SW Estimating Manual

ESTIMATING MANUAL
SOUTHWEST FIREPROOFING PRODUCTS
ESTIMATING MANUAL AND PRODUCT SELECTOR FOR

TYPES 5GP™, 5MD™, 5AR™, 7GP™, 7HD™, 7TB™ and DK3™
DOCUMENT No.: 100919-SW-A

DATE: October, 2019
DOCUMENT CONTENTS
SECTION 1: Southwest Fireproofing Product Selector

SECTION 2: Introduction, Guidelines & Scheduling
SECTION 3: Estimating Columns
SECTION 4: Estimating Beams, Deck and Joists
SECTION 5: Type DK3 Adhesive/Spattercoat
SECTION 6: Estimate Build-Up
APPENDIX A: Simplified Design Flow Chart

APPENDIX B: Conversion Tables
APPENDIX C: Deck Profile and Flute Charts
APPENDIX D: Worksheet Templates
APPENDIX E: Thickness Adjustment Tables
Effective October, 2019

ESTIMATING MANUAL
SECTION 1: Southwest Fireproofing Product Selector
Product Type 5GP Type 5MD Type 5AR Type 7GP Type 7TB Type 7HD
Gypsum Gypsum Gypsum Portland Portland Portland

Product Type
Plaster Plaster Plaster Cement Cement Cement
Density (Class) lb/ft3 (pcf) 15 15-22 15 22 22 35-40
>430 (15 pcf)

Bond Strength (psf)* >200 >1,000 (16.5 pcf) >200 >2,000 >1,200 17,000
>3,000 (22 pcf)
1-4 Hour Protection
Cellulosic Fire Rated
ASTM E119
X X X X X
UL 263
NFPA 251
CAN/ULC S101
Thermal Barrier Rated
X
UL Enclosed Corner Test
Extended Set Material X
Can be injected with

X X X
Accelerator A-20
Suitable For High Humidity
X X X
Applications
Meets Minimum Bond
Strength Requirement for
X X X X X X
High Rise Buildings up to 75
ft. (150 psf)
Meets Minimum Bond
X X X X
High Rise Buildings 75 to
420 ft. (430 psf)
Meets Minimum Bond
X X X X
High Rise Buildings >420 ft.
(1,000 psf)
44 (15 pcf)
Target Yield (Bd. Ft./Bag) 44 42 (16.5 pcf) 44 30 30 16
30 (22 pcf)
* Bond Strength tests conducted under ASTM E-736 standard procedure and/or in accordance with Appendix B of AWCI Technical
Manual 12-A.
Note: Contact local Carboline sales representative for third party test reports if needed.

Page 2
ESTIMATING MANUAL
SECTION 2: Introduction, Guidelines & Scheduling
INTRODUCTION
Carboline is providing this estimating guide to assist you, our valued customer, in making a competitive bid, with a user
friendly source of information. This guide is essentially for all products, with emphasis on Types 5 materials. See current
price lists and other published data on product yields, as they may change, to be current in product use and quantities.
The information in this guide, are provided in good faith, and of general nature only. Conditions on each individual project
change. Be careful in your estimates, in your planning and preparations. Carboline cannot assume responsibility for its
use. The responsibility must rest with the user of this guide.
GUIDELINES
Be sure you have these tools and information:
1. Project specifications and all addendum

2. Complete set of plans, including structural and architectural. It may be prudent to have mechanical and electrical
as well, but not always necessary.
3. The most recent ULI or ULC Fire Resistance Directory
4. Local codes and national codes applicable
Remember, when selecting a UL design(s) to base your bid on, be sure it meets all specifications and codes. Call
Carboline should you need guidance in the selection process.
Estimators may find discrepancies in requirements between the project's plans and specifications. When this occurs,
contact the project Architect or General Contractor before finalizing your bid. Sometimes specifications require the use of
certain designs, but may not match the construction plans.
COORDINATION AND PROJECT SUPERVISION
Project scheduling, coordination and supervision must always be considered in your estimate. Make sure your estimate is
based on a clear understanding of sequencing to efficiently maximize your field crew's time. Attempt to finish all work on a
floor before proceeding to the next. Reduce or eliminate as much as possible, any equipment and personnel movements,
as they are costly, waste time, and will factor into a competitive bid.

Page 3
ESTIMATING MANUAL
SECTION 3: Estimating Columns
ESTIMATING WIDE FLANGE COLUMNS
1. Separate the columns on a floor by floor basis from the largest to the smallest.
2. Determine the hourly rating required and the corresponding fireproofing thickness. If this is not printed on the
plans or specifications, the thicknesses may be determined by using appropriate UL column designs. Call
Carboline, if you need assistance.
3. Then use the column worksheet, Appendix D, to sum up your columns.
4. Write down column size, number of columns, and lineal feet of column. Then, multiply the no. of columns by the
lineal feet, to arrive at total lineal feet for that column.
5. To convert the lineal footage (of each column and thickness of Southwest products required, to provide the fire
rating,) to board footage of fireproofing, use the column conversion factor from Appendix B.
6. To calculate board footage, multiply the proper conversion factor from Appendix B by the total lineal footage of the
individual column.
7. Repeat this procedure for each column size and material thickness. Add the resulting board footage amounts to
determine a total board footage of product for columns per floor.
8. Repeat this procedure on subsequent floors and add these total individual floor board footage results, to arrive at
a total for the project.
Sample procedure (on column worksheet)
1. # column x I'm. ft. per column = Total lin. ft. of columns

2. Total lin. ft. x column conversion factor Table A = BD. Ft.
3. Repeat for each size column on the floor
4. Sum up individual totals for floor Board footage results and record.
ESTIMATING PIPE AND TUBE COLUMNS
1. Separate columns on a specific floor by size, from largest too smallest.

2. Determine required material thickness for each column size. The proper material thickness is based on the
column size (A/P value) and hourly rating requirement.
3. Determine the total lineal footage for each column size.
4. Use the following formula to determine board footage for product for each column size and respective material
thickness. Also see the end of this guide for calculations completed for UL Design: X771.
Pipe Columns:
(d + 2 th) 2 x th x lineal footage = bd. ft.

15.28
Tube Columns:
((2L + 2H) x th) + (4 x th 2) x Total lin. footage = bd. ft.

12
L = length in inches d = outside dia. of pipe in inches

H = height in inches
Th = thickness of Southwest products
5. These calculations yield board ft. of product per lineal foot of column. Add the result of each specific column size
and thickness per floor. Repeat the procedure for each floor.
Note: As with steel bar joists and trusses, the above formulas are a general solution to the estimating of these steel columns. Experience and specific
job conditions will have more effect on total material usage, than the actual are of the pipe or tube column. Remember to consider over-spray on small
steel members.

Page 4
ESTIMATING MANUAL
SECTION 4: Estimating Beams, Decks and Joists
ESTIMATING BEAMS
1. Separate beams on each floor form the largest to the smallest and list them on the beam work sheet, Appendix D.
2. Determine fireproofing thickness, if not given on plans or specs, from the appropriate Southwest UL design.
Note: Be sure to determine if beams are restrained or unrestrained, as ULI requires at times different thicknesses.
3. Determine the total footage of each beam size for each respective material thickness.
4. Convert the lineal footage of each beam and thickness required to provide the fire rating, to board footage of
product, by using the beam conversion factors from Appendix B.
5. Repeat these steps for each size beam. If you he more than one floor that are identical, you can multiply your bd.
ft. by that no. of floors, otherwise a complete take off will have to be done per floor.
Note: Beams that have a W/D smaller than the minimum beam size listed in a UL design, will have to be adjusted accordingly. See the current UL
directory for W/D calculations.
ESTIMATING DECKS
Determine type of deck, depth of decks, concrete type (reg. or light wt.) type of profile or the steel floor unit, i.e.: cellular,
fluted, or blended. All these factors determine the UL design to be used, and fire proofing thicknesses to bid. Be sure if
shear connectors are included in the design, as well as in the construction. Finally note if the requirements are for
composite or non-composite decks.
Determine the total thickness of the concrete slab: amount above the flutes... and the concrete type. Check for any
electrification units. Determine the width and number of trench headers and bottom less trench headers and electrical
inserts. These are covered in certain designs, and may require greater thicknesses.
1. After you have collected the above information, and selected a UL design, commence with the estimate.
2. Calculate the total area of each section of deck, that requires as specific thickness.
CELLULAR DECKING
To determine the sq. ft. for a cellular deck, multiply the length of the deck by the width of the deck, or the entire floor area,
if applicable.
FLUTED DECKING
For a fluted deck, the depth and profile of the deck will determine the total surface area to be sprayed. Multiply length x
width, of each fluted deck. Then, multiply this area by correct expansion factor shown in Appendix C, for that type of deck.
3. Once the total area to be sprayed for either type of deck, is known, multiply by the thickness required, to obtain
bd. ft.
Note: Often more than one thickness is specified by UL for fluted decks. Check UL designs carefully.
4. Repeat this procedure or each floor, and record data per floor.
SAMPLE PROCEDURE
Cellular Decks: (flat)
1. Multiply length x width = sq. ft. of flat area

2. Sq. ft. x material thickness = Total bd. ft. deck area

Page 5
ESTIMATING MANUAL
Fluted Decks:
1. Multiply length x width = sq. ft. fluted decks

2. Sq. ft. x factor (from deck profile) = Total expanded surface area to spray.
3. Surface area x material thickness = Total bd. ft. of surface area
ESTIMATING STEEL BAR, JOISTS AND TRUSSES
Steel bars and joist have many configurations, hence estimating fireproofing on these elements is difficult. However, as so
many new buildings are low profile, with joist as a cheaper alternative to structural steel construction, a good estimating
technique is very important.
Be careful in estimating, and if prior experience is available, be sure to use it. One way to reduce the amount of product to
be used, is to use fiber glass scrim on joists, to substantially reduce overspray. The following procedure is a
recommendation. Use your experience as a guide.
1. Separate joists by size (depth) and required fireproofing thickness.

2. Determine material usage necessary by considering the joist to be a beam.
3. Calculate the area to be covered as follows:
(d x2 +w) x ft. x th = bd. ft.

12
Where: d = depth in inches

w = width in inches
th = thickness of product
MATERIAL TOTALS
1. First of all, determine the material totals required for each of the Southwest products to be used on each different
substrate, be it beams, columns, decks or roof configurations.
2. Add your total bd. ft. requirements for each substrate for each floor.
3. Add the totals for each floor to arrive at the amount of product subtotal for the project.
WASTE
It is necessary to compensate for waste during application. Experienced contractors use a 4-6 % factor, assuming the job
is "straight foreword", but it is very dependent on the sprayer, job conditions and supervision.
Waste on bar joists or angle trusses can be controlled, by careful work, and experience. Generally, fiberglass scrim can
reduce the waste from 25% to less than 10%. Let your experience be your guide.
To adjust your material, estimate for waste, multiply the total bd.ft. of product required by the appropriate waste %.
Example: Assuming a 10% waste factor on a project that has been estimated to require 100,000 bd. ft. of Southwest
product.
100,000 bd. ft. x 1.10 = 110,000 bd. ft. (Note, a 10% waste factor is high, and should be in the range of 4 - 6 % for well
managed projects; let your experience be your guide; waste on joists of course will be higher than on beams, decks and
column work)
CONVERSION OF BRD. FT. TO TOTAL BAGS
To convert total bd. ft. of product to bags (including waste at 10%) divide bd. ft. coverage per bag given in current price
sheets and yield factors:

Page 6
ESTIMATING MANUAL
Example:
If you estimated 110,000 bd. ft. of Type 5 (GP) is required and you anticipate applying it at 17 PCF (lbs/ft. 3), your
calculation would be:
110.000 bd. ft. =. 2,895 bags of Type 5

38
Note: you have already included a waste factor; hence this represents the total bags required.
INTENTIONALLY LEFT BLANK

Page 7
ESTIMATING MANUAL
SECTION 5: Type DK3 Adhesive/Spattercoat

TYPE DK3 ADHESIVE/SPATTERCOAT
When Type DK adhesive is required, particularly with all flexible roof deck systems, add this material to your estimate.
1. Determine the total area in sq. ft. requiring Type DK adhesive.

2. Divide this area by the coverage of Type DK to arrive at the no. of bags.
INTENTIONALLY LEFT BLANK

Page 8
ESTIMATING MANUAL
SECTION 6: Estimate Build-Up
TOTAL MATERIAL COSTS
To determine the total material costs, multiply your unit cost for, products and add appropriate sales taxes and freight. Be
sure to add costs of drop trailers, if used, including the cost of returning empty trailers.
LABOR AND INCIDENTAL COSTS
These costs will represent a significant percentage of the overall estimate, and project bid price.
Cost in these areas are directly related to your crew's application skills and operational capability. Field proficiency is very
important. Hence, SOUTHWEST cannot suggest specific costs related to labor, staging costs and other costs associated
with field production.
FINAL PROJECT ESTIMATE
1. The complete project estimate and subsequent bid price will be composed of the preceding items.
2. Project specifications should be carefully understood, and re-examined, so that all costs are covered.
3. Pay particular care when estimating UL designs to accomplish what local codes require, or is specified,
preventing potential job site disputes later into a project.
We anticipate this guide is helpful in estimating SOUTHWEST FIREPROOFING PRODUCTS. Call us if you need
guidance.

Page 9
ESTIMATING MANUAL
APPENDIX A
SIMPLIFIED DESIGN FLOWCHARTS

Floor c/w Concrete
Southwest® SFRM Series
and Steel Deck UL Design Flow Chart – Concrete/Steel Deck
1-1/2”, 2”or 3”Fluted

or Cellular Steel
Deck
Protected Deck
2” NW/LW Concrete Min. 2-1/2” NW/LW

Topping Concrete Topping
Unprotected Deck
Min. 3-1/2” NW
UL D743* UL D788*
UL D949*
Quick Links ULC F817 Substitutions

ULC F906
Southwest Type 5-GP S739
Southwest Type 5-MD N791
Southwest Type 7-GP

General Notes
Southwest Type 7-HD * Also certified for use in Canada (CAN/ULC-S101)
August 2019
Concrete Slab
UL Design Flow Chart – Concrete Floor Assemblies
Cast-in Place
Unprotected & Unprotected &

Protected Slab (LW) Protected Slab (NW)
Precast Structural
Precast Hollowcore
Tees
UL J709* UL J718*
Quick Links UL J957* UL J701* Substitutions
Southwest Type 5-MD N791
Southwest Type 7-GP

General Notes
August 2019
Roof/Ceiling
UL Design Flow Chart – Roof/Ceiling Assemblies
Metal Deck c/w Metal Deck w/c

Insulation Insulating Concrete
Protected
Roof/Ceiling Deck
Unprotected
1 / 2 HR. Roof/Ceiling Deck
Polyisocyanurate Board c/w or Polystyrene Foamed Plastic Polyurethane Foam Insulation

Mineral/Fiber
without Gypsum Wallboard over Gypsum wallboard (sprayed)
UL P741* UL P717* UL P741* UL P701* UL P937*
Quick Links Substitutions
Southwest Type 5-MD
Southwest Type 7-GP

General Notes
August 2019
Structural Column
UL Design Flow Chart – Structural Columns
Wide Flange Hollows
UL X772* UL Y725*
UL X771* ULC Z806** (SHS/RHS)
ULC Z805** ULC Z807** (CHS)
Quick Links
Southwest Type 5-GP
Southwest Type 5-MD
Southwest Type 7-GP General Notes

* Also certified for use in Canada (CAN/ULC-S101)
Southwest Type 7-HD ** Type 5 only (Canada)
August 2019
ESTIMATING MANUAL
APPENDIX B
CONVERSION TABLES

