User’s Guide

L204WT
L204WTM
L204WTQ
L204WTX

Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.

See the label attached on the product and give the information to your
dealer when you ask for service.
Important Precautions

This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.

The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.

Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.

Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.

Do not Open the Display.

There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.

To Avoid Personal Injury :

Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the product screen.
It can cause injury to human, problem to product and damage the display.

To Prevent Fire or Hazards:

Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock.

A1
Important Precautions

On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.

Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release of
heat generated during operation. If these openings are blocked, built-up heat can
cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Main power breaker is the power cord and this breaking device must be located at
a location where it is easy to operate.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.

Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.

On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.

On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.

A2
 Connecting the speakers - The feature is only for speaker models - L204WTM

Connecting the speaker

1. Place the monitor with its front facing downward on a soft cloth.
2. nsert the protruding hook of the speaker in the direction of the slot in the back of the product.

Slot

Hook
Audio DC-In AUDIO IN
Cable

3. After setting up the speaker, connect the Audio DC-In Cable to the back of the product.
@B,HM CB,NTS C,RTA CUH,C CB,NTS C,RTA CUH,C @B,HM

DC-OUT

@B,HM CB,NTS C,RTA CUH,C CB,NTS C,RTA CUH,C @B,HM

@B,HM CB,NTS C,RTA CUH,C

A3
Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.

Connecting the stand

1. Place the monitor with its front facing downward on a soft cloth.
2. Assemble the Stand Body into the product in the correct direction as shown in the picture.
Make sure you push it until you hear it “ click” .

REAR

3. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.
4. Once assembled take the monitor up carefully and face the front side

REAR
FRO
NT
REAR
REAR

FRO
NT

Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.

A4
Connecting the Display

To remove the Stand:

1. Put a cushion or soft cloth on a flat surface. 2. Place the monitor face down on
the cushion or soft cloth.

The Head part

The Stand
base part

3. Hold the product as it follows and lift up the Stand slightly.

4. Change your hold on the product as it follows and turn the Stand Base in the arrow
direction.

5. Pull out the Stand to remove.

A5
Connecting the Display

To remove the Stand Base:

Type. A
1. Ensure there are two short and two long 2. Hold the body of the Stand as it follows.
latches at the bottom of the Stand Base.

3. Press inside the two long latches at the 4. Keep pressing the two latches and use the other
hand to hold the body of the Stand to push the
same time with your strength as it follows. Stand Base in the arrow direction to remove.

5. The body of the Stand and the Stand Base are successfully separated.

A6
Connecting the Display

To remove the Stand Base:

Type. B
1. Ensure there are four latches at the 2. Hold the body of the Stand as it follows.
bottom of the Stand Base.

3. Press inside the four latches individually toward each end.

4. Put the Stand Base on a flat surface and pull 5. The body of the Stand and the Stand
up the body of the Stand while holding the Base are successfully separated.
Stand Base with the other hand. to remove.

A7
Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.

Positioning your display

1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚~20˚

20

W arning: When adjusting the angle of the screen, do not

put your f inger(s) in bet w een t he head of t he
monitor and the stand body. You can hurt your
finger(s).

Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing
position, the forward tilt angle of the monitor should not exceed 5 degrees.

A8
Connecting the Display

Using the Computer

1. Place the monitor in a convenient, well-ventilated location near your computer.
2. Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection. 1
3. Connect the power cord into a proper power outlet that is easily accessible and close to
the display. 2

Signal Cable
Analog signal Digital signal
NOTE Power Cord D-sub DVI
This is a simplified representation
of the rear view.
This rear view represents a
general model; your display may
differ from the view as shown.

Varies according to model.

Wall-outlet type

PC-outlet type

Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector on
the supplied cable to a 15 pin 2 row connector.

DVI-D(This feature is not available in all countries.)

4. Press button on the front switch panel to turn the power on.
When monitor power is turned on, the 'Self Image Setting
Function' is executed automatically.
(Only Analog Mode)

NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push the
‘AUTO/SET’ button on the front panel of the monitor. Otherwise, you may execute the ‘ Factory reset’ option on the
OSD adjustment menu. However, be aware that this option initializes all the menu items except ‘Language’.

A9
Using the speakers - The feature is only for speaker models - L204WTM

Side Jack
Headphone/Earphone Input
Automatically mutes the speaker volume
when the headphones are plugged in.

Rear
Audio Input
Connects to the *LINE OUT jack of the
PC sound card.

