Version 16.

1
Restraint Fixings
Staifix Wall Ties &
ROOFING OTHER MASONRY MASONRY TO STEEL MASONRY TO TIMBER WALL STARTER MASONRY TO MASONRY
PRODUCTS PRODUCTS WALL TIES WALL TIES SYSTEMS WALL TIES
We are one team.
We are Leviat.
Leviat is the new name of
CRH’s construction accessories
companies worldwide.
Under the Leviat brand, we are uniting the
expertise, skills and resources of Ancon and its
sister companies to create a world leader in fixing,
connecting and anchoring technology.

The products you know and trust will remain an

integral part of Leviat’s comprehensive brand and
product portfolio. As Leviat, we can offer you an
extended range of specialist products and services,
greater technical expertise, a larger and more agile
supply chain and better, faster innovation.

By bringing together CRH’s construction

accessories family as one global organisation,
we are better equipped to meet the needs of our
customers, and the demands of construction
projects, of any scale, anywhere in the world.

This is an exciting change. Join us on our journey.

Read more about Leviat at Leviat.com

Our product brands include:

sales in

60 30+ 3000
locations countries people worldwide

Imagine. Model. Make. Leviat.com

Logo Guide
Look out for these logos.

These products
are supplied with
a UKCA and
CE or CE UKNI marking. Please see table on
page 32 to find the relevant approvals for

TY
each product.

These products are approved by

the British Board of Agrément.
14 5160

These products are Type A

ties and suitable for internal
separating walls to Approved
Document E.

These advanced energy-saving

products won the prestigious
Queen’s Award for Innovation
in 2018.

Availability
Ancon and Ancon Staifix Wall Ties are available
from builders merchants and other specialist
distributors throughout the UK. For details of
your nearest stockist please contact us on
0114 238 1 238.

Correct Installation
Wall ties should be pressed down in, and then
surrounded by, fresh mortar. In order to show
more details of the application, mortar has
been excluded from the photography in
this literature.
Masonry to Masonry Wall Ties Pages 4-11

MASONRY TO MASONRY
Ancon Staifix Wall Ties

WALL TIES
Ancon Wall Ties
Ancon Teplo Wall Ties
Ancon Staifix-Thor Helical Wall Ties
Other Standard Restraint Fixings

Wall Starter Systems Pages 12-15

Ancon Staifix Universal Wall Starter System

WALL STARTER
SYSTEMS
Ancon Staifix Starter Tie
Ancon Staifix Cavity Starter Tie

Masonry to Timber Wall Ties Pages 16-19

MASONRY TO TIMBER
Ancon Staifix Timber Frame Tie

WALL TIES
Ancon Staifix-Thor Helical Timber Tie
Ancon Teplo-L-Tie
Ancon Staifix Frame Tie

Masonry to Steel Wall Ties Pages 20-21

MASONRY TO STEEL
Ancon 25/14 Restraint System

WALL TIES
Other Masonry Products Pages 22-28
OTHER MASONRY

Ancon AMR Masonry Reinforcement

PRODUCTS

Ancon Staifix Insulated Plasterboard Nails

Ancon Staifix-Thor Helical Crack Stitching Kit
Remedial Wall Ties

Roofing Products Pages 29-31

Wire Balloons
PRODUCTS
ROOFING

Super-7 Thor-Helical Nail for Pitched Roofs

Super-8 Headed Helical Nail for Flat Roofs
Stainless Steel Cavity Wall Ties
for traditional masonry construction with cavities from 50mm to 225mm

Application
These stainless steel wall ties connect the
two leaves of a cavity wall. Product
selection is based on building type and
height, geographical location and cavity
Ancon Staifix Universal Insulation width. Specially designed safety ends
Retaining Clip (Eco Clip)
For use with standard Ancon/Ancon Staifix reduce the risk of injury during handling
stainless steel ties in partial fill cavities and installation.

