Series DM Gate Valves: Features and Benefits

Series DM Gate Valves
Series DM gate valves, the premier gate valve in the oil and gas drilling
market, are specifically engineered for the rigorous requirements of oilfield
applications. Designed for dependable, heavy-duty performance in abrasive
service conditions, Series DM gate valves are commonly selected for a
number of oilfield applications, including
■■ drilling standpipe manifold
■■ pump manifold block valves
■■ high-pressure mud mixing lines
■■ high-pressure drilling system block valves.
The Series DM gate valves are available in ASME Classes 600, 900, and
1500. They also are available in 5,000-psi gauge pressure and 7,500-psi
gauge pressure (not API monogrammed).
Features and benefits

Inline field repairability
The bonnet is easily removed for internal parts inspection, replacement,
or both without removing the valve from the line. This design simplicity
permits fast and easy service without the need for special tools.
Flexible trim offerings

Optional materials for stems, gates, seat inserts, and seat elastomers make
it easier to trim valves for a wide range of service conditions.
Automation
5-in [130-mm] 7,500-psi WP Series DM gate valve.
Automation is available for 5,000- and 7,500-psi pressure-rated valves.
Exclusive seats design for drop-tight sealing

The Series DM gate valve seats use an unique design to provide a drop-
tight shutoff in abrasive and erosive service.
The valves conform to

■■ American Bureau of Shipping (ABS)
■■ Det Norske Veritas (DNV)
■■ NACE MR0175.
Series DM 7500
The seat consists of two identical metal wear rings encapsulated in
elastomer to form a cylindrical shape with a gate slot and two round ports.
The closed gate bears on the downstream wear ring, and the elastomer
provides a drop-tight pressure-responsive seal around the port.
Series DM 5000, Class 600, 900, 1500

The cylindrical seat assembly fits into the machined body cavity and is
expanded outward toward the valve ports by the bonnet and spread ring in
the bottom of the seat. The expansion occurs when the bonnet is tightened
onto the body while engaging the seat pin extensions from both wear rings.
The spread ring ensures the seat elastomer presses uniformly against the
body bore. This design ensures that the seat seals tight against the body
and around each valve port. This design has proved to be effective even if
the gate and seat ring become scored or abraded during service. When it
comes time for maintenance, the seat’s single-piece design makes it easy
to pull out of the body for replacement.
5-in [130-mm] 5,000-psi WP Series DMA gate valve.
4
Series DM Gate Valves/Product Specifications
DM Series Pressure Classes and Sizes