*LINE OUT
AUDIO A terminal used to connect to the
IN
speaker including a built-in amplifier
(Amp). Make sure that the connecting
terminal of the PC sound card is checked
before connecting. If the Audio Out of PC
sound card has only Speaker Out,
reduce the PC volume.
If the Audio Out of the PC sound card
supports both Speaker Out and Line Out,
convert to Line Out using the card
Speaker Out jumper of the program (Refer to the
Sound Card Manual).

*Line Out

<Jack of the PC sound card>

A10
Control Panel Functions

Front Panel Controls Back

Control Function

MENU Button Use this button to enter or exit the On Screen Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.

Use these buttons to select or adjust functions in the On

Buttons
Screen Display.

: For more information, refer to page A19.

SOURCE Hot key Use this button to make D-Sub or DVI connector active.
This feature is used when two computers are connected
to the display. The default setting is D-Sub.

A11
Control Panel Functions

Control Function

AUTO/SET Use this button to enter a selection in the On Screen

Button Display.

AUTO IMAGE ADJUSTMENT

When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
20.1 inch monitor : 1680 x 1050

Power Button Use this button to turn the display on or off.

Power Indicator This Indicator lights up blue when the display

operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes
to amber.

A12
On Screen Display (OSD) Control Adjustment

Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system.
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.

NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.

To make adjustments in the On Screen Display, follow these steps:

Press the M ENU Button, then the main menu of the OSD appears.

To access a control, use the or Buttons. When the icon you want
becomes highlighted, press the AUTO/SET Button.

Use the / Buttons to adjust the image to the desired level. Use the
AUTO/SET Button to select other sub-menu items.

Push the M ENU Button once to return to the main menu to select another
function. Push the M ENU Button twice to exit from the OSD.

A13
On Screen Display(OSD) Selection and Adjustment

The following table indicates all the On Screen Display control, adjustment,
and setting menus.

Main menu Sub-menu A D Reference

PICTURE BRIGHTNESS To adjust the brightness,
CONTRAST contrast and gamma of the
screen
GAMMA
sRGB
COLOR To customize the color of
PRESET 6500K the screen
9300K
RED
GREEN
BLUE
HORIZONTAL To adjust the position of the
POSITION screen
VERTICAL
CLOCK
To improve the clarity and
TRACKING PHASE stability of the screen
SHARPNESS
LANGUAGE
SETUP To customize the screen
OSD HORIZONTAL status for a user's operating
POSITION VERTICAL environment
WHITE BALANCE
POWER INDICATOR
4:3 IN WIDE
FACTORY RESET
FLATRON MOVIE / TEXT
To select or customize
F-ENGINE USER desired image settings
NORMAL
: Adjustable
A : Analog Input
D : Digital Input

NOTE
The order of icons may differ depending on the model (A14~A19 ).

A14
On Screen Display(OSD) Selection and Adjustment

You were introduced to the procedure of selecting and adjusting an item

using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.

Press the MENU Button, then the main menu of the OSD appears.

Menu Name PICTURE

Sub-menus
Icons

Button Tip
MENU : Exit
: Adjust (Decrease/Increase)
SET : Enter
: Select another sub-menu

NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.

A15
On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

PICTURE
PICTURE BRIGHTNESS To adjust the brightness of the screen.

CONTRAST To adjust the contrast of the screen.

GAMMA Set your own gamma value. : -50/0/50

On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu

COLOR
COLOR PRESET • sRGB: Set the screen color to fit the
SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
RED
Set your own red color levels.
GREEN
Set your own green color levels.
MENU : Exit
: Decrease BLUE
: Increase Set your own blue color levels.
SET : Select another sub-menu

A16
On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

POSITION
POSITION HORIZONTAL To move image left and right.

VERTICAL To move image up and down.

MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu

TRACKING

TRACKING CLOCK To minimize any vertical bars or stripes

visible on the screen background.
The horizontal screen size will also
change.

PHASE To adjust the focus of the display.

This item allows you to remove any
horizontal noise and clear or sharpen
MENU : Exit the image of characters.
: Decrease
: Increase SHARPNESS To adjust the clearness of the screen.
SET : Select another sub-menu

A17
On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

SETUP LANGUAGE To choose the language in which the

control names are displayed.
SETUP
OSD To adjust position of the OSD window
POSITION on the screen.

WHITE If the output of the video card is different

BALANCE the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
SETUP
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
POWER Use this function to set the power
INDICATOR indicator on the front side of the monitor
MENU : Exit to ON or OFF.
: Adjust If you set OFF, it will go off.
: Adjust
SET : Select another sub-menu If you set ON at any time, the power
indicator will automatically be turned on.
4:3 IN WIDE To select the image size of the screen.

