EPD - Type II

Based on ISO 14021

Environmental
Product Declaration

Product Type of equipment / S55770-T379 RDJ100

Product No.

Product

Product line SRA

Process control Beijing Siemens Cerberus Electronics Ltd.

No.1 Fengzhi Dong Lu, Xi Bei Wang, Haidian District

100094, Beijing, China

Management System since by

ISO 9001 (Quality) 06.01.2001 LPCB
ISO 14001 (Environment) 05.07.2005 SGS
OHSAS 18001 (OH&S) 12.12.2011 SGS

Environmentally compatible Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes
product design the environmental impact of its products with respect to production, procurement, sales, use, services and disposal
during the product and process planning phases by complying with Siemens EP Standard No. 1 (former SN 36350)
"Specifications on Environmentally Compatible Product and System Design".

Product use Typical energy consumption 5kWh/a

Maintenance Change of batteries

1 year

Risk of fire Fire protection according to EN 60730

Fire load 8MJ

Packaging 20-PAP Corrugated fiber board Gift box (non-RF)

21-PAP Fiber board Gift box insert (non-RF)
22-PAP paper Operating instruction (non-RF)
A333A Outer carton (non-RF)
20-PAP Corrugated fiber board Gift box (RF)
21-PAP Fiber board Gift box insert (RF)
22-PAP paper Operating instruction (RF)
A333A Outer carton (RF)

Page 1/5
 EPD - Type II
Based on ISO 14021

Notes on disposal One-way, recyclable

Materials Total weight of device 322g

The total weight of a device may deviate from the total of the weights of all individual components due to rounding.

Plastics ABS FRONT CABINET (sliders) 41g

ABS FRONT CABINET (no sliders)
ABS REAR CABINET (one button)
ABS REAR CABINET (two buttons) 31g
ABS BATTERY COMPARTMENT 10g
PC LCD LENS 10g
PC LCD SUPPORT 7g
ABS ROTARY KNOB 9g
PC WALL PLATE 44g
PC TERMINAL BLOCK COVER 2g
ABS PUSH BUTTON 2g
POM SLIDE SWITCH BASE 2g
ABS SLIDE SWITCH CAP 2g
PC TABLE STAND SUPPORT

Metals 0.3MM TH'K SUS301-1/2H CONTACT PLATE+VE 1g

0.3MM TH'K SUS301-1/2H, DIA0.5MM SUS304-WPBCONTACT PLATE -VE 1g
0.3MM TH'K SUS301-1/2H, DIA0.5MM SUS304-WPBCONTACT PLATE COMMON 1g
DIA.0.8MM, C5191W-H; zinc plated ANTENNA
0.25MM TH'K C5191-H; nickel plated BATTERY CONTACT PLATE 1g
0.12MM TH'K SUS301-3/4H SLIDER CONTACT PLATE
0.8MM TH'K BRASS C2680-H; nickel plated CONTACT FORK 1g
BRASS WIRE CAGE BRASS WIRE CAGE 2g
POWER CONTACT PLATE; nickel plated POWER CONTACT PLATE 2g
Steel; nickel plated ST SCREW, 2.0X6.0, D=6 PWH/B 1g
Steel; nickel plated ST SCREW, 2.3X8.0 1g
Steel; nickel plated M/C SCREW, M3X10X0.5P, D=6"+/-"BH 1g
Steel; nickel plated NUT, SQUARE 1g
Steel; galvanized SCREW, 12TJ001N50 1g

Others LCD > 100 cm² 30g

Batteries / Accumulators 48g
Relays 15g

PCBAs (Printed Circuit Board FR4; TBBA; solder SnAgCu RDHFLALL02V12 33g
assembled) FR4; TBBA; solder SnAgCu RDHFLALL01V11 29g

Page 2/5
 EPD - Type II
Based on ISO 14021

Special components
(part of the assembled PCB)

*Variant parts list

S55770-T379

[g]
Total weight of device 322
FRONT CABINET (sliders) 41
FRONT CABINET (no sliders)
REAR CABINET (one button)
REAR CABINET (two buttons) 31
BATTERY COMPARTMENT 10
LCD LENS 10
LCD SUPPORT 7
ROTARY KNOB 8
WALL PLATE 44
TERMINAL BLOCK COVER 2
PUSH BUTTON 2
SLIDE SWITCH BASE 2
SLIDE SWITCH CAP 2
TABLE STAND SUPPORT

CONTACT PLATE+VE 0
CONTACT PLATE -VE 1
CONTACT PLATE COMMON 1
ANTENNA
BATTERY CONTACT PLATE 0
SLIDER CONTACT PLATE
CONTACT FORK 1
BRASS WIRE CAGE 2
POWER CONTACT PLATE 1
ST SCREW, 2.0X6.0, D=6 PWH/B 1
ST SCREW, 2.3X8.0 1
M/C SCREW, M3X10X0.5P, D=6"+/-"BH 1
NUT, SQUARE 0
SCREW, 12TJ001N50 1

Page 3/5
 EPD - Type II
Based on ISO 14021

LCD > 100 cm² 30

Batteries / Accumulators 48
Relays 15

RDHFLALL02V12 33
RDHFLALL01V11 29

Fire load [MJ] 8

Typical energy consumption

[kWh/a] 5

Special components (part of the assembled PCB)

[pcs]

Packaging
Gift box (non-RF) [g] 44
Gift box insert (non-RF) 5
Operating instruction (non-RF) 30
Outer carton (non-RF) 500
Gift box (RF) 81
Gift box insert (RF) 46
Operating instruction (RF) 30
Outer carton (RF) 700

Page 4/5
 EPD - Type II
Based on ISO 14021

Disposal The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must
not be disposed of as unsorted municipal waste. The relevant national legal rules are to be adhered too. Regarding
disposal, use the systems setup for collecting electronic waste.
Observe all local and applicable laws.

Comments
EU-directive 2011/65/EU (RoHS)
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive.

Regulation (EC) No. 1907/2006 (REACH)

To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the
candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) in concentrations above 0.1 % w/w.
(Status according to the creation date of this document.)

The silicone rubber mats have been heated at 200 ºC for 2 hours. The plastic parts were manufactured without silicone containing mold release agents.

Legal Disclaimer: This declaration is for information purpose only.

This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular
composition for a particular period.
Beijing Siemens Cerberus Electronics Ltd. therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the
maximum extent under the law.
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.

30.03.2017

Page 5/5