Port Size, in [mm] Pressure Classes
600 900 1500 5000 7500
Full port (FP) 2 [50] ● ● ● ●
21/2 [65] ● ● ●
3 [80] ● ● ● ● ●
4 [100] ● ● ● ● ●
5 [125] ● ●
6 [150] ● ●
Reduced port 2 × 11/2 [50 × 40] ●
(RP) 21/2 × 2 [65 × 50] ●
3 × 2 [80 × 50] ●
4 × 3 [100 × 80] ● ●
5 × 4 [125 × 100] ● ●
6 × 4 [150 × 100] ●
6 × 5 [150 × 125] ● ●
8 × 6 [200 × 150] ●
Product Specifications
Series DM gate valve general technical information
Valve size designations and weld end dimensional information ■■ Group 2—Same as Group 1, except hydrostatic shell test—11,250 psi
All references to pipe size in this catalog are the nominal size. The actual for 3 min, drop to 0 psi, then 11,250 psi for 15 min. Test is charted.
OD and ID for various nominal sizes and schedules are tabulated below. Hydrostatic seat test—7,500 psi for 3 min, drop to 0 psi, 7,500 psi for
Weld end bodies are machined at each end to match the pipe OD and ID. 15 min, drop to 0 psi, then 300 psi for 5 min, each side. Test is charted.
Material traceability on body, bonnet, stem, and bolting. Impact tests
Nominal Size, OD ID at or below −50 degF [−46 degC] on body, bonnet, stem, and bolting.
in [mm] Sch. 40 Sch. 80 Sch. 160 XXH Surface nondestructive examination (NDE) on body, bonnet, and stem.
11/2 [40] 1.900 1.610 1.500 – – ■■ Group 3—Same as Group 2, plus volumetric NDE on body and bonnet.
2 [50] 2.375 2.067 1.939 1.687 1.503
21/2 [65] 2.875 2.469 2.323 2.125 1.771 Seat seal options
3 [80] 3.500 3.068 2.900 2.624 2.300 ■■ Buna-N (nitrile) is excellent for petroleum oil and gases, fuel oils, and
4 [100] 4.500 4.026 3.826 3.438 3.152 alcohols from –10 to 200 degF [–23 to 93 degC].
5 [125] 5.563 – 4.813 4.313 4.063 ■■ FKM is highly resistant to mineral acids and hydrocarbons, and is
6 [150] 6.625 6.065 5.761 5.187 4.897 serviceable from –10 to 400 degF [–23 to 204 degC]; not suitable
for steam.
Quality, inspections, and testing ■■ HNBR is formulated for use with synthetic and oil-based drilling mud
■■ The Cameron quality system is based on ISO 9000 and API Spec Q1 service from –20 to 250 degF [–29 to 121 degC].
requirements and is ISO 9001:2008 certified. Cameron monitors all
phases of valve production, from material receipt to final inspection, Ordering information
including liaising with third-party inspectors and certifying authorities.
■■ Give pipe size, pressure class, and end connection.
All gate-style DEMCO valves are hydrostatically tested; stem seal, body,
■■ Specify pressure class of flanged ends, raised face (RF), or ring type
and seat are inspected for zero leakage under pressure before being joint (RTJ).
released for shipment. Hydrotest specifications are based upon the ■■ For threaded ends, provide type of pipe:
latest-edition API Spec 6A testing requirements; Series DM 7500 Groups ●● nonupset tubing (TBG)
2 and 3 valves undergo additional test cycles, including low-pressure ●● long casing thread (LCSG)
seat tests prior to being released for shipment.
●● external upset tubing (UPTBG)
■■ Group 1—Basic valve. Hydrostatic shell test—11,250 psi for 3 min.
Hydrostatic seat test—7,500 psi for 3 min, each side. Material traceability ●● short casing thread (CSG).
on body and bonnet. ■■ For weld ends, give schedule of mating pipe.
5
Dimensions, Materials, and Parts List
Series DM gate valves—7,500-psi WP
2-in [50-mm] seat port
12
19
11
B 20
18
14
4
3 16 13 23
Dimensional Data and Weights

Dimension Valve Seat Port Size for 7,500-psi WP: 2 in [50 mm]
A, length, in [mm] Weld end 9.00 [229]
Flanged end, API length 20.50 [521]
Hammer union end 15.74 [400]
For flanged ends API ring number BX-152
Flange ID, in [mm] 2.00 [50]
Flange OD, in [mm] 7.88 [200]
Flange bolts, amount; in [mm] 8; 3/4 [19]
Weight, lbm [kg] Weld end 83 [38]
Flanged end 144 [65]
Hammer union end 101 [46]
Number of handle turns from open to closed 8.6
B, height, center to top (open), in [mm] 13.04 [331]
C, handle diameter, in [mm] 14.00 [356]

Series DM Gate Valves: Features and Benefits

Uploaded by

Copyright:

Available Formats

Series DM Gate Valves: Features and Benefits

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Series DM Gate Valves: Features and Benefits

Uploaded by

Copyright:

Available Formats

Series DM Gate Valves

Features and benefits

Flexible trim offerings

Exclusive seats design for drop-tight sealing

The valves conform to

Series DM 5000, Class 600, 900, 1500

DM Series Pressure Classes and Sizes

Dimensional Data and Weights

You might also like