4
 MASONRY TO MASONRY
Ancon Staifix HRT4 Light Duty Tie

WALL TIES
(Type 4 Tie to PD6697)

Length (mm) Cavity (mm)

200 50-75
225 76-100
250 101-125
275 126-150
Type 4 wall tie for use in the external walls of Available
houses up to 10 metres in height. Altitude and wind in packs
speed restrictions may apply. of 20 or 250

Ancon Staifix RT2 General Purpose Tie

(Type 2 Tie to PD6697)

Length (mm) Cavity (mm)

200 50-75
225 76-100
250 101-125
275 126-150
Type 2 wall tie for use in the external walls of houses Available
in packs
and small commercial developments up to 15 metres in
of 20 or 250
height. Altitude and wind speed restrictions may apply.

Ancon ST1 Heavy Duty Tie

(Type 1 Tie to PD6697 in M2 mortar)

Length (mm) Cavity (mm)

200 50-75
225 76-100
250 101-125
275 126-150
300 151-175
325 176-200
350 201-225
Type 1 wall tie for use in the external walls of Available
in packs
buildings of any height anywhere in the British Isles. of 250
Note: For internal separating walls of new-build attached dwellings use HRT4 only.
Check product packaging or contact us for more information.

5
Ancon Teplo Basalt Fibre Wall Ties
for ultra energy-efficient buildings with cavities up to 450mm

Application
Ancon Teplo wall ties are manufactured
from pultruded basalt fibres set in a resin
matrix. They have a thermal conductivity
of just 0.7W/mK and are shown in U-value
calculations to reduce insulation thickness
and wall footprint.
Teplo-Clip
Insulation retaining clip for use
with all Ancon Teplo wall ties

Teplo-L-Tie
Features a stainless steel
upstand for surface fixing

Teplo-BFR
Features a plain end for
resin anchoring to existing Teplo-BF
structure Cavity wall tie with
rounded safety ends

6
 MASONRY TO MASONRY
Ancon Teplo-BF4 (Type 4 Tie to PD6697)

WALL TIES
Length (mm) Cavity (mm)
200 50-75
225 76-100
250 101-125 Type 4 wall tie for use in external walls
550 401-425 of houses up to 10 metres in height.
575 426-450 Altitude and wind speed restrictions
may apply.

Ancon Teplo-BF3 (Type 3 Tie to PD6697)

Length (mm) Cavity (mm)

450 301-325
475 326-350 Type 3 wall tie for use in external walls
500 351-375 of houses and small commercial
525 376-400 developments up to 15 metres in
height. Altitude and wind speed
restrictions may apply.
Ancon Teplo-BF2 (Type 2 Tie to PD6697)

Length (mm) Cavity (mm)

200 50-75
225 76-100
250 101-125
275 126-150
300 151-175
325 176-200 Type 2 wall tie for use in external walls
350 201-225 of houses and small commercial
375 226-250 developments up to 15 metres in
400 251-275 height. Altitude and wind speed
425 276-300 restrictions may apply.

Ancon Teplo-BF1 (Type 1 Tie to PD6697)

Length (mm) Cavity (mm)
200 50-75
225 76-100 Type 1 wall tie for use in the external walls
250 101-125 of buildings of any height anywhere in the
275 126-150 British Isles.
Note: These ties are unsuitable for internal separating walls to
Approved Document E (use HRT4 on page 5).

7
Ancon Staifix-Thor Helical TJ2 Tie
for thin-joint blockwork

Application
Length (mm) Cavity (mm)
Hammer-driven cavity wall tie, ideal for
205 50
thin-joint blockwork and other applications
230 75
255 100
where the joints of the inner and outer
280 125 leaves of masonry do not course.
305 150 Suitable for buildings up to 15 metres in
height when used with high strength
blocks. Contact us for more details.
For thin-joint to thin-joint separating walls
use the Ancon Staifix HRT4 (see page 5).

Hammers
directly into
ks
Aircrete bloc

European Patent No. 1307303

8
 MASONRY TO MASONRY
WALL TIES
Installation

1 Keep the brickwork one course clear

during installation of the ties. Position
the tie against the inner leaf so that the
outer end will be located in the bed joint
of the external leaf.

2 Hammer the tie, through the insulation,

and into the blockwork to the correct
embedment.

Support tools are available to simplify installation.

3 Install a black Teplo

Insulation Retaining Clip
to restrain the insulation.

