TSB 55L16XMEA Service Manual
TSB 55L16XMEA Service Manual
TSB 55L16XMEA Service Manual
TEVP-2016048
SERVICE MANUAL
55L16XMEA
3.LEAD-FREE SOLDER
4.SAFETY INSTRUCTION
5.SERVICE MODE
6.SOFTWARE UPDATE
7.HOTEL MODE
8.SCHEMATIC DIAGRAM
10.PART LIST
WARNING:
You are requested that you shall not modify or alter the information or data provided
herein without prior written consent by Toshiba. Toshiba shall not be liable to
anybody for any damages, losses, expenses or costs, if any, incurred in connection
with or as a result of such modification or alteration.
THE INFORMATION OR DATA HEREIN SHALL BE PROVIDED "AS IS" WITHOUT ANY
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Toshiba shall not be liable for any damages, losses, expenses or costs, if any,
incurred in connection with or as a result of use of any information or data provided
herein.
2.GREEN PRODUCT PROCUREMENT
Through updating the equipment’s and controlling the raw materials,KTC has the full ability to supply the products which
meet the requirements of ROHS of European Union since May 15th,2006.
Increasing attention is given to issues related to the global environmental.KTC recognizes environmental protection as
a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental
activities. In line with this, KTC pro-actively promotes Green Procurement, and seeks to purchase and use products,
parts and materials that have low environmental impacts.
Green procurement of parts is not only confined to manufacture. The same green parts used in manufacture must also
be used as replacement parts.
3.LEAD-FREE SOLDER
This product is manufactured using lead-free solder as a part of a movement within the consumer products industry at
large to be environmentally responsible. Lead-free solder must be used in the servicing and repair of this product.
The melting temperature of lead-free solder is higher than that of leaded solder by 30ºC to 40ºC . Use of a
soldering iron designed for lead-based solders to repair product made with lead-free solder may result in
damage to the component and or PCB being soldered. Great care should be made to ensure high-quality soldering
when servicing this product especially when soldering large components, through-hole pins, and on PCBs as the
level of heat required to melt lead-free solder is high.
4.SAFETY INSTRUCTION
For your safety, please read the following safety rules and precautions:
1. All maintenance work must be operated by professional personnel.
2. Make sure the working table is well grounded before maintenance, and take sound static prevention measures.
3. Make sure the tools such as soldering iron and screwdriver are in good grounding before maintenance.
4. During the maintenance process, please wear the electrostatic ring to prevent damage to the product by
personal static.
5. Clean the work table before maintenance to avoid scratching shell or screen by hard articles.6. Pay close
attention to warning information on the products during maintenance process.
7. Please set up the product in accordance with product instructions.
8. Only use a dry cloth to clean the circuit during maintenance process.
9. Please check the component model before replacing it. Using of unauthorized parts may
lead to harm such as electric shock, fire or X-ray radiation.
10. When replacing maim board or bus, make are it is inserted at the proper position and incorrect direction,
otherwise the LCD screen may be burnt out.
11. When connecting to high-voltage board, make sure the plug is inserted in place; otherwise
it may lead to sparkle or protection on the screen, disabling display on the screen.
12. When replacing main board or flat cable, please check whether the main board scheme
and software installed are consistent with the screen model.
13. Do not press the wires when installing parts, especially when you install the shielding shell and back cover.14.
Do not block the ventilation hole when installing the product.
15. Please restore the locations of all parts, installing status, component models and all parameter settings to the
status before maintenance.
5. SERVICE MODE
1 Functions
1.1 automatic correction: The first item of ADC ADJUST
1.2 RC (remote control) KEY DESCRIPTION:
1.2.1Press up or down button to choose item
1.2.2Press right button to enter the submenu
1.2.3Press menu button to return to previous menu
1.3 STATEMENT: In this manual, parameters for illustration only, not directly as a reference
parameter set application
3 Factory Hotkey
Press ▲/▼ button, choose FACTORY HOTKEY, then press ◀/▶to set the ON/OFF。
4. Warn up
Press▲/▼ button of RC, to choose Warm up, panel will display R/G/B etc。
4/7
5. ADC
Press ▲/▼ button of RC to choose ADC , then press ENTER into the submenu of ADC
MODE
There are “RGB, YPbPr(SD), YPbPr(HD), SCART” 4 options in MODE. For example,
when select RGB, parameters below will be available for RGB. Press ▲/▼ button to
choose the item below(R-GAIN,G-GAIN,B-GAIN, R-OFFSET,G-OFFSET,B-OFFSET etc.),
and press ◀/▶button to adjust the parameter value.
ADC Tune
This option will automatically adjust the ADC parameters.
6. White balance
Press ▲/▼button of RC to choose WHITE BALANCE, press ENTER button into the
submenu. T
Source: this option to select which source for the parameters below.
TEMPERTURE, press ◀/▶to choose the TEMPERTURE, can select temperature of
picture.
Press ▲/▼ button to choose the items of the mode(R-GAIN,G-GAIN,B-GAIN , R-
OFFSET,G-OFFSET,B-OFFSET etc.),then press ◀/▶button to choose the parameter value.
5/7
7. SHOP Init
Press ▲/▼ button of RC, select SHOP INIT, then press ENTER to choose Restore
Factory(Clear all factory operation memory. Factory Menu will exit)。
8. NVM Reset
NVM Reset, can clean Factory Menu settings history and set all options to the default
values, and F/W version and Project ID information will be displayed.
Blank below.
