Oil & Gas Ratings Guide: Edition 2021 (March)

OIL & GAS
2021 M ARCH
RATINGS GUIDE
E D IT I ON 2 0 2 1 (MA RC H )
OIL & GAS RATINGS GUIDE
Table of Contents
Caterpillar follows a policy of continuous product Table of Contents
improvement. For this reason, some material and Caterpillar: Making Sustainable Progress Possible . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Abbreviations and Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
specifications in the Caterpillar Oil & Gas Ratings Rating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Guide could change without notice. Well Service Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Well Service Engine Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
C2.2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
C4.4 • C4.4 ACERT™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
For more Information about Caterpillar Oil & Gas C6.6 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
and current products, as well as legacy products, C7 ACERT • C7.1 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
C9 ACERT • C9.3 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
please visit: C11 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
C13 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
www.cat.com/oilandgas C15 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
C18 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
C27 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
For Cat® Dealers: Please reference TMI Web for C32 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3512B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
the most current information. 3512C HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3512E • 3512E DGB™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3516C HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Follow Us: Hazardous Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Watercooled Manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-30
Facebook Transmission Application Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
www.facebook.com/catoilandgas CX31-P600 Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
CX38-P892 Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-34
CX48-P2300 Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
LinkedIn TH53-E60 Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
www.linkedin.com/showcase/cat-oil-&-gas CX48-P3060 Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
TH48-E70 Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Twitter TH55-E70 Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
www.twitter.com/catoilandgas TH55-E90 Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
WS255 Quintuplex Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
WS305 Quintuplex Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Sign Up For E-News: Land Drilling Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
C15 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
C18 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45-46
C27 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
C32 ACERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
3
Table of Contents Sustainable Progress
Land Drilling Ratings (continued)
3500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
3500B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
3500C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Caterpillar: Making
3500E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
3512E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Sustainable Progress Possible
Energy Storage System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Drilling Transmission Application Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 A sustainable product life cycle includes efficient and safe
Land Production Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 equipment operation for our customers – and technology for
Diesel Generator Sets – 50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56-57 improved sustainability performance.
Diesel Generator Sets – 60 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-61
Dual Fuel Generator Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Gas Generator Sets – 50 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Gas Generator Sets – 60 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Improvement through fuel diversity
Diesel Engines – Mechanical Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Diesel Fuel Engines – Mechanical Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Delivering customer value with greater operational flexibility
Gas Engines – Mechanical Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 and lower fuel costs is at the heart of our natural gas strategy.
Offshore Drilling and Production Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Dynamic Gas Blending™ (DGB™) technology, for example, has
Hazardous Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 led to the first-ever dual-fuel engine – using both diesel and
3500B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
natural gas – for select Cat® 3500 Series engines. In production
3500C • 3500E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
C175 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 since April 2013 on land drilling, production and well-service
CM20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 applications, the DGB system allows an engine to run on diesel
CM25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 and natural gas simultaneously, with gas substitution rates of up
C280 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-76
CM32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 to 70 percent. In North America the DGB dual-fuel technology
CM34DF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 is available as a retrofit kit. Exported engines are available with
CM43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 DGB dual-fuel capability from the factory, along with retrofit
CM46DF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
kit offerings. The customer benefits are clear: DGB can lower
Gas Compression Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Gas Compression Engine Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
fuel costs by up to 50 percent compared to traditional diesel
G3300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 operation, while providing equivalent performance, as well as
G3400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 the flexibility to run on a wide variety of fuels – from associated
CG137 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
gas to liquefied natural gas (LNG).
G3500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86-87
G3600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88-99
GCM34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Electric Drive Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91-92
Formulas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
4 O I L & G A S R A T I N G S G U I D E 5
Cat Engines Cat Engines
Abbreviations and Definitions
Duty Types
Drill-El . . . . L and electric drilling rating; output available with varying load C . . . . . . . . . F or fire pump, offshore cranes, well service kill pumps,
for an unlimited time. Prime rating in accordance with ISO 8525. cementers, production pumps, and drills – the power and
Typical load factor 60-70% speed capability of the engine which can be used to power
Drill-M . . . . L and mechanical drilling rating; 100% of advertised engine high pressure well service equipment. Also the power and
rating used occasionally, but not over one hour followed by one speed capability of the engine which can be used to power
hour period below 90% load per day for mechanical pumping mud pumps, rotary table, and drawworks through a mechanical
and mechanical drilling applications. Typical load factor 60% drive. For intermittent service where maximum power and/or
speed are cyclic. The maximum average load factor is 70% for
Cont . . . . . . C
ontinuous rating; 100% of engine operating hours at 100% of C32 and smaller engines. The maximum average load factor
rated power for larger engines is 80%. the maximum time at rated load
Prime . . . . . P
rime no overload rating for power generation in oil and gas and speed is not to exceed 50% of the duty cycle, or one hour
applications; output available with varying load for an unlimited continuously, followed by a one hour period below 90% load.
time; output in accordance with ISO 8525. When used as a fire pump and NFPA certification is required,
OS-Prime . . O
ffshore prime rating with 10% overload capability for MCS size the pump power to 90% of the advertised rating.
certification; output available with varying load for an unlimited D . . . . . . . . . F or fire pump, offshore cranes, and portable air compressors –
time; output in accordance with ISO 8525. the power and speed capability of the engine where maximum
MCR . . . . . . M
aximum Continuous Rating (MCR) following reference power is required for periodic overloads. The maximum average
conditions according to the International Association of load factor is 50%, and the maximum time at rated load and
Classification Societies (ACS) for main and auxiliary engines. speed is not to exceed 10% of the duty cycle, or 30 minutes
An overload of 10% is permitted for one hour within 12 hours continuously. When used as a fire pump and NFPA certification
of operation. is required, size the pump power to 90% of the advertised rating.
A . . . . . . . . . F or pumping, ventilation, well service mixing units, and E . . . . . . . . . F or fire pump, offshore cranes, well fracturing, and cementing/
customer specs – the power and speed capability of the engine kill pump – the power and speed capability of the engine which
which can be used to power well service equipment. The can be used to power high pressure well service equipment.
engine can be operated at maximum power and speed for up to For C32 engines and smaller, the maximum average load factor
100% of the time without interruption or load cycling. is 35%. For well fracturing engines, the maximum average load
factor is 50%, and the maximum time at rated load and speed is
B . . . . . . . . . F or oil field mechanical pumping/drilling, independent rotary
less than 2.5 hours per year. For cementing and kill pump
drive, well service blenders, cementers, and stationary plant air
engines, the maximum average load factor is 40%, and the
compressors – the power and speed capability of the engine
maximum time at rated load and speed is less than two hours
which can be used to power well service equipment. The
per year. When used as a fire pump and NFPA certification is
maximum average load factor is 85% of rated engine power. The
required, size the pump power to 90% of the advertised rating.
maximum time at rated load and speed is not to exceed 80% of
the duty cycle, or 4 hour continuously.
*Duty type abbreviations do not apply to model number. *Duty type abbreviations do not apply to model number.
Cat Engines Cat Engines
Emissions Emissions (continued)
CARB . . . . . . . . . . . . . . . C alifornia Air Resources Board IMO I . . . . . . . . . . . . . . . I nternational Maritime Organization (IMO) Tier I
CARB T3 NR . . . . . . . . . California Air Resources Board U.S. EPA Tier 3 NR IMO II . . . . . . . . . . . . . . . International Maritime Organization (IMO) Tier II
Nonroad Equivalent (Not Currently EPA Certified) IMO III . . . . . . . . . . . . . . International Maritime Organization (IMO) Tier III
BSFC . . . . . . . . . . . . . . . . Brake Specific Fuel Consumption Low Emissions . . . . . . . Lean-burn stationary gas-fueled engine without
CCNR . . . . . . . . . . . . . . . Central Commission for Navigation on the Rhine mobile certification
CCNR Stage 2 . . . . . . . . Central Commission for Navigation on the Rhine NC . . . . . . . . . . . . . . . . . . Non-certified
Stage 2 NRM . . . . . . . . . . . . . . . . Nonroad Mobile Certified (40 CFR Part 1048)
China On-hwy IV . . . . . China On-highway Phase IV NRG . . . . . . . . . . . . . . . . Nonroad Genset
China II NRNC . . . . . . . . China Stage II Nonroad and Non-Certified NRNG . . . . . . . . . . . . . . . Nonroad Non-genset
China III NR . . . . . . . . . . China Stage III Nonroad Mobile NSPS Site Compliant . . New Source Performance Standards Site Compliant
Capable
China Phase IV . . . . . . . China Phase IV
Stationary . . . . . . . . . . . Certified for Stationary use (40CFR Part 60)
EPA ESE . . . . . . . . . . . . . EPA Certified for Stationary Emergency Application
UN R96 IIIA . . . . . . . . . . UN Regulation No. 96 Tractor and NRMM Engine
EPA T1 M . . . . . . . . . . . . U.S. EPA Marine Tier 1 Commercial
Emissions Stage IIIA
EPA T1 NR . . . . . . . . . . . U.S. EPA Tier 1 Nonroad Equivalent (Not Currently UN R96 IIIB . . . . . . . . . . UN Regulation No. 96 Tractor and NRMM Engine
EPA Certified) Emissions Stage IIIB
EPA T2 M . . . . . . . . . . . . U.S. EPA Marine Tier 2 Commercial
EPA T2 NR . . . . . . . . . . . U.S. EPA Tier 2 Nonroad Equivalent (Not Currently Engine Configuration
EPA Certified) ATAAC . . . . . . . . . . . . . . ir-to-air Aftercooled
A
EPA T2 NR-1 . . . . . . . . . . EPA Certified for Stationary Emergency Application FMT . . . . . . . . . . . . . . . . Front-mounted Turbochargers
(Emits Equivalent U.S. EPA Tier 2 Nonroad Standards) Haz Loc . . . . . . . . . . . . . Hazardous Location Certified
EPA T3 M . . . . . . . . . . . . U.S. EPA Marine Tier 3 Commercial HD . . . . . . . . . . . . . . . . . . High Displacement
EPA T3 NR . . . . . . . . . . . U.S. EPA Tier 3 NR Nonroad Equivalent (Not Currently REMAC . . . . . . . . . . . . . . Remote-mounted Aftercooler
EPA Certified) RMT . . . . . . . . . . . . . . . . Rear-mounted Turbochargers
EPA T3 NR-1 . . . . . . . . . . EPA Certified for Stationary Emergency Application SCAC . . . . . . . . . . . . . . . Separate-circuit Aftercooler
(Emits Equivalent U.S. EPA Tier 3 NR Nonroad Fuels
Standards) CNG . . . . . . . . . . . . . . . . Compressed Natural Gas
EPA T4F . . . . . . . . . . . . . U.S. EPA Tier 4 Final CRU . . . . . . . . . . . . . . . . . rude Fuel
C
EPA T4f NRG . . . . . . . . . U.S. EPA Tier 4 Final Nonroad Genset Equivalent FG . . . . . . . . . . . . . . . . . . Field Gas
(Certified to U.S. EPA & California ARB Tier 4 Final HFO . . . . . . . . . . . . . . . . . Heavy Fuel Oil
Nonroad Genset Standards) LNG . . . . . . . . . . . . . . . . . Liquefied Natural Gas
EPA T4F NRNG . . . . . . . U.S. EPA Tier 4 Final Nonroad Non-Genset Equivalent MDO . . . . . . . . . . . . . . . . Marine Diesel Oil
(Certified to U.S. EPA & California ARB Tier 4 Final NG . . . . . . . . . . . . . . . . . . Natural Gas
Nonroad Non-Genset Standards)
EPA T4i . . . . . . . . . . . . . . U.S. EPA Tier 4 Interim Performance
EPA T4i NRG . . . . . . . . . U.S. EPA Tier 4 Interim Nonroad Genset Standards bhp . . . . . . . . . . . . . . . . . Brake engine power (horsepower)
(Not Currently EPA Certified) bkW . . . . . . . . . . . . . . . . rake engine power (kilowatt)
B
EPA T4i NRNG . . . . . . . U.S. EPA Tier 4 Interim Nonroad Non-Genset BSFC . . . . . . . . . . . . . . . . Brake Specific Fuel Consumption
Standard (Not Currently EPA Certified) ekW . . . . . . . . . . . . . . . . Generator set electrical output (kilowatt)
EU II NRNC . . . . . . . . . . EU Stage II Nonroad and Non-Certified kVA . . . . . . . . . . . . . . . . . Generator set electrical output (kilo Volt-Amp)
EU IIIA NR . . . . . . . . . . . EU Stage IIIA Nonroad Equivalent (Non-Current for EU) LE . . . . . . . . . . . . . . . . . . Low Emissions
EU IIIB NR . . . . . . . . . . . EU Stage IIIB Nonroad Standards (Non-Current for EU) NA . . . . . . . . . . . . . . . . . . Naturally Aspirated
EU IV NR . . . . . . . . . . . . EU Stage IV Nonroad Standards TA . . . . . . . . . . . . . . . . . . Turbocharged-aftercooled
Cat Engines
Well Service Ratings
Rating Conditions
Diesel Engines –
up to 6.6 liter . . . . . . . A
ll rating conditions are based on ISO/TR14396, inlet air
standard conditions with a total barometric pressure
of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa
(.295 in Hg), and 25°C (77°F). Performance measured
using fuel to specification EPA 2D 89.330-96 with a
density of 0.845-0.850 kg/L @ 15°C (59°F) and fuel inlet
temperature 40°C (104°F).
Diesel Engines –
7 liter and higher . . A
ll rating conditions are based on SAE J1995,
inlet air standard conditions of 99 kPa
(29.31 in Hg) dry barometer and 25°C (77°F)
temperature. Performance measured using a
standard fuel with fuel gravity of 35° API
having a lower heating value of 42 780 kJ/kg
(18,390 btu/lb) when used at 29°C (84.2°F) with a
density of 838.9 g/L.
Gas Engines . . . . . . R
atings are based on SAE J1349 standard
conditions of 100 kPa (29.61 in Hg) and 25°C (77°F).
These ratings also apply at ISO3046, DIN6271, and
BS5514 standard conditions of 100 kPa (29.61 in Hg)
and 27°C (81°F); and API 7B-11C standard conditions
of 99 kPa (29.28 in Hg) and 29°C (85°F) also apply.
Ratings are based on dry natural gas having an LHV
of 35.54 MJ/Nm3 (905 btu/ft3). Variations in altitude,
temperature, and gas composition from standard
conditions may require a reduction in engine From well stimulation and pressure pumping to cementing the well, the
horsepower. well service industry presents a unique set of challenges. Cat engines
meet these challenges with outstanding reliability across a wide range of
ISO 9001:2000 available power. They meet the emissions standards and are backed by
Certification . . . . . . F actory-designed systems built at Caterpillar the expert support of the worldwide Cat dealer network.
ISO 9001:2000 certified facilities.
To find spec sheets referenced in this guide go to:

www.cat.com/oilandgas
Well Service C2.2 W E L L SERVICE
Well Service Engine Ratings

bhp Range Engine Page Number
41.6-66 C2.2 13
72-142 C4.4 • C4.4 ACERT 14
128-275 C6.6 ACERT 15
188-300 C7 ACERT • C7.1 ACERT 16
275-400 C9 ACERT • C9.3 ACERT 17
325-450 C11 ACERT 18 Well Service Ratings
385-520 C13 ACERT 19 Rating Tier bkW bhp rpm Emissions Notes
440-595 C15 ACERT 20 C 31 41.6 2200 EPA T3 NR, Naturally Aspirated
EU IIIA NR
575-800 C18 ACERT 21 C 34.1 45.7 2400 EPA T3 NR, Naturally Aspirated
800-1150 C27 ACERT 22 EU IIIA NR
C 35.7 47.9 2600 EPA T3 NR, Naturally Aspirated,
800-1350 C32 ACERT 23
EU IIIA NR Derate to 31.4 bhp/42.1 bkW
2000-2250 3512B 24 C 37.3 50 2800 EPA T3 NR, Naturally Aspirated
2150-2500 3512C HD 25 EU IIIA NR Derate to 32.8 bhp/43.9 bkW
C 38 51 3000 EPA T3 NR, Naturally Aspirated
2250-3000 3512E 26 EU IIIA NR Derate to 34 bhp/45.6 bkW
3000-3300 3516C HD 27 C 40 53.3 2600 EPA T3 NR, Turbocharged
EU IIIA NR
205-1110 Hazardous Location 28 C 43 57.7 2600 EPA T3 NR, Turbocharged
205-1225 Watercooled Manifold 29 EU IIIA NR
C 44.7 60 2800 EPA T3 NR, Turbocharged
680-1800 Watercooled Manifold 30 EU IIIA NR
C 45.5 61 3000 EPA T3 NR, Turbocharged
EU IIIA NR
C 49.2 66 2800 EPA T3 NR, Turbocharged-Aftercooled
EU IIIA NR
Specifications
L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in3)
NA 661.5 (26) 439 (17.3) 676 (26.6) 184 (406) 2.2 (135)
T, TA 662 (26.1) 489 (19.3) 698 (27.5) 194 (427.7) 2.2 (135)
Bore x Stroke – mm (in) 84 x 100 (3.3 x 3.9)
For diesel engine rating definitions please see page 10.
C4.4 • C4.4 ACERT T M W E L L SERVICE
C6.6 ACERT W E L L SERVICE
Well Service Ratings Well Service Ratings

