Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 764 views

    Harness Connector: ECM Terminal and Input/Output Signal (M/T)

    Uploaded by

    Alexander Sanchez
    This document provides information about the terminals and input/output signals of an engine control module (ECM). It lists two connectors (A and B) with pin numbers and descriptions of each pin's function. Connector A controls ignition coils, injectors, sensors and other engine components. Connector B provides power, grounds and control outputs for additional sensors, valves and modules.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Harness Connector: ECM Terminal and Input/Output Signal (M/T)

    Uploaded by

    Alexander Sanchez
    764 views4 pages
    This document provides information about the terminals and input/output signals of an engine control module (ECM). It lists two connectors (A and B) with pin numbers and descriptions of each pin's function. Connector A controls ignition coils, injectors, sensors and other engine components. Connector B provides power, grounds and control outputs for additional sensors, valves and modules.

    Original Title

    kia picanto 2007

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about the terminals and input/output signals of an engine control module (ECM). It lists two connectors (A and B) with pin numbers and descriptions of each pin's function. Connector A controls ignition coils, injectors, sensors and other engine components. Connector B provides power, grounds and control outputs for additional sensors, valves and modules.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    764 views4 pages

    Harness Connector: ECM Terminal and Input/Output Signal (M/T)

    Uploaded by

    Alexander Sanchez
    This document provides information about the terminals and input/output signals of an engine control module (ECM). It lists two connectors (A and B) with pin numbers and descriptions of each pin's function. Connector A controls ignition coils, injectors, sensors and other engine components. Connector B provides power, grounds and control outputs for additional sensors, valves and modules.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4

    chematic diagrams

    ECM Terminal and Input/Output signal [M/T]


    1. Harness Connector

    2. Terminal Function [M/T]


    [Connector A]
    Pin No Description
    1 Ignition coil (Cylinder #3) control output
    2 Ignition coil (Cylinder #2) control output
    3 -
    4 Electric Waste Gate Actuator (EWGA) Motor [+] control output
    5 Injector (Cylinder #3) [Low] control output
    6 -
    7 Engine Coolant Temperature Sensor (ECTS) signal input
    8 -
    9 Boost Pressure Sensor (BPS) signal input
    10 -
    11 -
    12 Electric Waste Gate Actuator (EWGA) Feed beck signal input
    13 Throttle Position Sensor (TPS) 1 signal input
    14 Accelerator Position Sensor (APS) 1 signal input
    15 Brake Booster Vacuum Pressure Sensor (BBVPS) signal input
    16 -
    17 Ignition coil (Cylinder #1) control output
    18 ETC motor [+] control output
    19 Electric Waste Gate Actuator (EWGA) DC Motor [-] control output
    20 Injector (Cylinder #2) [Low] control output
    21 Wiper switch signal input
    22 Neutral Switch signal input
    23 -
    24 Camshaft Position Sensor (CMPS) [Bank 1/Exhaust] signal input
    25 A/C dual pressure switch signal input
    26 Vehicle speed signal input
    27 Start signal input
    28 Brake Test switch signal input
    29 Brake Light switch signal input
    30 Clutch switch signal input
    31 Injector (Cylinder #2) [High] control output
    32 Injector (Cylinder #3) [High] control output
    33 -
    34 Injector (Cylinder #1) [Low] control output
    35 Fuel Pressure Control Valve (FPCV) [High] control output
    36 Camshaft position sensor (CMPS) [Bank 1/Intake] ground
    37 Camshaft position sensor (CMPS) [Bank 1/Exhaust] ground
    38 -
    39 -
    40 -
    41 Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2] signal input
    42 -
    43 Battery Sensor Temperature signal input
    44 ISG OFF switch signal input
    45 Electric load signal input [Defrost]
    46 -
    47 Injector (Cylinder #1) [High] control output
    48 ETC motor [-] control output
    49 -
    50 Fuel Pressure Control Valve (FPCV) [Low] control output
    51 Wheel speed sensor [A] signal input
    52 Wheel speed sensor [B] signal input
    53 Crankshaft Position Sensor (CKPS) ground
    54 Crankshaft Position Sensor (CKPS) signal input
    55 -
    56 Camshaft Position Sensor (CMPS) [Bank 1/Intake] signal input
    57 Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2] ground
    58 -
    59 Battery Sensor Current Direct signal input
    60 -