7/7
press OK to confirm;
Mode
2.4 Pull out USB when upgrading finishes, and then reboot TV。
3. Forced Upgrade
3.1 Copy the software “MERGE.bin” to the root directory of your
4. ISP Upgrade
4.1 Tools
4.4 upgrade
file,as follows :
1.1 Press MENU,select PICTURE menuˈstay on Contrast, Press 1950 to get into the TCL design
menu
1.3 Set 13 Hotel to ON
MAX VOL Set the Max Volume that you can Adjust
POWER VOL Set the default volume for every time you open the TV , the default volume is 20.
POWER CHANNEL Set the default Source for every time you open the TV
8. SCHEMATIC DIAGRAM
24V AMP
24V Bead
D D
LVDS+12V
DC/DC
LVDS+5V
D12V
ST_D5V 3.3V(Tuner)
DC/DC LDO
5V_USB
0R/1206
C
DDR_1V8 (DDR) C
LDO
ST_A3V3
3.3V
CORE_1V15 (CHIP)
DC/DC
B B
EN
Power ON/OFF
Power Off => EN Pin pull Low
Power On => EN Pin pull high
CON401 24V
Tuner_3.3V
1 FB401 FB1206/6A
2 EC401 U401 U405
3 C401 + + EC402 C402 NC/AMS1117-3.3V
MP2303(SOIC8) 5V
4
10nF 100uF/35V C403 10nF 100uF/35V 10nF
5 8 SS BS 1
6 3 2 FB406 NC
GND GND R403 100K GND GND VIN VOUT
7 7 EN IN 2 VOUT 4
8 C434 C438 C437
L401 10uH/3A 12VA C435 C436
9 6 COMP SW 3
D NC/100nF GND NC/100nF NC/22uF/6.3V D
10
GND
R404
11 DIM-PWM C407 C408 C409 5 4 R401 5.6K 1% R402 82K 1% NC/0.1uF NC/10uF
BL_ON FB GND 1
12
100nF NC 2.2nF + EC403 C404 C405 C406
9
GND GND
470uF 100nF 10uF 10uF GND GND GND
R405
22K
6.8K GND
GND GND
CON_SIP_12PIN_2.0MM
GND
GND GND GND GND
A3V3
Imax=350mA A3V3 U404
5V TP7
AMS1117-1.8V
C430 C410 C411
+1.8V/1.5V_DDR
10uF/6.3V 10uF/6.3V 100nF R406 3 2
NC VIN VOUT
VOUT 4
24V 12VA
C440 C441 C442 C443
GND 100R R407 BL_ADJ R418 NC GND
BRI_ADJ R426
10uF/6.3V 100nF 10uF/6.3V 100nF
100R R408 BL_EN 1 1K/1%
C BL_EN C
C412
C413 A3V3 GND GND
10nF 1nF
R427
200R/1% Vo=1.25x(1+Rdn/Rup)
GND GND R425
1K
L402
4.7uH/3.5A/6x6xH4
R417 24K/1% R416 11K/1%
12VA U402 5V TP6 +1.15V_VDDC
MP1653
1 6 R412 47K R414 27K/1% U403
VIN FB GND 1 FB OUT 6
2 5 C418 A3V3
SW EN L403
2 GND EN 5
3 4 R415 30R 1uF/16V
GND BST
3 VIN SW 4
0.8*(1+27/5.1)=5.03V
R413 C427 C428 C429
R410 100K D401 C423 C425 MP1601 1uH/1.5A/3x3xH1.5
B 5.1K/1% C419 C420 C421 C422 22uF/6.3V 100nF NC/22uF/6.3V B
C414 C415 C416 C417 10uF/6.3V 100nF R420 10K
R411 10uF/16V 10uF/16V 100nF 10uF/16V NC/5.1V
10uF/16V 100nF 10uF/16V 27K 100nF C426
R421
100nF NC
GND
GND GND
0.6*(1+11/24)=1.16V
GND
4
U406
3
1.15V MAX 1A
IN LX
GND 2
5 FB EN 1
Mark1 i SMTMARK
Value
Mark2 i SMTMARK GND
Mark3 i SMTMARK
A Mark4 i SMTMARK A
18/27
5 4 3 2 1
HDMI
AVDD_DDR_DATA
HDMI0_RX0N
AVDD_DDR_CMD
HDMI0_RX0N
AVDD5V_MHL_A
HDMI0_RX0P HDMI0_RX0P +1.8V/1.5V_DDR
AVDD_DDR_CMD AVDD_DDR_DATA +1.15V_VDDC VDDC AVDDL_DVI DVDD_DDR
AVDD_MOD_1
HDMI0_RX1N HDMI0_RX1N
DVDD_DDR
AVDDL_DVI
HDMI0_RX1P HDMI0_RX1P
HDMI0_RX2N HDMI0_RX2N
HDMI0_RX2P VDDC
HDMI0_RX2P
HDMI0_CLKN HDMI0_CLKN C523 C524 C525 C526 C527
HDMI0_CLKP HDMI0_CLKP C528 C529 C530 C531 C532 C533 C534
HDMI0_SCL HDMI0_SCL 2.2uF 2.2uF 0.1uF 0.1uF 0.1uF 0.1uF
