Product Information

High
Performance
Building
Dow Corning® 3362 HD Insulating
Glass Sealant
FEATURES & BENEFITS Two-part silicone sealant for use as secondary sealant in insulating
 When used correctly, glass units.
manufactured dual sealed
insulating glass units meet EN1279 APPLICATIONS
and CEKAL requirements  Dow Corning® 3362 HD Insulating Glass Sealant is intended for use as a
 Outstanding adhesion to a wide secondary sealant in a dual sealed insulating glass unit.
range of substrates including  The high performance features incorporated into this product make it
coated and reflective glasses, especially suitable for the following applications:
aluminum and steel spacers, and a - Insulating glass units for residential and commercial use.
variety of plastics - Insulating glass units with high levels of UV exposure
 Structural capability as secondary (free edge, green house, etc.).
sealant for insulating glass units - Insulating glass units incorporating specialty glass types.
used in structural glazing - Insulating glass units where high heat or humidity may be encountered.
 CE Marked according to - Insulating glass in cold climates.
ETAG 002 - Insulating glass units used in structural glazing.
 Meets sealant requirements  Insulating glass units where a high modulus secondary sealant is required, e.g.
according to EN 1279 parts 4 and 6 to limit stress onto the primary sealant for noble gas-filled insulating glazing
and EN 13022 units.
 Low water absorption
 Excellent temperature stability: TYPICAL PROPERTIES
-50°C to 150°C Specification Writers: These values are not intended for use in preparing
 Very high modulus which limits specifications. Please contact your local Dow Corning sales office or your Global
the stress on the primary sealant Dow Corning Connection before writing specifications on this product.
and makes it particularly suited for
gas-filled insulating glazing units Test* Property Unit Result
 Non-corrosive cure Dow Corning 3362 HD Base: as
 Fast curing time supplied
 Outstanding resistance to ozone Color and consistency Viscous paste
and ultraviolet (UV) radiation Specific gravity 1.54
 Stable viscosity for A and B Viscosity (60s-1) Pa.s 55.0
components, no heating required Curing agent: as supplied
Color and consistency Thick black paste
Specific gravity 1.05
Viscosity (60s-1) Pa.s 7.5
As mixed
Color and consistency Black non-slump
paste
Working time
(25°C, 50% R.H.) minutes 5 to 10
Snap time
(25°C, 50% R.H.) minutes 35 to 45
Specific gravity 1.44
Corrosiveness Non-corrosive
ISO 8339 Tensile strength MPa 1.0
ISO 8339 Elongation at break % 30
EN 1279-6 Durometer hardness, Shore A 55
 TYPICAL PROPERTIES (continued)

Test* Property Unit Result

ETAG 002 Design stress in tension MPa 0.14
Design stress in dynamic shear MPa 0.11
Elastic modulus in tension or MPa 4.8
compression
EN 1279-4 Water vapor permeability g/m2/24h 15.4
(2.0mm film)
annex C
DIN Thermal conductivity W/(m.K) 0.26
52612
*
ISO: International Standards Organization.
EN: European Norm.
ETAG: European Technical Agreement Guidelines.
DIN: Deutsche Industrie Norm.

