A0 A A1 B C A0 A A1 B C A0 A A1 B C

9950 9950 9950

2250 3350 1350 3000 2250 3350 1350 3000 2250 3350 1350 3000
2000 2000

4A 4A 4A
C-2 C-2 WF-1 B-4

2500

2500

2500
STAIRWELL STAIRWELL

3900

3900

3900
WF-1

B-3

B-3
PROPERTY LINE PROPERTY LINE
4 4 4
B-4 B-1 B-1

1400

1400

1400
C-1 C-1 C-1 TB/GB

2150

2150
WF-2

WF-2

WF-2
2300
STLDECK
OPEN

B-3
3A C-2 3A 3A B-4
WF-1

TB/GB

TB/GB
WF-2 WF-2 B-3

B-2

B-2

B-2

B-2
TG/GB
4100

4100

4100
F-1

WF-2

WF-2
STLDECK STLDECK

3350
3550
STLDECK

3 C-1 C-1 C-1

3 3
TB/GB B-1 B-1

WF-2
F-1

3450
STLDECK STLDECK STLDECK

4500
TB/GB
16000

16000

16000

16000

16000

16000
PART OF EXISTING BUILDING

PART OF EXISTING BUILDING

PART OF EXISTING BUILDING

B-2

B-2

B-2

B-2
TB/GB

TB/GB
6150

6150

6150
100MM THK CONC.
SLAB ON FILL W/ B-1 B-1
10MMØ REBARS SPACED
@ 450MM OCBW

2550
STLDECK STLDECK STAIRWELL

1300
STAIRWELL

2 2 2

2350 250

2350 250
C-1 TB/GB B-1

2600

2600

2600
ELEVATOR

TB/GB
ELEV. PIT ELEV. PIT OPEN SHAFT

TB/GB
4350

4350

4350

B-1

B-1

B-2
OPEN

250

1250 250

250
F-1

500

WF-2
150 B-2
B

2000
G
B/
1900

1900

1900
T
WF-2
1 C-1 C-1 C-1
1 1 B-2
TB/GB
PROPERTY LINE

PROPERTY LINE
2250

F-1

2250 1300 1550 1200

3350 4350 3350 4350 3350 4350
7700 7700 7700

TB/GB & WALL FOOTING MEZZANINE FLOOR FRAMING PLAN

FOUNDATION PLAN SCALE 1 : 100 Mts.
SCALE 1 : 100 Mts. SCALE 1 : 100 Mts.

COURSE STUDENT NAME INSTRUCTOR / PROFESSOR PROJECT TITLE REVISIONS SHEET CONTENTS SHEET NO.

ABORDE, STEVEN DRAFTED BY FOUNDATION PLAN

BUILDING TECHNOLOGY 5 AR.JOSEPH REA

S-1
GALDO, JACKILYN PROPOSED 6-STOREY OFFICE BUILDING CHECKED BY
TG/GB & WALL FOOTING
MAGLINTE, MAE MEZZANINE FLOOR FRAMING PLAN
COURSE CODE ARCBT5 STUDENT NO. 2018 - 102724 DEPARTMENT / COLLEGE SCHOOL RECOMMENDED BY
SECTION CEAT - 01 - 702P YEAR ENROLLED
DEPARTMENT OF ARCHITECTURE - COLLEGE OF APPROVED BY
SCHOOL YEAR
SEMESTER
2021-2022
1ST SEMESTER
PLACE ENROLLED
DATE ENROLLED ENGINEERING, ARCHITECTURE TECHNOLOGY
RIZAL TECHNOLOGICAL UNIVERSITY
ROOM NO. ITC - 318 ENROLLED BY DATE
 2 - 1.6MMx50x200MM THK C-CHANNEL
RAFTER ( TYP. TO 3 )

A0 A A1 B C A0 A A1 B C A0 A A1 B C
9950 9950 9950
2250 3350 1350 3000 2250 3350 1350 3000 2250 3350 1350 3000
2000 2000 2000