4 Build into the bed joint of the outer leaf

ensuring the tie is surrounded by
mortar.
85mm 70mm

Embedment
Staifix-Thor Helical TJ2 Thin-Joint Ties should have a minimum embedment of
85mm in the inner leaf of blockwork and 70mm in the outer leaf of brickwork.

9
Other Standard Ancon Wall Ties
lengths shown in red italics refer to items available within 24 hours

Ancon Teplo-L-Tie Ancon PPS Movement Tie

Low thermal conductivity restraint fixing For vertical movement joints

Lengths 165, 190, 215, 240, 265, 290, 315, 340, 365mm Lengths 175, 225, 250, 275, 300mm

Application Application
Basalt fibre frame cramp with Flat tie used with a L
stainless steel upstand, used debonding sleeve to
to join masonry to existing allow the masonry to
structures. expand or contract.
10mm Gap

DT Double Triangle SPB

Lengths 150*, 200*, 225*, Lengths 75, 100, 125, 150,
250**, 300mm** 175, 200, 225, 250, 275,
*Conforms to PD6697 as 300mm
a Type 2 tie (Heavy duty version
**Type 3 tie also available) Length

RD3 SDB
Lengths 250, 275mm Lengths 125, 150, 175, 200,
Conforms to PD6697 as 225, 250, 275, 300mm
a Type 3 tie

90mm

HRD4 SDV
Lengths 250, 275mm Lengths 125, 150, 175, 200,
Conforms to PD6697 as 225, 250, 275, 300mm
a Type 4 tie

90mm

SPS PPB
Lengths 150, 200, 225, 250, Lengths 125, 150, 175, 200,
275, 300mm 225mm
SPS CJ PPV
Lengths 150mm Lengths 125, 150, 175, 200,
(3mm thickness for 225mm
collar-jointed construction)

10
 MASONRY TO MASONRY
WALL TIES
Wall Tie Installation
Symmetrical Ancon wall ties (HRT4, RT2, ST1 and Teplo-BF) accommodate some site
tolerance in their length, for both cavity width variation and centring of the tie. In line with
PD6697: 2010 and Approved Document A, the minimum wall tie embedment is 50mm.
Longer wall ties will be required where cavities are outside the tolerance offered.
For walls in which both leaves are 90mm or thicker, ties should be installed at not less
than 2.5 per square metre (900mm x 450mm vertical centres).

Wall ties should be pressed down in,

and then surrounded by, fresh mortar.
Symmetrical wall ties should be centred
from the middle of the cavity to ensure equal
embedment in each leaf.

To ensure cavity wall ties are effective at

tying the leaves together they should be
installed as the inner leaf is constructed and
not simply pushed into a joint.

Ties should be installed level or with a slight

fall to the outer leaf, never towards the inner
leaf as this could provide a path for moisture
to cross the cavity.

Installed ties should be clear of mortar

droppings to allow the drip to function and
prevent water from crossing to the inner leaf
of masonry.

11
Ancon Staifix Universal Wall Starter System
for joining new walls to existing masonry

Application
Wall starter system with all the necessary
fixings to join a single skin of masonry
Insert
2.4 metres high to an existing wall.

Suitable for: Turn

• Brickwork and blockwork Slide
• Imperial and metric masonry units
• Single leaf and cavity walls
• Internal and external use
• Wall widths from 60mm to 250mm
• Masonry up to 8 metres in height
Wall ties slide within the fixing strip
Ideal for
to course with the bed joints of any conservatorie
s,
d
masonry unit. extensions an
ga rd en w al ls

12
 Universal Wall Starter Installation
Prior to installation remove any render, debris etc from the existing wall where the new wall
will be joined.

1 2 3

WALL STARTER
SYSTEMS
600/450mm
600/450mm 450/600mm

Overlap

225mm

225mm
450/600mm

225mm

• Mark the position of the • Loosely fix first strip at the • Insert wall ties by turning
five fixing holes so that bottom two fixing points. 90˚ clockwise in the fixing
the Wall Starter System • Insert second strip into the strip and build into the
will be central to the new top of the first strip and bed joints of the new
wall. When overlapped, loosely fix at the remaining wall, ensuring they are
the strips should be fixed three fixing points. surrounded by mortar
through the first and last (225mm vertical centres are
• Fully tighten screws, in any
slot, at the point of overlap recommended).
order, when both strips are
and at two other points in
in position.
between (alternate 450mm
and 600mm centres are
recommended).
• Drill 10mm diameter holes
and install wall plugs.