DESCRIPTION HOW TO USE dissolves cured silicone sealant and

Dow Corning 3362 HD Insulating Mixing and dispensing instructions provides optimum cleaning
Glass Sealant has been extensively Dow Corning 3362 HD Insulating performance.
tested under different type of glass Glass Sealant should be mixed in a
and conditions (air permeability, gas, ratio of 10:1 base to curing agent by TECHNICAL SERVICES
etc.). weight. At this mix ratio, the sealant Dow Corning provides
typically exhibits a working time of comprehensive technical service as
For further information please contact 5-10 minutes and allows units to be part of customer support to ensure the
our Technical services department. handled within two hours. Slight optimal performance of your
variations in mixing ratio can be insulated glass design. This includes
TECHNICAL tolerated, but these should not exceed dispensing equipment recommenda-
12:1 to 9:1 by weight to ensure tions, as well as sealant compatibility
SPECIFICATIONS AND minimum properties are obtained. testing with all your chosen insulated
STANDARDS glass unit components. For structural
Dow Corning 3362 HD Insulating The sealant is compatible with most of glazing applications, special unit
Glass Sealant is recommended for Dow Corning® Neutral Curing design should be reviewed on a
use as secondary seal in gas-filled Sealants. Please contact our Technical project basis by Dow Corning
insulating glass units meeting Services Department for more technical service staff.
requirements according to EN1279 in information.
an IG system. It is suitable for double Consult Dow Corning's Technical
and triple IG. As valid for any other To obtain the best mechanical Services departments for further
technology, a proper application and properties from Dow Corning 3362 advice on specific applications:
fabrication of the Insulating glass unit HD Insulating Sealant it is
is required recommended that the base and curing Your Dow Corning contact details
agent are thoroughly mixed using an (e-mails):
Dow Corning 3362 HD sealant has airless mixing system found on most
the CE Mark according to ETAG existing commercially available two-
002. The product also meets sealant Technical inquiries:
part silicone dispensing machines. eutech.info@dowcorning.com
requirement according to EN1279
parts 4 and 6.
Equipment cleaning Marketing:
When not being used it is construction.marketing@
Dow Corning 3362 HD sealant has the
recommended that the dispensing dowcorning.com
SNJF Vi-VEC label.
equipment be purged either with the
uncatalyzed base, or flushed with a
Quality Bond:
suitable solvent such as
qualitybond@dowcorning.com
Dow Corning® 3522 Concentrated
Cleaning Solvent. If cured sealant has
built up inside the equipment it is EHS inquiries:
recommended to flush the equipment europe.ehs@dowcorning.com
for the appropriate time with
Dow Corning 3522 Concentrated Reach inquiries:
Cleaning Solvent. This solvent reachsupport@dowcorning.com
Dow Corning is a registered trademark of Dow Corning Corporation.
We help you invent the future. is a trademark of Dow Corning Corporation.
2013, October 2 XIAMETER is a registered trademark of Dow Corning Corporation.
Form No. 62-1635D-01 © 2011 - 2013 Dow Corning Corporation. All rights reserved.
2
Your Dow Corning Construction PACKAGING intended end use. Suggestions of use
contact details (phone): INFORMATION shall not be taken as inducements to
Toll Free Numbers: Lot matching of Base and Curing infringe any patent.
From Belgium +0800 80 522 Agent is not required.
From France +0805 54 04 39 Dow Corning’s sole warranty is that
From Germany +0800 52 50 258 our products will meet the sales
Dow Corning 3362 HD Insulating
From Italy +800 92 83 30 specifications in effect at the time of
Glass Base is available in 250kg
From Spain +900 813161 shipment.
drums and 20 liter pails.
From United Kingdom Dow Corning® 3362 HD Insulating
+0800 9172 071 Your exclusive remedy for breach of
Glass Catalyst is available in 25kg
pails. such warranty is limited to refund of
All other countries: purchase price or replacement of any
For English +32 64 51 11 59 product shown to be other than as
LIMITATIONS warranted.
For French +32 64 51 11 59
The sealant cannot be used for
For German +49 611 237503
structural glazing of glass units onto a
For Italian +32 64 51 11 73 DOW CORNING SPECIFICALLY
metal frame. Dow Corning® 993
For Spanish +32 64 51 11 66 DISCLAIMS ANY OTHER
Structural Glazing Sealant is the
For Russian +7 495 725 43 19 EXPRESS OR IMPLIED
recommended product for that
WARRANTY OF FITNESS FOR A
application.
Fax number from all countries: +32 PARTICULAR PURPOSE OR
64 88 86 86 MERCHANTABILITY.
Please contact Dow Corning to get the
proper glazing recommendations when
HANDLING DOW CORNING DISCLAIMS
use of Coated Glass.
LIABILITY FOR ANY
PRECAUTIONS INCIDENTAL OR
PRODUCT SAFETY This product is neither tested nor CONSEQUENTIAL DAMAGES.
INFORMATION REQUIRED FOR represented as suitable for medical or
SAFE USE IS NOT INCLUDED IN pharmaceutical uses. We help you invent the future.™
THIS DOCUMENT. BEFORE
HANDLING, READ PRODUCT HEALTH AND dowcorning.com
AND MATERIAL SAFETY DATA
SHEETS AND CONTAINER
ENVIRONMENTAL
INFORMATION Figure 1: Typical section of a dual
LABELS FOR SAFE USE,
To support Customers in their product sealed insulating glass unit.
PHYSICAL AND HEALTH
HAZARD INFORMATION. THE safety needs, Dow Corning has an
MATERIAL SAFETY DATA extensive Product Stewardship
SHEET IS AVAILABLE ON THE organization and a team of Product
DOW CORNING WEB SITE AT Safety and Regulatory Compliance
DOW CORNING.COM, OR FROM (PS&RC) specialists available in each
YOUR DOW CORNING SALES area.
APPLICATION ENGINEER, OR
DISTRIBUTOR, OR BY CALLING For further information, please see our
DOW CORNING CUSTOMER website, dowcorning.com or consult
SERVICE. your local Dow Corning
representative.
USABLE LIFE AND
LIMITED WARRANTY
STORAGE
When stored at or below 30°C, INFORMATION – PLEASE
Legend
Dow Corning 3362 HD Insulating READ CAREFULLY 1. Secondary seal (Dow Corning 3362
Glass Curing Agent has a usable life The information contained herein is Insulating Glass Sealant)
of 14 months from the date of offered in good faith and is believed to 2. Secondary seal - sealant depth
production. be accurate. However, because 3. Primary seal - Poly Iso Butylene
4. Glass
conditions and methods of use of our 5. Spacer bar
When stored at or below 30°C, products are beyond our control, this
Dow Corning® 3362 HD Insulating information should not be used in
Glass Base has a usable life of 14 substitution for customer’s tests to
months from the date of production. ensure that our products are safe,
effective, and fully satisfactory for the
Dow Corning is a registered trademark of Dow Corning Corporation.
We help you invent the future. is a trademark of Dow Corning Corporation.
2013, October 2 XIAMETER is a registered trademark of Dow Corning Corporation.
Form No. 62-1635D-01 © 2011 - 2013 Dow Corning Corporation. All rights reserved.
3