    [Connector B]
    Pin No Description
    1 ECM ground
    2 ECM ground
    3 ECM ground
    4 Battery power (B+)
    5 Battery power (B+)
    6 Battery power (B+)
    7 Battery power (B+)
    8 Accelerator Position Sensor (APS) #1 ground
    9 Manifold Air Temperature Sensor (MAPS) ground
    10 Boost Pressure Sensor (BPS) ground
    11 -
    12 Electric Waste Gate Actuator (EWGA) ground
    13 -
    14 -
    15 -
    16 Engine Coolant Temperature Sensor (ECTS) ground
    17 -
    18 -
    19 -
    20 A/C compressor relay control output
    21 -
    22 CVVT Oil Control Valve (OCV) [Bank 1/Intake] control output
    23 -
    24 Cooling fan PWM control output
    25 -
    26 -
    27 Fuel pump relay control output (With Immobilizer/Smart key)
    28 -
    29 Ignition switch signal input
    30 Accelerator Position Sensor (APS) #2 ground
    31 -
    32 -
    33 Battery sensor ground
    34 -
    35 -
    36 Rail Pressure Sensor (RPS) ground
    37 -
    38 -
    39 -
    40 -
    41 Start relay [Low] control output
    42 -
    43 Accelerator Position Sensor (APS) #2 power (+5V)
    44 Camshaft Position Sensor (CMPS) power (+5V)
    45 -
    46 ISG OFF lamp signal output
    47 -
    48 -
    49 -
    50 CVVT Oil Control Valve (OCV) [Bank 1/Exhaust] control output
    51 Main relay control output
    52 Throttle Position Sensor (TPS) ground
    53 Blower Switch MAX. signal input
    54 -
    55 -
    56 Intake Temperature Sensor (IATS) signal input
    57 Manifold Absolute Pressure Sensor (MAPS) signal input
    58 Knock Sensor (KS) ground
    59 VS+ (NERNST Cell Voltage)
    60 Rc (Compensative Resistance)
    61 LIN communication signal input
    62 -
    63 C-CAN [Low]
    64 Batter sensor power (+5V)
    65 Crankshaft Position Sensor (CKPS) power (+5V)
    66 Accelerator Position Sensor (APS) #1 power (+5V)
    67 Start relay [High] control output
    68 RCV control solenoid valve control output
    69 -
    70 -
    71 Fuel pump relay control output (W/O Immobilizer/Smart key)
    72 -
    73 -
    74 Throttle Position Sensor (TPS) 2 signal input
    75 -
    76 Fuel Level Sensor (FLS) signal input
    77 Accelerator Position Sensor (APS) 2 signal input
    78 Rail Pressure Sensor (RPS) signal input
    79 Knock Sensor (KS) signal input
    80 VS-/IP- (Common Ground for VS, IP)
    81 Rc/Rp (Pump Cell Voltage)
    82 Engine speed signal output
    83 Immobilizer communication line
    84 -
    85 C-CAN [High]
    Manifold Absolute Pressure Sensor (MAPS) power (+5V)
    86 Electric Waste Gate Actuator (EWGA) power (+5V)
    Boost Pressure Sensor (BPS) power (+5V)
    87 Rail Pressure Sensor (RPS) power (+5V)
    88 ETC Module power (+5V)
    89 Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 1] Heater control output
    90 -
    91 Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2] Heater control output
    92 -
    93 -
    94 Purge Control Solenoid Valve (PCSV) control output

    You might also like