How To Prepare Herbal Soap: Utensils
How To Prepare Herbal Soap: Utensils
How To Prepare Herbal Soap: Utensils
Utensils:
* Plastic pail
* Wooden ladle or bamboo stick
* Glass or cup
* Mortar and pestle
* Cheese cloth or strainer
* Knife
* Chopping board
* Cooking pot (preferably made of clay, enamel, stainless or glass)
* Stove
* Plastic molders
Materials:
* 1 glass Caustic Soda (NaOH)
* 3 glasses Akapulko or Guava decoction, cooled
* 5 glasses cooking oil
* coloring powder (optional)
Procedure:
1. Prepare the materials and the utensils needed.
2. Measure 1 glass of caustic soda and 3 glasses of Akapulko or Guava
decoction and pour into a plastic pail.
3. Mix well by stirring continuously using a wooden ladle or bamboo stick. Use
only one direction in mixing the mixture. Stir until the caustic soda is
dissolved.
4. Pour 5 glasses cooking oil into the mixture.
5. Continue stirring until a consistency of a condensed milk is achieved.
6. Pour the soap mixture into desired plastic molders. Set aside and let it cool
to harden.
7. After 4-5 hours, remove the soap from the molder.
8. Allow 30 days of ageing before packing. Label the soaps.
Indications:
* Akapulko leaves – anti-fungal
* Guava leaves – antiseptic for wounds
Procedure:
1. Prepare the materials and the utensils needed.
2. Measure 1 glass of caustic soda and 3 glasses of water and pour into a
plastic pail.
3. Mix well by stirring continuously using a wooden ladle or bamboo stick. Use
only one direction in mixing the mixture. Stir until the caustic soda is
dissolved.
4. Pour 5 glasses cooking oil into the mixture.
5. Continue stirring until a consistency of a condensed milk is achieved and
add 1/2 glass of juice or extract.
6. Pour the soap mixture into desired plastic molders. Set aside and let it cool
to harden.
7. After 4-5 hours, remove the soap from the molder.
8. Allow 30 days of ageing before packing. Label the soaps.
Indications:
* Kamias – fruit extract or juice (bleaching soap)
* Calamansi – fruit extract or juice (bleaching soap)
* Cucumber – fruit extract or juice (moisturizer)
* Papaya – extract from fresh leaves (bleaching/moisturizer)
* Radish – extract from the stem (moisturizer)
Reminder:
* Caustic Soda can harm the skin upon contact. Wash immediately with
vinegar or anything sour and then wash it with soap and water.
* Caustic Soda is harmful to health and so, make the necessary precaution.
Use mask and gloves to protect your body.
Carrot Soap is easy to make. The Beta Carotene in carrots makes it very good
for your skin, the lather is lovely and creamy, and the orange colour of the
soap itself is beautiful.
Carrot Castile Soap
Ingredients:
1 cup carrot juice;
5 tablespoons lye;
2 cups olive oil 1/2 cup canola oil;
(optional) tiny dried dice of carrot. Cut it as small as possible. When dry it
should be like sand grains. Ann Beck’s Castile Carrot Soap
NOTES:
It’s very important to use rubber gloves and eye protection when using lye. One can
hand mix the soap, but it’s far simpler to use a food processor. The word “trace”
means if you drip some soap from a spoon onto the surface of the batch, it leaves a
faint mark. Tracing is less critical if the soap is made in the processor. With
processor soap, the batch should be the consistency of whipping cream.
Hand mixed soap can separate and take up to two hours or even more of stirring to
achieve trace. Soap must be poured as soon as it has traced. it sets up very quickly.
Never use aluminum utensils or molds. Lye reacts badly with it. stainless steel is fine,
as is plastic. Take care not to allow lye grains to touch Formica countertops
(worktops). It will discolor it. It’s best to measure the lye with the container in the
sink.
Method:
1.) measure the carrot juice and place it into a Pyrex cup, of at least two cups
capacity. Place the cup into a sink.
2.) mix the two oils together and barely heat them to 110 degrees F.
3.) Carefully measure the lye and set aside in a glass.
4.) Pour the lye into the carrot juice and stir with a wooden utensil, like a
chopstick or a bamboo skewer, until the lye dissolves. THE liquid/lye
combination will have a chemical reaction and will heat up to about 180
degrees F. EVENTUALLY the juice/lye combination needs to cool to 110
degrees F, which is just barely discernible to your wrist. YOU can use a
thermometer, of course.
5.) when the oil and the lye mixture are both at about 110, pour the oils into
the food processor and add the lye mixture. Process until trace has occurred.
6.) have your molds arranged on a newspaper covered cookie sheet. Pour the
soap into the molds. Cover the molds with lids or with plastic wrap, taking care
not to have the lids or wrap touch the soap.
7.) Put the soap batch in a draftless spot and cover it with a towel to protect
the heat that will occur as the saponification process (the chemical change
that creates soap) proceeds. Allow the batch to remain covered until it has
cooled, usually overnight.
At this point, you’ll do your clean up. always protect your eyes and hands
during this phase. it’s best to wash everything in the sink and again in the
dishwasher. raw soap would take the hide off of a rhinoceros.
8.) Uncover the soap, remove the plastic or the lids, and allow the soap to
remain in the molds for (about) 2 days, or until it looks like it is pulling away
from the sides of the molds.
9.) unmold the soap, lay it on pencils or chopsticks so that the air can circulate
around it. It must cure for a month before use.
1.) Place the carrot juice into a large saucepan and bring to a boil. Using a
coffee filter, strain the liquid away from the bright orange “foam”. Reserve the
foam and add it to distilled water to make one cup of liquid.
2.) Follow the rest of the instructions in the above Castile recipe.
Sources: doh.gov.ph, carrotmuseum.co.uk
Photo: sense-uallsecrets.com