HDMI0_SDA 10uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF
MHL_CABLE_DET
HDMI0_SDA
Light_Sensor
HDMI3_SDA
HDMI3_HPDIN
HDMI3_SCL
HDMI0_HPDIN
HDMI1_HPDIN
HDMI0_HPDIN
HDMI3_RX2P
HDMI3_RX1P
HDMI1_CLKN
HDMI3_RX2N
HDMI3_RX1N
HDMI3_RX0N
HDMI1_CLKP
HDMI3_RX0P
HDMI3_CLKN
HDMI3_CLKP
HDMI0_HPDIN
HDMI0_SDA
HDMI1_SDA
HDMI0_SCL
HDMI1_SCL
HDMI0_DET
KEY0_IN
HDMI_ARC
HDMI_CEC
HDMI0_DET
HDMI1_RX0N HDMI1_RX0N
HDMI1_RX0P HDMI1_RX0P
HDMI1_RX1N HDMI1_RX1N
HDMI1_RX1P HDMI1_RX1P
D D
HDMI1_RX2N HDMI1_RX2N
130
129
128
127
126
125
124
123
122
121
120
119
118
117
116
115
114
113
112
111
110
109
108
107
106
105
104
103
102
101
100
HDMI1_RX2P U501 A3V3 AVDD_MOD AVDD3P3_VIDEO AVDD_MOD_1 AVDD_DMPLL
99
98
97
HDMI1_RX2P
HDMI1_CLKN HDMI1_CLKN
HDMI1_CLKP
Test
RXCP_B
RXCN_B
AVDD_5V
HOTPLUG_A
HOTPLUG_B
DDCDA_DA
DDCDB_DA
VDDIO_DATA
DVDD_DDR_DATA
VDDIO_DRAM
DDCDD_DA
DDCDA_CL
DDCDB_CL
MHL_DET
SAR1
SAR0
DDCDD_CL
E-PAD
RX2P_D
RX2N_D
RX1P_D
RX1N_D
RX0P_D
RX0N_D
RXCP_D
RXCN_D
AVDDL_DVI_VDDC
ARC
GND
HOTPLUG_D
CEC
AVDD_MOD
VDDC
HDMI1_CLKP
HDMI1_SCL HDMI1_SCL
HDMI1_SDA HDMI1_SDA
HDMI1_HPDIN HDMI1_HPDIN HDMI1_RX0N 1 96 UART_RX C535 C536 C537 C538 C539 C540 C541
HDMI1_DET HDMI1_RX0P RX0N_B DDCA_CK UART_TX
HDMI1_DET 2 RX0P_B DDCA_DA 95
HDMI1_RX1N 3 94 SPI_CSN 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF
HDMI_ARC HDMI1_RX1P RX1N_B SPI_CZ SPI_DO
HDMI_ARC 4 RX1P_B SPI_DO 93
HDMI_CEC HDMI_CEC HDMI1_RX2N 5 92 SPI_CLK
HDMI1_RX2P RX2N_B SPI_CLK SPI_DI
6 RX2P_B SPI_DI 91
HDMI3_RX0N HDMI3_RX0N AVDD_MOD 7 90
HDMI3_RX0P HDMI0_CLKN AVDD_MOD VDDC System_RST VDDC AVDD_AU33 A3V3 AVDD_DADC
HDMI3_RX0P 8 RXCN_A RESET 89
HDMI3_RX1N HDMI3_RX1N HDMI0_CLKP 9 88 IRRX
RXCP_A IRIN
HDMI3_RX1P HDMI3_RX1P
HDMI3_RX2N
MHL HDMI0_RX0N
HDMI0_RX0P
10 RX0N_A MHL_VBUS/PWM1 87 AMP_MUTE
BRI_ADJ
HDMI3_RX2N 11 RX0P_A PWM0 86
HDMI3_RX2P HDMI3_RX2P HDMI0_RX1N 12 85 SPDIF_OUT
HDMI3_CLKN HDMI0_RX1P RX1N_A SPDIF_OUT/GPIO0 PWR_ON/OFF C542 C543
HDMI3_CLKN 13 RX1P_A GPIO1 84
HDMI3_CLKP HDMI3_CLKP HDMI0_RX2N 14 83 BL_EN
HDMI3_SCL HDMI0_RX2P RX2N_A I2S_OUT_SD/GPIO2 PANEL_ON/OFF 0.1uF 0.1uF
HDMI3_SCL 15 RX2P_A GPIO3 82
HDMI3_SDA HDMI3_SDA HSYNC0 16 81 HP_MUTE HP_MUTE
HDMI3_HPDIN BIN0 HSYNC0 I2S_OUT_BCK/GPIO4 LEDG
HDMI3_HPDIN 17 BIN0P I2S_OUT_MCK/GPIO5 80
HDMI3_DET GIN0P 18 79
HDMI3_DET
GIN0N 19
GIN0P
GIN0M
TSUMV56RUU AVDD_MOD
R_ODD[1]/LVB0- 78 RXO0-
AVDD_MOD
VGA Close to MST IC with wide trace RIN0 20 RIN0P R_ODD[0]/LVB0+ 77 RXO0+
VSYNC0 RXO1-
VGA-R
R501 33R C502 47nF RIN0 AVDD3P3_VIDEO
21
22
VSYNC0
AVDD3P3_ADC
TSUMV56RUU-0051 G_ODD[7]/LVB1-
G_ODD[6]/LVB1+
76
75 RXO1+
OTHER
VGA-G
R502
R503
68R
33R
C503
C504
47nF GIN0N
47nF GIN0P
BIN1
GIN1P
23
24
BIN1P
GIN1P
G_ODD[5]/LVB2-
G_ODD[4]/LVB2+
74
73
RXO2-
RXO2+ PWR_ON/OFF PWR_ON/OFF LVDS
R504 33R C505 47nF BIN0 GIN1N 25 72 RXO3-
VGA-B GIN1M G_ODD[3]/LVB3-
RIN1 26 71 RXO3+ HDMI_CEC HDMI_CEC RXO0-
