INDUSTRIALAVON GAS GENERATOR

ILLUSTRATED PARTS CATALOGUE

INTRODUCTION

CONTENTS

Para

GENERAL INFORMATION 1

USING THIS IPC 2

CONTENTS 3

MATERIALS AND SYMBOLS 4

CONTENTS

1535-GAS
INTRODUCTION
May/00 Prelim 1/2
 INDUSTRIALAVON GAS GENERATOR
ILLUSTRATED PARTS CATALOGUE

INTRODUCTION AND CONTENTS

1. General Information

A. This Illustrated Parts Catalogue (IPC) is applicable to the

following Rolls-Royce Avon Industrial Gas Generators and
all sub-variants of them:

Mk.1535-161G
Mk.1535-162G
Mk.1535-170G
Mk.1535-171G

B. The purpose of this IPC is to assist users to identify

parts when ordering replacements and it is not approved for
any other purpose.

C. Only Rolls-Royce approved parts should be fitted to the

Avon Industrial Gas Generator. The use of apparently
similar parts, or those of unknown origin, may give rise to
hazardous operation and may lead to serious and expensive
failure of the gas generator in service.

D. Bolts, screws, nuts, other fasteners, and any locking

devices required must be used only in their specified
applications. The use of apparently similar items in an
incorrect application can again give rise to hazardous
operation, and may lead to serious and expensive failure of
the gas generator in service.

E. All enquiries relating to this IPC should be addressed to

Customer Support Department, Rolls-Royce Power Engineering plc,
Ansty, Coventry CV7 9JR, who will also deal with any
requests for additional copies of this IPC.

2. Using this IPC

A. A Numerical Parts List Index (NPLI) details part numbers

included in this IPC in alpha-numerical order. Against each
part number is shown the Chapter(s) in which that part
number will be found, together with a Figure Number-Figure
Item Number reference, to locate the part number within the
Chapter. Part numbers which do not have a Figure number
given against the Chapter number entry are not shown on the
illustration for that Chapter.

B. Parts having a limited gas generator applicability are

indicated by a code letter shown against them in the Usage
Code Column in the Chapter pages. Reference should be made
to the first page in each chapter for details of these
restricted applications.

INTRODUCTION
1535-GAS
May/00 Page 1
 INDUSTRIALAVON GAS GENERATOR
ILLUSTRATED PARTS CATALOGUE

C. The number off shown against an item indicates the quantity

required in the position shown and does not preclude the
recurrence of that item in other positions. In order to
assess whether or not the part recurs, reference should be
made to the Numerical Parts List Index.

D. Items which are not normally procurable carry the letters

'Ref' in the Unit per Assembly column.

E. Requirements that vary on engine build (such as adjusting

washers and bulk items) are shown as 'A/R' or 'AR',
denoting 'as required' in the Units per Assembly column.

F. Part numbers with the suffix A indicate that the item is an

assembly, or for a 'Special Spares Assembly' the suffix AS
is added. Parts which have lost their identify as a result
of being included into a permanent assembly are not listed.
The inclusion of a slash suffix, for example /1, to a part
number indicates a minor change only to that part number.

G. Abbreviations which may be used in this IPC are as follows:

A/R or AR - As required I.P. - Intermediate

A.R.S. - Avon repair pressure
scheme L.H. - Left-hand
Assy. - Assembly L.P. - Low pressure
Av - Average L.T. - Low tension
B.V.C.U. - Bleed valve M ) - Modification
control unit MOD.)
C/Bore - Counterbore MAX. - Maximum
Ch.hd. - Cheese head m.m - Millimetres
C.P. - Change N.G.V. - Nozzle guide
pressure vane
Csk.hed.) - Countersunk No./No's - Numbers
Csk.hd. ) head O/B - Overboard
c/w - Complete with O/dia. - Outside diameter
dia. - Diameter O/S - Oversize
F.C.O.C. - Fuel cooled P.M. - Pre-Modification
oil cooler Pr. - Pair
F.C.U. - Fuel control Ref.)
unit REF.) - Reference
H.E. - High energy RF )
Hex.hd. - Hexagon head R.H. - Right-hand
H.P. - High pressure R.P.M. - Revolutions per
i/dia. - Inside minute
diameter S.O.C. - Shut-off cock
I.G.V. - Intake guide Spec. - Specification
vane Sq. - Square
Vac. - Vacuum

INTRODUCTION
1535-GAS
Page 2 May/00
 INDUSTRIALAVON GAS GENERATOR
ILLUSTRATED PARTS CATALOGUE

3. Contents

A. The subjects within this IPC are set out in ascending

number order as detailed below, noting that information for
all the Chapters listed may not be applicable to one or
more of the gas generator variants covered by this IPC, and
will therefore not form part of the contents.