Rating Tier bkW bhp rpm Emissions Notes Rating Tier bkW bhp rpm Emissions Notes
C4.4 C 95 128 2200 EPA T3 NR, Turbocharged-Aftercooled
C 54 72 2200 EPA T3 NR, Naturally Aspirated EU IIIA NR
EU IIIA NR C 116 156 2200 EPA T3 NR, Turbocharged-Aftercooled
C 56 75 2200 EPA T3 NR, Naturally Aspirated EU IIIA NR
EU IIIA NR C 129 173 2000-2500 EPA T3 NR, Turbocharged-Aftercooled
C 56-75 75-100 2200-2400 EPA T3 NR, Turbocharged EU IIIA NR
EU IIIA NR C 130 174 1800-2500 EPA T3 NR, Turbocharged-Aftercooled
C4.4 ACERT EU IIIA NR
C 62-75 83-99 2200 EPA T3 NR, Turbocharged C 136 182 2200 EPA T3 NR, Turbocharged-Aftercooled
EU IIIA NR EU IIIA NR
C 68-83 91-111 2200-2400 EPA T3 NR, Turbocharged- C 140 188 2200 EPA T3 NR, Turbocharged-Aftercooled
EU IIIA NR Aftercooled EU IIIA NR
C 75-106 100-142 2200 EPA T3 NR, Turbocharged- C 144 193 2200 EPA T3 NR, Turbocharged-Aftercooled
EU IIIA NR, Aftercooled EU IIIA NR
EPA T4f NRNG C 146 196 2200 EPA T3 NR, Turbocharged-Aftercooled
EU IIIA NR
C 151 203 1800-2200 EPA T3 NR, Turbocharged-Aftercooled
EU IIIA NR
Specifications C 159 213 2200 EPA T3 NR, Turbocharged-Aftercooled
L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in3) EU IIIA NR
C 168 225 2200 EPA T3 NR, Turbocharged-Aftercooled
C4.4 663 (26.1) 597 (23.5) 810 (32) 306 (675) 4.4 (269) EU IIIA NR
C4.4 ACERT 631 (24.8) 626 (24.7) 824 (32) 360 (794) 4.4 (269) C 176 236 2200 EPA T3 NR, Turbocharged-Aftercooled
Bore x Stroke – mm (in) 105 x 127 (4.1 x 5) EU IIIA NR
EU IIIA NR
EU IIIA NR

Specifications
C6.6 ACERT 929 (34) 668 (26.3) 797 (31.4) 506 (1116) 6.6 (403)
Bore x Stroke – mm (in) 105 x 127 (4.1 x 5)
Please see spec sheet for more information:
C4.4 ACERT.................... LEHH0551, LEHH0569
For diesel engine rating definitions please see page 10. For diesel engine rating definitions please see page 10.
C7 ACERT • C7.1 ACERT WELL
SERVICE C9 ACERT • C9.3 ACERT WELL
SERVICE

Rating Tier bkW bhp rpm Emissions Notes
C9 ACERT
C 242 325 2200 IMO II, Watercooled, SCAC,
EPA T3 NR, REMAC avail
EU IIIA NR
D 254 340 2200 IMO II, Watercooled, SCAC,
Well Service Ratings EPA T3 NR, REMAC avail
Rating Tier bkW bhp rpm Emissions Notes EU IIIA NR
C7 ACERT D 254 340 2200 IMO II, Haz Loc, SCAC
D 205 275 2200 IMO II, EPA T2 M, Watercooled, SCAC, EPA T3 NR, & REMAC avail,
EPA T3 NR, REMAC avail EU IIIA NR Derate option
EU IIIA NR A 205 275 2200 IMO II, EPA T3 NR, Dry Manifold
B 153 205 2200 IMO II, EPA T2 M, Haz Loc, SCAC only China NR III, EU IIIA NR
EPA T3 NR, B 224 300 2200 IMO II, EPA T3 NR, Dry Manifold
EU IIIA NR EU IIIA NR,
C 172 230 2200 IMO II, EPA T2 M, Haz Loc, SCAC only China NR III
EPA T3 NR, C 242 325 2200 IMO II, EPA T3 NR, Dry Manifold
EU IIIA NR EU IIIA NR,
B 168 225 2200 IMO II, EPA T3 NR, Dry Manifold, China NR III
EU IIIA NR ATAAC C 261 350 2200 IMO II, EPA T3 NR, Dry Manifold
China II NR EU IIIA NR,
C 186 250 2200 IMO II, EPA T3 NR, Dry Manifold, China NR III
EU IIIA NR ATAAC D 280 375 2200 IMO II, EPA T3 NR, Dry Manifold
China II NR EU IIIA NR
D 224 300 2200 IMO II, EPA T3 NR, Dry Manifold,
EU IIIA NR, ATAAC
China II NR
C7.1 ACERT
B 141 188 1800-2200 EPA T4i NRG, EU IIIB NR Dry Manifold
B 168 225 1800-2200 EPA T4f NRNG, EU IV NR Dry Manifold
C 168 250 1800-2200 EPA T4f NRNG, EU IV NR Dry Manifold
C 205 275 1800-2200 EPA T4f NRNG, EU IV NR Dry Manifold
Specifications Specifications
L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in3) L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in3)
C7 ACERT 1053 (41.5) 758 (29.8) 1032 (40.6) 629 (1386) 7.2 (439) C9 ACERT 1092 (43) 828 (32.6) 1024 (40.3) 716 (1578) 8.8 (537)
C7.1 ACERT 1065 (41.9) 820 (32.3) 907 (35.7) 715 (1576) 7.01 (427.7) C9.3 ACERT 1150 (45.3) 828 (32.6) 1123 (44.21) 885 (1950) 9.3 (567.5)
Bore x Stroke – mm (in) Bore x Stroke – mm (in)
C7 ACERT 110 x 127 (4.3 x 5) C9 ACERT 112 x 149 (4.4 x 5.8)
C7.1 ACERT 105 x 135 (4.1 x 5.3) C9.3 ACERT 115 x 149 (4.5 x 5.9)

Please see spec sheet for more information: C9 ACERT...................... LEHW0014, LEHW0046, LEHW0047
C7 ACERT...................... LEHW0043, LEHW0044, LEHW0045 C9.3 ACERT.................... LEHW0099
C11 ACERT W E L L SERVICE
C13 ACERT WELL SERVICE

A 242 325 2100 IMO II, EPA T3 NR, Dry Manifold A 287 385 1800-2100 IMO II, EPA T3 NR, Avail with Cat
EU IIIA NR, EU IIIA NR, Compression Brake,
China III NR China III NR Dry Manifold
B 261 350 2100 IMO II, EPA T3 NR, Dry Manifold B 309 415 1800-2100 IMO II, EPA T3 NR, Avail with Cat
C 287 385 2100 IMO II, EPA T3 NR, Dry Manifold C 328 440 1800-2100 IMO II, EPA T3 NR, Avail with Cat
D 313 420 2100 IMO II, EPA T3 NR, Dry Manifold D 354 475 1800-2100 IMO II, EPA T3 NR, Dry Manifold
EU IIIA NR, EU IIIA NR,
China III NR China III NR
E 336 450 2100 IMO II, EPA T3 NR, Dry Manifold E 388 520 1800-2100 IMO II, EPA T3 NR, Dry Manifold
China III NR China III NR
Specifications
C11 ACERT 1201 (47.3) 1057 (41.6) 1176 (46.3) 892 (1967) 11.15 (681)
Specifications
C13 ACERT 1201 (47.3) 1013 (39.9) 1186 (46.7) 896 (1976) 12.5 (763)
C13 ACERT T4 1203 (47.4) 933.14 (36.74) 1186 (46.7) 1350 (2976) 12.5 (763)
Please see spec sheet for more information: Please see spec sheet for more information:
C11 ACERT..................... LEHW0063 C13 ACERT..................... LEHW0062, LEHW0096

A 328 440 1800-2100 IMO II, EPA T3 NR, Avail with Cat A 429 575 2100 IMO II, EPA T3 NR, Avail with Cat
EU IIIA NR, Compression Brake, EU IIIA NR, Compression Brake,
China III NR Dry Manifold China III NR Dry Manifold
B 354 475 1800-2100 IMO II, EPA T3 NR, Avail with Cat B 447 600 2100 IMO II, EPA T3 NR, Avail with Cat
China II NR Dry Manifold China III NR Dry Manifold
C 403 540 1800-2100 IMO II, EPA T3 NR, Avail with Cat C 470 630 2100 IMO II, EPA T3 NR, Avail with Cat
China II NR Dry Manifold China III NR Dry Manifold
D 433 580 2100 IMO II, EPA T3 NR, Dry Manifold C 522 700 2100 IMO II, EPA T3 NR, Dry Manifold
China II NR China III NR
E 444 595 2100 IMO II, EPA T3 NR, Dry Manifold D 570 765 2100 IMO II, EPA T2 NR Dry Manifold
EU IIIA NR, E 597 800 2100 IMO II, EPA T2 NR Dry Manifold
China II NR A/B 447 600 1800-1900 EPA T4i NRG, EU IIIB NR Dry Manifold
D 400 536 1800-2000 EPA T2 M, IMO II, Haz Loc, SCAC, C 470 630 1800-1900 EPA T4i NRG, EU IIIB NR, Dry Manifold
EPA T3 M Watercooled China Phase IV
D 403 540 1800-2000 EPA T2 M, IMO II, Haz Loc, SCAC C 522 700 1800-1900 EPA T4i NRG, EU IIIB NR Dry Manifold
EPA T3 M & REMAC, C 563 755 1800 EPA T4f NRNG Dry Manifold
Watercooled D 597 800 1800 EPA T4f NRNG Dry Manifold
A/B 354 475 1800-2100 EPA T4i NRG, EU IIIB NR Dry Manifold A 429 575 2000 EPA T4f NRNG, EU IV NR Dry Manifold
C 403 540 1800-2100 EPA T4i NRG, EU IIIB NR, Dry Manifold B 447 600 2000 EPA T4f NRNG, EU IV NR Dry Manifold
China Phase IV C 470 630 2000 EPA T4f NRNG, EU IV NR Dry Manifold
D 433 580 1800-2100 EPA T4i NRG, EU IIIB NR Dry Manifold
A/B 354 475 1800-2100 EPA T4f NRNG, EU IV NR Dry Manifold
C 403 540 1800-2100 EPA T4f NRNG, EU IV NR, Dry Manifold Specifications
D 433 580 1800-2100 EPA T4f NRNG, EU IV NR Dry Manifold
Specifications C18 ACERT 1389 (54.7) 919 (36.2) 1227 (49.5) 1273 (2807) 18.1 (1105)
L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in3) C18 ACERT T4 1530 (60.2) 961 (37.8) 1282 (51) 1580 (3482) 18.1 (1105)
C15 ACERT 1377 (54) 927 (37) 1227 (48) 1245 (2743) 15.2 (927.6) Bore x Stroke – mm (in) 145 x 183 (5.7 x 7.2)
C15 ACERT T4 1530 (60.2) 961 (37.8) 1282 (51) 1666 (3673) 15.2 (927.6)
Bore x Stroke – mm (in) 137.2 x 171.5 (5.4 x 6.75)
C15 ACERT..................... LEHW0097, LEHW0061 C18 ACERT..................... LEHW0098, LEHW0053, LEHW0109

Well Service Ratings A 597 800 2100 EPA T2 NR, Watercooled, SCAC,
Rating Tier bkW bhp rpm Emissions Notes EPA T2 M, IMO II SCAC+ HEX, & REMAC
A 642 860 2100 EPA T2 NR, Watercooled, SCAC,
A 597 800 1800-2100 EPA T2 NR, China III NR Dry Manifold EPA T2 M, IMO II SCAC+ HEX, & REMAC
B 652 875 1800-2100 EPA T2 NR, China III NR Dry Manifold B 686 920 2100 EPA T2 NR, Watercooled, SCAC,
C 708 950 1800-2100 EPA T2 NR, China III NR Dry Manifold EPA T2 M, IMO II SCAC+ HEX, & REMAC
D 783 1050 1800-2100 EPA T2 NR, China III NR Dry Manifold C 746 1000 2100 EPA T2 NR, Watercooled, SCAC,
E 858 1150 1800-2100 China III NR Dry Manifold EPA T2 M, IMO II SCAC+ HEX, & REMAC
A 597 800 1800 EPA T4f NRNG Narrow Config, D 828 1110 2100 EPA T2 NR, Watercooled, SCAC,
Dry Manifold EPA T2 M, IMO II SCAC+ HEX, & REMAC
B 652 875 1800 EPA T4f NRNG Narrow Config, E 914 1225 2100 EPA T2 NR, Watercooled, SCAC,
Dry Manifold EPA T2 M, IMO II SCAC+ HEX, & REMAC
C 708 950 1800 EPA T4f NRNG Narrow Config, A 597 800 2100 EPA T2 NR, Haz Loc, SCAC only,
Dry Manifold EPA T2 M, IMO II Watercooled
A 642 860 2100 EPA T2 NR, Haz Loc, SCAC only,
EPA T2 M, IMO II Watercooled
Specifications B 686 920 2100 EPA T2 NR, Haz Loc, SCAC only,
L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in3) EPA T2 M, IMO II Watercooled
D 828 1110 2100 EPA T2 NR, Haz Loc, SCAC only,
C27 ACERT 1918 (75.5) 1463 (57.6) 1321 (52) 2895 (6382) 27 (1648) EPA T2 M, IMO II Watercooled
C27 ACERT T4 2160 (85) 1270 (50) 1650 (65) 2956 (6516) 27 (1648) A 597 800 2100 EPA T2 NR, IMO II Dry Manifold
Bore x Stroke – mm (in) 137.7 x 152.4 (5.42 x 6) B 708 950 1800-2100 China III NR, Dry Manifold
EPA T2 NR, IMO II
C 839 1125 1800-2100 China III NR, Dry Manifold
EPA T2 NR, IMO II
D 895 1200 1800-2100 China III NR, Dry Manifold
EPA T2 NR, IMO II
E 1007 1350 1800-2100 China III NR, Dry Manifold
EPA T2 NR, IMO II
C 839 1125 1800 EPA T4f NRNG Dry Manifold
Specifications
C32 ACERT 1934.9 (76.18) 1431 (56.34) 1388.3 (54.66) 2286 (5040) 32 (1953)
C32 ACERT T4 1905 (75) 1600 (63) 1549 (61) 3107 (6850) 32 (1953)
C27 ACERT..................... LEHW0052, LEHW0101 C32 ACERT..................... LEHW0049, LEHW0050, LEHW0051, LEHW0100
3512B W E L L SERVICE
3512C HD W E L L SERVICE

Rating Tier bkW bhp rpm Emissions Rating Tier bkW bhp rpm Emissions Notes
E 1491 2000 1900 EPA T1 NR, EPA T1 M E 1603 2150 1900 EPA T2 NR, ATAAC, 1.6% or 7%
E 1603 2150 1900 EPA T1 NR, EPA T1 M IMO II, China III NR Torque Rise
E 1678 2250 1900 EPA T1 NR, EPA T1 M E 1678 2250 1900 EEPA T2 NR, ATAAC, 1.6% or 7%
IMO II, China III NR Torque Rise
E 1752 2350 1900 EPA T2 NR, ATAAC,
IMO II, China III NR 7% Torque Rise
E 1864 2500 1900 EPA T2 NR, ATAAC, 7%
Specifications IMO II, China III NR Torque Rise
L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in3) E 1678 2250 1900 EPA T2 NR, SCAC, 1.6% or 7%
IMO II, China III NR Torque Rise
3512B 2827 (111.3) 1793 (70.6) 1862 (73.3) 4803.6 (10,590) 52 (3173) E 1864 2500 1900 EPA T2 NR, SCAC, 7%
Bore x Stroke – mm (in) 170 x 190 (6.7 x 7.5) IMO II, China III NR Torque Rise
Dynamic Gas Blending – Well Service Ratings