13
Ancon Staifix Starter Ties
for joining new walls to existing masonry

Wall Starter Tie

Screw-in tie supplied with an 8mm nylon
plug for joining new masonry to existing
walls without the need for jointing.
Ideal for the construction of conservatories,
Available extensions and garden walls.
job
singularly - no
too small

Cavity Starter Tie

Screw-in tie that simplifies the build of an
inner leaf of blockwork within an existing
structure. Supplied with an 8mm nylon
plug and a neoprene ‘o’ ring.

Length (mm) Cavity (mm)

180 50-70
e 200 75-95
Now availabl 230 100-120
in packs
of 10 Note: Embedment depth for above tie lengths should be 65-85mm
in mortar joint.

14
Ancon Staifix Wall Starter Tie Installation

1 Starter Ties should be fixed at 225mm

vertical centres in a line central to the
new leaf. Drill 8mm diameter holes,
45mm deep into the existing wall at an
angle of 30˚ to the horizontal. Insert wall
plugs provided and screw in ties.

WALL STARTER
SYSTEMS
2 Bend the tie into the bed joint
of the new brickwork. Build the tie
in ensuring it is surrounded by mortar.

This tie is suitable for use in masonry up to 8 metres in height. For buildings in particularly exposed areas, especially if the wall is
higher than 5 metres or the construction is single leaf, it would be advisable to carry out a check calculation using the wind code and
increase the density of starter ties if necessary.

Ancon Staifix Cavity Starter Tie Installation

Drill an 8mm diameter hole horizontally

1 into existing outer leaf of masonry.
Position the hole such that when the tie
is installed the safety end will be
located in the bed joint of the new inner
leaf of blockwork.

Insert the nylon plug. Slide the

2
neoprene ‘o’ ring on the tie and screw
into the plug. Build the tie into the inner
leaf of blockwork ensuring it is
surrounded by mortar.

15
Ancon Staifix Timber Frame Ties
for fixing masonry to timber frames up to four storeys in height

STF6 Timber Frame Tie

Cranked, Cranked cavity wall tie for use in the
to ease
construction of timber-framed buildings.
installation
Supplied complete with an annular ring
shank nail. Available in three lengths to suit
cavities of 50, 75 and 100mm.

TIM6 Helical Timber Frame Tie

Hammers directly into timber frames
without a pilot hole, through insulation
where necessary. Available in four lengths
Accepts an to suit cavities from 50mm to 150mm.
insulation
retaining clip

Ancon Teplo-L-Tie
For applications where a low thermal
conductivity restraint fixing is required
between masonry and a timber frame.
14 5160

Available in 9 lengths to suit cavities from

Basalt fibre
body removes 100mm to 300mm.
cold bridge

16
STF6 Installation

1 Position the tie on fresh mortar in the

bed joint of the outer leaf of masonry
with the upstand against the timber.

2 Hammer the nail, through the hole

in the upstand, into the timber
framework.

MASONRY TO TIMBER
WALL TIES
3 Build the tie into the bed joint of the
new masonry ensuring it is surrounded
by mortar.

Density of Timber Frame Ties

Timber Frame Ties should be installed at a density of 4.4 ties per
square metre in buildings where the basic wind speed does not
exceed 25m/s (BS6399-2: 1997 Code of Practice for Wind Loads).
The density should be increased to 7 ties per square metre in more
severe situations.

TIM6 Installation

1 2

35mm 65mm

17
Ancon Staifix Frame Tie
for fixing timber door and window frames to brickwork

Application
Screw-in tie used to join timber door and
window frames to brickwork.

No
pilot hole
required

18
Installation

1 Screw the tie horizontally into the

door or window frame at a bed
joint position.

2 Build the tie into the bed joint of the

new brickwork ensuring that it is
surrounded by mortar.

MASONRY TO TIMBER
WALL TIES
The Ancon Staifix Frame Tie should not be used as a wall starter tie (see page 14).