Chapter No. Subject

1-0 Gas Generator

1-0-0 Installation Fittings – Gas Generator Plant

1-0-3 Main Bearings

1-1 Air Intake Extension and Flare

1-2 Air Intake and Front Bearing Housing

1-3 Compressor Bleed Valves

1-4 Compressor Casings and Stators

(Up to and including intermediate
compressor casings, and stage 9 compressor
stator blades)

1-5 Compressor Rotors and Shafts

(Including stage 00 to stage 15 rotors, and
the front and rear compressor shafts)

1-6 Compressor Outlet Casing

(Including stage 10 to stage 14 compressor
stator blades and stage 15 outlet guide
vanes)

1-7 Internal Wheelcase and Centre Bearing

1-8 External Wheelcase, Sump and Filters

1-9 Drive – External Wheelcase and Governor

Pump

1-10 Oil Pumps

1-11 Drive – Starter

1-12 Nozzle Box

1-13 Rear Bearing Housing

1-14 Cooling Air Manifold (Rear Half)

INTRODUCTION
1535-GAS
May/00 Page 3
 INDUSTRIALAVON GAS GENERATOR
ILLUSTRATED PARTS CATALOGUE

Chapter No. Subject

1-15 Turbine Wheels and Shafts

1-16 Flame Tubes and Air Casing

1-17 Exhaust Unit

(Including exhaust unit heat shield where
applicable)

1-18 Starter Fairing

1-19 Oil Cooler

1-20 Governor Pump – Intake Guide Vanes Ram

1-21 Intake Guide Vanes Ram and Bleed Valves

Control Unit

1-22 Front Suspension

1-23 Low Tension (LT) Harness

1-24 Air Pipes and Fittings

1-25 Oil Pipes and Fittings

1-26 Viscosity Compensator – Intake Guide Vanes

Ram Governor Pump

1-27 P1 Air Transfer Valve

1-28 Not Used

1-29 Coupling Shaft to Gas Generator Brake

2-0 Fuel Systems

2-1 Fuel Burners

2-2 HP Fuel Pump or Hydraulic Pump

2-3 Fuel Control Systems

2-4 Fuel Filter

2-5 Fuel Pipes and Manifolds

2-6 Fuel Drain Valves

2-7 Pipes and Fittings – Hydraulic System

INTRODUCTION
1535-GAS
Page 4 May/00
 INDUSTRIALAVON GAS GENERATOR
ILLUSTRATED PARTS CATALOGUE

Chapter No. Subject

3-1 Anti-Icing Air Valve

3-2 Anti-Icing Air Pipes

4-1 Control Linkage

4-2 Not Used

4-3 Not Used

4-4 Temperature Signal Amplifier and Trimmer

Resistor

5-1 Fuel Indicating Units and Fittings

5-2 Oil Indicating Units and Fittings

5-3 Thermocouple and Harness

6-1 Exhaust Transition Section

6-2 Not Used

7-1 Starter

7-2 Starter Wiring

7-3 Igniter Plugs

7-4 High Energy Igniter Leads

7-5 Igniter Units

INTRODUCTION
1535-GAS
May/00 Page 5
 INDUSTRIAL AVON GAS GENERATOR
ILLUSTRATED PARTS CATALOGUE

4. Materials and Symbols

A. Below is listed in alpha-numerical order those

abbreviations that may be shown against a part number to
indicate the material (or main material) of which it is
made.