ESTIMATION MANUAL APPENDIX B
COLUMN BOARD FOOT CONVERSION FACTORS BD.FT PER L.FT / APPLIED PROTECTION THICKNESS
Member Designation W/D Heated Perimeter (") Heated Perimeter (') 3/8 4/9 1/2 4/7 5/8 2/3 3/4 4/5 7/8 1 1 1/4 1 1/2 1 3/4 2
W 44 x 335 2.25 149 12.42 4.66 5.43 6.21 6.98 7.76 8.54 9.31 10.09 10.86 12.42 15.52 18.63 21.73 24.83
x 290 1.97 147 12.25 4.59 5.36 6.13 6.89 7.66 8.42 9.19 9.95 10.72 12.25 15.31 18.38 21.44 24.50
x 262 1.78 147 12.25 4.59 5.36 6.13 6.89 7.66 8.42 9.19 9.95 10.72 12.25 15.31 18.38 21.44 24.50
x 230 1.58 146 12.17 4.56 5.32 6.08 6.84 7.60 8.36 9.13 9.89 10.65 12.17 15.21 18.25 21.29 24.33
W 40 x 593 4.03 147 12.25 4.59 5.36 6.13 6.89 7.66 8.42 9.19 9.95 10.72 12.25 15.31 18.38 21.44 24.50
x 503 3.49 144 12.00 4.50 5.25 6.00 6.75 7.50 8.25 9.00 9.75 10.50 12.00 15.00 18.00 21.00 24.00
x 466 3.53 132 11.00 4.13 4.81 5.50 6.19 6.88 7.56 8.25 8.94 9.63 11.00 13.75 16.50 19.25 22.00
x 431 3.01 143 11.92 4.47 5.21 5.96 6.70 7.45 8.19 8.94 9.68 10.43 11.92 14.90 17.88 20.85 23.83
x 397 2.8 142 11.83 4.44 5.18 5.92 6.66 7.40 8.14 8.88 9.61 10.35 11.83 14.79 17.75 20.71 23.67
x 392 3.02 128 10.67 4.00 4.67 5.33 6.00 6.67 7.33 8.00 8.67 9.33 10.67 13.33 16.00 18.67 21.33
x 372 2.64 141 11.75 4.41 5.14 5.88 6.61 7.34 8.08 8.81 9.55 10.28 11.75 14.69 17.63 20.56 23.50
x 362 2.57 141 11.75 4.41 5.14 5.88 6.61 7.34 8.08 8.81 9.55 10.28 11.75 14.69 17.63 20.56 23.50
x 331 2.59 126 10.50 3.94 4.59 5.25 5.91 6.56 7.22 7.88 8.53 9.19 10.50 13.13 15.75 18.38 21.00
x 327 2.56 125 10.42 3.91 4.56 5.21 5.86 6.51 7.16 7.81 8.46 9.11 10.42 13.02 15.63 18.23 20.83
x 324 2.31 140 11.67 4.38 5.10 5.83 6.56 7.29 8.02 8.75 9.48 10.21 11.67 14.58 17.50 20.42 23.33
x 321 2.26 141 11.75 4.41 5.14 5.88 6.61 7.34 8.08 8.81 9.55 10.28 11.75 14.69 17.63 20.56 23.50
x 297 2.14 139 11.58 4.34 5.07 5.79 6.52 7.24 7.96 8.69 9.41 10.14 11.58 14.48 17.38 20.27 23.17
x 278 2.2 124 10.33 3.88 4.52 5.17 5.81 6.46 7.10 7.75 8.40 9.04 10.33 12.92 15.50 18.08 20.67
x 277 1.99 139 11.58 4.34 5.07 5.79 6.52 7.24 7.96 8.69 9.41 10.14 11.58 14.48 17.38 20.27 23.17
x 264 2.1 124 10.33 3.88 4.52 5.17 5.81 6.46 7.10 7.75 8.40 9.04 10.33 12.92 15.50 18.08 20.67
x 249 1.79 139 11.58 4.34 5.07 5.79 6.52 7.24 7.96 8.69 9.41 10.14 11.58 14.48 17.38 20.27 23.17
x 235 1.87 124 10.33 3.88 4.52 5.17 5.81 6.46 7.10 7.75 8.40 9.04 10.33 12.92 15.50 18.08 20.67
x 215 1.56 138 11.50 4.31 5.03 5.75 6.47 7.19 7.91 8.63 9.34 10.06 11.50 14.38 17.25 20.13 23.00
x 211 1.7 123 10.25 3.84 4.48 5.13 5.77 6.41 7.05 7.69 8.33 8.97 10.25 12.81 15.38 17.94 20.50
x 199 1.45 137 11.42 4.28 4.99 5.71 6.42 7.14 7.85 8.56 9.28 9.99 11.42 14.27 17.13 19.98 22.83
x 183 1.48 122 10.17 3.81 4.45 5.08 5.72 6.35 6.99 7.63 8.26 8.90 10.17 12.71 15.25 17.79 20.33
x 174 1.26 138 11.50 4.31 5.03 5.75 6.47 7.19 7.91 8.63 9.34 10.06 11.50 14.38 17.25 20.13 23.00
x 167 1.36 121 10.08 3.78 4.41 5.04 5.67 6.30 6.93 7.56 8.19 8.82 10.08 12.60 15.13 17.65 20.17
x 149 1.22 121 10.08 3.78 4.41 5.04 5.67 6.30 6.93 7.56 8.19 8.82 10.08 12.60 15.13 17.65 20.17
W 36 x 848 5.57 152 12.67 4.75 5.54 6.33 7.13 7.92 8.71 9.50 10.29 11.08 12.67 15.83 19.00 22.17 25.33
x 798 5.28 149 12.42 4.66 5.43 6.21 6.98 7.76 8.54 9.31 10.09 10.86 12.42 15.52 18.63 21.73 24.83
x 650 4.41 146 12.17 4.56 5.32 6.08 6.84 7.60 8.36 9.13 9.89 10.65 12.17 15.21 18.25 21.29 24.33
x 527 3.65 142 11.83 4.44 5.18 5.92 6.66 7.40 8.14 8.88 9.61 10.35 11.83 14.79 17.75 20.71 23.67
x 439 3.1 140 11.67 4.38 5.10 5.83 6.56 7.29 8.02 8.75 9.48 10.21 11.67 14.58 17.50 20.42 23.33
x 393 2.8 138 11.50 4.31 5.03 5.75 6.47 7.19 7.91 8.63 9.34 10.06 11.50 14.38 17.25 20.13 23.00
x 359 2.57 137 11.42 4.28 4.99 5.71 6.42 7.14 7.85 8.56 9.28 9.99 11.42 14.27 17.13 19.98 22.83
x 328 2.36 137 11.42 4.28 4.99 5.71 6.42 7.14 7.85 8.56 9.28 9.99 11.42 14.27 17.13 19.98 22.83
x 300 2.17 136 11.33 4.25 4.96 5.67 6.38 7.08 7.79 8.50 9.21 9.92 11.33 14.17 17.00 19.83 22.67
x 280 2.03 136 11.33 4.25 4.96 5.67 6.38 7.08 7.79 8.50 9.21 9.92 11.33 14.17 17.00 19.83 22.67
x 260 1.9 135 11.25 4.22 4.92 5.63 6.33 7.03 7.73 8.44 9.14 9.84 11.25 14.06 16.88 19.69 22.50
x 256 2.1 120 10.00 3.75 4.38 5.00 5.63 6.25 6.88 7.50 8.13 8.75 10.00 12.50 15.00 17.50 20.00
x 245 1.79 135 11.25 4.22 4.92 5.63 6.33 7.03 7.73 8.44 9.14 9.84 11.25 14.06 16.88 19.69 22.50
x 232 1.92 120 10.00 3.75 4.38 5.00 5.63 6.25 6.88 7.50 8.13 8.75 10.00 12.50 15.00 17.50 20.00
x 230 1.69 134 11.17 4.19 4.89 5.58 6.28 6.98 7.68 8.38 9.07 9.77 11.17 13.96 16.75 19.54 22.33
x 210 1.74 119 9.92 3.72 4.34 4.96 5.58 6.20 6.82 7.44 8.06 8.68 9.92 12.40 14.88 17.35 19.83
x 194 1.62 119 9.92 3.72 4.34 4.96 5.58 6.20 6.82 7.44 8.06 8.68 9.92 12.40 14.88 17.35 19.83
x 182 1.52 119 9.92 3.72 4.34 4.96 5.58 6.20 6.82 7.44 8.06 8.68 9.92 12.40 14.88 17.35 19.83
x 170 1.43 118 9.83 3.69 4.30 4.92 5.53 6.15 6.76 7.38 7.99 8.60 9.83 12.29 14.75 17.21 19.67
x 160 1.35 118 9.83 3.69 4.30 4.92 5.53 6.15 6.76 7.38 7.99 8.60 9.83 12.29 14.75 17.21 19.67
x 150 1.27 117 9.75 3.66 4.27 4.88 5.48 6.09 6.70 7.31 7.92 8.53 9.75 12.19 14.63 17.06 19.50
x 135 1.15 117 9.75 3.66 4.27 4.88 5.48 6.09 6.70 7.31 7.92 8.53 9.75 12.19 14.63 17.06 19.50
W 33 x 387 2.91 133 11.08 4.16 4.85 5.54 6.23 6.93 7.62 8.31 9.01 9.70 11.08 13.85 16.63 19.40 22.17
x 354 2.68 132 11.00 4.13 4.81 5.50 6.19 6.88 7.56 8.25 8.94 9.63 11.00 13.75 16.50 19.25 22.00
x 318 2.43 131 10.92 4.09 4.78 5.46 6.14 6.82 7.51 8.19 8.87 9.55 10.92 13.65 16.38 19.10 21.83
W33 x 291 2.24 130 10.83 4.06 4.74 5.42 6.09 6.77 7.45 8.13 8.80 9.48 10.83 13.54 16.25 18.96 21.67
x 263 2.04 129 10.75 4.03 4.70 5.38 6.05 6.72 7.39 8.06 8.73 9.41 10.75 13.44 16.13 18.81 21.50
x 241 1.87 129 10.75 4.03 4.70 5.38 6.05 6.72 7.39 8.06 8.73 9.41 10.75 13.44 16.13 18.81 21.50
x 221 1.73 128 10.67 4.00 4.67 5.33 6.00 6.67 7.33 8.00 8.67 9.33 10.67 13.33 16.00 18.67 21.33
x 201 1.58 127 10.58 3.97 4.63 5.29 5.95 6.61 7.28 7.94 8.60 9.26 10.58 13.23 15.88 18.52 21.17
x 169 1.52 111 9.25 3.47 4.05 4.63 5.20 5.78 6.36 6.94 7.52 8.09 9.25 11.56 13.88 16.19 18.50
x 152 1.37 111 9.25 3.47 4.05 4.63 5.20 5.78 6.36 6.94 7.52 8.09 9.25 11.56 13.88 16.19 18.50
x 141 1.28 110 9.17 3.44 4.01 4.58 5.16 5.73 6.30 6.88 7.45 8.02 9.17 11.46 13.75 16.04 18.33
x 130 1.18 110 9.17 3.44 4.01 4.58 5.16 5.73 6.30 6.88 7.45 8.02 9.17 11.46 13.75 16.04 18.33
x 118 1.08 109 9.08 3.41 3.97 4.54 5.11 5.68 6.24 6.81 7.38 7.95 9.08 11.35 13.63 15.90 18.17
W 30 x 477 3.71 128 10.67 4.00 4.67 5.33 6.00 6.67 7.33 8.00 8.67 9.33 10.67 13.33 16.00 18.67 21.33
x 391 3.13 125 10.42 3.91 4.56 5.21 5.86 6.51 7.16 7.81 8.46 9.11 10.42 13.02 15.63 18.23 20.83
x 357 2.88 124 10.33 3.88 4.52 5.17 5.81 6.46 7.10 7.75 8.40 9.04 10.33 12.92 15.50 18.08 20.67
x 326 2.65 123 10.25 3.84 4.48 5.13 5.77 6.41 7.05 7.69 8.33 8.97 10.25 12.81 15.38 17.94 20.50
x 292 2.39 122 10.17 3.81 4.45 5.08 5.72 6.35 6.99 7.63 8.26 8.90 10.17 12.71 15.25 17.79 20.33
x 261 2.16 121 10.08 3.78 4.41 5.04 5.67 6.30 6.93 7.56 8.19 8.82 10.08 12.60 15.13 17.65 20.17
x 235 1.96 120 10.00 3.75 4.38 5.00 5.63 6.25 6.88 7.50 8.13 8.75 10.00 12.50 15.00 17.50 20.00
x 211 1.76 120 10.00 3.75 4.38 5.00 5.63 6.25 6.88 7.50 8.13 8.75 10.00 12.50 15.00 17.50 20.00
x 191 1.62 118 9.83 3.69 4.30 4.92 5.53 6.15 6.76 7.38 7.99 8.60 9.83 12.29 14.75 17.21 19.67
x 173 1.45 119 9.92 3.72 4.34 4.96 5.58 6.20 6.82 7.44 8.06 8.68 9.92 12.40 14.88 17.35 19.83
x 148 1.47 101 8.42 3.16 3.68 4.21 4.73 5.26 5.79 6.31 6.84 7.36 8.42 10.52 12.63 14.73 16.83
x 132 1.32 100 8.33 3.13 3.65 4.17 4.69 5.21 5.73 6.25 6.77 7.29 8.33 10.42 12.50 14.58 16.67
x 124 1.24 99.8 8.32 3.12 3.64 4.16 4.68 5.20 5.72 6.24 6.76 7.28 8.32 10.40 12.48 14.55 16.63
x 116 1.16 99.6 8.30 3.11 3.63 4.15 4.67 5.19 5.71 6.23 6.74 7.26 8.30 10.38 12.45 14.53 16.60
x 108 1.09 99.4 8.28 3.11 3.62 4.14 4.66 5.18 5.69 6.21 6.73 7.25 8.28 10.35 12.43 14.50 16.57
x 99 1 99 8.25 3.09 3.61 4.13 4.64 5.16 5.67 6.19 6.70 7.22 8.25 10.31 12.38 14.44 16.50
x 90 0.915 98.4 8.20 3.08 3.59 4.10 4.61 5.13 5.64 6.15 6.66 7.18 8.20 10.25 12.30 14.35 16.40
W 27 x 539 4.45 121 10.08 3.78 4.41 5.04 5.67 6.30 6.93 7.56 8.19 8.82 10.08 12.60 15.13 17.65 20.17
x 448 3.76 119 9.92 3.72 4.34 4.96 5.58 6.20 6.82 7.44 8.06 8.68 9.92 12.40 14.88 17.35 19.83
x 368 3.17 116 9.67 3.63 4.23 4.83 5.44 6.04 6.65 7.25 7.85 8.46 9.67 12.08 14.50 16.92 19.33
x 336 2.92 115 9.58 3.59 4.19 4.79 5.39 5.99 6.59 7.19 7.79 8.39 9.58 11.98 14.38 16.77 19.17
x 307 2.72 113 9.42 3.53 4.12 4.71 5.30 5.89 6.47 7.06 7.65 8.24 9.42 11.77 14.13 16.48 18.83
x 281 2.49 113 9.42 3.53 4.12 4.71 5.30 5.89 6.47 7.06 7.65 8.24 9.42 11.77 14.13 16.48 18.83
x 258 2.3 112 9.33 3.50 4.08 4.67 5.25 5.83 6.42 7.00 7.58 8.17 9.33 11.67 14.00 16.33 18.67
x 235 2.12 111 9.25 3.47 4.05 4.63 5.20 5.78 6.36 6.94 7.52 8.09 9.25 11.56 13.88 16.19 18.50
x 217 1.97 110 9.17 3.44 4.01 4.58 5.16 5.73 6.30 6.88 7.45 8.02 9.17 11.46 13.75 16.04 18.33
x 194 1.76 110 9.17 3.44 4.01 4.58 5.16 5.73 6.30 6.88 7.45 8.02 9.17 11.46 13.75 16.04 18.33
x 178 1.63 109 9.08 3.41 3.97 4.54 5.11 5.68 6.24 6.81 7.38 7.95 9.08 11.35 13.63 15.90 18.17
x 161 1.48 109 9.08 3.41 3.97 4.54 5.11 5.68 6.24 6.81 7.38 7.95 9.08 11.35 13.63 15.90 18.17
x 146 1.35 108 9.00 3.38 3.94 4.50 5.06 5.63 6.19 6.75 7.31 7.88 9.00 11.25 13.50 15.75 18.00
W 24 x 129 1.39 92.8 7.73 2.90 3.38 3.87 4.35 4.83 5.32 5.80 6.28 6.77 7.73 9.67 11.60 13.53 15.47
x 114 1.23 92.4 7.70 2.89 3.37 3.85 4.33 4.81 5.29 5.78 6.26 6.74 7.70 9.63 11.55 13.48 15.40
x 102 1.11 92.1 7.68 2.88 3.36 3.84 4.32 4.80 5.28 5.76 6.24 6.72 7.68 9.59 11.51 13.43 15.35
x 94 1.03 91.5 7.63 2.86 3.34 3.81 4.29 4.77 5.24 5.72 6.20 6.67 7.63 9.53 11.44 13.34 15.25
x 84 0.921 91.2 7.60 2.85 3.33 3.80 4.28 4.75 5.23 5.70 6.18 6.65 7.60 9.50 11.40 13.30 15.20
x 492 4.4 111 9.25 3.47 4.05 4.63 5.20 5.78 6.36 6.94 7.52 8.09 9.25 11.56 13.88 16.19 18.50
x 408 3.74 108 9.00 3.38 3.94 4.50 5.06 5.63 6.19 6.75 7.31 7.88 9.00 11.25 13.50 15.75 18.00
x 370 3.46 107 8.92 3.34 3.90 4.46 5.02 5.57 6.13 6.69 7.24 7.80 8.92 11.15 13.38 15.60 17.83
x 335 3.19 105 8.75 3.28 3.83 4.38 4.92 5.47 6.02 6.56 7.11 7.66 8.75 10.94 13.13 15.31 17.50
x 306 2.94 104 8.67 3.25 3.79 4.33 4.88 5.42 5.96 6.50 7.04 7.58 8.67 10.83 13.00 15.17 17.33
x 279 2.71 103 8.58 3.22 3.76 4.29 4.83 5.36 5.90 6.44 6.97 7.51 8.58 10.73 12.88 15.02 17.17
x 250 2.45 102 8.50 3.19 3.72 4.25 4.78 5.31 5.84 6.38 6.91 7.44 8.50 10.63 12.75 14.88 17.00
x 229 2.27 101 8.42 3.16 3.68 4.21 4.73 5.26 5.79 6.31 6.84 7.36 8.42 10.52 12.63 14.73 16.83
x 207 2.05 101 8.42 3.16 3.68 4.21 4.73 5.26 5.79 6.31 6.84 7.36 8.42 10.52 12.63 14.73 16.83
W24 x 192 1.92 100 8.33 3.13 3.65 4.17 4.69 5.21 5.73 6.25 6.77 7.29 8.33 10.42 12.50 14.58 16.67
x 176 1.77 99.4 8.28 3.11 3.62 4.14 4.66 5.18 5.69 6.21 6.73 7.25 8.28 10.35 12.43 14.50 16.57
x 162 1.63 99.3 8.28 3.10 3.62 4.14 4.65 5.17 5.69 6.21 6.72 7.24 8.28 10.34 12.41 14.48 16.55
x 146 1.48 98.7 8.23 3.08 3.60 4.11 4.63 5.14 5.65 6.17 6.68 7.20 8.23 10.28 12.34 14.39 16.45
x 131 1.33 98.2 8.18 3.07 3.58 4.09 4.60 5.11 5.63 6.14 6.65 7.16 8.18 10.23 12.28 14.32 16.37
x 117 1.2 97.3 8.11 3.04 3.55 4.05 4.56 5.07 5.57 6.08 6.59 7.09 8.11 10.14 12.16 14.19 16.22
x 104 1.07 96.9 8.08 3.03 3.53 4.04 4.54 5.05 5.55 6.06 6.56 7.07 8.08 10.09 12.11 14.13 16.15
x 103 1.25 82.5 6.88 2.58 3.01 3.44 3.87 4.30 4.73 5.16 5.59 6.02 6.88 8.59 10.31 12.03 13.75
x 94 1.14 82.5 6.88 2.58 3.01 3.44 3.87 4.30 4.73 5.16 5.59 6.02 6.88 8.59 10.31 12.03 13.75
x 84 1.02 82.2 6.85 2.57 3.00 3.43 3.85 4.28 4.71 5.14 5.57 5.99 6.85 8.56 10.28 11.99 13.70
x 76 0.933 81.5 6.79 2.55 2.97 3.40 3.82 4.24 4.67 5.09 5.52 5.94 6.79 8.49 10.19 11.89 13.58
x 68 0.837 81.2 6.77 2.54 2.96 3.38 3.81 4.23 4.65 5.08 5.50 5.92 6.77 8.46 10.15 11.84 13.53
x 62 0.844 73.5 6.13 2.30 2.68 3.06 3.45 3.83 4.21 4.59 4.98 5.36 6.13 7.66 9.19 10.72 12.25
x 55 0.749 73.4 6.12 2.29 2.68 3.06 3.44 3.82 4.21 4.59 4.97 5.35 6.12 7.65 9.18 10.70 12.23
W 21 x 201 2.16 93.1 7.76 2.91 3.39 3.88 4.36 4.85 5.33 5.82 6.30 6.79 7.76 9.70 11.64 13.58 15.52
x 182 1.97 92.5 7.71 2.89 3.37 3.85 4.34 4.82 5.30 5.78 6.26 6.74 7.71 9.64 11.56 13.49 15.42
x 166 1.81 91.9 7.66 2.87 3.35 3.83 4.31 4.79 5.27 5.74 6.22 6.70 7.66 9.57 11.49 13.40 15.32
x 147 1.61 91.2 7.60 2.85 3.33 3.80 4.28 4.75 5.23 5.70 6.18 6.65 7.60 9.50 11.40 13.30 15.20
x 132 1.45 90.9 7.58 2.84 3.31 3.79 4.26 4.73 5.21 5.68 6.15 6.63 7.58 9.47 11.36 13.26 15.15
x 122 1.35 90.3 7.53 2.82 3.29 3.76 4.23 4.70 5.17 5.64 6.11 6.58 7.53 9.41 11.29 13.17 15.05
x 111 1.24 89.7 7.48 2.80 3.27 3.74 4.20 4.67 5.14 5.61 6.07 6.54 7.48 9.34 11.21 13.08 14.95
x 101 1.13 89.7 7.48 2.80 3.27 3.74 4.20 4.67 5.14 5.61 6.07 6.54 7.48 9.34 11.21 13.08 14.95
x 93 1.24 74.8 6.23 2.34 2.73 3.12 3.51 3.90 4.29 4.68 5.06 5.45 6.23 7.79 9.35 10.91 12.47
x 83 1.12 74.2 6.18 2.32 2.71 3.09 3.48 3.86 4.25 4.64 5.02 5.41 6.18 7.73 9.28 10.82 12.37
x 73 0.989 73.8 6.15 2.31 2.69 3.08 3.46 3.84 4.23 4.61 5.00 5.38 6.15 7.69 9.23 10.76 12.30
x 68 0.926 73.4 6.12 2.29 2.68 3.06 3.44 3.82 4.21 4.59 4.97 5.35 6.12 7.65 9.18 10.70 12.23
x 62 0.846 73.3 6.11 2.29 2.67 3.05 3.44 3.82 4.20 4.58 4.96 5.34 6.11 7.64 9.16 10.69 12.22
x 57 0.857 66.5 5.54 2.08 2.42 2.77 3.12 3.46 3.81 4.16 4.50 4.85 5.54 6.93 8.31 9.70 11.08
x 50 0.754 66.3 5.53 2.07 2.42 2.76 3.11 3.45 3.80 4.14 4.49 4.83 5.53 6.91 8.29 9.67 11.05
x 44 0.672 65.5 5.46 2.05 2.39 2.73 3.07 3.41 3.75 4.09 4.43 4.78 5.46 6.82 8.19 9.55 10.92
W 18 x 311 3.47 89.6 7.47 2.80 3.27 3.73 4.20 4.67 5.13 5.60 6.07 6.53 7.47 9.33 11.20 13.07 14.93
x 283 3.2 88.4 7.37 2.76 3.22 3.68 4.14 4.60 5.06 5.53 5.99 6.45 7.37 9.21 11.05 12.89 14.73
x 258 2.95 87.4 7.28 2.73 3.19 3.64 4.10 4.55 5.01 5.46 5.92 6.37 7.28 9.10 10.93 12.75 14.57
x 234 2.71 86.4 7.20 2.70 3.15 3.60 4.05 4.50 4.95 5.40 5.85 6.30 7.20 9.00 10.80 12.60 14.40
x 211 2.47 85.4 7.12 2.67 3.11 3.56 4.00 4.45 4.89 5.34 5.78 6.23 7.12 8.90 10.68 12.45 14.23
x 192 2.27 84.6 7.05 2.64 3.08 3.53 3.97 4.41 4.85 5.29 5.73 6.17 7.05 8.81 10.58 12.34 14.10
x 175 2.12 82.5 6.88 2.58 3.01 3.44 3.87 4.30 4.73 5.16 5.59 6.02 6.88 8.59 10.31 12.03 13.75
x 158 1.93 81.8 6.82 2.56 2.98 3.41 3.83 4.26 4.69 5.11 5.54 5.96 6.82 8.52 10.23 11.93 13.63
x 143 1.77 81 6.75 2.53 2.95 3.38 3.80 4.22 4.64 5.06 5.48 5.91 6.75 8.44 10.13 11.81 13.50
x 130 1.61 80.5 6.71 2.52 2.93 3.35 3.77 4.19 4.61 5.03 5.45 5.87 6.71 8.39 10.06 11.74 13.42
x 119 1.48 80.5 6.71 2.52 2.93 3.35 3.77 4.19 4.61 5.03 5.45 5.87 6.71 8.39 10.06 11.74 13.42
x 106 1.33 79.8 6.65 2.49 2.91 3.33 3.74 4.16 4.57 4.99 5.40 5.82 6.65 8.31 9.98 11.64 13.30
x 97 1.22 79.2 6.60 2.48 2.89 3.30 3.71 4.13 4.54 4.95 5.36 5.78 6.60 8.25 9.90 11.55 13.20
x 86 1.09 78.9 6.58 2.47 2.88 3.29 3.70 4.11 4.52 4.93 5.34 5.75 6.58 8.22 9.86 11.51 13.15
x 76 0.971 78.3 6.53 2.45 2.85 3.26 3.67 4.08 4.49 4.89 5.30 5.71 6.53 8.16 9.79 11.42 13.05
x 71 1.08 65.6 5.47 2.05 2.39 2.73 3.08 3.42 3.76 4.10 4.44 4.78 5.47 6.83 8.20 9.57 10.93
x 65 0.997 65.2 5.43 2.04 2.38 2.72 3.06 3.40 3.74 4.08 4.41 4.75 5.43 6.79 8.15 9.51 10.87
x 60 0.923 65 5.42 2.03 2.37 2.71 3.05 3.39 3.72 4.06 4.40 4.74 5.42 6.77 8.13 9.48 10.83
x 55 0.85 64.7 5.39 2.02 2.36 2.70 3.03 3.37 3.71 4.04 4.38 4.72 5.39 6.74 8.09 9.44 10.78
x 50 0.778 64.3 5.36 2.01 2.34 2.68 3.01 3.35 3.68 4.02 4.35 4.69 5.36 6.70 8.04 9.38 10.72
W 18 x 46 0.786 58.5 4.88 1.83 2.13 2.44 2.74 3.05 3.35 3.66 3.96 4.27 4.88 6.09 7.31 8.53 9.75
x 40 0.688 58.1 4.84 1.82 2.12 2.42 2.72 3.03 3.33 3.63 3.93 4.24 4.84 6.05 7.26 8.47 9.68
x 35 0.602 58.1 4.84 1.82 2.12 2.42 2.72 3.03 3.33 3.63 3.93 4.24 4.84 6.05 7.26 8.47 9.68
W 16 x 100 1.37 73.1 6.09 2.28 2.67 3.05 3.43 3.81 4.19 4.57 4.95 5.33 6.09 7.61 9.14 10.66 12.18
x 89 1.22 72.8 6.07 2.28 2.65 3.03 3.41 3.79 4.17 4.55 4.93 5.31 6.07 7.58 9.10 10.62 12.13
x 77 1.07 71.9 5.99 2.25 2.62 3.00 3.37 3.74 4.12 4.49 4.87 5.24 5.99 7.49 8.99 10.49 11.98
x 67 0.936 71.6 5.97 2.24 2.61 2.98 3.36 3.73 4.10 4.48 4.85 5.22 5.97 7.46 8.95 10.44 11.93
x 57 0.963 59.2 4.93 1.85 2.16 2.47 2.78 3.08 3.39 3.70 4.01 4.32 4.93 6.17 7.40 8.63 9.87
x 50 0.846 59.1 4.93 1.85 2.15 2.46 2.77 3.08 3.39 3.69 4.00 4.31 4.93 6.16 7.39 8.62 9.85
x 45 0.767 58.7 4.89 1.83 2.14 2.45 2.75 3.06 3.36 3.67 3.97 4.28 4.89 6.11 7.34 8.56 9.78
x 40 0.686 58.3 4.86 1.82 2.13 2.43 2.73 3.04 3.34 3.64 3.95 4.25 4.86 6.07 7.29 8.50 9.72
x 36 0.617 58.3 4.86 1.82 2.13 2.43 2.73 3.04 3.34 3.64 3.95 4.25 4.86 6.07 7.29 8.50 9.72
x 31 0.592 52.4 4.37 1.64 1.91 2.18 2.46 2.73 3.00 3.28 3.55 3.82 4.37 5.46 6.55 7.64 8.73
x 26 0.499 52.1 4.34 1.63 1.90 2.17 2.44 2.71 2.98 3.26 3.53 3.80 4.34 5.43 6.51 7.60 8.68
W 14 x 808 7.28 111 9.25 3.47 4.05 4.63 5.20 5.78 6.36 6.94 7.52 8.09 9.25 11.56 13.88 16.19 18.50
x 730 6.76 108 9.00 3.38 3.94 4.50 5.06 5.63 6.19 6.75 7.31 7.88 9.00 11.25 13.50 15.75 18.00
x 665 6.21 107 8.92 3.34 3.90 4.46 5.02 5.57 6.13 6.69 7.24 7.80 8.92 11.15 13.38 15.60 17.83
x 605 5.82 104 8.67 3.25 3.79 4.33 4.88 5.42 5.96 6.50 7.04 7.58 8.67 10.83 13.00 15.17 17.33
x 550 5.34 103 8.58 3.22 3.76 4.29 4.83 5.36 5.90 6.44 6.97 7.51 8.58 10.73 12.88 15.02 17.17
x 500 4.95 101 8.42 3.16 3.68 4.21 4.73 5.26 5.79 6.31 6.84 7.36 8.42 10.52 12.63 14.73 16.83
x 455 4.59 99.1 8.26 3.10 3.61 4.13 4.65 5.16 5.68 6.19 6.71 7.23 8.26 10.32 12.39 14.45 16.52
x 426 4.32 98.5 8.21 3.08 3.59 4.10 4.62 5.13 5.64 6.16 6.67 7.18 8.21 10.26 12.31 14.36 16.42
x 398 4.09 97.3 8.11 3.04 3.55 4.05 4.56 5.07 5.57 6.08 6.59 7.09 8.11 10.14 12.16 14.19 16.22
x 370 3.84 96.4 8.03 3.01 3.51 4.02 4.52 5.02 5.52 6.03 6.53 7.03 8.03 10.04 12.05 14.06 16.07
x 342 3.58 95.5 7.96 2.98 3.48 3.98 4.48 4.97 5.47 5.97 6.47 6.96 7.96 9.95 11.94 13.93 15.92
x 311 3.3 94.3 7.86 2.95 3.44 3.93 4.42 4.91 5.40 5.89 6.38 6.88 7.86 9.82 11.79 13.75 15.72
x 283 3.03 93.4 7.78 2.92 3.41 3.89 4.38 4.86 5.35 5.84 6.32 6.81 7.78 9.73 11.68 13.62 15.57
x 257 2.78 92.5 7.71 2.89 3.37 3.85 4.34 4.82 5.30 5.78 6.26 6.74 7.71 9.64 11.56 13.49 15.42
x 233 2.55 91.5 7.63 2.86 3.34 3.81 4.29 4.77 5.24 5.72 6.20 6.67 7.63 9.53 11.44 13.34 15.25
x 211 2.32 91 7.58 2.84 3.32 3.79 4.27 4.74 5.21 5.69 6.16 6.64 7.58 9.48 11.38 13.27 15.17
x 193 2.14 90 7.50 2.81 3.28 3.75 4.22 4.69 5.16 5.63 6.09 6.56 7.50 9.38 11.25 13.13 15.00
x 176 1.96 89.8 7.48 2.81 3.27 3.74 4.21 4.68 5.14 5.61 6.08 6.55 7.48 9.35 11.23 13.10 14.97
x 159 1.78 89.1 7.43 2.78 3.25 3.71 4.18 4.64 5.10 5.57 6.03 6.50 7.43 9.28 11.14 12.99 14.85
x 145 1.64 88.2 7.35 2.76 3.22 3.68 4.13 4.59 5.05 5.51 5.97 6.43 7.35 9.19 11.03 12.86 14.70
x 132 1.56 84.7 7.06 2.65 3.09 3.53 3.97 4.41 4.85 5.29 5.73 6.18 7.06 8.82 10.59 12.35 14.12
x 120 1.42 84.8 7.07 2.65 3.09 3.53 3.98 4.42 4.86 5.30 5.74 6.18 7.07 8.83 10.60 12.37 14.13
x 109 1.29 84.2 7.02 2.63 3.07 3.51 3.95 4.39 4.82 5.26 5.70 6.14 7.02 8.77 10.53 12.28 14.03
x 99 1.18 83.8 6.98 2.62 3.06 3.49 3.93 4.36 4.80 5.24 5.67 6.11 6.98 8.73 10.48 12.22 13.97
x 90 1.08 83.2 6.93 2.60 3.03 3.47 3.90 4.33 4.77 5.20 5.63 6.07 6.93 8.67 10.40 12.13 13.87
x 82 1.23 66.6 5.55 2.08 2.43 2.78 3.12 3.47 3.82 4.16 4.51 4.86 5.55 6.94 8.33 9.71 11.10
x 74 1.12 66.3 5.53 2.07 2.42 2.76 3.11 3.45 3.80 4.14 4.49 4.83 5.53 6.91 8.29 9.67 11.05
x 68 1.04 65.7 5.48 2.05 2.40 2.74 3.08 3.42 3.76 4.11 4.45 4.79 5.48 6.84 8.21 9.58 10.95
x 61 0.928 65.7 5.48 2.05 2.40 2.74 3.08 3.42 3.76 4.11 4.45 4.79 5.48 6.84 8.21 9.58 10.95
x 53 0.915 57.9 4.83 1.81 2.11 2.41 2.71 3.02 3.32 3.62 3.92 4.22 4.83 6.03 7.24 8.44 9.65
x 48 0.835 57.5 4.79 1.80 2.10 2.40 2.70 2.99 3.29 3.59 3.89 4.19 4.79 5.99 7.19 8.39 9.58
x 43 0.752 57.2 4.77 1.79 2.09 2.38 2.68 2.98 3.28 3.58 3.87 4.17 4.77 5.96 7.15 8.34 9.53
x 38 0.706 53.8 4.48 1.68 1.96 2.24 2.52 2.80 3.08 3.36 3.64 3.92 4.48 5.60 6.73 7.85 8.97
x 34 0.633 53.7 4.48 1.68 1.96 2.24 2.52 2.80 3.08 3.36 3.64 3.92 4.48 5.59 6.71 7.83 8.95
x 30 0.562 53.4 4.45 1.67 1.95 2.23 2.50 2.78 3.06 3.34 3.62 3.89 4.45 5.56 6.68 7.79 8.90
x 26 0.559 46.5 3.88 1.45 1.70 1.94 2.18 2.42 2.66 2.91 3.15 3.39 3.88 4.84 5.81 6.78 7.75
x 22 0.476 46.2 3.85 1.44 1.68 1.93 2.17 2.41 2.65 2.89 3.13 3.37 3.85 4.81 5.78 6.74 7.70
W 12 x 336 4.06 82.7 6.89 2.58 3.02 3.45 3.88 4.31 4.74 5.17 5.60 6.03 6.89 8.61 10.34 12.06 13.78
W 12 x 305 3.76 81.1 6.76 2.53 2.96 3.38 3.80 4.22 4.65 5.07 5.49 5.91 6.76 8.45 10.14 11.83 13.52
x 279 3.5 79.7 6.64 2.49 2.91 3.32 3.74 4.15 4.57 4.98 5.40 5.81 6.64 8.30 9.96 11.62 13.28
x 252 3.2 78.7 6.56 2.46 2.87 3.28 3.69 4.10 4.51 4.92 5.33 5.74 6.56 8.20 9.84 11.48 13.12
x 230 2.96 77.6 6.47 2.43 2.83 3.23 3.64 4.04 4.45 4.85 5.25 5.66 6.47 8.08 9.70 11.32 12.93
x 210 2.73 77 6.42 2.41 2.81 3.21 3.61 4.01 4.41 4.81 5.21 5.61 6.42 8.02 9.63 11.23 12.83
x 190 2.5 76.1 6.34 2.38 2.77 3.17 3.57 3.96 4.36 4.76 5.15 5.55 6.34 7.93 9.51 11.10 12.68
x 170 2.26 75.2 6.27 2.35 2.74 3.13 3.53 3.92 4.31 4.70 5.09 5.48 6.27 7.83 9.40 10.97 12.53
x 152 2.04 74.6 6.22 2.33 2.72 3.11 3.50 3.89 4.27 4.66 5.05 5.44 6.22 7.77 9.33 10.88 12.43
x 136 1.86 73.3 6.11 2.29 2.67 3.05 3.44 3.82 4.20 4.58 4.96 5.34 6.11 7.64 9.16 10.69 12.22
x 120 1.65 72.7 6.06 2.27 2.65 3.03 3.41 3.79 4.17 4.54 4.92 5.30 6.06 7.57 9.09 10.60 12.12
x 106 1.47 72.1 6.01 2.25 2.63 3.00 3.38 3.76 4.13 4.51 4.88 5.26 6.01 7.51 9.01 10.51 12.02
x 96 1.34 71.9 5.99 2.25 2.62 3.00 3.37 3.74 4.12 4.49 4.87 5.24 5.99 7.49 8.99 10.49 11.98
x 87 1.22 71.2 5.93 2.23 2.60 2.97 3.34 3.71 4.08 4.45 4.82 5.19 5.93 7.42 8.90 10.38 11.87
x 79 1.11 70.9 5.91 2.22 2.58 2.95 3.32 3.69 4.06 4.43 4.80 5.17 5.91 7.39 8.86 10.34 11.82
x 72 1.02 70.3 5.86 2.20 2.56 2.93 3.30 3.66 4.03 4.39 4.76 5.13 5.86 7.32 8.79 10.25 11.72
x 65 0.925 70.3 5.86 2.20 2.56 2.93 3.30 3.66 4.03 4.39 4.76 5.13 5.86 7.32 8.79 10.25 11.72
x 58 0.925 62.7 5.23 1.96 2.29 2.61 2.94 3.27 3.59 3.92 4.25 4.57 5.23 6.53 7.84 9.14 10.45
x 53 0.855 62 5.17 1.94 2.26 2.58 2.91 3.23 3.55 3.88 4.20 4.52 5.17 6.46 7.75 9.04 10.33
x 50 0.909 55 4.58 1.72 2.01 2.29 2.58 2.86 3.15 3.44 3.72 4.01 4.58 5.73 6.88 8.02 9.17
x 45 0.829 54.3 4.53 1.70 1.98 2.26 2.55 2.83 3.11 3.39 3.68 3.96 4.53 5.66 6.79 7.92 9.05
x 40 0.734 54.5 4.54 1.70 1.99 2.27 2.55 2.84 3.12 3.41 3.69 3.97 4.54 5.68 6.81 7.95 9.08
x 35 0.703 49.8 4.15 1.56 1.82 2.08 2.33 2.59 2.85 3.11 3.37 3.63 4.15 5.19 6.23 7.26 8.30
x 30 0.607 49.4 4.12 1.54 1.80 2.06 2.32 2.57 2.83 3.09 3.34 3.60 4.12 5.15 6.18 7.20 8.23
x 26 0.531 49 4.08 1.53 1.79 2.04 2.30 2.55 2.81 3.06 3.32 3.57 4.08 5.10 6.13 7.15 8.17
x 22 0.56 39.3 3.28 1.23 1.43 1.64 1.84 2.05 2.25 2.46 2.66 2.87 3.28 4.09 4.91 5.73 6.55
x 19 0.485 39.2 3.27 1.23 1.43 1.63 1.84 2.04 2.25 2.45 2.65 2.86 3.27 4.08 4.90 5.72 6.53
x 16 0.41 39 3.25 1.22 1.42 1.63 1.83 2.03 2.23 2.44 2.64 2.84 3.25 4.06 4.88 5.69 6.50
x 14 0.363 38.6 3.22 1.21 1.41 1.61 1.81 2.01 2.21 2.41 2.61 2.81 3.22 4.02 4.83 5.63 6.43
W 10 x 112 1.81 61.9 5.16 1.93 2.26 2.58 2.90 3.22 3.55 3.87 4.19 4.51 5.16 6.45 7.74 9.03 10.32
x 100 1.64 61 5.08 1.91 2.22 2.54 2.86 3.18 3.49 3.81 4.13 4.45 5.08 6.35 7.63 8.90 10.17
x 88 1.45 60.8 5.07 1.90 2.22 2.53 2.85 3.17 3.48 3.80 4.12 4.43 5.07 6.33 7.60 8.87 10.13
x 77 1.28 60.1 5.01 1.88 2.19 2.50 2.82 3.13 3.44 3.76 4.07 4.38 5.01 6.26 7.51 8.76 10.02
x 68 1.15 59.2 4.93 1.85 2.16 2.47 2.78 3.08 3.39 3.70 4.01 4.32 4.93 6.17 7.40 8.63 9.87
x 60 1.01 59.2 4.93 1.85 2.16 2.47 2.78 3.08 3.39 3.70 4.01 4.32 4.93 6.17 7.40 8.63 9.87
x 54 0.922 58.6 4.88 1.83 2.14 2.44 2.75 3.05 3.36 3.66 3.97 4.27 4.88 6.10 7.33 8.55 9.77
x 49 0.84 58.3 4.86 1.82 2.13 2.43 2.73 3.04 3.34 3.64 3.95 4.25 4.86 6.07 7.29 8.50 9.72
x 45 0.888 50.7 4.23 1.58 1.85 2.11 2.38 2.64 2.90 3.17 3.43 3.70 4.23 5.28 6.34 7.39 8.45
x 39 0.78 50 4.17 1.56 1.82 2.08 2.34 2.60 2.86 3.13 3.39 3.65 4.17 5.21 6.25 7.29 8.33
x 33 0.661 49.9 4.16 1.56 1.82 2.08 2.34 2.60 2.86 3.12 3.38 3.64 4.16 5.20 6.24 7.28 8.32
x 30 0.699 42.9 3.58 1.34 1.56 1.79 2.01 2.23 2.46 2.68 2.90 3.13 3.58 4.47 5.36 6.26 7.15
x 26 0.612 42.5 3.54 1.33 1.55 1.77 1.99 2.21 2.43 2.66 2.88 3.10 3.54 4.43 5.31 6.20 7.08
x 22 0.523 42.1 3.51 1.32 1.53 1.75 1.97 2.19 2.41 2.63 2.85 3.07 3.51 4.39 5.26 6.14 7.02
x 19 0.538 35.3 2.94 1.10 1.29 1.47 1.65 1.84 2.02 2.21 2.39 2.57 2.94 3.68 4.41 5.15 5.88
x 17 0.482 35.3 2.94 1.10 1.29 1.47 1.65 1.84 2.02 2.21 2.39 2.57 2.94 3.68 4.41 5.15 5.88
x 15 0.429 35 2.92 1.09 1.28 1.46 1.64 1.82 2.01 2.19 2.37 2.55 2.92 3.65 4.38 5.10 5.83
x 12 0.347 34.6 2.88 1.08 1.26 1.44 1.62 1.80 1.98 2.16 2.34 2.52 2.88 3.60 4.33 5.05 5.77
W 8 x 67 1.37 48.9 4.08 1.53 1.78 2.04 2.29 2.55 2.80 3.06 3.31 3.57 4.08 5.09 6.11 7.13 8.15
x 58 1.2 48.5 4.04 1.52 1.77 2.02 2.27 2.53 2.78 3.03 3.28 3.54 4.04 5.05 6.06 7.07 8.08
x 48 1 47.8 3.98 1.49 1.74 1.99 2.24 2.49 2.74 2.99 3.24 3.49 3.98 4.98 5.98 6.97 7.97
x 40 0.849 47.1 3.93 1.47 1.72 1.96 2.21 2.45 2.70 2.94 3.19 3.43 3.93 4.91 5.89 6.87 7.85
x 35 0.749 46.7 3.89 1.46 1.70 1.95 2.19 2.43 2.68 2.92 3.16 3.41 3.89 4.86 5.84 6.81 7.78
x 31 0.665 46.6 3.88 1.46 1.70 1.94 2.18 2.43 2.67 2.91 3.16 3.40 3.88 4.85 5.83 6.80 7.77
W 8 x 28 0.688 40.7 3.39 1.27 1.48 1.70 1.91 2.12 2.33 2.54 2.76 2.97 3.39 4.24 5.09 5.94 6.78
x 24 0.591 40.6 3.38 1.27 1.48 1.69 1.90 2.11 2.33 2.54 2.75 2.96 3.38 4.23 5.08 5.92 6.77
x 21 0.577 36.4 3.03 1.14 1.33 1.52 1.71 1.90 2.09 2.28 2.46 2.65 3.03 3.79 4.55 5.31 6.07
x 18 0.499 36.1 3.01 1.13 1.32 1.50 1.69 1.88 2.07 2.26 2.44 2.63 3.01 3.76 4.51 5.26 6.02
x 15 0.481 31.2 2.60 0.98 1.14 1.30 1.46 1.63 1.79 1.95 2.11 2.28 2.60 3.25 3.90 4.55 5.20
x 13 0.421 30.9 2.58 0.97 1.13 1.29 1.45 1.61 1.77 1.93 2.09 2.25 2.58 3.22 3.86 4.51 5.15
x 10 0.327 30.6 2.55 0.96 1.12 1.28 1.43 1.59 1.75 1.91 2.07 2.23 2.55 3.19 3.83 4.46 5.10
W 6 x 25 0.696 35.9 2.99 1.12 1.31 1.50 1.68 1.87 2.06 2.24 2.43 2.62 2.99 3.74 4.49 5.24 5.98
x 20 0.563 35.5 2.96 1.11 1.29 1.48 1.66 1.85 2.03 2.22 2.40 2.59 2.96 3.70 4.44 5.18 5.92
x 16 0.584 27.4 2.28 0.86 1.00 1.14 1.28 1.43 1.57 1.71 1.86 2.00 2.28 2.85 3.43 4.00 4.57
x 15 0.431 34.8 2.90 1.09 1.27 1.45 1.63 1.81 1.99 2.18 2.36 2.54 2.90 3.63 4.35 5.08 5.80
x 12 0.448 26.8 2.23 0.84 0.98 1.12 1.26 1.40 1.54 1.68 1.81 1.95 2.23 2.79 3.35 3.91 4.47
x9 0.338 26.6 2.22 0.83 0.97 1.11 1.25 1.39 1.52 1.66 1.80 1.94 2.22 2.77 3.33 3.88 4.43
x 8.5 0.32 26.6 2.22 0.83 0.97 1.11 1.25 1.39 1.52 1.66 1.80 1.94 2.22 2.77 3.33 3.88 4.43
W 5 x 19 0.644 29.5 2.46 0.92 1.08 1.23 1.38 1.54 1.69 1.84 2.00 2.15 2.46 3.07 3.69 4.30 4.92
x 16 0.55 29.1 2.43 0.91 1.06 1.21 1.36 1.52 1.67 1.82 1.97 2.12 2.43 3.03 3.64 4.24 4.85
W 4 x 13 0.556 23.4 1.95 0.73 0.85 0.98 1.10 1.22 1.34 1.46 1.58 1.71 1.95 2.44 2.93 3.41 3.90
BEAM BOARD FOOT CONVERSION FACTORS BD.FT PER L.FT / APPLIED PROTECTION THICKNESS
W 44 x 335 2.52 133 11.08 4.16 4.85 5.54 6.23 6.93 7.62 8.31 9.01 9.70 11.08 13.85 16.63 19.40 22.17
x 290 2.2 132 11.00 4.13 4.81 5.50 6.19 6.88 7.56 8.25 8.94 9.63 11.00 13.75 16.50 19.25 22.00
x 262 2 131 10.92 4.09 4.78 5.46 6.14 6.82 7.51 8.19 8.87 9.55 10.92 13.65 16.38 19.10 21.83
x 230 1.77 130 10.83 4.06 4.74 5.42 6.09 6.77 7.45 8.13 8.80 9.48 10.83 13.54 16.25 18.96 21.67
W 40 x 593 4.56 130 10.83 4.06 4.74 5.42 6.09 6.77 7.45 8.13 8.80 9.48 10.83 13.54 16.25 18.96 21.67
x 503 3.93 128 10.67 4.00 4.67 5.33 6.00 6.67 7.33 8.00 8.67 9.33 10.67 13.33 16.00 18.67 21.33
x 466 3.9 119 9.92 3.72 4.34 4.96 5.58 6.20 6.82 7.44 8.06 8.68 9.92 12.40 14.88 17.35 19.83
x 431 3.42 126 10.50 3.94 4.59 5.25 5.91 6.56 7.22 7.88 8.53 9.19 10.50 13.13 15.75 18.38 21.00
x 397 3.15 126 10.50 3.94 4.59 5.25 5.91 6.56 7.22 7.88 8.53 9.19 10.50 13.13 15.75 18.38 21.00
x 392 3.38 116 9.67 3.63 4.23 4.83 5.44 6.04 6.65 7.25 7.85 8.46 9.67 12.08 14.50 16.92 19.33
x 372 2.98 125 10.42 3.91 4.56 5.21 5.86 6.51 7.16 7.81 8.46 9.11 10.42 13.02 15.63 18.23 20.83
x 362 2.9 125 10.42 3.91 4.56 5.21 5.86 6.51 7.16 7.81 8.46 9.11 10.42 13.02 15.63 18.23 20.83
x 331 2.9 114 9.50 3.56 4.16 4.75 5.34 5.94 6.53 7.13 7.72 8.31 9.50 11.88 14.25 16.63 19.00
x 327 2.89 113 9.42 3.53 4.12 4.71 5.30 5.89 6.47 7.06 7.65 8.24 9.42 11.77 14.13 16.48 18.83
x 324 2.61 124 10.33 3.88 4.52 5.17 5.81 6.46 7.10 7.75 8.40 9.04 10.33 12.92 15.50 18.08 20.67
x 321 2.55 125 10.42 3.91 4.56 5.21 5.86 6.51 7.16 7.81 8.46 9.11 10.42 13.02 15.63 18.23 20.83
x 297 2.41 123 10.25 3.84 4.48 5.13 5.77 6.41 7.05 7.69 8.33 8.97 10.25 12.81 15.38 17.94 20.50
x 278 2.48 112 9.33 3.50 4.08 4.67 5.25 5.83 6.42 7.00 7.58 8.17 9.33 11.67 14.00 16.33 18.67
x 277 2.25 123 10.25 3.84 4.48 5.13 5.77 6.41 7.05 7.69 8.33 8.97 10.25 12.81 15.38 17.94 20.50
x 264 2.36 112 9.33 3.50 4.08 4.67 5.25 5.83 6.42 7.00 7.58 8.17 9.33 11.67 14.00 16.33 18.67
x 249 2.02 123 10.25 3.84 4.48 5.13 5.77 6.41 7.05 7.69 8.33 8.97 10.25 12.81 15.38 17.94 20.50
x 235 2.1 112 9.33 3.50 4.08 4.67 5.25 5.83 6.42 7.00 7.58 8.17 9.33 11.67 14.00 16.33 18.67
x 215 1.76 122 10.17 3.81 4.45 5.08 5.72 6.35 6.99 7.63 8.26 8.90 10.17 12.71 15.25 17.79 20.33
x 211 1.9 111 9.25 3.47 4.05 4.63 5.20 5.78 6.36 6.94 7.52 8.09 9.25 11.56 13.88 16.19 18.50
x 199 1.64 121 10.08 3.78 4.41 5.04 5.67 6.30 6.93 7.56 8.19 8.82 10.08 12.60 15.13 17.65 20.17
x 183 1.66 110 9.17 3.44 4.01 4.58 5.16 5.73 6.30 6.88 7.45 8.02 9.17 11.46 13.75 16.04 18.33
x 174 1.42 122 10.17 3.81 4.45 5.08 5.72 6.35 6.99 7.63 8.26 8.90 10.17 12.71 15.25 17.79 20.33
x 167 1.53 109 9.08 3.41 3.97 4.54 5.11 5.68 6.24 6.81 7.38 7.95 9.08 11.35 13.63 15.90 18.17
x 149 1.37 109 9.08 3.41 3.97 4.54 5.11 5.68 6.24 6.81 7.38 7.95 9.08 11.35 13.63 15.90 18.17
W 36 x 848 6.32 134 11.17 4.19 4.89 5.58 6.28 6.98 7.68 8.38 9.07 9.77 11.17 13.96 16.75 19.54 22.33
x 798 6.09 131 10.92 4.09 4.78 5.46 6.14 6.82 7.51 8.19 8.87 9.55 10.92 13.65 16.38 19.10 21.83
x 650 5.08 128 10.67 4.00 4.67 5.33 6.00 6.67 7.33 8.00 8.67 9.33 10.67 13.33 16.00 18.67 21.33
x 527 4.22 125 10.42 3.91 4.56 5.21 5.86 6.51 7.16 7.81 8.46 9.11 10.42 13.02 15.63 18.23 20.83
x 439 3.57 123 10.25 3.84 4.48 5.13 5.77 6.41 7.05 7.69 8.33 8.97 10.25 12.81 15.38 17.94 20.50
x 393 3.25 121 10.08 3.78 4.41 5.04 5.67 6.30 6.93 7.56 8.19 8.82 10.08 12.60 15.13 17.65 20.17
x 359 2.97 121 10.08 3.78 4.41 5.04 5.67 6.30 6.93 7.56 8.19 8.82 10.08 12.60 15.13 17.65 20.17
x 328 2.73 120 10.00 3.75 4.38 5.00 5.63 6.25 6.88 7.50 8.13 8.75 10.00 12.50 15.00 17.50 20.00
x 300 2.5 120 10.00 3.75 4.38 5.00 5.63 6.25 6.88 7.50 8.13 8.75 10.00 12.50 15.00 17.50 20.00
x 280 2.35 119 9.92 3.72 4.34 4.96 5.58 6.20 6.82 7.44 8.06 8.68 9.92 12.40 14.88 17.35 19.83
x 260 2.18 119 9.92 3.72 4.34 4.96 5.58 6.20 6.82 7.44 8.06 8.68 9.92 12.40 14.88 17.35 19.83
x 256 2.37 108 9.00 3.38 3.94 4.50 5.06 5.63 6.19 6.75 7.31 7.88 9.00 11.25 13.50 15.75 18.00
x 245 2.08 118 9.83 3.69 4.30 4.92 5.53 6.15 6.76 7.38 7.99 8.60 9.83 12.29 14.75 17.21 19.67
x 232 2.15 108 9.00 3.38 3.94 4.50 5.06 5.63 6.19 6.75 7.31 7.88 9.00 11.25 13.50 15.75 18.00
x 230 1.95 118 9.83 3.69 4.30 4.92 5.53 6.15 6.76 7.38 7.99 8.60 9.83 12.29 14.75 17.21 19.67
x 210 1.96 107 8.92 3.34 3.90 4.46 5.02 5.57 6.13 6.69 7.24 7.80 8.92 11.15 13.38 15.60 17.83
x 194 1.81 107 8.92 3.34 3.90 4.46 5.02 5.57 6.13 6.69 7.24 7.80 8.92 11.15 13.38 15.60 17.83
x 182 1.72 106 8.83 3.31 3.86 4.42 4.97 5.52 6.07 6.63 7.18 7.73 8.83 11.04 13.25 15.46 17.67
x 170 1.6 106 8.83 3.31 3.86 4.42 4.97 5.52 6.07 6.63 7.18 7.73 8.83 11.04 13.25 15.46 17.67
x 160 1.51 106 8.83 3.31 3.86 4.42 4.97 5.52 6.07 6.63 7.18 7.73 8.83 11.04 13.25 15.46 17.67
x 150 1.43 105 8.75 3.28 3.83 4.38 4.92 5.47 6.02 6.56 7.11 7.66 8.75 10.94 13.13 15.31 17.50
x 135 1.29 105 8.75 3.28 3.83 4.38 4.92 5.47 6.02 6.56 7.11 7.66 8.75 10.94 13.13 15.31 17.50
W 33 x 387 3.31 117 9.75 3.66 4.27 4.88 5.48 6.09 6.70 7.31 7.92 8.53 9.75 12.19 14.63 17.06 19.50
x 354 3.05 116 9.67 3.63 4.23 4.83 5.44 6.04 6.65 7.25 7.85 8.46 9.67 12.08 14.50 16.92 19.33
x 318 2.77 115 9.58 3.59 4.19 4.79 5.39 5.99 6.59 7.19 7.79 8.39 9.58 11.98 14.38 16.77 19.17
W33 x 291 2.55 114 9.50 3.56 4.16 4.75 5.34 5.94 6.53 7.13 7.72 8.31 9.50 11.88 14.25 16.63 19.00
x 263 2.33 113 9.42 3.53 4.12 4.71 5.30 5.89 6.47 7.06 7.65 8.24 9.42 11.77 14.13 16.48 18.83
x 241 2.13 113 9.42 3.53 4.12 4.71 5.30 5.89 6.47 7.06 7.65 8.24 9.42 11.77 14.13 16.48 18.83
x 221 1.97 112 9.33 3.50 4.08 4.67 5.25 5.83 6.42 7.00 7.58 8.17 9.33 11.67 14.00 16.33 18.67
x 201 1.79 112 9.33 3.50 4.08 4.67 5.25 5.83 6.42 7.00 7.58 8.17 9.33 11.67 14.00 16.33 18.67
x 169 1.7 99.6 8.30 3.11 3.63 4.15 4.67 5.19 5.71 6.23 6.74 7.26 8.30 10.38 12.45 14.53 16.60
x 152 1.53 99.3 8.28 3.10 3.62 4.14 4.65 5.17 5.69 6.21 6.72 7.24 8.28 10.34 12.41 14.48 16.55
x 141 1.43 98.4 8.20 3.08 3.59 4.10 4.61 5.13 5.64 6.15 6.66 7.18 8.20 10.25 12.30 14.35 16.40
x 130 1.32 98.3 8.19 3.07 3.58 4.10 4.61 5.12 5.63 6.14 6.66 7.17 8.19 10.24 12.29 14.34 16.38
x 118 1.21 97.8 8.15 3.06 3.57 4.08 4.58 5.09 5.60 6.11 6.62 7.13 8.15 10.19 12.23 14.26 16.30
W 30 x 477 4.23 112 9.33 3.50 4.08 4.67 5.25 5.83 6.42 7.00 7.58 8.17 9.33 11.67 14.00 16.33 18.67
x 391 3.59 109 9.08 3.41 3.97 4.54 5.11 5.68 6.24 6.81 7.38 7.95 9.08 11.35 13.63 15.90 18.17
x 357 3.31 108 9.00 3.38 3.94 4.50 5.06 5.63 6.19 6.75 7.31 7.88 9.00 11.25 13.50 15.75 18.00
x 326 3.05 107 8.92 3.34 3.90 4.46 5.02 5.57 6.13 6.69 7.24 7.80 8.92 11.15 13.38 15.60 17.83
x 292 2.73 107 8.92 3.34 3.90 4.46 5.02 5.57 6.13 6.69 7.24 7.80 8.92 11.15 13.38 15.60 17.83
x 261 2.46 106 8.83 3.31 3.86 4.42 4.97 5.52 6.07 6.63 7.18 7.73 8.83 11.04 13.25 15.46 17.67
x 235 2.24 105 8.75 3.28 3.83 4.38 4.92 5.47 6.02 6.56 7.11 7.66 8.75 10.94 13.13 15.31 17.50
x 211 2.01 105 8.75 3.28 3.83 4.38 4.92 5.47 6.02 6.56 7.11 7.66 8.75 10.94 13.13 15.31 17.50
x 191 1.85 103 8.58 3.22 3.76 4.29 4.83 5.36 5.90 6.44 6.97 7.51 8.58 10.73 12.88 15.02 17.17
x 173 1.66 104 8.67 3.25 3.79 4.33 4.88 5.42 5.96 6.50 7.04 7.58 8.67 10.83 13.00 15.17 17.33
x 148 1.64 90.3 7.53 2.82 3.29 3.76 4.23 4.70 5.17 5.64 6.11 6.58 7.53 9.41 11.29 13.17 15.05
x 132 1.47 89.5 7.46 2.80 3.26 3.73 4.20 4.66 5.13 5.59 6.06 6.53 7.46 9.32 11.19 13.05 14.92
x 124 1.39 89.3 7.44 2.79 3.26 3.72 4.19 4.65 5.12 5.58 6.05 6.51 7.44 9.30 11.16 13.02 14.88
x 116 1.3 89.1 7.43 2.78 3.25 3.71 4.18 4.64 5.10 5.57 6.03 6.50 7.43 9.28 11.14 12.99 14.85
x 108 1.21 88.9 7.41 2.78 3.24 3.70 4.17 4.63 5.09 5.56 6.02 6.48 7.41 9.26 11.11 12.96 14.82
x 99 1.12 88.5 7.38 2.77 3.23 3.69 4.15 4.61 5.07 5.53 5.99 6.45 7.38 9.22 11.06 12.91 14.75
x 90 1.02 88 7.33 2.75 3.21 3.67 4.13 4.58 5.04 5.50 5.96 6.42 7.33 9.17 11.00 12.83 14.67
W 27 x 539 5.08 106 8.83 3.31 3.86 4.42 4.97 5.52 6.07 6.63 7.18 7.73 8.83 11.04 13.25 15.46 17.67
x 448 4.29 104 8.67 3.25 3.79 4.33 4.88 5.42 5.96 6.50 7.04 7.58 8.67 10.83 13.00 15.17 17.33
x 368 3.64 101 8.42 3.16 3.68 4.21 4.73 5.26 5.79 6.31 6.84 7.36 8.42 10.52 12.63 14.73 16.83
x 336 3.33 100 8.33 3.13 3.65 4.17 4.69 5.21 5.73 6.25 6.77 7.29 8.33 10.42 12.50 14.58 16.67
x 307 3.11 98.8 8.23 3.09 3.60 4.12 4.63 5.15 5.66 6.18 6.69 7.20 8.23 10.29 12.35 14.41 16.47
x 281 2.86 98.2 8.18 3.07 3.58 4.09 4.60 5.11 5.63 6.14 6.65 7.16 8.18 10.23 12.28 14.32 16.37
x 258 2.64 97.7 8.14 3.05 3.56 4.07 4.58 5.09 5.60 6.11 6.62 7.12 8.14 10.18 12.21 14.25 16.28
x 235 2.43 96.6 8.05 3.02 3.52 4.03 4.53 5.03 5.53 6.04 6.54 7.04 8.05 10.06 12.08 14.09 16.10
x 217 2.26 96 8.00 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 8.00 10.00 12.00 14.00 16.00
x 194 2.03 95.6 7.97 2.99 3.49 3.98 4.48 4.98 5.48 5.98 6.47 6.97 7.97 9.96 11.95 13.94 15.93
x 178 1.87 95 7.92 2.97 3.46 3.96 4.45 4.95 5.44 5.94 6.43 6.93 7.92 9.90 11.88 13.85 15.83
x 161 1.7 94.6 7.88 2.96 3.45 3.94 4.43 4.93 5.42 5.91 6.41 6.90 7.88 9.85 11.83 13.80 15.77
x 146 1.55 94.3 7.86 2.95 3.44 3.93 4.42 4.91 5.40 5.89 6.38 6.88 7.86 9.82 11.79 13.75 15.72
W 24 x 129 1.56 82.8 6.90 2.59 3.02 3.45 3.88 4.31 4.74 5.18 5.61 6.04 6.90 8.63 10.35 12.08 13.80
x 114 1.39 82.3 6.86 2.57 3.00 3.43 3.86 4.29 4.72 5.14 5.57 6.00 6.86 8.57 10.29 12.00 13.72
x 102 1.24 82.1 6.84 2.57 2.99 3.42 3.85 4.28 4.70 5.13 5.56 5.99 6.84 8.55 10.26 11.97 13.68
x 94 1.15 81.5 6.79 2.55 2.97 3.40 3.82 4.24 4.67 5.09 5.52 5.94 6.79 8.49 10.19 11.89 13.58
x 84 1.03 81.2 6.77 2.54 2.96 3.38 3.81 4.23 4.65 5.08 5.50 5.92 6.77 8.46 10.15 11.84 13.53
x 492 5.04 97.7 8.14 3.05 3.56 4.07 4.58 5.09 5.60 6.11 6.62 7.12 8.14 10.18 12.21 14.25 16.28
x 408 4.29 95.1 7.93 2.97 3.47 3.96 4.46 4.95 5.45 5.94 6.44 6.93 7.93 9.91 11.89 13.87 15.85
x 370 3.98 92.9 7.74 2.90 3.39 3.87 4.35 4.84 5.32 5.81 6.29 6.77 7.74 9.68 11.61 13.55 15.48
x 335 3.66 91.5 7.63 2.86 3.34 3.81 4.29 4.77 5.24 5.72 6.20 6.67 7.63 9.53 11.44 13.34 15.25
x 306 3.37 90.8 7.57 2.84 3.31 3.78 4.26 4.73 5.20 5.68 6.15 6.62 7.57 9.46 11.35 13.24 15.13
x 279 3.11 89.7 7.48 2.80 3.27 3.74 4.20 4.67 5.14 5.61 6.07 6.54 7.48 9.34 11.21 13.08 14.95
x 250 2.81 89 7.42 2.78 3.24 3.71 4.17 4.64 5.10 5.56 6.03 6.49 7.42 9.27 11.13 12.98 14.83
x 229 2.6 88.1 7.34 2.75 3.21 3.67 4.13 4.59 5.05 5.51 5.97 6.42 7.34 9.18 11.01 12.85 14.68
x 207 2.36 87.6 7.30 2.74 3.19 3.65 4.11 4.56 5.02 5.48 5.93 6.39 7.30 9.13 10.95 12.78 14.60
W24 x 192 2.2 87.1 7.26 2.72 3.18 3.63 4.08 4.54 4.99 5.44 5.90 6.35 7.26 9.07 10.89 12.70 14.52
x 176 2.03 86.5 7.21 2.70 3.15 3.60 4.05 4.51 4.96 5.41 5.86 6.31 7.21 9.01 10.81 12.61 14.42
x 162 1.88 86.3 7.19 2.70 3.15 3.60 4.05 4.49 4.94 5.39 5.84 6.29 7.19 8.99 10.79 12.59 14.38
x 146 1.7 86.8 7.23 2.71 3.16 3.62 4.07 4.52 4.97 5.43 5.88 6.33 7.23 9.04 10.85 12.66 14.47
x 131 1.54 85.3 7.11 2.67 3.11 3.55 4.00 4.44 4.89 5.33 5.78 6.22 7.11 8.89 10.66 12.44 14.22
x 117 1.38 84.5 7.04 2.64 3.08 3.52 3.96 4.40 4.84 5.28 5.72 6.16 7.04 8.80 10.56 12.32 14.08
x 104 1.24 84.1 7.01 2.63 3.07 3.50 3.94 4.38 4.82 5.26 5.69 6.13 7.01 8.76 10.51 12.26 14.02
x 103 1.4 73.5 6.13 2.30 2.68 3.06 3.45 3.83 4.21 4.59 4.98 5.36 6.13 7.66 9.19 10.72 12.25
x 94 1.28 73.5 6.13 2.30 2.68 3.06 3.45 3.83 4.21 4.59 4.98 5.36 6.13 7.66 9.19 10.72 12.25
x 84 1.15 73.2 6.10 2.29 2.67 3.05 3.43 3.81 4.19 4.58 4.96 5.34 6.10 7.63 9.15 10.68 12.20
x 76 1.05 72.5 6.04 2.27 2.64 3.02 3.40 3.78 4.15 4.53 4.91 5.29 6.04 7.55 9.06 10.57 12.08
x 68 0.942 72.2 6.02 2.26 2.63 3.01 3.38 3.76 4.14 4.51 4.89 5.26 6.02 7.52 9.03 10.53 12.03
x 62 0.934 66.4 5.53 2.08 2.42 2.77 3.11 3.46 3.80 4.15 4.50 4.84 5.53 6.92 8.30 9.68 11.07
x 55 0.828 66.4 5.53 2.08 2.42 2.77 3.11 3.46 3.80 4.15 4.50 4.84 5.53 6.92 8.30 9.68 11.07
W 21 x 201 2.5 80.5 6.71 2.52 2.93 3.35 3.77 4.19 4.61 5.03 5.45 5.87 6.71 8.39 10.06 11.74 13.42
x 182 2.29 80 6.67 2.50 2.92 3.33 3.75 4.17 4.58 5.00 5.42 5.83 6.67 8.33 10.00 11.67 13.33
x 166 2.09 79.5 6.63 2.48 2.90 3.31 3.73 4.14 4.55 4.97 5.38 5.80 6.63 8.28 9.94 11.59 13.25
x 147 1.87 78.7 6.56 2.46 2.87 3.28 3.69 4.10 4.51 4.92 5.33 5.74 6.56 8.20 9.84 11.48 13.12
x 132 1.68 78.5 6.54 2.45 2.86 3.27 3.68 4.09 4.50 4.91 5.32 5.72 6.54 8.18 9.81 11.45 13.08
x 122 1.57 77.9 6.49 2.43 2.84 3.25 3.65 4.06 4.46 4.87 5.27 5.68 6.49 8.11 9.74 11.36 12.98
x 111 1.43 77.4 6.45 2.42 2.82 3.23 3.63 4.03 4.43 4.84 5.24 5.64 6.45 8.06 9.68 11.29 12.90
x 101 1.3 77.4 6.45 2.42 2.82 3.23 3.63 4.03 4.43 4.84 5.24 5.64 6.45 8.06 9.68 11.29 12.90
x 93 1.4 66.3 5.53 2.07 2.42 2.76 3.11 3.45 3.80 4.14 4.49 4.83 5.53 6.91 8.29 9.67 11.05
x 83 1.26 65.8 5.48 2.06 2.40 2.74 3.08 3.43 3.77 4.11 4.46 4.80 5.48 6.85 8.23 9.60 10.97
x 73 1.11 65.4 5.45 2.04 2.38 2.73 3.07 3.41 3.75 4.09 4.43 4.77 5.45 6.81 8.18 9.54 10.90
x 68 1.04 65.1 5.43 2.03 2.37 2.71 3.05 3.39 3.73 4.07 4.41 4.75 5.43 6.78 8.14 9.49 10.85
x 62 0.952 65.1 5.43 2.03 2.37 2.71 3.05 3.39 3.73 4.07 4.41 4.75 5.43 6.78 8.14 9.49 10.85
x 57 0.952 59.9 4.99 1.87 2.18 2.50 2.81 3.12 3.43 3.74 4.06 4.37 4.99 6.24 7.49 8.74 9.98
x 50 0.838 59.7 4.98 1.87 2.18 2.49 2.80 3.11 3.42 3.73 4.04 4.35 4.98 6.22 7.46 8.71 9.95
x 44 0.746 59 4.92 1.84 2.15 2.46 2.77 3.07 3.38 3.69 3.99 4.30 4.92 6.15 7.38 8.60 9.83
W 18 x 311 4.01 77.6 6.47 2.43 2.83 3.23 3.64 4.04 4.45 4.85 5.25 5.66 6.47 8.08 9.70 11.32 12.93
x 283 3.7 76.5 6.38 2.39 2.79 3.19 3.59 3.98 4.38 4.78 5.18 5.58 6.38 7.97 9.56 11.16 12.75
x 258 3.41 75.6 6.30 2.36 2.76 3.15 3.54 3.94 4.33 4.73 5.12 5.51 6.30 7.88 9.45 11.03 12.60
x 234 3.13 74.7 6.23 2.33 2.72 3.11 3.50 3.89 4.28 4.67 5.06 5.45 6.23 7.78 9.34 10.89 12.45
x 211 2.86 73.8 6.15 2.31 2.69 3.08 3.46 3.84 4.23 4.61 5.00 5.38 6.15 7.69 9.23 10.76 12.30
x 192 2.62 73.1 6.09 2.28 2.67 3.05 3.43 3.81 4.19 4.57 4.95 5.33 6.09 7.61 9.14 10.66 12.18
x 175 2.46 71.1 5.93 2.22 2.59 2.96 3.33 3.70 4.07 4.44 4.81 5.18 5.93 7.41 8.89 10.37 11.85
x 158 2.24 70.5 5.88 2.20 2.57 2.94 3.30 3.67 4.04 4.41 4.77 5.14 5.88 7.34 8.81 10.28 11.75
x 143 2.05 69.8 5.82 2.18 2.54 2.91 3.27 3.64 4.00 4.36 4.73 5.09 5.82 7.27 8.73 10.18 11.63
x 130 1.88 69.3 5.78 2.17 2.53 2.89 3.25 3.61 3.97 4.33 4.69 5.05 5.78 7.22 8.66 10.11 11.55
x 119 1.72 69.2 5.77 2.16 2.52 2.88 3.24 3.60 3.96 4.33 4.69 5.05 5.77 7.21 8.65 10.09 11.53
x 106 1.55 68.6 5.72 2.14 2.50 2.86 3.22 3.57 3.93 4.29 4.64 5.00 5.72 7.15 8.58 10.00 11.43
x 97 1.42 68.1 5.68 2.13 2.48 2.84 3.19 3.55 3.90 4.26 4.61 4.97 5.68 7.09 8.51 9.93 11.35
x 86 1.27 67.8 5.65 2.12 2.47 2.83 3.18 3.53 3.88 4.24 4.59 4.94 5.65 7.06 8.48 9.89 11.30
x 76 1.13 67.3 5.61 2.10 2.45 2.80 3.15 3.51 3.86 4.21 4.56 4.91 5.61 7.01 8.41 9.81 11.22
x 71 1.22 58 4.83 1.81 2.11 2.42 2.72 3.02 3.32 3.63 3.93 4.23 4.83 6.04 7.25 8.46 9.67
x 65 1.13 57.6 4.80 1.80 2.10 2.40 2.70 3.00 3.30 3.60 3.90 4.20 4.80 6.00 7.20 8.40 9.60
x 60 1.04 57.5 4.79 1.80 2.10 2.40 2.70 2.99 3.29 3.59 3.89 4.19 4.79 5.99 7.19 8.39 9.58
x 55 0.963 57.1 4.76 1.78 2.08 2.38 2.68 2.97 3.27 3.57 3.87 4.16 4.76 5.95 7.14 8.33 9.52
x 50 0.88 56.8 4.73 1.78 2.07 2.37 2.66 2.96 3.25 3.55 3.85 4.14 4.73 5.92 7.10 8.28 9.47
W 18 x 46 0.876 52.4 4.37 1.64 1.91 2.18 2.46 2.73 3.00 3.28 3.55 3.82 4.37 5.46 6.55 7.64 8.73
x 40 0.768 52.1 4.34 1.63 1.90 2.17 2.44 2.71 2.98 3.26 3.53 3.80 4.34 5.43 6.51 7.60 8.68
x 35 0.672 52.1 4.34 1.63 1.90 2.17 2.44 2.71 2.98 3.26 3.53 3.80 4.34 5.43 6.51 7.60 8.68
W 16 x 100 1.59 62.7 5.23 1.96 2.29 2.61 2.94 3.27 3.59 3.92 4.25 4.57 5.23 6.53 7.84 9.14 10.45
x 89 1.43 62.4 5.20 1.95 2.28 2.60 2.93 3.25 3.58 3.90 4.23 4.55 5.20 6.50 7.80 9.10 10.40
x 77 1.25 61.6 5.13 1.93 2.25 2.57 2.89 3.21 3.53 3.85 4.17 4.49 5.13 6.42 7.70 8.98 10.27
x 67 1.09 61.4 5.12 1.92 2.24 2.56 2.88 3.20 3.52 3.84 4.16 4.48 5.12 6.40 7.68 8.95 10.23
x 57 1.09 52.1 4.34 1.63 1.90 2.17 2.44 2.71 2.98 3.26 3.53 3.80 4.34 5.43 6.51 7.60 8.68
x 50 0.962 52 4.33 1.63 1.90 2.17 2.44 2.71 2.98 3.25 3.52 3.79 4.33 5.42 6.50 7.58 8.67
x 45 0.87 51.7 4.31 1.62 1.88 2.15 2.42 2.69 2.96 3.23 3.50 3.77 4.31 5.39 6.46 7.54 8.62
x 40 0.78 51.3 4.28 1.60 1.87 2.14 2.40 2.67 2.94 3.21 3.47 3.74 4.28 5.34 6.41 7.48 8.55
x 36 0.702 51.3 4.28 1.60 1.87 2.14 2.40 2.67 2.94 3.21 3.47 3.74 4.28 5.34 6.41 7.48 8.55
x 31 0.661 46.9 3.91 1.47 1.71 1.95 2.20 2.44 2.69 2.93 3.18 3.42 3.91 4.89 5.86 6.84 7.82
x 26 0.558 46.6 3.88 1.46 1.70 1.94 2.18 2.43 2.67 2.91 3.16 3.40 3.88 4.85 5.83 6.80 7.77
W 14 x 808 8.75 92.3 7.69 2.88 3.37 3.85 4.33 4.81 5.29 5.77 6.25 6.73 7.69 9.61 11.54 13.46 15.38
x 730 8.08 90.4 7.53 2.83 3.30 3.77 4.24 4.71 5.18 5.65 6.12 6.59 7.53 9.42 11.30 13.18 15.07
x 665 7.49 88.8 7.40 2.78 3.24 3.70 4.16 4.63 5.09 5.55 6.01 6.48 7.40 9.25 11.10 12.95 14.80
x 605 6.96 86.9 7.24 2.72 3.17 3.62 4.07 4.53 4.98 5.43 5.88 6.34 7.24 9.05 10.86 12.67 14.48
x 550 6.43 85.6 7.13 2.68 3.12 3.57 4.01 4.46 4.90 5.35 5.80 6.24 7.13 8.92 10.70 12.48 14.27
x 500 5.95 84 7.00 2.63 3.06 3.50 3.94 4.38 4.81 5.25 5.69 6.13 7.00 8.75 10.50 12.25 14.00
x 455 5.53 82.3 6.86 2.57 3.00 3.43 3.86 4.29 4.72 5.14 5.57 6.00 6.86 8.57 10.29 12.00 13.72
x 426 5.21 81.8 6.82 2.56 2.98 3.41 3.83 4.26 4.69 5.11 5.54 5.96 6.82 8.52 10.23 11.93 13.63
x 398 4.93 80.7 6.73 2.52 2.94 3.36 3.78 4.20 4.62 5.04 5.46 5.88 6.73 8.41 10.09 11.77 13.45
x 370 4.63 79.9 6.66 2.50 2.91 3.33 3.75 4.16 4.58 4.99 5.41 5.83 6.66 8.32 9.99 11.65 13.32
x 342 4.32 79.1 6.59 2.47 2.88 3.30 3.71 4.12 4.53 4.94 5.36 5.77 6.59 8.24 9.89 11.54 13.18
x 311 3.98 78.1 6.51 2.44 2.85 3.25 3.66 4.07 4.47 4.88 5.29 5.69 6.51 8.14 9.76 11.39 13.02
x 283 3.66 77.3 6.44 2.42 2.82 3.22 3.62 4.03 4.43 4.83 5.23 5.64 6.44 8.05 9.66 11.27 12.88
x 257 3.36 76.5 6.38 2.39 2.79 3.19 3.59 3.98 4.38 4.78 5.18 5.58 6.38 7.97 9.56 11.16 12.75
x 233 3.08 75.6 6.30 2.36 2.76 3.15 3.54 3.94 4.33 4.73 5.12 5.51 6.30 7.88 9.45 11.03 12.60
x 211 2.81 75.2 6.27 2.35 2.74 3.13 3.53 3.92 4.31 4.70 5.09 5.48 6.27 7.83 9.40 10.97 12.53
x 193 2.6 74.3 6.19 2.32 2.71 3.10 3.48 3.87 4.26 4.64 5.03 5.42 6.19 7.74 9.29 10.84 12.38
x 176 2.38 74.1 6.18 2.32 2.70 3.09 3.47 3.86 4.25 4.63 5.02 5.40 6.18 7.72 9.26 10.81 12.35
x 159 2.16 73.5 6.13 2.30 2.68 3.06 3.45 3.83 4.21 4.59 4.98 5.36 6.13 7.66 9.19 10.72 12.25
x 145 1.99 72.7 6.06 2.27 2.65 3.03 3.41 3.79 4.17 4.54 4.92 5.30 6.06 7.57 9.09 10.60 12.12
x 132 1.89 70 5.83 2.19 2.55 2.92 3.28 3.65 4.01 4.38 4.74 5.10 5.83 7.29 8.75 10.21 11.67
x 120 1.71 70.1 5.84 2.19 2.56 2.92 3.29 3.65 4.02 4.38 4.75 5.11 5.84 7.30 8.76 10.22 11.68
x 109 1.57 69.6 5.80 2.18 2.54 2.90 3.26 3.63 3.99 4.35 4.71 5.08 5.80 7.25 8.70 10.15 11.60
x 99 1.43 69.2 5.77 2.16 2.52 2.88 3.24 3.60 3.96 4.33 4.69 5.05 5.77 7.21 8.65 10.09 11.53
x 90 1.31 68.7 5.73 2.15 2.50 2.86 3.22 3.58 3.94 4.29 4.65 5.01 5.73 7.16 8.59 10.02 11.45
x 82 1.45 56.5 4.71 1.77 2.06 2.35 2.65 2.94 3.24 3.53 3.83 4.12 4.71 5.89 7.06 8.24 9.42
x 74 1.32 56.2 4.68 1.76 2.05 2.34 2.63 2.93 3.22 3.51 3.81 4.10 4.68 5.85 7.03 8.20 9.37
x 68 1.22 55.7 4.64 1.74 2.03 2.32 2.61 2.90 3.19 3.48 3.77 4.06 4.64 5.80 6.96 8.12 9.28
x 61 1.1 55.7 4.64 1.74 2.03 2.32 2.61 2.90 3.19 3.48 3.77 4.06 4.64 5.80 6.96 8.12 9.28
x 53 1.06 49.8 4.15 1.56 1.82 2.08 2.33 2.59 2.85 3.11 3.37 3.63 4.15 5.19 6.23 7.26 8.30
x 48 0.97 49.5 4.13 1.55 1.80 2.06 2.32 2.58 2.84 3.09 3.35 3.61 4.13 5.16 6.19 7.22 8.25
x 43 0.874 49.2 4.10 1.54 1.79 2.05 2.31 2.56 2.82 3.08 3.33 3.59 4.10 5.13 6.15 7.18 8.20
x 38 0.809 47 3.92 1.47 1.71 1.96 2.20 2.45 2.69 2.94 3.18 3.43 3.92 4.90 5.88 6.85 7.83
x 34 0.725 46.9 3.91 1.47 1.71 1.95 2.20 2.44 2.69 2.93 3.18 3.42 3.91 4.89 5.86 6.84 7.82
x 30 0.644 46.6 3.88 1.46 1.70 1.94 2.18 2.43 2.67 2.91 3.16 3.40 3.88 4.85 5.83 6.80 7.77
x 26 0.628 41.4 3.45 1.29 1.51 1.73 1.94 2.16 2.37 2.59 2.80 3.02 3.45 4.31 5.18 6.04 6.90
x 22 0.534 41.2 3.43 1.29 1.50 1.72 1.93 2.15 2.36 2.58 2.79 3.00 3.43 4.29 5.15 6.01 6.87
W 12 x 336 4.85 69.3 5.78 2.17 2.53 2.89 3.25 3.61 3.97 4.33 4.69 5.05 5.78 7.22 8.66 10.11 11.55
W 12 x 305 4.49 67.9 5.66 2.12 2.48 2.83 3.18 3.54 3.89 4.24 4.60 4.95 5.66 7.07 8.49 9.90 11.32
x 279 4.19 66.6 5.55 2.08 2.43 2.78 3.12 3.47 3.82 4.16 4.51 4.86 5.55 6.94 8.33 9.71 11.10
x 252 3.84 65.7 5.48 2.05 2.40 2.74 3.08 3.42 3.76 4.11 4.45 4.79 5.48 6.84 8.21 9.58 10.95
x 230 3.55 64.7 5.39 2.02 2.36 2.70 3.03 3.37 3.71 4.04 4.38 4.72 5.39 6.74 8.09 9.44 10.78
x 210 3.27 64.2 5.35 2.01 2.34 2.68 3.01 3.34 3.68 4.01 4.35 4.68 5.35 6.69 8.03 9.36 10.70
x 190 3 63.4 5.28 1.98 2.31 2.64 2.97 3.30 3.63 3.96 4.29 4.62 5.28 6.60 7.93 9.25 10.57
x 170 2.72 62.6 5.22 1.96 2.28 2.61 2.93 3.26 3.59 3.91 4.24 4.56 5.22 6.52 7.83 9.13 10.43
x 152 2.45 62.1 5.18 1.94 2.26 2.59 2.91 3.23 3.56 3.88 4.20 4.53 5.18 6.47 7.76 9.06 10.35
x 136 2.23 60.9 5.08 1.90 2.22 2.54 2.85 3.17 3.49 3.81 4.12 4.44 5.08 6.34 7.61 8.88 10.15
x 120 1.99 60.4 5.03 1.89 2.20 2.52 2.83 3.15 3.46 3.78 4.09 4.40 5.03 6.29 7.55 8.81 10.07
x 106 1.77 59.9 4.99 1.87 2.18 2.50 2.81 3.12 3.43 3.74 4.06 4.37 4.99 6.24 7.49 8.74 9.98
x 96 1.61 59.7 4.98 1.87 2.18 2.49 2.80 3.11 3.42 3.73 4.04 4.35 4.98 6.22 7.46 8.71 9.95
x 87 1.47 59.1 4.93 1.85 2.15 2.46 2.77 3.08 3.39 3.69 4.00 4.31 4.93 6.16 7.39 8.62 9.85
x 79 1.34 58.8 4.90 1.84 2.14 2.45 2.76 3.06 3.37 3.68 3.98 4.29 4.90 6.13 7.35 8.58 9.80
x 72 1.23 58.3 4.86 1.82 2.13 2.43 2.73 3.04 3.34 3.64 3.95 4.25 4.86 6.07 7.29 8.50 9.72
x 65 1.11 58.3 4.86 1.82 2.13 2.43 2.73 3.04 3.34 3.64 3.95 4.25 4.86 6.07 7.29 8.50 9.72
x 58 1.1 52.7 4.39 1.65 1.92 2.20 2.47 2.74 3.02 3.29 3.57 3.84 4.39 5.49 6.59 7.69 8.78
x 53 1.02 52 4.33 1.63 1.90 2.17 2.44 2.71 2.98 3.25 3.52 3.79 4.33 5.42 6.50 7.58 8.67
x 50 1.06 47 3.92 1.47 1.71 1.96 2.20 2.45 2.69 2.94 3.18 3.43 3.92 4.90 5.88 6.85 7.83
x 45 0.974 46.2 3.85 1.44 1.68 1.93 2.17 2.41 2.65 2.89 3.13 3.37 3.85 4.81 5.78 6.74 7.70
x 40 0.86 46.5 3.88 1.45 1.70 1.94 2.18 2.42 2.66 2.91 3.15 3.39 3.88 4.84 5.81 6.78 7.75
x 35 0.81 43.2 3.60 1.35 1.58 1.80 2.03 2.25 2.48 2.70 2.93 3.15 3.60 4.50 5.40 6.30 7.20
x 30 0.699 42.9 3.58 1.34 1.56 1.79 2.01 2.23 2.46 2.68 2.90 3.13 3.58 4.47 5.36 6.26 7.15
x 26 0.612 42.5 3.54 1.33 1.55 1.77 1.99 2.21 2.43 2.66 2.88 3.10 3.54 4.43 5.31 6.20 7.08
x 22 0.623 35.3 2.94 1.10 1.29 1.47 1.65 1.84 2.02 2.21 2.39 2.57 2.94 3.68 4.41 5.15 5.88
x 19 0.54 35.2 2.93 1.10 1.28 1.47 1.65 1.83 2.02 2.20 2.38 2.57 2.93 3.67 4.40 5.13 5.87
x 16 0.457 35 2.92 1.09 1.28 1.46 1.64 1.82 2.01 2.19 2.37 2.55 2.92 3.65 4.38 5.10 5.83
x 14 0.405 34.6 2.88 1.08 1.26 1.44 1.62 1.80 1.98 2.16 2.34 2.52 2.88 3.60 4.33 5.05 5.77
W 10 x 112 2.17 51.5 4.29 1.61 1.88 2.15 2.41 2.68 2.95 3.22 3.49 3.76 4.29 5.36 6.44 7.51 8.58
x 100 1.97 50.7 4.23 1.58 1.85 2.11 2.38 2.64 2.90 3.17 3.43 3.70 4.23 5.28 6.34 7.39 8.45
x 88 1.74 50.5 4.21 1.58 1.84 2.10 2.37 2.63 2.89 3.16 3.42 3.68 4.21 5.26 6.31 7.36 8.42
x 77 1.54 49.9 4.16 1.56 1.82 2.08 2.34 2.60 2.86 3.12 3.38 3.64 4.16 5.20 6.24 7.28 8.32
x 68 1.38 49.1 4.09 1.53 1.79 2.05 2.30 2.56 2.81 3.07 3.32 3.58 4.09 5.11 6.14 7.16 8.18
x 60 1.22 49.1 4.09 1.53 1.79 2.05 2.30 2.56 2.81 3.07 3.32 3.58 4.09 5.11 6.14 7.16 8.18
x 54 1.11 48.6 4.05 1.52 1.77 2.03 2.28 2.53 2.78 3.04 3.29 3.54 4.05 5.06 6.08 7.09 8.10
x 49 1.01 48.3 4.03 1.51 1.76 2.01 2.26 2.52 2.77 3.02 3.27 3.52 4.03 5.03 6.04 7.04 8.05
x 45 1.06 42.6 3.55 1.33 1.55 1.78 2.00 2.22 2.44 2.66 2.88 3.11 3.55 4.44 5.33 6.21 7.10
x 39 0.929 42 3.50 1.31 1.53 1.75 1.97 2.19 2.41 2.63 2.84 3.06 3.50 4.38 5.25 6.13 7.00
x 33 0.786 42 3.50 1.31 1.53 1.75 1.97 2.19 2.41 2.63 2.84 3.06 3.50 4.38 5.25 6.13 7.00
x 30 0.809 37.1 3.09 1.16 1.35 1.55 1.74 1.93 2.13 2.32 2.51 2.71 3.09 3.86 4.64 5.41 6.18
x 26 0.708 36.7 3.06 1.15 1.34 1.53 1.72 1.91 2.10 2.29 2.48 2.68 3.06 3.82 4.59 5.35 6.12
x 22 0.606 36.3 3.03 1.13 1.32 1.51 1.70 1.89 2.08 2.27 2.46 2.65 3.03 3.78 4.54 5.29 6.05
x 19 0.607 31.3 2.61 0.98 1.14 1.30 1.47 1.63 1.79 1.96 2.12 2.28 2.61 3.26 3.91 4.56 5.22
x 17 0.543 31.3 2.61 0.98 1.14 1.30 1.47 1.63 1.79 1.96 2.12 2.28 2.61 3.26 3.91 4.56 5.22
x 15 0.484 31 2.58 0.97 1.13 1.29 1.45 1.61 1.78 1.94 2.10 2.26 2.58 3.23 3.88 4.52 5.17
x 12 0.392 30.6 2.55 0.96 1.12 1.28 1.43 1.59 1.75 1.91 2.07 2.23 2.55 3.19 3.83 4.46 5.10
W 8 x 67 1.65 40.7 3.39 1.27 1.48 1.70 1.91 2.12 2.33 2.54 2.76 2.97 3.39 4.24 5.09 5.94 6.78
x 58 1.44 40.2 3.35 1.26 1.47 1.68 1.88 2.09 2.30 2.51 2.72 2.93 3.35 4.19 5.03 5.86 6.70
x 48 1.21 39.7 3.31 1.24 1.45 1.65 1.86 2.07 2.27 2.48 2.69 2.89 3.31 4.14 4.96 5.79 6.62
x 40 1.03 39 3.25 1.22 1.42 1.63 1.83 2.03 2.23 2.44 2.64 2.84 3.25 4.06 4.88 5.69 6.50
x 35 0.907 38.6 3.22 1.21 1.41 1.61 1.81 2.01 2.21 2.41 2.61 2.81 3.22 4.02 4.83 5.63 6.43
x 31 0.803 38.6 3.22 1.21 1.41 1.61 1.81 2.01 2.21 2.41 2.61 2.81 3.22 4.02 4.83 5.63 6.43
W 8 x 28 0.819 34.2 2.85 1.07 1.25 1.43 1.60 1.78 1.96 2.14 2.32 2.49 2.85 3.56 4.28 4.99 5.70
x 24 0.704 34.1 2.84 1.07 1.24 1.42 1.60 1.78 1.95 2.13 2.31 2.49 2.84 3.55 4.26 4.97 5.68
x 21 0.675 31.1 2.59 0.97 1.13 1.30 1.46 1.62 1.78 1.94 2.11 2.27 2.59 3.24 3.89 4.54 5.18
x 18 0.583 30.9 2.58 0.97 1.13 1.29 1.45 1.61 1.77 1.93 2.09 2.25 2.58 3.22 3.86 4.51 5.15
x 15 0.551 27.2 2.27 0.85 0.99 1.13 1.28 1.42 1.56 1.70 1.84 1.98 2.27 2.83 3.40 3.97 4.53
x 13 0.483 26.9 2.24 0.84 0.98 1.12 1.26 1.40 1.54 1.68 1.82 1.96 2.24 2.80 3.36 3.92 4.48
x 10 0.375 26.7 2.23 0.83 0.97 1.11 1.25 1.39 1.53 1.67 1.81 1.95 2.23 2.78 3.34 3.89 4.45
W 6 x 25 0.839 29.8 2.48 0.93 1.09 1.24 1.40 1.55 1.71 1.86 2.02 2.17 2.48 3.10 3.73 4.35 4.97
x 20 0.678 29.5 2.46 0.92 1.08 1.23 1.38 1.54 1.69 1.84 2.00 2.15 2.46 3.07 3.69 4.30 4.92
x 16 0.684 23.4 1.95 0.73 0.85 0.98 1.10 1.22 1.34 1.46 1.58 1.71 1.95 2.44 2.93 3.41 3.90
x 15 0.521 28.8 2.40 0.90 1.05 1.20 1.35 1.50 1.65 1.80 1.95 2.10 2.40 3.00 3.60 4.20 4.80
x 12 0.526 22.8 1.90 0.71 0.83 0.95 1.07 1.19 1.31 1.43 1.54 1.66 1.90 2.38 2.85 3.33 3.80
x9 0.398 22.6 1.88 0.71 0.82 0.94 1.06 1.18 1.29 1.41 1.53 1.65 1.88 2.35 2.83 3.30 3.77
x 8.5 0.374 22.7 1.89 0.71 0.83 0.95 1.06 1.18 1.30 1.42 1.54 1.66 1.89 2.36 2.84 3.31 3.78
W 5 x 19 0.776 24.5 2.04 0.77 0.89 1.02 1.15 1.28 1.40 1.53 1.66 1.79 2.04 2.55 3.06 3.57 4.08
x 16 0.664 24.1 2.01 0.75 0.88 1.00 1.13 1.26 1.38 1.51 1.63 1.76 2.01 2.51 3.01 3.51 4.02
W 4 x 13 0.67 19.4 1.62 0.61 0.71 0.81 0.91 1.01 1.11 1.21 1.31 1.41 1.62 2.02 2.43 2.83 3.23
ESTIMATING MANUAL
APPENDIX C
DECK PROFILE AND FLUTE CHARTS

Deck Profile Charts
Flute Depth 1-1/2” 2” 3” Flute Depth 1-1/2” 2” 3”
Expansion 1.25 1.333 1.5 Expansion 1.375 1.5 1.75
Deck Profile: 1 flute/ft. Deck Profile: 1-1/2 flutes/ft.
Flute Depth 1-1/2” 2” 3” Flute Depth 1-1/2” Roof Deck
Expansion 1.50 1.667 2 Expansion 1.5
Deck Profile: 2 flutes/ft.

