Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 75 views

    R Max PC QT

    Uploaded by

    akbar davoodi
    R-MAX PC QT is an 80% alumina castable suitable for severe abrasion areas. It can withstand temperatures up to 3200°F and has an average abrasion loss of 4.0 cc after firing to 1500°F. The castable has a bulk density of 170 pcf and compressive strength of 18,500 psi after 1500°F firing. It also maintains low permanent linear change from green to final heat treatment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    R Max PC QT

    Uploaded by

    akbar davoodi
    75 views1 page
    R-MAX PC QT is an 80% alumina castable suitable for severe abrasion areas. It can withstand temperatures up to 3200°F and has an average abrasion loss of 4.0 cc after firing to 1500°F. The castable has a bulk density of 170 pcf and compressive strength of 18,500 psi after 1500°F firing. It also maintains low permanent linear change from green to final heat treatment.

    Original Title

    r-max-pc-qt

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    R-MAX PC QT is an 80% alumina castable suitable for severe abrasion areas. It can withstand temperatures up to 3200°F and has an average abrasion loss of 4.0 cc after firing to 1500°F. The castable has a bulk density of 170 pcf and compressive strength of 18,500 psi after 1500°F firing. It also maintains low permanent linear change from green to final heat treatment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    75 views1 page

    R Max PC QT

    Uploaded by

    akbar davoodi
    R-MAX PC QT is an 80% alumina castable suitable for severe abrasion areas. It can withstand temperatures up to 3200°F and has an average abrasion loss of 4.0 cc after firing to 1500°F. The castable has a bulk density of 170 pcf and compressive strength of 18,500 psi after 1500°F firing. It also maintains low permanent linear change from green to final heat treatment.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    PRODUCT DATA

    Brand Name: R-MAX PC QT


    Description: R-MAX PC QT is a Pumpable, Abrasion-Resistant, 80% Alumina Castable. This castable can be installed by
    vibration casting and pumping methods. Ideal applications for this castable are severe abrasion areas where
    refractory heatup is difficult to control.

    Physical properties shown are average values of samples taken under controlled conditions
    ASTM test methods used where applicable

    Maximum Service Temperature: 3200°F (1760°C)

    Typical Water Required for Mixing (by weight) :


    Pump Cast ……...…. 5.5%

    Pump Cast Data


    Bulk Density (pcf)
    After 1500°F (815°C) 170 (2.72 g/cm3)

    Cold Crushing Strength (psi)


    After 1500°F (815°C) 18,500 (1300 kg/cm2)

    Modulus of Rupture (psi)


    After 1500°F (815°C) 2,600 (182 kg/cm2)

    Permanent Linear Change (%)


    Green to 220°F (105°C) -0.1 to 0.0
    After 1500°F (815°C) -0.4 to 0.0

    Thermal Conductivity (using ASTM C1113)


    Mean Temperature BTU/ft2/hr/°F/inch W/mK
    1000°F (538°C) 17.0 2.46
    1500°F (815°C) 17.2 2.49
    2000°F (1093°C) 17.5 2.53

    Abrasion Loss (using ASTM C-704 Method)


    After 1500°F (815°C) 4.0 cc (average)

    Typical Chemical Analysis (%)


    (Calcined Basis)
    Alumina (Al2O3) ……………….. 81.3
    Silica (SiO2) ……………….. 13.0
    Lime (CaO) ……………….. 1.9
    Iron Oxide (Fe2O3) ……………….. 1.0
    Titania (TiO2) ……………….. 2.4
    Magnesia (MgO) ……………….. 0.2
    Alkalies (Na2O+K2O) ……………….. 0.2

    Standard Packaging: 55 lb bag. 72 bags per pallet. Bulk packaging available.

    Brand Code: 1519


    The properties shown on this data sheet represent typical average results using standard ASTM test methods (unless otherwise noted) conducted under controlled
    condition (using standard rectangular shapes), and should not be considered to be guaranteed specifications. Properties are subject to normal manufacturing
    statistical standard deviation ranges, and Resco Products, Inc. reserves the right to modify the properties and specifications at any time without prior notice.

    RESCO PRODUCTS disclaims any express or implied warranties based on this sheet.

    05/25/18 is the date that this data sheet was updated. Check with your RESCO sales representative or RESCO website to determine you have the current sheet.

    One Robinson Plaza - Suite 300, 6600 Steubenville Pike, Pittsburgh, PA, 15205 Phone: 888-283-5505

    You might also like