This document provides specifications for the DnD150-4H medium head dewatering pump. The pump can pump 600 cubic meters of water per hour to a maximum total dynamic head of 100 meters. Key features include a heavy-duty construction, high chrome wet end materials, a 150 x 200 mm pump size, a maximum speed of 1700 rpm, and oil lubrication. The pump is powered by a Scania or Volvo diesel engine rated at 332 kW and equipped with a flexible coupling, jib crane, priming system, and control panel with monitoring and safety features. The entire unit weighs approximately 6,500 kg dry.
This document provides specifications for the DnD150-4H medium head dewatering pump. The pump can pump 600 cubic meters of water per hour to a maximum total dynamic head of 100 meters. Key features include a heavy-duty construction, high chrome wet end materials, a 150 x 200 mm pump size, a maximum speed of 1700 rpm, and oil lubrication. The pump is powered by a Scania or Volvo diesel engine rated at 332 kW and equipped with a flexible coupling, jib crane, priming system, and control panel with monitoring and safety features. The entire unit weighs approximately 6,500 kg dry.
This document provides specifications for the DnD150-4H medium head dewatering pump. The pump can pump 600 cubic meters of water per hour to a maximum total dynamic head of 100 meters. Key features include a heavy-duty construction, high chrome wet end materials, a 150 x 200 mm pump size, a maximum speed of 1700 rpm, and oil lubrication. The pump is powered by a Scania or Volvo diesel engine rated at 332 kW and equipped with a flexible coupling, jib crane, priming system, and control panel with monitoring and safety features. The entire unit weighs approximately 6,500 kg dry.
This document provides specifications for the DnD150-4H medium head dewatering pump. The pump can pump 600 cubic meters of water per hour to a maximum total dynamic head of 100 meters. Key features include a heavy-duty construction, high chrome wet end materials, a 150 x 200 mm pump size, a maximum speed of 1700 rpm, and oil lubrication. The pump is powered by a Scania or Volvo diesel engine rated at 332 kW and equipped with a flexible coupling, jib crane, priming system, and control panel with monitoring and safety features. The entire unit weighs approximately 6,500 kg dry.
DnD150-4H DnD150-4H 600 M³/hours;100 M TDH Features General drawing Performance curve Pump Baseframe LCC-H150-500.4K AF M1 fabricated structure extra heavy construction steel giw manufacture 2000 liter fuel high chrome wet end material capacity (hardness 600 hbn / 56 hrc)
70 x 84 mm solid free passage
150 x 200 mm pump size 16 bar pressure rating 1700 rpm maximum speed Oil lubrication system gear pump oil capacity 1 lpm Driver 20 l oil tank Scania DC13 074A 331kW external water cooling (450 hp) @ 1800rpm auto control by pump bearing temperature 12.7 litre in-line 6 cylinders 2270 Nm max torque 24 v Suction line rubber suction hose stainless steel strainer (45x45 free passage) lifting boom with Driver 800 kg winch Volvo TAD1343VE 332kW (451 hp) @ 1800rpm Discharge line stainless steel pipe 12.78 litre check valve in-line 6 cylinders swing-check valve 2114 Nm max torque wafer-check valve 24 v flow meter (polyurethane body lining & titanium probe sensor) duty & drain butterfly valve increaser meet with customer pipe Coupling Fexible Tyre F160F Priming system misalignment vacuum pump with dc angle 4° motor max capacity parallel 1.1 ~ 6.6 mm 30 m³/hr (± 2 minutes priming time) 3770 Nm nominal torque vacuum tank integrated 1700rpm maximum speed with floating valve & taper bush no. 4030 separator tank
Control panel hmi display control prime & booster mode auto operating mode emergency operating mode (vacuum pump can be run when Jib crane control panel break down) separately with engine bearing structure panel 360° rotation integrated with standard support maintenance & engine protection installation in lcc pump & dry running protection Unit weight (dry) : ± 6.500 kg suction line (over than 3 minutes) pump bearing temperature protection (over than 110° C) tilt protection (over than 3°) Head Office, Medan Sangatta Factory and Workshop Mandiri Building Lt. 6 Unit 610 Jalan Poros Kabo No. 03 RT. 13 Jl. Timor Block D2-1 MM2100 Jl. Imam Bonjol No. 16D Kel. Swarga Bara, Kec. Sangatta Utara Industrial Town Cibitung Bekasi Medan Sumatera Utara Kab. Kutai Timur 17520, West Java, Indonesia Telp: 0811-940-2855 Telp: 0821 5740 0744 Telp: +62 21 8998 3570 Fax: +62 21 8998 3571 alembang P Nusa Tenggara Jalan Residen Abdul Rozak Telp : 0811 9730 7704 Sales and Marketing Office RT. 006 RW. 002 Kel. Kalidoni, Secure Building, Block B 3rd Floor Kec. Kalidoni, Palembang Makassar Jl. Raya Protokol Halim Perdanakusuma Telp: +62 711 5625 756 5th Floor, Kav. 507, Fajar Graha Pena East Jakarta 13610 Jl. Urip Sumohardjo No. 20, Telp: +62 21 8088 6509 Pekanbaru/Batam Makassar, 90234 Fax: +62 21 8088 6504 Komp. Perkantoran Grand Telp: +62 411 3662152 Sudirman Block D10 Cilegon Jl. Datuk Setia Maharaja Papua Graha Sucofindo Pekanbaru Riau, Indonesia Telp : 0812 1955 0575 Jl. Jend Ahmad Yani No. 106 Telp: +62 811-9440-867 2nd Floor Cilegon Banten 42421 Telp: +62 254 386 467 Balikpapan Fax: +62 254 286 467 Jl. Mulawarman No. 5 RT 023 Kel. Manggar, Semarang Balikpapan Timur 76116 Jl. Raya Walisongo No. 2 Telp: +62 542 771 724 Ruko Tugu Square Kota Semarang Fax: +62 542 771 730 Jawa Tengah 50185 Telp: +62 24 764 32 505 Banjarmasin Fax: +62 24 764 32 505 Jl. A. Yani KM. 17,8 Komplek Pergudangan Surabaya Sumber Baru No. B3 RT 27 RW IX, Ruko Galaxy Sier Kec. Gambut, Kab. Banjar Jl. Rungkut Industri III No. 7F Kalimantan Selatan Surabaya 60291 Telp: +62 511 4770 235 Telp: +62 31 8477 685 Fax: +62 511 4770 236 Fax: +62 31 8477 686
KSB Indonesia Head Office, Cibitung. Telp: 021 89983570 Sales & Marketing Office, Jakarta. Telp: 021 80886509 E-mail: ksbsales@ksb.com ksb.co.id/
