Material Approval Request Plan (Architectural Work)

PKG-3 / PT. AGCIA PERTIWI

RDMP Project

Estimated Delivery
FMAR Shop Dwg Fabrication
(On site)

No. Items Description Remarks

Estimated Submission Submission Approval
Approval Date Submission Approval
Submission Date JO Letter No. MAR No. IPMT Letter No. Date Manufacturer Start Date Finish Date Start Date Finish Date
(By Owner) (● / ×) Date Date
Date (To JO) (To JO) (To Owner)

sub. 1

rev. 1

rev. 2

rev. 3
1 Piling N/A

THK. 13 mm x 13mm Joint Sealant (Two-component

polysulfide)
1) Isolation Joint
THK. 13 mm x 187mm (D) Premolded Joint Filler
conform to ASTM D1752, Type 1 or Equal
Saw Cut : 10 mm x 37.5 mm w/ Joint Sealant and
2) Control Joint
backer rod for S.O.G. or Paving .
For the underside of foundations :
3) Concrete Protection Barriers Bituminous self adhesive membrane with mineral finish
“Bitushield” by Servicised or approved equal.

For the vertical and upper horizontal surfaces of

4) Concrete Protection Barriers Concrete :
Coats of an approved Bitumen-Latex Emulsion Paint

Floor Concrete Surface Finishing w/ Steel Trowel on

5) Steel Trowel Finish
Green Concrete.fosroc

Paver Tile for walkway

6) Precast Concrete Paving Tile ( on Waterproof Membrane Sheet at the roof of
Substation )

2 Masonry Work

THK. 190 mm Solid Brick / Block, ASTM C129 or BS

EN 771-3 ,
Cement or Cement - lime mortar / Anchors and
1) Interior Masory Wall galvanized expanded MU 422 PT.MORTAR UTAMA
metal joint reinforcement at every 2 horizontal brick /
block course.
Including control joint at maximum 9,000 mm spacing.

THK. 100 mm Solid Brick / Block or Hollow Block + 25

mm Air Space +
2) Exterior Cavity Wall System THK. 50 mm Insulation + THK. 200 mm Solid Brick /
Block or Hollow Block.
Including Anchors , ties and joint reinforcements.

Pre Cast or In-Situ Reinf. Concrete Lintel

3) Concrete Lintel
up to 350 mm Width - 390 mm (h)

3 Plaster Work
THK.16 mm Cement Mortar,
Including Galvanized metal lath, stop beads , corner
1) Int. Wall Cement Mortar Plaster MU202 PT.MORTAR UTAMA
beads and
Steel Trowel Finish.

THK. 25 mm Cement Mortar,

Including Galvanized metal lath, stop beads , corner
2) Ext. Wall Cement Mortar Plaster MU202 PT.MORTAR UTAMA
beads and
Steel Trowel Finish.

3) Fair Faced Concrete Finish Fair Faced Concrete finish for Wall / Column / Pedestal

4) Fair Faced Concrete Finish Fair Faced Concrete finish for Ceiling / Soffit

Thermal & Moisture Protection

4
Work

THK. 3 mm EPDM Single-Ply Roofing System, Johns

Manville Fully-Adhered PVC Roof System or approved
equal. ( shall be suitable for high wind regions )
1) Roof WaterProofing System - THK. 50 mm (Minimum) Plain Concrete w/ Steel Trowel
Type 2 Finish for Dranige Slope of Roof
THK. 0.25 mm Polyethylene Film
THK. 110 mm Rigid Extruded Polystyrene Insulation
(Min. Density 35kg/m3)

'THK.2.5 mm x 150 mm Aluminium Coping / Including

'2) Parapet Coping Adhesive on
top of concrete , Fixing w / Dia. 3.7 Drive Pin @ 400
'THK. 1.8 mm Lead Sheet (CODE 4) Flashing w/
Waterproofing Membrane. Including Sealant , THK. 1.5
'3) Parapet WaterProofing System
mm Aluminium Fixing Plate and Dia. 3.7 Drive Pin @
600

'THK. 50 mm Roof Expansion Joint ,

Filled with Polystyrene Joint Filler and Sealant on Top
& Bottom.
THK. 1.6 mm Galvanized Steel Cover Flashing
'4) Roof Expansion Joint System (W=400) w / Paint
and Fixed w/ Dia. 3.7 mm Drive Pin @ 600.
Including THK. 1.2 mm Galvanized Steel Expansion
Joint Cover
w/ Paint on Soffit of Girder.