4A 4A 4A
B-4 B-4 B-4 1.2x50x150MM C- CHANNEL
PURLINS @ 750 MM OC

2500
2500

2500
STAIRWELL STAIRWELL
3900

3900

3900

B-3

B-3
B-3

B-3

B-3

B-3
4 4 4
B-4 B-1 B-1 B-4 B-1 B-1 B-4 B-1 B-1
1400

1400

1400
2150

2150

2150
STLDECK STLDECK
OPEN OPEN OPEN

B-3

B-3

B-3
3A B-4 3A B-4 3A B-4

PC
B-3 B-3 B-3
B-2

B-2

B-2

B-2

B-2

B-2

B-2

B-2

B-2

B-2

B-2

B-2
PC
4100

4100

4100
PC
STLDECK STLDECK STLDECK STLDECK STLDECK STLDECK

3500

3500
STLDECK STLDECK STLDECK

3 3 3
B-1 B-1 B-1 B-1 B-1
CONCRETE LEDGE

CONCRETE LEDGE

CONCRETE LEDGE
3300

3300
STLDECK STLDECK STLDECK STLDECK STLDECK STLDECK STLDECK STLDECK STLDECK

16000 MM
16000

16000

16000

16000

16000
PART OF EXISTING BUILDING

PART OF EXISTING BUILDING

B-2

B-2

B-2

B-2

B-2

B-2

B-2

B-2

B-2

B-2

B-2

B-2
6150

6150

6150
PC PC
B-1 B-1 B-1 B-1

2550

2550
STLDECK STLDECK STAIRWELL STLDECK STLDECK STLDECK STLDECK STLDECK STLDECK
250 250

2 B-1
2 B-1
2 B-1 PC

2350
2600

2600

2600
ELEVATOR ELEVATOR ELEVATOR
STLDECK STLDECK SHAFT STLDECK STLDECK SHAFT STLDECK STLDECK SHAFT

B-1
B-1
B-1
4350

4350

4350
B-2

B-1

B-1

B-2

B-1

B-2
250

250

1250 250
B-2 B-2 B-2 PC
B-3

1900
1900

1900
STLDECK STLDECK STAIRWELL STLDECK STLDECK STAIRWELL STLDECK STLDECK STAIRWELL

B-3

B-3
1 B-2 B-2 1 B-2 B-2 1 B-2
B-1

B-1

B-1
B-1

B-1

B-1
400 400 400
650 1000

650 1000

650 1000
STLDECK STLDECK STLDECK STLDECK
2

2
2 2 2
B- B-
B-

B-
B-

2
B-
B-3 B-3 B-3

150

2250 2250 3000

3350 4350 3350 4350 3350 4350
7700 7700 MM 7700

2ND. FLOOR FRAMING PLAN TYP. FLOOR FRAMING PLAN

SCALE 1 : 100 Mts. SCALE 1 : 100 Mts.
ROOF DECK FRAMING PLAN
SCALE 1 : 100 Mts.

COURSE STUDENT NAME INSTRUCTOR / PROFESSOR PROJECT TITLE REVISIONS SHEET CONTENTS SHEET NO.

ABORDE, STEVEN DRAFTED BY 2ND. FLOOR FRAMING PLAN

BUILDING TECHNOLOGY 5 AR.JOSEPH REA

S-2
GALDO, JACKILYN PROPOSED 6-STOREY OFFICE BUILDING CHECKED BY
TYP. FLOOR FRAMING PLAN
MAGLINTE, MAE ROOF DECK FRAMING PLAN
COURSE CODE ARCBT5 STUDENT NO. 2018 - 102724 DEPARTMENT / COLLEGE SCHOOL RECOMMENDED BY
SECTION CEAT - 01 - 702P YEAR ENROLLED
DEPARTMENT OF ARCHITECTURE - COLLEGE OF APPROVED BY
SCHOOL YEAR
SEMESTER
2021-2022
1ST SEMESTER
PLACE ENROLLED
DATE ENROLLED ENGINEERING, ARCHITECTURE TECHNOLOGY
RIZAL TECHNOLOGICAL UNIVERSITY
ROOM NO. ITC - 318 ENROLLED BY DATE
 6MM THK STEEL STIFFENER PLATES
A A1 B C A1 B C (BOTH SIDES)

7700 4350 6MM THK STEEL STIFFENER PLATES

(BOTH SIDES)
3350 1350 3000 1350 3000
2000

STEEL BEAM (SEE SCHEDULE) STEEL BEAM (SEE SCHEDULE)

