PTW JHA Prayer Garment Hanging Rack Installation
PTW JHA Prayer Garment Hanging Rack Installation
PTW JHA Prayer Garment Hanging Rack Installation
Date: 5 October 2021 Will the work involve any of the activities below? (Circle that apply)
If ‘YES’ a Permit must be obtained
Prepared By: Rannie Hot work and / Work in Confined space entry, Excavation >/= 1.2
Hazardous areas >/= 1.5 meter meter
Company: HI TECH ENGINEERING SDN BHD Inerting or Gas Freeing Work on Flammable Live Electrical Work/
Gas Systems LOTO
Department / Address: NO. 10G, LEBUH BENDAHARA 4, Asbestos Work / Working Explosive Blasting/ Other (specify):
OFF JLN RAJA NONG, 41200 KLANG, SELANGOR at Height (1.8 Meter) Radiation Exposure
JHA Reference No.: HI Tech (S/B) 0029/2021 JHA Review No.: Hi Tech (S/B) 0029/2021
JHA Review Date: 5/10/21
Predetermined JHA shall be verified and reviewed on site every day before performing the work
Step Job Step Job Step Hazard Job Step Control Tick
No
1 Barricading work area Struck by equipment or material Placement of warning signage (safety cone)
2 Moving materials manually to the Body sprains and strains from lifting - use correct lifting techniques
work area materials
- get assistance when lifting heavy loads
3 Drill hole in wall Injury from flying debris and dust - wear safety goggles & face mask
- be aware of people working nearby
Injuries from drilling - never carry power tools with the trigger depressed
- keep hands away from the immediate work area
- disconnect tools from the power source before
making adjustments or carrying out servicing
- wear safety goggles
- keep a firm grip while using tools
Step Job Step Job Step Hazard Job Step Control Tick
No
4 Installing new hanging rack Strains and sprains - use correct lifting techniques
- get assistance when lifting heavy loads
Injury from flying debris and dust - wear safety goggles & face mask
- be aware of people working nearby
Injuries from power tools - never carry power tools with the trigger depressed
- keep hands away from the immediate work area
- disconnect tools from the power source before
making adjustments or carrying out servicing
- wear safety goggles
- keep a firm grip while using tools
Personal Protective Equipment (PPE) appropriate to the task at hand shall be worn / used at all times.
Tick box any PPE that applies to this job.
/ / /
List required equipment / tools (e.g. fire extinguisher, barricading / signs, hand tools, mechanical tools, plant etc.):
a) Hand Drill (battery type)
b)
c)
The work crew acknowledges that they understand and will comply with the precautions listed above