Symbol Material Symbol Material

or Code or Code

A Aluminium ABL High Speed Steel

A.Alloy Aluminium Alloy (18/14/1) - Vac.
A/BS ) High Carbon Chromium melted
A/BSL ) Steel ABM High Speed Steel
A/C Alum Casting Alloy (18/14/1) - Double
A/CHT Aluminium Casting Vac. melted
Alloy ABN ) High Carbon -
A/F Aluminium Forging ABP ) Chromium Steel
Alloy ABQ ) High Carbon -
A/F 99 Aluminium Alloy ABR ) Chromium Steel -
A/FDW ) Aluminium Forging ) Vac. melted
A/FG ) Alloy ABS ) High Carbon -
A/FLS Low Silicon ABT ) Chromium Steel -
Aluminium Alloy ) Double Vac. melted
A/FMS Aluminium Alloy ABU ) 3% Chromium -
A/FW Weldable Aluminium ABW ) Molybdenum Steel
Alloy ABX )
A/MN ) Manganese Aluminium ABY 3% Chromium -
A/MNS ) Sheet Molybdenum Steel -
A/MNQ Aluminium Manganese Vac. melted
Alloy ABZ Chromium -
A/R Aluminium Copper Molybdenum -
Alloy Vanadium Steel
A/RM 5% Magnesium Alloy ACA Chromium -
A/RS Duralumin Rivets Molybdenum -
A/W Weldable Soft Vanadium - Vac.
Aluminium Alloy melted
ABA ) Low Carbon - ACB 3% Nickel Steel
ABB ) Molybdenum Boron ACC 4.25% Nickel -
ABC ) Steel Chromium Steel
ABD ) ACD 4.25% Nickel -
ABE .4% - .5% Carbon Chromium - Vac.
Steel melted
ABF ) .1% Carbon Steel ACE ) Carbon Spring Steel
ABG ) ACF )
ABH .2% Carbon Steel ACG Chromium Molybdenum
ABJ 1.5% Nickel - Cast Iron
Chromium - ACH Cast Iron
Molybdenum Steel ACJ ) Chromium - Vanadium
ABK High Speed Steel ACK ) Steel
(18/14/1) ACL )

INTRODUCTION
1535-GAS
Page 6 May/00
 INDUSTRIALAVON GAS GENERATOR
ILLUSTRATED PARTS CATALOGUE

Symbol Material Symbol Material

or Code or Code

ACM 10% Tungsten - 3% D/M High Tensile Brass

Chromium Steel - DTD Defence Technical
Vac. Melted Directorate
ACP ) .3% Carbon Steel DURAL Aluminium Copper
AEM ) Alloy
AFM ) Nickel, Chromium, DURC Duralumin
AFQ ) Molybdenum Steel DXTM Dixtampo
ALBR Alum Brass Tube
ASG .3% Carbon Steel E/ORK )
ATN ) Chrome Molybdenum E/PVC ) Nitrile Rubber
AWY ) Steel E/TC )
E/XCF )
B ) Brass EAA Chromium - Nickel -
B/AF ) Tungsten Steel
B/BS 80/20 Brass Bar EAB Nickel - Manganese -
B/D Brass Tubes Chromium Steel
B/DS 70/30 Brass Sheet EAC Chromium - Nickel
and Strip (18/8) - Stabilised
B/SK Synthetic Rubber Steel
BS British Standard EAD ) Modified 12%
BSEM Bristol Siddeley EAE ) Chromium Steel
Engineering EAF Chromium - Nickel
Materials (18/8) - Stabilised
BZ ) Bronze Steel
BZ3AB ) EAG Austenitic Weldable
BZ/80 Complex Alum Bronze Creep Resisting
BZ/A Alum Bronze Cast Steel
BZ/AB Alum Bronze Forged EAH High Carbon
BZ/ADC Alum Bronze Die Cast Martinsitic Steel
BZ/AF Alum Bronze EAJ 12% Chromium Steel
BZ/CD Silicon Nickel EAK ) Modified 12%
Copper Alloy. EAL ) Chromium Steel
Drawn Bar EAM 12% Chromium Steel
BZ/CN Silicon - Nickel - EAN Chromium - Niobium -
Copper Alloy Creep Resisting -
BZ/G ) Gun Metal Ferritic Steel
BZ/PC ) Phosphor Bronze EAP ) Modified 12%
BZ/PD ) EAQ ) Chromium Steel -
) Vac. melted
C Copper EAR ) Austenitic Heat
C.130 ) EAS ) Resisting Steel -
C.242 ) Nickel Base Heat ) Vac. melted
C.263 ) Resisting EAT ) Nickel - Manganese -
EAU ) Chromium Steel
C.1023 Nickel Base - Heat EAV Medium Carbon - 12%
Resisting Chromium Steel
C.1047 Nickel Base - Heat EAW Chromium - Niobium -
Resisting Creep Resisting -
C.1405 Nickel Base - Heat Ferritic Steel
Resisting