Vertical spacing of Ancon Staifix Frame Ties

Width of Required Vertical Spacing

Opening Modified for Coursing
(mm) (mm)
<1001 300
1001-1400 225
1401-2100 150
>2100 75
Suitable for buildings up to 15m in height on flat sites where the basic wind speed does not exceed 31m/s.

19
Ancon 25/14 Restraint System
for tying masonry to steel, concrete or timber frames through any insulation type

Applications
Tie Length (mm) Open Cavity (mm)
Channel-and-tie system for fixing masonry
100 35 - 59
to an in-situ structure through an
125 60 - 84
150 85 - 109 insulation layer.
Note: Other tie lengths to suit cavities up to 259mm are available. For fixing to steel or timber frames, Ancon
self-drilling high-thread screws should be
used through the channel and insulation
and into the frame. They are suitable for an
insulation depth up to 220mm.
For fixing to concrete, Ancon concrete
fixing screws should be used through the
channel and a stainless steel compression
25-14 Channel
sleeve, located in the insulation, and into a
pilot hole in the concrete. They are suitable
Ancon Compression Sleeve for an insulation depth up to 267mm.
High-Thread Fixing
Screw (referenced
HTSS)
Suitable for
all insulation
Concrete Fixing Screw SD25 types
(referenced CFS) Wall Tie

20
Installation (shown with rigid insulation and a steel frame)

1 Fix channel to steel frame with Ancon

self-drilling screws. Contact us for fixing
centres. Ancon 25/14 channel is
supplied with pre-punched holes at close
centres to ensure a fixing position is
always located near the end when the
channel is cut on site.

The spacing of ties is based on the height

of the building and geographical location.
2
Contact us for details. SD25 wall ties
can be positioned at any point along the
channel’s length. Ties should achieve a
minimum embedment of 50mm in the
outer leaf and be pressed down in fresh
mortar.

3 Build the tie into the bed joint of the new

masonry ensuring it is surrounded by
mortar.

MASONRY TO STEEL
WALL TIES
Notes: Screws are available in various lengths to accommodate an insulation thickness of up to 220mm. Wall ties are
available in lengths from 100mm to 300mm to suit open cavities up to 259mm.
Contact us for installation details for other frame and insulation types.

21
Ancon AMR Masonry Reinforcement
to strengthen masonry panels

AMR Applications
AMR Width Wall Thickness
Stainless steel reinforcement, installed in
60mm 100-125mm Brick/Block
a bed joint to strengthen masonry walls.
100mm 140-150mm Block
Manufactured in lengths of 2700mm.
150mm 190-200mm Block
175mm 215mm Block Available in five wire diameters and
four widths, AMR suits the majority of
wall conditions.
For collar-jointed walls use Ancon AMR-CJ.

Suitable for
internal and
es
external leav

22
Laps and Positioning
The position of laps should be staggered throughout the masonry panel.
Laps should be a minimum of 225mm in length and include one cross wire. Laps can
be achieved by either stacking the product or positioning lengths side by side.

Positioned
side by side

min. 225mm

Stacked

min. 225mm

Note: Overall thickness of AMR when stacked is less than 6mm.

Corners
Prefabricated corner units can be manufactured to provide true continuity of reinforcement.
Alternatively, Ancon AMR can be cut and bent on site.

OTHER MASONRY
PRODUCTS

23
Insulated Plasterboard Nails
Fire-proof steel fixing for securing insulated plasterboards

Available Lengths Application

A one piece steel fastener (referenced
65, 85, 105, 125, 145mm
ISF18A) with a dish-profiled head for
mechanically securing drywall and
insulated plasterboard panels to walls.
This fire-proof steel fastener has a self-
tapping helical shank with work-hardened
blades that cut into a wide range of
masonry and timber substrates.

Available
in packs
of 20

24
Installation
The fixings are driven-in by an adaptor, which is powered by a standard SDS hammer drill.
The anchor drives directly into aircrete blocks and softwood timber. A 5mm pilot hole is
recommended for brick, concrete block and hardwood.
A 6mm pilot hole is required for structural concrete and engineered brick.