'THK. 50 mm External Wall Expansion Joint

Filled with Polystyrene Joint Filler and Sealant on
BothSide.
'5) Wall Expansion Joint System
Including THK. 1.2 mm Galvanized Steel Expansion
Joint Cover w/ Paint
on Internal Side of Wall
'THK. 50 mm Internal Wall Expansion Joint
'6) Wall Expansion Joint System Filled with Polystyrene Joint Filler and Sealant on Both
Side

THK. 50 mm Floor Expansion Joint

Filled with Polystyrene Joint Filler and Sealant .
7) Floor Expansion Joint System
And Stainless Steel Plate w/ Aluminium Frame
Expansion Joint Cover

5 Tile & Stone Work

Heavy Duty Ceramic Tile Base (Acid Resistant)
100 mm Height w/ 8 mm ~12 mm Thickness as per
Manufacturer's
1) Tile Base Standard. The size shall match with floor tiles. MU 445 PT.MORTAR UTAMA
Laid with Cement and Sand Mortar or Gluing-on with
Adhesive.
Including Base Mortar up to 20 mm Thickness.
 Material Approval Request Plan (Architectural Work)
PKG-3 / PT. AGCIA PERTIWI
RDMP Project

Estimated Delivery
FMAR Shop Dwg Fabrication
(On site)

No. Items Description Remarks

Estimated Submission Submission Approval
Approval Date Submission Approval
Submission Date JO Letter No. MAR No. IPMT Letter No. Date Manufacturer Start Date Finish Date Start Date Finish Date
(By Owner) (● / ×) Date Date
Date (To JO) (To JO) (To Owner)

6 Door & Window Work

 Material Approval Request Plan (Architectural Work)
PKG-3 / PT. AGCIA PERTIWI
RDMP Project

Estimated Delivery
FMAR Shop Dwg Fabrication
(On site)

No. Items Description Remarks

Estimated Submission Submission Approval
Approval Date Submission Approval
Submission Date JO Letter No. MAR No. IPMT Letter No. Date Manufacturer Start Date Finish Date Start Date Finish Date
(By Owner) (● / ×) Date Date
Date (To JO) (To JO) (To Owner)

Steel Flush Doors , Maximum 3 M2 Surface

Complying with Steel Door Institute, SDI A250.11
Door Leaf : Double Skinned with minimum 18 gauge
Galvanized.
Standard door thickness 45 mm.
Insulation Core : Filled w/ polystyrene foam core,
1) Interior Steel Door and Frame w/ compliance with local energy codes in force. PT.LION METAL WORK
Paint Door Frame : Minimum 16 gauge Galvanized. TBK
FInish : One coat of rust-inhibitive metallic primer and
field paint according to Sec.2.23 of Project Spec. no.
26070-100-3SS-A000-J0001

Sound Transmission Coefficient (STC) rating shall be

25 or better.

Fixed Blade Type Steel Louver

Blade : Minimum thickness 1.6 mm Galv. Steel w/
Paint.
Frame : Minimum thickness 1.6 mm Galv. Steel w/
Paint. PT.LION METAL WORK
2) Steel Lover and Frame W/ Paint
Average Frame Depth : 100 mm ~ 150 mm as TBK
per
Manufacturer's Standards.
Including Bird Screen w/ Steel Frame and all
accessories.

Mortise Lock Set w/ Latch, Satin Chrome Plated

Master Key System, PT.LION METAL WORK
3) Door Lock
Comply with ANSI or Equivalent. TBK
Manufactured by Schlage or approved equal

Door Closer, Stainless Steel Heavy Duty

Non-Handed Rack and Pinion Type PT.LION METAL WORK
4) Door Closer
Comply with ANSI / BHMA A156.4 or Equivalent. TBK
Manufactured by Yale or approved equal

Hinges, Stainless Steel Heavy Duty

PT.LION METAL WORK
5) Miscellaneous Hardwares Full mortise, 5 knuckle
TBK
Manufactured by Hager or approved equal

Door Stops, Stainless Steel Heavy Duty PT.LION METAL WORK

6) Miscellaneous Hardwares
Manufactured by Rockwood or approved equal TBK

7 Painting Work
Dust Proof Epoxy Paint under Raised Access Floor
1) Epoxy Floor Paint System
D.F.T : Up to 300 microns

Anti Skid Floor Coating ( for switchgear room, HVAC

2) Concrete Floor Paint
Room, etc. )

Epoxy Paint for Base

3) Base Paint
D.F.T : Minimum 300 microns

Interior Latex Eg-Shel Paint,

4) Interior Wall Paint ( for Plster & 1st : Premium Wall & Wood Primer
Masonry ) 2nd : ProMar 200 1.6 Mils DFT
Manufactured by Sherwin Williams or approved equal

Weathershield Emulsion Painted on Fair Faced

5) Exterior Wall Paint Concrete or Plaster Wall
Minimum 3 coats.

Acrylic Emulsion Paints on Plaster or Fair Faced ,

6) Interior Ceiling Paint
Minimum 2 Coats.

Acid Resistant Paints on Plaster or Fair Faced ,

7) Interior Ceiling Paint
Minimum 2 Coats.

8) Interior Ceiling Paint Acid Resistant Floor Paint

8 Finish Work

Panel : Minimum 16 mm thickness Armstrong Fine

Fissured Open Plan with HumiGuard Plus or approved
equal
Approx. Size 600 x 1200 / Non-Combustible, Non-
1) Suspended Acoustic Ceiling Reflecting
System NCR 0.75, CAC 35, AC 170, Light Reflect 0.86, Class
A fire rating.