INTRODUCTION
1535-GAS
May/00 Page 7
 INDUSTRIALAVON GAS GENERATOR
ILLUSTRATED PARTS CATALOGUE

Symbol Material Symbol Material

or Code or Code

EAX ) Creep Resisting - EBV Chromium - Nickel

EAY ) Ferritic Steel - (18/8) - Stabilised
) Vac. melted Steel
EAZ Medium Carbon - 12% EBW Hard Drawn -
Chromium Steel - Chromium - Nickel
Vac. melted (18/8) - Stabilised
EBA Chromium - Niobium - Steel
Creep Resisting - EBX Modified 12%
Ferritic Steel Chromium Steel
EBB Chromium - Niobium - EBZ F.S.T. Quality -
Creep Resisting - Staybright Sheet
Ferritic Steel - Deep Drawing
Vac. melted Quality
EBC 12% Chromium Steel - ECA )
Vac. melted ECC )
EBD Chromium - Niobium - ECD )
Creep Resisting - ECF ) Corrosion Resistant
Ferritic Steel ECG ) Steel
EBE Chromium - Niobium - ECH )
Creep Resisting - ECJ )
Ferritic Steel - ECL )
Vac. melted EDA ) Nickel – Chromium
EBF Creep Resisting - EDC ) Steel
Ferritic Steel EEN Chromium Steel
EBG ) Creep Resisting - EGL Nickel – Chromium
EBH ) Ferritic Steel - Steel
) Vac. melted ENZ Chromium Steel
EBJ Modified 12% EPB Chrome – Molybdenum
Chromium Steel - Steel
Vac. melted EPK.31 Nickel Base Alloy
EBK Chromium - Nickel EPT ) Nickel Chrome Steel
(18/8) - Stabilised EQJ )
Steel ETC Nickel – Chrome,
EBL Modified 12% Molybdenum Steel
Chromium Steel ETN Chrome, Molybdenum
EBM Chromium - Nickel Steel
(18/8) - Stabilised ETS Nickel – Chrome,
Steel Molybdenum Steel
EBN Austenitic Weldable EX.443 Aluminium Forging
Creep Resisting Alloy
Steel EXP.99 Aluminium Casting
EBP Modified 12% Alloy
Chromium Steel F/E Neoprene Covered
EBQ 12% Chromium Steel Double Layer (45o)
EBR Austenitic - Fortisan
Chromium - Nickel F/FN Nitrile Rubber
(12.5/12.5) Steel
EBS ) Chromium - Nickel H/SG Glass Fibre
EBT ) (18/8) - Stabilised Reinforced Silicone
) Steel Resin
EBU 12% Chromium Steel

INTRODUCTION
1535-GAS
Page 8 May/00
 INDUSTRIAL AVON GAS GENERATOR
ILLUSTRATED PARTS CATALOGUE

Symbol Material Symbol Material

or Code or Code

H46V ) Ferritic Creep - L/SA Silicone Bonded

H53/DV ) Resisting Steel Asbestos Fleece
H53/V ) (Ferrobestos EF4)
Haynes 25 Cobalt Base - Wear L/SG Silicone Bonded
and Heat Resisting Glass Fabric
Alloy (Ashlam)
HYKR Hykro Steel LAA )
LAB )
I/C Cast Irons LAC ) Aluminium Casting
I/CHD High Duty Cast Iron LAD ) Alloy
I/CNM Heat Treated Cast LAE )
Iron LAF )
I/CPR Cast Iron LAG ) Low Silicon -
I/CRM Chromium Molybdenum LAH ) Aluminium Forging
Cast Iron LAJ ) Alloy
I/SG ) Spheroidal Graphite LAK ) Aluminium Forging
I/SGM ) Cast Iron LAL ) Alloy
LAM 2.25% Magnesium -
J.2 Compressed Asbestos Aluminium Alloy
Fibre Rubber Bonded LAN Aluminium Forging
J.4 Wire Reinforced Alloy
Compressed Asbestos LAP ) Aluminium Alloy
Fibre, Rubber LAQ )
Bonded LAR Aluminium -
J.5 Compressed Asbestos Manganese Alloy
Fibre Synthetic LAS Aluminium Coated
Rubber Bonded Duralumin
LAT Aluminium - Copper
KAA Magnesium - Alloy
Zirconium Alloy LAU 99% Aluminium
KAB Magnesium - Silver - LAW Aluminium Alloy
Zirconium Alloy LAX 99% Aluminium
KAC 6% Aluminium - LAY Aluminium - Copper -
Magnesium Alloy Magnesium Alloy
KAD ) Magnesium Alloy LBA Aluminium Sheet
KAE ) (Soft)
KAF 6% Aluminium -
Magnesium - Zinc
Alloy

