PRODUCT INFORMATION RAJ PETRO SPECIALITIES Pvt.

Ltd.

ELECTROL ® - Uninhibited Transformer Insulating oils

Description: ELECTROL® Series of Uninhibited Transformer oils are severely refined hydro-cracked /
hydro-treated virgin Mineral insulating oils with highest degree of purity and stability.
ELECTROL® oils are manufactured from judiciously selected blend of latest technology
feed stocks.

ELECTROL® Series of Uninhibited Transformer oils are intended for use in equipment
where normal oxidation resistance is required. For more severe applications, requiring
operations at elevated temperatures & greater oxidation resistance, our range of
ELECTROL® Inhibited & ELECTROL® Inhibited High Grade oils may be considered.

Characteristics: ELECTROL® oils offer special advantages over conventional transformer oils, such as;
Very low sulphur and no DBDS.
Non corrosive as tested by all present and proposed methods, i.e. meet
requirements of the standard DIN & ASTM tests and also the proposed CIGRE
test.
Higher Flash point, resulting on Low evaporation losses and better safety
Remarkably low sludge and acidity formation, in both ageing and oxidation tests,
results in longer life of oil and equipment
Low viscosity oils offering excellent and fast heat transfer

Applications : ELECTROL® oils are highly suitable for all grades of

Power Transformers, Distribution Transformers,
Circuit Breakers,
Oil filled switches
X-ray equipment.

Quality/Approvals: ELECTROL® Uninhibited oil series conform to and exceed the requirements of IS
335:2005, IEC 60296:2003, (superseding IEC 296:1982 Class I & Class II ), BS 148:1998
Class I & Class II & JIS C2320 Class I.

Packaging Options: ELECTROL® oils are offered in 200-210 ltr. Steel Drums & in bulk in Flexi bags or ISO
tanks. Within India, ELECTROL® oils are delivered through a company owned dedicated
purpose built Road Tankers.

Storage Precautions: Extreme care is taken while packing these products, including filling of drums in inert
atmosphere, as Electrical Insulating oils / Transformer oils are very sensitive to very minute
concentrations of contaminants, such as moisture, particulate matter, fibres, etc. Hence, care
should be taken to store ELECTROL® oils in a clean and dry condition. It is strongly
recommended that all storage tanks / drums be maintained such that oil is not in contact with
atmospheric air. Also Oils should always be stored indoors in climate controlled environments
Health & Safety: See corresponding product MSDS
Contact 2A-D, Doshi Towers , 124, G.D. Ambekar Marg,
information: 156, Poonamallee High Rd Ambawadi, Kalachowki
Kilpauk, Chennai-10. India Cotton Green, Mumbai -33. India
Ph: (91)-44-42288900 Fax: +91-44-42288912 / 995 Ph: (91)-22-24718001 Fax: (91)-22-24710898
E-mail: For International Sales : exports@rajgrp.com. For Sales Within India: mktm@rajgrp.com / marketing_rl@rajgrp.com
Website: www.rajgrp.com
The information contained herein is, to our best knowledge, true and accurate, but all recommendations or suggestions are made without guarantee, since the conditions of use
are beyond our control. There is no implied warranty of merchantability or fitness for purpose of the product or products described herein. . Determination of the suitability of
the product for the application contemplated by the user is the sole responsibility of the user. In submitting this information, no liability is assumed or license or other rights
express or implied given with respect to any existing or pending patent, patent applications or trademarks. The observance of all legal regulations and patents is the
responsibility of the user.
200803 /ELECTROL / Uninhibited Page 1 of 2
 PRODUCT INFORMATION RAJ PETRO SPECIALITIES Pvt. Ltd.

ELECTROL ® - Uninhibited Transformer Insulating oils

Specification Limits
Test Description Test Method ELECTROL® ELECTROL® ELECTROL®
ELECTROL®
A U B
Function
Kinematic Viscosity at 40o C mm2/s, Max BS EN ISO 3104 - 16.51 12.0 11
at 27o C mm2/s, Max IS 1448 (part-25) 27 - - -
at -15o C mm2/s, Max BS EN ISO 3104 - 800 - -
at -30o C mm2/s, Max - - 1800 1800
Pour Point oC, Max BS EN ISO 3016 -6 -30 -40 -45
Water Content, in Bulk, mg/kg, Max 50 20 20 20
IEC 60814
in Drum & IBC mg/kg, Max 50 30 30 30
Break Down Voltage, kV, Min
Typical Properties & Characteristics