The aforementioned charts should be applicable for most common deck profiles. Multiply the sq.ft of deck by the appropriate factor to determine the total surface area of deck to be sprayed. October 2019
Flute Charts
Unless otherwise noted in the specific UL Fire Resistive Design, UL requires that the flutes above the beams be filled with the same protection
material used on the beams. The amount of material required for this can be substantial, especially with 3” decks.
1. Calculate the total linear footage of beams under each type of fluted deck (perpendicular).
2. The total linear footage should be multiplied by the bd.ft factor from the charts shown below. These charts are applicable for the most
common deck profiles.
Flute Depth Flute Depth Flute Depth
1-1/2” 2” 3” 1-1/2” 2” 3”
4 0.230 0.306 0.458 4 0.323 0.431 4 0.450
5 0.287 0.382 0.573 5 0.404 0.538 5 0.563

Beam Flange Width
Beam Flange Width
Beam Flange Width

6 0.344 0.458 0.688 6 0.484 0.646 6 0.675
7 0.400 0.535 0.802 7 0.565 0.754 7 0.788
8 0.458 0.611 0.917 8 0.646 0.861 8 0.900
9 0.516 0.688 1.032 9 0.727 0.969 9 1.013
10 0.573 0.764 1.146 10 0.807 1.076 10 1.130
Deck Profile: 1 flute/ft. Deck Profile: 2 flutes/ft. Deck Profile: 1-1/2 flute/ft. October 2019
ESTIMATING MANUAL
APPENDIX D
WORKSHEET TEMPLATES

ESTIMATING MANUAL
COLUMN WORKSHEET
Material Number of Column BD. FT/L. Total BD. FT
Item Column Size & W/D FRR Length (‘) Total Length FT Factor (Use
Thickness Columns Conversion Tables)
per Column
Sub-Total
Project Reference:
Date:
Revision:
Level/Floor:
Estimator:

ESTIMATING MANUAL
BEAM WORKSHEET
Material Number of Beam BD. FT/L. FT Total BD. FT
Item Beam Size & W/D FRR Length (‘) Total Length Factor (Use
Thickness Beams Conversion Tables)
per Beam
Sub-Total
Project Reference:
Date:
Revision:
Level/Floor:
Estimator:

ESTIMATING MANUAL
APPENDIX E
THICKNESS TABLES

Southwest Fireproofing Type 5 GP, 5 MD, 7 GP and 7 HD
Design No. D788 - Protected Deck Floor Assembly
Normal Weight & Light Weight Concrete
Minimum Thickness, in., Required on Beam
Restrained Assembly Rating
Member W/D 1 Hr 1.5 Hr 2 Hr 3 Hr 4 Hr
W4x13 0.65 0.42 0.42 0.42 0.63 1.82
W5x16 0.65 0.42 0.42 0.42 0.63 1.82
W5x19 0.76 0.39 0.39 0.39 0.58 1.67
W6x9 0.39 0.53 0.53 0.53 0.80 2.30
W6x12 0.51 0.47 0.47 0.47 0.71 2.05
W6x16 0.66 0.42 0.42 0.42 0.63 1.81
W6x20 0.67 0.41 0.41 0.41 0.62 1.79
W6x26 0.82 0.38 0.38 0.38 0.55 1.60
W8x10 0.37 0.54 0.54 0.54 0.81 2.35
W8x13 0.47 0.49 0.49 0.49 0.74 2.13
W8x15 0.54 0.46 0.46 0.46 0.69 2.00
W8x18 0.57 0.45 0.45 0.45 0.67 1.94
W8x21 0.66 0.42 0.42 0.42 0.63 1.81
W8x24 0.69 0.41 0.41 0.41 0.61 1.76
W8x28 0.80 0.38 0.38 0.38 0.56 1.63
W8x31 0.79 0.38 0.38 0.38 0.57 1.64
W8x35 0.88 0.38 0.38 0.38 0.53 1.54
W8x40 1.00 0.38 0.38 0.38 0.49 1.42
W8x48 1.18 0.38 0.38 0.38 0.44 1.28
W8x58 1.41 0.38 0.38 0.38 0.39 1.13
W8x67 1.61 0.38 0.38 0.38 0.38 1.03
W10x12 0.38 0.54 0.54 0.54 0.80 2.32
W10x15 0.48 0.49 0.49 0.49 0.73 2.11
W10x17 0.54 0.46 0.46 0.46 0.69 2.00
W10x19 0.59 0.44 0.44 0.44 0.66 1.91
W10x22 0.59 0.44 0.44 0.44 0.66 1.91
W10x26 0.69 0.41 0.41 0.41 0.61 1.76
W10x30 0.79 0.38 0.38 0.38 0.57 1.64
W10x33 0.77 0.38 0.38 0.38 0.57 1.66
W10x39 0.90 0.38 0.38 0.38 0.53 1.52
W10x46 1.03 0.38 0.38 0.38 0.48 1.40
W10x49 0.99 0.38 0.38 0.38 0.50 1.43
W10x54 1.09 0.38 0.38 0.38 0.47 1.35
W10x60 1.20 0.38 0.38 0.38 0.44 1.26
W10x68 1.36 0.38 0.38 0.38 0.40 1.16
W10x77 1.52 0.38 0.38 0.38 0.38 1.07
W10x88 1.72 0.38 0.38 0.38 0.38 0.98
W10x100 1.93 0.38 0.38 0.38 0.38 0.90
W10x112 2.14 0.38 0.38 0.38 0.38 0.83
W12x14 0.40 0.53 0.53 0.53 0.79 2.28
W12x16 0.45 0.50 0.50 0.50 0.75 2.17
W12x19 0.53 0.46 0.46 0.46 0.70 2.01
W12x22 0.61 0.43 0.43 0.43 0.65 1.88
W12x26 0.60 0.44 0.44 0.44 0.66 1.90
W12x30 0.69 0.41 0.41 0.41 0.61 1.76
W12x35 0.79 0.38 0.38 0.38 0.57 1.64
W12x40 0.85 0.38 0.38 0.38 0.54 1.57
W12x45 0.95 0.38 0.38 0.38 0.51 1.47
W12x50 1.04 0.38 0.38 0.38 0.48 1.39
W12x53 0.99 0.38 0.38 0.38 0.50 1.43
W12x54 1.04 0.38 0.38 0.38 0.48 1.39
W12x58 1.08 0.38 0.38 0.38 0.47 1.35
W12x65 1.09 0.38 0.38 0.38 0.47 1.35
W12x72 1.20 0.38 0.38 0.38 0.44 1.26
W12x79 1.32 0.38 0.38 0.38 0.41 1.18
W12x87 1.44 0.38 0.38 0.38 0.39 1.12
W12x96 1.57 0.38 0.38 0.38 0.38 1.05
W12x106 1.73 0.38 0.38 0.38 0.38 0.98
W12x120 1.94 0.38 0.38 0.38 0.38 0.90
W12x136 2.17 0.38 0.38 0.38 0.38 0.82
W12x152 2.40 0.38 0.38 0.38 0.38 0.76
W12x170 2.66 0.38 0.38 0.38 0.38 0.70
W12x190 2.93 0.38 0.38 0.38 0.38 0.64
W12x210 3.21 0.38 0.38 0.38 0.38 0.60
W12x230 3.47 0.38 0.38 0.38 0.38 0.56
W12x262 3.76 0.38 0.38 0.38 0.38 0.52
W12x279 4.10 0.38 0.38 0.38 0.38 0.48
W12x305 4.41 0.38 0.38 0.38 0.38 0.45
W12x336 4.78 0.38 0.38 0.38 0.38 0.42
W14x22 0.52 0.47 0.47 0.47 0.70 2.03
W14x26 0.61 0.43 0.43 0.43 0.65 1.88
W14x30 0.63 0.43 0.43 0.43 0.64 1.85
W14x34 0.71 0.40 0.40 0.40 0.60 1.74
W14x38 0.79 0.38 0.38 0.38 0.57 1.64
W14x43 0.85 0.38 0.38 0.38 0.54 1.57
W14x48 0.94 0.38 0.38 0.38 0.51 1.48
W14x53 1.03 0.38 0.38 0.38 0.48 1.40
W14x61 1.07 0.38 0.38 0.38 0.47 1.36
W14x68 1.19 0.38 0.38 0.38 0.44 1.27
W14x74 1.28 0.38 0.38 0.38 0.42 1.21
W14x82 1.41 0.38 0.38 0.38 0.39 1.13
W14x90 1.27 0.38 0.38 0.38 0.42 1.22
W14x99 1.39 0.38 0.38 0.38 0.40 1.14
W14x109 1.53 0.38 0.38 0.38 0.38 1.07
W14x120 1.67 0.38 0.38 0.38 0.38 1.00
W14x132 1.83 0.38 0.38 0.38 0.38 0.94
W14x145 1.94 0.38 0.38 0.38 0.38 0.90
W14x159 2.11 0.38 0.38 0.38 0.38 0.84
W14x176 2.25 0.38 0.38 0.38 0.38 0.80
W14x193 2.32 0.38 0.38 0.38 0.38 0.78
W14x211 2.74 0.38 0.38 0.38 0.38 0.68
W14x233 3.00 0.38 0.38 0.38 0.38 0.63
W14x257 3.27 0.38 0.38 0.38 0.38 0.59
W14x283 3.57 0.38 0.38 0.38 0.38 0.55
W14x311 3.88 0.38 0.38 0.38 0.38 0.51
W14x342 4.21 0.38 0.38 0.38 0.38 0.47
W14x370 4.51 0.38 0.38 0.38 0.38 0.45
W14x398 4.80 0.38 0.38 0.38 0.38 0.42
W14x426 5.09 0.38 0.38 0.38 0.38 0.40
W14x455 5.38 0.38 0.38 0.38 0.38 0.38
W14x500 5.82 0.38 0.38 0.38 0.38 0.38
W14x550 6.30 0.38 0.38 0.38 0.38 0.38
W14x605 6.80 0.38 0.38 0.38 0.38 0.38
W16x26 0.55 0.46 0.46 0.46 0.68 1.98
W16x31 0.65 0.42 0.42 0.42 0.63 1.82
W16x36 0.69 0.41 0.41 0.41 0.61 1.76
W16x40 0.76 0.39 0.39 0.39 0.58 1.67
W16x45 0.85 0.38 0.38 0.38 0.54 1.57
W16x50 0.94 0.38 0.38 0.38 0.51 1.48
W16x67 1.07 0.38 0.38 0.38 0.47 1.36
W16x77 1.07 0.38 0.38 0.38 0.47 1.36
W16x89 1.22 0.38 0.38 0.38 0.43 1.25
W16x100 1.56 0.38 0.38 0.38 0.38 1.05
W18x35 0.66 0.42 0.42 0.42 0.63 1.81
W18x40 0.76 0.39 0.39 0.39 0.58 1.67
W18x46 0.86 0.38 0.38 0.38 0.54 1.56
W18x50 0.87 0.38 0.38 0.38 0.54 1.55
W18x55 0.95 0.38 0.38 0.38 0.51 1.47
W18x60 1.03 0.38 0.38 0.38 0.48 1.40
W18x65 1.11 0.38 0.38 0.38 0.46 1.33
W18x71 1.21 0.38 0.38 0.38 0.44 1.26
W18x76 1.11 0.38 0.38 0.38 0.46 1.33
W18x88 1.24 0.38 0.38 0.38 0.43 1.24
W18x97 1.39 0.38 0.38 0.38 0.40 1.14
W18x106 1.52 0.38 0.38 0.38 0.38 1.07
W18x119 1.68 0.38 0.38 0.38 0.38 1.00
W21x44 0.73 0.39 0.39 0.39 0.59 1.71
W21x50 0.83 0.38 0.38 0.38 0.55 1.59
W21x57 0.93 0.38 0.38 0.38 0.51 1.49
W21x62 0.94 0.38 0.38 0.38 0.51 1.48
W21x68 1.03 0.38 0.38 0.38 0.48 1.40
W21x83 1.24 0.38 0.38 0.38 0.43 1.24
1 Hr 1.5 Hr 2 Hr 3 Hr 4 Hr
W21x93 1.38 0.38 0.38 0.38 0.40 1.15
W21x101 1.29 0.38 0.38 0.38 0.42 1.20
W21x111 1.41 0.38 0.38 0.38 0.39 1.13
W21x122 1.54 0.38 0.38 0.38 0.38 1.06
W21x132 1.66 0.38 0.38 0.38 0.38 1.01
W21x147 1.83 0.38 0.38 0.38 0.38 0.94
W24x55 0.82 0.38 0.38 0.38 0.55 1.60
W24x62 0.92 0.38 0.38 0.38 0.52 1.50
W24x68 0.93 0.38 0.38 0.38 0.51 1.49
W24x76 1.02 0.38 0.38 0.38 0.49 1.40
W24x84 1.13 0.38 0.38 0.38 0.46 1.32
W24x94 1.26 0.38 0.38 0.38 0.42 1.22
W24x104 1.22 0.38 0.38 0.38 0.43 1.25
W24x117 1.36 0.38 0.38 0.38 0.40 1.16
W24x131 1.52 0.38 0.38 0.38 0.38 1.07
W24x146 1.68 0.38 0.38 0.38 0.38 1.00
W24x162 1.85 0.38 0.38 0.38 0.38 0.93
W27x84 1.02 0.38 0.38 0.38 0.49 1.40
W27x94 1.13 0.38 0.38 0.38 0.46 1.32
W27x102 1.23 0.38 0.38 0.38 0.43 1.24
W27x114 1.36 0.38 0.38 0.38 0.40 1.16
W27x146 1.53 0.38 0.38 0.38 0.38 1.07
W27x161 1.68 0.38 0.38 0.38 0.38 1.00
W27x178 1.85 0.38 0.38 0.38 0.38 0.93
W30x99 1.10 0.38 0.38 0.38 0.46 1.34
W30x108 1.20 0.38 0.38 0.38 0.44 1.26
W30x116 1.28 0.38 0.38 0.38 0.42 1.21
W30x124 1.37 0.38 0.38 0.38 0.40 1.15
W30x132 1.46 0.38 0.38 0.38 0.38 1.10
W30x173 1.66 0.38 0.38 0.38 0.38 1.01
W30x191 1.82 0.38 0.38 0.38 0.38 0.94
W30x211 2.00 0.38 0.38 0.38 0.38 0.88
W33x118 1.19 0.38 0.38 0.38 0.44 1.27
W33x130 1.31 0.38 0.38 0.38 0.41 1.19
W33x141 1.41 0.38 0.38 0.38 0.39 1.13
W33x152 1.51 0.38 0.38 0.38 0.38 1.08
W33x201 1.78 0.38 0.38 0.38 0.38 0.96
These beam protection thicknesses have been calculated for the convenience of users, in accordance with
"6. Adjustment of Thickness of Spray-applied Fire Resistive Materials for Restrained and Unrestrained
Beams", as detailed in the UL FireResistance Directory. While we have taken care
to be as accurate as possible, we will not be held responsible for errors or omissions. If any discrepancy is
found between these tables and the UL Design information, the UL Design information shall govern.
Unrestrained Beam Rating
W4x13 0.65 0.42 0.63 0.91 1.40 1.82
W5x16 0.65 0.42 0.63 0.91 1.40 1.82
W5x19 0.76 0.39 0.58 0.84 1.29 1.67
W6x9 0.39 0.53 0.80 1.15 1.77 2.30
W6x12 0.51 0.47 0.71 1.02 1.58 2.05
W6x16 0.66 0.42 0.63 0.90 1.39 1.81
W6x20 0.67 0.41 0.62 0.90 1.38 1.79
W6x26 0.82 0.38 0.55 0.80 1.23 1.60
W8x10 0.37 0.54 0.81 1.17 1.80 2.35
W8x13 0.47 0.49 0.74 1.06 1.64 2.13
W8x15 0.54 0.46 0.69 1.00 1.54 2.00
W8x18 0.57 0.45 0.67 0.97 1.50 1.94
W8x21 0.66 0.42 0.63 0.90 1.39 1.81
W8x24 0.69 0.41 0.61 0.88 1.36 1.76
W8x28 0.80 0.38 0.56 0.81 1.25 1.63
W8x31 0.79 0.38 0.57 0.82 1.26 1.64
W8x35 0.88 0.38 0.53 0.77 1.18 1.54
W8x40 1.00 0.38 0.49 0.71 1.09 1.42
W8x48 1.18 0.38 0.44 0.64 0.98 1.28
W8x58 1.41 0.38 0.39 0.57 0.87 1.13
W8x67 1.61 0.38 0.38 0.51 0.79 1.03
W10x12 0.38 0.54 0.80 1.16 1.79 2.32
W10x15 0.48 0.49 0.73 1.05 1.62 2.11
W10x17 0.54 0.46 0.69 1.00 1.54 2.00
W10x19 0.59 0.44 0.66 0.96 1.47 1.91
W10x22 0.59 0.44 0.66 0.96 1.47 1.91
W10x26 0.69 0.41 0.61 0.88 1.36 1.76
W10x30 0.79 0.38 0.57 0.82 1.26 1.64
W10x33 0.77 0.38 0.57 0.83 1.28 1.66
W10x39 0.90 0.38 0.53 0.76 1.17 1.52
W10x46 1.03 0.38 0.48 0.70 1.07 1.40
W10x49 0.99 0.38 0.50 0.72 1.10 1.43
W10x54 1.09 0.38 0.47 0.67 1.04 1.35
W10x60 1.20 0.38 0.44 0.63 0.97 1.26
W10x68 1.36 0.38 0.40 0.58 0.89 1.16
W10x77 1.52 0.38 0.38 0.54 0.83 1.07
W10x88 1.72 0.38 0.38 0.49 0.75 0.98
W10x100 1.93 0.38 0.38 0.45 0.69 0.90
W10x112 2.14 0.38 0.38 0.42 0.64 0.83
W12x14 0.40 0.53 0.79 1.14 1.75 2.28
W12x16 0.45 0.50 0.75 1.08 1.67 2.17
W12x19 0.53 0.46 0.70 1.01 1.55 2.01
W12x22 0.61 0.43 0.65 0.94 1.45 1.88
W12x26 0.60 0.44 0.66 0.95 1.46 1.90
W12x30 0.69 0.41 0.61 0.88 1.36 1.76
W12x35 0.79 0.38 0.57 0.82 1.26 1.64
W12x40 0.85 0.38 0.54 0.78 1.21 1.57
W12x45 0.95 0.38 0.51 0.73 1.13 1.47
W12x50 1.04 0.38 0.48 0.69 1.07 1.39
W12x53 0.99 0.38 0.50 0.72 1.10 1.43
W12x54 1.04 0.38 0.48 0.69 1.07 1.39
W12x58 1.08 0.38 0.47 0.68 1.04 1.35
W12x65 1.09 0.38 0.47 0.67 1.04 1.35
W12x72 1.20 0.38 0.44 0.63 0.97 1.26
W12x79 1.32 0.38 0.41 0.59 0.91 1.18
W12x87 1.44 0.38 0.39 0.56 0.86 1.12
W12x96 1.57 0.38 0.38 0.52 0.81 1.05
W12x106 1.73 0.38 0.38 0.49 0.75 0.98
W12x120 1.94 0.38 0.38 0.45 0.69 0.90
W12x136 2.17 0.38 0.38 0.41 0.63 0.82
W12x152 2.40 0.38 0.38 0.38 0.58 0.76
W12x170 2.66 0.38 0.38 0.38 0.54 0.70
W12x190 2.93 0.38 0.38 0.38 0.50 0.64
W12x210 3.21 0.38 0.38 0.38 0.46 0.60
W12x230 3.47 0.38 0.38 0.38 0.43 0.56
W12x262 3.76 0.38 0.38 0.38 0.40 0.52
W12x279 4.10 0.38 0.38 0.38 0.38 0.48
W12x305 4.41 0.38 0.38 0.38 0.38 0.45
W12x336 4.78 0.38 0.38 0.38 0.38 0.42
W14x22 0.52 0.47 0.70 1.02 1.56 2.03
W14x26 0.61 0.43 0.65 0.94 1.45 1.88
W14x30 0.63 0.43 0.64 0.92 1.42 1.85
W14x34 0.71 0.40 0.60 0.87 1.34 1.74
W14x38 0.79 0.38 0.57 0.82 1.26 1.64
W14x43 0.85 0.38 0.54 0.78 1.21 1.57
W14x48 0.94 0.38 0.51 0.74 1.14 1.48
W14x53 1.03 0.38 0.48 0.70 1.07 1.40
W14x61 1.07 0.38 0.47 0.68 1.05 1.36
W14x68 1.19 0.38 0.44 0.64 0.98 1.27
W14x74 1.28 0.38 0.42 0.61 0.93 1.21
W14x82 1.41 0.38 0.39 0.57 0.87 1.13
W14x90 1.27 0.38 0.42 0.61 0.94 1.22
W14x99 1.39 0.38 0.40 0.57 0.88 1.14
W14x109 1.53 0.38 0.38 0.53 0.82 1.07
W14x120 1.67 0.38 0.38 0.50 0.77 1.00
W14x132 1.83 0.38 0.38 0.47 0.72 0.94
W14x145 1.94 0.38 0.38 0.45 0.69 0.90
W14x159 2.11 0.38 0.38 0.42 0.65 0.84
W14x176 2.25 0.38 0.38 0.40 0.61 0.80
W14x193 2.32 0.38 0.38 0.39 0.60 0.78
W14x211 2.74 0.38 0.38 0.38 0.52 0.68
W14x233 3.00 0.38 0.38 0.38 0.49 0.63
W14x257 3.27 0.38 0.38 0.38 0.45 0.59
W14x283 3.57 0.38 0.38 0.38 0.42 0.55
W14x311 3.88 0.38 0.38 0.38 0.39 0.51
W14x342 4.21 0.38 0.38 0.38 0.38 0.47
W14x370 4.51 0.38 0.38 0.38 0.38 0.45
W14x398 4.80 0.38 0.38 0.38 0.38 0.42
W14x426 5.09 0.38 0.38 0.38 0.38 0.40
W14x455 5.38 0.38 0.38 0.38 0.38 0.38
W14x500 5.82 0.38 0.38 0.38 0.38 0.38
W14x550 6.30 0.38 0.38 0.38 0.38 0.38
W14x605 6.80 0.38 0.38 0.38 0.38 0.38
W16x26 0.55 0.46 0.68 0.99 1.52 1.98
W16x31 0.65 0.42 0.63 0.91 1.40 1.82
W16x36 0.69 0.41 0.61 0.88 1.36 1.76
W16x40 0.76 0.39 0.58 0.84 1.29 1.67
W16x45 0.85 0.38 0.54 0.78 1.21 1.57
W16x50 0.94 0.38 0.51 0.74 1.14 1.48
W16x67 1.07 0.38 0.47 0.68 1.05 1.36
W16x77 1.07 0.38 0.47 0.68 1.05 1.36
W16x89 1.22 0.38 0.43 0.63 0.96 1.25
W16x100 1.56 0.38 0.38 0.53 0.81 1.05
W18x35 0.66 0.42 0.63 0.90 1.39 1.81
W18x40 0.76 0.39 0.58 0.84 1.29 1.67
W18x46 0.86 0.38 0.54 0.78 1.20 1.56
W18x50 0.87 0.38 0.54 0.77 1.19 1.55
W18x55 0.95 0.38 0.51 0.73 1.13 1.47
W18x60 1.03 0.38 0.48 0.70 1.07 1.40
W18x65 1.11 0.38 0.46 0.67 1.02 1.33
W18x71 1.21 0.38 0.44 0.63 0.97 1.26
W18x76 1.11 0.38 0.46 0.67 1.02 1.33
W18x88 1.24 0.38 0.43 0.62 0.95 1.24
W18x97 1.39 0.38 0.40 0.57 0.88 1.14
W18x106 1.52 0.38 0.38 0.54 0.83 1.07
W18x119 1.68 0.38 0.38 0.50 0.77 1.00
W21x44 0.73 0.39 0.59 0.86 1.32 1.71
W21x50 0.83 0.38 0.55 0.80 1.22 1.59
W21x57 0.93 0.38 0.51 0.74 1.14 1.49
W21x62 0.94 0.38 0.51 0.74 1.14 1.48
W21x68 1.03 0.38 0.48 0.70 1.07 1.40
W21x83 1.24 0.38 0.43 0.62 0.95 1.24
1 Hr 1.5 Hr 2 Hr 3 Hr 4 Hr
W21x93 1.38 0.38 0.40 0.57 0.88 1.15
W21x101 1.29 0.38 0.42 0.60 0.93 1.20
W21x111 1.41 0.38 0.39 0.57 0.87 1.13
W21x122 1.54 0.38 0.38 0.53 0.82 1.06
W21x132 1.66 0.38 0.38 0.50 0.77 1.01
W21x147 1.83 0.38 0.38 0.47 0.72 0.94
W24x55 0.82 0.38 0.55 0.80 1.23 1.60
W24x62 0.92 0.38 0.52 0.75 1.15 1.50
W24x68 0.93 0.38 0.51 0.74 1.14 1.49
W24x76 1.02 0.38 0.49 0.70 1.08 1.40
W24x84 1.13 0.38 0.46 0.66 1.01 1.32
W24x94 1.26 0.38 0.42 0.61 0.94 1.22
W24x104 1.22 0.38 0.43 0.63 0.96 1.25
W24x117 1.36 0.38 0.40 0.58 0.89 1.16
W24x131 1.52 0.38 0.38 0.54 0.83 1.07
W24x146 1.68 0.38 0.38 0.50 0.77 1.00
W24x162 1.85 0.38 0.38 0.46 0.71 0.93
W27x84 1.02 0.38 0.49 0.70 1.08 1.40
W27x94 1.13 0.38 0.46 0.66 1.01 1.32
W27x102 1.23 0.38 0.43 0.62 0.96 1.24
W27x114 1.36 0.38 0.40 0.58 0.89 1.16
W27x146 1.53 0.38 0.38 0.53 0.82 1.07
W27x161 1.68 0.38 0.38 0.50 0.77 1.00
W27x178 1.85 0.38 0.38 0.46 0.71 0.93
W30x99 1.10 0.38 0.46 0.67 1.03 1.34
W30x108 1.20 0.38 0.44 0.63 0.97 1.26
W30x116 1.28 0.38 0.42 0.61 0.93 1.21
W30x124 1.37 0.38 0.40 0.58 0.89 1.15
W30x132 1.46 0.38 0.38 0.55 0.85 1.10
W30x173 1.66 0.38 0.38 0.50 0.77 1.01
W30x191 1.82 0.38 0.38 0.47 0.72 0.94
W30x211 2.00 0.38 0.38 0.44 0.67 0.88
W33x118 1.19 0.38 0.44 0.64 0.98 1.27
W33x130 1.31 0.38 0.41 0.60 0.92 1.19
W33x141 1.41 0.38 0.39 0.57 0.87 1.13
W33x152 1.51 0.38 0.38 0.54 0.83 1.08
W33x201 1.78 0.38 0.38 0.48 0.74 0.96
N791 - Restrained and Unrestrained Beam Ratings
D949 - Unrestrained Beam Ratings only
Minimum Thickness Required on Beam for Size Indictaed, in.
Lightweight Concrete
Unrestrained Beam Rating Restrained Beam Rating*
1 Hr 1.5 Hr 2 Hr 3 Hr 4 Hr Member W/D 1 Hr 1.5 Hr 2 Hr 3 Hr 4 Hr
0.42 0.63 0.91 1.26 1.82 W4x13 0.65 0.42 0.42 0.63 1.05 1.40
0.42 0.63 0.91 1.26 1.82 W5x16 0.65 0.42 0.42 0.63 1.05 1.40
0.39 0.58 0.84 1.16 1.67 W5x19 0.76 0.39 0.39 0.58 0.97 1.29
0.53 0.80 1.15 1.59 2.30 W6x9 0.39 0.53 0.53 0.80 1.33 1.77
0.47 0.71 1.02 1.42 2.05 W6x12 0.51 0.47 0.47 0.71 1.18 1.58
0.42 0.63 0.90 1.25 1.81 W6x16 0.66 0.42 0.42 0.63 1.04 1.39
0.41 0.62 0.90 1.24 1.79 W6x20 0.67 0.41 0.41 0.62 1.03 1.38
0.38 0.55 0.80 1.11 1.60 W6x26 0.82 0.38 0.38 0.55 0.92 1.23
0.54 0.81 1.17 1.62 2.35 W8x10 0.37 0.54 0.54 0.81 1.35 1.80
0.49 0.74 1.06 1.47 2.13 W8x13 0.47 0.49 0.49 0.74 1.23 1.64
0.46 0.69 1.00 1.38 2.00 W8x15 0.54 0.46 0.46 0.69 1.15 1.54
0.45 0.67 0.97 1.35 1.94 W8x18 0.57 0.45 0.45 0.67 1.12 1.50
0.42 0.63 0.90 1.25 1.81 W8x21 0.66 0.42 0.42 0.63 1.04 1.39
0.41 0.61 0.88 1.22 1.76 W8x24 0.69 0.41 0.41 0.61 1.02 1.36
0.38 0.56 0.81 1.13 1.63 W8x28 0.80 0.38 0.38 0.56 0.94 1.25
0.38 0.57 0.82 1.13 1.64 W8x31 0.79 0.38 0.38 0.57 0.94 1.26
0.38 0.53 0.77 1.06 1.54 W8x35 0.88 0.38 0.38 0.53 0.89 1.18
0.38 0.49 0.71 0.98 1.42 W8x40 1.00 0.38 0.38 0.49 0.82 1.09
0.38 0.44 0.64 0.88 1.28 W8x48 1.18 0.38 0.38 0.44 0.74 0.98
0.38 0.39 0.57 0.78 1.13 W8x58 1.41 0.38 0.38 0.39 0.65 0.87
0.38 0.38 0.51 0.71 1.03 W8x67 1.61 0.38 0.38 0.38 0.59 0.79
0.54 0.80 1.16 1.61 2.32 W10x12 0.38 0.54 0.54 0.80 1.34 1.79
0.49 0.73 1.05 1.46 2.11 W10x15 0.48 0.49 0.49 0.73 1.22 1.62
0.46 0.69 1.00 1.38 2.00 W10x17 0.54 0.46 0.46 0.69 1.15 1.54
0.44 0.66 0.96 1.32 1.91 W10x19 0.59 0.44 0.44 0.66 1.10 1.47
0.44 0.66 0.96 1.32 1.91 W10x22 0.59 0.44 0.44 0.66 1.10 1.47
0.41 0.61 0.88 1.22 1.76 W10x26 0.69 0.41 0.41 0.61 1.02 1.36
0.38 0.57 0.82 1.13 1.64 W10x30 0.79 0.38 0.38 0.57 0.94 1.26
0.38 0.57 0.83 1.15 1.66 W10x33 0.77 0.38 0.38 0.57 0.96 1.28
0.38 0.53 0.76 1.05 1.52 W10x39 0.90 0.38 0.38 0.53 0.88 1.17
0.38 0.48 0.70 0.97 1.40 W10x46 1.03 0.38 0.38 0.48 0.81 1.07
0.38 0.50 0.72 0.99 1.43 W10x49 0.99 0.38 0.38 0.50 0.83 1.10
0.38 0.47 0.67 0.93 1.35 W10x54 1.09 0.38 0.38 0.47 0.78 1.04
0.38 0.44 0.63 0.88 1.26 W10x60 1.20 0.38 0.38 0.44 0.73 0.97
0.38 0.40 0.58 0.80 1.16 W10x68 1.36 0.38 0.38 0.40 0.67 0.89
0.38 0.38 0.54 0.74 1.07 W10x77 1.52 0.38 0.38 0.38 0.62 0.83
0.38 0.38 0.49 0.68 0.98 W10x88 1.72 0.38 0.38 0.38 0.57 0.75
0.38 0.38 0.45 0.62 0.90 W10x100 1.93 0.38 0.38 0.38 0.52 0.69
0.38 0.38 0.42 0.57 0.83 W10x112 2.14 0.38 0.38 0.38 0.48 0.64
0.53 0.79 1.14 1.58 2.28 W12x14 0.40 0.53 0.53 0.79 1.31 1.75
0.50 0.75 1.08 1.50 2.17 W12x16 0.45 0.50 0.50 0.75 1.25 1.67
0.46 0.70 1.01 1.39 2.01 W12x19 0.53 0.46 0.46 0.70 1.16 1.55
0.43 0.65 0.94 1.30 1.88 W12x22 0.61 0.43 0.43 0.65 1.08 1.45
0.44 0.66 0.95 1.31 1.90 W12x26 0.60 0.44 0.44 0.66 1.09 1.46
0.41 0.61 0.88 1.22 1.76 W12x30 0.69 0.41 0.41 0.61 1.02 1.36
0.38 0.57 0.82 1.13 1.64 W12x35 0.79 0.38 0.38 0.57 0.94 1.26
0.38 0.54 0.78 1.09 1.57 W12x40 0.85 0.38 0.38 0.54 0.91 1.21
0.38 0.51 0.73 1.02 1.47 W12x45 0.95 0.38 0.38 0.51 0.85 1.13
0.38 0.48 0.69 0.96 1.39 W12x50 1.04 0.38 0.38 0.48 0.80 1.07
0.38 0.50 0.72 0.99 1.43 W12x53 0.99 0.38 0.38 0.50 0.83 1.10
0.38 0.48 0.69 0.96 1.39 W12x54 1.04 0.38 0.38 0.48 0.80 1.07
0.38 0.47 0.68 0.94 1.35 W12x58 1.08 0.38 0.38 0.47 0.78 1.04
0.38 0.47 0.67 0.93 1.35 W12x65 1.09 0.38 0.38 0.47 0.78 1.04
0.38 0.44 0.63 0.88 1.26 W12x72 1.20 0.38 0.38 0.44 0.73 0.97
0.38 0.41 0.59 0.82 1.18 W12x79 1.32 0.38 0.38 0.41 0.68 0.91
0.38 0.39 0.56 0.77 1.12 W12x87 1.44 0.38 0.38 0.39 0.64 0.86
0.38 0.38 0.52 0.73 1.05 W12x96 1.57 0.38 0.38 0.38 0.60 0.81
0.38 0.38 0.49 0.68 0.98 W12x106 1.73 0.38 0.38 0.38 0.56 0.75
0.38 0.38 0.45 0.62 0.90 W12x120 1.94 0.38 0.38 0.38 0.52 0.69
0.38 0.38 0.41 0.57 0.82 W12x136 2.17 0.38 0.38 0.38 0.47 0.63
0.38 0.38 0.38 0.53 0.76 W12x152 2.40 0.38 0.38 0.38 0.44 0.58
0.38 0.38 0.38 0.48 0.70 W12x170 2.66 0.38 0.38 0.38 0.40 0.54
0.38 0.38 0.38 0.45 0.64 W12x190 2.93 0.38 0.38 0.38 0.38 0.50
0.38 0.38 0.38 0.41 0.60 W12x210 3.21 0.38 0.38 0.38 0.38 0.46
0.38 0.38 0.38 0.39 0.56 W12x230 3.47 0.38 0.38 0.38 0.38 0.43
0.38 0.38 0.38 0.38 0.52 W12x262 3.76 0.38 0.38 0.38 0.38 0.40
0.38 0.38 0.38 0.38 0.48 W12x279 4.10 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.45 W12x305 4.41 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.42 W12x336 4.78 0.38 0.38 0.38 0.38 0.38
0.47 0.70 1.02 1.41 2.03 W14x22 0.52 0.47 0.47 0.70 1.17 1.56
0.43 0.65 0.94 1.30 1.88 W14x26 0.61 0.43 0.43 0.65 1.08 1.45
0.43 0.64 0.92 1.28 1.85 W14x30 0.63 0.43 0.43 0.64 1.07 1.42
0.40 0.60 0.87 1.20 1.74 W14x34 0.71 0.40 0.40 0.60 1.00 1.34
0.38 0.57 0.82 1.13 1.64 W14x38 0.79 0.38 0.38 0.57 0.94 1.26
0.38 0.54 0.78 1.09 1.57 W14x43 0.85 0.38 0.38 0.54 0.91 1.21
0.38 0.51 0.74 1.02 1.48 W14x48 0.94 0.38 0.38 0.51 0.85 1.14
0.38 0.48 0.70 0.97 1.40 W14x53 1.03 0.38 0.38 0.48 0.81 1.07
0.38 0.47 0.68 0.94 1.36 W14x61 1.07 0.38 0.38 0.47 0.79 1.05
0.38 0.44 0.64 0.88 1.27 W14x68 1.19 0.38 0.38 0.44 0.73 0.98
0.38 0.42 0.61 0.84 1.21 W14x74 1.28 0.38 0.38 0.42 0.70 0.93
0.38 0.39 0.57 0.78 1.13 W14x82 1.41 0.38 0.38 0.39 0.65 0.87
0.38 0.42 0.61 0.84 1.22 W14x90 1.27 0.38 0.38 0.42 0.70 0.94
0.38 0.40 0.57 0.79 1.14 W14x99 1.39 0.38 0.38 0.40 0.66 0.88
0.38 0.38 0.53 0.74 1.07 W14x109 1.53 0.38 0.38 0.38 0.62 0.82
0.38 0.38 0.50 0.69 1.00 W14x120 1.67 0.38 0.38 0.38 0.58 0.77
0.38 0.38 0.47 0.65 0.94 W14x132 1.83 0.38 0.38 0.38 0.54 0.72
0.38 0.38 0.45 0.62 0.90 W14x145 1.94 0.38 0.38 0.38 0.52 0.69
0.38 0.38 0.42 0.58 0.84 W14x159 2.11 0.38 0.38 0.38 0.48 0.65
0.38 0.38 0.40 0.55 0.80 W14x176 2.25 0.38 0.38 0.38 0.46 0.61
0.38 0.38 0.39 0.54 0.78 W14x193 2.32 0.38 0.38 0.38 0.45 0.60
0.38 0.38 0.38 0.47 0.68 W14x211 2.74 0.38 0.38 0.38 0.39 0.52
0.38 0.38 0.38 0.44 0.63 W14x233 3.00 0.38 0.38 0.38 0.38 0.49
0.38 0.38 0.38 0.41 0.59 W14x257 3.27 0.38 0.38 0.38 0.38 0.45
0.38 0.38 0.38 0.38 0.55 W14x283 3.57 0.38 0.38 0.38 0.38 0.42
0.38 0.38 0.38 0.38 0.51 W14x311 3.88 0.38 0.38 0.38 0.38 0.39
0.38 0.38 0.38 0.38 0.47 W14x342 4.21 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.45 W14x370 4.51 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.42 W14x398 4.80 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.40 W14x426 5.09 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x455 5.38 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x500 5.82 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x550 6.30 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x605 6.80 0.38 0.38 0.38 0.38 0.38
0.46 0.68 0.99 1.37 1.98 W16x26 0.55 0.46 0.46 0.68 1.14 1.52
0.42 0.63 0.91 1.26 1.82 W16x31 0.65 0.42 0.42 0.63 1.05 1.40
0.41 0.61 0.88 1.22 1.76 W16x36 0.69 0.41 0.41 0.61 1.02 1.36
0.39 0.58 0.84 1.16 1.67 W16x40 0.76 0.39 0.39 0.58 0.97 1.29
0.38 0.54 0.78 1.09 1.57 W16x45 0.85 0.38 0.38 0.54 0.91 1.21
0.38 0.51 0.74 1.02 1.48 W16x50 0.94 0.38 0.38 0.51 0.85 1.14
0.38 0.47 0.68 0.94 1.36 W16x67 1.07 0.38 0.38 0.47 0.79 1.05
0.38 0.47 0.68 0.94 1.36 W16x77 1.07 0.38 0.38 0.47 0.79 1.05
0.38 0.43 0.63 0.87 1.25 W16x89 1.22 0.38 0.38 0.43 0.72 0.96
0.38 0.38 0.53 0.73 1.05 W16x100 1.56 0.38 0.38 0.38 0.61 0.81
0.42 0.63 0.90 1.25 1.81 W18x35 0.66 0.42 0.42 0.63 1.04 1.39
0.39 0.58 0.84 1.16 1.67 W18x40 0.76 0.39 0.39 0.58 0.97 1.29
0.38 0.54 0.78 1.08 1.56 W18x46 0.86 0.38 0.38 0.54 0.90 1.20
0.38 0.54 0.77 1.07 1.55 W18x50 0.87 0.38 0.38 0.54 0.89 1.19
0.38 0.51 0.73 1.02 1.47 W18x55 0.95 0.38 0.38 0.51 0.85 1.13
0.38 0.48 0.70 0.97 1.40 W18x60 1.03 0.38 0.38 0.48 0.81 1.07
0.38 0.46 0.67 0.92 1.33 W18x65 1.11 0.38 0.38 0.46 0.77 1.02
0.38 0.44 0.63 0.87 1.26 W18x71 1.21 0.38 0.38 0.44 0.73 0.97
0.38 0.46 0.67 0.92 1.33 W18x76 1.11 0.38 0.38 0.46 0.77 1.02
0.38 0.43 0.62 0.86 1.24 W18x88 1.24 0.38 0.38 0.43 0.71 0.95
0.38 0.40 0.57 0.79 1.14 W18x97 1.39 0.38 0.38 0.40 0.66 0.88
0.38 0.38 0.54 0.74 1.07 W18x106 1.52 0.38 0.38 0.38 0.62 0.83
0.38 0.38 0.50 0.69 1.00 W18x119 1.68 0.38 0.38 0.38 0.58 0.77
0.39 0.59 0.86 1.18 1.71 W21x44 0.73 0.39 0.39 0.59 0.99 1.32
0.38 0.55 0.80 1.10 1.59 W21x50 0.83 0.38 0.38 0.55 0.92 1.22
0.38 0.51 0.74 1.03 1.49 W21x57 0.93 0.38 0.38 0.51 0.86 1.14
0.38 0.51 0.74 1.02 1.48 W21x62 0.94 0.38 0.38 0.51 0.85 1.14
0.38 0.48 0.70 0.97 1.40 W21x68 1.03 0.38 0.38 0.48 0.81 1.07
0.38 0.43 0.62 0.86 1.24 W21x83 1.24 0.38 0.38 0.43 0.71 0.95
0.38 0.40 0.57 0.80 1.15 W21x93 1.38 0.38 0.38 0.40 0.66 0.88
0.38 0.42 0.60 0.83 1.20 W21x101 1.29 0.38 0.38 0.42 0.69 0.93
0.38 0.39 0.57 0.78 1.13 W21x111 1.41 0.38 0.38 0.39 0.65 0.87
Minimum Thickness Required on Beam for Size Indictaed, in

0.38 0.38 0.53 0.74 1.06 W21x122 1.54 0.38 0.38 0.38 0.61 0.82
0.38 0.38 0.45 0.70 1.01 W21x132 1.66 0.38 0.38 0.38 0.52 0.77
0.38 0.38 0.42 0.65 0.94 W21x147 1.83 0.38 0.38 0.38 0.49 0.72
0.38 0.50 0.72 1.11 1.60 W24x55 0.82 0.38 0.38 0.50 0.83 1.23
0.38 0.47 0.67 1.04 1.50 W24x62 0.92 0.38 0.38 0.47 0.78 1.15
0.38 0.46 0.67 1.03 1.49 W24x68 0.93 0.38 0.38 0.46 0.77 1.14
0.38 0.44 0.63 0.97 1.40 W24x76 1.02 0.38 0.38 0.44 0.73 1.08
0.38 0.41 0.59 0.91 1.32 W24x84 1.13 0.38 0.38 0.41 0.68 1.01
0.38 0.38 0.55 0.85 1.22 W24x94 1.26 0.38 0.38 0.38 0.64 0.94
0.38 0.39 0.56 0.87 1.25 W24x104 1.22 0.38 0.38 0.39 0.65 0.96
0.38 0.38 0.52 0.80 1.16 W24x117 1.36 0.38 0.38 0.38 0.60 0.89
0.38 0.38 0.48 0.74 1.07 W24x131 1.52 0.38 0.38 0.38 0.56 0.83
0.38 0.38 0.45 0.69 1.00 W24x146 1.68 0.38 0.38 0.38 0.52 0.77
0.38 0.38 0.42 0.64 0.93 W24x162 1.85 0.38 0.38 0.38 0.48 0.71
0.38 0.44 0.63 0.97 1.40 W27x84 1.02 0.38 0.38 0.44 0.73 1.08
0.38 0.41 0.59 0.91 1.32 W27x94 1.13 0.38 0.38 0.41 0.68 1.01
0.38 0.39 0.56 0.86 1.24 W27x102 1.23 0.38 0.38 0.39 0.65 0.96
0.38 0.38 0.52 0.80 1.16 W27x114 1.36 0.38 0.38 0.38 0.60 0.89
0.38 0.38 0.48 0.74 1.07 W27x146 1.53 0.38 0.38 0.38 0.55 0.82
0.38 0.38 0.45 0.69 1.00 W27x161 1.68 0.38 0.38 0.38 0.52 0.77
0.38 0.38 0.42 0.64 0.93 W27x178 1.85 0.38 0.38 0.38 0.48 0.71
0.38 0.42 0.60 0.93 1.34 W30x99 1.10 0.38 0.38 0.42 0.69 1.03
0.38 0.39 0.57 0.88 1.26 W30x108 1.20 0.38 0.38 0.39 0.66 0.97
0.38 0.38 0.54 0.84 1.21 W30x116 1.28 0.38 0.38 0.38 0.63 0.93
0.38 0.38 0.52 0.80 1.15 W30x124 1.37 0.38 0.38 0.38 0.60 0.89
0.38 0.38 0.50 0.76 1.10 W30x132 1.46 0.38 0.38 0.38 0.57 0.85
0.38 0.38 0.45 0.70 1.01 W30x173 1.66 0.38 0.38 0.38 0.52 0.77
0.38 0.38 0.42 0.65 0.94 W30x191 1.82 0.38 0.38 0.38 0.49 0.72
0.38 0.38 0.39 0.61 0.88 W30x211 2.00 0.38 0.38 0.38 0.45 0.67
0.38 0.40 0.57 0.88 1.27 W33x118 1.19 0.38 0.38 0.40 0.66 0.98
0.38 0.38 0.54 0.82 1.19 W33x130 1.31 0.38 0.38 0.38 0.62 0.92
0.38 0.38 0.51 0.78 1.13 W33x141 1.41 0.38 0.38 0.38 0.59 0.87
0.38 0.38 0.49 0.75 1.08 W33x152 1.51 0.38 0.38 0.38 0.56 0.83
0.38 0.38 0.43 0.66 0.96 W33x201 1.78 0.38 0.38 0.38 0.50 0.74
* When used to adjust the material thickness for a Restrained beam the use of this procedure is limited to
steel sections classified as compact in accordance with the Specification for the Design of Structural Steel
Buildings by the American Institute of Steel Construction. Refer to the UL Fire Resistance Directory.
Normal Weight Concrete
0.42 0.63 0.91 1.26 1.82 W4x13 0.65 0.42 0.42 0.63 1.05 1.40
0.42 0.63 0.91 1.26 1.82 W5x16 0.65 0.42 0.42 0.63 1.05 1.40
0.39 0.58 0.84 1.16 1.67 W5x19 0.76 0.39 0.39 0.58 0.97 1.29
0.53 0.80 1.15 1.59 2.30 W6x9 0.39 0.53 0.53 0.80 1.33 1.77
0.47 0.71 1.02 1.42 2.05 W6x12 0.51 0.47 0.47 0.71 1.18 1.58
0.42 0.63 0.90 1.25 1.81 W6x16 0.66 0.42 0.42 0.63 1.04 1.39
0.41 0.62 0.90 1.24 1.79 W6x20 0.67 0.41 0.41 0.62 1.03 1.38
0.38 0.55 0.80 1.11 1.60 W6x26 0.82 0.38 0.38 0.55 0.92 1.23
0.54 0.81 1.17 1.62 2.35 W8x10 0.37 0.54 0.54 0.81 1.35 1.80
0.49 0.74 1.06 1.47 2.13 W8x13 0.47 0.49 0.49 0.74 1.23 1.64
0.46 0.69 1.00 1.38 2.00 W8x15 0.54 0.46 0.46 0.69 1.15 1.54
0.45 0.67 0.97 1.35 1.95 W8x18 0.57 0.45 0.45 0.67 1.12 1.50
0.42 0.63 0.90 1.25 1.81 W8x21 0.66 0.42 0.42 0.63 1.04 1.39
0.41 0.61 0.88 1.22 1.76 W8x24 0.69 0.41 0.41 0.61 1.02 1.36
0.38 0.56 0.81 1.13 1.63 W8x28 0.80 0.38 0.38 0.56 0.94 1.25
0.38 0.57 0.82 1.13 1.64 W8x31 0.79 0.38 0.38 0.57 0.94 1.26
0.38 0.53 0.77 1.06 1.54 W8x35 0.88 0.38 0.38 0.53 0.89 1.18
0.38 0.49 0.71 0.98 1.42 W8x40 1.00 0.38 0.38 0.49 0.82 1.09
0.38 0.44 0.64 0.88 1.28 W8x48 1.18 0.38 0.38 0.44 0.74 0.98
0.38 0.39 0.57 0.78 1.13 W8x58 1.41 0.38 0.38 0.39 0.65 0.87
0.38 0.38 0.51 0.71 1.03 W8x67 1.61 0.38 0.38 0.38 0.59 0.79
0.54 0.80 1.16 1.61 2.32 W10x12 0.38 0.54 0.54 0.80 1.34 1.79
0.49 0.73 1.05 1.46 2.11 W10x15 0.48 0.49 0.49 0.73 1.22 1.62
0.46 0.69 1.00 1.38 2.00 W10x17 0.54 0.46 0.46 0.69 1.15 1.54
0.44 0.66 0.96 1.32 1.91 W10x19 0.59 0.44 0.44 0.66 1.10 1.47
0.44 0.66 0.96 1.32 1.91 W10x22 0.59 0.44 0.44 0.66 1.10 1.47
0.41 0.61 0.88 1.22 1.76 W10x26 0.69 0.41 0.41 0.61 1.02 1.36
0.38 0.57 0.82 1.13 1.64 W10x30 0.79 0.38 0.38 0.57 0.94 1.26
0.38 0.57 0.83 1.15 1.66 W10x33 0.77 0.38 0.38 0.57 0.96 1.28
0.38 0.53 0.76 1.05 1.52 W10x39 0.90 0.38 0.38 0.53 0.88 1.17
0.38 0.48 0.70 0.97 1.40 W10x46 1.03 0.38 0.38 0.48 0.81 1.07
0.38 0.50 0.72 0.99 1.43 W10x49 0.99 0.38 0.38 0.50 0.83 1.10
0.38 0.47 0.67 0.93 1.35 W10x54 1.09 0.38 0.38 0.47 0.78 1.04
0.38 0.44 0.63 0.88 1.26 W10x60 1.20 0.38 0.38 0.44 0.73 0.97
0.38 0.40 0.58 0.80 1.16 W10x68 1.36 0.38 0.38 0.40 0.67 0.89
0.38 0.38 0.54 0.74 1.07 W10x77 1.52 0.38 0.38 0.38 0.62 0.83
0.38 0.38 0.49 0.68 0.98 W10x88 1.72 0.38 0.38 0.38 0.57 0.75
0.38 0.38 0.45 0.62 0.90 W10x100 1.93 0.38 0.38 0.38 0.52 0.69
0.38 0.38 0.42 0.57 0.83 W10x112 2.14 0.38 0.38 0.38 0.48 0.64
0.53 0.79 1.14 1.58 2.28 W12x14 0.40 0.53 0.53 0.79 1.31 1.75
0.50 0.75 1.08 1.50 2.17 W12x16 0.45 0.50 0.50 0.75 1.25 1.67
0.46 0.70 1.01 1.39 2.01 W12x19 0.53 0.46 0.46 0.70 1.16 1.55
0.43 0.65 0.94 1.30 1.88 W12x22 0.61 0.43 0.43 0.65 1.08 1.45
0.44 0.66 0.95 1.31 1.90 W12x26 0.60 0.44 0.44 0.66 1.09 1.46
0.41 0.61 0.88 1.22 1.76 W12x30 0.69 0.41 0.41 0.61 1.02 1.36
0.38 0.57 0.82 1.13 1.64 W12x35 0.79 0.38 0.38 0.57 0.94 1.26
0.38 0.54 0.78 1.09 1.57 W12x40 0.85 0.38 0.38 0.54 0.91 1.21
0.38 0.51 0.73 1.02 1.47 W12x45 0.95 0.38 0.38 0.51 0.85 1.13
0.38 0.48 0.69 0.96 1.39 W12x50 1.04 0.38 0.38 0.48 0.80 1.07
0.38 0.50 0.72 0.99 1.43 W12x53 0.99 0.38 0.38 0.50 0.83 1.10
0.38 0.48 0.69 0.96 1.39 W12x54 1.04 0.38 0.38 0.48 0.80 1.07
0.38 0.47 0.68 0.94 1.35 W12x58 1.08 0.38 0.38 0.47 0.78 1.04
0.38 0.47 0.67 0.93 1.35 W12x65 1.09 0.38 0.38 0.47 0.78 1.04
0.38 0.44 0.63 0.88 1.26 W12x72 1.20 0.38 0.38 0.44 0.73 0.97
0.38 0.41 0.59 0.82 1.19 W12x79 1.32 0.38 0.38 0.41 0.68 0.91
0.38 0.39 0.56 0.77 1.12 W12x87 1.44 0.38 0.38 0.39 0.64 0.86
0.38 0.38 0.52 0.73 1.05 W12x96 1.57 0.38 0.38 0.38 0.60 0.81
0.38 0.38 0.49 0.68 0.98 W12x106 1.73 0.38 0.38 0.38 0.56 0.75
0.38 0.38 0.45 0.62 0.90 W12x120 1.94 0.38 0.38 0.38 0.52 0.69
0.38 0.38 0.41 0.57 0.82 W12x136 2.17 0.38 0.38 0.38 0.47 0.63
0.38 0.38 0.38 0.53 0.76 W12x152 2.40 0.38 0.38 0.38 0.44 0.58
0.38 0.38 0.38 0.48 0.70 W12x170 2.66 0.38 0.38 0.38 0.40 0.54
0.38 0.38 0.38 0.45 0.64 W12x190 2.93 0.38 0.38 0.38 0.38 0.50
0.38 0.38 0.38 0.41 0.60 W12x210 3.21 0.38 0.38 0.38 0.38 0.46
0.38 0.38 0.38 0.39 0.56 W12x230 3.47 0.38 0.38 0.38 0.38 0.43
0.38 0.38 0.38 0.38 0.52 W12x262 3.76 0.38 0.38 0.38 0.38 0.40
0.38 0.38 0.38 0.38 0.48 W12x279 4.10 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.45 W12x305 4.41 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.42 W12x336 4.78 0.38 0.38 0.38 0.38 0.38
0.47 0.70 1.02 1.41 2.03 W14x22 0.52 0.47 0.47 0.70 1.17 1.56
0.43 0.65 0.94 1.30 1.88 W14x26 0.61 0.43 0.43 0.65 1.08 1.45
0.43 0.64 0.92 1.28 1.85 W14x30 0.63 0.43 0.43 0.64 1.07 1.42
0.40 0.60 0.87 1.20 1.74 W14x34 0.71 0.40 0.40 0.60 1.00 1.34
0.38 0.57 0.82 1.13 1.64 W14x38 0.79 0.38 0.38 0.57 0.94 1.26
0.38 0.54 0.78 1.09 1.57 W14x43 0.85 0.38 0.38 0.54 0.91 1.21
0.38 0.51 0.74 1.02 1.48 W14x48 0.94 0.38 0.38 0.51 0.85 1.14
0.38 0.48 0.70 0.97 1.40 W14x53 1.03 0.38 0.38 0.48 0.81 1.07
0.38 0.47 0.68 0.94 1.36 W14x61 1.07 0.38 0.38 0.47 0.79 1.05
0.38 0.44 0.64 0.88 1.27 W14x68 1.19 0.38 0.38 0.44 0.73 0.98
0.38 0.42 0.61 0.84 1.21 W14x74 1.28 0.38 0.38 0.42 0.70 0.93
0.38 0.39 0.57 0.78 1.13 W14x82 1.41 0.38 0.38 0.39 0.65 0.87
0.38 0.42 0.61 0.84 1.22 W14x90 1.27 0.38 0.38 0.42 0.70 0.94
0.38 0.40 0.57 0.79 1.14 W14x99 1.39 0.38 0.38 0.40 0.66 0.88
0.38 0.38 0.53 0.74 1.07 W14x109 1.53 0.38 0.38 0.38 0.62 0.82
0.38 0.38 0.50 0.69 1.00 W14x120 1.67 0.38 0.38 0.38 0.58 0.77
0.38 0.38 0.47 0.65 0.94 W14x132 1.83 0.38 0.38 0.38 0.54 0.72
0.38 0.38 0.45 0.62 0.90 W14x145 1.94 0.38 0.38 0.38 0.52 0.69
0.38 0.38 0.42 0.58 0.84 W14x159 2.11 0.38 0.38 0.38 0.48 0.65
0.38 0.38 0.40 0.55 0.80 W14x176 2.25 0.38 0.38 0.38 0.46 0.61
0.38 0.38 0.39 0.54 0.78 W14x193 2.32 0.38 0.38 0.38 0.45 0.60
0.38 0.38 0.38 0.47 0.68 W14x211 2.74 0.38 0.38 0.38 0.39 0.52
0.38 0.38 0.38 0.44 0.63 W14x233 3.00 0.38 0.38 0.38 0.38 0.49
0.38 0.38 0.38 0.41 0.59 W14x257 3.27 0.38 0.38 0.38 0.38 0.45
0.38 0.38 0.38 0.38 0.55 W14x283 3.57 0.38 0.38 0.38 0.38 0.42
0.38 0.38 0.38 0.38 0.51 W14x311 3.88 0.38 0.38 0.38 0.38 0.39
0.38 0.38 0.38 0.38 0.47 W14x342 4.21 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.45 W14x370 4.51 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.42 W14x398 4.80 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.40 W14x426 5.09 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x455 5.38 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x500 5.82 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x550 6.30 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x605 6.80 0.38 0.38 0.38 0.38 0.38
0.46 0.68 0.99 1.37 1.98 W16x26 0.55 0.46 0.46 0.68 1.14 1.52
0.42 0.63 0.91 1.26 1.82 W16x31 0.65 0.42 0.42 0.63 1.05 1.40
0.41 0.61 0.88 1.22 1.76 W16x36 0.69 0.41 0.41 0.61 1.02 1.36
0.39 0.58 0.84 1.16 1.67 W16x40 0.76 0.39 0.39 0.58 0.97 1.29
0.38 0.54 0.78 1.09 1.57 W16x45 0.85 0.38 0.38 0.54 0.91 1.21
0.38 0.51 0.74 1.02 1.48 W16x50 0.94 0.38 0.38 0.51 0.85 1.14
0.38 0.47 0.68 0.94 1.36 W16x67 1.07 0.38 0.38 0.47 0.79 1.05
0.38 0.47 0.68 0.94 1.36 W16x77 1.07 0.38 0.38 0.47 0.79 1.05
0.38 0.43 0.63 0.87 1.25 W16x89 1.22 0.38 0.38 0.43 0.72 0.96
0.38 0.38 0.53 0.73 1.05 W16x100 1.56 0.38 0.38 0.38 0.61 0.81
0.42 0.63 0.90 1.25 1.81 W18x35 0.66 0.42 0.42 0.63 1.04 1.39
0.39 0.58 0.84 1.16 1.67 W18x40 0.76 0.39 0.39 0.58 0.97 1.29
0.38 0.54 0.78 1.08 1.56 W18x46 0.86 0.38 0.38 0.54 0.90 1.20
0.38 0.54 0.77 1.07 1.55 W18x50 0.87 0.38 0.38 0.54 0.89 1.19
0.38 0.51 0.73 1.02 1.47 W18x55 0.95 0.38 0.38 0.51 0.85 1.13
0.38 0.48 0.70 0.97 1.40 W18x60 1.03 0.38 0.38 0.48 0.81 1.07
0.38 0.46 0.67 0.92 1.33 W18x65 1.11 0.38 0.38 0.46 0.77 1.02
0.38 0.44 0.63 0.87 1.26 W18x71 1.21 0.38 0.38 0.44 0.73 0.97
0.38 0.46 0.67 0.92 1.33 W18x76 1.11 0.38 0.38 0.46 0.77 1.02
0.38 0.43 0.62 0.86 1.24 W18x88 1.24 0.38 0.38 0.43 0.71 0.95
0.38 0.40 0.57 0.79 1.14 W18x97 1.39 0.38 0.38 0.40 0.66 0.88
0.38 0.38 0.54 0.74 1.07 W18x106 1.52 0.38 0.38 0.38 0.62 0.83
0.38 0.38 0.50 0.69 1.00 W18x119 1.68 0.38 0.38 0.38 0.58 0.77
0.39 0.59 0.86 1.18 1.71 W21x44 0.73 0.39 0.39 0.59 0.99 1.32
0.38 0.55 0.80 1.10 1.59 W21x50 0.83 0.38 0.38 0.55 0.92 1.22
0.38 0.51 0.74 1.03 1.49 W21x57 0.93 0.38 0.38 0.51 0.86 1.14
0.38 0.51 0.74 1.02 1.48 W21x62 0.94 0.38 0.38 0.51 0.85 1.14
0.38 0.48 0.70 0.97 1.40 W21x68 1.03 0.38 0.38 0.48 0.81 1.07
0.38 0.43 0.62 0.86 1.24 W21x83 1.24 0.38 0.38 0.43 0.71 0.95
0.38 0.40 0.57 0.80 1.15 W21x93 1.38 0.38 0.38 0.40 0.66 0.88
0.38 0.42 0.60 0.83 1.20 W21x101 1.29 0.38 0.38 0.42 0.69 0.93
0.38 0.39 0.57 0.78 1.13 W21x111 1.41 0.38 0.38 0.39 0.65 0.87