E 1678 2250 1900 EPA T2 NR Retrofit Kit Only
E 1864 2500 1900 EPA T2 NR Retrofit Kit Only
Specifications
3512C HD ATAAC 2804 (110.4) 1504 (59.2) 2192 (86.3) 6200 (13,669) 5 8.9 (3596)
3512C HD SCAC 2880 (113.8) 1630 (64.2) 2185 (86.1) 6402 (14,115) 5 8.9 (3596)
3512B........................... LEHW0055 3512C HD....................... LEHW0056, LEHW0090
3512E • 3512E DGBT M WELL SERVICE
3516C HD W E L L SERVICE
Diesel Only - Well Service Ratings Well Service Ratings

E 1678 2250 1800 EPA T4F NR ATAAC , SCAC E 2237 3000 1900 EPA T2 NR, China III NR SCAC
E 1865 2500 1800 EPA T4F NR ATAAC , SCAC E 2349 3150 1900 EPA T2 NR, China III NR SCAC
E 2461 3300 1900 EPA T2 NR, China III NR SCAC
*Dynamic Gas Blending – Well Service Ratings E 2237 3000 1900 EPA T1 NR SCAC
E 2349 3150 1900 EPA T1 NR SCAC
Rating Tier bkW bhp rpm Emissions Notes E 2461 3300 1900 EPA T1 NR SCAC
E 1678 2250 1800 EPA T4F ATAAC , SCAC
E 1865 2500 1800 EPA T4F ATAAC , SCAC
China Stage III – Well Service Ratings

E 2237 3000 1900 China Stage III, NR ATAAC 7% Torque Rise
Specifications
EPA T4F Diesel
3512E ATAAC 3099 (122) 2235 (88) 2718 (107) 9646 (21,266) 5 8.9 (3596)
3512E SCAC 3490 (137.4) 2235 (88) 2718 (107) 10277 (22,657) 5 8.9 (3596)
DGB Specifications
3512E ATAAC 3099 (122) 2235 (88) 2718 (107) 9778 (21,486) 5 8.9 (3596)
3512E SCAC 3490 (137.4) 2235 (88) 2718 (107) 10414 (22,959) 5 8.9 (3596
China Stage III 3516C HD SCAC 3450 (135.83) 1688 (66.5) 2040 (80.3) 8516 (18,775) 78 (4765)
3512E ATAAC 2242 (88.3) 1982 (78) 2208 (86.9) 6270 (13,823) 58.9 (3596)
* The 3512E DGB Tier 4 Final engine is certified in only 49 states, not including California.
This engine does not contain a CARB certification and is not for use in California
Please see spec sheet for more information: 3516C HD....................... LEHW0159, LEHW0160
3512E ........................... LEHW0239, LEHW0240, LEHW0345
For diesel engine rating definitions please see page 10. For diesel engine rating definitions
For diesel engine rating definitions please see page 10. please see page 10.
Hazardous Location W E L L SERVICE
Watercooled Manifold WELL
SERVICE

C7 ACERT Well Service Ratings
B 153 205 2200 IMO II, EPA T2 M, Haz Loc, Rating Tier bkW bhp rpm Emissions Notes
EPA T3 NR, SCAC only, C7 ACERT
EU IIIA NR Watercooled B 153 205 2200 IMO II, EPA T2 M, Watercooled,
C 172 230 2200 IMO II, EPA T2 M, Haz Loc, EPA T3 NR, SCAC & REMAC avail
EPA T3 NR, SCAC only EU IIIA NR
EU IIIA NR Watercooled C 172 230 2200 IMO II, EPA T2 M, Watercooled,
C9 ACERT EPA T3 NR, SCAC & REMAC avail
D 254 340 2200 IMO II, Haz Loc, SCAC & REMAC EU IIIA NR
D 205 275 2200 IMO II, EPA T2 M, Watercooled,
EPA T3 NR , avail, Derate Option, EPA T3 NR, SCAC & REMAC avail
EU IIIA NR Watercooled EU IIIA NR
C15 ACERT C9 ACERT
D 400 536 1800-2000 EPA T2 M, IMO II, Haz Loc, SCAC, C 242 325 2200 IMO II, Watercooled,
EPA T3 M Watercooled EPA T3 NR, SCAC & REMAC avail
D 400 536 1800-2100 EU IIIA NR Constant Haz Loc, SCAC, EU IIIA NR
D 254 340 2200 IMO II, Watercooled,
Speed, IMO II Watercooled EPA T3 NR, SCAC & REMAC avail
D 403 540 1800-2000 EPA T2 M, IMO II, Haz Loc, SCAC & EU IIIA NR
EPA T3 M REMAC, Watercooled C15 ACERT
C32 ACERT D 400 536 1800-2000 EPA T2 M, IMO II, Haz Loc, SCAC,
A 597 800 2100 EPA T2 NR, Haz Loc, SCAC only, EPA T3 M Watercooled
EPA T2 M, IMO II Watercooled D 403 540 1800-2000 EPA T2 M, IMO II, Haz Loc, SCAC & REMAC,
A 641 860 2100 EPA T2 NR, Haz Loc, SCAC only, EPA T3 M Watercooled
C32 ACERT
EPA T2 M, IMO II Watercooled A 597 800 2100 EPA T2 NR, Watercooled, SCAC,
B 686 920 2100 EPA T2 NR, Haz Loc, SCAC only, EPA T2 M, IMO II SCAC + HEX & REMAC avail
EPA T2 M, IMO II Watercooled A 641 860 2100 EPA T2 NR, Watercooled, SCAC,
D 826 1110 2100 EPA T2 NR, Haz Loc, SCAC only, EPA T2 M, IMO II SCAC + HEX & REMAC avail
EPA T2 M, IMO II Watercooled B 686 920 2100 EPA T2 NR, Watercooled, SCAC,
EPA T2 M, IMO II SCAC + HEX & REMAC avail
C 746 1000 2100 EPA T2 NR, Watercooled, SCAC,
D 828 1110 2100 EPA T2 NR, Watercooled, SCAC,
E 913 1225 2100 EPA T2 NR, Watercooled, SCAC,
Specifications EPA T2 M, IMO II SCAC + HEX & REMAC avail
L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in3) Specifications

C7 ACERT 1053 (41.5) 758 (29.8) 1032 (40.6) 629 (1386) 7.2 (439) L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in3)
C9 ACERT 1092 (43) 828 (32.6) 1024 (40.3) 716 (1578) 8.8 (537) C7 ACERT 1053 (41.5) 758 (29.8) 1032 (40.6) 629 (1386) 7.2 (439)
C15 ACERT 1377 (54) 927 (37) 1227 (48) 1245 (12,743) 15.2 (927.6)
C32 ACERT 1918 (75.5) 1473 (58) 1321 (52) 2286 (5040) 32 (1953)
C9 ACERT 1092 (43) 828 (32.6) 1024 (40.3) 716 (1578) 8.8 (537)
C32 ACERT 1918 (75.5) 1473 (58) 1321 (52) 2286 (5040) 32 (1953)
Bore x Stroke – mm (in)
C7 ACERT 110 x 127 (4.3 x 5) C18 ACERT 145 x 183 (5.7 x 7.2) Bore x Stroke – mm (in)
C9 ACERT 112 x 149 (4.4 x 5.8) C32 ACERT 145 x 162 (5.7 x 6.4) C7 ACERT 110 x 127 (4.3 x 5)
C15 ACERT 137.2 x 171.5 (5.4 x 6.75) C9 ACERT 112 x 149 (4.4 x 5.8)
C32 ACERT 145 x 162 (5.7 x 6.4)
C7 ACERT... LEHW0044 C9 ACERT... LEHW0014 C15 ACERT... LEHW0113 C32 ACERT... LEHW0051 C7 ACERT........ LEHW0045 C9 ACERT......... LEHW0046 C32 ACERT....... LEHW0050
Watercooled Manifold WELL
SERVICE Transmission Application Chart
Engine Transmission Max hp Page Number
C9
CX31-P600 600 32
ACERT
C11
CX31-P600 600 32
ACERT
C13
CX31-P600 600 32
ACERT
C15 CX31-P600 600 32
Well Service Ratings ACERT CX38-P892 800 33-34
Rating Tier bkW bhp rpm Emissions Notes C18
CX38-P892 800 33-34
3508 ACERT
A 507 680 1200 NC Watercooled C27
TH48-E70 1200 38
C 611 820 1300 NC Watercooled ACERT
A 638 855 1800 NC Watercooled
C32 38
C 746 1000 1800 NC Watercooled TH48-E70 1500
C 846 1135 1900 NC Watercooled ACERT
3512 3512B CX48-P2300 2300 35
C 858 1150 1300 NC Watercooled CX48-P2300 2300 35
C 1119 1500 1800 NC Watercooled TH53-E60 2500 36
C 1342 1800 1900 NC Watercooled 3512C
TH55-E70 3300 39
3516
A 1010 1355 1200 NC Watercooled TH55-E90 3300 40
C 1242 1665 1300 NC Watercooled
CX48-P2300 2300 35
TH53-E60 2500 36
Specifications
3512E CX48-P3060 3000 37
TH55-E70 3300 39
3508 2136.14 (84.1) 1701.8 (67) 1719.58 (67.7) 4309 (9500) 34.5 (2105)
3512 2674.62 (105.3) 1701.8 (67) 1719.58 (67.7) 5203.75 (11,462) 51.8 (3158) TH55-E90 3300 40
3516 3251 (128) 1701 (66.9) 2004 (78.9) 8660 (19,090) 69 (4210)
TH55-E70 3300 39
Bore x Stroke – mm (in) 170 x 190 (6.7 x 7.5) 3516C
TH55-E90 3300 40

3512............................. LEHW0055
3516............................. LEHW0160
CX31-P600 W E L L SERVICE TRANSMISSION
CX38-P892 IPD Version CX38-P892 Standard Version
Ratings Transmission Speed Ratios

Gross Input Power 447 kW (600 hp) Gear Ratio Ratings Transmission Speed Ratios
Gross Input Torque 2746 N•m 1F 4.40 Gross Input Gear Ratio
(2025 lb-ft) 2F 2.33 Power* 457-652 KW (600-875 hp) 1F 6.21
Rated Input Speed 2100 rpm 3F 1.53 Gross Input 2F 4.69
Maximum Input Speed 2500 rpm 4F 1.00 Torque 3966 N•m (2925 lb-ft) 3F 3.38
5F 0.72 Rated Input Speed 2100 rpm 4F 2.68
Output Connection Options 5F 2.03
6F 0.61 * ASC approval on ratings over 800 hp
1710 output yoke, 1810 yoke, 1810 6F 1.66
companion flange, ISO-8667 flange 1R 3.97
7F 1.20
Stall Torque Ratio @ Rated Speed Output Connection Options
Power Take Off 8F 1.00
< 400 hp engine 2.669 1810 companion flange,
(Pump Auxiliary Drive) ISO7646 255 flange 9F 0.69
> 400 hp engine 2.324
PTO Mountings and Locations* Power Take Off 1R -5.91
Standard Configuration: Dimensions
Height: 719 mm (28.3 in) (Pump Auxiliary Drive) 2R -2.56
10-bolt, 199 kW/267 hp at 8 o’clock and
1 o’clock** Width: 613 mm (24.1 in) PTO Mountings and Locations* Dimensions
Length: 1098 mm (43.2 in) Integral Pump Drive Configuration:
Height: 853.9 (33.6”) STD 1003.1
Optional Integral Pump Drive Weight 10-bolt PTO at at 11 o’clock and 1
(39.5”) IPD
Configuration: Approximate Dry Weight o’clock
Width: 709.8 mm (27.9”) STD 751.9
SAE J744 B-size (2- and 4-bolt) 149 kW/ STD Configuration 456 kg (1006 lbs) Rear facing PTO’s: PTO’s SAE “C” J744 (29.6”) IPD
200 hp at 1 o’clock and 11 o’clock Integral Pump 14 teeth splines (CCW rotation, two and Length: (drivetrain) 1184.9 (46.6”) STD
facing input** Drive 496 kg (1094 lbs) four bolt pump mounts), 1.2 x engine 1288.6 (50.7”)IPD
speed
SAE J744 C-size (2- and 4-bolt) 149 kW/ Spec Sheet Weight
200 hp at 1 o’clock and 11 o’clock LEHW0008 Front facing PTO’s: PTO’s SAE “B” J744
facing output** 13 teeth splines (CW rotation, two and Approximate Dry Weight
four bolt pump mounts), 1.2 x engine STD Configuration 748 kg (1650 lbs)
Cat 10-bolt 355 kW/476 hp at 5 o’clock Integral Pump
speed
rear Drive 896 kg (1975 lbs)
**Viewed from rear

**Please see Application and Installation Guide (REHS3513) for details on Ratings continued on page 34
combined PTO power rating
32 O I L & G A S 33 O I L & G A S
Ratings continued from page 33
CX38-P892 PTO's Maximum Rated Torque Maximum Rated Power

Single Side PTO 174 N•m (128 lb-ft) 56 kW (75 hp)(1)
Single Integral Drive PTO 658 N•m (485 lb-ft) 149 kW (200 hp)(2)
Total Combined Side and
Varies 261 kW (350 hp)(3)
Integral Drive PTO's
(1)
Maximum rated power taken at 1800 rpm engine speed
(2)
Maximum rated power taken at 1800 rpm engine speed x 1.2 PTO speed up
(3)
Total combined side and integral drive PTOs include all 10-bolt, SAE B and SAEC
locations on the transmission
Ratings Transmission Speed Ratios
Gross Input Power 1715 kW (2300 hp) Gear Ratio
Gross Input 1F 3.34
Torque 9024 N•m (6656 lb-ft) 2F 2.45
Rated Input Speed 1900 rpm 3F 2.20
Maximum Input Speed 2150 rpm 4F 1.81
5F 1.62
Output Connection (Yoke)
6F 1.36
GWB 390.60/GWB 390.65
7F 1.19
(Pump Auxiliary Drive) Stall Torque 2.20
PTO Mountings and Locations* Dimensions
SAE J704 (8-bolt) 14.9 kW/20 hp at Height: 1049 mm (41.3 in)
12 o’clock Width: 1128 mm (44.4 in)
SAE J744 C-size (2- and 4-bolt) 112 kW/ Length: 1893.2 mm (74.5 in)
150 hp at 5 o’clock
Weight
Optional Cat bolt-on PTO at 12 o’clock Approximate Dry Weight
112 kW / 150 hp capable, SAE J744 Transmission 1601 kg (3530 lbs)
C-size (2 & 4 bolt), front or rear drive Engine/Transmission
Coupling 156 kg (343 lbs)
Spec Sheet
LEHW0148
Please see spec sheet for more information: LEHW20261 - Cat PTO
CX38-P892...................... LEHW0357
**Viewed from rear

***Please see Application and Installation Guide (M0078890) for details on
combined PTO power rating *Viewed from rear
R A T I N G S G U I D E 34 35 O I L & G A S
TH53-E-60 W E L L SERVICE TRANSMISSION
Ratings Transmission Speed Ratios Ratings Transmission Speed Ratios