Hot dip.Galvanized Steel Exposed Grid System

conform to Project Spec. 26070-100-3SS-A000-J0001.
 Material Approval Request Plan (Architectural Work)
PKG-3 / PT. AGCIA PERTIWI
RDMP Project

Estimated Delivery
FMAR Shop Dwg Fabrication
(On site)

No. Items Description Remarks

Estimated Submission Submission Approval
Approval Date Submission Approval
Submission Date JO Letter No. MAR No. IPMT Letter No. Date Manufacturer Start Date Finish Date Start Date Finish Date
(By Owner) (● / ×) Date Date
Date (To JO) (To JO) (To Owner)

600 mm x 600 mm - 30~40 mm THK.

Height up to 60 cm
Panel : Cement Congested Steel Panel, ConCore
1250 by Tate Inc.,
AFS1250 by AFS, Inc. or an approval equal.
Finished w/ anti-static PosiTiIe Carpet (or
approved equal) or
High Pressure Laminate
Pedestal : Hot-dip. Galvanized Steel / Stringer Type.
Adjustable steel pedestal shall be glued
and mechnically
anchord w/ at least 2 fasteners to slab.
ConCore bolted stringer pedestal system
2) Raised Acces Floor System by Tate Inc.,
Bolted stringer pedestal system by AFS,
Inc. or an approval equal.
Loading : The floor system shall be capable of
supporting a concentrated
load of 4.5 kN or a distributed load of 15
KN/m2 with a maximum
deflection of 1mm.
Fire Resistance : The flame spread and smoke
development values for
access floor shall be Class A as
per ASTM E 84 or
Equivalent CODE.
Minimum of Fire Rating : 1 Hour.

THK. 6.0 mm, Non - Conductive Safety Floor Mat for

3) Rubber Mat
Substation

Firestop for Gaps between the top of walls and ceilings,

between the bottom and floor.
4) FireStop
THK. 50 mm Firestop Including Fixing Materials
Hilti or approved Equal.

Recessed Angle Frame / Approximately 1200mm x

1200mm, 3/4 in ( 20mm ) deep w/ resilient Vinyl
Cushions
5) Entrace Floor Mat & Frame
Manufactured by Pawling Corp or equal, Drain-well
RG-250 entrance with aluminum abrasive insert, roll
back capability.
 Material Approval Request Plan (Architectural Work)
PKG-3 / PT. AGCIA PERTIWI
RDMP Project

Estimated Delivery
FMAR Shop Dwg Fabrication
(On site)

No. Items Description Remarks

Estimated Submission Submission Approval
Approval Date Submission Approval
Submission Date JO Letter No. MAR No. IPMT Letter No. Date Manufacturer Start Date Finish Date Start Date Finish Date
(By Owner) (● / ×) Date Date
Date (To JO) (To JO) (To Owner)

9 Roofing & Siding Work

THK. 50 mm Profiled Insulated Wall Panel w/ Fluorine

Coating.
Exposed surface of the interior panel skin : Silicon
Polyester Coating.
The panel shall be fabricated from zinc coated steel
conforming to
ASTM A 653 SS Grade 37 with G 90 coating or
1) Insulated Metal Wall Panel Equivalent.
THK. 50 mm HCFC free Poly-Urethane Insulation.
Including Ridge / Corner / Gable / Eave / Base
Flashings

Centria Versapanel or MBCl Eco-ficient Wall Panels or

approved equal
Conform to Project Spec. 26070-100-3SS-A000-J0001

2) Splash Block 450 mm (L) x 300 mm (W) x 150 mm (H)

 Material Approval Request Plan (Architectural Work)
PKG-3 / PT. AGCIA PERTIWI
RDMP Project

Estimated Delivery
FMAR Shop Dwg Fabrication
(On site)

No. Items Description Remarks

Estimated Submission Submission Approval
Approval Date Submission Approval
Submission Date JO Letter No. MAR No. IPMT Letter No. Date Manufacturer Start Date Finish Date Start Date Finish Date
(By Owner) (● / ×) Date Date
Date (To JO) (To JO) (To Owner)

10 Miscellaneous Work

Approx. 1,200 mm (L) x 800 mm (H) -THK. 6.0 mm,

Melamine Plastic Laminate
1) Building Sign Board
Wall Mounted Type
Fire retardant and self-extinguishing.

Approx. 100 mm (L) x 250 mm (H) -THK. 6.0 mm,

2) Room Number Plates & Name
Melamine Plastic Laminate
Plates
Fire retardant and self-extinguishing.