0.38 0.38 0.53 0.74 1.06 W21x122 1.54 0.38 0.38 0.38 0.61 0.82
0.38 0.38 0.45 0.70 1.01 W21x132 1.66 0.38 0.38 0.38 0.52 0.77
0.38 0.38 0.42 0.65 0.94 W21x147 1.83 0.38 0.38 0.38 0.49 0.72
0.38 0.50 0.72 1.11 1.60 W24x55 0.82 0.38 0.38 0.50 0.83 1.23
0.38 0.47 0.67 1.04 1.50 W24x62 0.92 0.38 0.38 0.47 0.78 1.15
0.38 0.46 0.67 1.03 1.49 W24x68 0.93 0.38 0.38 0.46 0.77 1.14
0.38 0.44 0.63 0.97 1.40 W24x76 1.02 0.38 0.38 0.44 0.73 1.08
0.38 0.41 0.59 0.91 1.32 W24x84 1.13 0.38 0.38 0.41 0.68 1.01
0.38 0.38 0.55 0.85 1.22 W24x94 1.26 0.38 0.38 0.38 0.64 0.94
0.38 0.39 0.56 0.87 1.25 W24x104 1.22 0.38 0.38 0.39 0.65 0.96
0.38 0.38 0.52 0.80 1.16 W24x117 1.36 0.38 0.38 0.38 0.60 0.89
0.38 0.38 0.48 0.74 1.07 W24x131 1.52 0.38 0.38 0.38 0.56 0.83
0.38 0.38 0.45 0.69 1.00 W24x146 1.68 0.38 0.38 0.38 0.52 0.77
0.38 0.38 0.42 0.64 0.93 W24x162 1.85 0.38 0.38 0.38 0.48 0.71
0.38 0.44 0.63 0.97 1.40 W27x84 1.02 0.38 0.38 0.44 0.73 1.08
0.38 0.41 0.59 0.91 1.32 W27x94 1.13 0.38 0.38 0.41 0.68 1.01
0.38 0.39 0.56 0.86 1.24 W27x102 1.23 0.38 0.38 0.39 0.65 0.96
0.38 0.38 0.52 0.80 1.16 W27x114 1.36 0.38 0.38 0.38 0.60 0.89
0.38 0.38 0.48 0.74 1.07 W27x146 1.53 0.38 0.38 0.38 0.55 0.82
0.38 0.38 0.45 0.69 1.00 W27x161 1.68 0.38 0.38 0.38 0.52 0.77
0.38 0.38 0.42 0.64 0.93 W27x178 1.85 0.38 0.38 0.38 0.48 0.71
0.38 0.42 0.60 0.93 1.34 W30x99 1.10 0.38 0.38 0.42 0.69 1.03
0.38 0.39 0.57 0.88 1.26 W30x108 1.20 0.38 0.38 0.39 0.66 0.97
0.38 0.38 0.54 0.84 1.21 W30x116 1.28 0.38 0.38 0.38 0.63 0.93
0.38 0.38 0.52 0.80 1.16 W30x124 1.37 0.38 0.38 0.38 0.60 0.89
0.38 0.38 0.50 0.76 1.10 W30x132 1.46 0.38 0.38 0.38 0.57 0.85
0.38 0.38 0.45 0.70 1.01 W30x173 1.66 0.38 0.38 0.38 0.52 0.77
0.38 0.38 0.42 0.65 0.94 W30x191 1.82 0.38 0.38 0.38 0.49 0.72
0.38 0.38 0.39 0.61 0.88 W30x211 2.00 0.38 0.38 0.38 0.45 0.67
0.38 0.40 0.57 0.88 1.27 W33x118 1.19 0.38 0.38 0.40 0.66 0.98
0.38 0.38 0.54 0.82 1.19 W33x130 1.31 0.38 0.38 0.38 0.62 0.92
0.38 0.38 0.51 0.78 1.13 W33x141 1.41 0.38 0.38 0.38 0.59 0.87
0.38 0.38 0.49 0.75 1.08 W33x152 1.51 0.38 0.38 0.38 0.56 0.83
0.38 0.38 0.43 0.66 0.96 W33x201 1.78 0.38 0.38 0.38 0.50 0.74
AD Southwest Type 5 GP, Type 5 MD, Type 7 GP and Type 7 HD
Unrestrained Beam Only Assembly UL N-791
Normal Weight Concrete ( NWC ) Lightweight Concrete ( LWC )
Full Flange Tip Thicknesses ( NWC ) Full Flange Tip Thicknesses ( LWC )
1 Hr 1.5 Hr 2 Hr 3 Hr Member W/D 1 Hr 1.5 Hr 2 Hr 3 Hr
0.42 0.63 0.91 1.40 W4x13 0.65 0.42 0.63 0.91 1.54
0.42 0.63 0.91 1.40 W6x16 0.65 0.42 0.63 0.91 1.54
0.39 0.58 0.84 1.29 W6x19 0.76 0.39 0.58 0.84 1.42
0.53 0.80 1.15 1.77 W6x9 0.39 0.53 0.80 1.15 1.94
0.47 0.71 1.02 1.58 W6x12 0.51 0.47 0.71 1.02 1.73
0.42 0.63 0.90 1.39 W6x16 0.66 0.42 0.63 0.90 1.53
0.41 0.62 0.90 1.38 W6x20 0.67 0.41 0.62 0.90 1.52
0.38 0.55 0.80 1.23 W6x26 0.82 0.38 0.55 0.80 1.36
0.54 0.81 1.17 1.80 W8x10 0.37 0.54 0.81 1.17 1.98
0.49 0.74 1.06 1.64 W8x13 0.47 0.49 0.74 1.06 1.80
0.46 0.69 1.00 1.54 W8x15 0.54 0.46 0.69 1.00 1.69
0.45 0.67 0.97 1.50 W8x18 0.57 0.45 0.67 0.97 1.65
0.42 0.63 0.90 1.39 W8x21 0.66 0.42 0.63 0.90 1.53
0.41 0.61 0.88 1.36 W8x24 0.69 0.41 0.61 0.88 1.49
0.38 0.56 0.81 1.25 W8x28 0.8 0.38 0.56 0.81 1.38
0.38 0.57 0.82 1.26 W8x31 0.79 0.38 0.57 0.82 1.38
0.38 0.53 0.77 1.18 W8x35 0.88 0.38 0.53 0.77 1.30
0.38 0.49 0.71 1.09 W8x40 1 0.38 0.49 0.71 1.20
0.38 0.44 0.64 0.98 W8x48 1.18 0.38 0.44 0.64 1.08
0.38 0.39 0.57 0.87 W8x58 1.41 0.38 0.39 0.57 0.96
0.38 0.38 0.51 0.79 W8x67 1.61 0.38 0.38 0.51 0.87
0.54 0.80 1.16 1.79 W10x12 0.38 0.54 0.80 1.16 1.96
0.49 0.73 1.05 1.62 W10x15 0.48 0.49 0.73 1.05 1.78
0.46 0.69 1.00 1.54 W10x17 0.54 0.46 0.69 1.00 1.69
0.44 0.66 0.96 1.47 W10x19 0.59 0.44 0.66 0.96 1.62
0.44 0.66 0.96 1.47 W10x22 0.59 0.44 0.66 0.96 1.62
0.41 0.61 0.88 1.36 W10x26 0.69 0.41 0.61 0.88 1.49
0.38 0.57 0.82 1.26 W10x30 0.79 0.38 0.57 0.82 1.38
0.38 0.57 0.83 1.28 W10x33 0.77 0.38 0.57 0.83 1.41
0.38 0.53 0.76 1.17 W10x39 0.9 0.38 0.53 0.76 1.28
0.38 0.48 0.70 1.07 W10x46 1.03 0.38 0.48 0.70 1.18
0.38 0.50 0.72 1.10 W10x49 0.99 0.38 0.50 0.72 1.21
0.38 0.47 0.67 1.04 W10x54 1.09 0.38 0.47 0.67 1.14
0.38 0.44 0.63 0.97 W10x60 1.2 0.38 0.44 0.63 1.07
0.38 0.40 0.58 0.89 W10x68 1.36 0.38 0.40 0.58 0.98
0.38 0.38 0.54 0.83 W10x77 1.52 0.38 0.38 0.54 0.91
0.38 0.38 0.49 0.75 W10x88 1.72 0.38 0.38 0.49 0.83
0.38 0.38 0.45 0.69 W10x100 1.93 0.38 0.38 0.45 0.76
0.38 0.38 0.42 0.64 W10x112 2.14 0.38 0.38 0.42 0.70
0.53 0.79 1.14 1.75 W12x14 0.4 0.53 0.79 1.14 1.93
0.50 0.75 1.08 1.67 W12x16 0.45 0.50 0.75 1.08 1.83
0.46 0.70 1.01 1.55 W12x19 0.53 0.46 0.70 1.01 1.70
0.43 0.65 0.94 1.45 W12x22 0.61 0.43 0.65 0.94 1.59
0.44 0.66 0.95 1.46 W12x26 0.6 0.44 0.66 0.95 1.60
0.41 0.61 0.88 1.36 W12x30 0.69 0.41 0.61 0.88 1.49
AD Southwest Type 5GP, Type 5 MD, Type 7 GP & Type 7 HD
Normal Weight Concrete ( NWC ) Lightweight concrete ( LWC )
Full Flange Tip Thickness ( NWC ) Full Flange Tip Thickness ( LWC )
0.38 0.57 0.82 1.26 W12x35 0.79 0.38 0.57 0.82 1.38
0.38 0.54 0.78 1.21 W12x40 0.85 0.38 0.54 0.78 1.33
0.38 0.51 0.73 1.13 W12x45 0.95 0.38 0.51 0.73 1.24
0.38 0.48 0.69 1.07 W12x50 1.04 0.38 0.48 0.69 1.17
0.38 0.50 0.72 1.10 W12x53 0.99 0.38 0.50 0.72 1.21
0.38 0.48 0.69 1.07 W12x54 1.04 0.38 0.48 0.69 1.17
0.38 0.47 0.68 1.04 W12x58 1.08 0.38 0.47 0.68 1.15
0.38 0.47 0.67 1.04 W12x65 1.09 0.38 0.47 0.67 1.14
0.38 0.44 0.63 0.97 W12x72 1.2 0.38 0.44 0.63 1.07
0.38 0.41 0.59 0.91 W12x79 1.32 0.38 0.41 0.59 1.00
0.38 0.39 0.56 0.86 W12x87 1.44 0.38 0.39 0.56 0.94
0.38 0.38 0.52 0.81 W12x96 1.57 0.38 0.38 0.52 0.89
0.38 0.38 0.49 0.75 W12x106 1.73 0.38 0.38 0.49 0.83
0.38 0.38 0.45 0.69 W12x120 1.94 0.38 0.38 0.45 0.76
0.38 0.38 0.41 0.63 W12x136 2.17 0.38 0.38 0.41 0.69
0.38 0.38 0.38 0.58 W12x152 2.4 0.38 0.38 0.38 0.64
0.38 0.38 0.38 0.54 W12x170 2.66 0.38 0.38 0.38 0.59
0.38 0.38 0.38 0.50 W12x190 2.93 0.38 0.38 0.38 0.55
0.38 0.38 0.38 0.46 W12x210 3.21 0.38 0.38 0.38 0.51
0.38 0.38 0.38 0.43 W12x230 3.47 0.38 0.38 0.38 0.47
0.38 0.38 0.38 0.40 W12x262 3.76 0.38 0.38 0.38 0.44
0.38 0.38 0.38 0.38 W12x279 4.1 0.38 0.38 0.38 0.41
0.38 0.38 0.38 0.38 W12x305 4.41 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 W12x336 4.78 0.38 0.38 0.38 0.38
0.47 0.70 1.02 1.56 W14x22 0.52 0.47 0.70 1.02 1.72
0.43 0.65 0.94 1.45 W14x26 0.61 0.43 0.65 0.94 1.59
0.43 0.64 0.92 1.42 W14x30 0.63 0.43 0.64 0.92 1.57
0.40 0.60 0.87 1.34 W14x34 0.71 0.40 0.60 0.87 1.47
0.38 0.57 0.82 1.26 W14x38 0.79 0.38 0.57 0.82 1.38
0.38 0.54 0.78 1.21 W14x43 0.85 0.38 0.54 0.78 1.33
0.38 0.51 0.74 1.14 W14x48 0.94 0.38 0.51 0.74 1.25
0.38 0.48 0.70 1.07 W14x53 1.03 0.38 0.48 0.70 1.18
0.38 0.47 0.68 1.05 W14x61 1.07 0.38 0.47 0.68 1.15
0.38 0.44 0.64 0.98 W14x68 1.19 0.38 0.44 0.64 1.08
0.38 0.42 0.61 0.93 W14x74 1.28 0.38 0.42 0.61 1.02
0.38 0.39 0.57 0.87 W14x82 1.41 0.38 0.39 0.57 0.96
0.38 0.42 0.61 0.94 W14x90 1.27 0.38 0.42 0.61 1.03
0.38 0.40 0.57 0.88 W14x99 1.39 0.38 0.40 0.57 0.97
0.38 0.38 0.53 0.82 W14x109 1.53 0.38 0.38 0.53 0.90
0.38 0.38 0.50 0.77 W14x120 1.67 0.38 0.38 0.50 0.85
0.38 0.38 0.47 0.72 W14x132 1.83 0.38 0.38 0.47 0.79
0.38 0.38 0.45 0.69 W14x145 1.94 0.38 0.38 0.45 0.76
0.38 0.38 0.42 0.65 W14x159 2.11 0.38 0.38 0.42 0.71
0.38 0.38 0.40 0.61 W14x176 2.25 0.38 0.38 0.40 0.68
0.38 0.38 0.39 0.60 W14x193 2.32 0.38 0.38 0.39 0.66
AD Southwest Type 5 GP, Type 5 MD, Type 7 GP & Type 7 HD
0.38 0.38 0.38 0.52 W14x211 2.74 0.38 0.38 0.38 0.58
0.38 0.38 0.38 0.49 W14x233 3 0.38 0.38 0.38 0.53
0.38 0.38 0.38 0.45 W14x257 3.27 0.38 0.38 0.38 0.50
0.38 0.38 0.38 0.42 W14x283 3.57 0.38 0.38 0.38 0.46
0.38 0.38 0.38 0.39 W14x311 3.88 0.38 0.38 0.38 0.43
0.38 0.38 0.38 0.38 W14x342 4.21 0.38 0.38 0.38 0.40
0.38 0.38 0.38 0.38 W14x370 4.51 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 W14x398 4.8 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 W14x426 5.09 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 W14x455 5.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 W14x500 5.82 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 W14x550 6.3 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 W14x605 6.8 0.38 0.38 0.38 0.38
0.46 0.68 0.99 1.52 W16x26 0.55 0.46 0.68 0.99 1.67
0.42 0.63 0.91 1.40 W16x31 0.65 0.42 0.63 0.91 1.54
0.41 0.61 0.88 1.36 W16x36 0.69 0.41 0.61 0.88 1.49
0.39 0.58 0.84 1.29 W16x40 0.76 0.39 0.58 0.84 1.42
0.38 0.54 0.78 1.21 W16x45 0.85 0.38 0.54 0.78 1.33
0.38 0.51 0.74 1.14 W16x50 0.94 0.38 0.51 0.74 1.25
0.38 0.47 0.68 1.05 W16x67 1.07 0.38 0.47 0.68 1.15
0.38 0.47 0.68 1.05 W16x77 1.07 0.38 0.47 0.68 1.15
0.38 0.43 0.63 0.96 W16x89 1.22 0.38 0.43 0.63 1.06
0.38 0.38 0.53 0.81 W16x100 1.56 0.38 0.38 0.53 0.89
0.42 0.63 0.90 1.39 W18x35 0.66 0.42 0.63 0.90 1.53
0.39 0.58 0.84 1.29 W18x40 0.76 0.39 0.58 0.84 1.42
0.38 0.54 0.78 1.20 W18x46 0.86 0.38 0.54 0.78 1.32
0.38 0.54 0.77 1.19 W18x50 0.87 0.38 0.54 0.77 1.31
0.38 0.51 0.73 1.13 W18x55 0.95 0.38 0.51 0.73 1.24
0.38 0.48 0.70 1.07 W18x60 1.03 0.38 0.48 0.70 1.18
0.38 0.46 0.67 1.02 W18x65 1.11 0.38 0.46 0.67 1.13
0.38 0.44 0.63 0.97 W18x71 1.21 0.38 0.44 0.63 1.06
0.38 0.46 0.67 1.02 W18x76 1.11 0.38 0.46 0.67 1.13
0.38 0.43 0.62 0.95 W18x88 1.24 0.38 0.43 0.62 1.05
0.38 0.40 0.57 0.88 W18x97 1.39 0.38 0.40 0.57 0.97
0.38 0.38 0.54 0.83 W18x106 1.52 0.38 0.38 0.54 0.91
0.38 0.38 0.50 0.77 W18x119 1.68 0.38 0.38 0.50 0.84
0.39 0.59 0.86 1.32 W21x44 0.73 0.39 0.59 0.86 1.45
0.38 0.55 0.80 1.22 W21x50 0.83 0.38 0.55 0.80 1.35
0.38 0.51 0.74 1.14 W21x57 0.93 0.38 0.51 0.74 1.26
0.38 0.51 0.74 1.14 W21x62 0.94 0.38 0.51 0.74 1.25
0.38 0.48 0.70 1.07 W21x68 1.03 0.38 0.48 0.70 1.18
0.38 0.43 0.62 0.95 W21x83 1.24 0.38 0.43 0.62 1.05
0.38 0.40 0.57 0.88 W21x93 1.38 0.38 0.40 0.57 0.97
0.38 0.42 0.60 0.93 W21x101 1.29 0.38 0.42 0.60 1.02
0.38 0.39 0.57 0.87 W21x111 1.41 0.38 0.39 0.57 0.96
0.38 0.38 0.53 0.82 W21x122 1.54 0.38 0.38 0.53 0.90
0.38 0.38 0.50 0.77 W21x132 1.66 0.38 0.38 0.50 0.85
0.38 0.38 0.47 0.72 W21x147 1.83 0.38 0.38 0.47 0.79
0.38 0.55 0.80 1.23 W24x55 0.82 0.38 0.55 0.80 1.36
0.38 0.52 0.75 1.15 W24x62 0.92 0.38 0.52 0.75 1.27
0.38 0.51 0.74 1.14 W24x68 0.93 0.38 0.51 0.74 1.26
0.38 0.49 0.70 1.08 W24x76 1.02 0.38 0.49 0.70 1.19
0.38 0.46 0.66 1.01 W24x84 1.13 0.38 0.46 0.66 1.11
0.38 0.42 0.61 0.94 W24x94 1.26 0.38 0.42 0.61 1.03
0.38 0.43 0.63 0.96 W24x104 1.22 0.38 0.43 0.63 1.06
0.38 0.40 0.58 0.89 W24x117 1.36 0.38 0.40 0.58 0.98
0.38 0.38 0.54 0.83 W24x131 1.52 0.38 0.38 0.54 0.91
0.38 0.38 0.50 0.77 W24x146 1.68 0.38 0.38 0.50 0.84
0.38 0.38 0.46 0.71 W24x162 1.85 0.38 0.38 0.46 0.79
0.38 0.49 0.70 1.08 W27x84 1.02 0.38 0.49 0.70 1.19
0.38 0.46 0.66 1.01 W27x94 1.13 0.38 0.46 0.66 1.11
0.38 0.43 0.62 0.96 W27x102 1.23 0.38 0.43 0.62 1.05
0.38 0.40 0.58 0.89 W27x114 1.36 0.38 0.40 0.58 0.98
0.38 0.38 0.53 0.82 W27x146 1.53 0.38 0.38 0.53 0.90
0.38 0.38 0.50 0.77 W27x161 1.68 0.38 0.38 0.50 0.84
0.38 0.38 0.46 0.71 W27x178 1.85 0.38 0.38 0.46 0.79
0.38 0.46 0.67 1.03 W30x99 1.1 0.38 0.46 0.67 1.13
0.38 0.44 0.63 0.97 W30x108 1.2 0.38 0.44 0.63 1.07
0.38 0.42 0.61 0.93 W30x116 1.28 0.38 0.42 0.61 1.02
0.38 0.40 0.58 0.89 W30x124 1.37 0.38 0.40 0.58 0.98
0.38 0.38 0.55 0.85 W30x132 1.46 0.38 0.38 0.55 0.93
0.38 0.38 0.50 0.77 W30x173 1.66 0.38 0.38 0.50 0.85
0.38 0.38 0.47 0.72 W30x191 1.82 0.38 0.38 0.47 0.80
0.38 0.38 0.44 0.67 W30x211 2 0.38 0.38 0.44 0.74
0.38 0.44 0.64 0.98 W33x118 1.19 0.38 0.44 0.64 1.08
0.38 0.41 0.60 0.92 W33x130 1.31 0.38 0.41 0.60 1.01
0.38 0.39 0.57 0.87 W33x141 1.41 0.38 0.39 0.57 0.96
0.38 0.38 0.54 0.83 W33x152 1.51 0.38 0.38 0.54 0.91
0.38 0.38 0.48 0.74 W33x201 1.78 0.38 0.38 0.48 0.81
Restrained Beam Only Assembly UL N-791
Minimum Thickness, in., Required on Beam When Lower Edge Thickness is Reduced by One-Half*
Full Flange Tip Thicknesses ( NWC & LWC) 1/2 Flange Tip Thicknesses (NWC & LWC)
0.42 0.42 0.63 1.05 1.40 W4x13 0.65 0.42 0.42 0.63 1.05 1.47
0.42 0.42 0.63 1.05 1.40 W6x16 0.65 0.42 0.42 0.63 1.05 1.47
0.39 0.39 0.58 0.97 1.29 W6x19 0.76 0.39 0.39 0.58 0.97 1.35
0.53 0.53 0.80 1.33 1.77 W6x9 0.39 0.53 0.53 0.80 1.33 1.86
0.47 0.47 0.71 1.18 1.58 W6x12 0.51 0.47 0.47 0.71 1.18 1.66
0.42 0.42 0.63 1.04 1.39 W6x16 0.66 0.42 0.42 0.63 1.04 1.46
0.41 0.41 0.62 1.03 1.38 W6x20 0.67 0.41 0.41 0.62 1.03 1.45
0.38 0.38 0.55 0.92 1.23 W6x26 0.82 0.38 0.38 0.55 0.92 1.29
0.54 0.54 0.81 1.35 1.80 W8x10 0.37 0.54 0.54 0.81 1.35 1.89
0.49 0.49 0.74 1.23 1.64 W8x13 0.47 0.49 0.49 0.74 1.23 1.72
0.46 0.46 0.69 1.15 1.54 W8x15 0.54 0.46 0.46 0.69 1.15 1.61
0.45 0.45 0.67 1.12 1.50 W8x18 0.57 0.45 0.45 0.67 1.12 1.57
0.42 0.42 0.63 1.04 1.39 W8x21 0.66 0.42 0.42 0.63 1.04 1.46
0.41 0.41 0.61 1.02 1.36 W8x24 0.69 0.41 0.41 0.61 1.02 1.42
0.38 0.38 0.56 0.94 1.25 W8x28 0.8 0.38 0.38 0.56 0.94 1.31
0.38 0.38 0.57 0.94 1.26 W8x31 0.79 0.38 0.38 0.57 0.94 1.32
0.38 0.38 0.53 0.89 1.18 W8x35 0.88 0.38 0.38 0.53 0.89 1.24
0.38 0.38 0.49 0.82 1.09 W8x40 1 0.38 0.38 0.49 0.82 1.15
0.38 0.38 0.44 0.74 0.98 W8x48 1.18 0.38 0.38 0.44 0.74 1.03
0.38 0.38 0.39 0.65 0.87 W8x58 1.41 0.38 0.38 0.39 0.65 0.91
0.38 0.38 0.38 0.59 0.79 W8x67 1.61 0.38 0.38 0.38 0.59 0.83
0.54 0.54 0.80 1.34 1.79 W10x12 0.38 0.54 0.54 0.80 1.34 1.88
0.49 0.49 0.73 1.22 1.62 W10x15 0.48 0.49 0.49 0.73 1.22 1.70
0.46 0.46 0.69 1.15 1.54 W10x17 0.54 0.46 0.46 0.69 1.15 1.61
0.44 0.44 0.66 1.10 1.47 W10x19 0.59 0.44 0.44 0.66 1.10 1.54
0.44 0.44 0.66 1.10 1.47 W10x22 0.59 0.44 0.44 0.66 1.10 1.54
0.41 0.41 0.61 1.02 1.36 W10x26 0.69 0.41 0.41 0.61 1.02 1.42
0.38 0.38 0.57 0.94 1.26 W10x30 0.79 0.38 0.38 0.57 0.94 1.32
0.38 0.38 0.57 0.96 1.28 W10x33 0.77 0.38 0.38 0.57 0.96 1.34
0.38 0.38 0.53 0.88 1.17 W10x39 0.9 0.38 0.38 0.53 0.88 1.23
0.38 0.38 0.48 0.81 1.07 W10x46 1.03 0.38 0.38 0.48 0.81 1.13
0.38 0.38 0.50 0.83 1.10 W10x49 0.99 0.38 0.38 0.50 0.83 1.16
0.38 0.38 0.47 0.78 1.04 W10x54 1.09 0.38 0.38 0.47 0.78 1.09
0.38 0.38 0.44 0.73 0.97 W10x60 1.2 0.38 0.38 0.44 0.73 1.02
0.38 0.38 0.40 0.67 0.89 W10x68 1.36 0.38 0.38 0.40 0.67 0.94
0.38 0.38 0.38 0.62 0.83 W10x77 1.52 0.38 0.38 0.38 0.62 0.87
0.38 0.38 0.38 0.57 0.75 W10x88 1.72 0.38 0.38 0.38 0.57 0.79
0.38 0.38 0.38 0.52 0.69 W10x100 1.93 0.38 0.38 0.38 0.52 0.73
0.38 0.38 0.38 0.48 0.64 W10x112 2.14 0.38 0.38 0.38 0.48 0.67
0.53 0.53 0.79 1.31 1.75 W12x14 0.4 0.53 0.53 0.79 1.31 1.84
0.50 0.50 0.75 1.25 1.67 W12x16 0.45 0.50 0.50 0.75 1.25 1.75
0.46 0.46 0.70 1.16 1.55 W12x19 0.53 0.46 0.46 0.70 1.16 1.63
0.43 0.43 0.65 1.08 1.45 W12x22 0.61 0.43 0.43 0.65 1.08 1.52
0.44 0.44 0.66 1.09 1.46 W12x26 0.6 0.44 0.44 0.66 1.09 1.53
0.41 0.41 0.61 1.02 1.36 W12x30 0.69 0.41 0.41 0.61 1.02 1.42
0.38 0.38 0.57 0.94 1.26 W12x35 0.79 0.38 0.38 0.57 0.94 1.32
0.38 0.38 0.54 0.91 1.21 W12x40 0.85 0.38 0.38 0.54 0.91 1.27
0.38 0.38 0.51 0.85 1.13 W12x45 0.95 0.38 0.38 0.51 0.85 1.19
0.38 0.38 0.48 0.80 1.07 W12x50 1.04 0.38 0.38 0.48 0.80 1.12
0.38 0.38 0.50 0.83 1.10 W12x53 0.99 0.38 0.38 0.50 0.83 1.16
0.38 0.38 0.48 0.80 1.07 W12x54 1.04 0.38 0.38 0.48 0.80 1.12
0.38 0.38 0.47 0.78 1.04 W12x58 1.08 0.38 0.38 0.47 0.78 1.09
0.38 0.38 0.47 0.78 1.04 W12x65 1.09 0.38 0.38 0.47 0.78 1.09
0.38 0.38 0.44 0.73 0.97 W12x72 1.2 0.38 0.38 0.44 0.73 1.02
0.38 0.38 0.41 0.68 0.91 W12x79 1.32 0.38 0.38 0.41 0.68 0.96
0.38 0.38 0.39 0.64 0.86 W12x87 1.44 0.38 0.38 0.39 0.64 0.90
0.38 0.38 0.38 0.60 0.81 W12x96 1.57 0.38 0.38 0.38 0.60 0.85
0.38 0.38 0.38 0.56 0.75 W12x106 1.73 0.38 0.38 0.38 0.56 0.79
0.38 0.38 0.38 0.52 0.69 W12x120 1.94 0.38 0.38 0.38 0.52 0.72
0.38 0.38 0.38 0.47 0.63 W12x136 2.17 0.38 0.38 0.38 0.47 0.66
0.38 0.38 0.39 0.64 0.86 W12x87 1.44 0.38 0.38 0.39 0.64 0.90
0.38 0.38 0.38 0.60 0.81 W12x96 1.57 0.38 0.38 0.38 0.60 0.85
0.38 0.38 0.38 0.56 0.75 W12x106 1.73 0.38 0.38 0.38 0.56 0.79
0.38 0.38 0.38 0.52 0.69 W12x120 1.94 0.38 0.38 0.38 0.52 0.72
0.38 0.38 0.38 0.47 0.63 W12x136 2.17 0.38 0.38 0.38 0.47 0.66
0.38 0.38 0.38 0.44 0.58 W12x152 2.4 0.38 0.38 0.38 0.44 0.61
0.38 0.38 0.38 0.40 0.54 W12x170 2.66 0.38 0.38 0.38 0.40 0.56
0.38 0.38 0.38 0.38 0.50 W12x190 2.93 0.38 0.38 0.38 0.38 0.52
0.38 0.38 0.38 0.38 0.46 W12x210 3.21 0.38 0.38 0.38 0.38 0.48
0.38 0.38 0.38 0.38 0.43 W12x230 3.47 0.38 0.38 0.38 0.38 0.45
0.38 0.38 0.38 0.38 0.40 W12x262 3.76 0.38 0.38 0.38 0.38 0.42
0.38 0.38 0.38 0.38 0.38 W12x279 4.1 0.38 0.38 0.38 0.38 0.39
0.38 0.38 0.38 0.38 0.38 W12x305 4.41 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W12x336 4.78 0.38 0.38 0.38 0.38 0.38
0.47 0.47 0.70 1.17 1.56 W14x22 0.52 0.47 0.47 0.70 1.17 1.64
0.43 0.43 0.65 1.08 1.45 W14x26 0.61 0.43 0.43 0.65 1.08 1.52
0.43 0.43 0.64 1.07 1.42 W14x30 0.63 0.43 0.43 0.64 1.07 1.49
0.40 0.40 0.60 1.00 1.34 W14x34 0.71 0.40 0.40 0.60 1.00 1.40
0.38 0.38 0.57 0.94 1.26 W14x38 0.79 0.38 0.38 0.57 0.94 1.32
0.38 0.38 0.54 0.91 1.21 W14x43 0.85 0.38 0.38 0.54 0.91 1.27
0.38 0.38 0.51 0.85 1.14 W14x48 0.94 0.38 0.38 0.51 0.85 1.19
0.38 0.38 0.48 0.81 1.07 W14x53 1.03 0.38 0.38 0.48 0.81 1.13
0.38 0.38 0.47 0.79 1.05 W14x61 1.07 0.38 0.38 0.47 0.79 1.10
0.38 0.38 0.44 0.73 0.98 W14x68 1.19 0.38 0.38 0.44 0.73 1.03
0.38 0.38 0.42 0.70 0.93 W14x74 1.28 0.38 0.38 0.42 0.70 0.98
0.38 0.38 0.39 0.65 0.87 W14x82 1.41 0.38 0.38 0.39 0.65 0.91
0.38 0.38 0.42 0.70 0.94 W14x90 1.27 0.38 0.38 0.42 0.70 0.98
0.38 0.38 0.40 0.66 0.88 W14x99 1.39 0.38 0.38 0.40 0.66 0.92
0.38 0.38 0.38 0.62 0.82 W14x109 1.53 0.38 0.38 0.38 0.62 0.86
0.38 0.38 0.38 0.58 0.77 W14x120 1.67 0.38 0.38 0.38 0.58 0.81
0.38 0.38 0.38 0.54 0.72 W14x132 1.83 0.38 0.38 0.38 0.54 0.76
0.38 0.38 0.38 0.52 0.69 W14x145 1.94 0.38 0.38 0.38 0.52 0.72
0.38 0.38 0.38 0.48 0.65 W14x159 2.11 0.38 0.38 0.38 0.48 0.68
0.38 0.38 0.38 0.46 0.61 W14x176 2.25 0.38 0.38 0.38 0.46 0.64
0.38 0.38 0.38 0.45 0.60 W14x193 2.32 0.38 0.38 0.38 0.45 0.63
0.38 0.38 0.38 0.39 0.52 W14x211 2.74 0.38 0.38 0.38 0.39 0.55
0.38 0.38 0.38 0.38 0.49 W14x233 3 0.38 0.38 0.38 0.38 0.51
0.38 0.38 0.38 0.38 0.45 W14x257 3.27 0.38 0.38 0.38 0.38 0.47
0.38 0.38 0.38 0.38 0.42 W14x283 3.57 0.38 0.38 0.38 0.38 0.44
0.38 0.38 0.38 0.38 0.39 W14x311 3.88 0.38 0.38 0.38 0.38 0.41
0.38 0.38 0.38 0.38 0.38 W14x342 4.21 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x370 4.51 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x398 4.8 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x426 5.09 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x455 5.38 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x500 5.82 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x550 6.3 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x605 6.8 0.38 0.38 0.38 0.38 0.38
0.46 0.46 0.68 1.14 1.52 W16x26 0.55 0.46 0.46 0.68 1.14 1.60
0.42 0.42 0.63 1.05 1.40 W16x31 0.65 0.42 0.42 0.63 1.05 1.47
0.41 0.41 0.61 1.02 1.36 W16x36 0.69 0.41 0.41 0.61 1.02 1.42
0.39 0.39 0.58 0.97 1.29 W16x40 0.76 0.39 0.39 0.58 0.97 1.35
0.38 0.38 0.54 0.91 1.21 W16x45 0.85 0.38 0.38 0.54 0.91 1.27
0.38 0.38 0.51 0.85 1.14 W16x50 0.94 0.38 0.38 0.51 0.85 1.19
0.38 0.38 0.47 0.79 1.05 W16x67 1.07 0.38 0.38 0.47 0.79 1.10
0.38 0.38 0.47 0.79 1.05 W16x77 1.07 0.38 0.38 0.47 0.79 1.10
0.38 0.38 0.43 0.72 0.96 W16x89 1.22 0.38 0.38 0.43 0.72 1.01
0.38 0.38 0.38 0.61 0.81 W16x100 1.56 0.38 0.38 0.38 0.61 0.85
0.42 0.42 0.63 1.04 1.39 W18x35 0.66 0.42 0.42 0.63 1.04 1.46
0.39 0.39 0.58 0.97 1.29 W18x40 0.76 0.39 0.39 0.58 0.97 1.35
0.38 0.38 0.54 0.90 1.20 W18x46 0.86 0.38 0.38 0.54 0.90 1.26
0.38 0.38 0.54 0.89 1.19 W18x50 0.87 0.38 0.38 0.54 0.89 1.25
0.38 0.38 0.51 0.85 1.13 W18x55 0.95 0.38 0.38 0.51 0.85 1.19
0.38 0.38 0.48 0.81 1.07 W18x60 1.03 0.38 0.38 0.48 0.81 1.13
0.38 0.38 0.46 0.77 1.02 W18x65 1.11 0.38 0.38 0.46 0.77 1.07
0.38 0.38 0.44 0.73 0.97 W18x71 1.21 0.38 0.38 0.44 0.73 1.02
0.38 0.38 0.46 0.77 1.02 W18x76 1.11 0.38 0.38 0.46 0.77 1.07
0.38 0.38 0.43 0.71 0.95 W18x88 1.24 0.38 0.38 0.43 0.71 1.00
0.38 0.38 0.40 0.66 0.88 W18x97 1.39 0.38 0.38 0.40 0.66 0.92
0.38 0.38 0.38 0.62 0.83 W18x106 1.52 0.38 0.38 0.38 0.62 0.87
0.38 0.38 0.38 0.58 0.77 W18x119 1.68 0.38 0.38 0.38 0.58 0.81
0.39 0.39 0.59 0.99 1.32 W21x44 0.73 0.39 0.39 0.59 0.99 1.38
0.38 0.38 0.55 0.92 1.22 W21x50 0.83 0.38 0.38 0.55 0.92 1.28
0.38 0.38 0.51 0.86 1.14 W21x57 0.93 0.38 0.38 0.51 0.86 1.20
0.38 0.38 0.51 0.85 1.14 W21x62 0.94 0.38 0.38 0.51 0.85 1.19
0.38 0.38 0.48 0.81 1.07 W21x68 1.03 0.38 0.38 0.48 0.81 1.13
0.38 0.38 0.43 0.71 0.95 W21x83 1.24 0.38 0.38 0.43 0.71 1.00
0.38 0.38 0.40 0.66 0.88 W21x93 1.38 0.38 0.38 0.40 0.66 0.93
0.38 0.38 0.42 0.69 0.93 W21x101 1.29 0.38 0.38 0.42 0.69 0.97
0.38 0.38 0.39 0.65 0.87 W21x111 1.41 0.38 0.38 0.39 0.65 0.91
0.38 0.38 0.38 0.61 0.82 W21x122 1.54 0.38 0.38 0.38 0.61 0.86
0.38 0.38 0.38 0.58 0.77 W21x132 1.66 0.38 0.38 0.38 0.58 0.81
0.38 0.38 0.38 0.54 0.72 W21x147 1.83 0.38 0.38 0.38 0.54 0.76
0.38 0.38 0.55 0.92 1.23 W24x55 0.82 0.38 0.38 0.55 0.92 1.29
0.38 0.38 0.52 0.86 1.15 W24x62 0.92 0.38 0.38 0.52 0.86 1.21
0.38 0.38 0.51 0.86 1.14 W24x68 0.93 0.38 0.38 0.51 0.86 1.20
0.38 0.38 0.49 0.81 1.08 W24x76 1.02 0.38 0.38 0.49 0.81 1.13
0.38 0.38 0.46 0.76 1.01 W24x84 1.13 0.38 0.38 0.46 0.76 1.06
0.38 0.38 0.42 0.71 0.94 W24x94 1.26 0.38 0.38 0.42 0.71 0.99
0.38 0.38 0.43 0.72 0.96 W24x104 1.22 0.38 0.38 0.43 0.72 1.01
0.38 0.38 0.40 0.67 0.89 W24x117 1.36 0.38 0.38 0.40 0.67 0.94
0.38 0.38 0.38 0.62 0.83 W24x131 1.52 0.38 0.38 0.38 0.62 0.87
0.38 0.38 0.38 0.58 0.77 W24x146 1.68 0.38 0.38 0.38 0.58 0.81
0.38 0.38 0.38 0.54 0.71 W24x162 1.85 0.38 0.38 0.38 0.54 0.75
0.38 0.38 0.49 0.81 1.08 W27x84 1.02 0.38 0.38 0.49 0.81 1.13
0.38 0.38 0.46 0.76 1.01 W27x94 1.13 0.38 0.38 0.46 0.76 1.06
0.38 0.38 0.43 0.72 0.96 W27x102 1.23 0.38 0.38 0.43 0.72 1.00
0.38 0.38 0.40 0.67 0.89 W27x114 1.36 0.38 0.38 0.40 0.67 0.94
0.38 0.38 0.38 0.62 0.82 W27x146 1.53 0.38 0.38 0.38 0.62 0.86
0.38 0.38 0.38 0.58 0.77 W27x161 1.68 0.38 0.38 0.38 0.58 0.81
0.38 0.38 0.38 0.54 0.71 W27x178 1.85 0.38 0.38 0.38 0.54 0.75
0.38 0.38 0.46 0.77 1.03 W30x99 1.1 0.38 0.38 0.46 0.77 1.08
0.38 0.38 0.44 0.73 0.97 W30x108 1.2 0.38 0.38 0.44 0.73 1.02
0.38 0.38 0.42 0.70 0.93 W30x116 1.28 0.38 0.38 0.42 0.70 0.98
0.38 0.38 0.40 0.67 0.89 W30x124 1.37 0.38 0.38 0.40 0.67 0.93
0.38 0.38 0.38 0.64 0.85 W30x132 1.46 0.38 0.38 0.38 0.64 0.89
0.38 0.38 0.38 0.58 0.77 W30x173 1.66 0.38 0.38 0.38 0.58 0.81
0.38 0.38 0.38 0.54 0.72 W30x191 1.82 0.38 0.38 0.38 0.54 0.76
0.38 0.38 0.38 0.50 0.67 W30x211 2 0.38 0.38 0.38 0.50 0.71
0.38 0.38 0.44 0.73 0.98 W33x118 1.19 0.38 0.38 0.44 0.73 1.03
0.38 0.38 0.41 0.69 0.92 W33x130 1.31 0.38 0.38 0.41 0.69 0.96
0.38 0.38 0.39 0.65 0.87 W33x141 1.41 0.38 0.38 0.39 0.65 0.91
0.38 0.38 0.38 0.62 0.83 W33x152 1.51 0.38 0.38 0.38 0.62 0.87
0.38 0.38 0.38 0.55 0.74 W33x201 1.78 0.38 0.38 0.38 0.55 0.77
*Thickness applied to beam's lower flange edge shall not be less than 1/4-in
0.42 0.63 0.91 1.40 1.82 W4x13 0.65 0.42 0.63 0.91 1.54 2.17
0.42 0.63 0.91 1.40 1.82 W6x16 0.65 0.42 0.63 0.91 1.54 2.17
0.39 0.58 0.84 1.29 1.67 W6x19 0.76 0.39 0.58 0.84 1.42 1.99
0.53 0.80 1.15 1.77 2.30 W6x9 0.39 0.53 0.80 1.15 1.94 2.74
0.47 0.71 1.02 1.58 2.05 W6x12 0.51 0.47 0.71 1.02 1.73 2.44
0.42 0.63 0.90 1.39 1.81 W6x16 0.66 0.42 0.63 0.90 1.53 2.15
0.41 0.62 0.90 1.38 1.79 W6x20 0.67 0.41 0.62 0.90 1.52 2.14
0.38 0.55 0.80 1.23 1.60 W6x26 0.82 0.38 0.55 0.80 1.36 1.91
0.54 0.81 1.17 1.80 2.35 W8x10 0.37 0.54 0.81 1.17 1.98 2.80
0.49 0.74 1.06 1.64 2.13 W8x13 0.47 0.49 0.74 1.06 1.80 2.54
0.46 0.69 1.00 1.54 2.00 W8x15 0.54 0.46 0.69 1.00 1.69 2.38
0.45 0.67 0.97 1.50 1.94 W8x18 0.57 0.45 0.67 0.97 1.65 2.32
0.42 0.63 0.90 1.39 1.81 W8x21 0.66 0.42 0.63 0.90 1.53 2.15
0.41 0.61 0.88 1.36 1.76 W8x24 0.69 0.41 0.61 0.88 1.49 2.10
0.38 0.56 0.81 1.25 1.63 W8x28 0.8 0.38 0.56 0.81 1.38 1.94
0.38 0.57 0.82 1.26 1.64 W8x31 0.79 0.38 0.57 0.82 1.38 1.95
0.38 0.53 0.77 1.18 1.54 W8x35 0.88 0.38 0.53 0.77 1.30 1.83
0.38 0.49 0.71 1.09 1.42 W8x40 1 0.38 0.49 0.71 1.20 1.70
0.38 0.44 0.64 0.98 1.28 W8x48 1.18 0.38 0.44 0.64 1.08 1.52
0.38 0.39 0.57 0.87 1.13 W8x58 1.41 0.38 0.39 0.57 0.96 1.35
0.38 0.38 0.51 0.79 1.03 W8x67 1.61 0.38 0.38 0.51 0.87 1.23
0.54 0.80 1.16 1.79 2.32 W10x12 0.38 0.54 0.80 1.16 1.96 2.77
0.49 0.73 1.05 1.62 2.11 W10x15 0.48 0.49 0.73 1.05 1.78 2.51
0.46 0.69 1.00 1.54 2.00 W10x17 0.54 0.46 0.69 1.00 1.69 2.38
0.44 0.66 0.96 1.47 1.91 W10x19 0.59 0.44 0.66 0.96 1.62 2.28
0.44 0.66 0.96 1.47 1.91 W10x22 0.59 0.44 0.66 0.96 1.62 2.28
0.41 0.61 0.88 1.36 1.76 W10x26 0.69 0.41 0.61 0.88 1.49 2.10
0.38 0.57 0.82 1.26 1.64 W10x30 0.79 0.38 0.57 0.82 1.38 1.95
0.38 0.57 0.83 1.28 1.66 W10x33 0.77 0.38 0.57 0.83 1.41 1.98
0.38 0.53 0.76 1.17 1.52 W10x39 0.9 0.38 0.53 0.76 1.28 1.81
0.38 0.48 0.70 1.07 1.40 W10x46 1.03 0.38 0.48 0.70 1.18 1.66
0.38 0.50 0.72 1.10 1.43 W10x49 0.99 0.38 0.50 0.72 1.21 1.71
0.38 0.47 0.67 1.04 1.35 W10x54 1.09 0.38 0.47 0.67 1.14 1.61
0.38 0.44 0.63 0.97 1.26 W10x60 1.2 0.38 0.44 0.63 1.07 1.51
0.38 0.40 0.58 0.89 1.16 W10x68 1.36 0.38 0.40 0.58 0.98 1.38
0.38 0.38 0.54 0.83 1.07 W10x77 1.52 0.38 0.38 0.54 0.91 1.28
0.38 0.38 0.49 0.75 0.98 W10x88 1.72 0.38 0.38 0.49 0.83 1.17
0.38 0.38 0.45 0.69 0.90 W10x100 1.93 0.38 0.38 0.45 0.76 1.07
0.38 0.38 0.42 0.64 0.83 W10x112 2.14 0.38 0.38 0.42 0.70 0.99
0.53 0.79 1.14 1.75 2.28 W12x14 0.4 0.53 0.79 1.14 1.93 2.71
0.50 0.75 1.08 1.67 2.17 W12x16 0.45 0.50 0.75 1.08 1.83 2.58
0.46 0.70 1.01 1.55 2.01 W12x19 0.53 0.46 0.70 1.01 1.70 2.40
0.43 0.65 0.94 1.45 1.88 W12x22 0.61 0.43 0.65 0.94 1.59 2.24
0.44 0.66 0.95 1.46 1.90 W12x26 0.6 0.44 0.66 0.95 1.60 2.26
0.41 0.61 0.88 1.36 1.76 W12x30 0.69 0.41 0.61 0.88 1.49 2.10
0.38 0.57 0.82 1.26 1.64 W12x35 0.79 0.38 0.57 0.82 1.38 1.95
0.38 0.54 0.78 1.21 1.57 W12x40 0.85 0.38 0.54 0.78 1.33 1.87
0.38 0.51 0.73 1.13 1.47 W12x45 0.95 0.38 0.51 0.73 1.24 1.75
0.38 0.48 0.69 1.07 1.39 W12x50 1.04 0.38 0.48 0.69 1.17 1.65
0.38 0.50 0.72 1.10 1.43 W12x53 0.99 0.38 0.50 0.72 1.21 1.71
0.38 0.48 0.69 1.07 1.39 W12x54 1.04 0.38 0.48 0.69 1.17 1.65
0.38 0.47 0.68 1.04 1.35 W12x58 1.08 0.38 0.47 0.68 1.15 1.61
0.38 0.47 0.67 1.04 1.35 W12x65 1.09 0.38 0.47 0.67 1.14 1.61
0.38 0.44 0.63 0.97 1.26 W12x72 1.2 0.38 0.44 0.63 1.07 1.51
0.38 0.41 0.59 0.91 1.18 W12x79 1.32 0.38 0.41 0.59 1.00 1.41
0.38 0.39 0.56 0.86 1.12 W12x87 1.44 0.38 0.39 0.56 0.94 1.33
0.38 0.38 0.52 0.81 1.05 W12x96 1.57 0.38 0.38 0.52 0.89 1.25
0.38 0.38 0.49 0.75 0.98 W12x106 1.73 0.38 0.38 0.49 0.83 1.16
0.38 0.38 0.45 0.69 0.90 W12x120 1.94 0.38 0.38 0.45 0.76 1.07
0.38 0.38 0.41 0.63 0.82 W12x136 2.17 0.38 0.38 0.41 0.69 0.98
0.38 0.39 0.56 0.86 1.12 W12x87 1.44 0.38 0.39 0.56 0.94 1.33
0.38 0.38 0.52 0.81 1.05 W12x96 1.57 0.38 0.38 0.52 0.89 1.25
0.38 0.38 0.49 0.75 0.98 W12x106 1.73 0.38 0.38 0.49 0.83 1.16
0.38 0.38 0.45 0.69 0.90 W12x120 1.94 0.38 0.38 0.45 0.76 1.07
0.38 0.38 0.41 0.63 0.82 W12x136 2.17 0.38 0.38 0.41 0.69 0.98
0.38 0.38 0.38 0.58 0.76 W12x152 2.4 0.38 0.38 0.38 0.64 0.90
0.38 0.38 0.38 0.54 0.70 W12x170 2.66 0.38 0.38 0.38 0.59 0.83
0.38 0.38 0.38 0.50 0.64 W12x190 2.93 0.38 0.38 0.38 0.55 0.77
0.38 0.38 0.38 0.46 0.60 W12x210 3.21 0.38 0.38 0.38 0.51 0.71
0.38 0.38 0.38 0.43 0.56 W12x230 3.47 0.38 0.38 0.38 0.47 0.67
0.38 0.38 0.38 0.40 0.52 W12x262 3.76 0.38 0.38 0.38 0.44 0.62
0.38 0.38 0.38 0.38 0.48 W12x279 4.1 0.38 0.38 0.38 0.41 0.58
0.38 0.38 0.38 0.38 0.45 W12x305 4.41 0.38 0.38 0.38 0.38 0.54
0.38 0.38 0.38 0.38 0.42 W12x336 4.78 0.38 0.38 0.38 0.38 0.50
0.47 0.70 1.02 1.56 2.03 W14x22 0.52 0.47 0.70 1.02 1.72 2.42
0.43 0.65 0.94 1.45 1.88 W14x26 0.61 0.43 0.65 0.94 1.59 2.24
0.43 0.64 0.92 1.42 1.85 W14x30 0.63 0.43 0.64 0.92 1.57 2.21
0.40 0.60 0.87 1.34 1.74 W14x34 0.71 0.40 0.60 0.87 1.47 2.07
0.38 0.57 0.82 1.26 1.64 W14x38 0.79 0.38 0.57 0.82 1.38 1.95
0.38 0.54 0.78 1.21 1.57 W14x43 0.85 0.38 0.54 0.78 1.33 1.87
0.38 0.51 0.74 1.14 1.48 W14x48 0.94 0.38 0.51 0.74 1.25 1.76
0.38 0.48 0.70 1.07 1.40 W14x53 1.03 0.38 0.48 0.70 1.18 1.66
0.38 0.47 0.68 1.05 1.36 W14x61 1.07 0.38 0.47 0.68 1.15 1.62
0.38 0.44 0.64 0.98 1.27 W14x68 1.19 0.38 0.44 0.64 1.08 1.52
0.38 0.42 0.61 0.93 1.21 W14x74 1.28 0.38 0.42 0.61 1.02 1.44
0.38 0.39 0.57 0.87 1.13 W14x82 1.41 0.38 0.39 0.57 0.96 1.35
0.38 0.42 0.61 0.94 1.22 W14x90 1.27 0.38 0.42 0.61 1.03 1.45
0.38 0.40 0.57 0.88 1.14 W14x99 1.39 0.38 0.40 0.57 0.97 1.36
0.38 0.38 0.53 0.82 1.07 W14x109 1.53 0.38 0.38 0.53 0.90 1.27
0.38 0.38 0.50 0.77 1.00 W14x120 1.67 0.38 0.38 0.50 0.85 1.19
0.38 0.38 0.47 0.72 0.94 W14x132 1.83 0.38 0.38 0.47 0.79 1.12
0.38 0.38 0.45 0.69 0.90 W14x145 1.94 0.38 0.38 0.45 0.76 1.07
0.38 0.38 0.42 0.65 0.84 W14x159 2.11 0.38 0.38 0.42 0.71 1.00
0.38 0.38 0.40 0.61 0.80 W14x176 2.25 0.38 0.38 0.40 0.68 0.95
0.38 0.38 0.39 0.60 0.78 W14x193 2.32 0.38 0.38 0.39 0.66 0.93
0.38 0.38 0.38 0.52 0.68 W14x211 2.74 0.38 0.38 0.38 0.58 0.81
0.38 0.38 0.38 0.49 0.63 W14x233 3 0.38 0.38 0.38 0.53 0.75
0.38 0.38 0.38 0.45 0.59 W14x257 3.27 0.38 0.38 0.38 0.50 0.70
0.38 0.38 0.38 0.42 0.55 W14x283 3.57 0.38 0.38 0.38 0.46 0.65
0.38 0.38 0.38 0.39 0.51 W14x311 3.88 0.38 0.38 0.38 0.43 0.61
0.38 0.38 0.38 0.38 0.47 W14x342 4.21 0.38 0.38 0.38 0.40 0.56
0.38 0.38 0.38 0.38 0.45 W14x370 4.51 0.38 0.38 0.38 0.38 0.53
0.38 0.38 0.38 0.38 0.42 W14x398 4.8 0.38 0.38 0.38 0.38 0.50
0.38 0.38 0.38 0.38 0.40 W14x426 5.09 0.38 0.38 0.38 0.38 0.48
0.38 0.38 0.38 0.38 0.38 W14x455 5.38 0.38 0.38 0.38 0.38 0.45
0.38 0.38 0.38 0.38 0.38 W14x500 5.82 0.38 0.38 0.38 0.38 0.42
0.38 0.38 0.38 0.38 0.38 W14x550 6.3 0.38 0.38 0.38 0.38 0.39
0.38 0.38 0.38 0.38 0.38 W14x605 6.8 0.38 0.38 0.38 0.38 0.38
0.46 0.68 0.99 1.52 1.98 W16x26 0.55 0.46 0.68 0.99 1.67 2.36
0.42 0.63 0.91 1.40 1.82 W16x31 0.65 0.42 0.63 0.91 1.54 2.17
0.41 0.61 0.88 1.36 1.76 W16x36 0.69 0.41 0.61 0.88 1.49 2.10
0.39 0.58 0.84 1.29 1.67 W16x40 0.76 0.39 0.58 0.84 1.42 1.99
0.38 0.54 0.78 1.21 1.57 W16x45 0.85 0.38 0.54 0.78 1.33 1.87
0.38 0.51 0.74 1.14 1.48 W16x50 0.94 0.38 0.51 0.74 1.25 1.76
0.38 0.47 0.68 1.05 1.36 W16x67 1.07 0.38 0.47 0.68 1.15 1.62
0.38 0.47 0.68 1.05 1.36 W16x77 1.07 0.38 0.47 0.68 1.15 1.62
0.38 0.43 0.63 0.96 1.25 W16x89 1.22 0.38 0.43 0.63 1.06 1.49
0.38 0.38 0.53 0.81 1.05 W16x100 1.56 0.38 0.38 0.53 0.89 1.26
0.42 0.63 0.90 1.39 1.81 W18x35 0.66 0.42 0.63 0.90 1.53 2.15
0.39 0.58 0.84 1.29 1.67 W18x40 0.76 0.39 0.58 0.84 1.42 1.99
0.38 0.54 0.78 1.20 1.56 W18x46 0.86 0.38 0.54 0.78 1.32 1.86
0.38 0.54 0.77 1.19 1.55 W18x50 0.87 0.38 0.54 0.77 1.31 1.85
0.38 0.51 0.73 1.13 1.47 W18x55 0.95 0.38 0.51 0.73 1.24 1.75
0.38 0.48 0.70 1.07 1.40 W18x60 1.03 0.38 0.48 0.70 1.18 1.66
0.38 0.46 0.67 1.02 1.33 W18x65 1.11 0.38 0.46 0.67 1.13 1.59
0.38 0.44 0.63 0.97 1.26 W18x71 1.21 0.38 0.44 0.63 1.06 1.50
0.38 0.46 0.67 1.02 1.33 W18x76 1.11 0.38 0.46 0.67 1.13 1.59
0.38 0.43 0.62 0.95 1.24 W18x88 1.24 0.38 0.43 0.62 1.05 1.47
0.38 0.40 0.57 0.88 1.14 W18x97 1.39 0.38 0.40 0.57 0.97 1.36
0.38 0.38 0.54 0.83 1.07 W18x106 1.52 0.38 0.38 0.54 0.91 1.28
0.38 0.38 0.50 0.77 1.00 W18x119 1.68 0.38 0.38 0.50 0.84 1.19
0.39 0.59 0.86 1.32 1.71 W21x44 0.73 0.39 0.59 0.86 1.45 2.04
0.38 0.55 0.80 1.22 1.59 W21x50 0.83 0.38 0.55 0.80 1.35 1.90
0.38 0.51 0.74 1.14 1.49 W21x57 0.93 0.38 0.51 0.74 1.26 1.77
0.38 0.51 0.74 1.14 1.48 W21x62 0.94 0.38 0.51 0.74 1.25 1.76
0.38 0.48 0.70 1.07 1.40 W21x68 1.03 0.38 0.48 0.70 1.18 1.66
0.38 0.43 0.62 0.95 1.24 W21x83 1.24 0.38 0.43 0.62 1.05 1.47
0.38 0.40 0.57 0.88 1.15 W21x93 1.38 0.38 0.40 0.57 0.97 1.37
0.38 0.42 0.60 0.93 1.20 W21x101 1.29 0.38 0.42 0.60 1.02 1.44
0.38 0.39 0.57 0.87 1.13 W21x111 1.41 0.38 0.39 0.57 0.96 1.35
0.38 0.38 0.53 0.82 1.06 W21x122 1.54 0.38 0.38 0.53 0.90 1.27
0.38 0.38 0.50 0.77 1.01 W21x132 1.66 0.38 0.38 0.50 0.85 1.20
0.38 0.38 0.47 0.72 0.94 W21x147 1.83 0.38 0.38 0.47 0.79 1.12
0.38 0.55 0.80 1.23 1.60 W24x55 0.82 0.38 0.55 0.80 1.36 1.91
0.38 0.52 0.75 1.15 1.50 W24x62 0.92 0.38 0.52 0.75 1.27 1.78
0.38 0.51 0.74 1.14 1.49 W24x68 0.93 0.38 0.51 0.74 1.26 1.77
0.38 0.49 0.70 1.08 1.40 W24x76 1.02 0.38 0.49 0.70 1.19 1.67
0.38 0.46 0.66 1.01 1.32 W24x84 1.13 0.38 0.46 0.66 1.11 1.57
0.38 0.42 0.61 0.94 1.22 W24x94 1.26 0.38 0.42 0.61 1.03 1.46
0.38 0.43 0.63 0.96 1.25 W24x104 1.22 0.38 0.43 0.63 1.06 1.49
0.38 0.40 0.58 0.89 1.16 W24x117 1.36 0.38 0.40 0.58 0.98 1.38
0.38 0.38 0.54 0.83 1.07 W24x131 1.52 0.38 0.38 0.54 0.91 1.28
0.38 0.38 0.50 0.77 1.00 W24x146 1.68 0.38 0.38 0.50 0.84 1.19
0.38 0.38 0.46 0.71 0.93 W24x162 1.85 0.38 0.38 0.46 0.79 1.11
0.38 0.49 0.70 1.08 1.40 W27x84 1.02 0.38 0.49 0.70 1.19 1.67
0.38 0.46 0.66 1.01 1.32 W27x94 1.13 0.38 0.46 0.66 1.11 1.57
0.38 0.43 0.62 0.96 1.24 W27x102 1.23 0.38 0.43 0.62 1.05 1.48
0.38 0.40 0.58 0.89 1.16 W27x114 1.36 0.38 0.40 0.58 0.98 1.38
0.38 0.38 0.53 0.82 1.07 W27x146 1.53 0.38 0.38 0.53 0.90 1.27
0.38 0.38 0.50 0.77 1.00 W27x161 1.68 0.38 0.38 0.50 0.84 1.19
0.38 0.38 0.46 0.71 0.93 W27x178 1.85 0.38 0.38 0.46 0.79 1.11
0.38 0.46 0.67 1.03 1.34 W30x99 1.1 0.38 0.46 0.67 1.13 1.60
0.38 0.44 0.63 0.97 1.26 W30x108 1.2 0.38 0.44 0.63 1.07 1.51
0.38 0.42 0.61 0.93 1.21 W30x116 1.28 0.38 0.42 0.61 1.02 1.44
0.38 0.40 0.58 0.89 1.15 W30x124 1.37 0.38 0.40 0.58 0.98 1.38
0.38 0.38 0.55 0.85 1.10 W30x132 1.46 0.38 0.38 0.55 0.93 1.32
0.38 0.38 0.50 0.77 1.01 W30x173 1.66 0.38 0.38 0.50 0.85 1.20
0.38 0.38 0.47 0.72 0.94 W30x191 1.82 0.38 0.38 0.47 0.80 1.12
0.38 0.38 0.44 0.67 0.88 W30x211 2 0.38 0.38 0.44 0.74 1.04
0.38 0.44 0.64 0.98 1.27 W33x118 1.19 0.38 0.44 0.64 1.08 1.52
0.38 0.41 0.60 0.92 1.19 W33x130 1.31 0.38 0.41 0.60 1.01 1.42
0.38 0.39 0.57 0.87 1.13 W33x141 1.41 0.38 0.39 0.57 0.96 1.35
0.38 0.38 0.54 0.83 1.08 W33x152 1.51 0.38 0.38 0.54 0.91 1.29
0.38 0.38 0.48 0.74 0.96 W33x201 1.78 0.38 0.38 0.48 0.81 1.14
*Thickness applied to beam's lower flange edge shall not be less than 1/4-in.
Design No. J718 - Concrete Floor / Beam Assembly
Minimum Thickness Required on Beam, in.
W4x13 0.65 0.49 0.70 0.91 1.40 2.03
W5x16 0.65 0.49 0.70 0.91 1.40 2.03
W5x19 0.76 0.45 0.64 0.84 1.29 1.87
W6x9 0.39 0.62 0.88 1.15 1.77 2.56
W6x12 0.51 0.55 0.79 1.02 1.58 2.29
W6x16 0.66 0.49 0.69 0.90 1.39 2.01
W6x20 0.67 0.48 0.69 0.90 1.38 2.00
W6x26 0.82 0.43 0.62 0.80 1.23 1.79
W8x10 0.37 0.63 0.90 1.17 1.80 2.62
W8x13 0.47 0.57 0.82 1.06 1.64 2.37
W8x15 0.54 0.54 0.77 1.00 1.54 2.23
W8x18 0.57 0.52 0.75 0.97 1.50 2.17
W8x21 0.66 0.49 0.69 0.90 1.39 2.01
W8x24 0.69 0.47 0.68 0.88 1.36 1.97
W8x28 0.80 0.44 0.63 0.81 1.25 1.81
W8x31 0.79 0.44 0.63 0.82 1.26 1.83
W8x35 0.88 0.41 0.59 0.77 1.18 1.71
W8x40 1.00 0.38 0.55 0.71 1.09 1.59
W8x48 1.18 0.38 0.49 0.64 0.98 1.43
W8x58 1.41 0.38 0.44 0.57 0.87 1.26
W8x67 1.61 0.38 0.40 0.51 0.79 1.15
W10x12 0.38 0.63 0.89 1.16 1.79 2.59
W10x15 0.48 0.57 0.81 1.05 1.62 2.35
W10x17 0.54 0.54 0.77 1.00 1.54 2.23
W10x19 0.59 0.51 0.74 0.96 1.47 2.13
W10x22 0.59 0.51 0.74 0.96 1.47 2.13
W10x26 0.69 0.47 0.68 0.88 1.36 1.97
W10x30 0.79 0.44 0.63 0.82 1.26 1.83
W10x33 0.77 0.45 0.64 0.83 1.28 1.85
W10x39 0.90 0.41 0.58 0.76 1.17 1.69
W10x46 1.03 0.38 0.54 0.70 1.07 1.56
W10x49 0.99 0.39 0.55 0.72 1.10 1.60
W10x54 1.09 0.38 0.52 0.67 1.04 1.50
W10x60 1.20 0.38 0.49 0.63 0.97 1.41
W10x68 1.36 0.38 0.45 0.58 0.89 1.29
W10x77 1.52 0.38 0.41 0.54 0.83 1.20
W10x88 1.72 0.38 0.38 0.49 0.75 1.09
W10x100 1.93 0.38 0.38 0.45 0.69 1.00
W10x112 2.14 0.38 0.38 0.42 0.64 0.93
W12x14 0.40 0.61 0.88 1.14 1.75 2.54
W12x16 0.45 0.58 0.83 1.08 1.67 2.42
W12x19 0.53 0.54 0.77 1.01 1.55 2.25
W12x22 0.61 0.51 0.72 0.94 1.45 2.10
W12x26 0.60 0.51 0.73 0.95 1.46 2.11
W12x30 0.69 0.47 0.68 0.88 1.36 1.97
W12x35 0.79 0.44 0.63 0.82 1.26 1.83
W12x40 0.85 0.42 0.60 0.78 1.21 1.75
W12x45 0.95 0.40 0.56 0.73 1.13 1.64
W12x50 1.04 0.38 0.53 0.69 1.07 1.55
W12x53 0.99 0.39 0.55 0.72 1.10 1.60
W12x54 1.04 0.38 0.53 0.69 1.07 1.55
W12x58 1.08 0.38 0.52 0.68 1.04 1.51
W12x65 1.09 0.38 0.52 0.67 1.04 1.50
W12x72 1.20 0.38 0.49 0.63 0.97 1.41
W12x79 1.32 0.38 0.46 0.59 0.91 1.32
W12x87 1.44 0.38 0.43 0.56 0.86 1.24
W12x96 1.57 0.38 0.40 0.52 0.81 1.17
W12x106 1.73 0.38 0.38 0.49 0.75 1.09
W12x120 1.94 0.38 0.38 0.45 0.69 1.00
W12x136 2.17 0.38 0.38 0.41 0.63 0.92
W12x152 2.40 0.38 0.38 0.38 0.58 0.85
W12x170 2.66 0.38 0.38 0.38 0.54 0.78
W12x190 2.93 0.38 0.38 0.38 0.50 0.72
W12x210 3.21 0.38 0.38 0.38 0.46 0.67
W12x230 3.47 0.38 0.38 0.38 0.43 0.62
W12x262 3.76 0.38 0.38 0.38 0.40 0.58
W12x279 4.10 0.38 0.38 0.38 0.38 0.54
W12x305 4.41 0.38 0.38 0.38 0.38 0.51
W12x336 4.78 0.38 0.38 0.38 0.38 0.47
W14x22 0.52 0.55 0.78 1.02 1.56 2.27
W14x26 0.61 0.51 0.72 0.94 1.45 2.10
W14x30 0.63 0.50 0.71 0.92 1.42 2.06
W14x34 0.71 0.47 0.67 0.87 1.34 1.94
W14x38 0.79 0.44 0.63 0.82 1.26 1.83
W14x43 0.85 0.42 0.60 0.78 1.21 1.75
W14x48 0.94 0.40 0.57 0.74 1.14 1.65
W14x53 1.03 0.38 0.54 0.70 1.07 1.56
W14x61 1.07 0.38 0.52 0.68 1.05 1.52
W14x68 1.19 0.38 0.49 0.64 0.98 1.42
W14x74 1.28 0.38 0.47 0.61 0.93 1.35
W14x82 1.41 0.38 0.44 0.57 0.87 1.26
W14x90 1.27 0.38 0.47 0.61 0.94 1.36
W14x99 1.39 0.38 0.44 0.57 0.88 1.28
W14x109 1.53 0.38 0.41 0.53 0.82 1.19
W14x120 1.67 0.38 0.39 0.50 0.77 1.12
W14x132 1.83 0.38 0.38 0.47 0.72 1.04
W14x145 1.94 0.38 0.38 0.45 0.69 1.00
W14x159 2.11 0.38 0.38 0.42 0.65 0.94
W14x176 2.25 0.38 0.38 0.40 0.61 0.89
W14x193 2.32 0.38 0.38 0.39 0.60 0.87
W14x211 2.74 0.38 0.38 0.38 0.52 0.76
W14x233 3.00 0.38 0.38 0.38 0.49 0.70
W14x257 3.27 0.38 0.38 0.38 0.45 0.66
W14x283 3.57 0.38 0.38 0.38 0.42 0.61
W14x311 3.88 0.38 0.38 0.38 0.39 0.57
W14x342 4.21 0.38 0.38 0.38 0.38 0.53
W14x370 4.51 0.38 0.38 0.38 0.38 0.50
W14x398 4.80 0.38 0.38 0.38 0.38 0.47
W14x426 5.09 0.38 0.38 0.38 0.38 0.45
W14x455 5.38 0.38 0.38 0.38 0.38 0.42
W14x500 5.82 0.38 0.38 0.38 0.38 0.40
W14x550 6.30 0.38 0.38 0.38 0.38 0.38
W14x605 6.80 0.38 0.38 0.38 0.38 0.38
W16x26 0.55 0.53 0.76 0.99 1.52 2.21
W16x31 0.65 0.49 0.70 0.91 1.40 2.03
W16x36 0.69 0.47 0.68 0.88 1.36 1.97
W16x40 0.76 0.45 0.64 0.84 1.29 1.87
W16x45 0.85 0.42 0.60 0.78 1.21 1.75
W16x50 0.94 0.40 0.57 0.74 1.14 1.65
W16x67 1.07 0.38 0.52 0.68 1.05 1.52
W16x77 1.07 0.38 0.52 0.68 1.05 1.52
W16x89 1.22 0.38 0.48 0.63 0.96 1.39
W16x100 1.56 0.38 0.41 0.53 0.81 1.17
W18x35 0.66 0.49 0.69 0.90 1.39 2.01
W18x40 0.76 0.45 0.64 0.84 1.29 1.87
W18x46 0.86 0.42 0.60 0.78 1.20 1.74
W18x50 0.87 0.42 0.60 0.77 1.19 1.73
W18x55 0.95 0.40 0.56 0.73 1.13 1.64
W18x60 1.03 0.38 0.54 0.70 1.07 1.56
W18x65 1.11 0.38 0.51 0.67 1.02 1.48
W18x71 1.21 0.38 0.48 0.63 0.97 1.40
W18x76 1.11 0.38 0.51 0.67 1.02 1.48
W18x88 1.24 0.38 0.48 0.62 0.95 1.38
W18x97 1.39 0.38 0.44 0.57 0.88 1.28
W18x106 1.52 0.38 0.41 0.54 0.83 1.20
W18x119 1.68 0.38 0.38 0.50 0.77 1.11
W21x44 0.73 0.46 0.66 0.86 1.32 1.91
W21x50 0.83 0.43 0.61 0.80 1.22 1.77
W21x57 0.93 0.40 0.57 0.74 1.14 1.66
W21x62 0.94 0.40 0.57 0.74 1.14 1.65
W21x68 1.03 0.38 0.54 0.70 1.07 1.56
W21x83 1.24 0.38 0.48 0.62 0.95 1.38
W21x93 1.38 0.38 0.44 0.57 0.88 1.28
W21x101 1.29 0.38 0.46 0.60 0.93 1.34
W21x111 1.41 0.38 0.44 0.57 0.87 1.26
Member W/D
1 Hr 1.5 Hr 2 Hr 3 Hr 4 Hr
W21x122 1.54 0.38 0.41 0.53 0.82 1.19
W21x132 1.66 0.38 0.39 0.50 0.77 1.12
W21x147 1.83 0.38 0.38 0.47 0.72 1.04
W24x55 0.82 0.43 0.62 0.80 1.23 1.79
W24x62 0.92 0.40 0.58 0.75 1.15 1.67
W24x68 0.93 0.40 0.57 0.74 1.14 1.66
W24x76 1.02 0.38 0.54 0.70 1.08 1.57
W24x84 1.13 0.38 0.51 0.66 1.01 1.47
W24x94 1.26 0.38 0.47 0.61 0.94 1.36
W24x104 1.22 0.38 0.48 0.63 0.96 1.39
W24x117 1.36 0.38 0.45 0.58 0.89 1.29
W24x131 1.52 0.38 0.41 0.54 0.83 1.20
W24x146 1.68 0.38 0.38 0.50 0.77 1.11
W24x162 1.85 0.38 0.38 0.46 0.71 1.04
W27x84 1.02 0.38 0.54 0.70 1.08 1.57
W27x94 1.13 0.38 0.51 0.66 1.01 1.47
W27x102 1.23 0.38 0.48 0.62 0.96 1.39
W27x114 1.36 0.38 0.45 0.58 0.89 1.29
W27x146 1.53 0.38 0.41 0.53 0.82 1.19
W27x161 1.68 0.38 0.38 0.50 0.77 1.11
W27x178 1.85 0.38 0.38 0.46 0.71 1.04
W30x99 1.10 0.38 0.51 0.67 1.03 1.49
W30x108 1.20 0.38 0.49 0.63 0.97 1.41
W30x116 1.28 0.38 0.47 0.61 0.93 1.35
W30x124 1.37 0.38 0.44 0.58 0.89 1.29
W30x132 1.46 0.38 0.42 0.55 0.85 1.23
W30x173 1.66 0.38 0.39 0.50 0.77 1.12
W30x191 1.82 0.38 0.38 0.47 0.72 1.05
W30x211 2.00 0.38 0.38 0.44 0.67 0.98
W33x118 1.19 0.38 0.49 0.64 0.98 1.42
W33x130 1.31 0.38 0.46 0.60 0.92 1.33
W33x141 1.41 0.38 0.44 0.57 0.87 1.26
W33x152 1.51 0.38 0.41 0.54 0.83 1.20
W33x201 1.78 0.38 0.38 0.48 0.74 1.07
Design No. J718 - Beam / Slab Floor Assembly