Substrate Embedment depth

Aircrete Block 50-75mm
Brick/Concrete Block 40-60mm
Softwood 35-50mm Standard SDS Adaptor

50mm

300mm

600mm

2.4m 2.4m

Professional SDS Adaptor Set

1.2m 1.2m
= Position of fixing = Position of fixing
If used with ‘dot and If used instead of
dab’ method ‘dot and dab’ method

OTHER MASONRY

3 fixings are required per panel if used with

PRODUCTS

‘dot and dab’ method. Each dab should

be 50mm to 75mm wide and approx.
250mm long.
12 fixings are required per panel if used
instead of ‘dot and dab’.

25
Ancon Staifix-Thor Helical Crack Stitching Kit
for the permanent repair of cracked masonry
500mm 500mm

500mm 500mm

Wall Slot Bar Application

Thickness Depth Depth This kit contains all the necessary
102mm 30mm 20mm components to permanently repair vertical
215mm 40mm 30mm or stepped cracks in masonry.
• Grout mixing paddle
The high stre
ngth, • Cementitious grout (3 litres)
non-disruptiv
tio
e
n
• Grout applicator gun with flat nozzle
re pa ir so lu
• Ten stainless steel helical bars
(6mm ø x 1000mm)
• Finger trowel

Notes:
1. This system is also suitable for rendered/plastered walls
2. Vertical spacing is normally every 4 to 6 brick courses
(300 - 450mm), however this should be checked with the
structural engineer
3. Where cracks are within 500mm from corners or reveals,
the bar should be bent and bonded 100mm around the corner
4. If two or more cracks are close together, bars can be lapped.
Laps should be at least 500mm and the bar should extend
500mm from the outer cracks

26
Installation
It is essential that the cause of the cracking is established by a structural engineer
and then eliminated, prior to the installation of this system.

Cut a slot in the mortar joint to the specified

depth that extends just over 500mm each
1 side of the crack (recommended equipment:
Twin-bladed diamond-tipped wall chaser).
Ensure the mortar is completely removed
to reveal the top and bottom faces of the
masonry. Remove all loose mortar from the
slot and flush with clean water.

2 Connect the paddle to a power drill,

blend the components of the grout
together in the tub and load into the gun.
Apply a continuous bead (approximately
10-15mm thick) to the back of the slot.

3 Push the helical bar into the face of the

grout, to the depth specified, so that
the bar extends 500mm each side of
the crack.

4 Apply a second, continuous bead of grout

to the slot, ensuring the bar is covered.
With the finger trowel, force the grout back
into the slot 10mm from the surface, and
OTHER MASONRY

ensure the bar/grout composite is tightly

PRODUCTS
OTHER MASONRY

packed.
PRODUCTS

5 Make good the bed joint and fill the vertical

crack with an appropriate filler or mortar.

27
Ancon Remedial Wall Ties

MM63 Ancon AC 31C

Lengths 200, 225, 255mm Lengths 175, 200,
225mm

RM63
Lengths 200, 225, 250,
300mm TeploTie2
Lengths 275, 300, 325,
375, 400, 425mm

Staifix R/R
Lengths 180, 200, HRT4/R
220mm Lengths 200, 225,
250mm

TYPE A

Stairib Bar
Length to order Type A R/R
6, 8mm dia. Length 225mm

TYPE A

Ancon AC 31
Lengths 175, 200, 225,
250, 275, 300mm

Lengths in red italics refer to items available within 24 hours.

Setting tools, resin cartridges, resin guns and mixing nozzles are all available.
Contact us for more details on our range of remedial wall ties and ancillary products.

28
Ancon Staifix Wire Balloons

A simple and effective way of keeping chimneys and downpipes clear from
nesting birds, leaves and other debris.
-free
Available in six standard sizes, wire balloons are manufactured Maintenance
and easy
from stainless steel or galvanised steel mesh. to install

Wire Stainless Galvanised

Balloon Size Mesh Size Mesh Size
2½” 1” ½”
3” 1” ½”
4” 1” ½”
6” ¾” ¾”
8” 1” ¾”
9” 1” ¾”
PRODUCTS

Note: Stainless steel balloons are manufactured to order.

ROOFING

Galvanised steel balloons are available ex-stock.