L- 50 x 50 x 5 Galv. Angle or Dia. 42.2 mm x 3.56 mm

Galv. Pipe Frame
50 mm x 50 mm - Dia. 3.0 mm Galv. Steel Wire Mesh
w/ PVC Coating as per
3) Chain Link Wire Panel
ASTM F 668 or Equivalent.
(for Cable Area , Gas Cylinder
Dia. 60.3 mm x 3.91 mm Galv. Pipe for Gate Post.
Shelter etc.,)
Dia. 60.3 mm x 3.91 mm Galv. Pipe intermediate Post
(if req'd as per length of span)
Personal Gate : Minimum 900 mm Clear Opening and
Locked Device.

Chain Link Wire Fence ( H = 2,000 mm ~ 2,700 mm )

Dia. 60.3 mm x 5.54 mm Galv. Pipe Post @ 3,000
(Approx.)
Dia. 73 mm x 5.16 mm Galv. Pipe for Copner & End
Post.
50 mm x 50 mm - Dia. 3.0 mm Galv. Steel Wire Mesh
4) Chain Link Wire Fence for
w/ PVC Coating.
Transformer Area
Personal Gate : Minimum 900 mm Clear Opening and
Locked Device.
Equipment Gate : 3,000 mm ~ 3,500 mm Clear
Opening and Locked Device.
Including Concrete Work and all Accessories to
Complete the Work.
 Material Approval Request Plan (Architectural Work) REV. DATE 11/29/2021

PKG-3 / PT. AGCIA PERTIWI

RDMP Project

Estimated Delivery
FMAR Shop Dwg Fabrication
(On site)
No. Items Description Remarks
Estimated Submission Submission Approval
Approval Date Submission Approval
Submission Date JO Letter No. MAR No. IPMT Letter No. Date Manufacturer Start Date Finish Date Start Date Finish Date
(By Owner) (● / ×) Date Date
Date (To JO) (To JO) (To Owner)

sub. 1

rev. 1

rev. 2

rev. 3
1 Con'c work N/A

05-Apr-2021
Coats of an approved Bitumen-Latex Emulsion Paint
1) Bituminous Coating & Membrane 26071-JO-KPB-LT-02560 MAR-H-ETI-AR-00170 1489/KPB1000/2021-S5 14-Apr-2021 20-May-2021 PT.FOSROC ●
Bituminous self adhesive membran

05-Aug-2021

29-Sep-2021

01-Oct-2021
Hot-Dip Galvanized Steel (ASTM A36 Or Equivalent)
Any shape of steel sections and frames to be PT. SEPULUH SUMBER
2) Embedded Plate, Angle
embedded in concrete. Included welded anchoring rod ANUGERAH
and accesoreis.

For Concrete Paving, Walkway

Steel wire fabric M10x150x150
3) Steel Wire Mesh
ASTM A1064/A1064M Grade 70 (Yield Strength = 485
MPa, Tensile Strength = 550 Mpa).

Width = 9"
4) Waterstop
PVC, Ribbed Centerbulb Type conform to CRD C572.

2 Isolation Joint N/A

04-Sep-2021

07-Sep-2021
13mm, Premolded Joint Filler conform to ASTM D1752, 1. PT. FOSROC
1) Bitminous impregnated fiberboard
Type 1 or Equal INDONESIA

04-Sep-2021
1. PT. FOSROC
2) Joint Sealant self-leveling, Two-component polysulfide
INDONESIA

18 Dia Backer rod.

3) Backup Rod
ASTM D1056, Round closed cell rod

3 Expansion Joint N/A

04-Sep-2021

07-Sep-2021
75mm, Premolded Joint Filler conform to ASTM 1. PT. FOSROC
1) Bitminous iimpregnated fiberboard
D1752, Type 1 or Equal INDONESIA
04-Sep-2021

1. PT. FOSROC
2) Joint Sealant self-leveling, Two-component polysulfide
INDONESIA

3) Backup Rod ASTM D1056, Round closed cell rod

4) Al. Plate W=120mm, THK 2.0mm

4 Masonry works
9/9/2021

1) Clay brick 230 x110 x 55 mm, SNI-15-2094-2000 (5 Mpa) 1. PT. KUTAI INTI BETON

2) Brick accesaries Galv. Tie Anchor @780

5 Plastering works N/A

10/5/2021

10/5/2021

ANSI A42.2 for all applications not otherwise shown or "waiting response from PT Multi Guna Rejeki
1) Portland Cement 26071-JO-KPB-LT-04207 MAR-H-ETI-AR-00224 19-Oct-2021 ASTM
specified. Owner" (DRYMIX)

Bead (Stop, Corner, etc.)