L/EG Glass Fabric

Reinforced Epoxy
Resin Material
L/PA Phenolic Bonded
Asbestos Fleece
(Ferrobestos EF)
L/PC Phenolic Bonded
Cotton Fabric
(Tufnol Corp)
L/PN Nylon Reinfored
Phenolic Board

INTRODUCTION
1535-GAS
May/00 Page 9
 INDUSTRIAL AVON GAS GENERATOR
ILLUSTRATED PARTS CATALOGUE

Symbol Material Symbol Material

or Code or Code

LBP ) N.100 )
LBV ) Aluminium Alloy - N.105 )
LCC ) General Application N.107 ) Nickel Base Heat
LCK ) N.108 ) Resisting Alloy
LM ) N.115 )
L.T.1 ) N.118 )
L.T.2 ) N.901 )
L.T.4 ) Lead Bronze NCO 901 Nickel - Chromium -
L.T.8 ) Iron - Heat
L.T.10 ) Resisting Alloy -
Vac.
M/SR-B Magnesium Silver N.M.C. Nickel Manganese
Zirconium Alloy Chrome Steel
M/ZRE )
M/ZT 1 ) PAA ) Phosphor Bronze
M/ZTY ) Magnesium Alloy PAB )
M/ZW ) PAC Aluminium Bronze
MG/B ) Aluminium Magnesium PAD Hot Forging Brass
MG/F ) Alloy PAE Copper - Nickel -
MG/MN Manganese Magnesium Silicon Alloy
Sheet PAF ) Phosphor Bronze
MG/T Aluminium Magnesium PAG )
Alloy PAH Copper
MONL Monel Metal PAJ ) Brass
(not to be used PAK )
above 300 deg.C.) PAL )
Morganite Carbon PAM ) Copper Alloy
MSRR Material PAN )
Specification PE/DCR)
Rolls-Royce PE/EK ) Nitrile Rubber
PE/FK )
N/GP Neoprene PE/G Synthetic Rubber
N/PK.31 Nickel Base Heat Polymercaptain
Resisting Alloy Compound
N/R 45% Nickel Alloy PE/OZR Nitrile Rubber
(not to be used PE.10 Nickel - Chromium -
above 300 deg.C.) Heat Resisting
N/SLD 15% Nickel Silver Alloy
Sheet P.T.F.E. Polytetrafluore-
N.75 ) thylene
N.80A ) Nickel Base Heat
N.80S ) Resisting Alloy QAA )
N.90 ) QAB ) Nickel Base - Heat
N.90S ) QAC ) Resisting Alloy
QAD )
QAE )

