11/5/21, 9:44 PM How Do Motorcycles Lean So Far Without Tipping Over?

| WIRED

RHETT ALLAIN SCIENCE 08.12.2015 11:00 AM

How Do Motorcycles Lean So Far

Without Tipping Over?
When a motorcycle turns, it leans. Why do these motorcycles lean so far
while taking tight turns?

Racing motor cyclist silhouetted on track ANTON WANT/GETTY IMAGES

R I D I N G A M OTO R C YC L E is just like riding a bike except it's much faster—oh, and you

don't have to pedal. In both cases, the two wheeled vehicle can lean significantly while
taking a turn. Why? Two reasons: fake forces and torque.

https://www.wired.com/2015/08/motorcycles-lean-far-without-tipping/ 1/6
11/5/21, 9:44 PM How Do Motorcycles Lean So Far Without Tipping Over? | WIRED

Fake Forces
In your introductory physics course, one of the biggest ideas is that a force changes the
motion of an object. One way to mathematically write this is with Newton's second law:

If a net force acts on an object, it accelerates. If you hold a ball in front of you and let go,
only one force acts on it—the gravitational force. The ball has an acceleration in the same
direction as the gravitational force so that it starts speeding up in the downward direction
and falls straight down.

Now for a quick example. Suppose I hang a pair of fuzzy dice from the rear view mirror of
my car. Now I accelerate the car, and the dice swing back. Don't try to pretend you don't
have fuzzy dice hanging in your car. I know you do.

OK, let's say it's a ball instead. But why does the ball (fuzzy dice) swing back? If you looked
at the forces on the ball, you have gravity pulling down and the tension in the string pulling
both up and forward. If the ball is at rest, what force pushes it back to balance the
horizontal component of the tension? The answer: nothing. There is not a force pushing
the ball back because the ball is accelerating forward.

Here is the key point: Newton's second law really only works in a non-accelerating
reference frame. When a human is in an accelerating car, we want Newton's law to work
like always. The only way to fix this problem is to add a fake force, like this.

This fake force is in the opposite direction as the acceleration of the car. It is this fake force
that "pushes the ball back" in the accelerating reference frame and this fake force would
h l f
https://www.wired.com/2015/08/motorcycles-lean-far-without-tipping/ 2/6
11/5/21, 9:44 PM How Do Motorcycles Lean So Far Without Tipping Over? | WIRED
have a value of:

Most introductory physics courses don't cover fake forces. Why not? Because students
already have some difficulty identifying the forces on an object. Add in fake forces and it
just gets crazy. This means that for all of the situations in an intro physics class, an object
will be observed from an inertial reference frame (which means non-accelerating).

What about a motorcycle turning in a circle? Since the velocity vector of the motorcycle is
changing, it has an acceleration (even if it is at a constant speed). This means that a fake
force pushes the rider in the opposite direction of the acceleration. The acceleration for an
object moving in a circle points towards the center of the circle and has a magnitude of:

Where r is the radius of the circle and v is the speed of the motorcycle. Of course, you can
probably guess that we have a special name for this fake force—we call it the centrifugal
force which literally means "center fleeing force". Don't confuse this with centripetal force
which is the force that causes an object to move in a circle.

Torque
When a car or motorcycle takes a turn, some external force pushes on the vehicle in the
direction of the center of the circle. This force is almost always the friction force between
the tires and the road. This frictional force will be important when looking at a turning
motorcycle.

Now we can get to the leaning motorcycle. Suppose that I have a motorcycle that is going
around a curve and NOT leaning. Since the motorcycle is turning, it is accelerating towards
the center of the circle. It turns out that this is easiest to explore in the accelerating frame
of the rider such that there will be a fake force pushing away from the center of the circle.

Here is a front view of the motorcycle along with the forces acting on it. The motorcycle is
turning to the left (as seen from the viewer).

https://www.wired.com/2015/08/motorcycles-lean-far-without-tipping/ 3/6
11/5/21, 9:44 PM How Do Motorcycles Lean So Far Without Tipping Over? | WIRED

In this reference frame, all the forces add up to zero. However, all of the torques do not add
up to zero. Try this. Put a pencil flat on the table and then push with two fingers in opposite
directions on the pencil. If these two forces are at the same location on the pencil, the
pencil remains stationary. If you push at the top and bottom of the pencil, the pencil turns.

Just as a force can change the velocity of an object, the torque can change the angular
velocity. With zero torque, you would have no change in angular motion. The torque from
a force depends on the magnitude of the force, the distance from the location of the force
to some rotation point and the angle the force is applied. If you wanted to write this as an
equation, it would be:

Where θ is the angle between F and r. Technically, torque is a vector, but let's just leave it
like this for now.
https://www.wired.com/2015/08/motorcycles-lean-far-without-tipping/ 4/6
11/5/21, 9:44 PM How Do Motorcycles Lean So Far Without Tipping Over? | WIRED

Going back to the diagram of the non-leaning and turning motorcycle, you can see the
problem. Just like the pencil, the friction force and the fake force are not at the same

location. If you don't lean, the net torque is not zero and you would "fall over." In a
motorcycle race, this would be a bad thing.

What changes if you the motorcycle leans? Here is the same motorcycle, but now leaning.

The net force is still zero in this accelerating reference frame—and now, the net torque is
also zero. Let's look at the torque as calculated about the point where the wheel touches
the ground. The frictional force and the normal force (from the ground pushing up) have
zero torque since they are both applied at the point that torque is calculated. That leaves
just the torque from the fake force and the torque from the gravitational force. They are in
opposite directions and so they can cancel. In the non-leaning bike, the gravitational force
was pushing right through the torque point so that it produced a zero torque and could not
cancel the torque from the fake force.

In short, leaning the bike allows there to be a gravitational torque to balance the torque
from the fake force. Leaning prevents you from falling over. I know that seems strange, but
it's true.

Why Doesn't a Turning Car Lean?

Well, a turning car does actually lean. However, it doesn't have to. Here is a force diagram
that is just like the turning motorcycle except that I have replaced it with a car.

https://www.wired.com/2015/08/motorcycles-lean-far-without-tipping/ 5/6
11/5/21, 9:44 PM How Do Motorcycles Lean So Far Without Tipping Over? | WIRED

Cars have 4 wheels (usually). If I take the right front wheel (seen on the left in the diagram)
as the point to calculate the torque, the gravitational force does indeed have a non-zero
torque since the center of gravity is not directly above the point of the tire. Also, the normal
force from the other tire would also exert a non-zero torque. With this many forces, it's
easy to see that you could have a net torque of zero. Cars don't have to lean to turn—but
motorcycles do.

Rhett Allain is an associate professor of physics at Southeastern Louisiana University. He enjoys

teaching and talking about physics. Sometimes he takes things apart and can't put them back together.

CONTRIBUTOR

TOPICS CIRCULAR MOTION TORQUE

https://www.wired.com/2015/08/motorcycles-lean-far-without-tipping/ 6/6