29
Helical Nails for Warm Roof Construction
Helical nails are a quick and reliable fixing for use in warm roof applications. Unlike
traditional nails, they rotate as they are driven in, inducing a self-tapping action and
consequently do not split or bounce timbers.

Super-7™ Thor-Helical Nail GB Patent No. 2426949

for Pitched Roofs
Stocked Lengths:
140, 150, 160, 165, 175, 185mm
Note: Other lengths are available in increments of 5mm.
We recommend a minimum counter batten
thickness of 38mm.

Super-7™ Alignment Tool

for Pitched Roofs

European Patent No. 1307303

HeliCalc Calculator
HeliCalc is a free web-based program which calculates the length,
density and quantity of Super-7 nails required for a specific project.
Visit www.helicalc.co.uk or contact us for more information.

Super-8 Headed Helical Nail

for Flat Roofs

Standard Lengths:
145, 170, 195mm
Note: Other lengths are available on request (min. 135mm)

In straight
not in skew
Helical Nails for
Warm Roof Construction

For more information on the above products please refer

to the ‘Helical Nails for Warm Roof Construction’ brochure

30
Applications
Pitched Roofs

Min.
35mm

Helical nails fix counterbattens to rafters, without compressing the layer of insulation
in-between.

Flat Roofs

Min.
35mm
PRODUCTS

Headed helical nails fix plywood/insulation composite roof panels to joists.

ROOFING

31
Product Approvals & Certifications
From the 1st January 2021 there will be a number of changes to the product
approvals on our products due to changes to product marking.
The table below highlights the relevant markings for each of our Ancon Staifix Wall Tie
& Restraint Fixings range. Full DoPs can be downloaded from our website at:
www.ancon.co.uk/approvals
UKCA Marking
The UKCA (UK Conformity Assessed) marking is the new UK product marking that will be used for
goods being placed on the market in Great Britain.

CE UKNI Marking
The UKNI marking is a new conformity marking for products placed on the market in Northern
Ireland which will be used on products that have undergone mandatory third-party conformity
assessment by a body based in the UK.

CE Marking
For products used in Europe the existing CE mark will still remain. Our DoPs have been updated,
please visit www.ancon.co.uk/approvals for the latest version for the products highlighted below.

Product
HRT4 3 – 3
RT2 3 – 3
ST1 3 – 3
SDB 125-300mm 3 – 3
SPB 75-300mm 3 – 3
PPS 150-300mm 3 – 3
PPB 125-225mm 3 – 3
SPV 75-300mm 3 3 –
PPV 125-225mm 3 3 –
Cavity Starter Tie 3 3 –
Frame Tie 3 3 –
StarterTie 3 3 –
STF6 50mm, 75mm, 100mm 3 3 –
TJ2 205, 230, 255, 280, 305mm long 3 3 –
DT 150-300mm 3 3 –
SPS 150-300mm 3 – 3
SPS CJ 150mm 3 3 –
TFMT7 50-150mm cavity 3 3 –
TIM6 175, 200, 225, 250mm 3 3 –

SDV 125-300mm 3 3 –

To download the relevant approvals and certifications visit www.ancon.co.uk/approvals