Minimum Thickness, in., Required on Beam When Lower Flange Edge Thickness is Reduced by One-Half *
W4x13 0.65 0.56 0.84 1.12 1.68 2.38
W5x16 0.65 0.56 0.84 1.12 1.68 2.38
W5x19 0.76 0.51 0.77 1.03 1.54 2.19
W6x9 0.39 0.71 1.06 1.41 2.12 3.01
W6x12 0.51 0.63 0.95 1.26 1.89 2.68
W6x16 0.66 0.56 0.83 1.11 1.67 2.36
W6x20 0.67 0.55 0.83 1.10 1.65 2.34
W6x26 0.82 0.49 0.74 0.99 1.48 2.10
W8x10 0.37 0.72 1.08 1.44 2.16 3.07
W8x13 0.47 0.65 0.98 1.31 1.96 2.78
W8x15 0.54 0.61 0.92 1.23 1.84 2.61
W8x18 0.57 0.60 0.90 1.20 1.79 2.54
W8x21 0.66 0.56 0.83 1.11 1.67 2.36
W8x24 0.69 0.54 0.81 1.09 1.63 2.31
W8x28 0.80 0.50 0.75 1.00 1.50 2.13
W8x31 0.79 0.50 0.76 1.01 1.51 2.14
W8x35 0.88 0.47 0.71 0.95 1.42 2.01
W8x40 1.00 0.44 0.66 0.88 1.31 1.86
W8x48 1.18 0.39 0.59 0.79 1.18 1.67
W8x58 1.41 0.38 0.52 0.70 1.04 1.48
W8x67 1.61 0.38 0.48 0.63 0.95 1.35
W10x12 0.38 0.71 1.07 1.43 2.14 3.04
W10x15 0.48 0.65 0.97 1.30 1.94 2.75
W10x17 0.54 0.61 0.92 1.23 1.84 2.61
W10x19 0.59 0.59 0.88 1.18 1.76 2.50
W10x22 0.59 0.59 0.88 1.18 1.76 2.50
W10x26 0.69 0.54 0.81 1.09 1.63 2.31
W10x30 0.79 0.50 0.76 1.01 1.51 2.14
W10x33 0.77 0.51 0.77 1.02 1.53 2.17
W10x39 0.90 0.47 0.70 0.93 1.40 1.98
W10x46 1.03 0.43 0.64 0.86 1.29 1.83
W10x49 0.99 0.44 0.66 0.88 1.32 1.87
W10x54 1.09 0.41 0.62 0.83 1.24 1.76
W10x60 1.20 0.39 0.58 0.78 1.17 1.65
W10x68 1.36 0.38 0.54 0.71 1.07 1.52
W10x77 1.52 0.38 0.50 0.66 0.99 1.40
W10x88 1.72 0.38 0.45 0.60 0.91 1.28
W10x100 1.93 0.38 0.42 0.55 0.83 1.18
W10x112 2.14 0.38 0.38 0.51 0.77 1.09
W12x14 0.40 0.70 1.05 1.40 2.10 2.98
W12x16 0.45 0.67 1.00 1.33 2.00 2.83
W12x19 0.53 0.62 0.93 1.24 1.86 2.63
W12x22 0.61 0.58 0.87 1.16 1.74 2.46
W12x26 0.60 0.58 0.88 1.17 1.75 2.48

Member W/D 1 Hr 1.5 Hr 2 Hr 3.500 4 Hr
W12x30 0.69 0.54 0.81 1.09 1.63 2.31
W12x35 0.79 0.50 0.76 1.01 1.51 2.14
W12x40 0.85 0.48 0.72 0.97 1.45 2.05
W12x45 0.95 0.45 0.68 0.90 1.35 1.92
W12x50 1.04 0.43 0.64 0.85 1.28 1.81
W12x53 0.99 0.44 0.66 0.88 1.32 1.87
W12x54 1.04 0.43 0.64 0.85 1.28 1.81
W12x58 1.08 0.42 0.63 0.83 1.25 1.77
W12x65 1.09 0.41 0.62 0.83 1.24 1.76
W12x72 1.20 0.39 0.58 0.78 1.17 1.65
W12x79 1.32 0.38 0.55 0.73 1.09 1.55
W12x87 1.44 0.38 0.51 0.69 1.03 1.46
W12x96 1.57 0.38 0.48 0.65 0.97 1.37
W12x106 1.73 0.38 0.45 0.60 0.90 1.28
W12x120 1.94 0.38 0.41 0.55 0.83 1.17
W12x136 2.17 0.38 0.38 0.51 0.76 1.07
W12x152 2.40 0.38 0.38 0.47 0.70 0.99
W12x170 2.66 0.38 0.38 0.43 0.64 0.91
W12x190 2.93 0.38 0.38 0.40 0.59 0.84
W12x210 3.21 0.38 0.38 0.38 0.55 0.78
W12x230 3.47 0.38 0.38 0.38 0.52 0.73
W12x262 3.76 0.38 0.38 0.38 0.48 0.68
W12x279 4.10 0.38 0.38 0.38 0.45 0.63
W12x305 4.41 0.38 0.38 0.38 0.42 0.59
W12x336 4.78 0.38 0.38 0.38 0.39 0.55
W14x22 0.52 0.63 0.94 1.25 1.88 2.66
W14x26 0.61 0.58 0.87 1.16 1.74 2.46
W14x30 0.63 0.57 0.85 1.14 1.71 2.42
W14x34 0.71 0.53 0.80 1.07 1.60 2.27
W14x38 0.79 0.50 0.76 1.01 1.51 2.14
W14x43 0.85 0.48 0.72 0.97 1.45 2.05
W14x48 0.94 0.45 0.68 0.91 1.36 1.93
W14x53 1.03 0.43 0.64 0.86 1.29 1.83
W14x61 1.07 0.42 0.63 0.84 1.26 1.78
W14x68 1.19 0.39 0.59 0.78 1.17 1.66
W14x74 1.28 0.38 0.56 0.74 1.12 1.58
W14x82 1.41 0.38 0.52 0.70 1.04 1.48
W14x90 1.27 0.38 0.56 0.75 1.12 1.59
W14x99 1.39 0.38 0.53 0.70 1.06 1.49
W14x109 1.53 0.38 0.49 0.66 0.99 1.40
W14x120 1.67 0.38 0.46 0.62 0.93 1.31
W14x132 1.83 0.38 0.43 0.58 0.86 1.22
W14x145 1.94 0.38 0.41 0.55 0.83 1.17
W14x159 2.11 0.38 0.39 0.52 0.77 1.10

W14x176 2.25 0.38 0.38 0.49 0.74 1.04
W14x193 2.32 0.38 0.38 0.48 0.72 1.02
W14x211 2.74 0.38 0.38 0.42 0.63 0.89
W14x233 3.00 0.38 0.38 0.39 0.58 0.83
W14x257 3.27 0.38 0.38 0.38 0.54 0.77
W14x283 3.57 0.38 0.38 0.38 0.50 0.71
W14x311 3.88 0.38 0.38 0.38 0.47 0.66
W14x342 4.21 0.38 0.38 0.38 0.44 0.62
W14x370 4.51 0.38 0.38 0.38 0.41 0.58
W14x398 4.80 0.38 0.38 0.38 0.39 0.55
W14x426 5.09 0.38 0.38 0.38 0.38 0.52
W14x455 5.38 0.38 0.38 0.38 0.38 0.50
W14x500 5.82 0.38 0.38 0.38 0.38 0.46
W14x550 6.30 0.38 0.38 0.38 0.38 0.43
W14x605 6.80 0.38 0.38 0.38 0.38 0.40
W16x26 0.55 0.61 0.91 1.22 1.83 2.59
W16x31 0.65 0.56 0.84 1.12 1.68 2.38
W16x36 0.69 0.54 0.81 1.09 1.63 2.31
W16x40 0.76 0.51 0.77 1.03 1.54 2.19
W16x45 0.85 0.48 0.72 0.97 1.45 2.05
W16x50 0.94 0.45 0.68 0.91 1.36 1.93
W16x67 1.07 0.42 0.63 0.84 1.26 1.78
W16x77 1.07 0.42 0.63 0.84 1.26 1.78
W16x89 1.22 0.38 0.58 0.77 1.15 1.63
W16x100 1.56 0.38 0.49 0.65 0.97 1.38
W18x35 0.66 0.56 0.83 1.11 1.67 2.36
W18x40 0.76 0.51 0.77 1.03 1.54 2.19
W18x46 0.86 0.48 0.72 0.96 1.44 2.04
W18x50 0.87 0.48 0.71 0.95 1.43 2.02
W18x55 0.95 0.45 0.68 0.90 1.35 1.92
W18x60 1.03 0.43 0.64 0.86 1.29 1.83
W18x65 1.11 0.41 0.61 0.82 1.23 1.74
W18x71 1.21 0.39 0.58 0.77 1.16 1.64
W18x76 1.11 0.41 0.61 0.82 1.23 1.74
W18x88 1.24 0.38 0.57 0.76 1.14 1.62
W18x97 1.39 0.38 0.53 0.70 1.06 1.49
W18x106 1.52 0.38 0.50 0.66 0.99 1.40
W18x119 1.68 0.38 0.46 0.61 0.92 1.30
W21x44 0.73 0.53 0.79 1.05 1.58 2.24
W21x50 0.83 0.49 0.73 0.98 1.47 2.08
W21x57 0.93 0.46 0.69 0.92 1.37 1.94
W21x62 0.94 0.45 0.68 0.91 1.36 1.93
W21x68 1.03 0.43 0.64 0.86 1.29 1.83
W21x83 1.24 0.38 0.57 0.76 1.14 1.62
1 Hr 1.5 Hr 2 Hr 3 Hr 4 Hr
W21x93 1.38 0.38 0.53 0.71 1.06 1.50
W21x101 1.29 0.38 0.56 0.74 1.11 1.57
W21x111 1.41 0.38 0.52 0.70 1.04 1.48
W21x122 1.54 0.38 0.49 0.65 0.98 1.39
W21x132 1.66 0.38 0.46 0.62 0.93 1.32
W21x147 1.83 0.38 0.43 0.58 0.86 1.22
W24x55 0.82 0.49 0.74 0.99 1.48 2.10
W24x62 0.92 0.46 0.69 0.92 1.38 1.96
W24x68 0.93 0.46 0.69 0.92 1.37 1.94
W24x76 1.02 0.43 0.65 0.86 1.30 1.84
W24x84 1.13 0.40 0.61 0.81 1.21 1.72
W24x94 1.26 0.38 0.56 0.75 1.13 1.60
W24x104 1.22 0.38 0.58 0.77 1.15 1.63
W24x117 1.36 0.38 0.54 0.71 1.07 1.52
W24x131 1.52 0.38 0.50 0.66 0.99 1.40
W24x146 1.68 0.38 0.46 0.61 0.92 1.30
W24x162 1.85 0.38 0.43 0.57 0.86 1.21
W27x84 1.02 0.43 0.65 0.86 1.30 1.84
W27x94 1.13 0.40 0.61 0.81 1.21 1.72
W27x102 1.23 0.38 0.57 0.77 1.15 1.63
W27x114 1.36 0.38 0.54 0.71 1.07 1.52
W27x146 1.53 0.38 0.49 0.66 0.99 1.40
W27x161 1.68 0.38 0.46 0.61 0.92 1.30
W27x178 1.85 0.38 0.43 0.57 0.86 1.21
W30x99 1.10 0.41 0.62 0.82 1.24 1.75
W30x108 1.20 0.39 0.58 0.78 1.17 1.65
W30x116 1.28 0.38 0.56 0.74 1.12 1.58
W30x124 1.37 0.38 0.53 0.71 1.07 1.51
W30x132 1.46 0.38 0.51 0.68 1.02 1.44
W30x173 1.66 0.38 0.46 0.62 0.93 1.32
W30x191 1.82 0.38 0.43 0.58 0.87 1.23
W30x211 2.00 0.38 0.40 0.54 0.81 1.14
W33x118 1.19 0.39 0.59 0.78 1.17 1.66
W33x130 1.31 0.38 0.55 0.73 1.10 1.56
W33x141 1.41 0.38 0.52 0.70 1.04 1.48
W33x152 1.51 0.38 0.50 0.66 1.00 1.41
W33x201 1.78 0.38 0.44 0.59 0.88 1.25
* Thickness applied to beam' s lower flange edge shall be a minimum of 1/4-in.

Design No. P741 - Beam / Roof Assembly
Minimum Thickness, in.
Member W/D 1 Hr 1.5 Hr 2 Hr
W4x13 0.65 0.38 0.63 0.88
W5x16 0.65 0.38 0.63 0.88
W5x19 0.76 0.38 0.58 0.81
W6x9 0.39 0.48 0.80 1.11
W6x12 0.51 0.43 0.71 0.99
W6x16 0.66 0.38 0.63 0.88
W6x20 0.67 0.38 0.62 0.87
W6x26 0.82 0.38 0.55 0.78
W8x10 0.37 0.49 0.81 1.14
W8x13 0.47 0.44 0.74 1.03
W8x15 0.54 0.41 0.69 0.97
W8x18 0.57 0.40 0.67 0.94
W8x21 0.66 0.38 0.63 0.88
W8x24 0.69 0.38 0.61 0.85
W8x28 0.80 0.38 0.56 0.79
W8x31 0.79 0.38 0.57 0.79
W8x35 0.88 0.38 0.53 0.74
W8x40 1.00 0.38 0.49 0.69
W8x48 1.18 0.38 0.44 0.62
W8x58 1.41 0.38 0.39 0.55
W8x67 1.61 0.38 0.38 0.50
W10x12 0.38 0.48 0.80 1.13
W10x15 0.48 0.44 0.73 1.02
W10x17 0.54 0.41 0.69 0.97
W10x19 0.59 0.40 0.66 0.93
W10x22 0.59 0.40 0.66 0.93
W10x26 0.69 0.38 0.61 0.85
W10x30 0.79 0.38 0.57 0.79
W10x33 0.77 0.38 0.57 0.80
W10x39 0.90 0.38 0.53 0.74
W10x46 1.03 0.38 0.48 0.68
W10x49 0.99 0.38 0.50 0.69
W10x54 1.09 0.38 0.47 0.65
W10x60 1.20 0.38 0.44 0.61
W10x68 1.36 0.38 0.40 0.56
W10x77 1.52 0.38 0.38 0.52
W10x88 1.72 0.38 0.38 0.48
W10x100 1.93 0.38 0.38 0.44
W10x112 2.14 0.38 0.38 0.40
W12x14 0.40 0.47 0.79 1.10
W12x16 0.45 0.45 0.75 1.05
W12x19 0.53 0.42 0.70 0.98
W12x22 0.61 0.39 0.65 0.91
W12x26 0.60 0.39 0.66 0.92
W12x30 0.69 0.38 0.61 0.85
W12x35 0.79 0.38 0.57 0.79
W12x40 0.85 0.38 0.54 0.76
W12x45 0.95 0.38 0.51 0.71
W12x50 1.04 0.38 0.48 0.67
W12x53 0.99 0.38 0.50 0.69
W12x54 1.04 0.38 0.48 0.67
W12x58 1.08 0.38 0.47 0.66
W12x65 1.09 0.38 0.47 0.65
W12x72 1.20 0.38 0.44 0.61
W12x79 1.32 0.38 0.41 0.57
W12x87 1.44 0.38 0.39 0.54
W12x96 1.57 0.38 0.38 0.51
W12x106 1.73 0.38 0.38 0.47
W12x120 1.94 0.38 0.38 0.43
W12x136 2.17 0.38 0.38 0.40
W12x152 2.40 0.38 0.38 0.38
W12x170 2.66 0.38 0.38 0.38
W12x190 2.93 0.38 0.38 0.38
W12x210 3.21 0.38 0.38 0.38
W12x230 3.47 0.38 0.38 0.38
W12x262 3.76 0.38 0.38 0.38
W12x279 4.10 0.38 0.38 0.38
W12x305 4.41 0.38 0.38 0.38
W12x336 4.78 0.38 0.38 0.38
W14x22 0.52 0.42 0.70 0.98
W14x26 0.61 0.39 0.65 0.91
W14x30 0.63 0.38 0.64 0.90
W14x34 0.71 0.38 0.60 0.84
W14x38 0.79 0.38 0.57 0.79
W14x43 0.85 0.38 0.54 0.76
W14x48 0.94 0.38 0.51 0.72
W14x53 1.03 0.38 0.48 0.68
W14x61 1.07 0.38 0.47 0.66
W14x68 1.19 0.38 0.44 0.62
W14x74 1.28 0.38 0.42 0.59
W14x82 1.41 0.38 0.39 0.55
W14x90 1.27 0.38 0.42 0.59
W14x99 1.39 0.38 0.40 0.55
W14x109 1.53 0.38 0.38 0.52
W14x120 1.67 0.38 0.38 0.49
W14x132 1.83 0.38 0.38 0.45
W14x145 1.94 0.38 0.38 0.43
W14x159 2.11 0.38 0.38 0.41
W14x176 2.25 0.38 0.38 0.39
W14x193 2.32 0.38 0.38 0.38
W14x211 2.74 0.38 0.38 0.38
W14x233 3.00 0.38 0.38 0.38
W14x257 3.27 0.38 0.38 0.38
W14x283 3.57 0.38 0.38 0.38
W14x311 3.88 0.38 0.38 0.38
W14x342 4.21 0.38 0.38 0.38
W14x370 4.51 0.38 0.38 0.38
W14x398 4.80 0.38 0.38 0.38
W14x426 5.09 0.38 0.38 0.38
W14x455 5.38 0.38 0.38 0.38
W14x500 5.82 0.38 0.38 0.38
W14x550 6.30 0.38 0.38 0.38
W14x605 6.80 0.38 0.38 0.38
W16x26 0.55 0.41 0.68 0.96
W16x31 0.65 0.38 0.63 0.88
W16x36 0.69 0.38 0.61 0.85
W16x40 0.76 0.38 0.58 0.81
W16x45 0.85 0.38 0.54 0.76
W16x50 0.94 0.38 0.51 0.72
W16x67 1.07 0.38 0.47 0.66
W16x77 1.07 0.38 0.47 0.66
W16x89 1.22 0.38 0.43 0.61
W16x100 1.56 0.38 0.38 0.51
W18x35 0.66 0.38 0.63 0.88
W18x40 0.76 0.38 0.58 0.81
W18x46 0.86 0.38 0.54 0.76
W18x50 0.87 0.38 0.54 0.75
W18x55 0.95 0.38 0.51 0.71
W18x60 1.03 0.38 0.48 0.68
W18x65 1.11 0.38 0.46 0.64
W18x71 1.21 0.38 0.44 0.61
W18x76 1.11 0.38 0.46 0.64
W18x88 1.24 0.38 0.43 0.60
W18x97 1.39 0.38 0.40 0.55
W18x106 1.52 0.38 0.38 0.52
W18x119 1.68 0.38 0.38 0.48
W21x44 0.73 0.38 0.59 0.83
W21x50 0.83 0.38 0.55 0.77
W21x57 0.93 0.38 0.51 0.72
W21x62 0.94 0.38 0.51 0.72
W21x68 1.03 0.38 0.48 0.68
W21x83 1.24 0.38 0.43 0.60
W21x93 1.38 0.38 0.40 0.56
W21x101 1.29 0.38 0.42 0.58
W21x111 1.41 0.38 0.39 0.55
W21x122 1.54 0.38 0.38 0.52
W21x132 1.66 0.38 0.38 0.49
W21x147 1.83 0.38 0.38 0.45
W24x55 0.82 0.38 0.55 0.78
W24x62 0.92 0.38 0.52 0.73
W24x68 0.93 0.38 0.51 0.72
W24x76 1.02 0.38 0.49 0.68
W24x84 1.13 0.38 0.46 0.64
W24x94 1.26 0.38 0.42 0.59
W24x104 1.22 0.38 0.43 0.61
W24x117 1.36 0.38 0.40 0.56
W24x131 1.52 0.38 0.38 0.52
W24x146 1.68 0.38 0.38 0.48
W24x162 1.85 0.38 0.38 0.45
W27x84 1.02 0.38 0.49 0.68
W27x94 1.13 0.38 0.46 0.64
W27x102 1.23 0.38 0.43 0.60
W27x114 1.36 0.38 0.40 0.56
W27x146 1.53 0.38 0.38 0.52
W27x161 1.68 0.38 0.38 0.48
W27x178 1.85 0.38 0.38 0.45
W30x99 1.10 0.38 0.46 0.65
W30x108 1.20 0.38 0.44 0.61
W30x116 1.28 0.38 0.42 0.59
W30x124 1.37 0.38 0.40 0.56
W30x132 1.46 0.38 0.38 0.54
W30x173 1.66 0.38 0.38 0.49
W30x191 1.82 0.38 0.38 0.46
W30x211 2.00 0.38 0.38 0.42
W33x118 1.19 0.38 0.44 0.62
W33x130 1.31 0.38 0.41 0.58
W33x141 1.41 0.38 0.39 0.55
W33x152 1.51 0.38 0.38 0.52
W33x201 1.78 0.38 0.38 0.46
W4x13 0.65 0.50 0.82 1.13
W5x16 0.65 0.50 0.82 1.13
W5x19 0.76 0.46 0.75 1.04
W6x9 0.39 0.64 1.03 1.43
W6x12 0.51 0.57 0.92 1.28
W6x16 0.66 0.50 0.81 1.13
W6x20 0.67 0.50 0.81 1.12
W6x26 0.82 0.44 0.72 1.00
W8x10 0.37 0.65 1.06 1.46
W8x13 0.47 0.59 0.96 1.32
W8x15 0.54 0.55 0.90 1.24
W8x18 0.57 0.54 0.88 1.21
W8x21 0.66 0.50 0.81 1.13
W8x24 0.69 0.49 0.79 1.10
W8x28 0.80 0.45 0.73 1.01
W8x31 0.79 0.45 0.74 1.02
W8x35 0.88 0.43 0.69 0.96
W8x40 1.00 0.39 0.64 0.89
W8x48 1.18 0.38 0.58 0.80
W8x58 1.41 0.38 0.51 0.71
W8x67 1.61 0.38 0.46 0.64
W10x12 0.38 0.64 1.04 1.45
W10x15 0.48 0.58 0.95 1.31
W10x17 0.54 0.55 0.90 1.24
W10x19 0.59 0.53 0.86 1.19
W10x22 0.59 0.53 0.86 1.19
W10x26 0.69 0.49 0.79 1.10
W10x30 0.79 0.45 0.74 1.02
W10x33 0.77 0.46 0.75 1.03
W10x39 0.90 0.42 0.68 0.95
W10x46 1.03 0.39 0.63 0.87
W10x49 0.99 0.40 0.64 0.89
W10x54 1.09 0.38 0.61 0.84
W10x60 1.20 0.38 0.57 0.79
W10x68 1.36 0.38 0.52 0.72
W10x77 1.52 0.38 0.48 0.67
W10x88 1.72 0.38 0.44 0.61
W10x100 1.93 0.38 0.40 0.56
W10x112 2.14 0.38 0.38 0.52
W12x14 0.40 0.63 1.02 1.42
W12x16 0.45 0.60 0.98 1.35
W12x19 0.53 0.56 0.91 1.25
W12x22 0.61 0.52 0.85 1.17
W12x26 0.60 0.53 0.85 1.18
W12x30 0.69 0.49 0.79 1.10
W12x35 0.79 0.45 0.74 1.02
W12x40 0.85 0.43 0.71 0.98
W12x45 0.95 0.41 0.66 0.91
W12x50 1.04 0.38 0.62 0.86
W12x53 0.99 0.40 0.64 0.89
W12x54 1.04 0.38 0.62 0.86
W12x58 1.08 0.38 0.61 0.84
W12x65 1.09 0.38 0.61 0.84
W12x72 1.20 0.38 0.57 0.79
W12x79 1.32 0.38 0.53 0.74
W12x87 1.44 0.38 0.50 0.69
W12x96 1.57 0.38 0.47 0.65
W12x106 1.73 0.38 0.44 0.61
W12x120 1.94 0.38 0.40 0.56
W12x136 2.17 0.38 0.38 0.51
W12x152 2.40 0.38 0.38 0.47
W12x170 2.66 0.38 0.38 0.43
W12x190 2.93 0.38 0.38 0.40
W12x210 3.21 0.38 0.38 0.38
W12x230 3.47 0.38 0.38 0.38
W12x262 3.76 0.38 0.38 0.38
W12x279 4.10 0.38 0.38 0.38
W12x305 4.41 0.38 0.38 0.38
W12x336 4.78 0.38 0.38 0.38
W14x22 0.52 0.56 0.91 1.27
W14x26 0.61 0.52 0.85 1.17
W14x30 0.63 0.51 0.83 1.15
W14x34 0.71 0.48 0.78 1.08
W14x38 0.79 0.45 0.74 1.02
W14x43 0.85 0.43 0.71 0.98
W14x48 0.94 0.41 0.66 0.92
W14x53 1.03 0.39 0.63 0.87
W14x61 1.07 0.38 0.61 0.85
W14x68 1.19 0.38 0.57 0.79
W14x74 1.28 0.38 0.54 0.75
W14x82 1.41 0.38 0.51 0.71
W14x90 1.27 0.38 0.55 0.76
W14x99 1.39 0.38 0.51 0.71
W14x109 1.53 0.38 0.48 0.67
W14x120 1.67 0.38 0.45 0.62
W14x132 1.83 0.38 0.42 0.58
W14x145 1.94 0.38 0.40 0.56
W14x159 2.11 0.38 0.38 0.52
W14x176 2.25 0.38 0.38 0.50
W14x193 2.32 0.38 0.38 0.49
W14x211 2.74 0.38 0.38 0.42
W14x233 3.00 0.38 0.38 0.39
W14x257 3.27 0.38 0.38 0.38
W14x283 3.57 0.38 0.38 0.38
W14x311 3.88 0.38 0.38 0.38
W14x342 4.21 0.38 0.38 0.38
W14x370 4.51 0.38 0.38 0.38
W14x398 4.80 0.38 0.38 0.38
W14x426 5.09 0.38 0.38 0.38
W14x455 5.38 0.38 0.38 0.38
W14x500 5.82 0.38 0.38 0.38
W14x550 6.30 0.38 0.38 0.38
W14x605 6.80 0.38 0.38 0.38
W16x26 0.55 0.55 0.89 1.23
W16x31 0.65 0.50 0.82 1.13
W16x36 0.69 0.49 0.79 1.10
W16x40 0.76 0.46 0.75 1.04
W16x45 0.85 0.43 0.71 0.98
W16x50 0.94 0.41 0.66 0.92
W16x67 1.07 0.38 0.61 0.85
W16x77 1.07 0.38 0.61 0.85
W16x89 1.22 0.38 0.56 0.78
W16x100 1.56 0.38 0.47 0.66
W18x35 0.66 0.50 0.81 1.13
W18x40 0.76 0.46 0.75 1.04
W18x46 0.86 0.43 0.70 0.97
W18x50 0.87 0.43 0.70 0.96
W18x55 0.95 0.41 0.66 0.91
W18x60 1.03 0.39 0.63 0.87
W18x65 1.11 0.38 0.60 0.83
W18x71 1.21 0.38 0.57 0.78
W18x76 1.11 0.38 0.60 0.83
W18x88 1.24 0.38 0.56 0.77
W18x97 1.39 0.38 0.51 0.71
W18x106 1.52 0.38 0.48 0.67
W18x119 1.68 0.38 0.45 0.62
W21x44 0.73 0.47 0.77 1.07
W21x50 0.83 0.44 0.72 0.99
W21x57 0.93 0.41 0.67 0.93
W21x62 0.94 0.41 0.66 0.92
W21x68 1.03 0.39 0.63 0.87
W21x83 1.24 0.38 0.56 0.77
W21x93 1.38 0.38 0.52 0.72
W21x101 1.29 0.38 0.54 0.75
W21x111 1.41 0.38 0.51 0.71
W21x122 1.54 0.38 0.48 0.66
W21x132 1.66 0.38 0.45 0.63
W21x147 1.83 0.38 0.42 0.58
W24x55 0.82 0.44 0.72 1.00
W24x62 0.92 0.41 0.67 0.93
W24x68 0.93 0.41 0.67 0.93
W24x76 1.02 0.39 0.63 0.88
W24x84 1.13 0.38 0.59 0.82
W24x94 1.26 0.38 0.55 0.76
W24x104 1.22 0.38 0.56 0.78
W24x117 1.36 0.38 0.52 0.72
W24x131 1.52 0.38 0.48 0.67
W24x146 1.68 0.38 0.45 0.62
W24x162 1.85 0.38 0.42 0.58
W27x84 1.02 0.39 0.63 0.88
W27x94 1.13 0.38 0.59 0.82
W27x102 1.23 0.38 0.56 0.77
W27x114 1.36 0.38 0.52 0.72
W27x146 1.53 0.38 0.48 0.67
W27x161 1.68 0.38 0.45 0.62
W27x178 1.85 0.38 0.42 0.58
W30x99 1.10 0.38 0.60 0.83
W30x108 1.20 0.38 0.57 0.79
W30x116 1.28 0.38 0.54 0.75
W30x124 1.37 0.38 0.52 0.72
W30x132 1.46 0.38 0.50 0.69
W30x173 1.66 0.38 0.45 0.63
W30x191 1.82 0.38 0.42 0.59
W30x211 2.00 0.38 0.39 0.55
W33x118 1.19 0.38 0.57 0.79
W33x130 1.31 0.38 0.54 0.74
W33x141 1.41 0.38 0.51 0.71
W33x152 1.51 0.38 0.49 0.67
W33x201 1.78 0.38 0.43 0.60
* Thickness applied to beam' s lower flange edge shall be a minimum of 1/4-in.