HSYNC0 CVBS0P RIN1P G_ODD[2]/LVB3+ RXE0- RXO0+ RXO0-
VGA-HSYNC 27 CVBS0 G_ODD[1]/LVA0- 70 RXO0+
VGA-VSYNC VSYNC0 VCOM0 28 69 RXE0+ UART_RX RXO1-
VCOM G_ODD[0]/LVA0+ UART_RX RXO1-
CVBS_OUT0 29 68 RXE1- UART_TX RXO1+
CVBS_OUT1 B_ODD[7]/LVA1- UART_TX RXO1+
Close to MST IC with wide trace 30 67 RXE1+ RXO2-
AV AVDD_AU33
HDMI0_DET 31
AVDD_AU33
AUR0
B_ODD[6]/LVA1+
B_ODD[5]/LVA2- 66 RXE2-
USB0_DM
USB0_DM RXO2+ RXO2-
RXO2+
R509 33R C510 47nF CVBS0P HDMI1_DET RXE2+ USB0_DP
GPIO46/I2S_OUT_WS
C
AV-IN 32 AUL0 B_ODD[4]/LVA2+ 65 USB0_DP
C
B_ODD[2]/LVACLK+
B_ODD[3]/LVACLK-
AVDD3P3_DMPLL
R510 68R C511 47nF VCOM0 USB1_DM RXO3-
AVDD3P3_DADC
B_ODD[0]/LVA3+
B_ODD[1]/LVA3-
USB1_DM USB1_DP RXO3+ RXO3-
USB1_DP RXO3+
VDDIO_CMD
CVBS_OUT0
GPIO45/RX1
GPIO44/TX1
AVDD_MOD
LINEOUTR3
LINEOUTR0
LINEOUTL3
LINEOUTL0
CVBS_OUT0 M_SDA
M_SDA
M_SCL
AUVRM
DM_P1
DM_P0
M_SCL
DP_P1
DP_P0
IFAGC
VDDC
VDDC
靠近mstar IC
XOUT
AUR4
AUR5
RXE0-
AUL4
AUL5
VIFM
VIFP
VAG
RXE0-
XIN
BRI_ADJ RXE0+
Audio Line IN AV/VGA BRI_ADJ
PANEL_ON/OFF PANEL_ON/OFF RXE1- RXE0+
RXE1-
BL_EN BL_EN RXE1+
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
HD_LIN1 C512 1uF HD_LIN AMP_MUTE RXE2- RXE1+
HD_LIN1 AMP_MUTE RXE2-
HD_RIN1 C513 1uF HD_RIN RXE2+
HD_RIN1 RXE2+
AV-LINEOUTR
AV-LINEOUTL
MHL_CABLE_DET MHL_CABLE_DET RXEC-
RXEC-
HDMI3_DET
VGA_LIN1 C516 1uF VGA_LIN RXEC+
USB1_DM
USB0_DM
VGA_LIN1 RXEC+
USB1_DP
USB0_DP
VGA_RIN
VGA_RIN1 C515 1uF VGA_RIN VGA_LIN Light_Sensor RXE3-
TUN_IF+
TUN_IF-
HD_RIN
Light_Sensor
AUVRM
HD_LIN
VGA_RIN1
AUVAG
AMP_R
M_SDA
RXE3-
RXEC+
M_SCL
XTALO
AMP_L
RXE3+
RXEC-
IFAGC
LEDG RXE3+
RXE3-
XTALI
LEDG RXE3+
KEY0_IN KEY0_IN
IRRX IRRX
VDDC
VDDC
AVDD_MOD
AVDD_DMPLL
AVDD_DDR_CMD
AVDD_DADC
Audio Line Out
AV-AUOUTL0 AV-LINEOUTL
AV-AUOUTL0
AV-AUOUTR0
AV-AUOUTR0 AV-LINEOUTR SPI NOR FLASH
AMP_L A3V3
AMP_L AMP_R
AMP_R R520 10K
SPDIF_OUT SPDIF_OUT U502
Close to MSTAR IC
8 1 SPI_CSN
SPDIF OUT 7
VDD
HOLD#
CE#
SO 2 SPI_DO
AUVRM SPI_CLK 6 3 SPI_WP
AUVAG
Reset Crystal SPI_DI 5
SCK
SI
WP#
VSS 4
YPBPR Close to MST IC with wide trace FB501 C517 C518 C522
R807 1K C805 1nF XTALIN [12] 0.1uF MX25L3206E
R506 68R C509 47nF GIN1N GZ1005D102CTF 0.1uF 10uF 5V
R507 33R C508 47nF GIN1P 软件必须要做写保护
B YPbPr-Y B
2
CHIP_CONFIG
R514 NC/1K System_RST
X501
3
TUN_IF+
TUN_IF+ 24MHz {PAD_PWM1, PAD_BRI_ADJ}
1
TUN_IF- R513 D501
TUN_IF- NC/100K XTALI 2b 00/01/10:Boot from SPI
NC/BAV99 C521 30pF
R511 10K A3V3
A3V3
1
NOTE:晶体频偏需要小于30PPM
IFAGC R512 10K IF-AGC-T
C519 删除1M电阻! R515 R516
22nF
NC/4.7K NC/4.7K
BRI_ADJ AMP_MUTE
R517 R518
4.7K 4.7K
A A
5V USB trace :
diffenentail 90 R
CON601
D601 0R USB1_VBUS_CON 1
USB0_DM R601 0R VBUS
USB0_DM 2 DM
USB0_DP R602 0R 3
USB0_DP DP
D
4 GND D
C622 + EC601 5 Chassis
100uF/16V 6 Chassis
ESD601 ESD0402
ESD602 ESD0402
10uF/16V
USB/A-B4-09
DGND
DGND DGND
USB trace :
diffenentail 90 R
DGND DGND
C C
CON610
1 VBUS
USB1_DM R656 0R 2
USB1_DM USB1_DP R657 0R DM
USB1_DP 3 DP
4 GND
NC
NC
