SANI-21™

PVC SEWER PIPE SPECIFICATION DATA

D3034 & F679 SEWER SPECIFICATION DATA RIEBER JOINT ILLUSTRATION

Diamond gravity sewer pipe 4 inches through 60 inches shall be made of
compounds conforming to material requirements of ASTM D3034 and ASTM F679 in D
accordance with ASTM D1784. Diamond PVC Sewer Pipe meets all the dimensional,
chemical, and physical requirements as outlined in ASTM D3034 and ASTM F679.
A listing to CSA B182.2 is available for most of these sizes. A complete listing by B
t
A
manufacturing plant is available upon request.

The pipe sizes 4 inches through 60 inches are made with an integral bell “water-
tight” joint that meets the requirements of ASTM D3212 and that utilizes a Rieber
gasket system for sealing that meets the requirements of ASTM F477.

Each male end shall be beveled to facilitate joining and referencing marked for
proper insertion depth. Diamond furnished lubricant is to be used in the joining
process.

SANI-21™
PHYSICAL PROPERTIES OF ASTM D3034 & F679
Property ASTM TEST Minimum 12454/12364
PIPE MATERIALS:
PIPE SHALL BE MADE OF PVC PLASTIC HAVING A MINIMUM CELL CLASSIFICATION
OF 12454 OR 12364 AS DEFINED IN SPECIFICATION D1784.
Specific Gravity D792 1.40/1.40
Tensile Strength, psi D638 7,000/6,000
Tensile Modulus, psi D638 400,000/500,000
IZOD Impact Strength, D256 .65ft., lb./in.
SHORT FORM Specification for Diamond PVC Solid-Wall Sewer Pipe SDR 26 or SDR 35 or PS 46 or PS 115
All PVC Solid-Wall Sewer PIpe shall be made of compounds conforming to ASTM D1784 manufactured in
accordance with the material requirements of ASTM D3034 or ASTM F679. All PVC Sewer Pipe must meet
dimensional, chemical, and physical requirements as outlined in ASTM D3034 orASTM F679. Joints shall meet the
requirements of ASTM D3212 and shall be formed using Rieber Technology. PVC Sewer Pipe shall be installed
according to the requirements of ASTM D2321, Uni-Bell’s Uni-Pub 6 and the manufacturer’s recommendations.

15
dpcpipe.com | 1-800-PVC-PIPE
SANI-21™
D3034 & F679 SEWER SPECIFICATION DATA
A B D t t t
Nominal Pipe Size Outside Diameter Bell Socket Diameter Insert Mark Min. Wall Thickness Min. Wall Thickness Min. Wall Thickness
in. (mm) Inches Inches Inches SDR26/PS115 PS75 SDR35/PS46
Inches Inches Inches
D-3034 PIPE DIMENSIONS
4” (100) 4.215 5-1/4 4“ 0.162 0.120
6” (150) 6.275 7-1/2 4-1/8“ 0.241 0.180
8” (200) 8.400 9-7/8 4-7/8“ 0.323 0.240
10” (250) 10.500 12-3/8 5-1/4“ 0.404 0.300
12” (300) 12.500 14-5/8 5-1/2“ 0.481 0.360
15” (375) 15.300 18 6” 0.588 0.437
F-679 PIPE DIMENSIONS
18” (450) 18.701 21-3/4” 7-3/4” 0.671 0.584 0.499
21“ (525) 22.047 25-1/2” 8-1/2” 0.791 0.689 0.588
24“ (600) 24.803 28-3/4” 10” 0.889 0.775 0.661
27“ (675) 27.953 32-1/2” 11-1/8” 1.002 0.874 0.745
30“ ciod (750) 32.000 37-1/4” 13-5/8” 1.148 1.000 0.853
36“ ciod (900) 38.300 43-1/4” 13-7/8” 1.373 1.197 1.021
42“ ciod (1050) 44.500 53” 16-3/4” 1.596 1.391 1.187
48“ ciod (1200) 50.800 60” 16-7/8” 1.822 1.588 1.355
54” ciod (1350) 57.560 67“ 17“ 2.064 1.799 1.535
60” ciod (1500) 61.610 72” 18-1/2” 2.210 1.926 1.643

SANI-21™
LOADING ASTM D3034 & F679 LOADING CHART
Nominal Pipe Size Outside Diameter Bundle *Feet Per Truckload
in. (mm) Inches Quantity
14’ 20’
4” (100) 4.215 69 23,184 24,288
6” (150) 6.275 24/32 10,080 11,264
8” (200) 8.400 18/24 5544/6048 5808/6336
10” (250) 10.500 12/15 3402 3564
12” (300) 12.500 16 2688 2816
15” (375) 15.300 6 1512 1584
18” (450) 18.701 2/3/4/6 1050 1100
21” (525) 22.047 4 672 704
24” (600) 24.803 4 504/672 704
27” (675) 27.953 3 378
30” (750) 32.000 3 378/252
36” (900) 38.300 2 168
42” (1050) 44.500 2 168
48” (1200) 50.800 1 84
54” (1350) 57.560 1 42
60” (1500) 61.610 1 42
Prices are subject to a firm policy of “Price in effect at time of shipment on regular purchases”
“Possession of this page does not constitute an offer of sale”
*Tolerance of +/- 1/4” allowed

16
dpcpipe.com | 1-800-PVC-PIPE