INTRODUCTION
1535-GAS
Page 10 May/00
 INDUSTRIALAVON GAS GENERATOR
ILLUSTRATED PARTS CATALOGUE

Symbol Material Symbol Material

or Code or Code

QAF Nickel - Chromium - QBM ) Nickel - Chromium -

Heat Resisting QBN ) Cobalt - Heat
Alloy QBP ) Resisting Alloy
QAG ) Nickel Base - Heat QBQ )
QAH ) Resisting Alloy QBR Nickel - Chromium -
QAJ ) Nickel - Chromium Cobalt - Heat
QAK ) (80/20) - Heat Resisting Alloy -
QAL ) Resisting Alloy Vac. melted
QAM ) Commercially Pure QBS Nickel Base - Heat
QAN ) Nickel Resisting Alloy
QAP Cobalt Base - Wear QBT Nickel - Chromium
and Heat Resisting (80/20) - Heat
Alloy Resisting Alloy
QAQ Cobalt Base - Wear QBU ) Nickel - Chromium -
Resisting Alloy QBV ) Cobalt - Heat
QAR Nickel Base - Heat QBW ) Resisting Alloy
Resisting Alloy QBX )
QAS ) Nickel - Chromium QBY Nickel - Chromium -
QAT ) (80/20) - Heat Cobalt - Heat
) Resisting Alloy Resisting Alloy -
QAU Nickel Base - Heat Vac. melted
Resisting Alloy QBZ Nickel Base - Heat
QAV ) Nickel - Chromium Resisting Alloy -
QAW ) (80/20) - Heat Vac. melted
) Resisting Alloy QCA Stellite Grade 1
QAX ) Nickel Base - Heat QCB Stellite Grade 4
QAY ) Resisting Alloy QCC Stellite Grade 6
QAZ ) Nickel - Chromium QCD Stellite Grade 8
QBA ) (18/20) - Heat QCE Stellite Grade 12
) Resisting Alloy QCF Cobalt Base - Heat
QBB ) Nickel - Chromium Resisting Alloy
QBC ) Cobalt - Heat QCG Nickel Base - Heat
QBD ) Resisting Alloy Resisting Alloy
QBE Nickel - Chromium QCH ) Nickel - Chromium -
(18/20) - Heat QCJ ) Cobalt - Heat
Resisting Alloy ) Resisting Alloy
QBF ) Nickel - Chromium - QCK Cobalt Base - Wear
QBG ) Iron Heat Resisting and Heat Resisting
QGH ) Alloy - Vac. melted Alloy
QBJ Nickel - Chromium - QCL Nickel - Chromium -
Cobalt - Heat Iron - Heat
Resisting Alloy - Resisting Alloy -
Vac. refined Vac. melted
QBK Nickel - Chromium - QCM ) Nickel - Chromium -
Iron - Heat QCN ) Cobalt - Heat
Resisting Alloy - ) Resisting Alloy
Vac. melted QCP ) Nickel Base - Heat
QBL Nickel - Chromium QCR ) Resisting Alloy
(80/20) - Heat QCS )
Resisting Alloy QCT Nickel Base Heat
Resisting Alloy

INTRODUCTION
1535-GAS
May/00 Page 11
 INDUSTRIALAVON GAS GENERATOR
ILLUSTRATED PARTS CATALOGUE

Symbol Material Symbol Material

or Code or Code

QCU Nickel Base Heat S/DHR Medium Carbon Hot

Resisting Alloy Rolled Steel Tube
QCW Cobalt Base - Wear S/DS Low Carbon Steel
and Heat Resisting Sheet
Alloy S/FH Stainless Steel
QCX Nickel Base Heat Springs
Resisting Alloy S/HBH 3% Chromium
QZD ) Nickel Base Alloy Molybdenum Steel
QZK ) S/HC 6% Carbon Chromium
Steel
R/G Natural Rubber S/HCS High Carbon
REX448 12% Chrome Steel Stainless Steel
R.R.50 Aluminium Casting S/HHV 3% Chromium
Alloy Molybdenum Steel
R.R.82 Aluminium Tube S/HRI High Carbon Chromium
Medium Strength Cast Steel
Corrosion S/HRC Chromium Nickel
Resisting Tungsten Steel
S/HSW Tungsten Chromium
S.80 Stainless 16% Vanadium Steel
Chromium Steel S/LC .1% Carbon Steel
S/607 Weldable 12% S/M .25% - .25% Carbon
Chromium Steel Steel
S/ABV Nickel Chromium S/MC .4% - .5% Carbon
Heat Resisting Steel
Steel S/MCR Carbon Steel High
S/ACR Austenitic Weldable Tensile Sheet
Creep Resisting S/MD Medium Carbon Steel
Steel Sheet
S/ANB Chromium Nickel S/ML .2% Carbon Steel
(18/8) Steel S/MN .25% - .35% Carbon
S/BT Chrome Molybdenum Steel
Steel Tube S/MOB Low Carbon
S/C .2% Carbon Steel Molybdenum Boron
S/CMV 3% Chromium Steel
Molybdenum Vanadium S/MX .3% Carbon Steel
Steel S/N 3.5% Nickel Steel
S/CNT Chromium Nickel S/NC ) High Nickel Chromium
(18/8) Steel S/NCV ) Steel
S/CRI 20% Chrome Iron S/ND Chromium Molybdenum
S/CS ) Carbon Spring Steel Steel
S/CSL ) S/NM Nickel Manganese
S/CV Chrome Vanadium Steel
Steel S/NMC Nickel Manganese
S/CVV Chromium - Chrome Steel
Molybdenum - S/NMX Nickel Manganese
Vanadium - Vac. Chrome Cast Steel
melted S/NTV ) 1.5% Nickel Chromium
S/D 'A' or 'B' Quality S/NTVL ) Steel
Steel Tube S/S 12% Chromium Steel

