Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 11 views

    Torque Specifications Description NM LB-FT

    Uploaded by

    Sofia Altuzarra
    The document provides specifications and instructions for removing and installing a driveshaft. It lists torque specifications for different components and outlines a 7 step process for removal that includes marking locations, loosening bolts, and avoiding pulling on tubes. Reinstallation is described as reversing the removal process.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Torque Specifications Description NM LB-FT

    Uploaded by

    Sofia Altuzarra
    11 views3 pages
    The document provides specifications and instructions for removing and installing a driveshaft. It lists torque specifications for different components and outlines a 7 step process for removal that includes marking locations, loosening bolts, and avoiding pulling on tubes. Reinstallation is described as reversing the removal process.

    Original Title

    205-01_Driveshaft

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides specifications and instructions for removing and installing a driveshaft. It lists torque specifications for different components and outlines a 7 step process for removal that includes marking locations, loosening bolts, and avoiding pulling on tubes. Reinstallation is described as reversing the removal process.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    11 views3 pages

    Torque Specifications Description NM LB-FT

    Uploaded by

    Sofia Altuzarra
    The document provides specifications and instructions for removing and installing a driveshaft. It lists torque specifications for different components and outlines a 7 step process for removal that includes marking locations, loosening bolts, and avoiding pulling on tubes. Reinstallation is described as reversing the removal process.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    SECTION 205-01: Driveshaft

    SPECIFICATIONS

    Torque Specifications

    Description Nm lb-ft
    Center bearing support bolts 25 18
    Center bearing support bracket bolts 25 18
    Front driveshaft-to-Power Transfer Unit (PTU) flange bolts 35 26
    Rear driveshaft-to-pinion flange bolts 35 26

    cardiagn.com
    SECTION 205-01: Driveshaft
    REMOVAL AND INSTALLATION

    Driveshaft

    Removal

    1. With the vehicle in NEUTRAL, position it on a hoist. Refer to Section 100-02 .

    2.

    cardiagn.com
    3. Discard the specified component. Follow local disposal regulations.
    • To install, tighten the new bolts to 35 Nm (26 lb-ft).

    4. NOTE: Do not remove driveshaft from the PTU flange by pulling on the driveshaft tube. Damage to
    the CV-joint can result.

    Marker. Center punch.


    5. Discard the specified component. Follow local disposal regulations.
    • To install, tighten the new bolts to 35 Nm (26 lb-ft).

    6. NOTE: Do not remove driveshaft from the pinion flange by pulling on the driveshaft tube. Damage
    to the CV-joint can result.

    Marker. Screwdriver.

    cardiagn.com
    7. • To install, tighten to 25 Nm (18 lb-ft).

    Installation

    1. NOTE: If a driveshaft is installed and driveshaft vibration is encountered after installation, index the
    driveshaft. Refer to Section 205-00 .

    To install, reverse the removal procedure.

    You might also like