32
Worldwide contacts for Leviat:

Australia Germany Poland

Leviat Leviat Leviat
98 Kurrajong Avenue, Liebigstrasse 14 Ul. Obornicka 287
Mount Druitt Sydney, NSW 2770 40764 Langenfeld 60-691 Poznan
Tel: +61 - 2 8808 3100 Tel: +49 - 2173 - 970 - 0 Tel: +48 - 61 - 622 14 14
Email: info.au@leviat.com Email: info.de@leviat.com Email: info.pl@leviat.com
Austria India Singapore
Leviat Leviat Leviat
Leonard-Bernstein-Str. 10 309, 3rd Floor, Orion Business Park 14 Benoi Crescent
Saturn Tower, 1220 Wien Ghodbunder Road, Kapurbawdi, Singapore 629977
Tel: +43 - 1 - 259 6770 Thane West, Thane, Tel: +65 - 6266 6802
Email: info.at@leviat.com Maharashtra 400607 Email: info.sg@leviat.com
Tel: +91 - 22 2589 2032
Belgium Spain
Email: info.in@leviat.com
Leviat Leviat
Industrielaan 2 Italy Polígono Industrial Santa Ana
1740 Ternat Leviat c/ Ignacio Zuloaga, 20
Tel: +32 - 2 - 582 29 45 Via F.lli Bronzetti 28 28522 Rivas-Vaciamadrid
Email: info.be@leviat.com 24124 Bergamo Tel: +34 - 91 632 18 40
Tel: +39 - 035 - 0760711 Email: info.es@leviat.com
China
Email: info.it@leviat.com
Leviat Sweden
Room 601 Tower D, Vantone Centre Malaysia Leviat
No. A6 Chao Yang Men Wai Street Leviat Vädursgatan 5
Chaoyang District 28 Jalan Anggerik Mokara 31/59 412 50 Göteborg
Beijing · P.R. China 100020 Kota Kemuning, 40460 Shah Alam Tel: +46 - 31 - 98 58 00
Tel: +86 - 10 5907 3200 Selangor Email: info.se@leviat.com
Email: info.cn@leviat.com Tel: +603 - 5122 4182
Switzerland
Email: info.my@leviat.com
Czech Republic Leviat
Leviat Netherlands Grenzstrasse 24
Business Center Šafránkova Leviat 3250 Lyss
Šafránkova 1238/1 Oostermaat 3 Tel: +41 - 31 750 3030
155 00 Praha 5 7623 CS Borne Email: info.ch@leviat.com
Tel: +420 - 311 - 690 060 Tel: +31 - 74 - 267 14 49
United Kingdom
Email: info.cz@leviat.com Email: info.nl@leviat.com
Leviat
Finland New Zealand President Way, President Park,
Leviat Leviat Sheffield, S4 7UR
Vädursgatan 5 2/19 Nuttall Drive, Hillsborough, Tel: +44 - 114 275 5224
412 50 Göteborg / Sweden Christchurch 8022 Email: info.uk@leviat.com
Tel: +358 (0)10 6338781 Tel: +64 - 3 376 5205
United States of America
Email: info.fi@leviat.com Email: info.nz@leviat.com
Leviat
France Norway 6467 S Falkenburg Rd.
Leviat Leviat Riverview, FL 33578
6, Rue de Cabanis Vestre Svanholmen 5 Tel: (800) 423-9140
FR 31240 L’Union 4313 Sandnes Email: info.us@leviat.us
Toulouse Tel: +47 - 51 82 34 00
Tel: +33 - 5 - 34 25 54 82 Email: info.no@leviat.com
For countries not listed
Email: info.fr@leviat.com
Philippines Email: info@leviat.com
Leviat
2933 Regus, Joy Nostalg,
ADB Avenue
Ortigas Center
Pasig City
Tel: +63 - 2 7957 6381
Email: info.ph@leviat.com

Leviat.com

Notes regarding this catalogue

© Protected by copyright. The construction applications and details provided in this publication are indicative only. In every case, project
working details should be entrusted to appropriately qualified and experienced persons. Whilst every care has been exercised in the preparation
of this publication to ensure that any advice, recommendations or information is accurate, no liability or responsibility of any kind is accepted by
Leviat for inaccuracies or printing errors. Technical and design changes are reserved. With a policy of continuous product development, Leviat
reserves the right to modify product design and specification at any time.
For more information on these products, contact:
Leviat
President Way
President Park
Sheffield, S4 7UR
United Kingdom
Tel: +44 (0) 114 275 5224
Fax: +44 (0) 114 276 8543
Email: info.ancon.uk@leviat.com

For sales enquiries:

Email: sales.ancon.uk@leviat.com
For technical enquiries:
Email: tech.ancon.uk@leviat.com
Ancon.co.uk
Leviat.com

Notes regarding this catalogue

© Protected by copyright. The construction applications and details provided in this publication are indicative only.
In every case, project working details should be entrusted to appropriately qualified and experienced persons. Whilst
every care has been exercised in the preparation of this publication to ensure that any advice, recommendations or
information is accurate, no liability or responsibility of any kind is accepted by Leviat for inaccuracies or printing errors.
Technical and design changes are reserved. With a policy of continuous product development, Leviat reserves the right
to modify product design and specification at any time.

Imagine. Model. Make. Leviat.com