WIDE 4:3

* 4:3 : Depending on the input video signal ratio,

it is automatically changed to an optimized screen
ratio. (The 1280X1024 input signal is changed
to 5:4 ratio and 1024X768 to 4:3.)
Resolution Screen ratio
1280x1024 5:4
1152x864 4:3
1024x768 4:3
800x600 4:3
640x480 4:3
720x480 3:2
The input signal which the 4:3 IN WIDE does not support '4:3' is the
following.
- The 20,1 inch monitor is 720x400,1280x768,1360x768, 1680x1050
FACTORY Restore all factory default settings except
RESET "LANGUAGE."
Press the button to reset immediately.
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal.

A18
On Screen Display(OSD) Selection and Adjustment

The OSD screen will appear when you touch the button
on the right side of the monitor.
Menu Name

Icons

Sub-menu Name

FLATRON F-ENGINE Screen when applied Screen when not applied

When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear on the left side, whereas the non-applied
screen will appear on the right side.Touch the SET
button to use the adjusted screen.

Main menu Sub menu Description

MOVIE This feature lets you easily select the best desired
TEXT image condition optimized to the environment
(ambient illumination, image types etc).
MOVIE: For animation images in videos or movies
TEXT: For text images (Word processing etc.)

USER User
You can manually adjust brightness, ACE or RCM.
You can save or restore the adjusted value even
when using a different environment.
To adjust the USER sub-menu function, ...
Press the SET Button (Brightness): Adjusts screen brightness.
...ACE(Adaptive Clarity Enhancer): Selects the clarity mode.
...RCM(Real Color Management): Selects the color mode.
0 Not applied
1 Green enhance
2 Flesh tone
3 Color Enhance

Select the SAVE sub-menu using the SET button

and save the YES value using the buttons.

NORMAL This is under normal operating conditions.

A19
Troubleshooting

Check the following before calling for service.

No image appears
● Is the power cord of the • Check and see if the power cord is connected
display connected? properly to the power outlet.

● Is the power indicator • Press the Power button.

light on?

● Is the power on and the • Adjust the brightness and the contrast.
power indicator blue or
green?

● Is the power indicator • If the display is in power saving mode, try moving
amber? the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.

● Do you see an "OUT OF • This message appears when the signal from the
RANGE" message on PC (video card) is out of horizontal or vertical
the screen? frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.

● Do you see a "CHECK • This message appears when the signal cable
SIGNAL CABLE" between your PC and your display is not
message on the connected. Check the signal cable and try again.
screen?

Do you see a "OSD LOCKED" message on the screen?

● Do you see “OSD • You can secure the current control settings,
LOCKED” when you so that they cannot be inadvertently changed.
push MENU button? You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message
“OSD UNLOCKED” will appear.

A20
Troubleshooting

Display image is incorrect

● Display Position is • Press the AUTO/SET button to automatically
incorrect. adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.

● On the screen • Press the AUTO/SET button to automatically

background, vertical adjust your display image to the ideal setting.
bars or stripes are If the results are unsatisfactory, decrease the
visible. vertical bars or stripes using the CLOCK icon in
the on screen display.

● Any horizontal noise • Press the AUTO/SET button to automatically

appearing in any adjust your display image to the ideal setting.
image or characters If the results are unsatisfactory, decrease the
are not clearly horizontal bars using the PHASE icon in the on
portrayed. screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).

Important
Check Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.

The setting method can differ by computer and O/S (Operation System),
and resolution mentioned above may not be supported by the video card
performance. In this case, please ask to the computer or the video card
manufacturer.

A21
Troubleshooting

Display image is incorrect

● The screen color is • Check if the signal cable is properly connected
mono or abnormal. and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.

● The screen blinks. • Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.

Have you installed the display driver?

● Have you installed the • Be sure to install the display driver from the display
display driver? driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.

● Do you see an • Make sure to check if the video card supports

"Unrecognized monitor, Plug&Play function.
Plug&Play (VESA DDC)
monitor found"
message?

A22
Specifications L204WT/L204WTQ/L204WTX

Display 20.1 inches (51.1 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
20.1 inches viewable
0.258 mm pixel pitch
Sync Input Horizontal Freq. Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital
Video Input Signal Input 15 pin D-Sub Connector
DVI - D connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Resolution Max Analog : VESA 1680 x 1050 @ 60 Hz
Digital : VESA 1680 x 1050 @ 60 Hz
Recommend VESA 1680 x 1050 @60 Hz
Plug&Play DDC 2B
Power 0n Mode : 45W(Typ.)
Consumption Sleep Mode ≤ 1W
Off Mode ≤ 1W
Dimensions With Stand Without Stand
&Weight Width 46.62 cm / 18.35 inches 46.62 cm / 18.35 inches
Height 38.40 cm / 15.11 inches 30.54 cm / 12.02 inches
Depth 22.60 cm / 8.89 inches 6.46 cm / 2.54 inches
Net 4.8 kg (10.58 lbs)
Tilt Range Tilt -5˚~20˚
Power Input AC 100-240V~ 50/60Hz 1.0A
Environmental Operating Conditions
Conditions Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Stand Base Attached ( ), Detached ( O )
Power cord Wall-outlet type or PC-outlet type

NOTE
Information in this document is subject to change without notice.