5 Chassis
6 Chassis
USB trace : USB/A-B4-09
diffenentail 90 R
ESD612
ESD611
DGND
B
DGND DGND
USB trace : B
diffenentail 90 R
CON607
4
RCA_DIP_3P CON603 RCA-AV
5V
1 1 2 2 R623 10K HD_RIN1 HD_RIN1 1 SPDIF OUT(Coaxial)
R621
DGND NC/10R
3
3 4 R624 10K HD_LIN1 HD_LIN1 CON604
3 4 C610 104pF
NC/ESD0402
NC/ESD0402
ESD613
C623 C624 R626 R625 R609 220R
ESD614
SPDIF_OUT 1 IN
D AV D
5 5 6 6
NC/470pF NC/470pF ESD608
12K 12K R627 C612 C602 2
10
VCC
9
8
7
120R
220pF NC/0.1uF
10
9
8
7
7
R611 0R AV-IN DGND DGND
DGND
VIDEO
7
ESD610
C625
4
R622 CON611 DGND
75R NC/47pF NC/AV1-8.4-45 黄 NC/DQT-003/NIKETECH / OPTICAL_V
NC/ESD0402 1
3
CVBS_OUT0 R653 0R/1.8uH 5 1 AV_OUTR L602 0R C607 1uF 100R R610 AV-AUOUTR0
R617 100R C608 1uF L603 0R AV_OUTL 5 1
AV-AUOUTL0 6 6 2 2
NC/47pF
7 7 3 3
NC/470pF
NC/470pF
C705
NC
4 R613 ESD615 C632
ESD609 4 C605 47K
R651 R618 NC/470pF NC NC/470pF
75R 47K
C C
ESD616
C704
NC/47pF
C631
C611
NC CON606
PJ-322黄色 DGND DGND DGND DGND
DGND
DGND
DGND DGND DGND DGND
DGND DGND
AV OUT
L605 0R R648 0R HP_OUTL
C636 C635
HP_OUTR R647 0R L604 0R NC/0.1uF NC/222pF
C634 C633
DGND DGND
NC/222pF NC/0.1uF R649 U601 R650
0R APA2171A 0R C630 NC/1uF AV-AUOUTL0
DGND DGND 1 14
RINP LINP
AMP_R C603 10uF R612 100R 2 13 R619 100R C601 10uF AMP_L
AMP_R RINN LINN AMP_L
DGND R614 NC/100K 3 12 R641 NC/100K C613 1nF DGND
ROUT LOUT
AV-AUOUTR0 C629 NC/1uF C606 C609 NC/220pF 4 11 C614 NC/220pF
1nF GND UVP
B HP_MUTE R616 NC/100R 5 10 R644 R642 NC/12K 5V B
SDN PGND NC/12K
A3V3 6 9 R643
NC/BEAD/0402/30R
VSS VDD NC/4.7K
NC/10uF
NC/0.1uF
C618 C619 7 8
CPN CPP
FB601
R608
100K R660 0R Light_Sensor NC/10uF NC/1uF
C615 NC/1uF DGND
C617
C616
R607 4.7K HP_OUT_JD HP_OUT_JD
C604 DGND DGND
1uF A3V3
CON605 DGND DGND
3 R HP_OUTR
4
5
2 L HP_OUTL
1 GND
R645 ESD606 ESD607 R646
PJ-339
1K 1K
NC/ESD0402 NC/ESD0402
A A
DGND DGND DGND DGND DGND Talent Digital Technology (HK) Company Limited
泰霖数码科技(香港)有限公司
WWW.TALENTS-TECH.COM
Title
AV1/YUV/SPDIF
21/27
5 4 3 2 1
16
ESD603 ESD604 CON609 GND
ESD0402 ESD0402
VGA_DDC_SCL DDCSCL 15 5 DGND
DGND 10 DGND
VGA-VSYNC R630 100R VSIN 14 4 TX
VGA-VSYNC
9 NC
VGA-HSYNC R631 100R HSIN 13 3 VGA_B+ VGA_BIN
VGA-HSYNC VGA-B
8 VGA_B-
VGA_DDC_SDA DDCSDA 12 2 VGA_G+ VGA_GIN
VGA_G- VGA-G
7
R633 R632 R637 100R RX 11 1 VGA_R+ VGA_RIN
VGA_R- VGA-R
6
5V 10K 10K R639 NC
17
C VGA C
GND 75R 75R 75R
R605 R606
4.7K 4.7K GND GND CON602 GND
4
Close to Mstar IC
TX 3
RX RX 2
1 GND GND GND
TX
NC/CON4_2.0MM
DGND
5 5 1 1
VGA_LIN1 VGA_LIN1 R629 10K 6 2
6 2
YPbPr-Y 7 7 3 3
ESD618 4
R655 R654 C628 ESD619 ESD617 4
C627 R658 C626
NC/470pF
12K 12K NC NC/470pF NC/47pF CON608 DGND
NC 75R NC PJ322黄
HDMI1(MHL)CON503
6
7
UX501 RClamp0524P/AZ1045-4F
NC4
NC3 Lin3 4
HDMI0_RX2P
Lin4 5 HDMI0_RX2N
靠近端子放置
HDMI0_RX2P
HDMI0_RX2N
5V
MHL Signal:
CMR:24.57 ~35.54Ω,
DMR:95.3~115
MHL
DGND 8 3 DGND MHL-CD-SENSE R567 0R
GND GND MHL_CABLE_DET
1 HDMI0_RX2P 9 HDMI0_RX1P R532 R533