Gross Input Power* 1864 KW (2500 hp) Gear Ratio Gross Input Power* 2235KW (3000 hp) Gear Ratio
Gross Input 1F 4.54 Gross Input 1F 4.54
Torque 12086 N•m (8914 lb-ft) 2F 3.33 Torque 12040 N•m (8880 lb-ft) 2F 3.33
Rated Input Speed 1900 rpm 3F 2.99 Rated Input Speed 1900 rpm 3F 2.99
4F 2.46 Maximum Input Speed 2025 rpm 4F 2.46
Output Connection Options
5F 2.20 5F 2.20
GWB 390.70, GWB 390.65 Output Connection Options
6F 1.62 6F 1.62
GWB 390.70
Power Take Off
Dimensions Dimensions
(Pump Auxiliary Drive) Power Take Off
Height: 1122 mm (44.2 in) Height: 1122 mm (44.2 in)
(Pump Auxiliary Drive)
PTO Mountings and Locations* Width: 1215 mm (48.0 in) Width: 1269 mm (50.0 in)
Drive: Engine-driven PTO Length: 1793 mm (70.6 in) PTO Mountings and Locations* Length: 1793 mm (70.6 in)
Location: 12 o’clock, 10 o’clock Drive: Engine-driven PTO
Weight Weight
Mountings: SAE J704 8 bolt Location: 12 o’clock, 10 o’clock
Approximate Weight Approximate Weight
SAE J744 C-Size (Optional Cat bolt-on Mountings: SAE J704 8 bolt
With Coupling 2005 kg (4420 lbs) With Coupling 2050 kg (4520 lbs)
PTO) SAE J744 C-Size (Optional Cat bolt-on
Spec Sheet PTO) Spec Sheet
Maximum PTO Power:
LEHW0374 LEHW0344
150 hp @1900 rpm (Cat PTO) Maximum PTO Power:
LEHW20261 - Cat PTO LEHW20261 - Cat PTO
20 hp @1900 rpm (Non-Cat PTOs) 150 hp @1900 rpm (Cat PTO)
20 hp @1900 rpm (Non-Cat PTOs)
**Viewed from rear **Viewed from rear

***Please see Application and Installation Guide (M0090883) for details on ***Please see Application and Installation Guide (M0090883) for details on
combined PTO power rating combined PTO power rating
TH48-E70 W E L L SERVICE TRANSMISSION
TH55-E70 WELL SERVICE TRANSMISSION
Ratings Transmission Speed Ratios Ratings Transmission Speed Ratios

Gross Input Power 895 kW (1200 hp) Gear Ratio Gross Input Power 2461 kW (3300 hp) Gear Ratio
1118 kW (1500 hp) 1F 6.16 Gross Input 1F 6.25
Gross Input 2F 4.52 Torque 12 667 N•m (9350 lb-ft) 2F 4.59
Torque 5995 N•m (4422 lb-ft) 3F 3.33 Rated Input Speed 1900 rpm 3F 3.38
Rated Input Speed 2100 rpm 4F 2.47 Maximum Input Speed 1970 rpm 4F 2.48
Maximum Input Speed 2200 rpm 5F 1.82 5F 1.83
Output Connection (Yoke)
6F 1.36 6F 1.36
Output Connection (Yoke) GWB 390.65 – 2500 hp
7F 1.00 7F 1.00
GWB 390.60/GWB 390.65 GWB 390.70 – 3000+ hp
Stall Torque Ratio 2.20 Stall Torque Ratio 2.23
Power Take Off Power Take Off
(Pump Auxiliary Drive) Dimensions (Pump Auxiliary Drive) Dimensions
Height: 1092 mm (43 in) Height: 1288 mm (51 in)
PTO Mountings and Locations* PTO Mountings and Locations* Width: 1246 mm (49 in)
Width: 866 mm (34 in) SAE J704 (8-bolt) 14.9 kW/20 hp at
SAE J704 (8-bolt) 14.9 kW/20 hp at Length: 1681 mm (66 in) Length: 2132 mm (84 in)
3 o’clock, 5 o’clock, and 9 o’clock (Non- 3 o’clock (Non-Cat PTOs)
Cat PTOs) Weight Weight
SAE J744 C-size (2- and 4-bolt) 112 kW/
Approximate Dry Weight Approximate Dry Weight
Optional Cat bolt-on PTO 112 kW / 150 150 hp at 11 o’clock
Transmission 1694 kg (3735 lbs) Transmission 2871 kg (6330 lbs)
hp capable (3 o’clock and 9 o’clock Optional Cat bolt-on PTO at 3 o’clock Engine/Transmission Coupling
Engine/Transmission Coupling
positions), 67 kW / 90 hp capable (5 112 kW / 150 hp capable, SAE J744 2500 hp 136 kg (300 lbs)
108 kg (238 lbs)
o’clock position), SAE J744 C-size (2 & 4 C-size (2 & 4 bolt), front or rear drive 3000+ hp 181 kg (400 lbs)
bolt), front or rear drive Spec Sheet
LEHW1002 Spec Sheet
LEHW20261 - Cat PTO LEHW1006
** Transmission provided with SAE LEHW20261 - Cat PTO
J704 8-bolt interface at 3 o’clock and
5 o’clock PTO locations. Optional
SAE J704 8-bolt interface at 9 o’clock
location.
*Viewed from rear *Viewed from rear
TH55-E90 W E L L SERVICE TRANSMISSION
WS255 QUINTUPLEX PUMP
Specifications
Max. Input 2500 bhp (1864 bkW)
Max. rpm 330
Number of Plungers 5
Stroke Length 8 in (203.2 mm)
Ratings Transmission Speed Ratios Plunger Load 238,000 lb (107,960 kg)
Gross Input Power 2461 kW (3300 hp) Gear Ratio Gear Ratio 6.353:1
Gross Input 1F 4.67
Torque 12 677 N•m (9350 lb-ft) 2F 3.43 Dimensions and Weight
Rated Input Speed 1900 rpm 3F 3.03 Height: 50.87 in (1292.1 mm)
Maximum Input Speed 1970 rpm 4F 2.53 Width: 86.23 in (2190.2 mm)
5F 2.22 Length: 80.12 in (2035 mm)
Output Connection (Yoke) Weight: 16,600 lb (7530 kg)
6F 1.85
GWB 390.65 – 2500 hp
7F 1.64
GWB 390.70 – 3000+ hp
8F 1.36
(Pump Auxiliary Drive) Stall Torque Ratio 2.23
PTO Mountings and Locations* Dimensions Extreme Duty and Stainless Steel fluid ends available
SAE J704 (8-bolt) 14.9 kW/20 hp at Height: 1288 mm (51 in) Power End Lube Oil Filtration System is standard feature
3 o’clock (Non-Cat PTOs) Width: 1246 mm (49 in) Optional factory installed PEMS® Pump Electronic Monitoring System
SAE J744 C-size (2- and 4-bolt) 112 kW/ Length: 2137 mm (84 in)
150 hp at 11 o’clock
Weight Displacement Displacement at Pump rpm
Optional Cat bolt-on PTO at 3 o’clock Approximate Dry Weight Plunger
per Well Stimulation and Intermittent Application
112 kW / 150 hp capable, SAE J744 Diameter
Transmission 2755 kg (6075 lbs) Revolution 87 118 150 200 250 330
C-size (2 & 4 bolt), front or rear drive Engine/Transmission Coupling Gal/
in mm L/Rev. bpm psi bpm psi bpm psi bpm psi bpm psi bpm psi
2500 hp 136 kg (300 lbs) Rev.
3000+ hp 181 kg (400 lbs) 4 101.6 2.17 8.21 4.52 18 984 6.12 14996 7.76 11 830 10.33 8886 12.93 7102 17.05 5386
4.5 114.3 2.75 10.40 5.69 15 000 7.74 11849 9.83 9338 13.10 7012 16.38 5605 21.62 4247
Spec Sheet 5 127.0 3.40 12.87 7.05 12 150 9.55 9597 12.14 7562 16.19 5671 20.24 4537 26.71 3437
LEHW1006 Input Power (bhp) 2400 2400 2500 2500 2500 2500
LEHW20261 - Cat PTO Based on 90% ME and 100% VE – Intermittent Service Only
Pumps with pressures in excess of 15 000 psi require special gauge and discharge flanges

WS255.......................... LEPW0060
*Viewed from rear
WS305 QUINTUPLEX PUMP
Land Drilling Ratings
Specifications
Max. Input 3000 bhp (2237 bkW)
Max. rpm 275
Number of Plungers 5
Stroke Length 10 in (254 mm)
Plunger Load 250,000 lb (113 398 kg)
Gear Ratio 5.55:1
Dimensions and Weight
Height: 52.8 in (1341.1 mm)
Width: 95.6 in (2428.2 mm)
Length: 97.1 in (2466.3 mm)
Weight: 24,736 lb (11,221 kg)
Extreme Duty and Stainless Steel fluid ends available

Power End Lube Oil Filtration System is standard feature
Optional factory installed PEMS Pump Electronic Monitoring System
Displacement Displacement at Pump rpm

Plunger Well Stimulation and Intermittent Application
per
Diameter
Revolution 75 115 150 200 275
Gal/
in mm L/Rev. bpm psi bpm psi bpm psi bpm psi bpm psi
Rev.
4.0 101.6 2.72 10.3 4.86 19 900 7.43 16 450 9.71 12 615 12.93 9460 17.79 6875
Cat engines have been the driving force behind the majority of the
4.5 114.3 3.44 13.0 6.14 15 725 9.43 12 985 12.29 9960 16.38 7450 22.52 5425 world’s drilling wells for years. Cat engines and modules feature
5.0 127.0 4.25 16.1 7.60 12 730 11.64 10 520 15.17 8065 20.24 6050 27.81 4400
Input Power (bhp) 2368 3000 3000 3000 3000
proven reliability and durability, the right power for each application,
Based on 90% ME and 100% VE – Intermittent Service Only easy servicing, fuel consumption optimized for drilling, ease of
Pumps with pressures in excess of 15 000 psi require special gauge and discharge flanges installation, and low owning and operating costs.

WS305.......................... LEPW0085
C15 ACERT LAND DRILLING
Land Mechanical Drilling Engine Ratings

Rating Tier bkW bhp rpm Emissions
A/B 354 475 1800-2100 EPA T4 NRNG, EU V NR COMPLIANT
C 403 540 1800-2100 EPA T4 NRNG, EU V NR COMPLIANT
D 433 580 1800-2100 EPA T4 NRNG, EU V NR COMPLIANT
A* 328 440 1800-2100 EPA T3 NR, EPA ESE, UN R96 IIIA, China III NR, IMO II Land Mechanical Drilling Engine Ratings
B* 354 475 1800-2100 EPA T3 NR, EPA ESE, UN R96 IIIA, China III NR, IMO II
Rating Tier bkW bhp rpm Emissions
C* 403 540 1800-2100 EPA T3 NR, EU IIIA NR, UN R96 IIIA, China III NR, IMO II EPA T3 NR, EPA ESE, EU Stage IIIA,
A/B 354 475 1800-2100 EPA T4i NRNG, EU IIIB NR, IMO III A* 429 575 1800- 2100
China III NR, IMO II, NC
C 403 540 1800-2100 EPA T4i NRNG, EU IIIB NR, IMO III , China Phase IV EPA T3 NR, EPA ESE, EU Stage IIIA,
B* 447 600 1800- 2100
D 433 580 1800-2100 EPA T4i NRNG, EU IIIB NR, IMO III China III NR, IMO II, NC
EPA T3 NR, EPA ESE, EU Stage IIIA,
D 400 536 1800-2000 IMO II, EPA T3M, Haz Loc C* 470 630 1800- 2100
D 403 540 1800-2000 IMO II, EPA T3M, Haz Loc EPA T3 NR, EPA ESE, EU Stage IIIA,
C 522 700 1800- 2100
D 570 765 1800- 2100 EPA T2 NR, China III NR, IMO II
*Available with Cat compression brake E 597 800 1800- 2100 EPA T2 NR, China III NR, IMO II
A/B 447 600 1800- 1900 EPA T4i NR, EU IIIB
A 429 575 1800 -2000 EPA T4F NRNG, EU V NR
Land Drilling Module Ratings
B 447 600 1800 -2000 EPA T4F NRNG, EU V NR
Duty bkW ekW kVA bhp Emissions C 470 630 1800 -1900 EPA T4i NR, EU IIIB
50 Hz/1500 rpm C 522 700 1800 -1900 EPA T4i NR, EU IIIB
Prime 331 292 365 444 China II NRNC, EU II NRNC C 563 755 1800 -1900 EPA T4i NR
Prime 410 365 456 550 China II NRNC, EU II NRNC C 470 630 1800 -2000 EPA T4F NRNG, EU V NR
60 Hz/1800 rpm C 563 755 1800 EPA T4F NRNG, EU V NR
Prime 366 320 400 491 EPA ESE D 597 800 1800 EPA T4F NRNG, EU V NR
Prime 409 365 456 549 EPA ESE
Prime 530 455 569 711 EPA ESE *Available with Cat compression brake
Land Drilling Module Ratings

Duty bkW ekW kVA bhp Emissions
Specifications
50 Hz/1500 rpm
Prime 490 436 545 657 China II NRNC, EU II NRNC
C15 ACERT 1377 (54) 927 (37) 1227 (48) 1245 (2743) 15 (928)
60 Hz/1800 rpm
C15 ACERT T4 1530 (60.2) 961 (37.8) 1282 (51) 1580 (3482) 15 (928)
C15 ACERT Prime 576 500 625 772 EPA ESE
Module 3518 (138.5) 1524 (60) 2110 (83.1) 4760 (10,500) 15 (928) Prime 624 545 681 837 EPA ESE
Bore x Stroke – mm (in) 137 x 171 (5.4 x 6.75) Prime 528 455 569 708 EPA T4F NRNG

C15 ACERT (T3)..................... LEHW0061 C15 ACERT (T4)............. LEHW0097
C15 ACERT Module................ LEHW0010
Ratings continued on page 46
Specifications
C18 ACERT 1389 (54.7) 919 (36.2) 1227 (49.5) 1273 (2807) 18 (1105)
C18 ACERT T4 1530 (60.2) 961 (37.8) 1282 (51) 1580 (3482) 18 (1105) Land Mechanical Drilling Engine Ratings
C18 ACERT
Module 3632 (143) 1524 (60) 2115 (83.3) 5033 (11,095) 18 (1105) Rating Tier bkW bhp rpm Emissions
Bore x Stroke – mm (in) 145 x 183 (5.7 x 7.2) A 597 800 1800-2100 IMO II
B 653 875 1800-2100 IMO II
C 708 950 1800-2100 IMO II
D 783 1050 1800-2100 IMO II
E 858 1150 1800-2100 IMO II
A 597 800 1800-2100 EPA T4i NRNG
B 653 875 1800-2100 EPA T4i NRNG
C 708 950 1800-2100 EPA T4i NRNG
D 783 1050 1800-2100 EPA T4i NRNG
A 597 800 1800 EPA T4F NRNG, EU V
B 652 875 1800 EPA T4F NRNG, EU V
C 708 950 1800 EPA T4F NRNG, EU V
D 783 1050 1800 EPA T4F NRNG, EU V
Land Electric Drilling Module Ratings

60 Hz/1800 rpm
Prime 824 725 1035 1105 NC
Prime 824 725 907 1105 NC
Specifications
C27 ACERT 1918 (75.5) 1463 (57.6) 1321 (52) 2895 (6382) 27 (1648)
C27 ACERT T4 2160 (85) 1270 (50) 1650 (65) 2956 (6516) 27 (1648)
C27 ACERT
Module 5228 (205.8) 1950 (76.8) 2180 (85.8) 9072 (20,000) 27 (1648)
Bore x Stroke – mm (in) 137.7 x 152.4 (5.42 x 6)

C18 ACERT (T3)................ LEHW0053 C18 ACERT Module (T4F)..... LEHW0333 Please see spec sheet for more information:
C18 ACERT (T4i)............... LEHW0098 C18 ACERT Module............ LEHW7450 C27 ACERT (T2)................ LEHW0052 C27 ACERT Module........... LEHW0115
C18 ACERT (T4F).............. LEHW0109 C27 ACERT (T4i)............... LEHW0101
3500 L A N D DRILLING