B-3

B-1

B-1
2 STLDECK
PC
B-1
2 B-3
2 - ∠ 50x6 CLIP ANGLE
2 - ∠ 50x6 CLIP ANGLE
2100

2200

2200
2350
B-2

B-2

2450

2450
B-4

B-4

B-4
STLDECK STLDECK STLDECK STLDECK STLDECK ∠ 50x6 SEAT ANGLE

B-1
∠ 50x6 SEAT ANGLE
B-1

B-2

1250 250
4350

4350

4350

4350
B-2 PC B-3
2250

2000
1900

1900
2
STLDECK

B-
2
B-
STEEL COLUMN (SEE SCHEDULE) STEEL COLUMN (SEE SCHEDULE)
1 B-2 1
B-1

3000
650 1000

STLDECK
2
B-
4350

2
B-
B-3 1.2x50x150MM C- CHANNEL
PURLINS @ 750 MM OC

150 3000
3350 4350
2 - 1.6MMx50x200MM THK C-CHANNEL
RAFTER ( TYP. TO ALL ) COLUMN TO BEAM CONNECTION DETAILS
7700 SCALE 1 : 20 Mts.

∠ 50x6 SHEAR CONNECTORS

@ EVERY 400 MM OC (L = 150MM)
STEEL DECK t = 0.80MM
150MM (MIN) (Fy = 414MPa)

MACH. ROOM
UPPER DECK FRAMING PLAN DECK FRAMING PLAN STITCH WELDED

SCALE 1 : 100 Mts. SCALE 1 : 100 Mts.

STEEL BEAM (SEE SCHEDULE)

BEAM TO STEEL DECK CONNECTION DETAILS

10MMØ TOP BARS @ 125MM

CUT AT L/4
8MM 200MM
BEAMS SCHEDULE

125
TYPICAL BEAM SIZE FROM MEZZANINE FLOOR TO ROOF DECK

50
WELDING PASSES: B1 B2 B3 B4
1ST PASS : E6011 @ 300MM OCBW CONT.
2ND PASS : E6013
3RD PASS : E7011 W18x65 W18x60 W16x45 W16x36 STEEL DECK t = 0.80MM
(Fy = 414MPa)
CONCRETE: 9MMØ PAN BARS
F'c = 4000 psi
(27 MPa)

WELDING CONNECTION DETAILS TYPICAL SECTION

SCALE 1 : 5 Mts.

TYP. STEEL DECK DETAILS

SCALE NTS.

COURSE STUDENT NAME INSTRUCTOR / PROFESSOR PROJECT TITLE REVISIONS SHEET CONTENTS SHEET NO.

ABORDE, STEVEN DRAFTED BY UPPER DECK FRAMING PLAN

BUILDING TECHNOLOGY 5 AR.JOSEPH REA

S-3
GALDO, JACKILYN PROPOSED 6-STOREY OFFICE BUILDING CHECKED BY
MACH. ROOM DECK FRAMING PLAN
MAGLINTE, MAE WELDING CONNECTION DETAILS
COURSE CODE ARCBT5 STUDENT NO. 2018 - 102724 DEPARTMENT / COLLEGE SCHOOL RECOMMENDED BY BEAM DETAILS
SECTION CEAT - 01 - 702P YEAR ENROLLED COLUMN TO BEAM CONNECTION -
DEPARTMENT OF ARCHITECTURE - COLLEGE OF APPROVED BY
SCHOOL YEAR 2021-2022 PLACE ENROLLED
RIZAL TECHNOLOGICAL UNIVERSITY DETAILS
SEMESTER 1ST SEMESTER DATE ENROLLED ENGINEERING, ARCHITECTURE TECHNOLOGY
DATE
TYP. STEEL DECK DETAILS
ROOM NO. ITC - 318 ENROLLED BY
 STRUCTURAL NOTES:
I. GENERAL CONDITIONS
A. All pertinent provisions of the National Structural Code of the Philippines,
(NSCP C101-01), 2001, 5th edition, shall be strictly followed in the
fabrication, erection, construction & quality control aspects of the structure.
B. No changes, revisions, modifications, alterations, additions, deletions to
the approved Structural Plans, shall be done, without the written consent
of the Structural Engineer.
400 400
C. The Structural Engineer shall not be liable for any defects and/or damage on the
building or structure as a result of violations/non-conformances of any provisions
COLUMNS SCHEDULE of these Structural Notes as well pertinent provisions of NSCP C101-01
4-20MMØ (GRADE 60)TOP REBARS 10-20MMØ (GRADE 60) BOT. REBARS
CORNER BUNDLED AS SHOWN

