Good) PC7303
Q7303 3
PC7302

Standby/ON
Switch

P
L=ON Q7401 17
SUB-ON
P2
(*)The DC level is different by the LCD panel. 29
Start up Operation (AX900) -7 AX900
< from 2 to 3 : P board >

When the power board receives the TV_SUB_ON signal from IC1100 via pin 17 of
connector P2, it outputs 2 different voltages:
16V to the A board (on pins 9-12 of connector P2) ,FR board (on pin 1-4 of
connector P2) and AP board on pin 13 of connector P3).
48/40V to the AP board on pins 1-6 of connector P3.
This command is carried to the primary side by PC7302. It is connected to the Q7202
which provide power supply VCC of PFC circuit. The PFC starts to operate. After
switching on the Q7202, the VCC switch on the Q7303 also. Then the operation of the
IC 7301 changes the switching frequency from standby state to working state and output
voltages rise up.
Output voltages from transformer T7301 start rising up until the moment when IC7401
started to operate. This IC measures the 16V line output in the secondary side. The
output of this IC is provided by PC7301 to pin 4 of IC7301. IC7301 adjust the switching
frequency by this feedback signal.
The TV_SUB_ON signal also switches on the Q7403,05,26,28 to provide output
voltages (16V and 48/40V ) to other boards. The 48/40V is provided to AP board ( for
LED Backlight Power Supply ). The 16V is provided to the A board.

30
Start up Operation (AX900) -8 AX900
< 3 : A board (SUB voltage) >

AP LD
P Transformer
T7301 DC/DC FR
T7302 IC7550
F16V
PFC /52/54/56

T7201
1-6AP3 1-4
IC7201 48/40V P3
48V FR20
1-4 IC1100
Output Q7402
Stand-by/
DC/DC 17 9 LCD_TV_SUB_ON
Control
IC7301 DC/DC
STB3.3V CPU
IC7405 15 7 STB5V IC5000
16V P16V ANALOG
16V 9-12 1-4
Output ASIC
Q7403/05 STB_I_1.8V IC8000
1.8V
3.3V Peaks
0.9V STB_I_0.9V
1.5V STB_I_1.5V Pro5
P16V
P2

DCDCEN
(TNPA5936**) A02 1.2V STB_I_1.2V

IC8950
HDMI3.3V
IC5420 3.3V
5V IC5705
DMD 1.1V
1.1V
IC5400 SUB5V

3.3V SUB3.3V
PA2000

IC5703
1.8V REG_1.8V
IC8101/03
0.9V SUB_M_0.9V/SIB_I_0.9V

(*)The DC level is different by the LCD panel. 1.8V

IC8104 SUB1.8V A
31
Start up Operation (AX900) -9 AX900
< 3 : A board (SUB voltage) >

The 16V(P16V) from the P board via pin1-4 of connector A02 is applied to Analog ASIC
IC5000 and ICs (Voltage regulators) on the A board to generate the SUB-Voltages used for
signal processing operation.
: SUB0.9V, 1.8V, 3.3V, 5V and HDMI3.3V, DMD1.1V, REG1.8V
Each voltage regulators start up by high state of DCDCEN signal which is pull up to P16V.
So P16V is provided to A board, each SUB-voltage regulator ICs start output.

32
Start up Operation (AX900) -10 AX900
< 4 and 5 : A board (PNL voltage) >
Back Light LCD Module T-CON

FR30/31
Transformer AP LD
P T7301
T7302
VLED(*)
56/68V LD4
BL_ON
IC9500
FRC(GCX) IC1800
3-5 FR1
FR
DC/DC LED Drive F16V 12V PNL12V
PFC IC7550 IC7700-07 Tr 12 2
T7201 /52/54/56 2 12 7 4 FR15 2 FR16
1-4
IC7201 45 48 A16 40 A15
48/40V FR20
48V Panel_VCC_ON IC1100
1-4
Output Q7402 BL_ON
BL_SOS Stand-by/
DC/DC 17 9 LCD_TV_SUB_ON
Control
IC7301 DC/DC
STB3.3V CPU
IC7405 15 7 STB5V IC5000
16V P16V ANALOG
16V 9-12 1-4
Output ASIC
Q7403/05 STB_I_1.8V IC8000
1.8V
3.3V Peaks
0.9V STB_I_0.9V
1.5V STB_I_1.5V Pro5
P2 P16V
(TNPA5936**)