A23
Specifications L204WTM

Display 20.1 inches (51.1 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
20.1 inches viewable
0.258 mm pixel pitch
Sync Input Horizontal Freq. Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green) Digital
Video Input Signal Input 15 pin D-Sub Connector
DVI - D connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Resolution Max Analog : VESA 1680 x 1050 @60 Hz
Digital : VESA 1680 x 1050 @60 Hz
Recommend VESA 1680 x 1050 @60 Hz
Plug&Play DDC 2B
Power 0n Mode : 45W(Typ.)
Consumption Sleep Mode ≤ 1W
(without speaker) Off Mode ≤ 1W
Dimensions With Stand Without Stand
&Weight Width 46.62 cm / 18.35 inches 46.62 cm / 18.35 inches
Height 38.40 cm / 15.11 inches 30.54 cm / 12.02 inches
Depth 22.60 cm / 8.89 inches 6.46 cm / 2.54 inches
Net 4.8 kg (10.58 lbs)
Tilt Range Tilt -5˚~20˚
Power Input AC 100-240V~ 50/60Hz 1.0A
Environmental Operating Conditions
Conditions Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Stand Base Attached ( ), Detached ( O )
Power cord Wall-outlet type or PC-outlet type
Audio RMS Audio Output 1W+1W(R+L)
Input Sensitivity 0.7Vrms
Speaker Impedance 16Ω

NOTE
Information in this document is subject to change without notice.

A24
Specifications

Preset Modes (Resolution)

Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)

1 720 x 400 31.468 70

2 640 x 480 31.469 60
3 640 x 480 37.500 75
4 800 x 600 37.879 60
5 800 x 600 46.875 75
6 1024 x 768 48.363 60
7 1024 x 768 60.123 75
8 1152 x 864 67.500 75
9 1280 x 1024 63.981 60
10 1280 x 1024 79.976 75
*11 1680 x 1050 64.674 60
**12 1680 x 1050 65.290 60

* Digital Recommend Mode

** Analog Recommend Mode

Indicator
MODE LED Color

On Mode blue
Sleep Mode amber
Off Mode Off

A25
Specifications

Signal Connector Pin Assignment

1 8
9 16
17 24

DVI-D Connector
Pin Signal(DVI-D) Pin Signal(DVI-D)
1 T. M. D. S. Data2- 16 Hot Plug Detect
2 T. M. D. S. Data2+ 17 T. M. D. S. Data0-
3 T. M. D. S. Data2/4 Shield 18 T. M. D. S. Data0+
4 T. M. D. S. Data4- 19 T. M. D. S. Data0/5 Shield
5 T. M. D. S. Data4+ 20 T. M. D. S. Data5-
6 DDC Clock 21 T. M. D. S. Data5+
7 DDC Data 22 T. M. D. S. Clock Shield
8 Analog Vertical Sync. 23 T. M. D. S. Clock+
9 T. M. D. S. Data1- 24 T. M. D. S. Clock-
10 T. M. D. S. Data1+
11 T. M. D. S. Data1/3 Shield
12 T. M. D. S. Data3-
13 T. M. D. S. Data3+
14 +5V Power
15 Ground (return for +5V,
H. Sync. and V. Sync.)
T. M. D. S. (Transition Minimized Differential Signaling)

A26
Installing the Wall mount plate
This monitor satisfies the specifications of the Wall mount plate or
the interchange device.
1. Put a cushion or soft cloth on a flat surface. 2. Place the monitor face down on
the cushion or soft cloth.

The Head part

The Stand
base part

3. Hold the product as it follows and lift up the Stand slightly.

4. Change your hold on the product as it follows and turn the Stand Base in the arrow
direction.

5. Pull out the Stand to remove.

A27
Installing the Wall mount plate

6. Install the Wall mount plate.

Wall mount plate(Separate purchase)

This is stand-type or will mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount plate is
purchased.

Kensington Security Slot

Connected to a locking
cable that can be purchased
separately at most
computer stores

A28
Digitally yours