FLOOR C1 C2 PC
2-20MMØ (GRADE 60) 2-20MMØ (GRADE 60)
II.STRUCTURAL STEEL

600
CONT. TORSION REBARS CONT. TORSION REBARS
CONCRETE: 4000 Psi (27 MPa)
10-20MMØ (GRADE 60) BOT. REBARS
CORNER BUNDLED AS SHOWN
4-20MMØ (GRADE 60) BOT. REBARS PEDESTAL TO MEZZANINE W10x68 W10x54 A. Yield Strenght, ASTM - 36 Fy = 248 Mpa
STEEL : 60000 PSI (414 MPA)

AT SUPPORT AT MIDSPAN
MEZZANINE TO THIRD FLOOR W10x65 W10x54 250 MM
B. Shop drawings for all steel structures (trusses), to be submitted by Contractor
STIRRUPS: CONCRETE:
THIRD FLOOR TO FIFTH FLOOR W10x54 W10x54 and /or Fabricator to Structural Engineer prior to fabrication with emphasis
10MMØ (GRADE 40) - 1 @ 50MM;
7 @ 100; REST @ 200MM OC.
F'c = 4000 psi
(27 MPa)
FIFTH FLOOR TO ROOF DECK W10x49 W10x54 W10x49 20MMØ VERTICAL BARS on the '' Working Point" of each joint concerned.
AT 200MM O.C. EACH FACE

20MMØ HORIZONTAL BARS

AT 250MM O.C. EACH FACE
III.STRUCTURAL WELDING WORKS
A. Minimum size of Fillet Welds shall be 4.0 mm with a minimum weld length of 50 mm
TYPICAL FB/GB DETAILS on each side of the steel member to be welded.
SCALE 1 : 20 Mts.

8-20MMØ CORNER REBARS

B. Use E-7011 Welding Electrodes ( Fujiweld) for all initial Welding pass for full penetration.
400 STEEL COLUMN
(SEE SCHEDULE) C. Use E-7013 Welding Electrodes ( Fujiweld) for all final welding passes on all steel
6-20MMØ ANCHOR BOLTS
members to be welded.

250 MM
(L = 500MM)
6MM THK. STIFFENER
STEEL COLUMN PLATES
GRID

400
GRID GRID (SEE SCHEDULE) 20MM THK BASE PLATE

300
6MM THK. STIFFENER
PLATES FFL
(400x400 MM)
IV.STRUCTURAL CONCRETE
VARIES VARIES
20MM THK BASE PLATE
SELF LEVELLING GROUT
(NON-SHIRNK)
PLAN A. Ultimate Compressive strength after 28-days, F'c=20.70 Mpa (3000 psi)
( FOOTING TO 4TH FLOOR )
(400x400 MM)
6-20MMØ ANCHOR BOLTS
NGL 400
(L = 500MM)
NOTES:
for all footings, columns, tie-beams, floor beams, roof beams and suspended slab.
1. FROM 4TH FLOOR TO ROOF DECK
GB GB GB
16-20MMØ (GRADE 60) ADOPT THE SAME CONCRETE THICKNESS B. Concrete test specimens shall be undertaken for all structures in
MAIN COLUMN REBARS 400x400 MM CONCRETE BUT CHANGE THE VERTICAL REBARS
BUNDLED AT CORNERS PEDESTAL W/ 16-20MMØ
REBARS (F'c = 4000 Psi)
TO 16MMØ.
2. CORNER REBARS ARE CONTINUOUS
the presence of the Structural Engineer or his duly authorized representative.
LATERAL TIES:
2850MM

400
FROM FOOTING TO ROOF DECK.
10MMØ (GRADE 40) - 1 @ 50;
C. Concrete Tests for compressive strength shall be done at 14th day
3500MM

15-20MMØ (GRADE 60) 6 @ 100; REST @ 150MM OC

20-20MMØ (GRADE 60)
CONCRETE: and 28th day of each concrete specimen.
F'c = 4000 psi
(27 MPa)
FB FB FB D. Concrete test results shall be submitted to the Structural Engineer
650MM

for evaluation.
DETAIL OF CONC. PEDESTAL ELEVATOR SHEAR WALL DETAILS E. All concrete pouring activities shall be done with the concurrence of the
SCALE 1 : 20 Mts. SCALE 1 : 20 Mts.

SECTION Structural Engineer or his duly authorized representative.