Model Duty bkW bhp rpm Emissions
3508 A 507 680 1200 NC
3508 Drill-M 567 760 1200 NC
3508 C 611 820 1300 NC
3508 A 638 855 1800 NC
3508 C 746 1000 1800 NC
3512 A 761 1020 1200 NC
3512 Drill-M 764 1025 1200 NC
3512 C 858 1150 1300 NC
Land Mechanical Drilling Engine Ratings 3512 Drill-M 932 1250 1200 NC
Rating Tier bkW bhp rpm Emissions 3512 A 955 1280 1800 NC
A 597 800 1800-2100 EPA T2 NR, China III NR, IMO II 3512 C 1119 1500 1800 NC
B 708 950 1800-2100 EPA T2 NR, China III NR, IMO II, EPA ESE 3516 Drill-M 1230 1649 1200 NC
C 839 1125 1800-2100 EPA T2 NR, China III NR, IMO II, EPA ESE
D 895 1200 1800-2100 EPA T2 NR, China III NR, IMO II, EPA ESE
E 1007 1350 1800-2100 EPA T2 NR, China III NR, IMO II, EPA ESE
E 1119 1500 1800-2100 IMO II Land Electric-Drive Drilling Module Ratings
B 708 950 1800-2100 EPA T4i NRNG Model Duty bkW ekW kVA bhp Emissions
C 839 1125 1800-2100 EPA T4i NRNG 50 Hz/1500 rpm
D 895 1200 1800-2100 EPA T4i NRNG
3512 Drill-El 1090 990 1680 1462 NC
B 746 1000 1800 EPA T4f NRNG
C 839 1125 1800 EPA T4f NRNG
D 895 1200 1800 EPA T4f NRNG
Land Electric Drilling Module Ratings

50 Hz/1500 rpm
Prime 882 700 1000 1182 NC
60 Hz/1800 rpm
Prime 1008 910 1300 1351 NC
L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in3) L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in3)
C32 ACERT 1918 (75.5) 1473 (58) 1321 (52) 2895 (6382) 32 (1953) 3508 Engine 2136 (84.1) 1702 (67.0) 1720 (67.7) 4309 (9500) 35 (2105)
C32 ACERT T4 1905 (75) 1600 (63) 1549 (61) 3107 (6850) 32 (1953) 3508 Module 7874 (310) 2385 (93.9) 2779 (109.4) 14 443 31,847) 35 (2105)
C32 ACERT 3512 Engine 2675 (105.3) 1702 (67.0) 1720 (67.7) 5203 (11,471) 52 (3158)
Module 5228 (206) 1905 (75 ) 2180 (86) 9299 (20,500) 32 (1953) 3512 Module 7874 (310) 2385 (93.9) 2936 (115.6) 15 714 (34,643) 52 (3158)
Bore x Stroke – mm (in) 145 x 162 (5.7 x 6.4) 3516 Engine 3251 (128) 1701 (67.0) 2004 (78.9) 8659 (19,090) 69 (4210)
Please see spec sheet for more information: Bore x Stroke – mm (in) 170 x 190 (6.7 x 7.5)
C32 ACERT (T2)................ LEHW0049 Please see spec sheet for more information:
C32 ACERT (T4i)............... LEHW0100 3508 Engine................ LEHW0058 3512 Engine................ LEHW0060
C32 ACERT Module........... LEHW0110 3508 Module............... LEHW0069 3512 Module............... LEHW0066
3500B L A N D DRILLING
3500C L A N D DRILLING

3508C Drill-M 671 900 1200 China III NR, EPA T2 NR
Model Duty bkW bhp rpm Emissions 3512C HD Drill-M 932 1250 1200 China III NR, EPA T2 NR
3508B Drill-M 671 900 1200 NC 3512C HD Drill-M 1100 1475 1200 China III NR, EPA T2 NR
Land Electric-Drive Drilling Engine Ratings Land Electric-Drive Drilling Engine Ratings
3508C Drill-El 682 915 1200 China III NR, EPA T2 NR
3508B Drill-El 682 915 1200 NC
3512C Drill-El 1101 1475 1200 EPA T2 NR
3512B Drill-El 1101 1475 1200 NC
3512C Drill-El 1305 1750 1200 EPA T2 NR
3512B with DGB Drill-El 933 1251 1000 NC
Land Electric-Drive Drilling Module Ratings Land Electric-Drive Drilling Module Ratings
Model Duty bkW ekW kVA bhp Emissions Model Duty bkW ekW kVA bhp Emissions
60 Hz/1200 rpm 50 Hz/1500 rpm
3512B Drill-El 1101 995 1673 1476 NC 3512C Drill-El 1310 1245 1993 1757 China III NR
3512B with DGB Drill-El 1101 995 1673 1476 NC 60 Hz/1200 rpm
3516B Drill-El 1383 1285 2150 1855 NC EPA T2 NR,
50 Hz/1500 rpm 3512C Drill-El 1101 995 1673 1476
China III NR
3512B Drill-El 1310 1200 1993 1757 NC
3512C Drill-El 1305 1190 2113 1750 EPA T2 NR
3512B with DGB Drill-El 1310 1200 1993 1757 NC
L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in ) 3 L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in3)
3508B Engine 2136 (84.1) 1702 (67) 2024 (79.7) 4309 (9500) 35 (2105) 3508C Engine 2136 (84.1) 1702 (67.0) 2024 (79.7) 4582 (10,101) 35 (2105)
3508B Module 4986 (196.3) 2319 (91.3) 2596 (102.2) 15 352 (33,846) 35 (2105) 3512C Module 6051 (238.2) 2318 (91.2) 2659 (104.7) 14 453 (31,864) 52 (3158)
3512B Engine 2675 (105.3) 1702 (67) 1720 (67.7) 5203 (11,471) 52 (3158) 3512C HD
3512B Module 6051 (238.2) 2318 (91.2) 2659 (104.7) 14 000 (30,864) 52 (3158) Engine 2682 (105.6) 1790 (70.5) 2019 (79.5) 5423 (11,945) 59 (3574)
3516B DGB Module 5841 (230.0) 2318 (91.2) 2662 (104.8) 13 545 (29,861) 52 (3158) Module 6035 (237.6) 2320 (91.4) 2636 (103.8) 14 720 (32,452) 59 (3574)
3516B Module 7874 (310.0) 2385 (93.9) 2520 (99.2) 18 810 (41,469) 69 (4210) Bore x Stroke – mm (in) 170 x 190 (6.7 x 7.5)
Bore x Stroke – mm (in) 170 x 190 (6.7 x 7.5) Bore x Stroke HD – mm (in) 170 x 215 (6.7 x 8.5)

3508C Engine........ LEHW0059, LEHW0071 3512C Module...................... LEHW0068
3508B Engine................ LEHW0057 3512B DGB Module........ LEHW0200
3512C HD Engine................... LEHW0048 3512C (DGB) Module.............. LEHW0138
3508B Module............... LEHW0070 3516B Module.............. LEHW0065
3512C HD China III NR............. LEHW0241 3512C HD Module................. LEHW0013
3512B Module............... LEHW0067, LEHW0170
3500E L A N D DRILLING
3512 L A N D DRILLING
Land Electric-Drive Drilling Engine Ratings Land Electric-Drive Drilling Engine Ratings
Model Duty bkW bhp rpm Emissions Model Duty bkW bhp rpm Emissions
3512E Drill-El 1102 1477 1200 EPA T4F NRNG G3512 Continuous 1095 1468 1800 EPA NRM
3512E Drill-El 1306 1750 1200 EPA T4F NRNG
Specifications
Land Drilling Energy Storage System Ratings
Model Duty Power (kW) Energy(kWh)
3512E Engine 3327 (131) 1829 (72) 1981 (78) 7711 (17,000) 59 (3600)
PGS1260 HD Continuous 1000 672
Specifications
L – mm (in) W – mm (in) H – mm (in) Disp – L (in3)
3512 Engine 4979.3 (196.0) 2154.4 (84.8) 2277.1 (89.6) 52 (3173)
L – m (ft) W – m (ft) H – m (ft) Weight - kg (lbs)

PGS1260 HD 6.1(20) 2.4 (8) 2.8 (9.5) 16,500 (36,376)

Please see spec sheet for more information: 3512 Engine.................... LEHW20188-00
3500E Engine........................ LEHW0282 PGS1260 HD........................ LEHW0282
R A T I N G S G U I D E 52 R A T I N G S G U I D E 53
Drilling Transmission Application Chart
Land Production Ratings
Engine Transmission Max hp Page Number
C15 CX31-P600 600 33

ACERT
CX38-P892 875 35
C18
CX38-P892 875 35
ACERT
C27
TH48-E70 1200 39
ACERT
C32 1500 39
TH48-E70
ACERT
The broad line of Cat engines and generator sets is the preferred
choice in a variety of production applications worldwide. Known for
reliability and durability, Cat engines are used in the most demanding
applications in the oilfield. Cat engines have high fuel efficiency, low
life cycle costs, simple installation and start-up, and fuel flexibility
including CRU, gas, and dual fuel.
Diesel Generator Sets
LAND
Diesel Generator Sets
LAND
PRODUCTION PRODUCTION
50 Hz Oilfield Diesel Generator Set Ratings –

365-1000 kVA Ratings continued from page 56
Model Duty bkW ekW kVA bhp Emissions
kVA ekW Generator Emissions/
1500 rpm Set Model Configuration
Standby Prime Cont. Standby Prime Cont.
C15 ACERT Prime 331 292 365 444 EU II NRNC, China II NRNC, NC
C15 ACERT Prime 410 364 455 549 EU II NRNC, China II NRNC, NC 1500 rpm
C18 ACERT Prime 483 436 545 647 EU II NRNC, China II NRNC, NC Low BSFC,
2500 2275 2000 2000 1820 1600 3516B HD Low Emissions
C32 ACERT Prime 882 800 1000 1182 NC
2750 2500 – 2200 2000 – 3516C HD Low BSFC
50 Hz Generator Set Ratings – 365-7150 kVA 3000 2725 2500 2400 2180 2000 C175-16 Low BSFC
kVA ekW Generator Emissions/ 3000 – – 2400 – – C175-16 Low Emissions
Standby Prime Cont. Standby Prime Cont. Set Model Configuration 3100 2825 2600 2480 2260 2080 C175-16 Low BSFC
1500 rpm 3100 – – 2480 – – C175-16 Low Emissions
– 350 – – 280 – C13 China III NR 3900 3500 3150 3120 2800 2520 C175-20 Low BSFC
– 400 – – 320 – C13 China III NR 3900 – – 3120 – C175-20 Low Emissions
– 450 – – 360 – C15 NC 4000 3600 3250 3200 2880 2600 C175-20 Low BSFC
– 500 – – 400 – C15 NC 4000 – – 3200 – – C175-20 Low Emissions
500 450 – 400 360 – C15 NC 1000 rpm
550 500 – 440 400 – C15 NC
– 2425 2200 – 1940 1760 3606 NC
605 550 – 484 440 – C18 NC
528 480 – – 2000 – – 1600 3606 NC
660 600 – – C18 NC
715 650 – 572 520 – C18 NC – – 2938 – – 2350 3608 NC
800 725 – 640 580 – 3412C Low BSFC – 3250 – – 2600 – 3608 NC
900 810 – 720 648 – 3412C Low BSFC – 4850 4400 – 3880 3520 3612 NC
1250 1100 – 1000 880 – C32 Low BSFC 5375 – – 4300 – – 3612 NC
1100 1000 910 880 800 728 C32 Low BSFC – 6500 – – 5200 – 3616 NC
1250 1150 1000 1000 920 800 3512 Low BSFC 7150 – 5875 5720 – 4700 3616 NC
1400 1275 1206 1120 1020 965 3512 Low BSFC – 2425 2200 – 1940 1760 C280-6 NC
– 3250 – – 2600 – C280-8 NC
Low BSFC,
1500 1360 – 1200 1088 – 3512B Low Emissions – – 2938 – – 2350 C280-8 NC
Low BSFC, – 4850 4400 – 3880 3520 C280-12 NC
1600 1500 1320 1280 1200 1056 3512B Low Emissions – 6500 5875 – 5200 4700 C280-16 NC
Low BSFC,
1750 1600 – 1400 1280 – 3512B HD Low Emissions
Low BSFC,
1875 1700 1500 1500 1360 1200 3512B HD Low Emissions
2000 1825 1600 1600 1460 1280 3516 Low BSFC
Low BSFC,
– 2000 1750 – 1600 1400 3516B Low Emissions
Diesel Generator Sets Diesel Generator Sets P R O D U C T I O N
LAND LAND
PRODUCTION

60 Hz Generator Set Ratings – 180-16296 ekW 60 Hz Generator Set Ratings – 180-16296 ekW
kVA ekW Generator Emissions/ kVA ekW Generator Emissions/
Standby Prime Cont. Standby Prime Cont. Set Model Configuration Standby Prime Cont. Standby Prime Cont. Set Model Configuration
1800 rpm 1800 rpm (continued)
156 142 – 125 114 – C7.1 ACERT EPA ESE 938 906 – 750 680 – C27 ACERT EPA ESE
187 169 – 150 135 – C7.1 ACERT EPA ESE 1000 906 – 800 725 – C27 ACERT EPA ESE
219 197 – 175 157 – C7.1 ACERT EPA ESE – 1035 – – 725 – C27 ACERT NC, LOW BSFC
250 – – 200 – – C7.1 ACERT EPA ESE + T4F
– 907 – – 725 – C27 ACERT NC, LOW BSFC
250 225 – 200 180 – C9 ACERT EPA ESE
– 1035 – – 725 – C27 ACERT NC, LOW EMISSIONS
313 281 – 250 225 – C9 ACERT EPA ESE
– 907 – – 725 – C27 ACERT NC, LOW EMISSIONS
375 344 – 300 275 – C9 ACERT EPA ESE
438 400 – 350 320 – C13 ACERT EPA ESE 1250 1138 1038 1000 910 830 C32 ACERT NC, EPA ESE, EPA T2
500 456 – 400 365 – C13 ACERT EPA ESE – 1300 – – 910 – C32 ACERT NC
438 400 – 350 320 – C15 ACERT EPA ESE – 1137 – – 910 – C32 ACERT NC
1375 1250 1113 1100 1000 890 3512 NC
500 456 – 400 365 C15 ACERT EPA ESE
– 1594 – – 1275 – 3512B NC, LOW BSFC
563 513 – 450 410 – C15 ACERT EPA ESE
625 569 – 500 455 – C15 ACERT EPA ESE – 1700 1538 – 1360 1230 3512B NC, LOW BSFC
688 625 – 550 500 – C18 ACERT EPA ESE 1875 – – 1500 – – 3512C EPA ESE
750 681 – 600 545 – C18 ACERT EPA ESE – 1700 1538 – 1360 1230 3512C NC, EPA ESE
813 750 – 650 600 – C18 ACERT EPA ESE 2188 – – 1750 – – 3512C NC, EPA ESE
875 794 – 700 635 – C18 ACERT EPA ESE 2188 2000 1813 1750 1600 1450 3516 NC
938 850 – 750 680 – C18 ACERT EPA ESE 2500 – – 2000 – – 3516B NC
875 794 – 700 635 – 3412STA NC – 2281 2050 – 1825 1640 3516B NC
1000 906 – 800 724 – 3412STA NC 2813 – – 2250 – – 3516B NC
– 2281 2063 – 1825 1650 3516C NC, EPA ESE
2500 – – 2000 – – 3516C NC, EPA ESE
– 2813 2563 – 2250 2050 3516C NC, EPA ESE
3125 – – 2500 – – 3516CHD NC, EPA ESE
2500 2281 – 2000 1825 – 3516CHD EPA T4F
3125 2813 – 2500 2250 – 3516CHD EPA T4F
* Package available through DTO
Ratings continued on page 59 Ratings continued on page 60
Diesel Generator Sets P R O D U C T I O N
LAND
Diesel Generator Sets P R O D U C T I O N
LAND
Ratings continued from page 59 Ratings continued from page 60

60 Hz Generator Set Ratings – 180-16296 ekW 60 Hz Generator Set Ratings – 180-16296 ekW
kVA ekW Generator Emissions/ kVA ekW Generator Emissions/
Standby Prime Cont. Standby Prime Cont. Set Model Configuration Standby Prime Cont. Standby Prime Cont. Set Model Configuration
900 rpm 720/750 rpm