Full Flange Tip Thicknesses ( NWC Full Flange Tip Thicknesses ( LWC
0.56 0.70 0.84 1.26 1.68 W4x13 0.65 0.56 0.77 0.98 1.40 1.82
0.56 0.70 0.84 1.26 1.68 W6x16 0.65 0.56 0.77 0.98 1.40 1.82
0.51 0.64 0.77 1.16 1.54 W6x19 0.76 0.51 0.71 0.90 1.29 1.67
0.71 0.88 1.06 1.59 2.12 W6x9 0.39 0.71 0.97 1.24 1.77 2.30
0.63 0.79 0.95 1.42 1.89 W6x12 0.51 0.63 0.87 1.10 1.58 2.05
0.56 0.69 0.83 1.25 1.67 W6x16 0.66 0.56 0.76 0.97 1.39 1.81
0.55 0.69 0.83 1.24 1.65 W6x20 0.67 0.55 0.76 0.96 1.38 1.79
0.49 0.62 0.74 1.11 1.48 W6x26 0.82 0.49 0.68 0.86 1.23 1.60
0.72 0.90 1.08 1.62 2.16 W8x10 0.37 0.72 0.99 1.26 1.80 2.35
0.65 0.82 0.98 1.47 1.96 W8x13 0.47 0.65 0.90 1.14 1.64 2.13
0.61 0.77 0.92 1.38 1.84 W8x15 0.54 0.61 0.84 1.07 1.54 2.00
0.60 0.75 0.90 1.35 1.79 W8x18 0.57 0.60 0.82 1.05 1.50 1.94
0.56 0.69 0.83 1.25 1.67 W8x21 0.66 0.56 0.76 0.97 1.39 1.81
0.54 0.68 0.81 1.22 1.63 W8x24 0.69 0.54 0.75 0.95 1.36 1.76
0.50 0.63 0.75 1.13 1.50 W8x28 0.8 0.50 0.69 0.88 1.25 1.63
0.50 0.63 0.76 1.13 1.51 W8x31 0.79 0.50 0.69 0.88 1.26 1.64
0.47 0.59 0.71 1.06 1.42 W8x35 0.88 0.47 0.65 0.83 1.18 1.54
0.44 0.55 0.66 0.98 1.31 W8x40 1 0.44 0.60 0.77 1.09 1.42
0.39 0.49 0.59 0.88 1.18 W8x48 1.18 0.39 0.54 0.69 0.98 1.28
0.38 0.44 0.52 0.78 1.04 W8x58 1.41 0.38 0.48 0.61 0.87 1.13
0.38 0.40 0.48 0.71 0.95 W8x67 1.61 0.38 0.44 0.55 0.79 1.03
0.71 0.89 1.07 1.61 2.14 W10x12 0.38 0.71 0.98 1.25 1.79 2.32
0.65 0.81 0.97 1.46 1.94 W10x15 0.48 0.65 0.89 1.13 1.62 2.11
0.61 0.77 0.92 1.38 1.84 W10x17 0.54 0.61 0.84 1.07 1.54 2.00
0.59 0.74 0.88 1.32 1.76 W10x19 0.59 0.59 0.81 1.03 1.47 1.91
0.59 0.74 0.88 1.32 1.76 W10x22 0.59 0.59 0.81 1.03 1.47 1.91
0.54 0.68 0.81 1.22 1.63 W10x26 0.69 0.54 0.75 0.95 1.36 1.76
0.50 0.63 0.76 1.13 1.51 W10x30 0.79 0.50 0.69 0.88 1.26 1.64
0.51 0.64 0.77 1.15 1.53 W10x33 0.77 0.51 0.70 0.89 1.28 1.66
0.47 0.58 0.70 1.05 1.40 W10x39 0.9 0.47 0.64 0.82 1.17 1.52
0.43 0.54 0.64 0.97 1.29 W10x46 1.03 0.43 0.59 0.75 1.07 1.40
0.44 0.55 0.66 0.99 1.32 W10x49 0.99 0.44 0.61 0.77 1.10 1.43
0.41 0.52 0.62 0.93 1.24 W10x54 1.09 0.41 0.57 0.72 1.04 1.35
0.39 0.49 0.58 0.88 1.17 W10x60 1.2 0.39 0.53 0.68 0.97 1.26
0.38 0.45 0.54 0.80 1.07 W10x68 1.36 0.38 0.49 0.63 0.89 1.16
0.38 0.41 0.50 0.74 0.99 W10x77 1.52 0.38 0.45 0.58 0.83 1.07
0.38 0.38 0.45 0.68 0.91 W10x88 1.72 0.38 0.41 0.53 0.75 0.98
0.38 0.38 0.42 0.62 0.83 W10x100 1.93 0.38 0.38 0.48 0.69 0.90
0.38 0.38 0.38 0.57 0.77 W10x112 2.14 0.38 0.38 0.45 0.64 0.83
0.70 0.88 1.05 1.58 2.10 W12x14 0.4 0.70 0.96 1.23 1.75 2.28
0.67 0.83 1.00 1.50 2.00 W12x16 0.45 0.67 0.92 1.17 1.67 2.17
0.62 0.77 0.93 1.39 1.86 W12x19 0.53 0.62 0.85 1.08 1.55 2.01
0.58 0.72 0.87 1.30 1.74 W12x22 0.61 0.58 0.80 1.01 1.45 1.88
0.58 0.73 0.88 1.31 1.75 W12x26 0.6 0.58 0.80 1.02 1.46 1.90
0.54 0.68 0.81 1.22 1.63 W12x30 0.69 0.54 0.75 0.95 1.36 1.76
Full Flange Tip Thickness ( NWC Full Flange Tip Thickness ( LWC
0.50 0.63 0.76 1.13 1.51 W12x35 0.79 0.50 0.69 0.88 1.26 1.64
0.48 0.60 0.72 1.09 1.45 W12x40 0.85 0.48 0.66 0.84 1.21 1.57
0.45 0.56 0.68 1.02 1.35 W12x45 0.95 0.45 0.62 0.79 1.13 1.47
0.43 0.53 0.64 0.96 1.28 W12x50 1.04 0.43 0.59 0.75 1.07 1.39
0.44 0.55 0.66 0.99 1.32 W12x53 0.99 0.44 0.61 0.77 1.10 1.43
0.43 0.53 0.64 0.96 1.28 W12x54 1.04 0.43 0.59 0.75 1.07 1.39
0.42 0.52 0.63 0.94 1.25 W12x58 1.08 0.42 0.57 0.73 1.04 1.35
0.41 0.52 0.62 0.93 1.24 W12x65 1.09 0.41 0.57 0.72 1.04 1.35
0.39 0.49 0.58 0.88 1.17 W12x72 1.2 0.39 0.53 0.68 0.97 1.26
0.38 0.46 0.55 0.82 1.09 W12x79 1.32 0.38 0.50 0.64 0.91 1.18
0.38 0.43 0.51 0.77 1.03 W12x87 1.44 0.38 0.47 0.60 0.86 1.12
0.38 0.40 0.48 0.73 0.97 W12x96 1.57 0.38 0.44 0.56 0.81 1.05
0.38 0.38 0.45 0.68 0.90 W12x106 1.73 0.38 0.41 0.53 0.75 0.98
0.38 0.38 0.41 0.62 0.83 W12x120 1.94 0.38 0.38 0.48 0.69 0.90
0.38 0.38 0.38 0.57 0.76 W12x136 2.17 0.38 0.38 0.44 0.63 0.82
0.38 0.38 0.38 0.53 0.70 W12x152 2.4 0.38 0.38 0.41 0.58 0.76
0.38 0.38 0.38 0.48 0.64 W12x170 2.66 0.38 0.38 0.38 0.54 0.70
0.38 0.38 0.38 0.45 0.59 W12x190 2.93 0.38 0.38 0.38 0.50 0.64
0.38 0.38 0.38 0.41 0.55 W12x210 3.21 0.38 0.38 0.38 0.46 0.60
0.38 0.38 0.38 0.39 0.52 W12x230 3.47 0.38 0.38 0.38 0.43 0.56
0.38 0.38 0.38 0.38 0.48 W12x262 3.76 0.38 0.38 0.38 0.40 0.52
0.38 0.38 0.38 0.38 0.45 W12x279 4.1 0.38 0.38 0.38 0.38 0.48
0.38 0.38 0.38 0.38 0.42 W12x305 4.41 0.38 0.38 0.38 0.38 0.45
0.38 0.38 0.38 0.38 0.39 W12x336 4.78 0.38 0.38 0.38 0.38 0.42
0.63 0.78 0.94 1.41 1.88 W14x22 0.52 0.63 0.86 1.09 1.56 2.03
0.58 0.72 0.87 1.30 1.74 W14x26 0.61 0.58 0.80 1.01 1.45 1.88
0.57 0.71 0.85 1.28 1.71 W14x30 0.63 0.57 0.78 1.00 1.42 1.85
0.53 0.67 0.80 1.20 1.60 W14x34 0.71 0.53 0.73 0.94 1.34 1.74
0.50 0.63 0.76 1.13 1.51 W14x38 0.79 0.50 0.69 0.88 1.26 1.64
0.48 0.60 0.72 1.09 1.45 W14x43 0.85 0.48 0.66 0.84 1.21 1.57
0.45 0.57 0.68 1.02 1.36 W14x48 0.94 0.45 0.63 0.80 1.14 1.48
0.43 0.54 0.64 0.97 1.29 W14x53 1.03 0.43 0.59 0.75 1.07 1.40
0.42 0.52 0.63 0.94 1.26 W14x61 1.07 0.42 0.58 0.73 1.05 1.36
0.39 0.49 0.59 0.88 1.17 W14x68 1.19 0.39 0.54 0.68 0.98 1.27
0.38 0.47 0.56 0.84 1.12 W14x74 1.28 0.38 0.51 0.65 0.93 1.21
0.38 0.44 0.52 0.78 1.04 W14x82 1.41 0.38 0.48 0.61 0.87 1.13
0.38 0.47 0.56 0.84 1.12 W14x90 1.27 0.38 0.51 0.66 0.94 1.22
0.38 0.44 0.53 0.79 1.06 W14x99 1.39 0.38 0.48 0.62 0.88 1.14
0.38 0.41 0.49 0.74 0.99 W14x109 1.53 0.38 0.45 0.58 0.82 1.07
0.38 0.39 0.46 0.69 0.93 W14x120 1.67 0.38 0.42 0.54 0.77 1.00
0.38 0.38 0.43 0.65 0.86 W14x132 1.83 0.38 0.40 0.50 0.72 0.94
0.38 0.38 0.41 0.62 0.83 W14x145 1.94 0.38 0.38 0.48 0.69 0.90
0.38 0.38 0.39 0.58 0.77 W14x159 2.11 0.38 0.38 0.45 0.65 0.84
0.38 0.38 0.38 0.55 0.74 W14x176 2.25 0.38 0.38 0.43 0.61 0.80
0.38 0.38 0.38 0.54 0.72 W14x193 2.32 0.38 0.38 0.42 0.60 0.78
0.38 0.38 0.38 0.47 0.63 W14x211 2.74 0.38 0.38 0.38 0.52 0.68
0.38 0.38 0.38 0.44 0.58 W14x233 3 0.38 0.38 0.38 0.49 0.63
0.38 0.38 0.38 0.41 0.54 W14x257 3.27 0.38 0.38 0.38 0.45 0.59
0.38 0.38 0.38 0.38 0.50 W14x283 3.57 0.38 0.38 0.38 0.42 0.55
0.38 0.38 0.38 0.38 0.47 W14x311 3.88 0.38 0.38 0.38 0.39 0.51
0.38 0.38 0.38 0.38 0.44 W14x342 4.21 0.38 0.38 0.38 0.38 0.47
0.38 0.38 0.38 0.38 0.41 W14x370 4.51 0.38 0.38 0.38 0.38 0.45
0.38 0.38 0.38 0.38 0.39 W14x398 4.8 0.38 0.38 0.38 0.38 0.42
0.38 0.38 0.38 0.38 0.38 W14x426 5.09 0.38 0.38 0.38 0.38 0.40
0.38 0.38 0.38 0.38 0.38 W14x455 5.38 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x500 5.82 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x550 6.3 0.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 0.38 W14x605 6.8 0.38 0.38 0.38 0.38 0.38
0.61 0.76 0.91 1.37 1.83 W16x26 0.55 0.61 0.84 1.07 1.52 1.98
0.56 0.70 0.84 1.26 1.68 W16x31 0.65 0.56 0.77 0.98 1.40 1.82
0.54 0.68 0.81 1.22 1.63 W16x36 0.69 0.54 0.75 0.95 1.36 1.76
0.51 0.64 0.77 1.16 1.54 W16x40 0.76 0.51 0.71 0.90 1.29 1.67
0.48 0.60 0.72 1.09 1.45 W16x45 0.85 0.48 0.66 0.84 1.21 1.57
0.45 0.57 0.68 1.02 1.36 W16x50 0.94 0.45 0.63 0.80 1.14 1.48
0.42 0.52 0.63 0.94 1.26 W16x67 1.07 0.42 0.58 0.73 1.05 1.36
0.42 0.52 0.63 0.94 1.26 W16x77 1.07 0.42 0.58 0.73 1.05 1.36
0.38 0.48 0.58 0.87 1.15 W16x89 1.22 0.38 0.53 0.67 0.96 1.25
0.38 0.41 0.49 0.73 0.97 W16x100 1.56 0.38 0.45 0.57 0.81 1.05
0.56 0.69 0.83 1.25 1.67 W18x35 0.66 0.56 0.76 0.97 1.39 1.81
0.51 0.64 0.77 1.16 1.54 W18x40 0.76 0.51 0.71 0.90 1.29 1.67
0.48 0.60 0.72 1.08 1.44 W18x46 0.86 0.48 0.66 0.84 1.20 1.56
0.48 0.60 0.71 1.07 1.43 W18x50 0.87 0.48 0.65 0.83 1.19 1.55
0.45 0.56 0.68 1.02 1.35 W18x55 0.95 0.45 0.62 0.79 1.13 1.47
0.43 0.54 0.64 0.97 1.29 W18x60 1.03 0.43 0.59 0.75 1.07 1.40
0.41 0.51 0.61 0.92 1.23 W18x65 1.11 0.41 0.56 0.72 1.02 1.33
0.39 0.48 0.58 0.87 1.16 W18x71 1.21 0.39 0.53 0.68 0.97 1.26
0.41 0.51 0.61 0.92 1.23 W18x76 1.11 0.41 0.56 0.72 1.02 1.33
0.38 0.48 0.57 0.86 1.14 W18x88 1.24 0.38 0.52 0.67 0.95 1.24
0.38 0.44 0.53 0.79 1.06 W18x97 1.39 0.38 0.48 0.62 0.88 1.14
0.38 0.41 0.50 0.74 0.99 W18x106 1.52 0.38 0.45 0.58 0.83 1.07
0.38 0.38 0.46 0.69 0.92 W18x119 1.68 0.38 0.42 0.54 0.77 1.00
0.53 0.66 0.79 1.18 1.58 W21x44 0.73 0.53 0.72 0.92 1.32 1.71
0.49 0.61 0.73 1.10 1.47 W21x50 0.83 0.49 0.67 0.86 1.22 1.59
0.46 0.57 0.69 1.03 1.37 W21x57 0.93 0.46 0.63 0.80 1.14 1.49
0.45 0.57 0.68 1.02 1.36 W21x62 0.94 0.45 0.63 0.80 1.14 1.48
0.43 0.54 0.64 0.97 1.29 W21x68 1.03 0.43 0.59 0.75 1.07 1.40
0.38 0.48 0.57 0.86 1.14 W21x83 1.24 0.38 0.52 0.67 0.95 1.24
0.38 0.44 0.53 0.80 1.06 W21x93 1.38 0.38 0.49 0.62 0.88 1.15
0.38 0.46 0.56 0.83 1.11 W21x101 1.29 0.38 0.51 0.65 0.93 1.20
0.38 0.44 0.52 0.78 1.04 W21x111 1.41 0.38 0.48 0.61 0.87 1.13
0.38 0.41 0.49 0.74 0.98 W21x122 1.54 0.38 0.45 0.57 0.82 1.06
0.38 0.39 0.46 0.70 0.93 W21x132 1.66 0.38 0.43 0.54 0.77 1.01
0.38 0.38 0.43 0.65 0.86 W21x147 1.83 0.38 0.40 0.50 0.72 0.94
0.49 0.62 0.74 1.11 1.48 W24x55 0.82 0.49 0.68 0.86 1.23 1.60
0.46 0.58 0.69 1.04 1.38 W24x62 0.92 0.46 0.63 0.81 1.15 1.50
0.46 0.57 0.69 1.03 1.37 W24x68 0.93 0.46 0.63 0.80 1.14 1.49
0.43 0.54 0.65 0.97 1.30 W24x76 1.02 0.43 0.59 0.76 1.08 1.40
0.40 0.51 0.61 0.91 1.21 W24x84 1.13 0.40 0.56 0.71 1.01 1.32
0.38 0.47 0.56 0.85 1.13 W24x94 1.26 0.38 0.52 0.66 0.94 1.22
0.38 0.48 0.58 0.87 1.15 W24x104 1.22 0.38 0.53 0.67 0.96 1.25
0.38 0.45 0.54 0.80 1.07 W24x117 1.36 0.38 0.49 0.63 0.89 1.16
0.38 0.41 0.50 0.74 0.99 W24x131 1.52 0.38 0.45 0.58 0.83 1.07
0.38 0.38 0.46 0.69 0.92 W24x146 1.68 0.38 0.42 0.54 0.77 1.00
0.38 0.38 0.43 0.64 0.86 W24x162 1.85 0.38 0.39 0.50 0.71 0.93
0.43 0.54 0.65 0.97 1.30 W27x84 1.02 0.43 0.59 0.76 1.08 1.40
0.40 0.51 0.61 0.91 1.21 W27x94 1.13 0.40 0.56 0.71 1.01 1.32
0.38 0.48 0.57 0.86 1.15 W27x102 1.23 0.38 0.53 0.67 0.96 1.24
0.38 0.45 0.54 0.80 1.07 W27x114 1.36 0.38 0.49 0.63 0.89 1.16
0.38 0.41 0.49 0.74 0.99 W27x146 1.53 0.38 0.45 0.58 0.82 1.07
0.38 0.38 0.46 0.69 0.92 W27x161 1.68 0.38 0.42 0.54 0.77 1.00
0.38 0.38 0.43 0.64 0.86 W27x178 1.85 0.38 0.39 0.50 0.71 0.93
0.41 0.51 0.62 0.93 1.24 W30x99 1.1 0.41 0.57 0.72 1.03 1.34
0.39 0.49 0.58 0.88 1.17 W30x108 1.2 0.39 0.53 0.68 0.97 1.26
0.38 0.47 0.56 0.84 1.12 W30x116 1.28 0.38 0.51 0.65 0.93 1.21
0.38 0.44 0.53 0.80 1.07 W30x124 1.37 0.38 0.49 0.62 0.89 1.15
0.38 0.42 0.51 0.76 1.02 W30x132 1.46 0.38 0.47 0.59 0.85 1.10
0.38 0.39 0.46 0.70 0.93 W30x173 1.66 0.38 0.43 0.54 0.77 1.01
0.38 0.38 0.43 0.65 0.87 W30x191 1.82 0.38 0.40 0.51 0.72 0.94
0.38 0.38 0.40 0.61 0.81 W30x211 2 0.38 0.38 0.47 0.67 0.88
0.39 0.49 0.59 0.88 1.17 W33x118 1.19 0.39 0.54 0.68 0.98 1.27
0.38 0.46 0.55 0.82 1.10 W33x130 1.31 0.38 0.50 0.64 0.92 1.19
0.38 0.44 0.52 0.78 1.04 W33x141 1.41 0.38 0.48 0.61 0.87 1.13
0.38 0.41 0.50 0.75 1.00 W33x152 1.51 0.38 0.46 0.58 0.83 1.08
0.38 0.38 0.44 0.66 0.88 W33x201 1.78 0.38 0.40 0.51 0.74 0.96
Full Flange Tip Thicknesses ( NWC Full Flange Tip Thicknesses ( LWC
0.56 0.77 0.98 1.40 2.24 W4x13 0.65 0.56 0.91 1.12 1.75 2.24
0.56 0.77 0.98 1.40 2.24 W6x16 0.65 0.56 0.91 1.12 1.75 2.24
0.51 0.71 0.90 1.29 2.06 W6x19 0.76 0.51 0.84 1.03 1.61 2.06
0.71 0.97 1.24 1.77 2.83 W6x9 0.39 0.71 1.15 1.41 2.21 2.83
0.63 0.87 1.10 1.58 2.52 W6x12 0.51 0.63 1.02 1.26 1.97 2.52
0.56 0.76 0.97 1.39 2.22 W6x16 0.66 0.56 0.90 1.11 1.74 2.22
0.55 0.76 0.96 1.38 2.20 W6x20 0.67 0.55 0.90 1.10 1.72 2.20
0.49 0.68 0.86 1.23 1.97 W6x26 0.82 0.49 0.80 0.99 1.54 1.97
0.72 0.99 1.26 1.80 2.89 W8x10 0.37 0.72 1.17 1.44 2.26 2.89
0.65 0.90 1.14 1.64 2.62 W8x13 0.47 0.65 1.06 1.31 2.04 2.62
0.61 0.84 1.07 1.54 2.46 W8x15 0.54 0.61 1.00 1.23 1.92 2.46
0.60 0.82 1.05 1.50 2.39 W8x18 0.57 0.60 0.97 1.20 1.87 2.39
0.56 0.76 0.97 1.39 2.22 W8x21 0.66 0.56 0.90 1.11 1.74 2.22
0.54 0.75 0.95 1.36 2.17 W8x24 0.69 0.54 0.88 1.09 1.70 2.17
0.50 0.69 0.88 1.25 2.00 W8x28 0.8 0.50 0.81 1.00 1.56 2.00
0.50 0.69 0.88 1.26 2.01 W8x31 0.79 0.50 0.82 1.01 1.57 2.01
0.47 0.65 0.83 1.18 1.89 W8x35 0.88 0.47 0.77 0.95 1.48 1.89
0.44 0.60 0.77 1.09 1.75 W8x40 1 0.44 0.71 0.88 1.37 1.75
0.39 0.54 0.69 0.98 1.57 W8x48 1.18 0.39 0.64 0.79 1.23 1.57
0.38 0.48 0.61 0.87 1.39 W8x58 1.41 0.38 0.57 0.70 1.09 1.39
0.38 0.44 0.55 0.79 1.27 W8x67 1.61 0.38 0.51 0.63 0.99 1.27
0.71 0.98 1.25 1.79 2.86 W10x12 0.38 0.71 1.16 1.43 2.23 2.86
0.65 0.89 1.13 1.62 2.59 W10x15 0.48 0.65 1.05 1.30 2.03 2.59
0.61 0.84 1.07 1.54 2.46 W10x17 0.54 0.61 1.00 1.23 1.92 2.46
0.59 0.81 1.03 1.47 2.35 W10x19 0.59 0.59 0.96 1.18 1.84 2.35
0.59 0.81 1.03 1.47 2.35 W10x22 0.59 0.59 0.96 1.18 1.84 2.35
0.54 0.75 0.95 1.36 2.17 W10x26 0.69 0.54 0.88 1.09 1.70 2.17
0.50 0.69 0.88 1.26 2.01 W10x30 0.79 0.50 0.82 1.01 1.57 2.01
0.51 0.70 0.89 1.28 2.04 W10x33 0.77 0.51 0.83 1.02 1.60 2.04
0.47 0.64 0.82 1.17 1.87 W10x39 0.9 0.47 0.76 0.93 1.46 1.87
0.43 0.59 0.75 1.07 1.72 W10x46 1.03 0.43 0.70 0.86 1.34 1.72
0.44 0.61 0.77 1.10 1.76 W10x49 0.99 0.44 0.72 0.88 1.38 1.76
0.41 0.57 0.72 1.04 1.66 W10x54 1.09 0.41 0.67 0.83 1.29 1.66
0.39 0.53 0.68 0.97 1.56 W10x60 1.2 0.39 0.63 0.78 1.22 1.56
0.38 0.49 0.63 0.89 1.43 W10x68 1.36 0.38 0.58 0.71 1.12 1.43
0.38 0.45 0.58 0.83 1.32 W10x77 1.52 0.38 0.54 0.66 1.03 1.32
0.38 0.41 0.53 0.75 1.21 W10x88 1.72 0.38 0.49 0.60 0.94 1.21
0.38 0.38 0.48 0.69 1.11 W10x100 1.93 0.38 0.45 0.55 0.86 1.11
0.38 0.38 0.45 0.64 1.02 W10x112 2.14 0.38 0.42 0.51 0.80 1.02
0.70 0.96 1.23 1.75 2.80 W12x14 0.4 0.70 1.14 1.40 2.19 2.80
0.67 0.92 1.17 1.67 2.67 W12x16 0.45 0.67 1.08 1.33 2.08 2.67
0.62 0.85 1.08 1.55 2.48 W12x19 0.53 0.62 1.01 1.24 1.94 2.48
0.58 0.80 1.01 1.45 2.31 W12x22 0.61 0.58 0.94 1.16 1.81 2.31
0.58 0.80 1.02 1.46 2.33 W12x26 0.6 0.58 0.95 1.17 1.82 2.33
0.54 0.75 0.95 1.36 2.17 W12x30 0.69 0.54 0.88 1.09 1.70 2.17
0.50 0.69 0.88 1.26 2.01 W12x35 0.79 0.50 0.82 1.01 1.57 2.01
0.48 0.66 0.84 1.21 1.93 W12x40 0.85 0.48 0.78 0.97 1.51 1.93
0.45 0.62 0.79 1.13 1.81 W12x45 0.95 0.45 0.73 0.90 1.41 1.81
0.43 0.59 0.75 1.07 1.71 W12x50 1.04 0.43 0.69 0.85 1.33 1.71
0.44 0.61 0.77 1.10 1.76 W12x53 0.99 0.44 0.72 0.88 1.38 1.76
0.43 0.59 0.75 1.07 1.71 W12x54 1.04 0.43 0.69 0.85 1.33 1.71
0.42 0.57 0.73 1.04 1.67 W12x58 1.08 0.42 0.68 0.83 1.30 1.67
0.41 0.57 0.72 1.04 1.66 W12x65 1.09 0.41 0.67 0.83 1.29 1.66
0.39 0.53 0.68 0.97 1.56 W12x72 1.2 0.39 0.63 0.78 1.22 1.56
0.38 0.50 0.64 0.91 1.46 W12x79 1.32 0.38 0.59 0.73 1.14 1.46
0.38 0.47 0.60 0.86 1.37 W12x87 1.44 0.38 0.56 0.69 1.07 1.37
0.38 0.44 0.56 0.81 1.29 W12x96 1.57 0.38 0.52 0.65 1.01 1.29
0.38 0.41 0.53 0.75 1.20 W12x106 1.73 0.38 0.49 0.60 0.94 1.20
0.38 0.38 0.48 0.69 1.10 W12x120 1.94 0.38 0.45 0.55 0.86 1.10
0.38 0.38 0.44 0.63 1.01 W12x136 2.17 0.38 0.41 0.51 0.79 1.01
0.38 0.38 0.41 0.58 0.93 W12x152 2.4 0.38 0.38 0.47 0.73 0.93
0.38 0.38 0.38 0.54 0.86 W12x170 2.66 0.38 0.38 0.43 0.67 0.86
0.38 0.38 0.38 0.50 0.79 W12x190 2.93 0.38 0.38 0.40 0.62 0.79
0.38 0.38 0.38 0.46 0.73 W12x210 3.21 0.38 0.38 0.38 0.57 0.73
0.38 0.38 0.38 0.43 0.69 W12x230 3.47 0.38 0.38 0.38 0.54 0.69
0.38 0.38 0.38 0.40 0.64 W12x262 3.76 0.38 0.38 0.38 0.50 0.64
0.38 0.38 0.38 0.38 0.60 W12x279 4.1 0.38 0.38 0.38 0.47 0.60
0.38 0.38 0.38 0.38 0.56 W12x305 4.41 0.38 0.38 0.38 0.44 0.56
0.38 0.38 0.38 0.38 0.52 W12x336 4.78 0.38 0.38 0.38 0.41 0.52
0.63 0.86 1.09 1.56 2.50 W14x22 0.52 0.63 1.02 1.25 1.95 2.50
0.58 0.80 1.01 1.45 2.31 W14x26 0.61 0.58 0.94 1.16 1.81 2.31
0.57 0.78 1.00 1.42 2.28 W14x30 0.63 0.57 0.92 1.14 1.78 2.28
0.53 0.73 0.94 1.34 2.14 W14x34 0.71 0.53 0.87 1.07 1.67 2.14
0.50 0.69 0.88 1.26 2.01 W14x38 0.79 0.50 0.82 1.01 1.57 2.01
0.48 0.66 0.84 1.21 1.93 W14x43 0.85 0.48 0.78 0.97 1.51 1.93
0.45 0.63 0.80 1.14 1.82 W14x48 0.94 0.45 0.74 0.91 1.42 1.82
0.43 0.59 0.75 1.07 1.72 W14x53 1.03 0.43 0.70 0.86 1.34 1.72
0.42 0.58 0.73 1.05 1.68 W14x61 1.07 0.42 0.68 0.84 1.31 1.68
0.39 0.54 0.68 0.98 1.56 W14x68 1.19 0.39 0.64 0.78 1.22 1.56
0.38 0.51 0.65 0.93 1.49 W14x74 1.28 0.38 0.61 0.74 1.16 1.49
0.38 0.48 0.61 0.87 1.39 W14x82 1.41 0.38 0.57 0.70 1.09 1.39
0.38 0.51 0.66 0.94 1.50 W14x90 1.27 0.38 0.61 0.75 1.17 1.50
0.38 0.48 0.62 0.88 1.41 W14x99 1.39 0.38 0.57 0.70 1.10 1.41
0.38 0.45 0.58 0.82 1.31 W14x109 1.53 0.38 0.53 0.66 1.03 1.31
0.38 0.42 0.54 0.77 1.23 W14x120 1.67 0.38 0.50 0.62 0.96 1.23
0.38 0.40 0.50 0.72 1.15 W14x132 1.83 0.38 0.47 0.58 0.90 1.15
0.38 0.38 0.48 0.69 1.10 W14x145 1.94 0.38 0.45 0.55 0.86 1.10
0.38 0.38 0.45 0.65 1.03 W14x159 2.11 0.38 0.42 0.52 0.81 1.03
0.38 0.38 0.43 0.61 0.98 W14x176 2.25 0.38 0.40 0.49 0.77 0.98
0.38 0.38 0.42 0.60 0.96 W14x193 2.32 0.38 0.39 0.48 0.75 0.96
0.38 0.38 0.38 0.52 0.84 W14x211 2.74 0.38 0.38 0.42 0.65 0.84
0.38 0.38 0.38 0.49 0.78 W14x233 3 0.38 0.38 0.39 0.61 0.78
0.38 0.38 0.38 0.45 0.72 W14x257 3.27 0.38 0.38 0.38 0.57 0.72
0.38 0.38 0.38 0.42 0.67 W14x283 3.57 0.38 0.38 0.38 0.52 0.67
0.38 0.38 0.38 0.39 0.63 W14x311 3.88 0.38 0.38 0.38 0.49 0.63
0.38 0.38 0.38 0.38 0.58 W14x342 4.21 0.38 0.38 0.38 0.45 0.58
0.38 0.38 0.38 0.38 0.55 W14x370 4.51 0.38 0.38 0.38 0.43 0.55
0.38 0.38 0.38 0.38 0.52 W14x398 4.8 0.38 0.38 0.38 0.41 0.52
0.38 0.38 0.38 0.38 0.49 W14x426 5.09 0.38 0.38 0.38 0.38 0.49
0.38 0.38 0.38 0.38 0.47 W14x455 5.38 0.38 0.38 0.38 0.38 0.47
0.38 0.38 0.38 0.38 0.44 W14x500 5.82 0.38 0.38 0.38 0.38 0.44
0.38 0.38 0.38 0.38 0.41 W14x550 6.3 0.38 0.38 0.38 0.38 0.41
0.38 0.38 0.38 0.38 0.38 W14x605 6.8 0.38 0.38 0.38 0.38 0.38
0.61 0.84 1.07 1.52 2.43 W16x26 0.55 0.61 0.99 1.22 1.90 2.43
0.56 0.77 0.98 1.40 2.24 W16x31 0.65 0.56 0.91 1.12 1.75 2.24
0.54 0.75 0.95 1.36 2.17 W16x36 0.69 0.54 0.88 1.09 1.70 2.17
0.51 0.71 0.90 1.29 2.06 W16x40 0.76 0.51 0.84 1.03 1.61 2.06
0.48 0.66 0.84 1.21 1.93 W16x45 0.85 0.48 0.78 0.97 1.51 1.93
0.45 0.63 0.80 1.14 1.82 W16x50 0.94 0.45 0.74 0.91 1.42 1.82
0.42 0.58 0.73 1.05 1.68 W16x67 1.07 0.42 0.68 0.84 1.31 1.68
0.42 0.58 0.73 1.05 1.68 W16x77 1.07 0.42 0.68 0.84 1.31 1.68
0.38 0.53 0.67 0.96 1.54 W16x89 1.22 0.38 0.63 0.77 1.20 1.54
0.38 0.45 0.57 0.81 1.30 W16x100 1.56 0.38 0.53 0.65 1.01 1.30
0.56 0.76 0.97 1.39 2.22 W18x35 0.66 0.56 0.90 1.11 1.74 2.22
0.51 0.71 0.90 1.29 2.06 W18x40 0.76 0.51 0.84 1.03 1.61 2.06
0.48 0.66 0.84 1.20 1.92 W18x46 0.86 0.48 0.78 0.96 1.50 1.92
0.48 0.65 0.83 1.19 1.90 W18x50 0.87 0.48 0.77 0.95 1.49 1.90
0.45 0.62 0.79 1.13 1.81 W18x55 0.95 0.45 0.73 0.90 1.41 1.81
0.43 0.59 0.75 1.07 1.72 W18x60 1.03 0.43 0.70 0.86 1.34 1.72
0.41 0.56 0.72 1.02 1.64 W18x65 1.11 0.41 0.67 0.82 1.28 1.64
0.39 0.53 0.68 0.97 1.55 W18x71 1.21 0.39 0.63 0.77 1.21 1.55
0.41 0.56 0.72 1.02 1.64 W18x76 1.11 0.41 0.67 0.82 1.28 1.64
0.38 0.52 0.67 0.95 1.52 W18x88 1.24 0.38 0.62 0.76 1.19 1.52
0.38 0.48 0.62 0.88 1.41 W18x97 1.39 0.38 0.57 0.70 1.10 1.41
0.38 0.45 0.58 0.83 1.32 W18x106 1.52 0.38 0.54 0.66 1.03 1.32
0.38 0.42 0.54 0.77 1.23 W18x119 1.68 0.38 0.50 0.61 0.96 1.23
0.53 0.72 0.92 1.32 2.11 W21x44 0.73 0.53 0.86 1.05 1.64 2.11
0.49 0.67 0.86 1.22 1.96 W21x50 0.83 0.49 0.80 0.98 1.53 1.96
0.46 0.63 0.80 1.14 1.83 W21x57 0.93 0.46 0.74 0.92 1.43 1.83
0.45 0.63 0.80 1.14 1.82 W21x62 0.94 0.45 0.74 0.91 1.42 1.82
0.43 0.59 0.75 1.07 1.72 W21x68 1.03 0.43 0.70 0.86 1.34 1.72
0.38 0.52 0.67 0.95 1.52 W21x83 1.24 0.38 0.62 0.76 1.19 1.52
0.38 0.49 0.62 0.88 1.41 W21x93 1.38 0.38 0.57 0.71 1.10 1.41
0.38 0.51 0.65 0.93 1.48 W21x101 1.29 0.38 0.60 0.74 1.16 1.48
0.38 0.48 0.61 0.87 1.39 W21x111 1.41 0.38 0.57 0.70 1.09 1.39
0.38 0.45 0.57 0.82 1.31 W21x122 1.54 0.38 0.53 0.65 1.02 1.31
0.38 0.43 0.54 0.77 1.24 W21x132 1.66 0.38 0.50 0.62 0.97 1.24
0.38 0.40 0.50 0.72 1.15 W21x147 1.83 0.38 0.47 0.58 0.90 1.15
0.49 0.68 0.86 1.23 1.97 W24x55 0.82 0.49 0.80 0.99 1.54 1.97
0.46 0.63 0.81 1.15 1.84 W24x62 0.92 0.46 0.75 0.92 1.44 1.84
0.46 0.63 0.80 1.14 1.83 W24x68 0.93 0.46 0.74 0.92 1.43 1.83
0.43 0.59 0.76 1.08 1.73 W24x76 1.02 0.43 0.70 0.86 1.35 1.73
0.40 0.56 0.71 1.01 1.62 W24x84 1.13 0.40 0.66 0.81 1.26 1.62
0.38 0.52 0.66 0.94 1.51 W24x94 1.26 0.38 0.61 0.75 1.18 1.51
0.38 0.53 0.67 0.96 1.54 W24x104 1.22 0.38 0.63 0.77 1.20 1.54
0.38 0.49 0.63 0.89 1.43 W24x117 1.36 0.38 0.58 0.71 1.12 1.43
0.38 0.45 0.58 0.83 1.32 W24x131 1.52 0.38 0.54 0.66 1.03 1.32
0.38 0.42 0.54 0.77 1.23 W24x146 1.68 0.38 0.50 0.61 0.96 1.23
0.38 0.39 0.50 0.71 1.14 W24x162 1.85 0.38 0.46 0.57 0.89 1.14
0.43 0.59 0.76 1.08 1.73 W27x84 1.02 0.43 0.70 0.86 1.35 1.73
0.40 0.56 0.71 1.01 1.62 W27x94 1.13 0.40 0.66 0.81 1.26 1.62
0.38 0.53 0.67 0.96 1.53 W27x102 1.23 0.38 0.62 0.77 1.20 1.53
0.38 0.49 0.63 0.89 1.43 W27x114 1.36 0.38 0.58 0.71 1.12 1.43
0.38 0.45 0.58 0.82 1.31 W27x146 1.53 0.38 0.53 0.66 1.03 1.31
0.38 0.42 0.54 0.77 1.23 W27x161 1.68 0.38 0.50 0.61 0.96 1.23
0.38 0.39 0.50 0.71 1.14 W27x178 1.85 0.38 0.46 0.57 0.89 1.14
0.41 0.57 0.72 1.03 1.65 W30x99 1.1 0.41 0.67 0.82 1.29 1.65
0.39 0.53 0.68 0.97 1.56 W30x108 1.2 0.39 0.63 0.78 1.22 1.56
0.38 0.51 0.65 0.93 1.49 W30x116 1.28 0.38 0.61 0.74 1.16 1.49
0.38 0.49 0.62 0.89 1.42 W30x124 1.37 0.38 0.58 0.71 1.11 1.42
0.38 0.47 0.59 0.85 1.36 W30x132 1.46 0.38 0.55 0.68 1.06 1.36
0.38 0.43 0.54 0.77 1.24 W30x173 1.66 0.38 0.50 0.62 0.97 1.24
0.38 0.40 0.51 0.72 1.16 W30x191 1.82 0.38 0.47 0.58 0.90 1.16
0.38 0.38 0.47 0.67 1.08 W30x211 2 0.38 0.44 0.54 0.84 1.08
0.39 0.54 0.68 0.98 1.56 W33x118 1.19 0.39 0.64 0.78 1.22 1.56
0.38 0.50 0.64 0.92 1.47 W33x130 1.31 0.38 0.60 0.73 1.15 1.47
0.38 0.48 0.61 0.87 1.39 W33x141 1.41 0.38 0.57 0.70 1.09 1.39
0.38 0.46 0.58 0.83 1.33 W33x152 1.51 0.38 0.54 0.66 1.04 1.33
0.38 0.40 0.51 0.74 1.18 W33x201 1.78 0.38 0.48 0.59 0.92 1.18
UL P937 - Lightweight insulating concrete roof deck
Unrestrained Assemby Rating Restrained Assemby Rating

0.49 0.84 1.26 1.76 W4x13 0.65 0.49 0.70 1.05 1.51
0.49 0.84 1.26 1.76 W5x16 0.65 0.49 0.70 1.05 1.51
0.45 0.77 1.16 1.62 W5x19 0.76 0.45 0.64 0.97 1.39
0.62 1.06 1.59 2.23 W6x9 0.39 0.62 0.88 1.33 1.91
0.55 0.95 1.42 1.99 W6x12 0.51 0.55 0.79 1.18 1.70
0.49 0.83 1.25 1.75 W6x16 0.66 0.49 0.69 1.04 1.50
0.48 0.83 1.24 1.74 W6x20 0.67 0.48 0.69 1.03 1.49
0.43 0.74 1.11 1.55 W6x26 0.82 0.43 0.62 0.92 1.33
0.63 1.08 1.62 2.27 W8x10 0.37 0.63 0.90 1.35 1.95
0.57 0.98 1.47 2.06 W8x13 0.47 0.57 0.82 1.23 1.77
0.54 0.92 1.38 1.93 W8x15 0.54 0.54 0.77 1.15 1.66
0.52 0.90 1.35 1.88 W8x18 0.57 0.52 0.75 1.12 1.62
0.49 0.83 1.25 1.75 W8x21 0.66 0.49 0.69 1.04 1.50
0.47 0.81 1.22 1.71 W8x24 0.69 0.47 0.68 1.02 1.47
0.44 0.75 1.13 1.58 W8x28 0.80 0.44 0.63 0.94 1.35
0.44 0.76 1.13 1.59 W8x31 0.79 0.44 0.63 0.94 1.36
0.41 0.71 1.06 1.49 W8x35 0.88 0.41 0.59 0.89 1.28
0.38 0.66 0.98 1.38 W8x40 1.00 0.38 0.55 0.82 1.18
0.38 0.59 0.88 1.24 W8x48 1.18 0.38 0.49 0.74 1.06
0.38 0.52 0.78 1.10 W8x58 1.41 0.38 0.44 0.65 0.94
0.38 0.48 0.71 1.00 W8x67 1.61 0.38 0.40 0.59 0.86
0.63 1.07 1.61 2.25 W10x12 0.38 0.63 0.89 1.34 1.93
0.57 0.97 1.46 2.04 W10x15 0.48 0.57 0.81 1.22 1.75
0.54 0.92 1.38 1.93 W10x17 0.54 0.54 0.77 1.15 1.66
0.51 0.88 1.32 1.85 W10x19 0.59 0.51 0.74 1.10 1.59
0.51 0.88 1.32 1.85 W10x22 0.59 0.51 0.74 1.10 1.59
0.47 0.81 1.22 1.71 W10x26 0.69 0.47 0.68 1.02 1.47
0.44 0.76 1.13 1.59 W10x30 0.79 0.44 0.63 0.94 1.36
0.45 0.77 1.15 1.61 W10x33 0.77 0.45 0.64 0.96 1.38
0.41 0.70 1.05 1.47 W10x39 0.90 0.41 0.58 0.88 1.26
0.38 0.64 0.97 1.35 W10x46 1.03 0.38 0.54 0.81 1.16
0.39 0.66 0.99 1.39 W10x49 0.99 0.39 0.55 0.83 1.19
0.38 0.62 0.93 1.30 W10x54 1.09 0.38 0.52 0.78 1.12
0.38 0.58 0.88 1.23 W10x60 1.20 0.38 0.49 0.73 1.05
0.38 0.54 0.80 1.13 W10x68 1.36 0.38 0.45 0.67 0.96
0.38 0.50 0.74 1.04 W10x77 1.52 0.38 0.41 0.62 0.89
0.38 0.45 0.68 0.95 W10x88 1.72 0.38 0.38 0.57 0.81
0.38 0.42 0.62 0.87 W10x100 1.93 0.38 0.38 0.52 0.75
0.38 0.38 0.57 0.80 W10x112 2.14 0.38 0.38 0.48 0.69
0.61 1.05 1.58 2.21 W12x14 0.40 0.61 0.88 1.31 1.89
0.58 1.00 1.50 2.10 W12x16 0.45 0.58 0.83 1.25 1.80
0.54 0.93 1.39 1.95 W12x19 0.53 0.54 0.77 1.16 1.67
0.51 0.87 1.30 1.82 W12x22 0.61 0.51 0.72 1.08 1.56
0.51 0.88 1.31 1.84 W12x26 0.60 0.51 0.73 1.09 1.58
0.47 0.81 1.22 1.71 W12x30 0.69 0.47 0.68 1.02 1.47
0.44 0.76 1.13 1.59 W12x35 0.79 0.44 0.63 0.94 1.36
0.42 0.72 1.09 1.52 W12x40 0.85 0.42 0.60 0.91 1.30

0.40 0.68 1.02 1.42 W12x45 0.95 0.40 0.56 0.85 1.22
0.38 0.64 0.96 1.34 W12x50 1.04 0.38 0.53 0.80 1.15
0.39 0.66 0.99 1.39 W12x53 0.99 0.39 0.55 0.83 1.19
0.38 0.64 0.96 1.34 W12x54 1.04 0.38 0.53 0.80 1.15
0.38 0.63 0.94 1.31 W12x58 1.08 0.38 0.52 0.78 1.13
0.38 0.62 0.93 1.30 W12x65 1.09 0.38 0.52 0.78 1.12
0.38 0.58 0.88 1.23 W12x72 1.20 0.38 0.49 0.73 1.05
0.38 0.55 0.82 1.15 W12x79 1.32 0.38 0.46 0.68 0.98
0.38 0.51 0.77 1.08 W12x87 1.44 0.38 0.43 0.64 0.93
0.38 0.48 0.73 1.02 W12x96 1.57 0.38 0.40 0.60 0.87
0.38 0.45 0.68 0.95 W12x106 1.73 0.38 0.38 0.56 0.81
0.38 0.41 0.62 0.87 W12x120 1.94 0.38 0.38 0.52 0.74
0.38 0.38 0.57 0.80 W12x136 2.17 0.38 0.38 0.47 0.68
0.38 0.38 0.53 0.74 W12x152 2.40 0.38 0.38 0.44 0.63
0.38 0.38 0.48 0.68 W12x170 2.66 0.38 0.38 0.40 0.58
0.38 0.38 0.45 0.62 W12x190 2.93 0.38 0.38 0.38 0.54
0.38 0.38 0.41 0.58 W12x210 3.21 0.38 0.38 0.38 0.50
0.38 0.38 0.39 0.54 W12x230 3.47 0.38 0.38 0.38 0.46
0.38 0.38 0.38 0.51 W12x262 3.76 0.38 0.38 0.38 0.43
0.38 0.38 0.38 0.47 W12x279 4.10 0.38 0.38 0.38 0.40
0.38 0.38 0.38 0.44 W12x305 4.41 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.41 W12x336 4.78 0.38 0.38 0.38 0.38
0.55 0.94 1.41 1.97 W14x22 0.52 0.55 0.78 1.17 1.69
0.51 0.87 1.30 1.82 W14x26 0.61 0.51 0.72 1.08 1.56
0.50 0.85 1.28 1.79 W14x30 0.63 0.50 0.71 1.07 1.54
0.47 0.80 1.20 1.68 W14x34 0.71 0.47 0.67 1.00 1.44
0.44 0.76 1.13 1.59 W14x38 0.79 0.44 0.63 0.94 1.36
0.42 0.72 1.09 1.52 W14x43 0.85 0.42 0.60 0.91 1.30
0.40 0.68 1.02 1.43 W14x48 0.94 0.40 0.57 0.85 1.23
0.38 0.64 0.97 1.35 W14x53 1.03 0.38 0.54 0.81 1.16
0.38 0.63 0.94 1.32 W14x61 1.07 0.38 0.52 0.79 1.13
0.38 0.59 0.88 1.23 W14x68 1.19 0.38 0.49 0.73 1.06
0.38 0.56 0.84 1.17 W14x74 1.28 0.38 0.47 0.70 1.01
0.38 0.52 0.78 1.10 W14x82 1.41 0.38 0.44 0.65 0.94
0.38 0.56 0.84 1.18 W14x90 1.27 0.38 0.47 0.70 1.01
0.38 0.53 0.79 1.11 W14x99 1.39 0.38 0.44 0.66 0.95
0.38 0.49 0.74 1.04 W14x109 1.53 0.38 0.41 0.62 0.89
0.38 0.46 0.69 0.97 W14x120 1.67 0.38 0.39 0.58 0.83
0.38 0.43 0.65 0.91 W14x132 1.83 0.38 0.38 0.54 0.78
0.38 0.41 0.62 0.87 W14x145 1.94 0.38 0.38 0.52 0.74
0.38 0.39 0.58 0.81 W14x159 2.11 0.38 0.38 0.48 0.70
0.38 0.38 0.55 0.77 W14x176 2.25 0.38 0.38 0.46 0.66
0.38 0.38 0.54 0.76 W14x193 2.32 0.38 0.38 0.45 0.65
0.38 0.38 0.47 0.66 W14x211 2.74 0.38 0.38 0.39 0.57
0.38 0.38 0.44 0.61 W14x233 3.00 0.38 0.38 0.38 0.53
0.38 0.38 0.41 0.57 W14x257 3.27 0.38 0.38 0.38 0.49
0.38 0.38 0.38 0.53 W14x283 3.57 0.38 0.38 0.38 0.45
0.38 0.38 0.38 0.49 W14x311 3.88 0.38 0.38 0.38 0.42
0.38 0.38 0.38 0.46 W14x342 4.21 0.38 0.38 0.38 0.39

0.38 0.38 0.38 0.43 W14x370 4.51 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.41 W14x398 4.80 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.39 W14x426 5.09 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 W14x455 5.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 W14x500 5.82 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 W14x550 6.30 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 W14x605 6.80 0.38 0.38 0.38 0.38
0.53 0.91 1.37 1.92 W16x26 0.55 0.53 0.76 1.14 1.64
0.49 0.84 1.26 1.76 W16x31 0.65 0.49 0.70 1.05 1.51
0.47 0.81 1.22 1.71 W16x36 0.69 0.47 0.68 1.02 1.47
0.45 0.77 1.16 1.62 W16x40 0.76 0.45 0.64 0.97 1.39
0.42 0.72 1.09 1.52 W16x45 0.85 0.42 0.60 0.91 1.30
0.40 0.68 1.02 1.43 W16x50 0.94 0.40 0.57 0.85 1.23
0.38 0.63 0.94 1.32 W16x67 1.07 0.38 0.52 0.79 1.13
0.38 0.63 0.94 1.32 W16x77 1.07 0.38 0.52 0.79 1.13
0.38 0.58 0.87 1.21 W16x89 1.22 0.38 0.48 0.72 1.04
0.38 0.49 0.73 1.02 W16x100 1.56 0.38 0.41 0.61 0.88
0.49 0.83 1.25 1.75 W18x35 0.66 0.49 0.69 1.04 1.50
0.45 0.77 1.16 1.62 W18x40 0.76 0.45 0.64 0.97 1.39
0.42 0.72 1.08 1.51 W18x46 0.86 0.42 0.60 0.90 1.29
0.42 0.71 1.07 1.50 W18x50 0.87 0.42 0.60 0.89 1.29
0.40 0.68 1.02 1.42 W18x55 0.95 0.40 0.56 0.85 1.22
0.38 0.64 0.97 1.35 W18x60 1.03 0.38 0.54 0.81 1.16
0.38 0.61 0.92 1.29 W18x65 1.11 0.38 0.51 0.77 1.11
0.38 0.58 0.87 1.22 W18x71 1.21 0.38 0.48 0.73 1.04
0.38 0.61 0.92 1.29 W18x76 1.11 0.38 0.51 0.77 1.11
0.38 0.57 0.86 1.20 W18x88 1.24 0.38 0.48 0.71 1.03
0.38 0.53 0.79 1.11 W18x97 1.39 0.38 0.44 0.66 0.95
0.38 0.50 0.74 1.04 W18x106 1.52 0.38 0.41 0.62 0.89
0.38 0.46 0.69 0.97 W18x119 1.68 0.38 0.38 0.58 0.83
0.46 0.79 1.18 1.66 W21x44 0.73 0.46 0.66 0.99 1.42
0.43 0.73 1.10 1.54 W21x50 0.83 0.43 0.61 0.92 1.32
0.40 0.69 1.03 1.44 W21x57 0.93 0.40 0.57 0.86 1.24
0.40 0.68 1.02 1.43 W21x62 0.94 0.40 0.57 0.85 1.23
0.38 0.64 0.97 1.35 W21x68 1.03 0.38 0.54 0.81 1.16
0.38 0.57 0.86 1.20 W21x83 1.24 0.38 0.48 0.71 1.03
0.38 0.53 0.80 1.11 W21x93 1.38 0.38 0.44 0.66 0.95
0.38 0.56 0.83 1.17 W21x101 1.29 0.38 0.46 0.69 1.00
0.38 0.52 0.78 1.10 W21x111 1.41 0.38 0.44 0.65 0.94
0.38 0.49 0.74 1.03 W21x122 1.54 0.38 0.41 0.61 0.88
0.38 0.46 0.70 0.98 W21x132 1.66 0.38 0.39 0.58 0.84
0.38 0.43 0.65 0.91 W21x147 1.83 0.38 0.38 0.54 0.78
0.43 0.74 1.11 1.55 W24x55 0.82 0.43 0.62 0.92 1.33
0.40 0.69 1.04 1.45 W24x62 0.92 0.40 0.58 0.86 1.24
0.40 0.69 1.03 1.44 W24x68 0.93 0.40 0.57 0.86 1.24
0.38 0.65 0.97 1.36 W24x76 1.02 0.38 0.54 0.81 1.17
0.38 0.61 0.91 1.27 W24x84 1.13 0.38 0.51 0.76 1.09

0.38 0.56 0.85 1.19 W24x94 1.26 0.38 0.47 0.71 1.02
0.38 0.58 0.87 1.21 W24x104 1.22 0.38 0.48 0.72 1.04
0.38 0.54 0.80 1.13 W24x117 1.36 0.38 0.45 0.67 0.96
0.38 0.50 0.74 1.04 W24x131 1.52 0.38 0.41 0.62 0.89
0.38 0.46 0.69 0.97 W24x146 1.68 0.38 0.38 0.58 0.83
0.38 0.43 0.64 0.90 W24x162 1.85 0.38 0.38 0.54 0.77
0.38 0.65 0.97 1.36 W27x84 1.02 0.38 0.54 0.81 1.17
0.38 0.61 0.91 1.27 W27x94 1.13 0.38 0.51 0.76 1.09
0.38 0.57 0.86 1.20 W27x102 1.23 0.38 0.48 0.72 1.03
0.38 0.54 0.80 1.13 W27x114 1.36 0.38 0.45 0.67 0.96
0.38 0.49 0.74 1.04 W27x146 1.53 0.38 0.41 0.62 0.89
0.38 0.46 0.69 0.97 W27x161 1.68 0.38 0.38 0.58 0.83
0.38 0.43 0.64 0.90 W27x178 1.85 0.38 0.38 0.54 0.77
0.38 0.62 0.93 1.30 W30x99 1.10 0.38 0.51 0.77 1.11
0.38 0.58 0.88 1.23 W30x108 1.20 0.38 0.49 0.73 1.05
0.38 0.56 0.84 1.17 W30x116 1.28 0.38 0.47 0.70 1.01
0.38 0.53 0.80 1.12 W30x124 1.37 0.38 0.44 0.67 0.96
0.38 0.51 0.76 1.07 W30x132 1.46 0.38 0.42 0.64 0.92
0.38 0.46 0.70 0.98 W30x173 1.66 0.38 0.39 0.58 0.84
0.38 0.43 0.65 0.91 W30x191 1.82 0.38 0.38 0.54 0.78
0.38 0.40 0.61 0.85 W30x211 2.00 0.38 0.38 0.50 0.73
0.38 0.59 0.88 1.23 W33x118 1.19 0.38 0.49 0.73 1.06
0.38 0.55 0.82 1.15 W33x130 1.31 0.38 0.46 0.69 0.99
0.38 0.52 0.78 1.10 W33x141 1.41 0.38 0.44 0.65 0.94
0.38 0.50 0.75 1.05 W33x152 1.51 0.38 0.41 0.62 0.90
0.38 0.44 0.66 0.93 W33x201 1.78 0.38 0.38 0.55 0.79
Minimum Thickness, in., Required on Beam When Lower Edge Thickness is Reduced by One-Half**

0.56 0.91 1.40 2.02 W4x13 0.65 0.56 0.77 1.19 1.89
0.56 0.91 1.40 2.02 W5x16 0.65 0.56 0.77 1.19 1.89
0.51 0.84 1.29 1.85 W5x19 0.76 0.51 0.71 1.09 1.74
0.71 1.15 1.77 2.55 W6x9 0.39 0.71 0.97 1.50 2.39
0.63 1.02 1.58 2.27 W6x12 0.51 0.63 0.87 1.34 2.13
0.56 0.90 1.39 2.00 W6x16 0.66 0.56 0.76 1.18 1.88
0.55 0.90 1.38 1.98 W6x20 0.67 0.55 0.76 1.17 1.86
0.49 0.80 1.23 1.77 W6x26 0.82 0.49 0.68 1.05 1.66
0.72 1.17 1.80 2.60 W8x10 0.37 0.72 0.99 1.53 2.44
0.65 1.06 1.64 2.36 W8x13 0.47 0.65 0.90 1.39 2.21
0.61 1.00 1.54 2.21 W8x15 0.54 0.61 0.84 1.30 2.07
0.60 0.97 1.50 2.15 W8x18 0.57 0.60 0.82 1.27 2.02
0.56 0.90 1.39 2.00 W8x21 0.66 0.56 0.76 1.18 1.88
0.54 0.88 1.36 1.95 W8x24 0.69 0.54 0.75 1.15 1.83
0.50 0.81 1.25 1.80 W8x28 0.80 0.50 0.69 1.06 1.69
0.50 0.82 1.26 1.81 W8x31 0.79 0.50 0.69 1.07 1.70
0.47 0.77 1.18 1.70 W8x35 0.88 0.47 0.65 1.01 1.60
0.44 0.71 1.09 1.58 W8x40 1.00 0.44 0.60 0.93 1.48
0.39 0.64 0.98 1.42 W8x48 1.18 0.39 0.54 0.84 1.33
0.38 0.57 0.87 1.25 W8x58 1.41 0.38 0.48 0.74 1.18
0.38 0.51 0.79 1.14 W8x67 1.61 0.38 0.44 0.67 1.07
0.71 1.16 1.79 2.57 W10x12 0.38 0.71 0.98 1.52 2.41
0.65 1.05 1.62 2.33 W10x15 0.48 0.65 0.89 1.38 2.19
0.61 1.00 1.54 2.21 W10x17 0.54 0.61 0.84 1.30 2.07
0.59 0.96 1.47 2.12 W10x19 0.59 0.59 0.81 1.25 1.99
0.59 0.96 1.47 2.12 W10x22 0.59 0.59 0.81 1.25 1.99
0.54 0.88 1.36 1.95 W10x26 0.69 0.54 0.75 1.15 1.83
0.50 0.82 1.26 1.81 W10x30 0.79 0.50 0.69 1.07 1.70
0.51 0.83 1.28 1.84 W10x33 0.77 0.51 0.70 1.09 1.72
0.47 0.76 1.17 1.68 W10x39 0.90 0.47 0.64 0.99 1.58
0.43 0.70 1.07 1.55 W10x46 1.03 0.43 0.59 0.91 1.45
0.44 0.72 1.10 1.58 W10x49 0.99 0.44 0.61 0.94 1.49
0.41 0.67 1.04 1.49 W10x54 1.09 0.41 0.57 0.88 1.40
0.39 0.63 0.97 1.40 W10x60 1.20 0.39 0.53 0.83 1.31
0.38 0.58 0.89 1.29 W10x68 1.36 0.38 0.49 0.76 1.21
0.38 0.54 0.83 1.19 W10x77 1.52 0.38 0.45 0.70 1.11
0.38 0.49 0.75 1.09 W10x88 1.72 0.38 0.41 0.64 1.02
0.38 0.45 0.69 1.00 W10x100 1.93 0.38 0.38 0.59 0.93
0.38 0.42 0.64 0.92 W10x112 2.14 0.38 0.38 0.54 0.86
0.70 1.14 1.75 2.52 W12x14 0.40 0.70 0.96 1.49 2.36
0.67 1.08 1.67 2.40 W12x16 0.45 0.67 0.92 1.42 2.25
0.62 1.01 1.55 2.23 W12x19 0.53 0.62 0.85 1.32 2.09
0.58 0.94 1.45 2.08 W12x22 0.61 0.58 0.80 1.23 1.95
0.58 0.95 1.46 2.10 W12x26 0.60 0.58 0.80 1.24 1.97
0.54 0.88 1.36 1.95 W12x30 0.69 0.54 0.75 1.15 1.83
0.50 0.82 1.26 1.81 W12x35 0.79 0.50 0.69 1.07 1.70

0.48 0.78 1.21 1.74 W12x40 0.85 0.48 0.66 1.03 1.63
0.45 0.73 1.13 1.63 W12x45 0.95 0.45 0.62 0.96 1.52
0.43 0.69 1.07 1.54 W12x50 1.04 0.43 0.59 0.91 1.44
0.44 0.72 1.10 1.58 W12x53 0.99 0.44 0.61 0.94 1.49
0.43 0.69 1.07 1.54 W12x54 1.04 0.43 0.59 0.91 1.44
0.42 0.68 1.04 1.50 W12x58 1.08 0.42 0.57 0.89 1.41
0.41 0.67 1.04 1.49 W12x65 1.09 0.41 0.57 0.88 1.40
0.39 0.63 0.97 1.40 W12x72 1.20 0.39 0.53 0.83 1.31
0.38 0.59 0.91 1.31 W12x79 1.32 0.38 0.50 0.77 1.23
0.38 0.56 0.86 1.24 W12x87 1.44 0.38 0.47 0.73 1.16
0.38 0.52 0.81 1.16 W12x96 1.57 0.38 0.44 0.69 1.09
0.38 0.49 0.75 1.08 W12x106 1.73 0.38 0.41 0.64 1.01
0.38 0.45 0.69 0.99 W12x120 1.94 0.38 0.38 0.59 0.93
0.38 0.41 0.63 0.91 W12x136 2.17 0.38 0.38 0.54 0.85
0.38 0.38 0.58 0.84 W12x152 2.40 0.38 0.38 0.50 0.79
0.38 0.38 0.54 0.77 W12x170 2.66 0.38 0.38 0.46 0.72
0.38 0.38 0.50 0.71 W12x190 2.93 0.38 0.38 0.42 0.67
0.38 0.38 0.46 0.66 W12x210 3.21 0.38 0.38 0.39 0.62
0.38 0.38 0.43 0.62 W12x230 3.47 0.38 0.38 0.38 0.58
0.38 0.38 0.40 0.58 W12x262 3.76 0.38 0.38 0.38 0.54
0.38 0.38 0.38 0.54 W12x279 4.10 0.38 0.38 0.38 0.50
0.38 0.38 0.38 0.50 W12x305 4.41 0.38 0.38 0.38 0.47
0.38 0.38 0.38 0.47 W12x336 4.78 0.38 0.38 0.38 0.44
0.63 1.02 1.56 2.25 W14x22 0.52 0.63 0.86 1.33 2.11
0.58 0.94 1.45 2.08 W14x26 0.61 0.58 0.80 1.23 1.95
0.57 0.92 1.42 2.05 W14x30 0.63 0.57 0.78 1.21 1.92
0.53 0.87 1.34 1.92 W14x34 0.71 0.53 0.73 1.14 1.80
0.50 0.82 1.26 1.81 W14x38 0.79 0.50 0.69 1.07 1.70
0.48 0.78 1.21 1.74 W14x43 0.85 0.48 0.66 1.03 1.63
0.45 0.74 1.14 1.64 W14x48 0.94 0.45 0.63 0.97 1.53
0.43 0.70 1.07 1.55 W14x53 1.03 0.43 0.59 0.91 1.45
0.42 0.68 1.05 1.51 W14x61 1.07 0.42 0.58 0.89 1.41
0.39 0.64 0.98 1.41 W14x68 1.19 0.39 0.54 0.83 1.32
0.38 0.61 0.93 1.34 W14x74 1.28 0.38 0.51 0.79 1.26
0.38 0.57 0.87 1.25 W14x82 1.41 0.38 0.48 0.74 1.18
0.38 0.61 0.94 1.35 W14x90 1.27 0.38 0.51 0.80 1.26
0.38 0.57 0.88 1.27 W14x99 1.39 0.38 0.48 0.75 1.19
0.38 0.53 0.82 1.18 W14x109 1.53 0.38 0.45 0.70 1.11
0.38 0.50 0.77 1.11 W14x120 1.67 0.38 0.42 0.66 1.04
0.38 0.47 0.72 1.04 W14x132 1.83 0.38 0.40 0.61 0.97
0.38 0.45 0.69 0.99 W14x145 1.94 0.38 0.38 0.59 0.93
0.38 0.42 0.65 0.93 W14x159 2.11 0.38 0.38 0.55 0.87
0.38 0.40 0.61 0.88 W14x176 2.25 0.38 0.38 0.52 0.83
0.38 0.39 0.60 0.86 W14x193 2.32 0.38 0.38 0.51 0.81
0.38 0.38 0.52 0.75 W14x211 2.74 0.38 0.38 0.45 0.71
0.38 0.38 0.49 0.70 W14x233 3.00 0.38 0.38 0.41 0.66

0.38 0.38 0.45 0.65 W14x257 3.27 0.38 0.38 0.38 0.61
0.38 0.38 0.42 0.60 W14x283 3.57 0.38 0.38 0.38 0.57
0.38 0.38 0.39 0.56 W14x311 3.88 0.38 0.38 0.38 0.53
0.38 0.38 0.38 0.52 W14x342 4.21 0.38 0.38 0.38 0.49
0.38 0.38 0.38 0.49 W14x370 4.51 0.38 0.38 0.38 0.46
0.38 0.38 0.38 0.47 W14x398 4.80 0.38 0.38 0.38 0.44
0.38 0.38 0.38 0.44 W14x426 5.09 0.38 0.38 0.38 0.42
0.38 0.38 0.38 0.42 W14x455 5.38 0.38 0.38 0.38 0.40
0.38 0.38 0.38 0.39 W14x500 5.82 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 W14x550 6.30 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 W14x605 6.80 0.38 0.38 0.38 0.38
0.61 0.99 1.52 2.19 W16x26 0.55 0.61 0.84 1.29 2.05
0.56 0.91 1.40 2.02 W16x31 0.65 0.56 0.77 1.19 1.89
0.54 0.88 1.36 1.95 W16x36 0.69 0.54 0.75 1.15 1.83
0.51 0.84 1.29 1.85 W16x40 0.76 0.51 0.71 1.09 1.74
0.48 0.78 1.21 1.74 W16x45 0.85 0.48 0.66 1.03 1.63
0.45 0.74 1.14 1.64 W16x50 0.94 0.45 0.63 0.97 1.53
0.42 0.68 1.05 1.51 W16x67 1.07 0.42 0.58 0.89 1.41
0.42 0.68 1.05 1.51 W16x77 1.07 0.42 0.58 0.89 1.41
0.38 0.63 0.96 1.38 W16x89 1.22 0.38 0.53 0.82 1.30
0.38 0.53 0.81 1.17 W16x100 1.56 0.38 0.45 0.69 1.09
0.56 0.90 1.39 2.00 W18x35 0.66 0.56 0.76 1.18 1.88
0.51 0.84 1.29 1.85 W18x40 0.76 0.51 0.71 1.09 1.74
0.48 0.78 1.20 1.73 W18x46 0.86 0.48 0.66 1.02 1.62
0.48 0.77 1.19 1.71 W18x50 0.87 0.48 0.65 1.01 1.61
0.45 0.73 1.13 1.63 W18x55 0.95 0.45 0.62 0.96 1.52
0.43 0.70 1.07 1.55 W18x60 1.03 0.43 0.59 0.91 1.45
0.41 0.67 1.02 1.47 W18x65 1.11 0.41 0.56 0.87 1.38
0.39 0.63 0.97 1.39 W18x71 1.21 0.39 0.53 0.82 1.31
0.41 0.67 1.02 1.47 W18x76 1.11 0.41 0.56 0.87 1.38
0.38 0.62 0.95 1.37 W18x88 1.24 0.38 0.52 0.81 1.28
0.38 0.57 0.88 1.27 W18x97 1.39 0.38 0.48 0.75 1.19
0.38 0.54 0.83 1.19 W18x106 1.52 0.38 0.45 0.70 1.11
0.38 0.50 0.77 1.11 W18x119 1.68 0.38 0.42 0.65 1.04
0.53 0.86 1.32 1.89 W21x44 0.73 0.53 0.72 1.12 1.78
0.49 0.80 1.22 1.76 W21x50 0.83 0.49 0.67 1.04 1.65
0.46 0.74 1.14 1.65 W21x57 0.93 0.46 0.63 0.97 1.54
0.45 0.74 1.14 1.64 W21x62 0.94 0.45 0.63 0.97 1.53
0.43 0.70 1.07 1.55 W21x68 1.03 0.43 0.59 0.91 1.45
0.38 0.62 0.95 1.37 W21x83 1.24 0.38 0.52 0.81 1.28
0.38 0.57 0.88 1.27 W21x93 1.38 0.38 0.49 0.75 1.19
0.38 0.60 0.93 1.33 W21x101 1.29 0.38 0.51 0.79 1.25
0.38 0.57 0.87 1.25 W21x111 1.41 0.38 0.48 0.74 1.18
0.38 0.53 0.82 1.18 W21x122 1.54 0.38 0.45 0.70 1.10
0.38 0.50 0.77 1.12 W21x132 1.66 0.38 0.43 0.66 1.05
Minimum Thickness, in., Required on Beam When Lower Edge Thickness is Reduced by one half**

0.38 0.47 0.72 1.04 W21x147 1.83 0.38 0.40 0.61 0.97
0.49 0.80 1.23 1.77 W24x55 0.82 0.49 0.68 1.05 1.66
0.46 0.75 1.15 1.66 W24x62 0.92 0.46 0.63 0.98 1.55
0.46 0.74 1.14 1.65 W24x68 0.93 0.46 0.63 0.97 1.54
0.43 0.70 1.08 1.56 W24x76 1.02 0.43 0.59 0.92 1.46
0.40 0.66 1.01 1.46 W24x84 1.13 0.40 0.56 0.86 1.37
0.38 0.61 0.94 1.35 W24x94 1.26 0.38 0.52 0.80 1.27
0.38 0.63 0.96 1.38 W24x104 1.22 0.38 0.53 0.82 1.30
0.38 0.58 0.89 1.29 W24x117 1.36 0.38 0.49 0.76 1.21
0.38 0.54 0.83 1.19 W24x131 1.52 0.38 0.45 0.70 1.11
0.38 0.50 0.77 1.11 W24x146 1.68 0.38 0.42 0.65 1.04
0.38 0.46 0.71 1.03 W24x162 1.85 0.38 0.39 0.61 0.96
0.43 0.70 1.08 1.56 W27x84 1.02 0.43 0.59 0.92 1.46
0.40 0.66 1.01 1.46 W27x94 1.13 0.40 0.56 0.86 1.37
0.38 0.62 0.96 1.38 W27x102 1.23 0.38 0.53 0.81 1.29
0.38 0.58 0.89 1.29 W27x114 1.36 0.38 0.49 0.76 1.21
0.38 0.53 0.82 1.18 W27x146 1.53 0.38 0.45 0.70 1.11
0.38 0.50 0.77 1.11 W27x161 1.68 0.38 0.42 0.65 1.04
0.38 0.46 0.71 1.03 W27x178 1.85 0.38 0.39 0.61 0.96
0.41 0.67 1.03 1.48 W30x99 1.10 0.41 0.57 0.88 1.39
0.39 0.63 0.97 1.40 W30x108 1.20 0.39 0.53 0.83 1.31
0.38 0.61 0.93 1.34 W30x116 1.28 0.38 0.51 0.79 1.26
0.38 0.58 0.89 1.28 W30x124 1.37 0.38 0.49 0.76 1.20
0.38 0.55 0.85 1.22 W30x132 1.46 0.38 0.47 0.72 1.15
0.38 0.50 0.77 1.12 W30x173 1.66 0.38 0.43 0.66 1.05
0.38 0.47 0.72 1.04 W30x191 1.82 0.38 0.40 0.61 0.98
0.38 0.44 0.67 0.97 W30x211 2.00 0.38 0.38 0.57 0.91
0.39 0.64 0.98 1.41 W33x118 1.19 0.39 0.54 0.83 1.32
0.38 0.60 0.92 1.32 W33x130 1.31 0.38 0.50 0.78 1.24
0.38 0.57 0.87 1.25 W33x141 1.41 0.38 0.48 0.74 1.18
0.38 0.54 0.83 1.19 W33x152 1.51 0.38 0.46 0.70 1.12
0.38 0.48 0.74 1.06 W33x201 1.78 0.38 0.40 0.63 0.99
**Thickness applied to beam' s lower flange edge shall not be less than 1/4-in.
Design No. S740 - Beam Only Design for Roofs

0.49 0.84 1.26 1.96 W4x13 0.65 0.49 0.70 1.05 1.68
0.49 0.84 1.26 1.96 W5x16 0.65 0.49 0.70 1.05 1.68
0.45 0.77 1.16 1.80 W5x19 0.76 0.45 0.64 0.97 1.54
0.62 1.06 1.59 2.47 W6x9 0.39 0.62 0.88 1.33 2.12
0.55 0.95 1.42 2.21 W6x12 0.51 0.55 0.79 1.18 1.89
0.49 0.83 1.25 1.94 W6x16 0.66 0.49 0.69 1.04 1.67
0.48 0.83 1.24 1.93 W6x20 0.67 0.48 0.69 1.03 1.65
0.43 0.74 1.11 1.73 W6x26 0.82 0.43 0.62 0.92 1.48
0.63 1.08 1.62 2.53 W8x10 0.37 0.63 0.90 1.35 2.16
0.57 0.98 1.47 2.29 W8x13 0.47 0.57 0.82 1.23 1.96
0.54 0.92 1.38 2.15 W8x15 0.54 0.54 0.77 1.15 1.84
0.52 0.90 1.35 2.09 W8x18 0.57 0.52 0.75 1.12 1.79
0.49 0.83 1.25 1.94 W8x21 0.66 0.49 0.69 1.04 1.67
0.47 0.81 1.22 1.90 W8x24 0.69 0.47 0.68 1.02 1.63
0.44 0.75 1.13 1.75 W8x28 0.80 0.44 0.63 0.94 1.50
0.44 0.76 1.13 1.76 W8x31 0.79 0.44 0.63 0.94 1.51
0.41 0.71 1.06 1.66 W8x35 0.88 0.41 0.59 0.89 1.42
0.38 0.66 0.98 1.53 W8x40 1.00 0.38 0.55 0.82 1.31
0.38 0.59 0.88 1.38 W8x48 1.18 0.38 0.49 0.74 1.18
0.38 0.52 0.78 1.22 W8x58 1.41 0.38 0.44 0.65 1.04
0.38 0.48 0.71 1.11 W8x67 1.61 0.38 0.40 0.59 0.95
0.63 1.07 1.61 2.50 W10x12 0.38 0.63 0.89 1.34 2.14
0.57 0.97 1.46 2.27 W10x15 0.48 0.57 0.81 1.22 1.94
0.54 0.92 1.38 2.15 W10x17 0.54 0.54 0.77 1.15 1.84
0.51 0.88 1.32 2.06 W10x19 0.59 0.51 0.74 1.10 1.76
0.51 0.88 1.32 2.06 W10x22 0.59 0.51 0.74 1.10 1.76
0.47 0.81 1.22 1.90 W10x26 0.69 0.47 0.68 1.02 1.63
0.44 0.76 1.13 1.76 W10x30 0.79 0.44 0.63 0.94 1.51
0.45 0.77 1.15 1.79 W10x33 0.77 0.45 0.64 0.96 1.53
0.41 0.70 1.05 1.63 W10x39 0.90 0.41 0.58 0.88 1.40
0.38 0.64 0.97 1.50 W10x46 1.03 0.38 0.54 0.81 1.29
0.39 0.66 0.99 1.54 W10x49 0.99 0.39 0.55 0.83 1.32
0.38 0.62 0.93 1.45 W10x54 1.09 0.38 0.52 0.78 1.24
0.38 0.58 0.88 1.36 W10x60 1.20 0.38 0.49 0.73 1.17
0.38 0.54 0.80 1.25 W10x68 1.36 0.38 0.45 0.67 1.07
0.38 0.50 0.74 1.16 W10x77 1.52 0.38 0.41 0.62 0.99
0.38 0.45 0.68 1.06 W10x88 1.72 0.38 0.38 0.57 0.91
0.38 0.42 0.62 0.97 W10x100 1.93 0.38 0.38 0.52 0.83
0.38 0.38 0.57 0.89 W10x112 2.14 0.38 0.38 0.48 0.77
0.61 1.05 1.58 2.45 W12x14 0.40 0.61 0.88 1.31 2.10
0.58 1.00 1.50 2.33 W12x16 0.45 0.58 0.83 1.25 2.00
0.54 0.93 1.39 2.17 W12x19 0.53 0.54 0.77 1.16 1.86
0.51 0.87 1.30 2.02 W12x22 0.61 0.51 0.72 1.08 1.74
0.51 0.88 1.31 2.04 W12x26 0.60 0.51 0.73 1.09 1.75
0.47 0.81 1.22 1.90 W12x30 0.69 0.47 0.68 1.02 1.63