2) Plastering accesaries
Galvanized metal lath

6 Roof Work N/A

14-Aug-2021

31-Aug-2021

THK. 1.5 mm EPDM Single-Ply Roofing System 1. Beijing Oriental Yuhong

01-Oct-2021

28-Oct-2021

Johns Manville Fully-Adhered PVC Roof System or Waterproof Technology

1) Waterproof Membrane approved equal.
White color applied, suitable for high wind regions.
26071-JO-KPB-LT-03549 MAR-H-ETI-AR-00202 2533/KPB1000/2021-S5 03-Sep-2021 10-Sep-2021 Co., Ltd
2. PT Estop Indonesia
×
26071-100-3SS-A10-00001 Section 2.13 3. Fosroc Indonesia
14-Aug-2021

31-Aug-2021

01-Oct-2021

28-Oct-2021

1. Beijing Oriental Yuhong

Rigid Extruded polystyrene board
2) XPS Insulation, THK110 ASTM C576, BS 3837 Thermal resistance
Thickness 110mm, Density : more than 35kg/m3
26071-JO-KPB-LT-03554 MAR-H-ETI-AR-00203 2645/KPB1000/2021-S5 03-Sep-2021 23-Sep-2021
Waterproof Technology
Co., Ltd ×
2. PT Estop Indonesia
 Material Approval Request Plan (Architectural Work) REV. DATE 11/29/2021

PKG-3 / PT. AGCIA PERTIWI

RDMP Project

Estimated Delivery
FMAR Shop Dwg Fabrication
(On site)
No. Items Description Remarks
Estimated Submission Submission Approval
Approval Date Submission Approval
Submission Date JO Letter No. MAR No. IPMT Letter No. Date Manufacturer Start Date Finish Date Start Date Finish Date
(By Owner) (● / ×) Date Date
Date (To JO) (To JO) (To Owner)

05-Oct-2021
Φ=150, Cast Iron w/strainer
3) Roof Drain 1. PT Banyoe Atika Mandiri
For size, detail and type as per Manufacturer Standard
 Material Approval Request Plan (Architectural Work) REV. DATE 11/29/2021

PKG-3 / PT. AGCIA PERTIWI

RDMP Project

Estimated Delivery
FMAR Shop Dwg Fabrication
(On site)
No. Items Description Remarks
Estimated Submission Submission Approval
Approval Date Submission Approval
Submission Date JO Letter No. MAR No. IPMT Letter No. Date Manufacturer Start Date Finish Date Start Date Finish Date
(By Owner) (● / ×) Date Date
Date (To JO) (To JO) (To Owner)

THK0.8 Galv. Steel Flashing, H=300mm(Min.)

For Conner Between Floor And Parapet
4) Al.Flashing, THK0.8
Including Fixing & Sealant
ASTM B209 or BS EN 573

5) Con'c Tile 400x400x40mm precast concrete tile

7 Painting N/A

26-Aug-2021
Acrylic latex primer + acrylic latex paint
Under Coat : Acrylic latex primer : 25-50 microns
1) Emulsion Paint (Ext. Wall) Finish Coat : Acrylic latex paint : 25-50 microns 1. PT Jotun Indonesia
Minimum 3 coats
DFT shall be as per Manufacturer’s standard

26-Aug-2021
Interior Painting
Masionry Wall : Acrylic latex primer + Water acrylic
2) Emulsion Paint (Int. Wall) eggshell enamel paint 1. PT Jotun Indonesia
- Acrylic latex primer : 25-50 microns
- Water acrylic eggshell enamel paint : 50 microns

26-Aug-2021
Interior Painting
Ceiling : Acrylic latex primer + Acrylic latex paint
3) Emulsion Paint (Int. Ceiling) 1. PT Jotun Indonesia
- Acrylic latex primer : 25-50 microns
- Acrylic latex paint : 50 microns

08-Sep-2021
4) Vinyl Acetate Paint For Wall & Ceiling at MCR 1. PT Jotun Indonesia

5) Acid Resistant Paint D.F.T : 300 microns

13-Oct-2021
6) Anti-Dust Epoxy Paint D.F.T : 300 microns 1. PT Zhengou JKT Indonesia

8 Fired Steel & Steel Door

9/24/2021

9/28/2021
1. Shandong Asico Door
Co., Ltd
1) Steel Door 26071-100-3SS-A10-00001, Section 2.24
2. PT Lion Metal Works
Tbk

Underwriters Laboratories (UL), Factory Mutual (FM) 1. Shandong Asico Door

9/24/2021

9/28/2021

label, NFPA 80. Co., Ltd

2) Fired Steel Door
STC rating of 38 or better. 2. PT Lion Metal Works
26071-100-3SS-A10-00001, Section 2.24 Tbk

Blast load & Fire Rating as per drawings

Including all Heavy duty Hardwares and
3) Blast Resistant Door / MCR
Weatherstripping accessories as per Manufacturer's
Standards
9/24/2021

9/28/2021

1. Shandong Asico Door

Stainless steel heavy-duty industrial hardware Co., Ltd
4) Door Hardware
26071-100-3SS-A10-00001, Section 2.10 2. PT Lion Metal Works
Tbk