– 1963 – – 1570 – 3606 NC
– 2275 2063 – 1820 1650 3606 NC
– 1906 – – 1525 – 3606 NC
– – 1875 – – 1500 3606 NC
– 2600 – – 2080 – 3608 NC
– – 2500 – – 2000 3608 NC
– 2525 – – 2020 – 3608 NC
– 3025 – – 2420 – 3608 NC
– 3925 – – 3140 – 3612 NC
– – 2750 – – 2200 3608 NC
– 3813 – – 3050 – 3612 NC
– 4550 4125 – 3640 3300 3612 NC
– 5200 – – 4160 – 3616 NC
5000 – – 4000 – – 3612 NC
– 5050 – – 4040 – 3616 NC
– – 3750 – – 3000 3612 NC
1
Dependent on generator selection and power–factor. 3616 – – – 1900 1735 1735 6CM25C NC
– 6050 – – 4840 NC
– – – 2500 2315 2315 8CM25C NC
6650 – 5500 5320 – 4400 3616 NC
– – – 2800 2600 2600 9CM25C NC
– – 5000 – – 4000 3616 NC
– – – 2000 1940 1940 6CM25E NC
– 2275 2063 – 1820 1650 C280-6 NC
– – – 2700 2585 2585 8CM25E NC
– 3025 2750 – 2420 2200 C280-8 EPA T4F
– – – 3000 2910 2910 9CM25E NC
– 3025 2750 – 2420 2200 C280-8 NC
– – – 2800 2780 2780 6CM32C NC
– 4550 4125 – 3640 3300 C280-12 NC
– – – 3800 3700 3700 8CM32C NC
– 4550 4125 – 3640 3300 C280-12 EPA T4i
– – – 4300 4170 4170 9CM32C NC
– 6050 5750 – 4840 4600 C280-16 EPA T4i
– – – 5880 5880 5880 12CM32C NC
– 6050 5500 – 4840 4400 C280-16 NC
– – – 7840 7840 7840 16CM32C NC
– – – 1040 985 985 6CM20C NC
– – – 3400 3085 3085 6CM32E NC
– – – 1380 1310 1310 8CM20C NC
– – – 4500 4115 4115 8CM32E NC
– – – 1500 1475 1475 9CM20C NC
– – – 5100 4630 4630 9CM32E NC
– – – 6500 6170 6170 12CM32E NC
– – – 8700 8230 8230 16CM32E NC
600 rpm
3600 3456 3456 2940 2822 2822 6CM32C Low BSFC
4800 4608 4608 3920 3763 3763 8CM32C Low BSFC
5400 5184 5184 4410 4233 4233 9CM32C Low BSFC
500/514 rpm
7639 6839 6839 6100 5579 5579 6CM43C Low BSFC
8912 7978 7978 7100 6440 6440 7CM43C Low BSFC
10185 9118 9118 8100 7438 7438 8CM43C Low BSFC
11458 10258 10258 9200 8290 8290 9CM43C Low BSFC
15278 13677 13677 12300 11170 11170 12CM43C Low BSFC
20370 18236 18236 16400 14890 14890 16CM43C Low BSFC
Dependent on generator selection and power factor.
1
Dual Fuel Generator Sets Gas Generator Sets
LAND LAND
PRODUCTION PRODUCTION
50 Hz Oilfield Generator Set Ratings – 110-1560 ekW

Generator Set Ratings – 1056-17460 ekW ekW rpm Generator Set Model
1500 rpm
ekW kVA Duty Generator Set Model Notes
1560 1500 CG170-16
60 Hz – 1800 rpm
Diesel with up to 70%
1360 1700 Prime 3512B with DGB
NG/LNG/CNG/FG 50 Hz Generator Set Ratings – 70-9700 ekW
50 Hz – 1500 rpm ekW rpm Generator Set Model
Diesel with up to 70% 1500 rpm
1056 1320 Cont 3512B with DGB
NG/LNG/CNG/FG 125 1500 G3406
Diesel with up to 70% 160 1500 G3406
1200 1500 Prime 3512B with DGB 360 1500 G3412C
NG/LNG/CNG/FG
Diesel with up to 70% 400 1500 CG132-8
1600 2000 Prime 3516B with DGB 480/495/510 1500 G3508
NG/LNG/CNG/FG
50/60 Hz – 500/514 rpm 600 1500 CG132-12
725 1500 G3512
5290 – Cont 6CM46DF CRU/HFO with NG/LNG
800 1500 CG132-16
6170 – Cont 7CM46DF CRU/HFO with NG/LNG 984 1500 G3512E
7050 – Cont 8CM46DF CRU/HFO with NG/LNG 975/1030 1500 G3516
7930 – Cont 9CM46DF CRU/HFO with NG/LNG 1184 1500 G3512E
10580 – Cont 12CM46DF CRU/HFO with NG/LNG 1200 1500 CG170-12
1555 1500 G3516C
14110 – Cont 16CM46DF CRU/HFO with NG/LNG
1560 1500 CG170-16
1990/2000 1500 G3516H
1972 1500 G3520C
1995 1500 G3520E
2000 1500 CG170-20
2000 1500 G3520
2486 1500 G3520H
1000 rpm
1679 1000 G3608
2515 1000 G3612
3333 1000 CG260-12
3355 1000 G3616
4300 1000 CG260-16
750 rpm
6580 750 G16CM34
10300 750 G20CM34
Gas Generator Sets LAND
PRODUCTION Diesel Engines
LAND
PRODUCTION
60 Hz Oilfield Generator Set Ratings – 131-1500 ekW Mechanical Drive Engine Ratings; Highly Regulated
ekW rpm Generator Set Model Emissions Areas – 116-839 bkW
1800 rpm
131 1800 G3306B NRM, Stationary Model bkW bhp rpm Emissions
400 1800 CG137-12 NRM EPA T4f, EU Stage V, Japan
1200 rpm C9 .3B ATAAC 250 335 1800-2200 MLIT T4f, South Korea MOE
360 1200 G3508 NC T4f UN R120, IMO III
555/560/570 1200 G3512 NC
765/770 1200 G3516 NC EPA T4f, EU Stage V, Japan
C9 .3B ATAAC 280 375 1800-2200 MLIT T4f, South Korea MOE
T4f UN R120, IMO III
EPA T4f, EU Stage V, Japan
60 Hz Generator Set Ratings – 85-9700 ekW C9 .3B ATAAC 310 415 1800-2200 MLIT T4f, South Korea MOE
ekW rpm Generator Set Model
1500 rpm with gearbox EPA T4f, EU Stage V, Japan
1966 1500 G3516H C9 .3B ATAAC 340 455 1800-2200 MLIT T4f, South Korea MOE
2476 1500 G3520H T4f UN R120, IMO III
1800 rpm
400 1800 CG137-12 EPA T4f, EU Stage V, Japan
400 1800 CG132-8 C9 .3B ATAAC 340 456 1800-2100 MLIT T4f, South Korea MOE
350/375 1800 G3412 TA T4f UN R120, IMO III
423 1800 G3412C
1300 1800 G3516B T4f UN R120, IMO III
1650/1660 1800 G3516C
2050 1800 G3520C
2500 1800 G35201 C9 .3B ATAAC 400 536 1800-2100 MLIT T4f, South Korea MOE
900 rpm T4f UN R120, IMO III
1510 900 G3608 EPA T4f, EU Stage V, Japan
2263 900 G3612
3000 900 CG260-12
3020 900 G3616 T4f UN R120, IMO III
720 rpm
6580 720 G16CM34
9800 720 G20CM34 EPA T4f, EU Stage V, Japan
EPA NRM emission compliant

1
Diesel Fuel Engines LAND
PRODUCTION Gas Engines LAND
PRODUCTION
Ratings continued from page 65 Mechanical Drive Engine Ratings – 71-10000 bkW
Mechanical Drive Engine Ratings; Lesser Regulated Model bkW bhp rpm
Areas – 168-15040 bkW G3304B 71 95 1800
Model bkW bhp rpm Fuel G3306B 108, 151, 157 145, 203, 211 1800
China Stage II, EPA T3, G3406 TA 242 325 1800
C7.2 ACERT 167 255 1800-2200
EU Stage III A, IMO II
G3408 190/298 255/400 1800
China Stage II, EPA T3,
C7.2 ACERT 187 250 1800-2200 G3408C 317 425 1800
China Stage II, EPA T3, G3412 TA 448 600 1800
C7.2 ACERT 224 300 1800-2200
EU Stage III A, IMO II CG137-8 298 400 1800
China Stage II, EPA T3,
C15 ACERT 403 540 1800-2100 CG137-12 447 600 1800
China Stage II, EPA T3, G3412C 475 637 1800
C15 ACERT 433 580 1800-2100
EU Stage III A, IMO II G3508 TA 391 524 1200
China Stage II, EPA T3, G3508 500 670 1400
C18 ACERT 522 700 1800-2100
G3508B 515 690 1400
C27 ACERT 708 950 1800-2100 EPA T2, IMO II
C27 ACERT 783 1050 1800-2100 EPA T2, IMO II G3512 TA 589 790 1200
3508 637 855 1800 NC G3512 LE 642 860 1200
3508 578 775 1800 NC G3512 LE 749 1005 1400
3508B 671 900 1200 NC
G3512B 772 1035 1400
C32 839 1125 1800-2100 EPA T2, IMO II
C32 895 1200 1800-2100 EPA T2, IMO II G3516 NA 492 660 1200
3512 955 1280 1800 NC G3516 LE 858 1150 1200
3516 1275 1710 1800 NC G3516 TA 1030 1380 1400
3516 1011 1355 1200 NC
G3516 LE 1000 1340 1400
3516 1230 1649 1200 NC
6CM20C 1140 1529 1000 Diesel/HFO/CRU G3516B 1029 1380 1200
8CM20C 1520 2038 1000 Diesel/HFO/CRU G3516J 1029 1380 1400
9CM20C 1710 2293 1000 Diesel/HFO/CRU G3520B 1104 1480 1200
6CM25C 1800 2414 750 Diesel/HFO/CRU
G3520B 1286 1725 1400
8CM25C 2400 3218 750 Diesel/HFO/CRU
9CM25C 2700 3621 750 Diesel/HFO/CRU G12CM34 4575 6135 750
6CM32C 2700 – 600 Diesel/HFO/CRU G16CM34 6100 8180 750
8CM32C 3600 – 600 Diesel/HFO/CRU G3606 A4 1398 , 1454, 1499 1875, 1950, 2010 1000
9CM32C 4050 – 600 Diesel/HFO/CRU G3608 A4 1864, 1931, 1995 2500, 2590, 2675 1000
6CM32E 3000 – 750 Diesel/HFO/CRU
8CM32E 4000 – 750 Diesel/HFO/CRU G3612 A4 2796, 2890, 2983 3750, 3875, 4000 1000
9CM32E 4500 – 750 Diesel/HFO/CRU G3616 A4 3728, 3859, 3989 5000, 5175, 5350 1000
Hazardous Location O F F S H O R E
Offshore Drilling and
Production Ratings
Generator Sets
Cat hazardous location generator sets combine the C15 ACERT – 1500 and
1800 rpm, C32 ACERT – 1500 and 1800 rpm, 3512C – 1800 rpm and 3516C –
1800 rpm to meet Class I Division 2 requirements for core engine electronics
and on-site needs. Contact the Application Support Center for additional
information.
Offshore Hazardous Location Generator Set Ratings

Model Duty bkW ekW Configuration
1500 rpm/50 Hz
C15 ACERT OS-Prime 360 288 Haz Loc
1800 rpm/60 Hz
3512C HD OS-Prime 1802 1730 Haz Loc
3516C HD OS-Prime 2210 2100 Haz Loc
Cat engines and generator sets are widely known for performance,
reliability, durability, and fuel flexibility in the offshore oil and gas industry.
With ratings capable of operating on MDO, CRU, and dual fuel, offshore
products include generator sets for main, essential, and emergency
power plus a wide range of fire pump and crane engines. The global Cat
dealer network covers offshore operations with warranty, parts, service,
and technical support any time, anywhere.
3500B O F F S H O R E 3500C • 3500E O F F S H O R E
Offshore Generator Set Ratings

Model Duty bkW ekW1 kVA1 Emissions
1200 rpm/60 Hz
3512C MCR 1101 1030 1470 IMO II
Offshore Generator Set Ratings 3516C HD* MCR 1383 1285 1836 IMO II/III3
Model Duty bkW ekW1 kVA1 Emissions 3516C HD* MCR 1603 1530 2186 IMO II/III3
1500 rpm/50 Hz
1500 rpm/50 Hz
3508C OS-Prime 673 640 799 IMO II
3512B OS-Prime 1257 1200 1500 IMO II 3508C OS-Prime 820 780 974 IMO II
3516B OS-Prime 1717 1600 2000 IMO II 3512C-HD OS-Prime 1362 1294 1618 IMO II
1800 rpm/60 Hz 3516C-HD OS-Prime 1717 1631 2039 IMO II
3508B OS-Prime 968 910 1138 IMO I 3516C-HD OS-Prime 1940 1843 2304 IMO II
1800 rpm/60 Hz
3512B OS-Prime 1424 1360 1700 IMO I
3512C OS-Prime 1432 1360 1700 IMO II
3516B OS-Prime 1901 1825 2281 IMO I 3512C HD OS-Prime 1632 1550 1938 IMO II
3512C HD OS-Prime 1790 1700 2125 IMO II
3516C HD OS-Prime 2350 2250 2813 IMO II
3512E OS- Prime 1632 1550 1938 IMO III
3512E OS- Prime 1789 1700 2125 IMO III
3516E OS- Prime 1921 1825 2281 IMO III
Specifications2 3516E OS- Prime 2105 2000 2500 IMO III
3516E OS- Prime 2368 2250 2813 IMO III
*Available with increased exhaust backpressure. Dimensions and weights are dependent on
2
3508B 4031 (158.7) 1784 (70.2) 2048 (80.6) 12 475 (27,503) 35 (2116)
Dependent on generator selection and power
1 generator and options selected. See general
3512B 4660 (183.5) 1988 (78.3) 2043 (80.4) 14 975 (33,014) 52 (3161) installation drawings for details.
factor.
3516B 6095 (240) 2147 (84.5) 2106 (82.9) 17 500 (38,580) 69 (4233) IMO III engines require SCR aftertreatment.
3
3516B HD 6095 (240) 2147 (84.5) 2214 (87.2) 18 800 (41,400) 78 (4764) Contact dealer for availability and technical details.
Bore x Stroke – mm (in) 170 x 190 (6.7 x 7.5) Specifications2
Bore x Stroke – mm (in) HD 170 x 215 (6.7 x 8.5) L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in3)
1
Dependent on generator selection and power factor. 3512C 5448 (214.5) 1825 (71.9) 2313 (91) 14 975 (33,300) 51.8 (3161)
3516C HD 6705 (264) 1986 (78.2) 2535 (99.8) 18 800 (41,400) 78 (4764)
Dimensions and weights are dependent on generator and options selected. See general
2
3512E min 2644 (104.1) 2113 (83.2) 2036 (80.2) 4960 (10,395) 34.5 (2107)
installation drawings for details. max 3272 (128.8) 2154 (84.8) 2160 (85.0)
3512E min 3185 (125.4) 2130 (83.9) 2142 (84.3) 6532-7411 (14,400-16,340) 51.8 (161)
max 3185 (125.4) 2130 (83.9) 2142 (84.3)
Bore x Stroke HD – mm (in) 170 x 215 (6.7 x 8.5)
3508B..................................... LEHW0123
3512B....................... LEHW0124, LEHW0125 Please see spec sheet for more information:
3516B....................... LEHW0126, LEHW0127 3512C........................... LEHW0078 3516C HD.............. LEHW0073, LEHW0155
C175 O F F S H O R E CM20 O F F S H O R E
Offshore Generator Set Rating Offshore Generator Set Ratings1

Model Duty bkW ekW 1
kVA 1
Emissions Model Duty bkW ekW2 kVA2 Emissions
1200 rpm/60 Hz 900 rpm/60 Hz
C175-16* MCR 1930 1833 2619 IMO II/III3 6CM20C Prime 1080 1037 1296 IMO II
C175-16 MCR 2316 2200 3142 IMO II/III 8CM20C Prime 1440 1382 1728 IMO II
1500 rpm/50 Hz
9CM20C Prime 1620 1555 1944 IMO II
C175-16 OS-Prime 2418 2300 2875 IMO II
1000 rpm/50 Hz
1800 rpm/60 Hz
6CM20C Prime 1200 1152 1440 IMO II
C175-16 OS-Prime 2800 2660 3325 IMO II
8CM20C Prime 1600 1536 1920 IMO II
9CM20C Prime 1800 1728 2160 IMO II
Specifications2
1
Ratings Available in MDO, HFO, and crude oil fuel. ISO 3046-1 reference conditions.
L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in3) 2
Generator efficiency of 96% and 0.8 power factor.
C175-16 50 Hz 6782 (267) 2413 (95) 2928 (115) 25 991 (57,300) 85 (5164)
C175-16 60 Hz 6742 (265) 2125 (84) 2916 (115) 24 312 (53,599) 85 (5164)
Specifications3
L – mm (in) W – mm (in) H – mm (in) Wt – tonnes (lbs) Disp – L (in3)
*Available with increased exhaust backpressure.
6CM20C 6073 (239.1) 1680 (66.1) 2833 (111.5) 18.8 (42,000) 57 (3480)
1
Dependent on generator selection and power factor. 8CM20C 6798 (267.6) 1816 (71.5) 3010 (118.5) 23.1 (51,000) 75 (4580)
2
9CM20C 7125 (280.6) 1817 (71.5) 3011 (118.5) 30.0 (67,000) 85 (5190)
installation drawings for details.
IMO III engines require SCR aftertreatment. Contact dealer for availability and technical
3
3
Base-mounted generator sets. Final dimensions dependent on generator make/type.
details.