0.44 0.76 1.13 1.76 W12x35 0.79 0.44 0.63 0.94 1.51
0.42 0.72 1.09 1.69 W12x40 0.85 0.42 0.60 0.91 1.45
0.40 0.68 1.02 1.58 W12x45 0.95 0.40 0.56 0.85 1.35
0.38 0.64 0.96 1.49 W12x50 1.04 0.38 0.53 0.80 1.28
0.39 0.66 0.99 1.54 W12x53 0.99 0.39 0.55 0.83 1.32
0.38 0.64 0.96 1.49 W12x54 1.04 0.38 0.53 0.80 1.28
0.38 0.63 0.94 1.46 W12x58 1.08 0.38 0.52 0.78 1.25
0.38 0.62 0.93 1.45 W12x65 1.09 0.38 0.52 0.78 1.24
0.38 0.58 0.88 1.36 W12x72 1.20 0.38 0.49 0.73 1.17
0.38 0.55 0.82 1.28 W12x79 1.32 0.38 0.46 0.68 1.09
0.38 0.51 0.77 1.20 W12x87 1.44 0.38 0.43 0.64 1.03
0.38 0.48 0.73 1.13 W12x96 1.57 0.38 0.40 0.60 0.97
0.38 0.45 0.68 1.05 W12x106 1.73 0.38 0.38 0.56 0.90
0.38 0.41 0.62 0.96 W12x120 1.94 0.38 0.38 0.52 0.83
0.38 0.38 0.57 0.88 W12x136 2.17 0.38 0.38 0.47 0.76
0.38 0.38 0.53 0.82 W12x152 2.40 0.38 0.38 0.44 0.70
0.38 0.38 0.48 0.75 W12x170 2.66 0.38 0.38 0.40 0.64
0.38 0.38 0.45 0.69 W12x190 2.93 0.38 0.38 0.38 0.59
0.38 0.38 0.41 0.64 W12x210 3.21 0.38 0.38 0.38 0.55
0.38 0.38 0.39 0.60 W12x230 3.47 0.38 0.38 0.38 0.52
0.38 0.38 0.38 0.56 W12x262 3.76 0.38 0.38 0.38 0.48
0.38 0.38 0.38 0.52 W12x279 4.10 0.38 0.38 0.38 0.45
0.38 0.38 0.38 0.49 W12x305 4.41 0.38 0.38 0.38 0.42
0.38 0.38 0.38 0.46 W12x336 4.78 0.38 0.38 0.38 0.39
0.55 0.94 1.41 2.19 W14x22 0.52 0.55 0.78 1.17 1.88
0.51 0.87 1.30 2.02 W14x26 0.61 0.51 0.72 1.08 1.74
0.50 0.85 1.28 1.99 W14x30 0.63 0.50 0.71 1.07 1.71
0.47 0.80 1.20 1.87 W14x34 0.71 0.47 0.67 1.00 1.60
0.44 0.76 1.13 1.76 W14x38 0.79 0.44 0.63 0.94 1.51
0.42 0.72 1.09 1.69 W14x43 0.85 0.42 0.60 0.91 1.45
0.40 0.68 1.02 1.59 W14x48 0.94 0.40 0.57 0.85 1.36
0.38 0.64 0.97 1.50 W14x53 1.03 0.38 0.54 0.81 1.29
0.38 0.63 0.94 1.47 W14x61 1.07 0.38 0.52 0.79 1.26
0.38 0.59 0.88 1.37 W14x68 1.19 0.38 0.49 0.73 1.17
0.38 0.56 0.84 1.30 W14x74 1.28 0.38 0.47 0.70 1.12
0.38 0.52 0.78 1.22 W14x82 1.41 0.38 0.44 0.65 1.04
0.38 0.56 0.84 1.31 W14x90 1.27 0.38 0.47 0.70 1.12
0.38 0.53 0.79 1.23 W14x99 1.39 0.38 0.44 0.66 1.06
0.38 0.49 0.74 1.15 W14x109 1.53 0.38 0.41 0.62 0.99
0.38 0.46 0.69 1.08 W14x120 1.67 0.38 0.39 0.58 0.93
0.38 0.43 0.65 1.01 W14x132 1.83 0.38 0.38 0.54 0.86
0.38 0.41 0.62 0.96 W14x145 1.94 0.38 0.38 0.52 0.83
0.38 0.39 0.58 0.90 W14x159 2.11 0.38 0.38 0.48 0.77
0.38 0.38 0.55 0.86 W14x176 2.25 0.38 0.38 0.46 0.74
0.38 0.38 0.54 0.84 W14x193 2.32 0.38 0.38 0.45 0.72

0.38 0.38 0.47 0.73 W14x211 2.74 0.38 0.38 0.39 0.63
0.38 0.38 0.44 0.68 W14x233 3.00 0.38 0.38 0.38 0.58
0.38 0.38 0.41 0.63 W14x257 3.27 0.38 0.38 0.38 0.54
0.38 0.38 0.38 0.59 W14x283 3.57 0.38 0.38 0.38 0.50
0.38 0.38 0.38 0.55 W14x311 3.88 0.38 0.38 0.38 0.47
0.38 0.38 0.38 0.51 W14x342 4.21 0.38 0.38 0.38 0.44
0.38 0.38 0.38 0.48 W14x370 4.51 0.38 0.38 0.38 0.41
0.38 0.38 0.38 0.45 W14x398 4.80 0.38 0.38 0.38 0.39
0.38 0.38 0.38 0.43 W14x426 5.09 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.41 W14x455 5.38 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 W14x500 5.82 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 W14x550 6.30 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 W14x605 6.80 0.38 0.38 0.38 0.38
0.53 0.91 1.37 2.13 W16x26 0.55 0.53 0.76 1.14 1.83
0.49 0.84 1.26 1.96 W16x31 0.65 0.49 0.70 1.05 1.68
0.47 0.81 1.22 1.90 W16x36 0.69 0.47 0.68 1.02 1.63
0.45 0.77 1.16 1.80 W16x40 0.76 0.45 0.64 0.97 1.54
0.42 0.72 1.09 1.69 W16x45 0.85 0.42 0.60 0.91 1.45
0.40 0.68 1.02 1.59 W16x50 0.94 0.40 0.57 0.85 1.36
0.38 0.63 0.94 1.47 W16x67 1.07 0.38 0.52 0.79 1.26
0.38 0.63 0.94 1.47 W16x77 1.07 0.38 0.52 0.79 1.26
0.38 0.58 0.87 1.35 W16x89 1.22 0.38 0.48 0.72 1.15
0.38 0.49 0.73 1.13 W16x100 1.56 0.38 0.41 0.61 0.97
0.49 0.83 1.25 1.94 W18x35 0.66 0.49 0.69 1.04 1.67
0.45 0.77 1.16 1.80 W18x40 0.76 0.45 0.64 0.97 1.54
0.42 0.72 1.08 1.68 W18x46 0.86 0.42 0.60 0.90 1.44
0.42 0.71 1.07 1.67 W18x50 0.87 0.42 0.60 0.89 1.43
0.40 0.68 1.02 1.58 W18x55 0.95 0.40 0.56 0.85 1.35
0.38 0.64 0.97 1.50 W18x60 1.03 0.38 0.54 0.81 1.29
0.38 0.61 0.92 1.43 W18x65 1.11 0.38 0.51 0.77 1.23
0.38 0.58 0.87 1.35 W18x71 1.21 0.38 0.48 0.73 1.16
0.38 0.61 0.92 1.43 W18x76 1.11 0.38 0.51 0.77 1.23
0.38 0.57 0.86 1.33 W18x88 1.24 0.38 0.48 0.71 1.14
0.38 0.53 0.79 1.23 W18x97 1.39 0.38 0.44 0.66 1.06
0.38 0.50 0.74 1.16 W18x106 1.52 0.38 0.41 0.62 0.99
0.38 0.46 0.69 1.07 W18x119 1.68 0.38 0.38 0.58 0.92
0.46 0.79 1.18 1.84 W21x44 0.73 0.46 0.66 0.99 1.58
0.43 0.73 1.10 1.71 W21x50 0.83 0.43 0.61 0.92 1.47
0.40 0.69 1.03 1.60 W21x57 0.93 0.40 0.57 0.86 1.37
0.40 0.68 1.02 1.59 W21x62 0.94 0.40 0.57 0.85 1.36
0.38 0.64 0.97 1.50 W21x68 1.03 0.38 0.54 0.81 1.29
0.38 0.57 0.86 1.33 W21x83 1.24 0.38 0.48 0.71 1.14
0.38 0.53 0.80 1.24 W21x93 1.38 0.38 0.44 0.66 1.06
0.38 0.56 0.83 1.30 W21x101 1.29 0.38 0.46 0.69 1.11
0.38 0.52 0.78 1.22 W21x111 1.41 0.38 0.44 0.65 1.04

0.38 0.49 0.74 1.14 W21x122 1.54 0.38 0.41 0.61 0.98
0.38 0.46 0.70 1.08 W21x132 1.66 0.38 0.39 0.58 0.93
0.38 0.43 0.65 1.01 W21x147 1.83 0.38 0.38 0.54 0.86
0.43 0.74 1.11 1.73 W24x55 0.82 0.43 0.62 0.92 1.48
0.40 0.69 1.04 1.61 W24x62 0.92 0.40 0.58 0.86 1.38
0.40 0.69 1.03 1.60 W24x68 0.93 0.40 0.57 0.86 1.37
0.38 0.65 0.97 1.51 W24x76 1.02 0.38 0.54 0.81 1.30
0.38 0.61 0.91 1.42 W24x84 1.13 0.38 0.51 0.76 1.21
0.38 0.56 0.85 1.32 W24x94 1.26 0.38 0.47 0.71 1.13
0.38 0.58 0.87 1.35 W24x104 1.22 0.38 0.48 0.72 1.15
0.38 0.54 0.80 1.25 W24x117 1.36 0.38 0.45 0.67 1.07
0.38 0.50 0.74 1.16 W24x131 1.52 0.38 0.41 0.62 0.99
0.38 0.46 0.69 1.07 W24x146 1.68 0.38 0.38 0.58 0.92
0.38 0.43 0.64 1.00 W24x162 1.85 0.38 0.38 0.54 0.86
0.38 0.65 0.97 1.51 W27x84 1.02 0.38 0.54 0.81 1.30
0.38 0.61 0.91 1.42 W27x94 1.13 0.38 0.51 0.76 1.21
0.38 0.57 0.86 1.34 W27x102 1.23 0.38 0.48 0.72 1.15
0.38 0.54 0.80 1.25 W27x114 1.36 0.38 0.45 0.67 1.07
0.38 0.49 0.74 1.15 W27x146 1.53 0.38 0.41 0.62 0.99
0.38 0.46 0.69 1.07 W27x161 1.68 0.38 0.38 0.58 0.92
0.38 0.43 0.64 1.00 W27x178 1.85 0.38 0.38 0.54 0.86
0.38 0.62 0.93 1.44 W30x99 1.10 0.38 0.51 0.77 1.24
0.38 0.58 0.88 1.36 W30x108 1.20 0.38 0.49 0.73 1.17
0.38 0.56 0.84 1.30 W30x116 1.28 0.38 0.47 0.70 1.12
0.38 0.53 0.80 1.24 W30x124 1.37 0.38 0.44 0.67 1.07
0.38 0.51 0.76 1.19 W30x132 1.46 0.38 0.42 0.64 1.02
0.38 0.46 0.70 1.08 W30x173 1.66 0.38 0.39 0.58 0.93
0.38 0.43 0.65 1.01 W30x191 1.82 0.38 0.38 0.54 0.87
0.38 0.40 0.61 0.94 W30x211 2.00 0.38 0.38 0.50 0.81
0.38 0.59 0.88 1.37 W33x118 1.19 0.38 0.49 0.73 1.17
0.38 0.55 0.82 1.28 W33x130 1.31 0.38 0.46 0.69 1.10
0.38 0.52 0.78 1.22 W33x141 1.41 0.38 0.44 0.65 1.04
0.38 0.50 0.75 1.16 W33x152 1.51 0.38 0.41 0.62 1.00
0.38 0.44 0.66 1.03 W33x201 1.78 0.38 0.38 0.55 0.88
Design No. S740 - Beam-only Design for Roofs
Unrestrained Beam Rating Restrained Beam Rating**
0.56 0.91 1.40 2.24 W4x13 0.65 0.56 0.77 1.19 1.89
0.56 0.91 1.40 2.24 W5x16 0.65 0.56 0.77 1.19 1.89
0.51 0.84 1.29 2.06 W5x19 0.76 0.51 0.71 1.09 1.74
0.71 1.15 1.77 2.83 W6x9 0.39 0.71 0.97 1.50 2.39
0.63 1.02 1.58 2.52 W6x12 0.51 0.63 0.87 1.34 2.13
0.56 0.90 1.39 2.22 W6x16 0.66 0.56 0.76 1.18 1.88
0.55 0.90 1.38 2.20 W6x20 0.67 0.55 0.76 1.17 1.86
0.49 0.80 1.23 1.97 W6x26 0.82 0.49 0.68 1.05 1.66
0.72 1.17 1.80 2.89 W8x10 0.37 0.72 0.99 1.53 2.44
0.65 1.06 1.64 2.62 W8x13 0.47 0.65 0.90 1.39 2.21
0.61 1.00 1.54 2.46 W8x15 0.54 0.61 0.84 1.30 2.07
0.60 0.97 1.50 2.39 W8x18 0.57 0.60 0.82 1.27 2.02
0.56 0.90 1.39 2.22 W8x21 0.66 0.56 0.76 1.18 1.88
0.54 0.88 1.36 2.17 W8x24 0.69 0.54 0.75 1.15 1.83
0.50 0.81 1.25 2.00 W8x28 0.80 0.50 0.69 1.06 1.69
0.50 0.82 1.26 2.01 W8x31 0.79 0.50 0.69 1.07 1.70
0.47 0.77 1.18 1.89 W8x35 0.88 0.47 0.65 1.01 1.60
0.44 0.71 1.09 1.75 W8x40 1.00 0.44 0.60 0.93 1.48
0.39 0.64 0.98 1.57 W8x48 1.18 0.39 0.54 0.84 1.33
0.38 0.57 0.87 1.39 W8x58 1.41 0.38 0.48 0.74 1.18
0.38 0.51 0.79 1.27 W8x67 1.61 0.38 0.44 0.67 1.07
0.71 1.16 1.79 2.86 W10x12 0.38 0.71 0.98 1.52 2.41
0.65 1.05 1.62 2.59 W10x15 0.48 0.65 0.89 1.38 2.19
0.61 1.00 1.54 2.46 W10x17 0.54 0.61 0.84 1.30 2.07
0.59 0.96 1.47 2.35 W10x19 0.59 0.59 0.81 1.25 1.99
0.59 0.96 1.47 2.35 W10x22 0.59 0.59 0.81 1.25 1.99
0.54 0.88 1.36 2.17 W10x26 0.69 0.54 0.75 1.15 1.83
0.50 0.82 1.26 2.01 W10x30 0.79 0.50 0.69 1.07 1.70
0.51 0.83 1.28 2.04 W10x33 0.77 0.51 0.70 1.09 1.72
0.47 0.76 1.17 1.87 W10x39 0.90 0.47 0.64 0.99 1.58
0.43 0.70 1.07 1.72 W10x46 1.03 0.43 0.59 0.91 1.45
0.44 0.72 1.10 1.76 W10x49 0.99 0.44 0.61 0.94 1.49
0.41 0.67 1.04 1.66 W10x54 1.09 0.41 0.57 0.88 1.40
0.39 0.63 0.97 1.56 W10x60 1.20 0.39 0.53 0.83 1.31
0.38 0.58 0.89 1.43 W10x68 1.36 0.38 0.49 0.76 1.21
0.38 0.54 0.83 1.32 W10x77 1.52 0.38 0.45 0.70 1.11
0.38 0.49 0.75 1.21 W10x88 1.72 0.38 0.41 0.64 1.02
0.38 0.45 0.69 1.11 W10x100 1.93 0.38 0.38 0.59 0.93
0.38 0.42 0.64 1.02 W10x112 2.14 0.38 0.38 0.54 0.86
0.70 1.14 1.75 2.80 W12x14 0.40 0.70 0.96 1.49 2.36
0.67 1.08 1.67 2.67 W12x16 0.45 0.67 0.92 1.42 2.25
0.62 1.01 1.55 2.48 W12x19 0.53 0.62 0.85 1.32 2.09
0.58 0.94 1.45 2.31 W12x22 0.61 0.58 0.80 1.23 1.95
0.58 0.95 1.46 2.33 W12x26 0.60 0.58 0.80 1.24 1.97
0.54 0.88 1.36 2.17 W12x30 0.69 0.54 0.75 1.15 1.83
0.50 0.82 1.26 2.01 W12x35 0.79 0.50 0.69 1.07 1.70
0.48 0.78 1.21 1.93 W12x40 0.85 0.48 0.66 1.03 1.63
0.45 0.73 1.13 1.81 W12x45 0.95 0.45 0.62 0.96 1.52
0.43 0.69 1.07 1.71 W12x50 1.04 0.43 0.59 0.91 1.44
0.44 0.72 1.10 1.76 W12x53 0.99 0.44 0.61 0.94 1.49
0.43 0.69 1.07 1.71 W12x54 1.04 0.43 0.59 0.91 1.44
0.42 0.68 1.04 1.67 W12x58 1.08 0.42 0.57 0.89 1.41
0.41 0.67 1.04 1.66 W12x65 1.09 0.41 0.57 0.88 1.40
0.39 0.63 0.97 1.56 W12x72 1.20 0.39 0.53 0.83 1.31
0.38 0.59 0.91 1.46 W12x79 1.32 0.38 0.50 0.77 1.23
0.38 0.56 0.86 1.37 W12x87 1.44 0.38 0.47 0.73 1.16
0.38 0.52 0.81 1.29 W12x96 1.57 0.38 0.44 0.69 1.09
0.38 0.49 0.75 1.20 W12x106 1.73 0.38 0.41 0.64 1.01
0.38 0.45 0.69 1.10 W12x120 1.94 0.38 0.38 0.59 0.93
0.38 0.41 0.63 1.01 W12x136 2.17 0.38 0.38 0.54 0.85
0.38 0.38 0.58 0.93 W12x152 2.40 0.38 0.38 0.50 0.79
0.38 0.38 0.54 0.86 W12x170 2.66 0.38 0.38 0.46 0.72
0.38 0.38 0.50 0.79 W12x190 2.93 0.38 0.38 0.42 0.67
0.38 0.38 0.46 0.73 W12x210 3.21 0.38 0.38 0.39 0.62
0.38 0.38 0.43 0.69 W12x230 3.47 0.38 0.38 0.38 0.58
0.38 0.38 0.40 0.64 W12x262 3.76 0.38 0.38 0.38 0.54
0.38 0.38 0.38 0.60 W12x279 4.10 0.38 0.38 0.38 0.50
0.38 0.38 0.38 0.56 W12x305 4.41 0.38 0.38 0.38 0.47
0.38 0.38 0.38 0.52 W12x336 4.78 0.38 0.38 0.38 0.44
0.63 1.02 1.56 2.50 W14x22 0.52 0.63 0.86 1.33 2.11
0.58 0.94 1.45 2.31 W14x26 0.61 0.58 0.80 1.23 1.95
0.57 0.92 1.42 2.28 W14x30 0.63 0.57 0.78 1.21 1.92
0.53 0.87 1.34 2.14 W14x34 0.71 0.53 0.73 1.14 1.80
0.50 0.82 1.26 2.01 W14x38 0.79 0.50 0.69 1.07 1.70
0.48 0.78 1.21 1.93 W14x43 0.85 0.48 0.66 1.03 1.63
0.45 0.74 1.14 1.82 W14x48 0.94 0.45 0.63 0.97 1.53
0.43 0.70 1.07 1.72 W14x53 1.03 0.43 0.59 0.91 1.45
0.42 0.68 1.05 1.68 W14x61 1.07 0.42 0.58 0.89 1.41
0.39 0.64 0.98 1.56 W14x68 1.19 0.39 0.54 0.83 1.32
0.38 0.61 0.93 1.49 W14x74 1.28 0.38 0.51 0.79 1.26
0.38 0.57 0.87 1.39 W14x82 1.41 0.38 0.48 0.74 1.18
0.38 0.61 0.94 1.50 W14x90 1.27 0.38 0.51 0.80 1.26
0.38 0.57 0.88 1.41 W14x99 1.39 0.38 0.48 0.75 1.19
0.38 0.53 0.82 1.31 W14x109 1.53 0.38 0.45 0.70 1.11
0.38 0.50 0.77 1.23 W14x120 1.67 0.38 0.42 0.66 1.04
0.38 0.47 0.72 1.15 W14x132 1.83 0.38 0.40 0.61 0.97
0.38 0.45 0.69 1.10 W14x145 1.94 0.38 0.38 0.59 0.93
0.38 0.42 0.65 1.03 W14x159 2.11 0.38 0.38 0.55 0.87
0.38 0.40 0.61 0.98 W14x176 2.25 0.38 0.38 0.52 0.83
0.38 0.39 0.60 0.96 W14x193 2.32 0.38 0.38 0.51 0.81
0.38 0.38 0.52 0.84 W14x211 2.74 0.38 0.38 0.45 0.71
0.38 0.38 0.49 0.78 W14x233 3.00 0.38 0.38 0.41 0.66
0.38 0.38 0.45 0.72 W14x257 3.27 0.38 0.38 0.38 0.61
0.38 0.38 0.42 0.67 W14x283 3.57 0.38 0.38 0.38 0.57
0.38 0.38 0.39 0.63 W14x311 3.88 0.38 0.38 0.38 0.53
0.38 0.38 0.38 0.58 W14x342 4.21 0.38 0.38 0.38 0.49
0.38 0.38 0.38 0.55 W14x370 4.51 0.38 0.38 0.38 0.46
0.38 0.38 0.38 0.52 W14x398 4.80 0.38 0.38 0.38 0.44
0.38 0.38 0.38 0.49 W14x426 5.09 0.38 0.38 0.38 0.42
0.38 0.38 0.38 0.47 W14x455 5.38 0.38 0.38 0.38 0.40
0.38 0.38 0.38 0.44 W14x500 5.82 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.41 W14x550 6.30 0.38 0.38 0.38 0.38
0.38 0.38 0.38 0.38 W14x605 6.80 0.38 0.38 0.38 0.38
0.61 0.99 1.52 2.43 W16x26 0.55 0.61 0.84 1.29 2.05
0.56 0.91 1.40 2.24 W16x31 0.65 0.56 0.77 1.19 1.89
0.54 0.88 1.36 2.17 W16x36 0.69 0.54 0.75 1.15 1.83
0.51 0.84 1.29 2.06 W16x40 0.76 0.51 0.71 1.09 1.74
0.48 0.78 1.21 1.93 W16x45 0.85 0.48 0.66 1.03 1.63
0.45 0.74 1.14 1.82 W16x50 0.94 0.45 0.63 0.97 1.53
0.42 0.68 1.05 1.68 W16x67 1.07 0.42 0.58 0.89 1.41
0.42 0.68 1.05 1.68 W16x77 1.07 0.42 0.58 0.89 1.41
0.38 0.63 0.96 1.54 W16x89 1.22 0.38 0.53 0.82 1.30
0.38 0.53 0.81 1.30 W16x100 1.56 0.38 0.45 0.69 1.09
0.56 0.90 1.39 2.22 W18x35 0.66 0.56 0.76 1.18 1.88
0.51 0.84 1.29 2.06 W18x40 0.76 0.51 0.71 1.09 1.74
0.48 0.78 1.20 1.92 W18x46 0.86 0.48 0.66 1.02 1.62
0.48 0.77 1.19 1.90 W18x50 0.87 0.48 0.65 1.01 1.61
0.45 0.73 1.13 1.81 W18x55 0.95 0.45 0.62 0.96 1.52
0.43 0.70 1.07 1.72 W18x60 1.03 0.43 0.59 0.91 1.45
0.41 0.67 1.02 1.64 W18x65 1.11 0.41 0.56 0.87 1.38
0.39 0.63 0.97 1.55 W18x71 1.21 0.39 0.53 0.82 1.31
0.41 0.67 1.02 1.64 W18x76 1.11 0.41 0.56 0.87 1.38
0.38 0.62 0.95 1.52 W18x88 1.24 0.38 0.52 0.81 1.28
0.38 0.57 0.88 1.41 W18x97 1.39 0.38 0.48 0.75 1.19
0.38 0.54 0.83 1.32 W18x106 1.52 0.38 0.45 0.70 1.11
0.38 0.50 0.77 1.23 W18x119 1.68 0.38 0.42 0.65 1.04
0.53 0.86 1.32 2.11 W21x44 0.73 0.53 0.72 1.12 1.78
0.49 0.80 1.22 1.96 W21x50 0.83 0.49 0.67 1.04 1.65
0.46 0.74 1.14 1.83 W21x57 0.93 0.46 0.63 0.97 1.54
0.45 0.74 1.14 1.82 W21x62 0.94 0.45 0.63 0.97 1.53
0.43 0.70 1.07 1.72 W21x68 1.03 0.43 0.59 0.91 1.45
0.38 0.62 0.95 1.52 W21x83 1.24 0.38 0.52 0.81 1.28
0.38 0.57 0.88 1.41 W21x93 1.38 0.38 0.49 0.75 1.19
0.38 0.60 0.93 1.48 W21x101 1.29 0.38 0.51 0.79 1.25
0.38 0.57 0.87 1.39 W21x111 1.41 0.38 0.48 0.74 1.18

0.38 0.53 0.82 1.31 W21x122 1.54 0.38 0.45 0.70 1.10
0.38 0.50 0.77 1.24 W21x132 1.66 0.38 0.43 0.66 1.05
0.38 0.47 0.72 1.15 W21x147 1.83 0.38 0.40 0.61 0.97
0.49 0.80 1.23 1.97 W24x55 0.82 0.49 0.68 1.05 1.66
0.46 0.75 1.15 1.84 W24x62 0.92 0.46 0.63 0.98 1.55
0.46 0.74 1.14 1.83 W24x68 0.93 0.46 0.63 0.97 1.54
0.43 0.70 1.08 1.73 W24x76 1.02 0.43 0.59 0.92 1.46
0.40 0.66 1.01 1.62 W24x84 1.13 0.40 0.56 0.86 1.37
0.38 0.61 0.94 1.51 W24x94 1.26 0.38 0.52 0.80 1.27
0.38 0.63 0.96 1.54 W24x104 1.22 0.38 0.53 0.82 1.30
0.38 0.58 0.89 1.43 W24x117 1.36 0.38 0.49 0.76 1.21
0.38 0.54 0.83 1.32 W24x131 1.52 0.38 0.45 0.70 1.11
0.38 0.50 0.77 1.23 W24x146 1.68 0.38 0.42 0.65 1.04
0.38 0.46 0.71 1.14 W24x162 1.85 0.38 0.39 0.61 0.96
0.43 0.70 1.08 1.73 W27x84 1.02 0.43 0.59 0.92 1.46
0.40 0.66 1.01 1.62 W27x94 1.13 0.40 0.56 0.86 1.37
0.38 0.62 0.96 1.53 W27x102 1.23 0.38 0.53 0.81 1.29
0.38 0.58 0.89 1.43 W27x114 1.36 0.38 0.49 0.76 1.21
0.38 0.53 0.82 1.31 W27x146 1.53 0.38 0.45 0.70 1.11
0.38 0.50 0.77 1.23 W27x161 1.68 0.38 0.42 0.65 1.04
0.38 0.46 0.71 1.14 W27x178 1.85 0.38 0.39 0.61 0.96
0.41 0.67 1.03 1.65 W30x99 1.10 0.41 0.57 0.88 1.39
0.39 0.63 0.97 1.56 W30x108 1.20 0.39 0.53 0.83 1.31
0.38 0.61 0.93 1.49 W30x116 1.28 0.38 0.51 0.79 1.26
0.38 0.58 0.89 1.42 W30x124 1.37 0.38 0.49 0.76 1.20
0.38 0.55 0.85 1.36 W30x132 1.46 0.38 0.47 0.72 1.15
0.38 0.50 0.77 1.24 W30x173 1.66 0.38 0.43 0.66 1.05
0.38 0.47 0.72 1.16 W30x191 1.82 0.38 0.40 0.61 0.98
0.38 0.44 0.67 1.08 W30x211 2.00 0.38 0.38 0.57 0.91
0.39 0.64 0.98 1.56 W33x118 1.19 0.39 0.54 0.83 1.32
0.38 0.60 0.92 1.47 W33x130 1.31 0.38 0.50 0.78 1.24
0.38 0.57 0.87 1.39 W33x141 1.41 0.38 0.48 0.74 1.18
0.38 0.54 0.83 1.33 W33x152 1.51 0.38 0.46 0.70 1.12
0.38 0.48 0.74 1.18 W33x201 1.78 0.38 0.40 0.63 0.99
*Thickness applied to beam lower flange edges shall be a minimum of 3/8-in. (0.375-in.)
**When used to adjust the material thickness for a Restrained beam the use of this procedure is limited to
steel sections classified as compact in accordance with the Specification for the Design of Structural
Steel Buildings by the American Institute of Steel Construction. Refer to the UL Fire Resistance Directory.
Southwest Fireproofing Type 5 GP, Type 5 MD, Type 7 GP & Type 7 HD
Design No. X771 - Pipe Columns
Standard Weight Pipe

Size Thickness, in. , Required for Size and Rating Indicated
Nom. Diameter, in. Wall Thickness A/P 1 Hour 1.5 Hour 2 Hour 3 Hour 4 Hour
2.50 0.203 0.19 0.950 1.544 2.139 3.327 NR
3 0.216 0.2 0.903 1.467 2.032 3.160 NR
3.50 0.226 0.21 0.860 1.397 1.935 3.010 NR
4 0.237 0.22 0.821 1.334 1.847 2.873 NR
5 0.258 0.24 0.752 1.223 1.693 2.634 3.574
6 0.28 0.27 0.669 1.087 1.505 2.341 3.177
8 0.322 0.31 0.583 0.947 1.311 2.039 2.767
10 0.365 0.35 0.516 0.838 1.161 1.806 2.451
12 0.375 0.36 0.502 0.815 1.129 1.756 2.383
NR - Not Rated
Extra Strong Pipe

1.50 0.2 0.17 1.062 1.726 2.390 3.718 NR
2 0.218 0.19 0.950 1.544 2.139 3.327 NR
2.50 0.276 0.25 0.722 1.174 1.625 2.528 3.431
3 0.3 0.27 0.669 1.087 1.505 2.341 3.177
3.50 0.318 0.29 0.623 1.012 1.401 2.179 2.958
4 0.337 0.31 0.583 0.947 1.311 2.039 2.767
5 0.375 0.35 0.516 0.838 1.161 1.806 2.451
6 0.432 0.4 0.451 0.734 1.016 1.580 2.144
6 0.864 0.74 0.250 0.397 0.549 0.854 1.159
8 0.5 0.47 0.384 0.624 0.865 1.345 1.825
10 0.5 0.48 0.376 0.611 0.847 1.317 1.787
12 0.5 0.48 0.376 0.611 0.847 1.317 1.787
NR - Not Rated
Double Extra Strong Pipe

2 0.436 0.34 0.531 0.863 1.195 1.859 2.523
2.50 0.552 0.43 0.420 0.682 0.945 1.470 1.995
3 0.6 0.48 0.376 0.611 0.847 1.317 1.787
4 0.674 0.56 0.322 0.524 0.726 1.129 1.532
5 0.75 0.64 0.282 0.459 0.635 0.988 1.340
6 0.864 0.74 0.250 0.397 0.549 0.854 1.159
8 0.875 0.78 0.250 0.376 0.521 0.810 1.100
These column protection thicknesses have been calculated for the convenience of users, in accordance with
the proprietary equation in UL Design No. X771, as detailed in the UL FireResistance Directory.
While we have taken care to be as accurate as possible, we will not be held responsible for errors or omissions.
If any discrepancy is found between this table and the UL Design information, the UL Design information governs.
UL Design X771 - Rectangular Tube Steel Columns
Size Thickness, in. Required for Size and Rating Indicated

Wall, in. Member A/P 1 Hr 1.5 Hr 2 Hr 3 Hr 4 Hr
3/16 4x3 0.18 1.00 1.63 2.26 3.51 NR
1/4 4x3 0.23 0.79 1.28 1.77 2.75 3.73
3/16 5x3 0.18 1.00 1.63 2.26 3.51 NR
1/4 5x3 0.23 0.79 1.28 1.77 2.75 3.73
5/16 5x3 0.29 0.62 1.01 1.40 2.18 2.96
3/8 5x3 0.34 0.53 0.86 1.20 1.86 2.52
1/2 5x3 0.44 0.41 0.67 0.92 1.44 1.95
3/16 5x4 0.18 1.00 1.63 2.26 3.51 NR
1/4 5x4 0.24 0.75 1.22 1.69 2.63 3.57
5/16 5x4 0.29 0.62 1.01 1.40 2.18 2.96
3/8 5x4 0.34 0.53 0.86 1.20 1.86 2.52
3/16 6x3 0.18 1.00 1.63 2.26 3.51 NR
1/4 6x3 0.24 0.75 1.22 1.69 2.63 3.57
5/16 6x3 0.29 0.62 1.01 1.40 2.18 2.96
3/8 6x3 0.34 0.53 0.86 1.20 1.86 2.52
1/2 6x3 0.44 0.41 0.67 0.92 1.44 1.95
3/16 6x4 0.18 1.00 1.63 2.26 3.51 NR
1/4 6x4 0.24 0.75 1.22 1.69 2.63 3.57
5/16 6x4 0.29 0.62 1.01 1.40 2.18 2.96
3/8 6x4 0.35 0.52 0.84 1.16 1.81 2.45
1/2 6x4 0.45 0.40 0.65 0.90 1.40 1.91
3/16 7x5 0.18 1.00 1.63 2.26 3.51 NR
1/4 7x5 0.24 0.75 1.22 1.69 2.63 3.57
5/16 7x5 0.3 0.60 0.98 1.35 2.11 2.86
3/8 7x5 0.35 0.52 0.84 1.16 1.81 2.45
1/2 7x5 0.48 0.38 0.61 0.85 1.32 1.79
3/16 8x3 0.18 1.00 1.63 2.26 3.51 NR
1/4 8x3 0.24 0.75 1.22 1.69 2.63 3.57
5/16 8x3 0.35 0.52 0.84 1.16 1.81 2.45
3/8 8x3 0.45 0.40 0.65 0.90 1.40 1.91
3/16 8x4 0.18 1.00 1.63 2.26 3.51 NR
1/4 8x4 0.24 0.75 1.22 1.69 2.63 3.57
5/16 8x4 0.3 0.60 0.98 1.35 2.11 2.86
3/8 8x4 0.35 0.52 0.84 1.16 1.81 2.45
1/2 8x4 0.46 0.39 0.64 0.88 1.37 1.86
3/16 8x6 0.18 1.00 1.63 2.26 3.51 NR
1/4 8x6 0.24 0.75 1.22 1.69 2.63 3.57
5/16 8x6 0.3 0.60 0.98 1.35 2.11 2.86
3/8 8x6 0.35 0.52 0.84 1.16 1.81 2.45
1/2 8x6 0.46 0.39 0.64 0.88 1.37 1.86
3/16 10x4 0.18 1.00 1.63 2.26 3.51 NR
1/4 10x4 0.24 0.75 1.22 1.69 2.63 3.57
5/16 10x4 0.3 0.60 0.98 1.35 2.11 2.86
3/8 10x4 0.35 0.52 0.84 1.16 1.81 2.45
1/2 10x4 0.46 0.39 0.64 0.88 1.37 1.86
NR - Not Rated

3/16 10x6 0.18 1.00 1.63 2.26 3.51 NR
1/4 10x6 0.24 0.75 1.22 1.69 2.63 3.57
5/16 10x6 0.3 0.60 0.98 1.35 2.11 2.86
3/8 10x6 0.35 0.52 0.84 1.16 1.81 2.45
1/2 10x6 0.46 0.39 0.64 0.88 1.37 1.86
3/16 10x8 0.18 1.00 1.63 2.26 3.51 NR
1/4 10x8 0.24 0.75 1.22 1.69 2.63 3.57
5/16 10x8 0.3 0.60 0.98 1.35 2.11 2.86
3/8 10x8 0.36 0.50 0.82 1.13 1.76 2.38
1/2 10x8 0.47 0.38 0.62 0.86 1.34 1.83
3/16 12x4 0.18 1.00 1.63 2.26 3.51 NR
1/4 12x4 0.24 0.75 1.22 1.69 2.63 3.57
5/16 12x4 0.3 0.60 0.98 1.35 2.11 2.86
3/8 12x4 0.35 0.52 0.84 1.16 1.81 2.45
1/2 12x4 0.46 0.39 0.64 0.88 1.37 1.86
3/16 12x6 0.18 1.00 1.63 2.26 3.51 NR
1/4 12x6 0.24 0.75 1.22 1.69 2.63 3.57
5/16 12x6 0.3 0.60 0.98 1.35 2.11 2.86
3/8 12x6 0.36 0.50 0.82 1.13 1.76 2.38
1/2 12x6 0.47 0.38 0.62 0.86 1.34 1.83
1/4 12x8 0.24 0.75 1.22 1.69 2.63 3.57
5/16 12x8 0.3 0.60 0.98 1.35 2.11 2.86
3/8 12x8 0.36 0.50 0.82 1.13 1.76 2.38
1/2 12x8 0.48 0.38 0.61 0.85 1.32 1.79
5/8 12x8 0.59 0.31 0.50 0.69 1.07 1.45
1/4 14x4 0.24 0.75 1.22 1.69 2.63 3.57
5/16 14x4 0.3 0.60 0.98 1.35 2.11 2.86
3/8 14x4 0.36 0.50 0.82 1.13 1.76 2.38
1/2 14x4 0.47 0.38 0.62 0.86 1.34 1.83
1/4 14x6 0.24 0.75 1.22 1.69 2.63 3.57
5/16 14x6 0.3 0.60 0.98 1.35 2.11 2.86
3/8 14x6 0.36 0.50 0.82 1.13 1.76 2.38
1/2 14x6 0.48 0.38 0.61 0.85 1.32 1.79
5/16 14x10 0.3 0.60 0.98 1.35 2.11 2.86
3/8 14x10 0.36 0.50 0.82 1.13 1.76 2.38
1/2 14x10 0.47 0.38 0.62 0.86 1.34 1.83
5/16 16x4 0.3 0.60 0.98 1.35 2.11 2.86
3/8 16x4 0.36 0.50 0.82 1.13 1.76 2.38
1/2 16x4 0.48 0.38 0.61 0.85 1.32 1.79
5/16 16x8 0.3 0.60 0.98 1.35 2.11 2.86
3/8 16x8 0.36 0.50 0.82 1.13 1.76 2.38
1/2 16x8 0.47 0.38 0.62 0.86 1.34 1.83
5/16 16x12 0.31 0.58 0.95 1.31 2.04 2.77
3/8 16x12 0.36 0.50 0.82 1.13 1.76 2.38
1/2 16x12 0.48 0.38 0.61 0.85 1.32 1.79
NR - Not Rated

5/16 18x6 0.30 0.60 0.98 1.35 2.11 2.86
3/8 18x6 0.36 0.50 0.82 1.13 1.76 2.38
1/2 18x6 0.47 0.38 0.62 0.86 1.34 1.83
5/16 20x4 0.3 0.60 0.98 1.35 2.11 2.86
3/8 20x4 0.36 0.50 0.82 1.13 1.76 2.38
1/2 20x4 0.47 0.38 0.62 0.86 1.34 1.83
5/16 20x8 0.31 0.58 0.95 1.31 2.04 2.77
3/8 20x8 0.36 0.50 0.82 1.13 1.76 2.38
1/2 20x8 0.48 0.38 0.61 0.85 1.32 1.79
5/16 20x12 0.31 0.58 0.95 1.31 2.04 2.77
3/8 20x12 0.37 0.49 0.79 1.10 1.71 2.32
1/2 20x12 0.48 0.38 0.61 0.85 1.32 1.79
5/16 20x18 0.49 0.37 0.60 0.83 1.29 1.75
3/8 20x18 0.37 0.49 0.79 1.10 1.71 2.32
1/2 20x18 0.31 0.58 0.95 1.31 2.04 2.77
5/16 22x20 0.31 0.58 0.95 1.31 2.04 2.77
3/8 22x20 0.37 0.49 0.79 1.10 1.71 2.32
1/2 22x20 0.49 0.37 0.60 0.83 1.29 1.75
5/16 24x22 0.31 0.58 0.95 1.31 2.04 2.77
3/8 24x22 0.37 0.49 0.79 1.10 1.71 2.32
1/2 24x22 0.49 0.37 0.60 0.83 1.29 1.75
5/16 26x24 0.31 0.58 0.95 1.31 2.04 2.77
3/8 26x24 0.37 0.49 0.79 1.10 1.71 2.32
1/2 26x24 0.49 0.37 0.60 0.83 1.29 1.75
5/16 28x24 0.31 0.58 0.95 1.31 2.04 2.77
3/8 28x24 0.37 0.49 0.79 1.10 1.71 2.32
1/2 28x24 0.49 0.37 0.60 0.83 1.29 1.75
5/16 30x24 0.31 0.58 0.95 1.31 2.04 2.77
3/8 30x30 0.37 0.49 0.79 1.10 1.71 2.32
1/2 30x30 0.49 0.37 0.60 0.83 1.29 1.75
These column protection thicknesses have been calculated for the convenience of users, in accordance
with the proprietary equation in UL Design No. X771, as detailed in the UL FireResistance Directory.
While we have taken care to be as accurate as possible, we will not be held responsible
for errors or omissions. If any discrepancy is found between this table and the UL Design information,
the UL Design information shall govern.
Design No. X771 - Square Tube Steel Column

1/4 2x2 0.22 0.82 1.33 1.85 2.87 3.90
5/16 2x2 0.26 0.69 1.13 1.56 2.43 3.30
1/4 2.5x2.5 0.23 0.79 1.28 1.77 2.75 3.73
5/16 2.5x2.5 0.27 0.67 1.09 1.50 2.34 3.18
3/16 3x3 0.18 1.00 1.63 2.26 3.51 NR
1/4 3x3 0.23 0.79 1.28 1.77 2.75 3.73
5/16 3x3 0.28 0.64 1.05 1.45 2.26 3.06
3/8 3x3 0.33 0.55 0.89 1.23 1.92 2.60
1/2 3x3 0.42 0.43 0.70 0.97 1.50 2.04
3/16 3.5x3.5 0.18 1.00 1.63 2.26 3.51 NR
1/4 3.5x3.5 0.23 0.79 1.28 1.77 2.75 3.73
5/16 3.5x3.5 0.28 0.64 1.05 1.45 2.26 3.06
3/16 4x4 0.18 1.00 1.63 2.26 3.51 NR
1/4 4x4 0.23 0.79 1.28 1.77 2.75 3.73
5/16 4x4 0.29 0.62 1.01 1.40 2.18 2.96
3/8 4x4 0.34 0.53 0.86 1.20 1.86 2.52
1/2 4x4 0.44 0.41 0.67 0.92 1.44 1.95
3/16 4.5x4.5 0.18 1.00 1.63 2.26 3.51 NR
1/4 4.5x4.5 0.24 0.75 1.22 1.69 2.63 3.57
5/16 4.5x4.5 0.29 0.62 1.01 1.40 2.18 2.96
3/8 4.5x4.5 0.34 0.53 0.86 1.20 1.86 2.52
3/16 5x5 0.18 1.00 1.63 2.26 3.51 NR
1/4 5x5 0.24 0.75 1.22 1.69 2.63 3.57
5/16 5x5 0.29 0.62 1.01 1.40 2.18 2.96
3/8 5x5 0.35 0.52 0.84 1.16 1.81 2.45
1/2 5x5 0.45 0.40 0.65 0.90 1.40 1.91
3/16 5.5x5.5 0.18 1.00 1.63 2.26 3.51 NR
1/4 5.5x5.5 0.24 0.75 1.22 1.69 2.63 3.57
5/16 5.5x5.5 0.29 0.62 1.01 1.40 2.18 2.96
3/8 5.5x5.5 0.35 0.52 0.84 1.16 1.81 2.45
3/16 6x6 0.18 1.00 1.63 2.26 3.51 NR
1/4 6x6 0.24 0.75 1.22 1.69 2.63 3.57
5/16 6x6 0.3 0.60 0.98 1.35 2.11 2.86
3/8 6x6 0.35 0.52 0.84 1.16 1.81 2.45
1/2 6x6 0.48 0.38 0.61 0.85 1.32 1.79
5/8 6x6 0.56 0.32 0.52 0.73 1.13 1.53
3/16 7x7 0.18 1.00 1.63 2.26 3.51 NR
1/4 7x7 0.24 0.75 1.22 1.69 2.63 3.57
5/16 7x7 0.3 0.60 0.98 1.35 2.11 2.86
3/8 7x7 0.35 0.52 0.84 1.16 1.81 2.45
1/2 7x7 0.46 0.39 0.64 0.88 1.37 1.86
5/8 7x7 0.57 0.32 0.51 0.71 1.11 1.50
3/16 8x8 0.18 1.00 1.63 2.26 3.51 NR
1/4 8x8 0.24 0.75 1.22 1.69 2.63 3.57
5/16 8x8 0.3 0.60 0.98 1.35 2.11 2.86
Design No. X771 - Square Tube Steel Column

3/8 8x8 0.35 0.52 0.84 1.16 1.81 2.45
1/2 8x8 0.46 0.39 0.64 0.88 1.37 1.86
5/8 8x8 0.58 0.31 0.51 0.70 1.09 1.48
3/16 10x10 0.18 1.00 1.63 2.26 3.51 NR
1/4 10x10 0.24 0.75 1.22 1.69 2.63 3.57
5/16 10x10 0.3 0.60 0.98 1.35 2.11 2.86
3/8 10x10 0.36 0.50 0.82 1.13 1.76 2.38
1/2 10x10 0.48 0.38 0.61 0.85 1.32 1.79
5/8 10x10 0.59 0.31 0.50 0.69 1.07 1.45
1/4 12x12 0.24 0.75 1.22 1.69 2.63 3.57
5/16 12x12 0.3 0.60 0.98 1.35 2.11 2.86
3/8 12x12 0.36 0.50 0.82 1.13 1.76 2.38
1/2 12x12 0.47 0.38 0.62 0.86 1.34 1.83
5/8 12x12 0.59 0.31 0.50 0.69 1.07 1.45
5/16 14x14 0.31 0.58 0.95 1.31 2.04 2.77
3/8 14x14 0.36 0.50 0.82 1.13 1.76 2.38
1/2 14x14 0.48 0.38 0.61 0.85 1.32 1.79
5/8 14x14 0.6 0.30 0.49 0.68 1.05 1.43
5/16 16x16 0.31 0.58 0.95 1.31 2.04 2.77
3/8 16x16 0.37 0.49 0.79 1.10 1.71 2.32
1/2 16x16 0.48 0.38 0.61 0.85 1.32 1.79
5/8 16x16 0.6 0.30 0.49 0.68 1.05 1.43
5/16 18x18 0.31 0.58 0.95 1.31 2.04 2.77
3/8 18x18 0.37 0.49 0.79 1.10 1.71 2.32
1/2 18x18 0.49 0.37 0.60 0.83 1.29 1.75
5/8 18x18 0.6 0.30 0.49 0.68 1.05 1.43
3/8 20x20 0.37 0.49 0.79 1.10 1.71 2.32
1/2 20x20 0.49 0.37 0.60 0.83 1.29 1.75
5/8 20x20 0.61 0.30 0.48 0.67 1.04 1.41
3/4 20x20 0.72 0.25 0.41 0.56 0.88 1.19
1.00 20x20 0.95 0.19 0.31 0.43 0.67 0.90
3/8 22x22 0.37 0.49 0.79 1.10 1.71 2.32
1/2 22x22 0.49 0.37 0.60 0.83 1.29 1.75
5/8 22x22 0.61 0.30 0.48 0.67 1.04 1.41
3/8 24x24 0.37 0.49 0.79 1.10 1.71 2.32
1/2 24x24 0.49 0.37 0.60 0.83 1.29 1.75
5/8 24x24 0.61 0.30 0.48 0.67 1.04 1.41
3/4 24x24 0.73 0.25 0.40 0.56 0.87 1.18
1.00 24x24 0.96 0.25 0.31 0.42 0.66 0.89
1/2 26x26 0.49 0.37 0.60 0.83 1.29 1.75
5/8 26x26 0.61 0.30 0.48 0.67 1.04 1.41
3/4 26x26 0.73 0.25 0.40 0.56 0.87 1.18
7/8 26x26 0.86 0.25 0.34 0.47 0.73 1.00
1.00 26x26 0.96 0.25 0.31 0.42 0.66 0.89
1/2 28x28 0.49 0.37 0.60 0.83 1.29 1.75
5/8 28x28 0.61 0.30 0.48 0.67 1.04 1.41
3/4 28x28 0.73 0.25 0.40 0.56 0.87 1.18
7/8 28x28 0.85 0.25 0.35 0.48 0.74 1.01
1.00 28x28 0.96 0.25 0.31 0.42 0.66 0.89
1/2 30x30 0.49 0.37 0.60 0.83 1.29 1.75
5/8 30x30 0.61 0.30 0.48 0.67 1.04 1.41
3/4 30x30 0.73 0.25 0.40 0.56 0.87 1.18
7/8 30x30 0.85 0.25 0.35 0.48 0.74 1.01
1.00 30x30 0.97 0.25 0.30 0.42 0.65 0.88
1.25 30x30 1.2 0.25 0.25 0.34 0.53 0.71
1/2 32x32 0.49 0.37 0.60 0.83 1.29 1.75
3/4 32x32 0.73 0.25 0.40 0.56 0.87 1.18
7/8 32x32 0.85 0.25 0.35 0.48 0.74 1.01
1.00 32x32 0.97 0.25 0.30 0.42 0.65 0.88
1.25 32x32 1.2 0.25 0.25 0.34 0.53 0.71
1.50 32x32 1.43 0.25 0.25 0.28 0.44 0.60
1.75 32x32 1.66 0.25 0.25 0.24 0.38 0.52
2.00 32x32 1.88 0.25 0.25 0.22 0.34 0.46
These column protection thicknesses have been calculated for the convenience of users, in accordance
with the proprietary equation in UL Design No. X771, as detailed in the UL FireResistance Directory.
for errors or omissions. If any discrepancy is found between this table and the UL Design information,
Design Y725 - Column
Minimum Thickness, in., Required on Column for Size and Rating Indicated
W4x13 0.54 0.67 1.01 1.35 2.02 2.70
W5x16 0.54 0.67 1.01 1.35 2.02 2.70
W5x19 0.64 0.63 0.95 1.26 1.89 2.53
W6x9 0.33 0.79 1.18 1.56 2.36 3.14
W6x12 0.44 0.72 1.08 1.45 2.17 2.89
W6x16 0.57 0.66 0.99 1.31 1.98 2.63
W6x20 0.56 0.67 1.00 1.33 2.00 2.66
W6x26 0.68 0.62 0.92 1.23 1.85 2.46
W8x10 0.32 0.79 1.19 1.58 2.37 3.17
W8x13 0.41 0.74 1.11 1.48 2.22 2.96
W8x15 0.47 0.71 1.06 1.41 2.12 2.83
W8x18 0.49 0.70 1.05 1.40 2.09 2.79
W8x21 0.57 0.66 0.99 1.31 1.98 2.63
W8x24 0.58 0.66 0.98 1.31 1.97 2.63
W8x28 0.67 0.62 0.93 1.24 1.86 2.48
W8x31 0.65 0.63 0.94 1.26 1.88 2.51
W8x35 0.73 0.60 0.90 1.20 1.79 2.39
W8x40 0.83 0.56 0.85 1.13 1.69 2.25
W8x48 0.98 0.52 0.78 1.04 1.56 2.08
W8x58 1.17 0.47 0.71 0.95 1.42 1.89
W8x67 1.34 0.44 0.66 0.88 1.31 1.75
W10x12 0.34 0.78 1.17 1.56 2.34 3.12
W10x15 0.42 0.73 1.10 1.47 2.20 2.93
W10x17 0.48 0.70 1.05 1.40 2.11 2.81
W10x19 0.53 0.68 1.02 1.36 2.04 2.71
W10x22 0.51 0.69 1.03 1.38 2.06 2.75
W10x26 0.60 0.65 0.97 1.30 1.94 2.59
W10x30 0.69 0.61 0.92 1.22 1.84 2.45
W10x33 0.65 0.63 0.94 1.26 1.88 2.51
W10x39 0.76 0.59 0.88 1.17 1.76 2.35
W10x46 0.87 0.55 0.83 1.10 1.65 2.21
W10x49 0.83 0.56 0.85 1.13 1.69 2.25
W10x54 0.91 0.54 0.81 1.08 1.62 2.16
W10x60 1.00 0.51 0.77 1.03 1.54 2.06
W10x68 1.13 0.48 0.72 0.96 1.45 1.93
W10x77 1.26 0.45 0.68 0.91 1.36 1.82
W10x88 1.43 0.42 0.63 0.84 1.26 1.69
W10x100 1.60 0.39 0.59 0.79 1.18 1.57
W10x112 1.78 0.37 0.55 0.73 1.10 1.47
W12x14 0.36 0.77 1.15 1.53 2.30 3.07
W12x16 0.41 0.74 1.11 1.48 2.22 2.96
W12x19 0.48 0.70 1.05 1.40 2.11 2.81
W12x22 0.55 0.67 1.00 1.34 2.01 2.68
W12x26 0.52 0.68 1.02 1.37 2.05 2.73
W12x30 0.60 0.65 0.97 1.30 1.94 2.59
W12x35 0.69 0.61 0.92 1.22 1.84 2.45
W12x40 0.72 0.60 0.90 1.20 1.80 2.40
W12x45 0.81 0.57 0.86 1.14 1.71 2.28
W12x50 0.89 0.50 0.82 1.09 1.64 2.18
W12x53 0.84 0.50 0.84 1.12 1.68 2.24
W12x54 0.84 0.50 0.84 1.12 1.68 2.24
W12x58 0.91 0.50 0.81 1.08 1.62 2.16
W12x65 0.91 0.50 0.81 1.08 1.62 2.16
W12x72 1.01 0.50 0.77 1.02 1.54 2.05
W12x79 1.09 0.49 0.74 0.98 1.48 1.97
W12x87 1.20 0.47 0.70 0.93 1.40 1.87
W12x96 1.32 0.44 0.66 0.88 1.33 1.77
W12x106 1.44 0.42 0.63 0.84 1.26 1.68
W12x120 1.61 0.39 0.59 0.78 1.18 1.57
W12x136 1.82 0.36 0.54 0.72 1.09 1.45
W12x152 2.01 0.34 0.51 0.68 1.02 1.35
W12x170 2.22 0.32 0.47 0.63 0.95 1.26
W12x190 2.46 0.29 0.44 0.59 0.88 1.18
W12x210 2.69 0.25 0.41 0.55 0.83 1.10
W12x230 2.92 0.25 0.39 0.52 0.78 1.04
W12x262 3.15 0.25 0.37 0.49 0.73 0.98
W12x279 3.43 0.25 0.34 0.46 0.69 0.91
W12x305 3.70 0.25 0.32 0.43 0.65 0.86
W12x336 4.01 0.25 0.30 0.40 0.61 0.81
W14x22 0.47 0.71 1.06 1.41 2.12 2.83
W14x26 0.55 0.67 1.00 1.34 2.01 2.68
W14x30 0.55 0.67 1.00 1.34 2.01 2.68
W14x34 0.63 0.64 0.95 1.27 1.91 2.54
W14x38 0.70 0.61 0.91 1.22 1.83 2.43
W14x43 0.73 0.60 0.90 1.20 1.79 2.39
W14x48 0.82 0.57 0.85 1.13 1.70 2.27
W14x53 0.90 0.50 0.81 1.09 1.63 2.17
W14x61 0.91 0.50 0.81 1.08 1.62 2.16
W14x68 1.01 0.50 0.77 1.02 1.54 2.05
W14x74 1.09 0.49 0.74 0.98 1.48 1.97
W14x82 1.21 0.46 0.70 0.93 1.39 1.86
W14x90 1.06 0.50 0.75 1.00 1.50 2.00
W14x99 1.15 0.48 0.72 0.96 1.43 1.91
W14x109 1.26 0.45 0.68 0.91 1.36 1.82
W14x120 1.39 0.43 0.64 0.86 1.29 1.71
W14x132 1.52 0.41 0.61 0.81 1.22 1.62
W14x145 1.61 0.39 0.59 0.78 1.18 1.57
W14x159 1.75 0.37 0.56 0.74 1.11 1.49
W14x176 1.93 0.35 0.52 0.70 1.04 1.39
W14x193 2.09 0.33 0.49 0.66 0.99 1.32
W14x211 2.28 0.31 0.47 0.62 0.93 1.24
W14x228 2.49 0.25 0.44 0.58 0.87 1.19
W14x233 2.50 0.25 0.44 0.56 0.87 1.19
W14x257 2.72 0.25 0.41 0.55 0.82 1.09
W14x283 2.97 0.25 0.38 0.51 0.77 1.02
W14x311 3.23 0.25 0.36 0.48 0.72 0.96
W14x342 3.51 0.25 0.34 0.45 0.67 0.90
W14x370 3.76 0.25 0.32 0.43 0.64 0.85
W14x398 4.00 0.25 0.30 0.40 0.61 0.81
W14x426 4.24 0.25 0.29 0.39 0.58 0.77
W14x455 4.48 0.25 0.28 0.37 0.55 0.74
W14x500 4.86 0.25 0.26 0.34 0.52 0.69
W14x550 5.25 0.25 0.25 0.32 0.48 0.65
W14x605 5.71 0.25 0.25 0.30 0.45 0.60
W14x665 6.21 0.25 0.25 0.28 0.42 0.56
W14x730 6.62 0.25 0.25 0.26 0.38 0.50
W14x808 7.28 0.25 0.25 0.24 0.38 0.50
W16x26 0.49 0.70 1.05 1.40 2.09 2.79
W16x31 0.58 0.66 0.98 1.31 1.97 2.63
W16x36 0.61 0.64 0.97 1.29 1.93 2.57
W16x40 0.67 0.62 0.93 1.24 1.86 2.48
W16x45 0.76 0.59 0.88 1.17 1.76 2.35
W16x50 0.83 0.50 0.85 1.13 1.69 2.25
W16x57 0.96 0.50 0.79 1.13 1.69 2.25
W16x67 0.92 0.50 0.81 1.07 1.61 2.15
W16x77 1.05 0.50 0.75 1.00 1.51 2.01
W16x89 1.20 0.47 0.70 0.93 1.40 1.87
W16x100 1.34 0.44 0.66 0.88 1.31 1.75
W18x35 0.59 0.65 0.98 1.30 1.96 2.61
W18x40 0.68 0.62 0.92 1.23 1.85 2.46
W18x46 0.78 0.58 0.87 1.16 1.74 2.32
W18x50 0.77 0.58 0.88 1.17 1.75 2.33
W18x55 0.84 0.50 0.84 1.12 1.68 2.24
W18x60 0.91 0.50 0.81 1.08 1.62 2.16
W18x65 0.98 0.50 0.78 1.04 1.56 2.08
W18x71 1.07 0.50 0.75 0.99 1.49 1.99
W18x76 0.95 0.50 0.79 1.06 1.58 2.11
W18x88 1.07 0.50 0.75 0.99 1.49 1.99
W18x97 1.20 0.47 0.70 0.93 1.40 1.87
W18x106 1.30 0.45 0.67 0.89 1.34 1.78
W18x119 1.46 0.42 0.62 0.83 1.25 1.66
W18x130 1.61 0.39 0.59 0.78 1.18 1.57
W18x143 1.77 0.37 0.55 0.74 1.11 1.47
W18x158 1.93 0.35 0.52 0.70 1.04 1.39
W18x175 2.12 0.33 0.49 0.65 0.98 1.31
W18x192 2.27 0.31 0.47 0.62 0.93 1.25
W18x211 2.47 0.29 0.44 0.59 0.88 1.17
W18x234 2.71 0.27 0.41 0.55 0.82 1.10
W18x258 2.95 0.26 0.39 0.51 0.77 1.03
W18x283 3.20 0.24 0.36 0.48 0.72 0.97
W18x311 3.47 0.23 0.34 0.45 0.68 0.91
W21x44 0.66 0.62 0.94 1.25 1.87 2.49
W21x50 0.75 0.59 0.89 1.18 1.77 2.36
W21x57 0.85 0.50 0.84 1.12 1.67 2.23
W21x62 0.84 0.50 0.84 1.12 1.68 2.24
W21x68 0.91 0.50 0.81 1.08 1.62 2.16
W21x83 1.10 0.49 0.73 0.98 1.47 1.96
W21x93 1.23 0.46 0.69 0.92 1.38 1.84
W21x101 1.11 0.49 0.73 0.97 1.46 1.95
W21x111 1.21 0.46 0.70 0.93 1.39 1.86
W21x122 1.33 0.44 0.66 0.88 1.32 1.76
W21x132 1.43 0.42 0.63 0.84 1.26 1.69
W21x147 1.59 0.39 0.59 0.79 1.18 1.58
W21x166 1.81 0.36 0.54 0.73 1.09 1.45
W21x182 1.97 0.34 0.52 0.69 1.03 1.37
W21x201 2.16 0.32 0.48 0.64 0.97 1.29
W24x55 0.74 0.59 0.89 1.19 1.78 2.38
W24x62 0.83 0.56 0.85 1.13 1.69 2.25
W24x68 0.82 0.57 0.85 1.13 1.70 2.27
W24x76 0.92 0.54 0.81 1.07 1.61 2.15
W24x84 1.01 0.51 0.77 1.02 1.54 2.05
W24x94 1.12 0.48 0.73 0.97 1.45 1.94
W24x103 1.25 0.46 0.68 0.91 1.37 1.82
W24x104 1.06 0.50 0.75 1.00 1.50 2.00
W24x117 1.19 0.47 0.70 0.94 1.41 1.88
W24x131 1.32 0.44 0.66 0.88 1.33 1.77
W24x146 1.46 0.42 0.62 0.83 1.25 1.66
W24x162 1.61 0.39 0.59 0.78 1.18 1.57
W24x176 1.77 0.37 0.55 0.74 1.11 1.47
W24x192 1.92 0.35 0.52 0.70 1.05 1.40
W24x207 2.05 0.33 0.50 0.67 1.00 1.34
W24x229 2.27 0.31 0.47 0.62 0.93 1.25
W24x250 2.45 0.29 0.44 0.59 0.88 1.18
W24x279 2.71 0.27 0.41 0.55 0.82 1.10
W24x306 2.94 0.26 0.39 0.52 0.77 1.03
W24x335 3.19 0.24 0.36 0.48 0.73 0.97
W24x370 3.46 0.23 0.34 0.45 0.68 0.91
W24x408 3.74 0.21 0.32 0.43 0.64 0.85
W24x492 4.40 0.19 0.28 0.37 0.56 0.75
W27x84 0.91 0.54 0.81 1.08 1.62 2.16
W27x94 1.01 0.51 0.77 1.02 1.54 2.05
W27x102 1.09 0.49 0.74 0.98 1.48 1.97
W27x114 1.21 0.46 0.70 0.93 1.39 1.86
W27x129 1.39 0.43 0.64 0.86 1.29 1.71
W27x146 1.33 0.44 0.66 0.88 1.32 1.76
W27x161 1.47 0.41 0.62 0.83 1.24 1.66
W27x178 1.61 0.39 0.59 0.78 1.18 1.57
W27x194 1.76 0.37 0.55 0.74 1.11 1.48
W27x217 1.97 0.34 0.52 0.69 1.03 1.37
W27x235 2.12 0.33 0.49 0.65 0.98 1.31
W27x258 2.30 0.31 0.46 0.62 0.93 1.23
W27x281 2.49 0.29 0.44 0.58 0.87 1.17
W27x307 2.72 0.27 0.41 0.55 0.82 1.09
W27x336 2.92 0.26 0.39 0.52 0.78 1.04
W27x368 3.17 0.24 0.36 0.49 0.73 0.97
W27x448 3.76 0.21 0.32 0.43 0.64 0.85
W27x539 4.45 0.19 0.28 0.37 0.56 0.74
W30x90 0.91 0.54 0.81 1.08 1.62 2.16
W30x99 0.99 0.52 0.78 1.03 1.55 2.07
W30x108 1.07 0.50 0.75 0.99 1.49 1.99
W30x116 1.15 0.48 0.72 0.96 1.43 1.91
W30x124 1.23 0.46 0.69 0.92 1.38 1.84
W30x132 1.30 0.45 0.67 0.89 1.34 1.78
W30x148 1.47 0.41 0.62 0.83 1.24 1.66
W30x173 1.44 0.42 0.63 0.84 1.26 1.68
W30x191 1.59 0.39 0.59 0.79 1.18 1.58
W30x211 1.74 0.37 0.56 0.75 1.12 1.49
W30x235 1.96 0.34 0.52 0.69 1.03 1.38
W30x261 2.16 0.32 0.48 0.64 0.97 1.29
W30x292 2.39 0.30 0.45 0.60 0.90 1.20
W30x326 2.65 0.28 0.42 0.56 0.84 1.11
W30x357 2.88 0.26 0.39 0.52 0.78 1.05
W30x391 3.13 0.25 0.37 0.49 0.74 0.98
W30x477 3.71 0.21 0.32 0.43 0.64 0.86
W33x118 1.07 0.50 0.75 0.99 1.49 1.99
W33x130 1.17 0.47 0.71 0.95 1.42 1.89
W33x141 1.27 0.45 0.68 0.90 1.36 1.81
W33x152 1.35 0.44 0.65 0.87 1.31 1.74
W33x169 1.52 0.41 0.61 0.81 1.22 1.62
W33x201 1.58 0.40 0.59 0.79 1.19 1.59
W33x221 1.73 0.37 0.56 0.75 1.12 1.50
W33x241 1.87 0.36 0.53 0.71 1.07 1.42
W33x263 2.04 0.34 0.50 0.67 1.01 1.34
W33x291 2.24 0.31 0.47 0.63 0.94 1.26
W33x318 2.43 0.30 0.44 0.59 0.89 1.19
W33x354 2.68 0.28 0.41 0.55 0.83 1.10
W33x387 2.91 0.26 0.39 0.52 0.78 1.04
W36x135 1.15 0.48 0.72 0.96 1.43 1.91
W36x150 1.27 0.45 0.68 0.90 1.36 1.81
W36x160 1.35 0.44 0.65 0.87 1.31 1.74
W36x170 1.43 0.42 0.63 0.84 1.26 1.69
W36x182 1.52 0.41 0.61 0.81 1.22 1.62
W36x194 1.62 0.39 0.59 0.78 1.17 1.56
W36x210 1.74 0.37 0.56 0.75 1.12 1.49
W36x230 1.69 0.38 0.57 0.76 1.14 1.52
W36x232 1.92 0.35 0.52 0.70 1.05 1.40
W36x245 1.79 0.37 0.55 0.73 1.10 1.46
W36x256 2.10 0.33 0.49 0.66 0.99 1.31