DCDCEN
A02 1.2V STB_I_1.2V

IC8950 HDMI3.3V
IC5420 3.3V
5V IC5705 DMD 1.1V
1.1V
IC5400 SUB5V

3.3V SUB3.3V
PA2000

IC5703
1.8V REG_1.8V
IC8101/03
0.9V SUB_M_0.9V/SIB_I_0.9V

(*)The DC level is different by the LCD panel. 1.8V

IC8104 SUB1.8V A33
Start up Operation (AX900) -11 AX900
< 4 and 5 : A board (PNL voltage) >

The P16V is also used to generate the PNL-Voltage on FR board. IC1100 outputs the
Panel VCC ON signal. IC1800 starts generating the PNL12V by this signal. The PNL12V
is provided to T-con circuit of the LCD Module.
After that, IC1100 outputs the BL_ON command to the IC9500 on the FR board. The
IC9500 output the BL_ON command to AP board and LD board.

It turns on the IC7550-7556 for DCDC in AP board and IC7700-7707 for LED backlight
drive in LD board. Then the backlight starts lighting, and LCD panel displays the pictures.
If the backlight drive circuit does not work normally, the BL_SOS signal is informed to
the IC1100. At that time, IC1100 stops outputting the TV_SUB_ON signal and blinks the
red LED 1 times.

34
Simple Power On Sequence

( Plug in )

P STB5V output

Power-SW/
Remote
Power on

A TV_SUB_ON signal

P PFC circuit (IC7201/T7201/7202 ) start working

P 16V/48(40)V output

A PANEL_VCC_ON signal

A PNL12V output

A BL_ON_ON signal

< Display start >

35
5. SOS Protection Circuit and Troubleshooting

The troubleshooting of AX670/AX630 model is basically same as

Full HD(LD6) model. Refer to the Technical Guide “ITD1404901GE” .

36
LED Blinking Summary
When an abnormality occurs in the unit, the “SOS Detect” circuit is triggered and the TV shuts down.
Shut down means that turn off the TV_SUB_ON signal. The power LED on the front panel will flash a
pattern indicating the circuit that has detected an abnormality.
Blinking time Estimated
Model name Peaks Peaks defect
LD6 Pro5 board
Detect content (AX670/630) (AX900/AX850/X940)
BL_SOS (LED driver) 1 Panel/P
(occurred 10s 1
after power on)

IROM SOS = Power on problem 1 P/A

(No F15V/SUB3.3V voltage) (occurred soon
after power on) ---
IROM SOS = Power on problem quick 3 P/A
(No SUB5V/SUB1.5V/SUB1.1V voltage)
No voltage SUB3.3V A
7 7
(after wake up once)

Audio amplifier: SOUND_SOS A/

9 9
Speaker
GCX_SOS A(AX630/670)
10 10 FR(AX900/AX
850/X940)

FAN_SOS --- 11 FAN/A

Back End SOS (inside of Peaks) 12 --- A
Emergency SOS 13 13 A
37
Protection Circuit (AX630/670) AX630/670
Back Light LCD Module
T-CON

P Transformer 9-15
34/48V
1-7 P6
IC8720
44-51 A16 IC9000
FRC
PFC T7301 PNL12V (NTK)
IC7800 12V
T7302

F15V
T7201 DCDC LED
Drive
Panel_VCC_ON IC8000
IC7201 IC4900 N SOS
AMP SOUND_SOS 9 Blink
24V 24/32V
Tr 14 14 BL_SOS
Output 1 Blink
Q7402 11 11 N SOS
BL_ON
DC/DC 9 9 LCD_TV_SUB_ON
ON OFF (OFF)
IC7301 IC5000 7 Blink
PA 7403 (OFF) Low
16V
1 1
voltage
Output detect
Q7403 FUSE 2 2 detect
3 3 N OFF
(OFF) Over voltage
protection
(TNPA6032**) P2 A02 F15V

