Method 10B - Determination of Carbon Monoxide Emissions From Stationary Sources
Method 10B - Determination of Carbon Monoxide Emissions From Stationary Sources
Method 10B - Determination of Carbon Monoxide Emissions From Stationary Sources
1.1 Analytes.
regulations.
25 detailing CO measurement.
4.0 Interferences.
system; any residual CO2 and organics are separated from the
CO by GC.
5.0 Safety.
Section 6.1.
purpose.
Section 6.3.1.2.
Tedlar bag.
Section 7.1.
respectively.
concentrations.
ppm in air.
Transport.
Quality
Section Control Measure Effect
8.0 Sample bag/sampling Ensures that negative bias
system leak-checks introduced through leakage
is minimized
783
Quality
Section Control Measure Effect
10.1 Carrier gas blank Ensures that positive bias
check introduced by contamination
of carrier gas is less than
5 ppmv
10.2 Reduction catalyst Ensures that negative bias
efficiency check introduced by inefficient
reduction catalyst is less
than 5 percent
10.3 Analyzer calibration Ensures linearity of
analyzer response to
standards
11.2 Triplicate sample Ensures precision of
analyses analytical results
instrument used.
12.2.
12.1 Nomenclature.
ppm.
Pw
Bw ' Eq. 10B-1
Pbar
A
Cb ' Eq. 10B-2
R(1& Bw)
16.0 References.
of the following:
[Reserved]