Inductive sensor

NBB15-U1-Z2
< Sensor head bidirectional and rotatable
< 15 mm flush
< 2 LEDs indicator for 360° visibility

Dimensions

LED ye
40

LED ye M20 x 1.5

118
46 60
LED ye
5.3
30
40

LED ye
Release date: 2020-12-10 Date of issue: 2020-12-10 Filename: 203011_eng.pdf

Technical Data
General specifications
Switching function Normally open/closed (NO/NC)
Output type Two-wire
Rated operating distance sn 15 mm
Installation flush
Output polarity DC
Assured operating distance sa 0 ... 12.15 mm
Actual operating distance sr 13.5 ... 16.5 mm typ. 15 mm
Reduction factor rAl 0.3
Reduction factor rCu 0.3

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 1111 Singapore: +65 6779 9091
www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@de.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.com 1
 Inductive sensor NBB15-U1-Z2
Technical Data
Reduction factor r304 0.7
Output type 2-wire
Nominal ratings
Operating voltage UB 5 ... 60 V
Switching frequency f 0 ... 400 Hz
Hysteresis H typ. 5 %
Reverse polarity protection reverse polarity tolerant
Short-circuit protection yes
Voltage drop Ud ≤5V
Voltage drop at IL
Voltage drop IL = 100 mA, switching Ud ... 5 V
element on
Operating current IL 2 ... 200 mA
Off-state current Ir 0 ... 0.5 mA
Switching state indicator 2 LED, yellow
Functional safety related parameters
MTTFd 1133 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0%
Compliance with standards and directives
Standard conformity
Standards EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
EAC conformity TR CU 020/2011
UL approval cULus Listed, General Purpose
CCC approval Certified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature -25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection type screw terminals
Information for connection A maximum of two conductors with the same core cross section may be mounted on
one terminal connection!
tightening torque 1.2 Nm + 10 %
Core cross-section up to 2.5 mm2
Minimum core cross-section without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
Maximum core cross-section without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
Housing material PA/metal with epoxy powder coating
Release date: 2020-12-10 Date of issue: 2020-12-10 Filename: 203011_eng.pdf

Sensing face PA
Housing base plastic
Degree of protection IP68 / IP69K
Mass 225 g
Note Tightening torque: 1.8 Nm (housing)

Connection

1 3 L+

2 4 L-

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 1111 Singapore: +65 6779 9091
www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@de.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.com 2
 Inductive sensor NBB15-U1-Z2
Accessories
MHW 01 Modular mounting bracket

V1-M20-80 Receptacles, M12/M20; plastic version

Release date: 2020-12-10 Date of issue: 2020-12-10 Filename: 203011_eng.pdf

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 1111 Singapore: +65 6779 9091
www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@de.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.com 3