DCDCEN
IC8750
IC8710 3.3V HDMI3.3V
IC5702
The troubleshoot of Blinking case 5V 1.2V DMD 1.2V
for AX670/AX630 model is basically IC8700 SUB5V
same as Full HD model (Peaks LD6). 3.3V SUB3.3V
PA2002

IC5704
Refer to the Technical Guide 1.8V TU1.8V
IC8100
“ITD1404901GE” . 1.1V SUB1.1V

(*)The DC level is different by the LCD panel. 1.5V

IC8101
SUB1.5V A38
Protection Circuit (AX900) AX900

Back Light LCD Module T-CON

Transformer APVLED(*) LD FR30/31

P T7301
T7302
56/68V
LD4
BL_ON
IC9500
FRC(GCX) IC1800
3-5 FR1
FR
DC/DC LED Drive 12V PNL12V
F16V
IC7550 IC7700-07 Tr
PFC 12 2
/52/54/56
T7201 2 12 7 4 6 FR15 2 FR16
IC7201 1-4
45 48 46 A16 40 A15
48/40V FR20
48V Panel_VCC_ON IC1100
1-4
Output Q7402 BL_ON GCX2_SOS
IC4901/02 BL_SOS Stand-by/
DC/DC AMP SOUND_SOS
17 9 LCD_TV_SUB_ON Control
DC/DC (OFF)
IC7301 STB3.3V
IC7405 15 7 STB5V IC5000 CPU
16V P16V ANALOG
16V 9-12 1-4
Output ASIC
Q7403/05 STB_I_1.8V IC8000
1.8V
3.3V 0.9V STB_I_0.9V Peaks
P16V 1.5V STB_I_1.5V Pro5
(TNPA5936**) P2 A02

DCDCEN
1.2V STB_I_1.2V

IC8950
3.3V HDMI3.3V
FANx3 FAN_VCC IC5911 IC5420
5V IC5705
1.1V DMD 1.1V
IC5914
FAN_VCC2 Over
IC5400 SUB5V
Volt-
FAN
3.3V SUB3.3V age
1.8V
IC5703 REG_1.8V
Protec-
tion
A08 0.9V IC8101/03
SUB_M_0.9V/SIB_I_0.9V
FAN_SOS
IC8104
1.8V SUB1.8V
Tr.x2
39
Troubleshooting for LED Blinking ( AX800: Quick 3 time blink ) AX900

LED blinks Detail error Board may defect

7 No voltage SUB3.3V detected P/A/FR

SUB3.3V is provided from P16V . If the P16V /SUB voltage is not supplied
LED blinks 7 times.

Blink Blink
quick 7 quick 7 Power on.
Remove P3 again Remove FR20 again No
Check if voltage P16V at
connector. Then connector. Then
pin 1-4 of A02 connector

FR
power on check. power on check. IC1800
before LED blinks?
Power on
12V
Correctly Change to Yes
F16V 3.3V
10 blinks (16V) FR20
Reconnect P3 and 1.5V
Remove LD1 FR board A board 1-4
connector. Then 1.1V
Blink
power on check.
AP LD
A
quick 7 AP1 LD1
Power on IC4901/02
Correctly AP board 10 9 AMP

LD board AP3 13

P16V

DCDCEN
P3 13

Q7403/05 1-4 IC5400

Remove P2 connector. SUB3.3V
No 16V 1-4
Check if short-circuit at
P board 16V 3.3V IC8000
pin 1-4 of A02 9-12

PA2000
connector?
P P2 A02 IC8101/03
0.9V SUB_M/I_0.9V
Peaks
Yes Pro5
(Shorted) 1.8V SUB1.8V
IC8104
A board 40
Troubleshooting for LED Blinking ( 9 time blink ) AX900

LED blinks Detail error Board may defect

9 Audio amplifier: SOUND_SOS A/Speaker, woofer

Audio amplifier is sourced power P16V from P board. If the amplifier work abnormally (may due
to short-circuit or overload), the SOUND_SOS signal will go low level and be detected by
IC1100 LED blinks 9 times.