6CM20C......................... LEPW0045
Please see spec sheet for more information: 8CM20C......................... LEPW0046
C175-16 50 Hz.................. LEHW0151 C175-16 60 Hz................ LEHW6097 9CM20C......................... LEPW0047
CM25 O F F S H O R E C280 O F F S H O R E
Offshore Generator Set Ratings1 Offshore Generator Set Ratings

Model Duty bkW ekW2 kVA2 Emissions Model Duty bkW ekW1 kVA1 Emissions
750/720 rpm – 50/60 Hz 900 rpm/60 Hz
6CM25E Prime 2100 2016 2520 IMO II C280-6 Cont 1730 1650 2063 IMO II
C280-6 Cont 1900 1820 2275 IMO II
8CM25E Prime 2800 2688 3360 IMO II
C280-8 Cont 2300 2200 2250 EPA T4i / IMO III
9CM25E Prime 3150 3024 3760 IMO II
C280-8 Cont 2530 2420 3025 EPA T4i / IMO III
1
C280-8 Cont 2300 2200 2750 IMO II
2
C280-8 Prime 2530 2420 3025 IMO II
C280-8 MCR 2530 2420 3025 IMO II
C280-12 Cont 3460 3300 4125 IMO II
C280-12 Prime 3800 3640 4550 IMO II
Specifications3 C280-12 Cont 3460 3300 4125 EPA T4i / IMO III
L – mm (in) W – mm (in) H – mm (in) Wt – tonnes (lbs) Disp – L (in3) C280-12 MCR 3800 3650 4563 IMO II
6CM25E 7579 (298.4) 2357 (92.8) 3866 (152.2) 43 (95,000) 123 (7505) C280-12 MCR 3800 3650 4563 IMO II
8CM25E 8313 (327.3) 2358 (92.8) 4066 (160.1) 53 (117,000) 163 (9946) C280-16 Cont 4600 4400 5500 EPA T4i / IMO III
9CM25E 9302 (366.2) 2359 (92.8) 4801 (189.0) 56 (124,000) 184 (11,227)
C280-16 Prime 5060 4840 6050 EPA T4i / IMO III
Bore x Stroke – mm (in) 255 x 400 (10 x 15.7)
C280-16 Cont 4600 4400 5500 IMO II
3
C280-16 Prime 5060 4840 6050 IMO II
C280-16 MCR 5730 5500 6875 IMO II
C280-16 MCR 5730 5500 6875 IMO II
C280-16 MCR 5060 4840 6050 IMO II
* Available with front- or rear-mounted turbochargers.

** Front-mounted turbochargers, all other ratings are rear-mounted turbochargers.
T
Available with increased exhaust backpressure.
6CM25E......................... LEPW0285
1
Dependent on generator selection and power factor.
8CM25E......................... LEPW0286 IMO III engines require SCR aftertreatment. Contact dealer for availability and technical
2
9CM25E......................... LEPW0287 details.
For diesel engine rating definitions please see page 10. Ratings continued on page 76
C280 O F F S H O R E CM32 O F F S H O R E

1000 rpm/50 Hz
C280-6 Cont 1850 1760 2200 IMO II
C280-6 Cont 2030 1940 2425 IMO II
C280-8 Prime 2710 2600 3250 IMO II
Offshore Generator Set Ratings1
C280-8 Cont 2460 2350 2938 IMO II
C280-8 MCR 2710 2600 3250 IMO II
600 rpm – 50/60 Hz
C280-12 Cont 3700 3520 4400 IMO II
C280-12 Prime 4060 3880 4850 IMO II 6CM32C Prime 3000 2880 3600 IMO II
C280-12 MCR 4060 3900 4875 IMO II 8CM32C Prime 4000 3840 4800 IMO II
C280-16 Cont 4920 4700 5875 IMO II 9CM32C Prime 4500 4320 5400 IMO II
C280-16 Prime 5420 5200 6500 IMO II 750/720 rpm – 50/60 Hz
C280-16 MCR 5420 5200 6500 IMO II 6CM32E Prime 3480 – – IMO II
8CM32E Prime 4640 – – IMO II
Specifications3 9CM32E Prime 5220 – – IMO II

L – mm (in) W – mm (in) H – mm (in) Wt – tonnes (lbs) Disp – L (in ) 3

C280-8 8140 (320.5) 2326 (91.6) 3406 (134.1) 49 (108,027) 148 (9031)
C280-12 8125 (319.9) 2568 (101.1) 3973 (156.4) 56.5 (124,561) 222 (13,546)
C280-16 FMT 10283 (404.8) 2800 (110.2) 4092 (161.1) 66 (145,505) 296 (18,062)
C280-16 RMT 9873 (388.7) 2931 (115.4) 4092 (161.1) 64 (141,096) 296 (18,062) 1
Bore x Stroke – mm (in) 280 x 300 (11 x 11.8) 2
3 Specifications4
installation drawings for details. L – mm (in) W – mm (in) H – mm (in) Wt – tonnes (lbs) Disp – L (in3)
6CM32C 9302 (366.2) 2639 (103.9) 4801 (189.0) 73.0 (161,000) 232 (14,156)
8CM32C 10 886 (427.6) 2600 (102.4) 4869 (191.7) 92.0 (203,000) 309 (18,855)
9CM32C 11 419 (449.6) 2600 (102.4) 4869 (191.7) 98.0 (217,000) 347 (21,173)
6CM32E 9566 (376.6) 2639 (103.9) 4567 (179.8) 73.0 (161,000) 232 (14,156)
8CM32E 10 626 (418.3) 2600 (102.4) 4869 (191.7) 92.0 (203,000) 309 (18,855)
9CM32E 11 156 (439.2) 2600 (102.4) 4869 (191.7) 98.0 (217,000) 347 (21,173)
12CM32E 10 703 (421.4) 3526 (138.8) 4639 (182.6) 120.0 (265,000) 444 (27,092)
12CM32E 10 703 (421.4) 3526 (138.8) 4639 (182.6) 120.0 (265,000) 444 (27,092)
16CM32E 12 149 (478.3) 3526 (138.8) 4639 (182.6) 140.0 (309,000) 592 (36,123)
Please see spec sheet for more information: 16CM32E 12 149 (478.3) 3526 (138.8) 4639 (182.6) 140.0 (309,000) 592 (36,123)
C280-8.......................... LEHW0086, LEHW0092 Bore x Stroke – mm (in) 320 x 480 (12.6 x 18.9)
C280-12......................... LEHW0087, LEHW0093 4
C280-16......................... LEHW0088, LEHW0094, LEHW0182
For diesel engine rating definitions please see page 10. 6CM32C........ LEPW0042 8CM32C......... LEPW0043 9CM32C........ LEPW0044
CM34DF O F F S H O R E CM43 O F F S H O R E
Offshore Generator Set Ratings1 Offshore Generator Set Ratings1

Model Duty bkW ekW 2
kVA 2
Emissions Model Duty bkW ekW2 kVA2 Emissions
720 rpm – 60 Hz 500/514 rpm – 50/60 Hz
6CM34DF Prime 3060 – – IMO II/III 6CM43C Prime 6300 6111 7639 IMO II
750 rpm – 50 Hz 9CM43C Prime 9450 9167 11458 IMO II
6CM34DF Prime 3180 3085 3856 IMO II/III 12CM43C Prime 12600 12222 15278 IMO II
8CM34DF Prime 4240 4113 5141 IMO II/III 16CM43C Prime 16800 16296 20370 IMO II
9CM34DF Prime 4770 4627 5784 IMO II/III 1
1
Ratings Available in MDO, HFO, and crude oil fuel. ISO 3046-1 reference conditions. 2
2
Specifications3
Specifications 3
L – mm (in) W – mm (in) H – mm (in) Wt – tonnes (lbs) Disp – L (in3) 6CM43C 12 202 (480.4) 3400 (133.9) 6278 (247.2) 178.0 (393,000) 532 (32,463)
6CM34DF 9566 (376.6) 2600 (102.4) 4567 (179.8) 73.0 (161,000) 251 (15,291) 7CM43C 12 999 (511.8) 3400 (133.9) 6649 (261.8) 195.0 (430,000) 620 (37,382)
8CM34DF 10 626 (418.3) 2600 (102.4) 4770 (187.8) 92.0 (203,000) 334 (20,388) 8CM43C 13 729 (540.5) 3400 (133.9) 6649 (261.8) 210.0 (464,000) 709 (43,263)
9CM34DF 11 156 (439.2) 2600 (102.4) 4770 (187.8) 98.0 (217,000) 376 (22,936) 9CM43C 14 459 (569.3) 3400 (133.9) 6649 (261.8) 240.0 (530,000) 797 (48,633)
12CM43C 14 740 (580.3) 3890 (153.1) 6517 (256.6) 275.0 (607,000) 1063 (64,865)
Bore x Stroke – mm (in) 340 x 480 (13.4 x 18.9) 16CM43C 16 870 (664.2) 4027 (158.8) 6439 (253.5) 345.0 (761,000) 1417 (86,487)
3
Base-mounted generator sets. Final dimensions dependent on generator make/type. Bore x Stroke – mm (in) 430 x 610 (16.9 x 24.0)
3

12CM43C....................... LEPW0053
16CM43C....................... LEPW0054
CM46DF O F F S H O R E
Gas Compression Ratings
Offshore Generator Set Ratings1

500/514 rpm – 50/60 Hz
6CM46DF Prime 5790 5616 7020 IMO II/III
1
Ratings Available in LFO. HFO and crude oil ratings available separately.
2
Specifications3
6CM46DF 12 202 (480.4) 3400 (133.9) 6278 (247.2) 178.0 (393,000) 608 (37,116)
7CM46DF 12 999 (511.8) 3400 (133.9) 6649 (261.8) 195.0 (430,000) 710 (43,302)
8CM46DF 13 729 (540.5) 3400 (133.9) 6649 (261.8) 210.0 (464,000) 811 (49,488)
9CM46DF 14 459 (569.3) 3400 (133.9) 6649 (261.8) 240.0 (530,000) 912 (55,674)
12CM46DF 14 740 (580.3) 3890 (153.1) 6517 (256.6) 275.0 (607,000) 1217 (74,232)
16CM46DF 16 870 (664.2) 4027 (158.5) 6439 (253.5) 345.0 (761,000) 1622 (98,975) For pipeline, storage, gathering, and re-injection, Cat engines are
Bore x Stroke – mm (in) 460 x 610 (18.1 x 24.0) the prime choice for reliable gas compression. Caterpillar offers
3
Base-mounted generator sets. Final dimensions dependent on generator make/type. the widest range of prime mover choices, with power ratings from
71 bkW (95 bhp) to 6,100 bkW (8,180 bhp). Innovative electronic
Please see spec sheet for more information: controls give you superior performance with excellent fuel economy,
6CM45DF....................... LEHW0297 performance flexibility, and dependability for low owning and
7CM45DF....................... LEHW0298 operating costs.
8CM45DF....................... LEHW0299
9CM45DF....................... LEHW0300
12CM45DF...................... LEHW0301
16CM45DF...................... LEHW0302
Gas Compression G3300 G A S COMPRESSION
Gas Compression Engine Ratings

Range Engine Page Number
95-211 bhp G3300 83
215-637 bhp G3400 84
400-600 bhp CG137 85
524-1725 bhp G3500 86-87 Gas Ratings
1875-5350 bhp G3600 88-89 Model Rating Tier bkW bhp rpm Emissions Notes
6135-8180 bhp GCM34 90 G3304B NA Cont 71 95 1800 NSPS Site With Caterpillar or
Compliant Capable Customer-provided
AFRC & Aftertreatment*
0.5 & 1.0 g/bhp-hr NOx
G3304B NA Cont 71 95 1800 Export Only 2% O2 Emission Rating
G3306B NA Cont 108 145 1800 NSPS Site With Caterpillar or
0.5 & 1.0 g/bhp-hr NOx
G3306B NA Cont 108 145 1800 Export Only 2% O2 Emission Rating
G3306B TA1 Cont 151 203 1800 NSPS Site With Caterpillar or
Electric Drive Motors Ratings
bhp Engine Page Number 0.5 & 1.0 g/bhp-hr NOx
1500 CN1586 91 G3306B TA1 Cont 151 203 1800 Export Only 2% O2 Emission Rating
G3306B TAA1 Cont 157 211 1800 NSPS Site With Caterpillar or
2000 CN2086 91 Compliant Capable Customer-provided
2500 CN2586 91 AFRC & Aftertreatment*
3000 CN3086 91 0.5 & 1.0 g/bhp-hr NOx
3500 CN3586 91 Dependent upon engine configuration selected.
*
3621 CN2785 91 54°C/130°F Water to Aftercooler

1
Ratings listed are for 25°C (77°F) ambient temperature, 500’ altitude, and pipeline quality gas.
4000 CN4086 91
5000 CN5086 91
5500 CN5586 91 Specifications
G3304 1158 (46) 744 (29) 1170 (46) 757 (1670) 7 (425)
G3306 1539 (60) 978 (38) 1261 (50) 948 (2090) 10.5 (640)