As Delivered IEC & BS 60156 30 30 30 30

After treatment 60 50 70 70
Density at 20 oC, g/ml, Max BS EN ISO 3675 - 0.895 0.895 0.895
at 29.5 oC, g/ml, Max IS 1448 0.890 - - -
DDF at 90 oC, Max IEC 60247 0.002 0.005 0.005 0.005
Refining/stability
Appearance Visual Transparent Clear, odourless liquid free from suspended impurities
Neutralisation Value / Acidity, mg KOH/g, IEC 62021-1
BS 148 -1998
0.03 0.02 0.01 0.01
Max
Interfacial tension, mN/m, Min ISO 6295 40 40 40 40
BS 2000 Part 373 No general requirement.
Total Sulphur Content, % , Max ISO 14596
0.15% 0.15%
o
Corrosive Sulphur silver strip, 100 C, 18hrs DIN 51353 Non Corrosive
o BS 5680 /IS 335
Cu Strip, 140 C, 19 hrs Annex B
Non Corrosive
Cu Strip, 150 oC, 48 hrs ASTM D1275-B Non Corrosive
o TF A2-32.01(
(CIGRE Proposed)150 C, 72 hrs method 2)
Non corrosive
IEC 60666/ BS 4
Antioxidant Additives, %, Max 5984
0.05% Not detectable Not detectable Not detectable
2-Furfural content, mg/kg, Max IEC & BS 61198 - 0.10 0.10 0.10
Performance
Oxidation Stability2,164 hrs
IEC & BS 61125
- Total acidity, mg KOH/g, Max METHOD- A & C 0.4 0.4 0.4 3 0.4
- Sludge, %, Max 0.1 0.1 0.1 3 0.1
DDF at 900C, Max IEC 60247 - - 0.5 -
Gassing tendency at 50 Hz after BS 5797 / IEC No general
+5 +5 +5
120 Min. mm3/min, Method A (Max) 60628,A requirement
Health, safety and environment (HSE)
Flash Point, PMCC, 0C, Min BS EN ISO 2719 140 140 135 130
Polycyclic Aromatics (PCA) content, % Max BS 2000 (P: 346) 3.00
Polychlorinated biphenyls (PCB) content IEC & BS 61619 Not Detectable
Conforms to Standards
5
IS 335: 05
IEC 296:82:Class I & BS 148:98: Class I x
IEC 296:82Class II & BS 148:98 Class II x x x
IEC 60296:03 Table 2 : U x x
JS 2320 Class I x
Note: 1. For JS C2320 Kin. Viscosity limits will be maintained at 13 mm2/s, Max
2. The Oxidation stability test is performed at 100 C & 120oC, or 110oC with O2 or Air, as per the prescribed procedure under IEC / BS or ASTM or IS.
3. While IEC 60296:03 permits limit of Total Acidity at 1.2 mg KOH/g Max and Sludge at 0.8% Max, ELECTROL® U conforms to more stringent limits.
4. As per IS 335, transformer oils with Antioxidant content upto 0.05% are considered as uninhibited oils
5.ELECTROL will meet and surpass other tests as per IS 335, including Specific Resistance & Ageing Characteristics
The above data is indicative of recent average Values only. Minor variations, which do not affect product performance or quality, may be expected in manufacture. Specific
requirements (e.g. Custom viscosities, specific regional/tender requirements, etc) will be custom-made on request

Health & Safety: See corresponding product MSDS

E-mail: For International Sales: exports@rajgrp.com. For Sales Within India: mktm@rajgrp.com / marketing_rl@rajgrp.com
Website: www.rajgrp.com
The information contained herein is, to our best knowledge, true and accurate, but all recommendations or suggestions are made without guarantee, since the conditions of use are beyond
our control. There is no implied warranty of merchantability or fitness for purpose of the product or products described herein. Determination of the suitability of the product for the
application contemplated by the user is the sole responsibility of the user. In submitting this information, no liability is assumed or license or other rights express or implied given with
respect to any existing or pending patent, patent applications or trademarks. The observance of all legal regulations and patents is the responsibility of the user.
200803 /ELECTROL / Uninhibited Page 2 of 2