This document provides specifications for a series of Zeners diodes ranging from 3.3V to 105V. It lists the absolute maximum ratings, typical electrical characteristics including zener voltage, impedance and leakage current for each device in the series. It also provides notes on how zener voltage is measured.
This document provides specifications for a series of Zeners diodes ranging from 3.3V to 105V. It lists the absolute maximum ratings, typical electrical characteristics including zener voltage, impedance and leakage current for each device in the series. It also provides notes on how zener voltage is measured.
This document provides specifications for a series of Zeners diodes ranging from 3.3V to 105V. It lists the absolute maximum ratings, typical electrical characteristics including zener voltage, impedance and leakage current for each device in the series. It also provides notes on how zener voltage is measured.
This document provides specifications for a series of Zeners diodes ranging from 3.3V to 105V. It lists the absolute maximum ratings, typical electrical characteristics including zener voltage, impedance and leakage current for each device in the series. It also provides notes on how zener voltage is measured.
Absolute Maximum Ratings * Ta = 25°C unless otherwise noted
Symbol Parameter Value Units
PD Power Dissipation 1.0 W @ TL ≤ 50°C, Lead Length = 3/8” Derate above 50°C 6.67 mW/°C TJ, TSTG Operating and Storage Temperature Range -65 to +200 °C * These ratings are limiting values above which the serviceability of the diode may be impaired.
Electrical Characteristics Ta = 25°C unless otherwise noted
VZ (V) @ IZ (Note 1) Max. Zener Impedance Leakage Current
2 www.fairchildsemi.com 1N4728A - 1N4764A Rev. G2 1N4728A - 1N4764A Zeners Top Mark Information Device Line 1 Line 2 Line 3 Line 4 Line 5 1N4728A LOGO 47 28 A XY 1N4729A LOGO 47 29 A XY 1N4730A LOGO 47 30 A XY 1N4731A LOGO 47 31 A XY 1N4732A LOGO 47 32 A XY 1N4733A LOGO 47 33 A XY 1N4734A LOGO 47 34 A XY 1N4735A LOGO 47 35 A XY 1N4736A LOGO 47 36 A XY 1N4737A LOGO 47 37 A XY 1N4738A LOGO 47 38 A XY 1N4739A LOGO 47 39 A XY 1N4740A LOGO 47 40 A XY 1N4741A LOGO 47 41 A XY 1N4742A LOGO 47 42 A XY 1N4743A LOGO 47 43 A XY 1N4744A LOGO 47 44 A XY 1N4745A LOGO 47 45 A XY 1N4746A LOGO 47 46 A XY 1N4747A LOGO 47 47 A XY 1N4748A LOGO 47 48 A XY 1N4749A LOGO 47 49 A XY 1N4750A LOGO 47 50 A XY 1N4751A LOGO 47 51 A XY 1N4752A LOGO 47 52 A XY 1N4753A LOGO 47 53 A XY 1N4754A LOGO 47 54 A XY 1N4755A LOGO 47 55 A XY 1N4756A LOGO 47 56 A XY 1N4757A LOGO 47 57 A XY 1N4758A LOGO 47 58 A XY 1N4759A LOGO 47 59 A XY 1N4760A LOGO 47 60 A XY 1N4761A LOGO 47 61 A XY 1N4762A LOGO 47 62 A XY 1N4763A LOGO 47 63 A XY 1N4764A LOGO 47 64 A XY
3 www.fairchildsemi.com 1N4728A - 1N4764A Rev. G2 1N4728A - 1N4764A Zeners Top Mark Information (Continued)
1st line: F - Fairchild Logo
F 47 2nd line: Device Name - 3rd to 4th characters of device name for 1Nxx series or 4th to 6th characters for BZXyy series
36 3rd line: Device Name - 5th to 6th characters of device name for 1Nxx series or Voltage rating for BZXyy series A 4th line: Device Name - 7th to 8th characters of device name for 1Nxx series or Large Die identification only for BZXyy series XY 5th line: Date Code - Two Digit - Six Weeks Date Code F
General Requirements: 1.0 Cathod Band 2.0 First Line: F - Fairchild Logo 3.0 Second Line: Device name - For 1Nxx series: 3rd to 4th characters of the device name. For BZxx series: 4th to 6th characters of the device name. 4.0 Third Line: Device name - For 1Nxx series: 5th to 6th characters of the device name. For BZXyy series: Voltage rating 5.0 Third Line: Device name - For 1Nxx series: 7th to 8th characters of the device name. (the 8th character is the large die identification) For BZXyy series: Large Die Identification character 6.0 Fourth Line: Date Code - Two Digit - Six Weeks Date Code Where: X represents the last digit of the calendar year Y represents the Six weeks numeric code 7.0 Devices shall be marked as required in the device specification (PID or FSC Test Spec). 8.0 Maximum no. of marking lines: 5 9.0 Maximum no. of digits per line: 3 10.0 FSC logo must be 20 % taller than the alphanumeric marking and should occupy the 2 characters of the specified line. 11.0 Marking Font: Arial (Except FSC Logo) 12.0 First character of each marking line must be aligned vertically
4 www.fairchildsemi.com 1N4728A - 1N4764A Rev. G2 1N4728A - 1N4764A Zeners TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FAST® IntelliMAX™ POP™ SPM™ ActiveArray™ FASTr™ ISOPLANAR™ Power247™ Stealth™ Bottomless™ FPS™ LittleFET™ PowerEdge™ SuperFET™ CoolFET™ FRFET™ MICROCOUPLER™ PowerSaver™ SuperSOT™-3 CROSSVOLT™ GlobalOptoisolator™ MicroFET™ PowerTrench® SuperSOT™-6 DOME™ GTO™ MicroPak™ QFET® SuperSOT™-8 EcoSPARK™ HiSeC™ MICROWIRE™ QS™ SyncFET™ E2CMOS™ I2C™ MSX™ QT Optoelectronics™ TinyLogic® EnSigna™ i-Lo™ MSXPro™ Quiet Series™ TINYOPTO™ FACT™ ImpliedDisconnect™ OCX™ RapidConfigure™ TruTranslation™ FACT Quiet Series™ OCXPro™ RapidConnect™ UHC™ OPTOLOGIC® µSerDes™ UltraFET® Across the board. Around the world.™ OPTOPLANAR™ SILENT SWITCHER® UniFET™ The Power Franchise® PACMAN™ SMART START™ VCX™ Programmable Active Droop™
DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, 2. A critical component is any component of a life support device (a) are intended for surgical implant into the body, or (b) support or system whose failure to perform can be reasonably expected or sustain life, or (c) whose failure to perform when properly used to cause the failure of the life support device or system, or to in accordance with instructions for use provided in the labeling, affect its safety or effectiveness. can be reasonably expected to result in significant injury to the user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative or In This datasheet contains the design specifications for Design product development. Specifications may change in any manner without notice.
Preliminary First Production This datasheet contains preliminary data, and
supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Obsolete Not In Production This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