INTRODUCTION
1535-GAS
Page 12 May/00
 INDUSTRIALAVON GAS GENERATOR
ILLUSTRATED PARTS CATALOGUE

Symbol Material Symbol Material

or Code or Code

S/SAV Ferritic Creep S/XAV ) High Carbon Chromium

Resisting Steel S/XCR ) Steel
S/SB Stainless Steel S/XDM )
(12% Chrome) S/Z Low Carbon Steel -
S/SCC Stainless 12% Case Hardening Low
Chromium Steel Carbon Steel
S/SCO Ferritic Chromium S/ZAV ) 4.25% Nickel Chrome
Resisting Steel S/ZDM ) Steel
S/SCR High Proof Stress S/ZNC )
18/8 Type Steel, S/ZLN 3.5% Nickel Chrome
Sheet and Strip Molybdenum Steel
S/SDD Staybrite Sheet S/ZNH Nickel Chrome Steel
S/SDV Chromium Cobalt S/ZNM 3.5% Nickel Chrome
Niobium Creep Molybdenum Case
Resisting Ferritic Hardening Steel
Stainless Steel SE/CH )
S/SF ) Free Machining SE/DT ) Silicone Rubber
S/SFM ) Stainless Steel SE/DTA )
S/SIC Stainless 12% SE/LH )
Chromium Steel SE/F Silicone Rubber
S/SJ2 ) Modified 12% P.T.F.E. Mix
S/SJV ) Chromium Steel SE/G Silicone/Glass Fibre
S/SJW ) SE/MP Silicone Rubber
S/SL Low Carbon 12% (Sponge)
Chromium Steel STAL 4% Silicon Iron
S/SNV Chrome Molybdenum Staybrite Staybrite Sheet
Niobium Vanadium Half-Hard
Steel F.S.T. Quality
S/SPC ) Medium Carbon 12% Staybrite Sheet
S/SS ) Chromium Steel Deep
S/SSV 12% Chrome Steel Drawing Quality
S/ST Chromium Niobium STBR Staybrite Wire
Steel Stellite Nickel Cobalt Alloy
S/STC Chromium Niobium
Vanadium Molybdenum T/AM 2% A1 - 2% Mn -
Casting Alloy Titanium Alloy
S/STH ) Chromium Niobium T/AS 5% A1 - 2.5% Sn
S/STM ) Creep Resisting T/AV 6% A1 - 4% -
S/STV ) Steel Titanium Alloy
S/SVM Modified 12%
Chromium Steel
S/SVP Medium Carbon 12%
Chromium Steel
S/SW Chromium Nickel
Steel
S/WAV Tungsten Chromium
Vanadium Steel
S/WCV 14-4-1 Tungsten Wire
S/WDM Tungsten Chromium
Vanadium Steel

INTRODUCTION
1535-GAS
May/00 Page 13
 INDUSTRIAL AVON GAS GENERATOR
ILLUSTRATED PARTS CATALOGUE

Symbol Material Symbol Material

or Code or Code

T/CP Commercially Pure WAR Fluorocarbon

Titanium WBC Asbestos/Rubber
T/CU 2% Cu - Titanium Welvic Plasticised P.V.C.
Alloy Compound
T/SW ) Sn-Zr-A1 - Titanium WM/T White Metal Tin
T/SZ ) Alloy Alloy
TAA Commercially Pure
Titanium YBG Glass/Nitrile Rubber
TAB 2% Cu - Titanium Gasket
Alloy YPB Stainless Steel/
TAC Titanium - Graphite Gasket
Aluminium -
Zirconium -
Tunsten Alloy
TAD 2% A1 - 2% Mn -
Titanium Alloy
TAE Sn-Zr-A1 - Titanium
Alloy
TAF 6% A1-4% V -
Titanium Alloy
TAG Titanium -
Aluminium -
Zirconium -
Tungsten Alloy
TAH Sn-Zr-A1 - Titanium
Alloy
TAJ Titanium -
Aluminium -
Zirconium -
Tungsten Alloy
TAK ) Commercially Pure
TAL ) Titanium
TAM )
TAN ) 2% Cu - Titanium
TAP ) Alloy
TAQ Commercially Pure
Titanium
TAR High Strength
Titanium Alloy
TAS Commercially Pure
Titanium
TAW Titanium Alloy

VAX Ferrobestos
VE/FH )
VE/HT ) Viton Rubber
VE/KR )
VM/L White Metal Lead
Alloy

INTRODUCTION
1535-GAS
Page 14 May/00