Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Compressor Oil Safety Data Sheet: General Air Products Part Number: APC01Q

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

For Sales and Support call 1-800-345-8207

Compressor Oil
General Air Products Part Number: APC01Q

Safety Data Sheet


MATERIAL SAFETY DATA SHEET Page 1 of 4

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Product Name: 20 Non-Detergent


Product Code:
Chemical Name: Hydraulic Oil
Chemical Family: Blend
Manufacturer: Scot Lubricants of PA Emergency Telephone Numbers:
6 Horwith Drive Information: 610-433-2527 8am-5pm EST M-F
Northampton, PA 18067 CHEMTREC: 800-424-9300 24 hrs everyday

2. COMPOSITION/INFORMATION ON INGREDIENTS

EXPOSURE GUIDELINES OSHA ACGIH


Component/CAS Number LO% HI% TWA STEL TWA STEL UNIT
LIMITS FOR THE PRODUCT 5 5
MG/M3
ADDITIVE MIXTURE CONTAINING COMPOUNDS OF CA, ZN, S, AND P.
1.00%
DEFOAMER 50 PPM
ORGANIC ZINC COMPOUND(S) MEASURED AS ZN
7440-66-6 .006%
SOLVENT-DEWAXED RESIDUAL OIL (PETROLEUM)
64740-62-7 0 TO 34%
SOLVENT-DEWAXED HEAVY PARAFFINIC DISTILLATE (PETROLEUM)
64742-65-0 65 TO 99%
ADDITIONAL EXPOSURE LIMITS -------------------------------- GOVERNMENT REGULATION
OTHER LIMIT – OIL MIST: 5MG/M3 OSHA PEL/ACGIH TLV

3. HAZARD IDENTIFICATION

EMERGENCY OVERVIEW
MAY CAUSE SKIN IRRITATION
APPEARANCE: AMBER FLUID ODOR: LUBE OIL ODOR
POTENTIAL HEALTH EFFECTS:
INHALATION: NO EFFECTS EXPECTED. INGESTION: PRACTICALLY NON-TOXIC.
EYE CONTACT: EXPECTED TO BE MINOR EYE IRRITANT.
SKIN CONTACT: PRACTICALLY NON- TOXIC IF ABSORBED (LD50 > 2000 MG/KG). MAY CAUSE MODERATE
IRRITATION WITH PROLONGED OR REPEATED CONTACT.
CARCINOGEN LISTED BY: IARC (N0) NTP (NO) OSHA (NO) ACGIH (NO) OTHER (NO)

NFPA/HMIS CLASSIFICATION HAZARD RATING


HEALTH – 0/0 0= LEAST 1=SLIGHT
FLAMMABILITY – 1/1 2=MODERATE 3=HIGH
REACTIVITY – 0/0 4=EXTREME

Revision: 2/22/10 NA=Not Applicable ND=No Data NE=Not Established


20 Non-Detergent Page 2 of 4
4. FIRST AID MEASURES

INHALATION: Move to fresh air.


EYE CONTACT: Flush with water for at least 15 minutes. If irritation persists, obtain medical assistance.
SKIN CONTACT: Wash with soap and water until no odor remains. If redness or swelling develops, obtain
medical assistance. Wash clothing before reuse.
INGESTION: If large amounts of this material are ingested, give quantities of water, induce vomiting, and
promptly obtain medical attention.

5. FIRE FIGHTING MEASURES

FLASHPOINT (METHOD): 445°F Minumum COC; 201°C Minimum COC


FLAMMABLE LIMITS: Not established
AUTO-IGNITION TEMP: 775°F Estimated; 359°C Estimated
EXTINGUISHING MEDIA: Water spray, dry chemical, carbon dioxide (CO2), foam.
FIRE FIGHTING INSTRUCTIONS: Avoid breathing smoke and vapor.
FIRE FIGHTING EQUIPMENT: Wear self-contained breathing apparatus and protective clothing. Use water
spray to keep fire-exposed containers cool
HAZARDOUS COMBUSTION PRODUCTS: Normal combustion forms carbon dioxide and water vapor;
incomplete combustion can produce carbon monoxide.

6. ACCIDENTAL RELEASE MEASURES

SPILLS OR LEAKS: Contain spill, advise EPA, state agency, if required. Absorb on inert material, shovel,
sweep or vacuum spill.

7. HANDLING AND STORAGE

NFPA Class IIIB Storage. Wash thoroughly after handling.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

VENTILATION: Ventilate as needed to comply with exposure limit. General dilution ventilation acceptable.
PERSONAL PROTECTIVE EQUIPMENT
EYE: Splash proof chemical goggles recommended to protect against splash of product.
GLOVES: Protective gloves recommended when prolonged skin contact cannot be avoided. The following
glove materials are acceptable: polyvinyl chloride (PVC); neoprene; nitrile; polyvinyl alcohol; viton.
RESPIRATOR: None is needed under normal conditions with adequate ventilation. If exposure exceeds the
control limits, respiratory protective equipment, which meets 29 CFR 1910.134 and is NIOSH/MSHA approved,
must be worn.
OTHER: If contact is unavoidable, wear chemical resistant clothing. The following materials are acceptable as
protective clothing materials: polyvinyl alcohol (PVA); polyvinyl chloride (PVC); neoprene; nitrile; viton;
polyurethane; launder soiled clothes.

