Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
0% found this document useful (0 votes)
9 views1 page

Inspection & Testing Requirements Scope:: Test and Inspection Per

Download as pdf or txt
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 1

INSPECTION & TESTING REQUIREMENTS REVISION: 06/02/2013 CODE NUMBER: PAGE:

SAUDI ARAMCO FORM-175 REPLACES: 06/15/2007 IR172600 1 of 1


SCOPE: BATTERY CHARGER / RECTIFIER with Rating Less Than or equal to 100 ADC.

TEST AND INSPECTION PER: 17-SAMSS-514 & Specifications As Noted Below.

(1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)


(2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
(3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
0010
0010
*** X
Pre-Fabrication/Production Requirements
Type test
Specification Details / Notes:
The type test shall be conducted on each model on a one time
basis as per NEMA PE 5 or IEC 60146/60478

0020 *** In process inspection & test requirement Specification Details / Notes:
0030
0010
*** X
Final inspection & test requirements
Burn-in Type Test Certificate
Specification Details / Notes:
Provide minimum of 8 hours of continuous operation at full
rated capacity burn-in type test certificate

0020 X Factory Acceptance Test Shall be conducted to demonstrate performance and


functionality per specification.

0030 X Nameplate Per 17-SAMSS-514

0040 *** Additional/Supplemental Requirements Specification Details / Notes:

Notes:
(1) May only be waived by the responsible Saudi Aramco, ASC, or AOC Inspection Offices.
(2) See form SA175 - 000003 for instructions on using this form.

End of IR172600

You might also like