Remove A12 connecter.

Power on. A board
Does LED blinks again? Yes
(9 time blinks)

No

L/R speaker
(wire of speaker)

A12
IC1100
IC4901/02 N SOS
16V 1-4 P16V AMP SOUND_SOS 9 Blink
From P BOARD

A02
A
41
Troubleshooting for LED Blinking ( 10 time blink ) AX900

LED blinks Detail error Board may defect

10 GCX_SOS (Initialization of IC9500/9600) FR

10 blinks are problem about initialization of GCX2 IC.

IN THIS CASE, FR BOARD DEFECTS

42
Troubleshooting for LED Blinking ( 11 time blink ) AX900

LED blinks Detail error Board may defect

11 FAN_SOS FAN/A

Check if the all fan

is working. A board
Clean the fans. Multi Fans are
stopped

Only one fan is

stopped
Just in case,
FAN disconnect A08 connector and check the output voltage
of pin 3, 6, 9, 12 just before shutdown occurred.

55AX900 65AX900 85AX850/85X940

A02 A02 A02
1-4 P16V 1-4 P16V 1-4 P16V

FAN 3 FAN_VCC2
FAN 3
FAN 6 FAN 3
FAN_VCC IC5911 FAN_VCC IC5911 FAN_VCC IC5911
FAN 6 FAN 6
FAN 9
IC5914 IC5914
FAN 9 FAN 9 FAN_VCC2

A A A
FAN 12
FAN 12 FAN 12

A08 A08 A08

43
Troubleshooting for LED Blinking ( 12/13 time blink ) AX900

LED blinks Detail error Board may defect

13 Emergency SOS A

12 and 13 blinks are problem about IC8000 and software item.

IN THIS CASE, A BOARD DEFECTS

44
6. Difference of LED Drive Circuit
(Troubleshooting for 1 time blink)
The troubleshooting of AX670/AX630 model is basically same as
Full HD(LD6) model. Refer to the Technical Guide “ITD1404901GE” .

45
 Structure of LED Drive Circuit
LCD Panel Module
34/48V
< 1.
1 LED drive circuit in P board > P24/32V
LED
(AX670/AX630) Drive Backlight

16V, STB5V Dr LCD Panel

The troubleshoot of Blinking case
for AX670/AX630 model is basically A
same as Full HD model ( 1 ).
Refer to the Technical Guide IC8000 PNL12V
Dr

“ITD1404901GE” .
(Peaks/MTK )
T-CON
Resize
IP conv.

LCD Panel Module

< 4.5 LED drive circuit in LD board > P 48V/40V AP 56/68V LD
(AX900) LED
Backlight
Drive

P16V, STB5V F16V Dr LCD Panel

A FR
BL_ON
Dr
IC1100 IC9500 PNL12V
(Stand-by ( GCX2 )
T-CON
CPU ) BL_ON
FRC
Up conv.
IC8000
(Peaks PRO4 )
IC9500
Resize ( GCX )
IP conv.
FRC
Up conv.
46
 Structure of LED Drive Circuit

LCD Panel Module

P PB 24V
LED

< 4.4 LED drive circuit in Panel > 390V

Drive

(85AX850/85X940) 24V
LED
Drive
Backlight

P16V, STB5V F16V Dr LCD Panel

A FR
BL_ON
Dr
IC1100 IC9500 PNL12V
(Stand-by ( GCX2 )
T-CON
CPU ) BL_ON
FRC
Up conv.
IC8000
(Peaks PRO4 )
IC9500
Resize ( GCX )
IP conv.
FRC
Up conv.
47
 Troubleshooting for LED Blinking ( 1 time blink ) LED Drive Circuit in LD Board -1 AX900
< 4.
5 LED drive circuit in LD board > (AX900)
AP1 LD1 (TNPA5938**)
AP LD
P3 AP3 9 9
(TNPA5936**)
4 4
1-6 1-6
48/40V 48/40V VLED1