Stainless steel heavy-duty industrial cylindrical locksets

5) Master key system Including key cabinet
26071-100-3SS-A10-00001, Section 2.10

9 Interior Finish Works

THK. 6.0 mm, Non - Conductive Safety Floor Mat

The rubber shall be provided with test certificate from
01-Sep-2021

26-Sep-2021

manufacture and able to withstand suitable rating

voltage of switchgear & MCC. 1. Xuancheng Bonzer
1) Rubber Mat
Mating shall not impede breaker racking trolleys. Rubber & Plastic Co., Ltd
International Standard : IEC 61111
Substation, Switchgear Voltage : up to 6.6 kV
26070-203-3DR-E04E-J3001-B04, Ch.26.0
24-Sep-2021
14-Jan-2021

1. Xiangli Anti-static
Tate ConCore 1250; standard 2 ft. 0 in.(600mm) square
Decorative Material Co.,
formed steel panels with concrete core, or an approval
2) Raised Floor Ltd
equal.
2. PT Refcor Daya
'26071-100-3SS-A10-00001, Section 2.2
Teknologi

Recessed Angle Frame

1200mm x 1200mm, 3/4 in ( 20mm )
3) Recess Floor Mat
w/ Resilient Vinyl Cushions
26071-100-3SS-A10-00001, Section 2.15
 Material Approval Request Plan (Architectural Work) REV. DATE 11/29/2021

PKG-3 / PT. AGCIA PERTIWI

RDMP Project

Estimated Delivery
FMAR Shop Dwg Fabrication
(On site)
No. Items Description Remarks
Estimated Submission Submission Approval
Approval Date Submission Approval
Submission Date JO Letter No. MAR No. IPMT Letter No. Date Manufacturer Start Date Finish Date Start Date Finish Date
(By Owner) (● / ×) Date Date
Date (To JO) (To JO) (To Owner)

For Dry Area, Armstrong Fine Fissured Onen Plan With

20-Nov-2021
22-Oct-2021

29-Oct-2021
Humiguard Plus Or Approved
600mm X 1200mm X 16mm 1. PT. ARMSTRONG
4) Suspended Ceiling System
Mylar finish, NCR 0.75,CAC 35, AC 170, Light Reflect (SINGAPORE) PTE LTD
0.86, Class A fire rating.
26071-100-3SS-A10-00001, Section 2.27

For Wet Area, Armstrong Fine Fissured Ceramaguard

22-Oct-2021

29-Oct-2021
with HumiGuard Or Approved
600mm X 1200mm X 16mm 1. PT. ARMSTRONG
5) Suspended Ceiling System
Mylar finish, NCR 0.55, CAC 38, Light Reflect 0.82, (SINGAPORE) PTE LTD
with Fire Guard.
26071-100-3SS-A10-00001, Section 2.27

H = 100 rubber cove base,

6) Vinyl Coved Base Manufactured by Roppe Rubber Corporation, or
approved equal.

Removable Carpet for Prayer

7) Carpet Mohawk or an approved equal
26071-100-3SS-A10-00001, Section 2.8

a) Regular and Fire-rated gypsum wallboard

8) Gypsum Board b) Water-resistant gypsum wallboard
'26071-100-3SS-A10-00001, Section 2.12

THK. 50 mm acoustical wall panel, consisting of woven

fabric-surface and mineral fiber substrate.
Panels shall be mounted on block wall or fair faced
concrete ceiling gypsum wall with manufacturer
recommended accessories.
Armstrong Soundsoak Acoustical Wall System or
approved equal.
9) Acoustical Wall Panels Noise Reduction Coefficient (NRC) of 0.65-0.70
Sound Transmission Coefficient (STC) rating shall be
52.
Flame Spread Rating (FSR) of 25 or less when tested
to ASTM E84
Smoke Developed Index (SDI) of 200 or less when
tested to ASTM E84.
26071-100-3SS-A10-00001, Section 2.3

3 1/4 in. thick wall with high density panel faces

machine bonded to metal frames.
44 STC minimum
Class A flame spread rated panels are non-combustible
10) Operable Walls (Folding Partitions)
machine bonded to one-piece, unspliced metal frames.
Heavy duty aluminum track systems with integral metal
soffits.
26071-100-3SS-A10-00001, Section 2.21

10 Exterior Finish Works

THK. 0.7 mm Profiled Metal panel
zinc coated steel conforming to ASTM A 653 SS Grade
37 with G 90 coating or Equivalent.
Exterior : PVDF (70% Polyvinylidene fluoride), 0.8 mil
[20 micron], 3.0 mil [75 micron] nominal Primer
1) Galvanized Steel Sheet Interior : Polyester topcoat and 3.0 mil [75 micron]
w/Flashing primer.
Including accessories (fixing bolts, clips, tacks) :
Stainless steel
Flashing and Trim shall be of 20 gage material
minimum.
26071-100-3SS-A10-00001, Section 2.20

THK. 1.2 mm Galvanized Steel w/ Fluorine Coating.

2) Gutter Including Support and all other accessories for
installing.