30-20MMØ (GRADE 60)
50MM THK GRAVEL BEDDING
44-20MMØ (GRADE 60)

12MMØ TOP BARS

V.REINFORCING BARS

VER.
@ 150 MM.O.C.
2ND FFL 12Ø VERT REBARS @600 MM OC
3
GRID GRID GRID 12MMØ NOSING BARS
L/ WITH 10Ø HOR. REBARS @ EVERY
A. Yield strengths :
3 LAYERS OF CHB
VARIES VARIES 10MMØ TREAD BARS GND FFL 3-12Ø LONG BAR WITH 1. 10MM dia. and below, Fy=230 Mpa (Grade 33) ASTM Grade 33

200 MM
@ 200 MM.O.C. 10Ø TIES @300 MM OC
shall have been implemented and subsequently approved by the Structural Engineer.
2. 12MM dia. and above, Fy=275 Mpa (Grade 40) ASTM Grade 40
400 MM
B. Testing of all deformed bars shall be done prior to cutting, bending
VARIES

L/
3
12MMØ REBARS
WF-2
and placement into forms.

RPOPERTY LINE
C. All reinforcing bars shall be bent cold.
3600MM

GRID GND. FFL 16MMØ MAIN BARS @

C-1 C-1 C-1 150 MM.O.C. NGL D. Shop drawing shall be submitted to the Structural Engineer showing bar cut-offs.
12Ø VERT REBARS @600 MM OC
VERIFY
VARIES

600 MM (MIN.)
CONCRETE:
12MMØ VERT. & HOR.
BARS @ 200 MM.O.C.
WITH 10Ø HOR. REBARS @ EVERY
3 LAYERS OF CHB
bend points,lap splices,concrete covering before any installation of rebars
F'c = 4000 psi STAGGERED

200 MM
( 27 MPa ) 200 MM. THK. 3-12Ø LONG BAR WITH
F-1 6-12MMØ FOOTING BARS
10Ø TIES @300 MM OC
VI. CONRETE MASONRY UNIT
200

W/ 10MMØ SHORT BARS @

200 MM.O.C.

7700MM 400 MM A. All load bearing concrete hollow blocks shall be 150 mm thickness and a
600
WF-1 50MM THK GRAVEL BEDDING minimum compressive strenght of F'm = 4.50 M Pa ( 650 psi)
PLAN 50MM THK GRAVEL BEDDING

TYPICAL FOOTING DETAILS STAIR/FOOTING DETAIL WALL FOOTING DETAILS B. All non load bearing hollow blocks of thickness 100 mm and 150 mm shall have
SCALE 1 : 50 Mts. SCALE 1 : 20 Mts. SCALE 1:20 MTS.
a minimum compressive strenght of F'm = 2.40 M Pa (350 psi)

VII. FOUNDATION BED

A. Allowable Soil Bearing Capacity is assumed to be not less than
200Kpa, for a minimum depth of 1.50m. from the Natural Grade Line,
and to be verified on site by the Structural Engineer
B. Final depth of footings shall be determined by the Structural Engineer
upon proper evaluation of actual site conditions.
C. Any adjustments to the depth and size of footings to be made by the
Structural Engineer, shall be done so in writing.
D. Foundation dimensions and thickness may be increased by the Structural
Engineer, depending on the actual soil condition / soil bearing capacity of
the foundation bed.

COURSE STUDENT NAME INSTRUCTOR / PROFESSOR PROJECT TITLE REVISIONS SHEET CONTENTS SHEET NO.

ABORDE, STEVEN DRAFTED BY TYPICAL FB/GB DETAILS

BUILDING TECHNOLOGY 5 AR.JOSEPH REA

S-4
GALDO, JACKILYN PROPOSED 6-STOREY OFFICE BUILDING CHECKED BY
TYPICAL FOOTING DETAILS
MAGLINTE, MAE COLUMNS SCHEDULE
COURSE CODE ARCBT5 STUDENT NO. 2018 - 102724 DEPARTMENT / COLLEGE SCHOOL RECOMMENDED BY DETAIL OF CONC. PEDESTAL
SECTION CEAT - 01 - 702P YEAR ENROLLED
STAIR FOOTING DETAILS
DEPARTMENT OF ARCHITECTURE - COLLEGE OF APPROVED BY ELEVATOR SHEAR WALL DETAILS
SCHOOL YEAR
SEMESTER
2021-2022
1ST SEMESTER
PLACE ENROLLED
DATE ENROLLED ENGINEERING, ARCHITECTURE TECHNOLOGY
RIZAL TECHNOLOGICAL UNIVERSITY WALL FOOTING DETAILS
ROOM NO. ITC - 318 ENROLLED BY DATE