G3304B ..................................... LEHW0017 G3306B TA..............................LEHW8815
G3306B NA............................... LEHW0111
For gas engine rating conditions please see page 10.
G3400 G A S COMPRESSION
CG137 G A S COMPRESSION
Gas Ratings
Gas Ratings
Model Rating Tier bkW bhp rpm Emissions Notes
G3406 NA Cont 160 215 1800 NSPS Site With Customer-supplied
CG137-8 Cont 298 400 1800 NSPS Site With Caterpillar-supplied
Compliant Capable AFRC & Aftertreatment
Compliant Capable AFRC & Customer-provided
0.5% O2 or 2% O2
Aftertreatment,
Set Points 0.5% O2 Set Point
G3406 TA1 Cont 206 276 1800 NSPS Site With Customer-supplied
CG137-12 Cont 447 600 1800 NSPS Site With Caterpillar-supplied
Compliant Capable AFRC, Caterpillar or
0.5% O2 Set Point
Customer supplied
G3406 TA1 Cont 242 325 1800 Export Only 2% O2 Emission Rating Aftertreatment, 0.5% O2 Set
G3408 NA Cont 190 255 1800 NSPS Site With Customer-supplied Point
0.5% O2 or 2% O2 Specifications
Set Points
G3408 TA1 Cont 298 400 1800 Export Only 2% O2 Emission Rating
G3408C LE Cont
1
317 425 1800 NSPS Site With Customer-supplied CG137-8 1627 (64.0) 1443 (56.8) 1758 (69.2) 2200 (4850) 18 (1099)
Compliant Capable2 Aftertreatment CG137-12 2092 (82.4) 1423 (56) 1778 (70) 2835 (6250) 27 (1649)
G3412 TA1 Cont 448 600 1800 Export Only 2% O2 Set Point Bore x Stroke – mm (in) 137 x 152 (5.4 x 6)
G3412C LE1 Cont 475 637 1800 NSPS Site With Customer-supplied
Compliant Capable2 Aftertreatment
1
54°C/130°F Water to Aftercooler
2
NSPS Site Compliant Capable with Customer-supplied SCR Aftertreatment
Specifications
G3406 TA 1934 (76) 1270 (50) 1433 (56) 1362 (3000) 14.6 (893)
G3408 TA 1738 (68) 1312 (52) 1542 (61) 2041 (4500) 18 (1099)
G3408C LE 1756 (69.1) 1563 (61.5) 1758 (69.2) 2041 (4500) 18 (1099)
G3412 TA 2087 (82) 1224 (48) 1542 (61) 2320 (5115) 27 (1649)
G3412C LE 2442 (96) 1598 (63) 1960 (77) 2800 (6173) 27 (1649)
Please see spec sheet for more information: Ratings listed are for 25°C (77°F) ambient
Please see spec sheet for more information: temperature, 500’ altitude, and pipeline quality gas.
CG137-8..............................................LEHW0340
G3406................ LEHW0029 G3408C LE.............LEHW0031 G3412C LE.............. LEHW0033 CG137-12 Integrated Catalyst........LEHW0119
G3408................ LEHW0030 G3412.....................LEHW0032 CG137-12............................................LEHW0270
For gas engine rating conditions please see page 10. For gas engine rating conditions please see page 10.
Gas Ratings
Rating
Model bkW bhp rpm Emissions Notes
Tier
Gas Ratings NSPS Site With Customer-supplied
Rating G3516J LE1 Cont 1119 1500 1400 Compliant Aftertreatment,
Model bkW bhp rpm Emissions Notes Capable 0.5 g/bhp-hr NOx
Tier
NSPS Site With Customer-supplied NSPS Site With Customer-supplied
G3508 TA1 Cont 391 524 1200 Compliant AFRC & Aftertreatment, *G3520J LE1 Cont 1104 1480 1200 Compliant Aftertreatment,
Capable 0.5% 02 Set Point Capable2 0.5 g/bhp-hr NOx
NSPS Site With Customer-supplied NSPS Site With Customer-supplied
G3508 LE1 Cont 500 670 1400 Compliant Aftertreatment, *G3520J LE1 Cont 1286 1725 1400 Compliant Aftertreatment,
Capable2 2 g/bhp-hr NOx Capable 0.5 g/bhp-hr NOx
NSPS Site With Customer-supplied
G3508J LE1 Cont 514 690 1400 Compliant Aftertreatment,
Capable 0.5 g/bhp-hr NOx
1
2
G3512 TA1 Cont 589 790 1200 Compliant AFRC & Aftertreatment, *Additional ratings available via DTO.
Capable 0.5% 02 Set Point
NSPS Site With Customer-supplied Specifications
G3512 LE1 Cont 642 860 1200 Compliant Aftertreatment,
Capable 2 g/bhp-hr NOx L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in3)
NSPS Site With Customer-supplied G3508 LE 2440 (96) 1768 (70) 1907 (76) 5420 (11,950) 34.5 (2105)
G3512 LE1 Cont 749 1004 1400 Compliant Aftertreatment, G3508J LE 2546 (100.2) 2029 (79.9) 2140 (84.3) 6048 (13,306) 34.5 (2105)
Capable 2 g/bhp-hr NOx
G3512 LE 2786 (109) 1790 (71) 1863 (73) 6676 (14,720) 51.8 (3158)
NSPS Site With Customer-supplied G3512J LE 3037 (120) 2201 (86.7) 2135 (84.1) 7081 (15,611) 51.8 (3158)
G3512J LE1 Cont 772 1035 1400 Compliant Aftertreatment, G3516 TA 3654 (143.8) 1973 (77.7) 2281 (89.8) 9232 (20,352) 69 (4211)
Capable 0.5 g/bhp-hr NOx
G3516 LE 3339 (131) 1820 (72) 1863 (73) 8015 (17,670) 69 (4211)
With Caterpillar supplied G3516J LE 3586 (141) 1883 (74) 2285 (90) 9155 (20,183) 69 (4211)
Export AFRC & Customer-supplied
G3516 NA Cont 492 660 1200 Aftertreatment, G3520J LE 4113 (162) 1883 (74) 2361 (93) 10785 (23,776) 86 (5263)
Only
0.5% 02 Set Point
With Caterpillar supplied AFRC
NSPS Site & Customer-supplied
G3516 TA1 Cont 1029 1380 1400 Compliant Aftertreatment,
Capable
0.4% 02 Set Point

Capable 2 g/bhp-hr NOx
Capable 2 g/bhp-hr NOx Please see spec sheet for more information:
G3508 LE................................... LEHW0034 G3516 LE..................................LEHW0036
G3516J LE1 Cont 1029 1380 1400 Compliant Aftertreatment, G3508J LE................................. LEHW0341 G3516J LE...............................LEHW0318
Capable 0.5 g/bhp-hr NOx G3512 LE................................... LEHW0035 G3520J LE...............................LEHW0320
G3512J LE................................. LEHW0370
G3516 TA.................................. LEHW0329
1
2
(Continued)
Specifications
Gas Ratings L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in3)
Rating G3606 A4 4833.4 (190.3) 2225.2 (87.6) 2923.2 (115.1) 16 639 (36,683) 127.2 (7762)
Model bkW bhp rpm Emissions Notes
Tier G3608 A4 5656 (222.68) 2260 (89) 2922 (115) 21 092 (46,500) 169.6 (10,350)
NSPS Site With Customer-supplied G3612 A4 5431.9 (210.31) 2731.7 (107.56) 3279 (129) 26 535 (58,500) 254 (15,528)
G3606 A41 Cont 1398 1875 1000 Compliant Aftertreatment, G3616 A4 5652 (222.5) 2634 (104) 3278 (129) 32 659 (72,000) 339 (20,705)
Capable 0.3 and 0.5 g/bhp-hr NOx
NSPS Site With Customer-supplied Bore x Stroke – mm (in) 300 x 300 (11.8 x 11.8)
G3606 A42 Cont 1454 1950 1000 Compliant Aftertreatment,
Capable 0.3 and 0.5 g/bhp-hr NOx Please see spec sheet for more information:
1
54°C Aftercooler Water & 88°C Jacket Water 3
32°C Aftercooler Water & 88°C Jacket Water G3606 A4 0.3g NOx................. LEHW0258 G3612 A4 0.3g NOx................LEHW0260
2
43°C Aftercooler Water & 88°C Jacket Water G3606 A4 0.5g NOx................. LEHW0234 G3612 A4 0.5g NOx................LEHW0236
Ratings continued on page 89 G3608 A4 0.3g NOx................. LEHW0259 G3616 A4 0.3g NOx................LEHW0261
G3608 A4 0.5g NOx................. LEHW0235 G3616 A4 0.5g NOx................LEHW0198

GCM34 G A S COMPRESSION
Electric Drive Motors G A S COMPRESSION
Caterpillar offers electric motor configurations, from 1,000 hp to 10,000 hp (750

Gas Ratings kW – 7,500 kW), to meet your gas compression needs. To simplify the ordering
process, Caterpillar offers a range of commonly ordered standard offerings. Other
configurations are available via a Design to Order (DTO) request. Contact the
G12CM34 Cont 4575 6135 750 NSPS Site 0.5 & 0.7 g/bhp-hr
Compliant Capable NOx Application Support Center for additional information.
G16CM34 Cont 6100 8180 750 NSPS Site 0.5 & 0.7 g/bhp-hr
Compliant Capable NOx
All NEMA standard configuration electric motors come with WPII (IP24W)
enclosure, IC01 Cooling, Service Factor (Inverter Fed) - 1.15 SF (1.0 VFD), Class
B Temperature Rise, Class F Insulation, and Hazardous Location - Class 1-Div.
Specifications 2-Groups A,B,C, and (T3) certification. All IEC standard configuration motors come
with IP55 enclosure, IC611 Cooling, EX px II T3 Ex Protection, Class B Temperature
Rise, Class F Insulation, and Hazardous Location – Zone 1 certification.
G12CM34 7055 (278) 2992 (118) 3875 (153) 64 400 (142,000) 457 (27,907)
G16CM34 8405 (331) 2992 (118) 3875 (153) 82 000 (181,000) 610 (37,209) Hazardous Location Electric Drive Motor Ratings
Model Frame Size bkW bhp Number of Poles Voltages
1200 rpm/60 Hz (NEMA Standard)

CN1586 450 1118 1500 6 4000V / 4160V
900 rpm/60 Hz (NEMA Standard)
CN2086 500 1491 2000 8 4000V / 4160V
CN2586 500 1864 2500 8 4000V / 4160V
CN3086 560 2237 3000 8 4000V / 4160V
CN3586 560 2610 3500 8 4000V / 4160V
CN4086 560 2982 4000 8 4000V / 4160V
CN5086 560 3728 5000 8 4000V / 4160V
CN5586 560 4100 5500 8 4000V / 4160V
750 rpm/50 Hz (IEC Standard)
CN2785 630 2700 3621 8 10kV
G12CM34.................................. LEHW8997
G16CM34.................................. LEHW0001
For gas engine rating conditions please see page 10. * Class B rise at nameplate rated load
Electric Drive Motors G A S COMPRESSION
(Continued) Formulas
Ratings continued from page 91 Unit Conversions
Torque Energy
Specifications 1 N•m = 0.737562 ft/lb 1 kJ = 0.948452 BTU
L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Power Pressure
1 kW = 1.341022 hp 1 kPa = 0.145038 psi
CN1566 2110 (83.07) 2005 (78.94) 1860 (73.23) 3760 (8,289)
CN2086 2864 (112.8) 2345 (92.3) 2060 (81.1) 6931 (15,280) Volume Temperature
CN2586 2864 (112.8) 2345 (92.3) 2060 (81.1) 6931 (13,306) 1 L = 61.023744 in3 (°C x 1.8) + 32 = °F
CN3086 3470 (136.61) 2570 (101.18) 2461 (96.87) 7770 (17,130)
CN3586
CN4086
3770 (132.68)
3770 (132.68)
2580 (101.57)
2580 (101.57)
2465 (97.05)
2465 (97.05)
Electric Drive Motors
8320 (18,342)
8750 (19,290)
1 mm = 0.03937 in
Length (°F - 32)
= °C
CN5086 3770 (132.68) 2580 (101.57) 2465 (97.05) 9720 (21,429) 1.8
CN5586 3545 (139.57) 2575 (101.38) 2565 (97.05) 11167 (24,620) Mass
Plunger Load
CN2785 3927 (154.60) 2306 (90.78) 2326 (91.57) 13210 (29,123) 1 kg = 2.204623 lb
PD x PD x .7854 x PSI
PD = Plunger diameter
PSI = Fluid end pressure in PSI
Fuel Consumption
g L
Other configurations available from 1,000 hp to 10,000 hp (750 kW – 7,500 kW) via a DTO request
bkW-hr hr
* Class B rise at nameplate rated load
(
g
x

) ( Power (bkW)
bkW-hr 1000 x fuel density (kg/L)
=
L
)
hr
Torque
30,000 Power (bkW)
x = Torque (N•m)
p Speed (rpm)
Displacement
p x [bore (mm)]2 x stroke (mm) x # cylinders = Displacement (L)
4 x 106
BMEP
4 p x Torque (N•m)
Please see spec sheet for more information: = BMEP (kPa)
CN1566...................................... LEHW0245, LEHW0256 Displacement (L)
CN2086...................................... LEPW0117, LEPW0116
CN2586...................................... LEPW0114, LEPW0115 Generator Set Ratings
CN3086...................................... LEHW0267, LEHW0268 Real Power (ekW) = Brake Power (bkW) x Generator Efficiency
CN3586...................................... LEHW0265, LEHW0266
CN4086...................................... LEHW0263, LEHW0264 Real Power (ekW)
CN5086...................................... LEHW0248, LEHW0255 Power Factor =
CN5586...................................... LEHE2030, LEHE2031 Apparent Power (kVA)
CN2785...................................... LEPW0124
1.73 x Voltage x Current
Apparent Power (kVA) =
For gas engine rating conditions please see page 10. 1000
R A T I N G S G U I D E 92 R A T I N G S G U I D E 93
For more information
please visit:
www.cat.com/oilandgas
E-mail: cat_power@cat.com
Caterpillar.
Your Local Resource. Worldwide.
AMERICAS RUSSIA
Caterpillar Inc. Caterpillar Eurasia
Oil & Gas 82 Sadovnicheskaya Str.
10203 Sam Houston Park Drive Moscow 115035
Houston, Texas 77064 Tel: (+7-495) 213-3340
Tel: (+1) 713-329-2207 Fax: (+7-495) 213-3372
Fax: (+1) 713-895-4280
EUROPE, AFRICA, AND MIDDLE EAST
ASIA-PACIFIC Caterpillar Commercial Northern
Caterpillar Asia Pte., Ltd. Europe Ltd.
Oil & Gas Oil & Gas
7 Tractor Road Building 329
Singapore 627968 Doncastle Road
Tel: (+65) 6828-7333 Bracknell RG12 8PE
Fax: (+65) 6828-7414 United Kingdom
Tel: 01344 782920
CHINA Fax: 01344 782930
Caterpillar Global Petroleum China
Room 1601 Caterpillar Tower Caterpillar Motoren GmbH & Co. KG
No. 8 Wangjing Street Oil & Gas
Beijing 100102, P.R. China Falckensteiner Str. 2
Tel: (+86-10) 5921-0521 D-24159 Kiel, Germany
Fax: (+86-10) 5921-0022 Tel: (+49) 431 3995 2020
Fax: (+49) 431 3995 4020
Materials and specifications are subject to change without notice. Rating ranges listed
include the lowest and highest available for a specific engine or family of engines. Load
factor and time at rated load and speed will determine the best engine/rating match.
©2021 Caterpillar. All Rights Reserved. CAT, CATERPILLAR,

LET’S DO THE WORK, their respective logos, "Caterpillar
Corporate Yellow", the "Power Edge" and Cat “Modern Hex”
trade dress as well as corporate and product identity used
herein, are trademarks of Caterpillar and may not be used
without permission.
LECW2462-28 (3-20)

Oil & Gas Ratings Guide: Edition 2021 (March)

Uploaded by

Copyright:

Available Formats

Oil & Gas Ratings Guide: Edition 2021 (March)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Oil & Gas Ratings Guide: Edition 2021 (March)

Uploaded by

Copyright:

Available Formats

OIL & GAS

To find spec sheets referenced in this guide go to:

Well Service Engine Ratings

For diesel engine rating definitions please see page 10.

Well Service Ratings Well Service Ratings

Well Service Ratings

Please see spec sheet for more information:

Well Service Ratings Well Service Ratings

Well Service Ratings Well Service Ratings

Well Service Ratings

Well Service Ratings Well Service Ratings

Dynamic Gas Blending – Well Service Ratings

Diesel Only - Well Service Ratings Well Service Ratings

China Stage III – Well Service Ratings

Well Service Ratings

L – mm (in) W – mm (in) H – mm (in) Wt – kg (lbs) Disp – L (in3) Specifications

Please see spec sheet for more information:

CX38-P892 IPD Version CX38-P892 Standard Version

Ratings Transmission Speed Ratios

**Viewed from rear

Ratings continued from page 33

CX38-P892 PTO's Maximum Rated Torque Maximum Rated Power

**Viewed from rear

Ratings Transmission Speed Ratios Ratings Transmission Speed Ratios

**Viewed from rear **Viewed from rear

Ratings Transmission Speed Ratios Ratings Transmission Speed Ratios

*Viewed from rear *Viewed from rear

Please see spec sheet for more information:

Land Drilling Ratings

Extreme Duty and Stainless Steel fluid ends available

Displacement Displacement at Pump rpm

Please see spec sheet for more information:

Land Mechanical Drilling Engine Ratings

Land Drilling Module Ratings

Please see spec sheet for more information:

Ratings continued from page 45

Land Electric Drilling Module Ratings

Please see spec sheet for more information:

Land Mechanical Drilling Engine Ratings

Land Electric Drilling Module Ratings

Land Mechanical Drilling Engine Ratings

Please see spec sheet for more information:

L – m (ft) W – m (ft) H – m (ft) Weight - kg (lbs)

Please see spec sheet for more information:

C15 CX31-P600 600 33

50 Hz Oilfield Diesel Generator Set Ratings –

Ratings continued on page 57

Ratings continued from page 58

* Package available through DTO

Ratings continued on page 59 Ratings continued on page 60

Ratings continued from page 59 Ratings continued from page 60

900 rpm 720/750 rpm

50 Hz Oilfield Generator Set Ratings – 110-1560 ekW

EPA NRM emission compliant

Offshore Hazardous Location Generator Set Ratings

Offshore Generator Set Ratings

Offshore Generator Set Rating Offshore Generator Set Ratings1

Please see spec sheet for more information:

Offshore Generator Set Ratings1 Offshore Generator Set Ratings

**Viewed from rear

Viewed from rear Viewed from rear

Viewed from rear Viewed from rear