3) Roof Drain (Basket Strainer) Size & Type shall refer to Menufacturer Data

L- 50 x 50 x 5 Galv. Angle or Dia. 42.2 mm x 3.56 mm

Galv. Pipe Frame
50 mm x 50 mm - Dia. 3.0 mm Galv. Steel Wire Mesh
w/ PVC Coating as per
ASTM F 668 or Equivalent.
4) Chain Link Wire Fence
Dia. 60.3 mm x 3.91 mm Galv. Pipe for Gate Post.
For Calbe Room & Gas Cylinder
Dia. 60.3 mm x 3.91 mm Galv. Pipe intermediate Post
(if req'd as per length of span)
Personal Gate : Minimum 900 mm Clear Opening and
Locked Device.
Be closed off by bird screen mesh with access gates

Chain Link Wire Fence ( H = 2,000 mm ~ 2,700 mm )

Dia. 60.3 mm x 5.54 mm Galv. Pipe Post @ 3,000
(Approx.)
Dia. 73 mm x 5.16 mm Galv. Pipe for Copner & End
Post.
50 mm x 50 mm - Dia. 3.0 mm Galv. Steel Wire Mesh
5) Chain Link Wire Fence
w/ PVC Coating.
For Transformer Area
Personal Gate : Minimum 900 mm Clear Opening and
Locked Device.
Equipment Gate : 3,000 mm ~ 3,500 mm Clear
Opening and Locked Device.
Including Concrete Work and all Accessories to
Complete the Work.
 Material Approval Request Plan (Architectural Work) REV. DATE 11/29/2021

PKG-3 / PT. AGCIA PERTIWI

RDMP Project

Estimated Delivery
FMAR Shop Dwg Fabrication
(On site)
No. Items Description Remarks
Estimated Submission Submission Approval
Approval Date Submission Approval
Submission Date JO Letter No. MAR No. IPMT Letter No. Date Manufacturer Start Date Finish Date Start Date Finish Date
(By Owner) (● / ×) Date Date
Date (To JO) (To JO) (To Owner)

Galvanized Steel Pipe w/ Fluorine Coating, Dia. 150

6) Downspout
mm Including Strap & All Fixing Materials.

THK. 1.2 mm Galvanized Steel w/ Paint.

7) Water Collection Box
250 mm (w) x 250 mm (d) x 300 mm (h)

11 Steel Works

JIS G3101 SS400 or Equivalent

Including Purlin&Girth and Connection Bolt
1) Galvanized Steel 26071-100-3DR-000-00001, Section 5.2
26071-100-3SS-E15-00001, Ch.2.3
26071-JO-PMC-TQ-00322

PIPE TYPE ASTM A 53 OR EQUIVALENT OR Angle

Type (JIS G3101 SS400/SS540 or Equivalent)
Height = 1.070m from top of flooring,
spacing of h/rail post = max. 2.4 m
2) Steel Handrail
Hand-railing consists of top rail, mid rail and toe-plate.
Hot-dip galvanized as per ASTM 123 and painted as
per RAL 1023
26071-100-S0-000-00002

ladder detail shall be in accordance with ANSI A14.3.

Additional safety rails shall be provided wher laddes
start close to the edge of an elevated platform.
3) Caged Ladder All ladders more than 6000mm above grade or elevated
floors shall be equipped with safety cages.
26070-203-3DR-S04D-J0001, Cl. 4.8.2
26071-100-S0-000-00005, Note 3,4.

THK. 32MM, Hot Dip Galvanized.

SE-32 x 5 Serrated Top Surface Steel Grating
(unit weight : 48.1 kg/m2)
4) Grating Bearing bars spaced at 1-3/16 in.(30 mm) center-to-
center
26070-100-3SS-SS01-J0001, Cl. 2.6
26070-203-3DR-S04D-J0001, Cl. 4.8.6

THK. 6.0 mm Raised Pattern Surface for Non-Slip

conforming to ASTM A786/A786M Pattern 4 or Pattern
5) Checked Plate 5. (Unit weight : 48. 8 kg/m2).
Hot-dip galvanized in accordance with ASTM
A123/A123M and/or SNI 07-7033-2004.

316 Polished Stainless Steel

6) Stainless Steel Handrail
Including fixing accessories, bottom cover flange

Non-Shrink Cement Based Grout

7) Grouting
26070-100-3SS-DB01-J0002 Ch. 2.6

12 Tile works

standard grade unpolished floor 250mm x 250 mm or

size approved by Pertamina
1) Ceramic tile (Floor)
in accordace with SNI 13006 - 2010
26071-100-3SS-A10-00001 Section 2.28

ceramic glazed wall tile

250mm x 300mm or size approved by Pertamina,
2) Ceramic tile (Wall)
in accordace with SNI 13006 - 2010
26071-100-3SS-A10-00001 Section 2.28

Polished Tile / 600 x 600

Laid with Cement and Sand Mortar or Gluing-on with
3) Ceramic tile (Floor) / MCR
Adhesive.
Including Mortar Bed up to 50 mm Thickness.

