205-02 - Rear Drive Axle Differential
205-02 - Rear Drive Axle Differential
205-02 - Rear Drive Axle Differential
SPECIFICATIONS
Material
Torque Specifications
cardiagn.com
Description Nm lb-ft
Differential housing-to-front insulator bracket bolts 90 66
Driveshaft-to-pinion flange bolts 35 26
Front insulator bracket-to-subframe bolts 90 66
Rear insulator bracket-to-subframe bolts 90 66
Side insulator bracket-to-rear axle differential bolts 90 66
SECTION 205-02: Rear Drive Axle/Differential
IN-VEHICLE REPAIR
Special Tool(s)
Handle
205-153 (T80T- 4000-W)
Removal
1. NOTE: There is no bearing for the stud shaft. There is a seal only.
cardiagn.com
Remove the halfshaft assembly. Refer to Section 205-05 .
2.
Installation
Axle Assembly
Removal
cardiagn.com
5. • To install, tighten to 90 Nm (66 lb-ft).
8.
Installation
cardiagn.com