DATA2+ MHL-CD-SENSE NC2 Lin2 2 HDMI0_RX1N HDMI0_RX1P
10K 10K
DATA2 SHIELD 2 10 NC1 Lin1 1 HDMI0_RX1N
3 HDMI0_RX2N
DATA2- HDMI0_RX1P C514 R566
DATA1+ 4
5 HDMI0_RX0P HDMI0_SCL1 R534 22R 47nF 0R
DATA1 SHIELD HDMI0_RX0P HDMI0_SCL
6 HDMI0_RX1N HDMI0_RX0N HDMI0_SDA1 R535 22R
D DAT1A- HDMI0_RX0N HDMI0_SDA D
7 HDMI0_RX0P HDMI0_CLKP
DATA0+ HDMI0_CLKP
8 HDMI0_CLKN ESD501
DATA0 SHIELD HDMI0_CLKN
9 HDMI0_RX0N ESD502
DATA0- +5V_VBUS
NC
NC
NC
NC
10 HDMI0_CLKP
CLK+
CLK SHIELD 11
12 HDMI0_CLKN NC NC
CLK- CEC R546 R544 HDMI0/5V
20 GND1 CEC 13
21 14 1K 10K 5V
GND2 NC HDMI0_SCL1 DGND DGND R557
22 GND3 SCL 15
23 16 HDMI0_SDA1 HDMI0-HPD R569 100K
GND3 SDA
ESD512
ESD511
ESD514
ESD513
17 ESD515 NC/33R
DDC/CEC GND
3
18 +5V_VBUS HDMI0_DET
+5V POWER HDMI0_DET
19 HDMI0-HPD Q505 1 R545 HDMI0_HPDIN R652
HOT PLUG HDMI0_HPDIN
NC/ESD0402 3904 4.7K R558 U503 NC/10K
HDMI-W 100K
2
MHL_CABLE_DET R565 NC/1K 4 3
DGND DGND DGND DGND DGND EN FLG
DGND 2 +5V_VBUSHDMI0/5V
GND
R568 5 1
HDMI1/5V IN OUT
靠近端子放置 NC/100K C621
C
HDMI2(ARC) 6
7
UX503
NC4
NC3
RClamp0524P/AZ1045-4F
Lin3 4
HDMI1_RX2P
Lin4 5 HDMI1_RX2N HDMI1_RX2P
HDMI1_RX2N
R527 R528
C620
NC/WS4601E-5/TR
NC1uF/6.3V DGND
NC/1uF/10V
C
DGND 8 3 DGND 10K 10K
GND GND HDMI1_RX1P DGND DGND
9 NC2 Lin2 2 HDMI1_RX1N HDMI1_RX1P
CON504 10 NC1 Lin1 1 HDMI1_RX1N
HDMI1_SCL1 R529 22R
HDMI1_SCL
1 HDMI1_RX2P HDMI1_SDA1 R531 22R
DATA2+ UX504 HDMI1_SDA
2 RClamp0524P/AZ1045-4F
DATA2 SHIELD HDMI1_RX2N HDMI1_RX0P ESD503 ESD504
DATA2- 3 6 NC4 Lin4 5 HDMI1_RX0N HDMI1_RX0P
4 HDMI1_RX1P 7
DATA1+ DGND NC3 Lin3 4 DGND
HDMI1_RX0N
DATA1 SHIELD 5 8 GND GND 3
6 HDMI1_RX1N 9 HDMI1_CLKP +5V_VBUS AVDD5V_MHL_A
DAT1A- HDMI1_RX0P NC2 Lin2 2 HDMI1_CLKN HDMI1_CLKP HDMI1/5V NC NC
DATA0+ 7 10 NC1 Lin1 1 HDMI1_CLKN
DATA0 SHIELD 8
9 HDMI1_RX0N
DATA0- HDMI1_CLKP HDMI1/5V DGND DGND R665 NC/5.1R
CLK+ 10
11 R525 R526
CLK SHIELD HDMI1_CLKN R559 1K 10K 连接到有 IC支持MHL port供电pin,靠近IC端
CLK- 12
20 13 CEC 100K
GND1 CEC HDMI_ARC1 HDMI1-HPD
21 GND2 NC 14
22 15 HDMI1_SCL1 HDMI1_DET
GND3 SCL HDMI1_DET
3
23 16 HDMI1_SDA1
GND3 SDA R560 Q503 R530 HDMI1_HPDIN
DDC/CEC GND 17 1 HDMI1_HPDIN
18 HDMI1/5V 100K 3904 4.7K
+5V POWER HDMI1-HPD
19
2
HOT PLUG
B B
HDMI-W DGND
HDMI3 6
UX505 RClamp0524P/AZ1045-4F
HDMI3_RX2P
Lin4 5 HDMI3_RX2N
靠近端子放置
HDMI3_RX2P
HDMI3/5V
CON505
DATA2+ 1 HDMI3_RX2P
DGND
7
8
9
NC4
NC3
GND
NC2
Lin3 4 DGND
GND 3 HDMI3_RX1P
Lin2 2 HDMI3_RX1N
HDMI3_RX2N
HDMI3_RX1P
R537
10K
R538
10K CEC & ARC
DATA2 SHIELD 2 10 NC1 Lin1 1 HDMI3_RX1N
3 HDMI3_RX2N HDMI3_SCL1 R540 22R
DATA2- HDMI3_SCL
4 HDMI3_RX1P HDMI3_SDA1 R539 22R HDMI_ARC1 C554 1uF HDMI_ARC
DATA1+ HDMI3_SDA HDMI_ARC
5 UX506 RClamp0524P/AZ1045-4F
DATA1 SHIELD HDMI3_RX1N HDMI3_RX0P ESD505 ESD506
DAT1A- 6 6 NC4 Lin4 5 HDMI3_RX0N HDMI3_RX0P
7 HDMI3_RX0P 7 CEC R536 100R HDMI_CEC
DATA0+ DGND NC3 Lin3 4 DGND
HDMI3_RX0N HDMI_CEC
DATA0 SHIELD 8 8 GND GND 3 HDMI3_CLKP
9 HDMI3_RX0N 9