Porcelain Tile / 600 x 600

Laid with Cement and Sand Mortar or Gluing-on with
4) Homogeneous Tile (Floor) / MCR
Adhesive.
Including Mortar Bed up to 50 mm Thickness.

13 Waterproofing N/A
27-Oct-2021

2 coats 1. PT. FOSROC

1) Liquid Waterproofing
Liquid Resin Based Waterproofing System INDONESIA

14 Al. Window & Glass

YKK Window & Wall System or approved equal.
1) Al. Window
26071-100-3SS-A10-00001, Section 2.32

Ext.Glass THK.6mm / Tinted Gray

Air Gap / THK.10mm
2) Pair Glass
Int.Glass (Clear Laminated / THK.3mm 2 Layers)
26071-100-3SS-A10-00001, Section 2.16

THK. 10 mm Tempered Glass

3) Tempered Glass
Including Installation and all Accessories

15 Misc. Work
1) Sand For Cable Area

2) Gravel For Transformer Yard, Dia. 25~50mm

 Material Approval Request Plan (Architectural Work) REV. DATE 11/29/2021

PKG-3 / PT. AGCIA PERTIWI

RDMP Project

Estimated Delivery
FMAR Shop Dwg Fabrication
(On site)
No. Items Description Remarks
Estimated Submission Submission Approval
Approval Date Submission Approval
Submission Date JO Letter No. MAR No. IPMT Letter No. Date Manufacturer Start Date Finish Date Start Date Finish Date
(By Owner) (● / ×) Date Date
Date (To JO) (To JO) (To Owner)

6" Dia 40 CS Pipe(H=1050mm) filled with concrete.

Base Plate(250x250x13mm / ASTM A572 GR50)
Protection post painted with warning stripes.
3) Steel Bollard
Concrete material is supplied by Contractor.
Civil Standard drawing No. [26071-100-C0-000-00055,
FIXED GUARD POST (GP-3)]

Approx. 1,200 mm (L) x 800 mm (H) -THK. 6.0 mm,

Melamine Plastic Laminate
4) Building Signage Wall Mounted Type
Fire retardant and self-extinguishing
26071-100-3SS-A10-00001, 2.7 Building Signage.

Approx. 100 mm (L) x 250 mm (H) -THK. 6.0 mm,

Melamine Plastic Laminate
5) Room Signage
Fire retardant and self-extinguishing.
26071-100-3SS-A10-00001, 2.7 Building Signage.

Stainless Steel, Aluminium or Brass Stair Non Slip w /

6) Non-slip
PVC Rubber

7) Manhole Cover Galvanized

16 Toilet Compartments & Accearries N/A

450mm x 750mm x 125mm ( W ) Stainless steel
channel framed mirror with a shelf at each lavatory,
1) Mirror w/Glass Shelf
TOTO Indonesia or approved equal.
26071-100-3SS-A10-00001, Section 2.29 & 2.30

Liquid-Soap Dispenser at each lavatory, TOTO

2) Soap Dispensers Indonesia or approved equal
26071-100-3SS-A10-00001, Section 2.29 & 2.30

TOTO Surface Mounted SOAP Dispenser

3) Shower Soap Holder
26071-100-3SS-A10-00001, Section 2.29 & 2.30

Combination hook and rubber-tipped bumper, sized to

prevent door from hitting compartment-mounted
4) Coat & Hat Hooks
accessories.
'26071-100-3SS-A10-00001, Section 2.29 & 2.30

5) Paper Holder 26071-100-3SS-A10-00001, Section 2.29 & 2.30

Shower Curtain w/stainless steel shower rod.

6) Curtain And Curtain Rod
26071-100-3SS-A10-00001, Section 2.29 & 2.30

TOTO Indonesia or approved equal.

7) Waste Bin For Toilet and Locker Room
26071-100-3SS-A10-00001, Section 2.29 & 2.30

TOTO Indonesia or approved equal.

8) Paper Towel Dispenser For Toilet and Locker Room
26071-100-3SS-A10-00001, Section 2.29 & 2.30

Grab Bar at toilets and showers, Stainless Steel Pipes

Including Fixing Materials. Toto Series 36 in. & 42 in.
(900mm & 1065mm) and 1 1/2 in. (42mm) diameter.
9) Grab Bar Install Grab Bars to withstand a downward load of at
least 250 lbf (115kgf), when tested according to ASTM
F446.
26071-100-3SS-A10-00001, Section 2.29 & 2.30

Toto A 100
10) Urinal Partition
26071-100-3SS-A10-00001, Section 2.29 & 2.30

Floor-mounted, overhead braced type, using ‘Sierra

Series 1092‘ solid color reinforced composite finish as
manufactured by Bobrick Corp. or approved equal.
11) Toilet Cubicle Partition
Including 600 mm (W) Clear Opening Cubicle Door w/
Indicator Bolt, Coat Hook etc, and all accessories.
26071-100-3SS-A10-00001, Section 2.30