Revision: 2/22/10 NA=Not Applicable ND=No Data NE=Not Established


20 Non-Detergent Page 3 of 4
9. PHYSICAL AND CHEMICAL PROPERTIES

APPEARANCE/ODOR: AMBER FLUID/SLIGHT ODOR. BOILING POINT: HIGH


VAPOR PRESSURE: <0.0001 (MM HG @ 20°C) MELTING POINT: N/A
MOLECULAR WEIGHT: N/A (G/MOLE) PACKING DENSITY: N/A
SOLUBILITY IN WATER: NIL (% BY VOLUME) OCTANOL/WATER COEFF. N.D.
EVAPORATION RATE: 1000X SLOWER (ETHYL ETHER=1) ODOR THRESHOLD: N.D.
SPECIFIC GRAVITY: 0.86 (WATER=1) VAPOR DENSITY: 10+ (AIR =1)
VISCOSITY: 150 SUS @ 100°F 32 CST @ 40°C

10. STABILITY AND REACTIVITY

STABILITY: Stable.
CONDITIONS TO AVOID: None known.
MATERIALS TO AVOID: Strong oxidizing agents.
HAZARDOUS POLYMERIZATION: Will not occur.
HAZARDOUS DECOMPOSITION: Combustion will produce carbon monoxide and asphyxiants.

11. TOXICOLOGICAL INFORMATION

FOR THE PRODUCT: INHALATION: Low acute toxicity. SKIN: Practically non-toxic if absorbed. Mild
irritation with prolonged or repeated contact. EYE: Mildly irritating on contact. ORAL: Small amounts
practically non-toxic.
SEVERELY SOLVENT REFINED HEAVY PARAFFINIC PETROLEUM OIL: INHALATION: low acute
toxicity. SKIN: practically non-toxic; if absorbed may cause moderate irritation with prolonged and repeated
contact. EYE: minimally irritating on contact. INGESTION: Practically non-toxic if swallowed.
CALCIUM SULFONATE: INHALATION/INGESTION: No data available. SKIN: Moderate irritant. Cause
allergic skin reaction in animals. EYE: Moderate to severe irritation.
BUTYLATED PHENOL: No data available for all routes of exposure.
ZINC DIALKYL DITHIOPHOSPHATE: INHALATION: Toxic hydrogen sulfide is generated when heated
above 200 deg. F. This can cause central nervous system (brain) effects, nausea, dizziness, confusion, loss of
sense of smell, muscle cramps, in coordination, unconsciousness, coma, respiratory failure, or death. SKIN:
Prolonged or repeated contact may cause moderate irritation, redness, drying, cracking, and dermatitis. EYE:
Irritant. ORAL: Harmful if swallowed.
ACRYLIC COPOLYMER: No data available for all routes of exposure.
2-ETHYLHEXANOL: INHALATION: Overexposure may cause nose, throat irritation, nasal discomfort and
discharge, chest pain, cough, headache, nausea, vomiting. SKIN: Irritant. May cause corneal injury. ORAL:
Moderately toxic. May cause abdominal discomfort, nausea, vomiting, and diarrhea.

12. ECOLOGICAL INFORMATION

ECOTOXICITY: No data available.

13. DISPOSAL INFORMATION

Follow federal, state and local regulations. Not RCRA hazardous waste if uncontaminated. If “used”, RCRA
criteria (ignitability, reactivity corrosivity, toxicity characteristics) must be determined. Do not flush to
drain/storm sewer. Contract to authorized disposal service.

Revision: 2/22/10 NA=Not Applicable ND=No Data NE=Not Established


20 Non-Detergent Page: 4 of 4
14. TRANSPORTATION INFORMATION

DOT
PROPER SHIPPING NAME Petroleum Lubricating Oil
HAZARD CLASS: Not regulated
ID NUMBER: Not regulated
LABEL REQUIRED: Not regulated
IMDG PROPER SHIPPING NAME: N.D.
IATA PROPER SHIPPING NAME: N.D.

15. REGULATORY INFORMATION

TSCA: This material is in compliance with the TOXIC SUBSTANCES CONTROL ACT (15 USC 2601-2629)
and is listed in the TSCA Inventory.

SARA 302 THRESHOLD PLANNING QUANTITY, N/A


SARA 304 REPORTABLE QUANTITY N/A
SARA 311/312 REPORTING: Health Immediate (Acute) No
Health Delayed (Chronic) No
Physical Fire No
Physical Sudden Release of Pressure No
Physical Reactive No

When a product and/or component are listed below, the regulatory list on which it appears is indicated.

ZINC DIALKYL DITHIOPHOSPHATE – NJ 01

01=SARA 313 02= SARA 302/304 03=IARC CARCINOGEN


04=OSHA CARCINOGEN 05=ACGIH CARCINOGEN 06=NTP CARCINOGEN
07=CERCLA 302.4 08=WHMIS CONTROLLED PROD.
10=OTHER CARCINOGEN
PA=PA RTK NJ=NEW JERSEY RTK CA=CALIFORNIA PROP 65
MA=MASS. RTK MI=MICHIGAN 406 MN=MINNESOTA RTK
FL=FLORIDA RI=RHODE ISLAND IL=ILLINOIS
NY=NEW YORK WV=WEST VIRGINIA CT=CONNECTICUT
LA=LOUISIANA ME=MAINE OH=OHIO

16. OTHER INFORMATION

SCOT LUBRICANTS OF PA, INC.


6 HORWITH DRIVE
NORTHAMPTON, PA 18067

The information on this form is furnished solely for the purpose of compliance with the OSHA Act, and shall not
be used for any other purpose. The information herein is given in good faith and is based on data considered
accurate. However, no warranty, expressed or implied, is made regarding the accuracy of these data or the results
to be obtained from the use thereof.

Revision: 2/22/10 NA=Not Applicable ND=No Data NE=Not Established

You might also like