DATA0- HDMI3_CLKP NC2 Lin2 2 HDMI3_CLKN HDMI3_CLKP HDMI3/5V ESD0402 ESD0402
CLK+ 10 10 NC1 Lin1 1 HDMI3_CLKN
CLK SHIELD 11
12 HDMI3_CLKN DGND DGND
CLK- CEC HDMI3/5V
20 GND1 CEC 13
21 14 R543 R542
GND2 NC HDMI3_SCL1 R561 1K 10K
22 GND3 SCL 15
A 23 16 HDMI3_SDA1 10K A
GND3 SDA HDMI3-HPD
DDC/CEC GND 17
18 HDMI3/5V HDMI3_DET Talent Digital Technology (HK) Company Limited
+5V POWER HDMI3_DET
3
23/27
5 4 3 2 1
Tuner_3.3V
39nH
22nF
22nF
270nH
C807 C803
1uF 100nF
C806
C809
D D
Tuner_3.3V
L805
L806
24
23
22
21
20
19
U801 C804
CON801
TFL
GPIO
VBG
DET2
AVDD
TFH
ANT_JACK 1nF
C801 25
470pF GND GND
4 L801 0R 1 18
L803 RFIN AVDD
2 17 AIF+
C802 GZ1005D102CTF RFIN2 VOP
1
3
2
L802 AIF-
NC/1.8pF 3 TF1 R842 VON 16
XTAL_I
DVDD
AVDD
DVSS
SDA
C C
R802 NC/4.7K M_SCL
CP
7
10
11
12
R803 NC/4.7K M_SDA
SDA_CAN
GND
B GND B
A A
24/27
5 4 3 2 1
52
CON501
RXO0- 1 GND
PAD1
RXO0- RXO0+ DGND CON502 PANEL_VCC
RXO0+ 2 NC
RXO1- 3 39 40
RXO1- RXO1+ NC RXO0+ VCC_12VVCC_12V RXO0-
RXO1+ 4 NC 37 TXO0+ TXO0- 38 1 PANEL_VCC
RXO2- 5 RXO1+ 35 36 RXO1- 2
RXO2- RXO2+ RXO3+ GND RXO2+ TXO1+ TXO1- RXO2- PANEL_VCC
RXO2+ 6 TXE3+ 33 TXO2+ TXO2- 34 3 PANEL_VCC
D RXO3- RXO3- 7 RXEC+ 31 32 RXEC- 4 D
RXO3- RXO3+ TXE3- RXO3+ TXOC+ TXOC- RXO3- PANEL_VCC
RXO3+ 8 GND 29 TXO3+ TXO3- 30 5 NC
RXEC+ 9 27 28 6
RXEC- TXEC+ TXO4+ TXO4- GND
10 TXEC- 25 GPIO3 DCRscl 26 7 GND
RXE0- 11 23 24 8
RXE0- RXE0+ RXO2+ GND SDA MODE GND
RXE0+ 12 TXE2+ 21 SCL LVDS_SEL 22 9 NC
RXE1- RXO2- 13 RXE0+ 19 20 RXE0- 10
RXE1- RXE1+ TXE2- RXE1+ TXE0+ TXE0- RXE1- LD_EN
RXE1+ 14 GND 17 TXE1+ TXE1- 18 11 TXE4+
RXE2- RXO1+ 15 RXE2+ 15 16 RXE2- 12
RXE2- RXE2+ RXO1- TXE1+ RXEC+ TXE2+ TXE2- RXEC- GND R564 RXE3+ TXE4-
RXE2+ 16 TXE1- 13 TXEC+ TXEC- 14 13 TXE3+
RXEC- 17 RXE3+ 11 12 RXE3- NC RXE3- 14
RXEC- RXEC+ RXO0+ GND TXE3+ TXE3- TXE3-
RXEC+ 18 TXE0+ 9 TXE4+ TXE4- 10 15 GND
RXE3- RXO0- 19 7 8 RXEC+ 16
RXE3- RXE3+ TXE0- GND GND RXEC- TXEC+
RXE3+ 20 GND 5 GND GND 6 17 TXEC-
21 NC 3 VCC VCC 4 18 GND
22 1 2 RXE2+ 19
LVDS_SEL VCC VCC GND RXE2- TXE2+
23 NC 20 TXE2-
24 GND GND RXE1+ 21
GND 40PIN-2X20 RXE1- TXE1+
25 GND 22 TXE1-
26 RXE0+ 23
NC RXE0- TXE0+
C 27 VCC 24 TXE0-
C
28 32 PANEL_VCC PANEL_VCC 25
GND VCC SHELL 3D_LR_OUT/PWM
29 VCC 26 3D_EN
PANEL_VCC 30 VCC SHELL 31 27 TXO4+
28 TXO4-
FPC-3660Y2-303NE RXO3+ 29
RXO3- TXO3+
30 TXO3-
GND 31
RXEC+ GND
32 TXOC+
RXEC- 33 TXOC-
34 GND
5V RXO2+ 35
12VA Q501 PANEL_VCC RXO2- TXO2+
36 TXO2-
AO3401 RXO1+ 37
RXO1- TXO1+
38 TXO1-
R12V R0805/0R 2 3 RXO0+ 39
S D RXO0- TXO0+
40 TXO0-
R5V NC C546 41 GND
G
C544 C545 42 NC
FB7: 5 V R523 NC/10uF/16V 43
1
10K 220nF 100nF NC
B 44 B
FB6: 12 V SMD-C(1005) GND 45
LG_DIM
LVDS_SEL
46 3D_FORMAT1
R524 100K 47
GND GND 3D_VSYNC_IN
48 3D_FORMAT0/SDA/WP
49 SDA/SCL/WP
3
GND 50
PANEL_ON/OFF R522 10K Q502 SCL
PANEL_ON/OFF 1 51 NC
3904
PAD2
R521 C547
2
10K
NC/100nF
53
CON51X1X0.5-HS-L
GND GND
GND
GND
D4
R901 1 2 EC901 NC/100uF
24V GND
NC/4.7K
+