P
L7600
(56/68V)
Q7550 SRV-VLED1
16V VCC
16V
13 13
IC7550
PWM1
8 Drive ICs
PA7500 STB LED1-K1
DCDC VLED2 IC7700-7708
(56/68V) LD5-20
TV_SUB_ON LED Drive
48/40V
2 2
G1
16 connectors
L7601

A IC1100
VCC
Q7556

PWM2
SRV-VLED2
Current
check
IC7552 LED1-K8
Stand-by/
Control DCDC
STB
L G2 (LED Backlight)
VLED3
( 1 Blink ) CPU (56/68V) O
1 1
Current
48/40V G check
L7602
A16 45 48 I
SRV-VLED3 LED1-K9
Q7562
VCC C
FR15 7 4
G9
PWM3 SRV-VLED4
BL_ON_INPUT
IC7554
STB
DCDC VLED4 LCD Panel
(56/68V)
IC9500 48/40V
3 3 LED1-L16
Module
L7603 G16
GCX2 PWM1/2/3/4
BL_ON Q7568 STB 1 Drive-IC output 16
5V
(Data/CLK/Sync)
VCC PWM4 LD2 drive signals.
IC7556 12 3 Tr 8Drive-IC x 16 = 128
FR30/31 (TNPA5941**) DCDC STB
2 128 block backlight
BL_ON (High=ON) 12 LD4
FR 12
2 BL_SOS (Low=Normal)
48
 Troubleshooting for LED Blinking ( 1 time blink ) LED Drive Circuit in LD Board -2 AX900
< 4.
5 LED drive circuit in LD board > (AX900)
LED blinks Detail error Board may defect

1 LED driver: BL_SOS LD/AP/P/Panel

BL_SOS is generated by one of the LED backlight drive IC in LD board and sent to IC1100 of A
board via connector LD4 at pin 12, FR15 at pin 7 when detecting malfunction of LED driver.
- Normal : BL_ON is high (3.3V) , BL_SOS is low (0V)

Disconnect AP1 connecter. Disconnect P3 connecter.

NG NG
Check if voltage 68/56V at Check if voltage 48/40V at
Replace P board
Test pin (SRV-VLED1-4) Test pin (SRV-P40_48V)
In AP board before shutdown In P board before shutdown

Yes Yes
68/56V 48/40V

Disconnect FR30/31 connecter.

Check if voltage 3.3V at Pin 12 NG
Reconnect AP1 connecter. Replace FR(A) board
of FR30/31(BL_ON) before
Check if voltage 5V at the shutdown
capacitor for 49pin (VREF5V
output) of IC7700 – 7707. Yes
*refer to the right drawing 3.3V IC7700 - IC7707
(just before shutdown)
Replace AP board
Power off. Short check between pins of
LD5-20 and GND. The pins are
LD5,8,10,12,14,16,18,20=pin1-6,10,11
LD6,7,9,11,13,15,17,19=pin1,2,6-11
There is NG

All OK Replace LD board

5V
Replace Panel Module 49
(Reference) New Check Mode for Backlight (Troubleshooting for LED 1 Time Blinking ) AX900

< Applicable Model : 55/65AX900 >

Before SOS 1 time blinking, a white screen pattern appears. Checking with the
white pattern, the defective board can be judged.
Jumper cable is required.

< Starting method >

Short circuit between two Test Point
in FR board with jumper cable. Power on Dark White pattern White pattern (LED 1 Blink)
(Display time: 2, 3 sec)
(“BL_TEST” and “SRV-3.3V”)
(See right photo)

Symptom Board failure

FR board (65AX900)
LD PCB
1/8 of the screen area is un-lit 1/8
(Drive IC failure)

16

LD PCB
1/128 of the failure area is brightly lit SRV-3.3V
８ (Switching FET shorted) Jumper cable BL_TEST

1/128

Normal lighting
LCD panel
(It is difficult to detect one LED
(Backlight LED shorted)
un-lit by the white pattern)