NC/DL4148 R903 NC/47K R906
GND
2
R902 NC/100K
FB901 0R 1 Q901
NC/4.7K NC/MMBT3906
PVCC
3
D D
R904 NC/10K
3
R907
R905 NC/10K
1000pF/50V
0.1uF/50V
1 NC/100K
C910
C911
AMP_MUTE
Q902 + EC902
2
NC/MMBT3904 100uF/35V
GND
GND
U901 APA2622 L901 BEAD/L0805/220R
R919 10K MUTE 1 28 C918
/SD PVCCL
NC
2 27 GND
PVCC C901 0.22uF /FAULT PVCCL C912 0.22uF 1nF/50V
L_IN 3 LINP BSPL 26
C902 0.22uF 4 25 C919
R908 10 LINN OUTPL CON902
C923
GANI0 5 24 GND
GANI1 GANI0 PGND L902 1nF/50V GND L+
6 GAIN1 OUTNL 23 1
C GND AVCC 7 22 C913 0.22uF L- 2 C
GND AVCC BSNL
C903 1uF/35V 8 21 C914 0.22uF BEAD/L0805/220R
C904 1uF/16V GVDD AGND BSNR L903 BEAD/L0805/220R 2X2.54MM
9 GVDD OUTNR 20
NC
PLIMIT 10 19 GND C920
AVCC GVDD PLIMIT PGND
C906 0.22uF 11 18
C907 0.22uF RINN OUTPR C915 0.22uF 1nF/50V
R_IN 12 RINP BSRP 17
13 16 C921
GND
NC PVCCR
C929
14 15 PVCC 2X2.54MM
PBTL PVCCR 1nF/50V GND R- 2
R909 R911 R913 R+ 1
29
10K 5.6K L904 BEAD/L0805/220R
NC
1000pF/50V
GND CON901
0.1uF/50V
C917
C916
+ EC903
GANI0
GANI1
PLIMIT 100uF/35V
GND
A3V3
CON507 5V
1 R553 NC
2 IR R547 220R IRRX IRRX
3
4 LED_G A3V3
5 KEY R549 NC/0R
D D
6
ESD508
CON6_2.0MM C548 C549 C550 R548
NC/10K
NC/100nF 100PF 100nF
NC/ESD0402
LED_G R550 100R LEDG LEDG
GND GND GND GND
A3V3
ESD510
R551
NC/10K
R556
NC/10K NC/ESD0402
R554 NC Light_Sensor
GND
ESD509
C C553 R563 C
NC/10K
NC
NC/ESD0402
GND GND
A3V3
A3V3 R552
CON506 47K
100nF
CON4_2.0MM ESD0402
1
GND
GND GND
Terms:
IR: Infrared Receiver
RC: Remote Control
IR logic: IR blink with RC action
LVDS: Low Voltage Differential Signal, output from processor and input for panel
O/C: Open Cell, panel with source board
BL: Back Light, light source for panel module
LB: LED (Light Emitting Diode) Bar, light source for BL module
VBL: Voltage for Back Light (before Boost)
VLED: Voltage for LED (after Boost)
OVP: Over Voltage Protection
OSD: On Screen Display
AMP: Amplifier
1.No power
No power LED, RC or Key can not turn on TV. Power LED no light/no change.
2.No Display / Black Panel
Back light is OK, sound is OK, but no picture.
3.No back light
Power LED logic OK, sound OK, but no picture(Different from No Display).
4.No sound
One or all signal source without sound.
5.Signal source no function
One or several source no function.
6.Abnormal Display
OSD NG or picture NG.
11.SET ID AND PANEL ID
BB : Week
WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13
And So
01 02 03 04 05 06 07 08 09 10 11 12 13
The Week Include 4th/Jan Is WK01
CCC : SET ID
In SET ID Sheet
When The Serial Number Was Limit 99, The Next Number Is Returned From 01
D : Country No.
A : Egypt
E : Line No.
Line 1 Line 2 Line 3 Line 4
1 2 3 4
GG : Panel ID
AUO CMI IPS SAM LPL/LGD CPT SHARPVESTELKONKA KTC SKYWORTH TCL BOE
A1 C1 H1 K1 L1 P1 S1 V1 H1 T1 W1 B1 E1
When The Panel Version Is Updated Within The Same Panel Vendor, The Last Digit Will Be Incremented By 1
REV. 01
Dec./15/2016