AP or LD board
No white pattern (check by previous page
troubleshoot)
50
 ( Reference ) Relation between
circuit and backlight location AX900 LD IC7700

L
LD5

O
P3 AP3 AP1 LD1
G
LD6
IC7550
1-6 1-6 4 4 I
48/40V DCDC VLED1
48/40V C

P
IC7552
2 2 LD7
IC7701
DCDC VLED2
L
O
IC7554
1 1 G
LD8
DCDC VLED3
I
C
IC7556 16
AP DCDC
3
VLED4
3
connectors

IC7702
LD9

L
< Backlight Block > O
G
16 connectors (LD5-LD20) LD10
I

VLED1 C

VLED2
8 Ics
VLED3
(IC7700-7707)
VLED4 --- LD11
8 ICs IC7707 ---LD20 51
 Troubleshooting for No picture and No OSD AX900

Patterns are
Try the “LCD Panel displayed Try the “FR Test
Replace A board
Test Mode” Mode”

No Picture
Replace FR board

LED blink (except TC- model)

LED off (TC- model)
Is the power LED situation No lit Disconnect P3 connecter.
Check if the Backlight is lit. No
changed after pushing the Check if voltage 48/40V at
(open the back cover and Replace P board
button for entering Test Test pin (SRV-P40_48V)
check from back side)
Mode? In P board before shutdown

No change Yes
Lit
(LED keep lit) 48/40V

Replace A board Disconnect AP1 connecter.

No
Check if voltage 68/56V at
Replace AP board
Disconnect FR1 connecter. Test pin (SRV-VLED1-4)
Check if voltage In AP board before shutdown
Replace FR board
12V(PNL12V) at Test pin
No (SRV-12V) in FR board Yes
68/56V
Yes
(12V) Replace LD board

If entering the test mode, Replace LCD Panel

the Power LED will Blink(except TC- model)
or OFF(TC- model). (T-CON part) Check also the Protection Circuit page about the voltage line.
(*) The DC level is different by the LCD panel.
52
7. Other Information

53
New heat dissipation specifications (PCS) for A-Board AX900/AX850/X940

< Applicable Model : AX900, AX850, X940 (Peaks Pro5 model) >
Peaks Pro5 IC use a new type of heatsink sheet (PCS: Phase Change Sheet, 20mm x20mm x 0.41mm).
This sheet can not be used again after removal. If we remove the heatsink (heat dissipation plate)
from Peaks Pro5 IC, a new sheet must be applied.
#Spare parts for A board including heat dissipation plate.

c HEATSINK
b Heat transfer rubber Heat transfer rubber
Heat dissipation plate Other IC Other IC PCB
Peaks Pro5
a
PCS Heat dissipation plate
Heat transfer rubber
FOUNDATION HEATSINK

LCD Panel
基板取り付け土台（ヒートシンク）

b
Heat dissipation plate
a PCS
(backside)

c
Caution:
Don’t keep power on without
Rear side of A board heat dissipation plate and
foundation heatsink.
The Peaks Pro5 will be damaged.
54
Notes on P PCB during exchange (85AX900) AX850/X940
< Applicable Model : 85AX850, 85X940 (85 inch model) >
The power supply of 85 inch model is configured P board and PB board.
If P or PB board is replaced, discharging the capacitor of PB board is required.
P board may be broken without discharging.

Discharge point A
(insert the lead of resister
to touching the solder
< Discharge method of P/PB board > of back side)
PB Board
1. Don’t disconnect the cable except AC plug.
Discharge with the recommended resistance
to the discharge point A or B (printed on the PB board).
2. After discharging (about 15 seconds), measure the voltage
at discharge point B. After confirming less than 15V, replace
the P/PB board.
(#The maximum voltage of discharge point is 390V)
*If replacing only panel module, unnecessary discharging.

Discharge point B
(=touching to the
lead of capacitor)

Recommended resistance: ERG5SJ102 (5W, 1kΩ)

P Board

55
 Revision History

Version Issued/Revised Revised content

date
Ver. 1.0 19th.Nov.2014 First version

56