W36x260 1.90 0.35 0.53 0.70 1.06 1.41
W36x280 2.03 0.34 0.50 0.67 1.01 1.35
W36x300 2.17 0.32 0.48 0.64 0.96 1.29
W36x328 2.36 0.30 0.45 0.61 0.91 1.21
W36x359 2.57 0.28 0.43 0.57 0.85 1.14
W36x393 2.80 0.27 0.40 0.53 0.80 1.07
W36x439 3.10 0.25 0.37 0.49 0.74 0.99
W36x527 3.65 0.22 0.33 0.44 0.65 0.87
W36x650 4.41 0.19 0.28 0.37 0.56 0.75
W36x798 5.28 0.16 0.24 0.32 0.48 0.64
W36x848 5.57 0.15 0.23 0.31 0.46 0.61
W40x149 1.22 0.46 0.69 0.92 1.39 1.85
W40x167 1.36 0.43 0.65 0.87 1.30 1.74
W40x174 1.26 0.45 0.68 0.91 1.36 1.82
W40x183 1.48 0.41 0.62 0.83 1.24 1.65
W40x199 1.45 0.42 0.63 0.84 1.25 1.67
W40x211 1.70 0.38 0.57 0.76 1.14 1.51
W40x215 1.56 0.40 0.60 0.80 1.20 1.60
W40x235 1.87 0.36 0.53 0.71 1.07 1.42
W40x249 1.79 0.37 0.55 0.73 1.10 1.46
W40x264 2.10 0.33 0.49 0.66 0.99 1.31
W40x277 1.99 0.34 0.51 0.68 1.02 1.36
W40x278 2.20 0.32 0.48 0.64 0.95 1.27
W40x297 2.14 0.32 0.49 0.65 0.97 1.30
W40x321 2.26 0.31 0.47 0.62 0.94 1.25
W40x324 2.31 0.31 0.46 0.61 0.92 1.23
W40x327 2.56 0.29 0.43 0.57 0.86 1.14
W40x331 2.59 0.28 0.42 0.57 0.85 1.13
W40x362 2.57 0.28 0.43 0.57 0.85 1.14
W40x372 2.64 0.28 0.42 0.56 0.84 1.12
W40x392 3.02 0.25 0.38 0.50 0.76 1.01
W40x397 2.80 0.27 0.40 0.53 0.80 1.07
W40x431 3.01 0.25 0.38 0.51 0.76 1.01
W40x466 3.53 0.22 0.34 0.45 0.67 0.89
W40x503 3.49 0.23 0.34 0.45 0.68 0.90
W40x593 4.03 0.20 0.30 0.40 0.60 0.80
W44x230 1.58 0.40 0.59 0.79 1.19 1.59
W44x262 1.78 0.37 0.55 0.73 1.10 1.47
W44x290 1.97 0.34 0.52 0.69 1.03 1.37
W44x335 2.25 0.31 0.47 0.63 0.94 1.25
These column protection thicknesses have been determined for the convenience of users, in accordance with
the table and proprietary equation in Design Y725, as detailed in the UL Fire Resistance Directory.
for errors or omissions. If any discrepancy is found between these tables and the UL Design information,
Minimum Thickness, in., Required on Column When Flange Tip Thickness is Reduced by one-half*
W6x9 0.33 0.88 1.25 1.63 2.44 3.19
W6x12 0.44 0.88 1.25 1.63 2.44 3.19
W6x16 0.57 0.75 1.06 1.38 2.06 2.69
W6x20 0.56 0.88 1.25 1.63 2.44 3.19
W6x26 0.68 0.69 1.06 1.38 2.06 2.63
W8x10 0.32 0.88 1.25 1.63 2.44 3.19
W8x13 0.41 0.88 1.25 1.63 2.44 3.19
W8x15 0.47 0.88 1.25 1.63 2.44 3.19
W8x18 0.49 0.88 1.25 1.63 2.44 3.19
W8x21 0.57 0.75 1.06 1.38 2.06 2.69
W8x24 0.58 0.75 1.06 1.38 2.06 2.69
W8x28 0.67 0.69 1.06 1.38 2.06 2.63
W8x31 0.65 0.75 1.06 1.38 2.06 2.69
W8x35 0.73 0.69 1.06 1.38 2.06 2.63
W8x40 0.83 0.56 1.06 1.38 2.06 2.50
W8x48 0.98 0.56 1.06 1.38 2.06 2.50
W8x58 1.17 0.56 1.06 1.38 2.06 2.50
W8x67 1.34 0.56 1.06 1.38 2.06 2.50
W10x12 0.34 0.88 1.25 1.63 2.44 3.19
W10x15 0.42 0.88 1.25 1.63 2.44 3.19
W10x17 0.48 0.88 1.25 1.63 2.44 3.19
W10x19 0.53 0.88 1.25 1.63 2.44 3.19
W10x22 0.51 0.88 1.25 1.63 2.44 3.19
W10x26 0.60 0.75 1.06 1.38 2.06 2.69
W10x30 0.69 0.69 1.06 1.38 2.06 2.63
W10x33 0.65 0.75 1.06 1.38 2.06 2.69
W10x39 0.76 0.69 1.06 1.38 2.06 2.63
W10x46 0.87 0.56 1.06 1.38 2.06 2.50
W10x49 0.83 0.56 1.06 1.38 2.06 2.50
W10x54 0.91 0.56 1.06 1.38 2.06 2.50
W10x60 1.00 0.56 1.06 1.38 2.06 2.50
W10x68 1.13 0.56 1.06 1.38 2.06 2.50
W10x77 1.26 0.56 1.06 1.38 2.06 2.50
W10x88 1.43 0.56 1.06 1.38 2.06 2.50
W10x100 1.60 0.56 1.06 1.38 2.06 2.50
W10x112 1.78 0.56 1.06 1.38 2.06 2.50
W12x14 0.36 0.88 1.25 1.63 2.44 3.19
W12x16 0.41 0.88 1.25 1.63 2.44 3.19
W12x19 0.48 0.88 1.25 1.63 2.44 3.19
W12x22 0.55 0.88 1.25 1.63 2.44 3.19
W12x26 0.52 0.88 1.25 1.63 2.44 3.19
W12x30 0.60 0.75 1.06 1.38 2.06 2.69
W12x35 0.69 0.69 1.06 1.38 2.06 2.63
W12x40 0.72 0.69 1.06 1.38 2.06 2.63
W12x45 0.81 0.69 1.06 1.38 2.06 2.63
W12x50 0.89 0.56 1.06 1.38 2.06 2.50
W12x53 0.84 0.56 1.06 1.38 2.06 2.50
W12x54 0.84 0.56 1.06 1.38 2.06 2.50
W12x58 0.91 0.56 1.06 1.38 2.06 2.50
W12x65 0.91 0.56 1.06 1.38 2.06 2.50
W12x72 1.01 0.56 1.06 1.38 2.06 2.50
W12x79 1.09 0.56 1.06 1.38 2.06 2.50
W12x87 1.20 0.56 1.06 1.38 2.06 2.50
W12x96 1.32 0.56 1.06 1.38 2.06 2.50
W12x106 1.44 0.56 1.06 1.38 2.06 2.50
W12x120 1.61 0.56 1.06 1.38 2.06 2.50
W12x136 1.82 0.56 1.06 1.38 2.06 2.50
W12x152 2.01 0.56 1.06 1.38 2.06 2.50
W12x170 2.22 0.56 1.06 1.38 2.06 2.50
W12x190 2.46 0.56 1.06 1.38 2.06 2.50
W12x210 2.69 0.25 0.44 0.69 1.19 1.56
W12x230 2.92 0.25 0.44 0.69 1.19 1.56
W12x262 3.15 0.25 0.44 0.69 1.19 1.56
W12x279 3.43 0.25 0.44 0.69 1.19 1.56
W12x305 3.70 0.25 0.44 0.69 1.19 1.56
W12x336 4.01 0.25 0.44 0.69 1.19 1.56
W14x22 0.47 0.88 1.25 1.63 2.44 3.19
W14x26 0.55 0.88 1.25 1.63 2.44 3.19
W14x30 0.55 0.88 1.25 1.63 2.44 3.19
W14x34 0.63 0.75 1.06 1.38 2.06 2.69
W14x38 0.70 0.69 1.06 1.38 2.06 2.63
W14x43 0.73 0.69 1.06 1.38 2.06 2.63
W14x48 0.82 0.69 1.06 1.38 2.06 2.63
W14x53 0.90 0.56 1.06 1.38 2.06 2.50
W14x61 0.91 0.56 1.06 1.38 2.06 2.50
W14x68 1.01 0.56 1.06 1.38 2.06 2.50
W14x74 1.09 0.56 1.06 1.38 2.06 2.50
W14x82 1.21 0.56 1.06 1.38 2.06 2.50
W14x90 1.06 0.56 1.06 1.38 2.06 2.50
W14x99 1.15 0.56 1.06 1.38 2.06 2.50
W14x109 1.26 0.56 1.06 1.38 2.06 2.50
W14x120 1.39 0.56 1.06 1.38 2.06 2.50
W14x132 1.52 0.56 1.06 1.38 2.06 2.50
W14x145 1.61 0.56 1.06 1.38 2.06 2.50
W14x159 1.75 0.56 1.06 1.38 2.06 2.50
W14x176 1.93 0.56 1.06 1.38 2.06 2.50
W14x193 2.09 0.56 1.06 1.38 2.06 2.50
W14x211 2.28 0.56 1.06 1.38 2.06 2.50
W14x233 2.49 0.25 0.44 0.69 1.19 1.56
W14x257 2.72 0.25 0.44 0.69 1.19 1.56
W14x283 2.97 0.25 0.44 0.69 1.19 1.56
W14x311 3.23 0.25 0.44 0.69 1.19 1.56
W14x342 3.51 0.25 0.44 0.69 1.19 1.56
W14x370 3.76 0.25 0.44 0.69 1.19 1.56
W14x398 4.00 0.25 0.44 0.69 1.19 1.56
W14x426 4.24 0.25 0.44 0.69 1.19 1.56
W14x455 4.48 0.25 0.44 0.69 1.19 1.56
W14x500 4.86 0.25 0.44 0.69 1.19 1.56
W14x550 5.25 0.25 0.44 0.69 1.19 1.56
W14x605 5.71 0.25 0.44 0.69 1.19 1.56
W14x665 6.21 0.25 0.44 0.69 1.19 1.56
W14x730 6.62 0.25 0.44 0.69 1.19 1.56
W14x808 7.28 0.25 0.44 0.69 1.19 1.56
W16x26 0.49 0.88 1.25 1.63 2.44 3.19
W16x31 0.58 0.75 1.06 1.38 2.06 2.69
W16x36 0.61 0.75 1.06 1.38 2.06 2.69
W16x40 0.67 0.69 1.06 1.38 2.06 2.63
W16x45 0.76 0.69 1.06 1.38 2.06 2.63
W16x50 0.83 0.56 1.06 1.38 2.06 2.50
W16x57 0.96 0.56 1.06 1.38 2.06 2.50
W16x67 0.92 0.56 1.06 1.38 2.06 2.50
W16x77 1.05 0.56 1.06 1.38 2.06 2.50
W16x89 1.20 0.56 1.06 1.38 2.06 2.50
W16x100 1.34 0.56 1.06 1.38 2.06 2.50
W18x35 0.59 0.75 1.06 1.38 2.06 2.69
W18x40 0.68 0.69 1.06 1.38 2.06 2.63
W18x46 0.78 0.69 1.06 1.38 2.06 2.63
W18x50 0.77 0.69 1.06 1.38 2.06 2.63
W18x55 0.84 0.56 1.06 1.38 2.06 2.50
W18x60 0.91 0.56 1.06 1.38 2.06 2.50
W18x65 0.98 0.56 1.06 1.38 2.06 2.50
W18x71 1.07 0.56 1.06 1.38 2.06 2.50
W18x76 0.95 0.56 1.06 1.38 2.06 2.50
W18x88 1.07 0.56 1.06 1.38 2.06 2.50
W18x97 1.20 0.56 1.06 1.38 2.06 2.50
W18x106 1.30 0.56 1.06 1.38 2.06 2.50
W18x119 1.46 0.56 1.06 1.38 2.06 2.50
W18x130 1.61 0.56 1.06 1.38 2.06 2.50
W18x143 1.77 0.56 1.06 1.38 2.06 2.50
W18x158 1.93 0.56 1.06 1.38 2.06 2.50
W18x175 2.12 0.56 1.06 1.38 2.06 2.50
W18x192 2.27 0.56 1.06 1.38 2.06 2.50
W18x211 2.47 0.56 1.06 1.38 2.06 2.50
W18x234 2.71 0.25 0.44 0.69 1.19 1.56
W18x258 2.95 0.25 0.44 0.69 1.19 1.56
W18x283 3.20 0.25 0.44 0.69 1.19 1.56
W18x311 3.47 0.25 0.44 0.69 1.19 1.56
W21x44 0.66 0.75 1.06 1.38 2.06 2.69
W21x50 0.75 0.69 1.06 1.38 2.06 2.63
W21x57 0.85 0.56 1.06 1.38 2.06 2.50
W21x62 0.84 0.56 1.06 1.38 2.06 2.50
W21x68 0.91 0.56 1.06 1.38 2.06 2.50
W21x83 1.10 0.56 1.06 1.38 2.06 2.50
W21x93 1.23 0.56 1.06 1.38 2.06 2.50
W21x101 1.11 0.56 1.06 1.38 2.06 2.50
W21x111 1.21 0.56 1.06 1.38 2.06 2.50
W21x122 1.33 0.56 1.06 1.38 2.06 2.50
W21x132 1.43 0.56 1.06 1.38 2.06 2.50
W21x147 1.59 0.56 1.06 1.38 2.06 2.50
W21x166 1.81 0.56 1.06 1.38 2.06 2.50
W21x182 1.97 0.56 1.06 1.38 2.06 2.50
W21x201 2.16 0.56 1.06 1.38 2.06 2.50
W24x55 0.74 0.69 1.06 1.38 2.06 2.63
W24x62 0.83 0.56 1.06 1.38 2.06 2.50
W24x68 0.82 0.69 1.06 1.38 2.06 2.63
W24x76 0.92 0.56 1.06 1.38 2.06 2.50
W24x84 1.01 0.56 1.06 1.38 2.06 2.50
W24x94 1.12 0.56 1.06 1.38 2.06 2.50
W24x103 1.25 0.56 1.06 1.38 2.06 2.50
W24x104 1.06 0.56 1.06 1.38 2.06 2.50
W24x117 1.19 0.56 1.06 1.38 2.06 2.50
W24x131 1.32 0.56 1.06 1.38 2.06 2.50
W24x146 1.46 0.56 1.06 1.38 2.06 2.50
W24x162 1.61 0.56 1.06 1.38 2.06 2.50
W24x176 1.77 0.56 1.06 1.38 2.06 2.50
W24x192 1.92 0.56 1.06 1.38 2.06 2.50
W24x207 2.05 0.56 1.06 1.38 2.06 2.50
W24x229 2.27 0.56 1.06 1.38 2.06 2.50
W24x250 2.45 0.56 1.06 1.38 2.06 2.50
W24x279 2.71 0.25 0.44 0.69 1.19 1.56
W24x306 2.94 0.25 0.44 0.69 1.19 1.56
W24x335 3.19 0.25 0.44 0.69 1.19 1.56
W24x370 3.46 0.25 0.44 0.69 1.19 1.56
W24x408 3.74 0.25 0.44 0.69 1.19 1.56
W24x492 4.40 0.25 0.44 0.69 1.19 1.56
W27x84 0.91 0.56 1.06 1.38 2.06 2.50
W27x94 1.01 0.56 1.06 1.38 2.06 2.50
W27x102 1.09 0.56 1.06 1.38 2.06 2.50
W27x114 1.21 0.56 1.06 1.38 2.06 2.50
W27x129 1.39 0.56 1.06 1.38 2.06 2.50
W27x146 1.33 0.56 1.06 1.38 2.06 2.50
W27x161 1.47 0.56 1.06 1.38 2.06 2.50
W27x178 1.61 0.56 1.06 1.38 2.06 2.50
W27x194 1.76 0.56 1.06 1.38 2.06 2.50
W27x217 1.97 0.56 1.06 1.38 2.06 2.50
W27x235 2.12 0.56 1.06 1.38 2.06 2.50
W27x258 2.30 0.56 1.06 1.38 2.06 2.50
W27x281 2.49 0.25 0.44 0.69 1.19 1.56
W27x307 2.72 0.25 0.44 0.69 1.19 1.56
W27x336 2.92 0.25 0.44 0.69 1.19 1.56
W27x368 3.17 0.25 0.44 0.69 1.19 1.56
W27x448 3.76 0.25 0.44 0.69 1.19 1.56
W27x539 4.45 0.25 0.44 0.69 1.19 1.56
W30x90 0.91 0.56 1.06 1.38 2.06 2.50
W30x99 0.99 0.56 1.06 1.38 2.06 2.50
W30x108 1.07 0.56 1.06 1.38 2.06 2.50
W30x116 1.15 0.56 1.06 1.38 2.06 2.50
W30x124 1.23 0.56 1.06 1.38 2.06 2.50
W30x132 1.30 0.56 1.06 1.38 2.06 2.50
W30x148 1.47 0.56 1.06 1.38 2.06 2.50
W30x173 1.44 0.56 1.06 1.38 2.06 2.50
W30x191 1.59 0.56 1.06 1.38 2.06 2.50
W30x211 1.74 0.56 1.06 1.38 2.06 2.50
W30x235 1.96 0.56 1.06 1.38 2.06 2.50
W30x261 2.16 0.56 1.06 1.38 2.06 2.50
W30x292 2.39 0.56 1.06 1.38 2.06 2.50
W30x326 2.65 0.25 0.44 0.69 1.19 1.56
W30x357 2.88 0.25 0.44 0.69 1.19 1.56
W30x391 3.13 0.25 0.44 0.69 1.19 1.56
W30x477 3.71 0.25 0.44 0.69 1.19 1.56
W33x118 1.07 0.56 1.06 1.38 2.06 2.50
W33x130 1.17 0.56 1.06 1.38 2.06 2.50
W33x141 1.27 0.56 1.06 1.38 2.06 2.50
W33x152 1.35 0.56 1.06 1.38 2.06 2.50
W33x169 1.52 0.56 1.06 1.38 2.06 2.50
W33x201 1.58 0.56 1.06 1.38 2.06 2.50
W33x221 1.73 0.56 1.06 1.38 2.06 2.50
W33x241 1.87 0.56 1.06 1.38 2.06 2.50
W33x263 2.04 0.56 1.06 1.38 2.06 2.50
W33x291 2.24 0.56 1.06 1.38 2.06 2.50
W33x318 2.43 0.56 1.06 1.38 2.06 2.50
W33x354 2.68 0.25 0.44 0.69 1.19 1.56
W33x387 2.91 0.25 0.44 0.69 1.19 1.56
W36x135 1.15 0.56 1.06 1.38 2.06 2.50
W36x150 1.27 0.56 1.06 1.38 2.06 2.50
W36x160 1.35 0.56 1.06 1.38 2.06 2.50
W36x170 1.43 0.56 1.06 1.38 2.06 2.50
W36x182 1.52 0.56 1.06 1.38 2.06 2.50
W36x194 1.62 0.56 1.06 1.38 2.06 2.50
W36x210 1.74 0.56 1.06 1.38 2.06 2.50
W36x230 1.69 0.56 1.06 1.38 2.06 2.50
W36x232 1.92 0.56 1.06 1.38 2.06 2.50
W36x245 1.79 0.56 1.06 1.38 2.06 2.50
W36x256 2.10 0.56 1.06 1.38 2.06 2.50
W36x260 1.90 0.56 1.06 1.38 2.06 2.50
W36x280 2.03 0.56 1.06 1.38 2.06 2.50
W36x300 2.17 0.56 1.06 1.38 2.06 2.50
W36x328 2.36 0.56 1.06 1.38 2.06 2.50
W36x359 2.57 0.25 0.44 0.69 1.19 1.56
W36x393 2.80 0.25 0.44 0.69 1.19 1.56
W36x439 3.10 0.25 0.44 0.69 1.19 1.56
W36x527 3.65 0.25 0.44 0.69 1.19 1.56
W36x650 4.41 0.25 0.44 0.69 1.19 1.56
W36x798 5.28 0.25 0.44 0.69 1.19 1.56
W36x848 5.57 0.25 0.44 0.69 1.19 1.56
W40x149 1.22 0.56 1.06 1.38 2.06 2.50
W40x167 1.36 0.56 1.06 1.38 2.06 2.50
W40x174 1.26 0.56 1.06 1.38 2.06 2.50
W40x183 1.48 0.56 1.06 1.38 2.06 2.50
W40x199 1.45 0.56 1.06 1.38 2.06 2.50
W40x211 1.70 0.56 1.06 1.38 2.06 2.50
W40x215 1.56 0.56 1.06 1.38 2.06 2.50
W40x235 1.87 0.56 1.06 1.38 2.06 2.50
W40x249 1.79 0.56 1.06 1.38 2.06 2.50
W40x264 2.10 0.56 1.06 1.38 2.06 2.50
W40x277 1.99 0.56 1.06 1.38 2.06 2.50
W40x278 2.20 0.56 1.06 1.38 2.06 2.50
W40x297 2.14 0.56 1.06 1.38 2.06 2.50
W40x321 2.26 0.56 1.06 1.38 2.06 2.50
W40x324 2.31 0.56 1.06 1.38 2.06 2.50
W40x327 2.56 0.25 0.44 0.69 1.19 1.56
W40x331 2.59 0.25 0.44 0.69 1.19 1.56
W40x362 2.57 0.25 0.44 0.69 1.19 1.56
W40x372 2.64 0.25 0.44 0.69 1.19 1.56
W40x392 3.02 0.25 0.44 0.69 1.19 1.56
W40x397 2.80 0.25 0.44 0.69 1.19 1.56
W40x431 3.01 0.25 0.44 0.69 1.19 1.56
W40x466 3.53 0.25 0.44 0.69 1.19 1.56
W40x503 3.49 0.25 0.44 0.69 1.19 1.56
W40x593 4.03 0.25 0.44 0.69 1.19 1.56
W44x230 1.58 0.56 1.06 1.38 2.06 2.50
W44x262 1.78 0.56 1.06 1.38 2.06 2.50
W44x290 1.97 0.56 1.06 1.38 2.06 2.50
W44x335 2.25 0.56 1.06 1.38 2.06 2.50
These column protection thicknesses have been determined for the convenience of users, in accordance with
the table and proprietary equation in Design Y725, as detailed in the UL Fire Resistance Directory.
for errors or omissions. If any discrepancy is found between these tables and the UL Design information,
*Minimum thickness shall not be less than 1/4-in., regardless of value in table.
Miscellaneous Steel Sizes - WWF Shapes (Based on UL Y725 & UL U703 Fire Safing Thickness)
Minimum Thickness, in., Required for Size and Rating Indicated
WWF14x92 1.13 0.485 0.727 0.969 1.454 1.939
WWF14x104 1.28 0.454 0.681 0.908 1.362 1.816
WWF14x118 1.45 0.42 0.629 0.839 1.259 1.679
WWF14x128 1.58 0.4 0.599 0.799 1.199 1.598
WWF14x142 1.76 0.371 0.557 0.743 1.114 1.458
WWF14x159 1.97 0.348 0.522 0.696 1.044 1.392
WWF14x177 2.19 0.33 0.495 0.66 0.989 1.319
WWF14x211 2.61 0.25 0.436 0.563 0.872 1.188
WWF16x105 1.12 0.485 0.727 0.969 1.454 1.939
WWF16x119 1.27 0.452 0.678 0.904 1.356 1.807
WWF16x135 1.45 0.42 0.629 0.839 1.259 1.679
WWF16x147 1.58 0.4 0.599 0.799 1.199 1.598
WWF16x163 1.76 0.371 0.557 0.743 1.114 1.458
WWF16x183 1.97 0.348 0.522 0.696 1.044 1.392
WWF16x203 2.19 0.33 0.495 0.66 0.989 1.319
WWF16x243 2.62 0.25 0.436 0.563 0.872 1.188
WWF16x298 3.23 0.25 0.36 0.479 0.719 0.959
WWF18x119 1.13 0.485 0.727 0.969 1.454 1.939
WWF18x134 1.27 0.452 0.678 0.904 1.356 1.807
WWF18x152 1.44 0.42 0.629 0.839 1.259 1.679
WWF18x166 1.58 0.4 0.599 0.799 1.199 1.598
WWF18x184 1.75 0.371 0.557 0.743 1.114 1.485
WWF18x207 1.97 0.348 0.522 0.696 1.044 1.392
WWF18x229 2.18 0.33 0.495 0.66 0.989 1.319
WWF18x275 2.62 0.25 0.436 0.563 0.872 1.188
WWF18x337 3.24 0.25 0.36 0.479 0.719 0.959
WWF20x132 1.13 0.485 0.727 0.969 1.454 1.939
WWF20x150 1.29 0.454 0.681 0.908 1.362 1.816
WWF20x170 1.46 0.42 0.629 0.839 1.259 1.679
WWF20x185 1.59 0.4 0.599 0.799 1.199 1.598
WWF20x205 1.77 0.371 0.557 0.743 1.114 1.458
WWF20x230 1.98 0.348 0.522 0.696 1.044 1.392
WWF20x256 2.20 0.33 0.495 0.66 0.989 1.319
WWF20x306 2.64 0.25 0.436 0.563 0.872 1.188
WWF20x377 3.27 0.25 0.36 0.479 0.719 0.959
WWF20x437 3.87 0.25 0.319 0.425 0.638 0.851
WWF22x188 1.46 0.42 0.629 0.839 1.259 1.679
WWF22x282 2.20 0.33 0.495 0.66 0.989 1.319
WWF22x338 2.64 0.25 0.436 0.563 0.872 1.188
WWF22x416 3.27 0.25 0.36 0.479 0.719 0.959
WWF22x484 3.87 0.25 0.319 0.425 0.638 0.851
WWF24x248 1.77 0.371 0.557 0.743 1.114 1.458
WWF24x309 2.21 0.33 0.495 0.66 0.989 1.319
WWF24x371 2.62 0.25 0.436 0.563 0.872 1.188
WWF24x456 3.27 0.25 0.36 0.479 0.719 0.959
WWF24x531 3.88 0.25 0.319 0.425 0.638 0.851
WWF26x269 1.77 0.371 0.557 0.743 1.114 1.458
WWF26x336 2.21 0.33 0.495 0.66 0.989 1.319
WWF26x402 2.64 0.25 0.436 0.563 0.872 1.188
WWF26x497 3.28 0.25 0.36 0.479 0.719 0.959
WWF26x580 3.89 0.25 0.319 0.425 0.638 0.851
WWF28x102 1.01 0.5 0.768 1.024 1.536 2.048
WWF28x117 1.16 0.478 0.717 0.956 1.433 1.911
WWF28x132 1.13 0.485 0.727 0.969 1.454 1.939
WWF28x144 1.23 0.46 0.69 0.92 1.381 1.841
WWF28x164 1.40 0.436 0.654 0.872 1.308 1.744
WWF31x108 0.99 0.52 0.78 1.04 1.56 2.08
WWF31x123 1.13 0.485 0.727 0.969 1.454 1.939
WWF31x150 1.20 0.476 0.7 0.933 1.4 1.866
WWF31x170 1.36 0.436 0.654 0.872 1.308 1.744
WWF31x202 1.44 0.42 0.629 0.839 1.259 1.679
WWF31x228 1.62 0.392 0.588 0.783 1.175 1.567
WWF35x113 0.97 0.5 0.792 1.056 1.585 2.113
WWF35x128 1.10 0.489 0.734 0.979 1.468 1.958
WWF35x156 1.17 0.473 0.71 0.946 1.42 1.893
WWF35x176 1.32 0.442 0.663 0.884 1.326 1.768
WWF35x208 1.40 0.429 0.643 0.857 1.286 1.715
WWF35x233 1.57 0.4 0.599 0.799 1.199 1.598
WWF35x279 1.78 0.371 0.557 0.743 1.114 1.485
WWF39x134 1.08 0.497 0.745 0.993 1.49 1.987
WWF39x150 1.20 0.467 0.7 0.933 1.4 1.866
WWF39x176 1.25 0.46 0.69 0.92 1.381 1.841
WWF39x197 1.40 0.429 0.643 0.857 1.286 1.715
WWF39x228 1.46 0.416 0.624 0.832 1.248 1.665
WWF39x253 1.62 0.392 0.588 0.783 1.175 1.567
WWF39x300 1.83 0.362 0.543 0.724 1.086 1.448
WWF43x157 1.19 0.469 0.703 0.938 1.406 1.875
WWF43x184 1.24 0.46 0.69 0.92 1.381 1.841
WWF43x204 1.37 0.436 0.654 0.872 1.308 1.744
WWF43x236 1.44 0.42 0.629 0.839 1.259 1.679
WWF43x260 1.59 0.4 0.599 0.799 1.199 1.598
WWF43x307 1.79 0.371 0.557 0.743 1.114 1.485
WWF47x176 1.25 0.46 0.69 0.92 1.381 1.841
WWF47x203 1.30 0.446 0.669 0.892 1.337 1.783
WWF47x224 1.43 0.421 0.632 0.843 1.264 1.686
WWF47x255 1.48 0.414 0.622 0.829 1.243 1.658
WWF47x281 1.64 0.392 0.588 0.783 1.175 1.567
WWF47x326 1.81 0.367 0.551 0.735 1.102 1.469
WWF55x240 1.40 0.429 0.643 0.857 1.286 1.715
WWF55x272 1.45 0.42 0.629 0.839 1.259 1.679
WWF55x316 1.62 0.392 0.588 0.783 1.175 1.567
WWF55x344 1.76 0.371 0.557 0.743 1.114 1.458
WWF55x402 2.06 0.339 0.508 0.677 1.016 1.355
WWF63x289 1.42 0.429 0.643 0.857 1.286 1.715
WWF63x333 1.58 0.4 0.599 0.799 1.199 1.598
WWF63x361 1.71 0.392 0.588 0.783 1.175 1.567
WWF63x388 1.84 0.362 0.543 0.724 1.086 1.448
WWF63x419 1.98 0.348 0.522 0.696 1.044 1.392
WWF71x344 1.57 0.4 0.599 0.799 1.199 1.598
WWF71x388 1.71 0.392 0.588 0.783 1.175 1.567
WWF71x415 1.83 0.362 0.543 0.724 1.086 1.448
WWF71x442 1.95 0.348 0.522 0.696 1.044 1.392
WWF71x470 2.07 0.339 0.508 0.677 1.016 1.355
WWF79x364 1.55 0.406 0.609 0.812 1.218 1.624
WWF79x408 1.68 0.392 0.588 0.783 1.175 1.567
WWF79x436 1.80 0.367 0.551 0.735 1.102 1.469
WWF79x490 2.02 0.339 0.508 0.677 1.016 1.355
Miscellaneous Steel Sizes - WT Sections (Based on UL Y725 & UL U703 Fire Safing Thickness)
WT2.6x6.5 0.55 0.67 1.004 1.339 2.009 2.678
WT2.6x8 0.54 0.674 1.011 1.348 2.022 2.696
WT2.6x9.5 0.64 0.632 0.947 1.263 1.895 2.526
WT3x4.5 0.34 0.779 1.169 1.558 2.337 3.116
WT3x6 0.44 0.723 1.084 1.446 2.168 2.891
WT3x8 0.58 0.656 0.985 1.313 1.969 2.625
WT3x7.5 0.43 0.733 1.1 1.467 2.2 2.934
WT3x10 0.56 0.665 0.998 1.33 1.995 2.661
WT3x12.5 0.69 0.612 0.918 1.224 1.837 2.449
WT4x5 0.33 0.785 1.178 1.563 2.356 3.141
WT4x6.5 0.42 0.733 1.1 1.467 2.2 2.934
WT4x7.5 0.48 0.702 1.054 1.405 2.107 2.81
WT4x9 0.50 0.702 1.054 1.405 2.107 2.81
WT4x10.5 0.57 0.661 0.991 1.313 1.982 2.625
WT4x12 0.59 0.652 0.978 1.304 1.956 2.609
WT4x14 0.68 0.616 0.924 1.232 1.848 2.464
WT4x15.5 0.66 0.624 0.936 1.247 1.871 2.495
WT4x17.5 0.74 0.598 0.896 1.195 1.793 2.39
WT4x20 0.84 0.5 0.841 1.122 1.682 2.43
WT4x24 1.00 0.515 0.772 1.029 1.544 2.058
WT4x29 1.18 0.473 0.71 0.946 1.42 1.893
WT4x33.5 1.34 0.438 0.657 0.876 1.314 1.752
WT5x6 0.35 0.779 1.169 1.558 2.337 3.116
WT5x7.5 0.43 0.733 1.1 1.467 2.2 2.934
WT5x8.5 0.48 0.702 1.054 1.405 2.107 2.81
WT5x9.5 0.53 0.679 1.018 1.357 2.036 2.715
WT5x11 0.52 0.683 1.025 1.367 2.05 2.733
WT5x13 0.61 0.648 0.972 1.296 1.944 2.592
WT5x15 0.69 0.612 0.918 1.224 1.837 2.449
WT5x16.5 0.66 0.624 0.936 1.247 1.871 2.495
WT5x19.5 0.77 0.587 0.881 1.174 1.761 2.348
WT5x22.5 0.88 0.551 0.827 1.103 1.654 2.206
WT5x24.5 0.83 0.564 0.846 1.125 1.688 2.25
WT5x27 0.92 0.5 0.805 1.073 1.61 2.147
WT5x30 1.01 0.5 0.768 1.024 1.536 2.048
WT5x34 1.13 0.482 0.724 0.965 1.447 1.929
WT5x38.5 1.27 0.452 0.678 0.904 1.356 1.807
WT5x44 1.43 0.421 0.632 0.843 1.264 1.686
WT5x50 1.61 0.392 0.588 0.783 1.175 1.567
WT5x56 1.77 0.371 0.557 0.743 1.114 1.485
WT6x7 0.36 0.767 1.151 1.534 2.301 3.068
WT6x8 0.41 0.739 1.108 1.478 2.216 2.955
WT6x9.5 0.48 0.702 1.054 1.405 2.107 2.81
WT6x11 0.55 0.67 1.004 1.339 2.009 2.678
WT6x13 0.53 0.679 1.018 1.357 2.036 2.715
WT6x15 0.61 0.648 0.972 1.296 1.944 2.592
WT6x17.5 0.70 0.609 0.913 1.217 1.826 2.434
WT6x20 0.74 0.598 0.896 1.195 1.793 2.39
WT6x22.5 0.82 0.567 0.851 1.134 1.701 2.268
WT6x25 0.91 0.5 0.809 1.079 1.619 2.158
WT6x26.5 0.84 0.5 0.841 1.122 1.682 2.43
WT6x29 0.92 0.5 0.805 1.073 1.61 2.147
WT6x32.5 0.92 0.5 0.805 1.073 1.61 2.147
WT6x36 1.01 0.5 0.768 1.024 1.536 2.048
WT6x39.5 1.10 0.489 0.734 0.979 1.468 1.958
WT6x43.5 1.21 0.464 0.697 0.929 1.393 1.858
WT6x48 1.32 0.442 0.663 0.884 1.326 1.768
WT6x53 1.45 0.42 0.629 0.839 1.259 1.679
WT6x60 1.62 0.392 0.588 0.783 1.175 1.567
WT6x68 1.81 0.371 0.557 0.743 1.114 1.485
WT6x76 2.01 0.339 0.508 0.677 1.016 1.355
WT6x85 2.21 0.33 0.495 0.66 0.989 1.319
WT6x95 2.44 0.31 0.465 0.621 0.931 1.241
WT6x105 2.66 0.25 0.436 0.563 0.872 1.188
WT6x115 2.87 0.25 0.41 0.546 0.819 1.092
WT6x126 3.10 0.25 0.383 0.511 0.767 1.022
WT6x139.5 3.38 0.25 0.36 0.479 0.719 0.959
WT6x152.5 3.64 0.25 0.337 0.449 0.674 0.899
WT6x168 3.93 0.25 0.319 0.425 0.638 0.851
WT7x11 0.48 0.702 1.054 1.405 2.107 2.81
WT7x13 0.56 0.665 0.998 1.33 1.995 2.661
WT7x15 0.56 0.665 0.998 1.33 1.995 2.661
WT7x17 0.63 0.636 0.953 1.271 1.907 2.542
WT7x19 0.70 0.598 0.896 1.195 1.793 2.39
WT7x21.5 0.74 0.598 0.896 1.195 1.793 2.39
WT7x24 0.83 0.564 0.846 1.125 1.688 2.25
WT7x26.5 0.90 0.5 0.814 1.085 1.628 2.17
WT7x30.5 0.92 0.5 0.805 1.073 1.61 2.147
WT7x34 1.02 0.5 0.768 1.024 1.536 2.048
WT7x37 1.10 0.489 0.734 0.979 1.468 1.958
WT7x41 1.21 0.464 0.697 0.929 1.393 1.858
WT7x45 1.07 0.497 0.745 0.993 1.49 1.987
WT7x49.5 1.17 0.473 0.71 0.946 1.42 1.893
WT7x54.5 1.29 0.454 0.681 0.908 1.362 1.816
WT7x60 1.40 0.429 0.643 0.857 1.286 1.715
WT7x66 1.53 0.406 0.609 0.812 1.218 1.624
WT7x72.5 1.62 0.392 0.588 0.783 1.175 1.567
WT7x79.5 1.76 0.371 0.557 0.743 1.114 1.485
WT7x88 1.93 0.348 0.522 0.696 1.044 1.392
WT7x96.5 2.11 0.33 0.495 0.66 0.989 1.319
WT7x105.5 2.28 0.31 0.465 0.621 0.931 1.241
WT7x116.5 2.49 0.25 0.436 0.563 0.872 1.188
WT7x128.5 2.72 0.25 0.41 0.546 0.819 1.092
WT7x141.5 2.96 0.25 0.383 0.511 0.767 1.022
WT7x155.5 3.21 0.25 0.367 0.489 0.733 0.978
WT7x171 3.48 0.25 0.343 0.457 0.686 0.915
WT7x185 3.71 0.25 0.323 0.431 0.646 0.862
WT7x199 3.95 0.25 0.319 0.425 0.638 0.851
WT7x213 4.18 0.25 0.304 0.405 0.607 0.809
WT7x227.5 4.42 0.25 0.29 0.386 0.579 0.772
WT7x250 4.76 0.25 0.277 0.369 0.553 0.738
WT7x275 5.14 0.25 0.277 0.369 0.553 0.738
WT7x302.5 5.53 0.25 0.25 0.323 0.485 0.646
WT7x332.5 5.95 0.25 0.25 0.301 0.451 0.601
WT7x365 6.39 0.25 0.25 0.301 0.451 0.601
WT7x404 6.86 0.25 0.25 0.265 0.375 0.5
WT8x13 0.50 0.702 1.054 1.405 2.107 2.81
WT8x15.5 0.59 0.652 0.978 1.304 1.956 2.609
WT8x18 0.62 0.644 0.966 1.287 1.931 2.575
WT8x20 0.68 0.616 0.924 1.232 1.848 2.464
WT8x22.5 0.76 0.587 0.881 1.174 1.761 2.348
WT8x25 0.84 0.5 0.841 1.122 1.682 2.43
WT8x28.5 0.95 0.5 0.792 1.056 1.585 2.113
WT8x33.5 0.93 0.5 0.809 1.079 1.619 2.158
WT8x38.5 1.06 0.499 0.749 0.998 1.498 1.997
WT8x44.5 1.21 0.464 0.697 0.929 1.393 1.858
WT8x50 1.35 0.436 0.654 0.872 1.308 1.744
WT9x17.5 0.60 0.648 0.972 1.296 1.944 2.592
WT9x20 0.68 0.616 0.924 1.232 1.848 2.464
WT9x23 0.78 0.58 0.87 1.161 1.741 2.321
WT9x25 0.77 0.587 0.881 1.174 1.761 2.348
WT9x27.5 0.84 0.5 0.841 1.122 1.682 2.43
WT9x30 0.90 0.5 0.814 1.085 1.628 2.17
WT9x32.5 0.99 0.52 0.78 1.04 1.56 2.08
WT9x35.5 1.07 0.499 0.749 0.998 1.498 1.997
WT9x38 0.96 0.5 0.792 1.056 1.585 2.113
WT9x43 1.08 0.497 0.745 0.993 1.49 1.987
WT9x48.5 1.21 0.464 0.697 0.929 1.393 1.858
WT9x53 1.31 0.452 0.678 0.904 1.356 1.807
WT9x59.5 1.46 0.416 0.624 0.832 1.248 1.665
WT9x65 1.59 0.4 0.599 0.799 1.199 1.598
WT9x71.5 1.74 0.373 0.559 0.746 1.118 1.491
WT9x79 1.90 0.362 0.543 0.724 1.086 1.448
WT9x87.5 2.08 0.393 0.508 0.677 1.016 1.355
WT9x96 2.22 0.33 0.495 0.66 0.989 1.319
WT9x105.5 2.41 0.31 0.465 0.621 0.931 1.241
WT9x117 2.64 0.25 0.436 0.563 0.872 1.188
WT9x129 2.87 0.25 0.41 0.546 0.819 1.092
WT9x141.5 3.10 0.25 0.383 0.511 0.767 1.022
WT9x155.5 3.36 0.25 0.36 0.479 0.719 0.959
WT10.5x22 0.67 0.62 0.93 1.24 1.859 2.479
WT10.5x25 0.66 0.624 0.936 1.247 1.871 2.495
WT10.5x28.5 0.75 0.591 0.886 1.181 1.772 2.362
WT10.5x27.5 0.75 0.591 0.886 1.181 1.772 2.362
WT10.5x31 0.84 0.5 0.841 1.122 1.682 2.43
WT10.5x34 0.92 0.537 0.805 1.073 1.61 2.147
WT10.5x36.5 0.98 0.52 0.78 1.04 1.56 2.08
WT10.5x41.5 1.11 0.487 0.731 0.974 1.461 1.948
WT10.5x46.5 1.23 0.464 0.697 0.929 1.393 1.858
WT10.5x50.5 1.12 0.458 0.727 0.969 1.454 1.939
WT10.5x55.5 1.22 0.464 0.697 0.929 1.393 1.858
WT10.5x61 1.33 0.44 0.66 0.88 1.32 1.76
WT10.5x66 1.44 0.42 0.629 0.839 1.259 1.679
WT10.5x73.5 1.59 0.4 0.599 0.799 1.199 1.598
WT10.5x83 1.79 0.371 0.557 0.743 1.114 1.458
WT10.5x91 1.94 0.348 0.522 0.696 1.044 1.392
WT10.5x100.5 2.12 0.33 0.495 0.66 0.989 1.319
WT12x27.5 0.75 0.591 0.886 1.181 1.772 2.362
WT12x31 0.84 0.5 0.841 1.122 1.682 2.43
WT12x34 0.83 0.564 0.846 1.125 1.688 2.25
WT12x38 0.92 0.5 0.805 1.073 1.61 2.147
WT12x42 1.01 0.5 0.768 1.024 1.536 2.048
WT12x47 1.12 0.458 0.727 0.969 1.454 1.939
WT12x51.5 1.23 0.464 0.697 0.929 1.393 1.858
WT12x52 1.07 0.497 0.745 0.993 1.49 1.987
WT12x58.5 1.19 0.473 0.71 0.946 1.42 1.893
WT12x65.5 1.33 0.44 0.66 0.88 1.32 1.76
WT12x73 1.47 0.416 0.624 0.832 1.248 1.665
WT12x81 1.61 0.392 0.588 0.783 1.175 1.567
WT12x88 1.75 0.371 0.557 0.743 1.114 1.485
WT12x96 1.90 0.362 0.543 0.724 1.086 1.448
WT12x103.5 2.03 0.393 0.508 0.677 1.016 1.355
WT12x114.5 2.23 0.33 0.495 0.66 0.989 1.319
WT12x125 2.40 0.31 0.465 0.621 0.931 1.241
WT12x139.5 2.65 0.25 0.436 0.563 0.872 1.188
WT12x167.5 3.11 0.25 0.388 0.518 0.777 1.036
WT12x204 3.63 0.25 0.337 0.449 0.674 0.899
WT12x246 4.25 0.25 0.29 0.386 0.579 0.772
WT13.5x42 0.92 0.5 0.805 1.073 1.61 2.147
WT13.5x47 1.02 0.5 0.768 1.024 1.536 2.048
WT13.5x51 1.10 0.489 0.734 0.979 1.468 1.958
WT13.5x57 1.22 0.464 0.697 0.929 1.393 1.858
WT13.5x64.5 1.38 0.438 0.657 0.876 1.314 1.752
WT13.5x73 1.34 0.438 0.657 0.876 1.314 1.752
WT13.5x80.5 1.47 0.414 0.622 0.829 1.243 1.658
WT13.5x89 1.61 0.392 0.588 0.783 1.175 1.567
WT13.5x97 1.75 0.371 0.557 0.743 1.114 1.485
WT13.5x108.5 1.94 0.348 0.522 0.696 1.044 1.392
WT13.5x117.5 2.09 0.33 0.495 0.66 0.989 1.319
WT13.5x129 2.27 0.33 0.495 0.66 0.989 1.319
WT13.5x153.5 2.66 0.25 0.436 0.563 0.872 1.188
WT13.5x184 3.12 0.25 0.383 0.511 0.767 1.022
WT13.5x224 3.65 0.25 0.337 0.449 0.674 0.899
WT13.5x269.5 4.32 0.25 0.29 0.386 0.579 0.772
WT15x45 0.91 0.5 0.809 1.079 1.619 2.158
WT15x49.5 0.99 0.517 0.776 1.035 1.552 2.069
WT15x54 1.08 0.497 0.745 0.993 1.49 1.987
WT15x58 1.16 0.478 0.717 0.956 1.433 1.911
WT15x62 1.23 0.46 0.69 0.92 1.381 1.841
WT15x66 1.30 0.452 0.678 0.904 1.356 1.807
WT15x74 1.46 0.416 0.624 0.832 1.248 1.665
WT15x86.5 1.45 0.42 0.629 0.839 1.259 1.679
WT15x95.5 1.59 0.4 0.599 0.799 1.199 1.598
WT15x105.5 1.75 0.371 0.557 0.743 1.114 1.485
WT15x117.5 1.93 0.348 0.522 0.696 1.044 1.392
WT15x130.5 2.13 0.33 0.495 0.66 0.989 1.319
WT15x146 2.36 0.31 0.465 0.621 0.931 1.241
WT15x163 2.61 0.25 0.436 0.563 0.872 1.188
WT15x195.5 3.07 0.25 0.383 0.511 0.767 1.022
WT15x238.5 3.62 0.25 0.337 0.449 0.674 0.899
WT16.5x59 1.07 0.497 0.745 0.993 1.49 1.987
WT16.5x65 1.18 0.473 0.71 0.946 1.42 1.893
WT16.5x70.5 1.27 0.452 0.678 0.904 1.356 1.807
WT16.5x76 1.36 0.438 0.657 0.876 1.314 1.752
WT16.5x84.5 1.51 0.416 0.624 0.832 1.248 1.665
WT16.5x100.5 1.56 0.4 0.599 0.799 1.199 1.598
WT16.5x110.5 1.70 0.392 0.588 0.783 1.175 1.567
WT16.5x120.5 1.85 0.362 0.543 0.724 1.086 1.448
WT16.5x131.5 2.01 0.339 0.508 0.677 1.016 1.355
WT16.5x145.5 2.21 0.33 0.495 0.66 0.989 1.319
WT16.5x159 2.39 0.31 0.465 0.621 0.931 1.241
WT16.5x177 2.64 0.25 0.436 0.563 0.872 1.188
WT18x67.5 1.15 0.478 0.717 0.956 1.433 1.911
WT18x75 1.27 0.452 0.678 0.904 1.356 1.807
WT18x80 1.35 0.436 0.654 0.872 1.308 1.744
WT18x85 1.43 0.414 0.622 0.829 1.243 1.658
WT18x91 1.52 0.406 0.609 0.812 1.218 1.624
WT18x97 1.62 0.392 0.588 0.783 1.175 1.567
WT18x105 1.74 0.373 0.559 0.746 1.118 1.491
WT18x116 1.91 0.362 0.543 0.724 1.086 1.448
WT18x128 2.10 0.33 0.495 0.66 0.989 1.319
WT18x115 1.69 0.392 0.588 0.783 1.175 1.567
WT18x122.5 1.80 0.373 0.559 0.746 1.118 1.491
WT18x130 1.90 0.362 0.543 0.724 1.086 1.448
WT18x140 2.04 0.393 0.508 0.677 1.016 1.355
WT18x150 2.17 0.33 0.495 0.66 0.989 1.319
WT18x164 2.37 0.31 0.465 0.621 0.931 1.241
WT18x179.5 2.58 0.25 0.436 0.563 0.872 1.188
WT18x196.5 2.80 0.25 0.41 0.546 0.819 1.092
WT18x219.5 3.09 0.25 0.383 0.511 0.767 1.022
WT18x263.5 3.63 0.25 0.337 0.449 0.674 0.899
WT18x325 4.36 0.25 0.29 0.386 0.579 0.772
WT18x399 5.19 0.25 0.29 0.386 0.579 0.772
WT18x424 5.39 0.25 0.25 0.323 0.485 0.646
WT20x74.5 1.23 0.464 0.697 0.929 1.393 1.858
WT20x83.5 1.37 0.414 0.622 0.829 1.243 1.658
WT20x91.5 1.49 0.414 0.622 0.829 1.243 1.658
WT20x105.5 1.70 0.392 0.588 0.783 1.175 1.567
WT20x117.5 1.89 0.362 0.543 0.724 1.086 1.448
WT20x132 2.11 0.33 0.495 0.66 0.989 1.319
WT20x139 2.20 0.33 0.495 0.66 0.989 1.319
WT20x165.5 2.58 0.25 0.436 0.563 0.872 1.188
WT20x196 3.00 0.25 0.383 0.511 0.767 1.022
WT20x233 3.44 0.25 0.36 0.479 0.719 0.959
WT20x87 2.28 0.33 0.495 0.66 0.989 1.319
WT20x99.5 2.56 0.25 0.436 0.563 0.872 1.188
WT20x107.5 2.58 0.25 0.436 0.563 0.872 1.188
WT20x124.5 2.53 0.25 0.436 0.563 0.872 1.188
WT20x138.5 2.59 0.25 0.436 0.563 0.872 1.188
WT20x148.5 3.00 0.25 0.383 0.511 0.767 1.022
WT20x160.5 2.75 0.25 0.41 0.546 0.819 1.092
WT20x186 2.97 0.25 0.383 0.511 0.767 1.022
WT20x215.5 3.44 0.25 0.36 0.479 0.719 0.959
WT20x251.5 3.41 0.25 0.36 0.479 0.719 0.959
WT20x296.5 3.94 0.25 0.319 0.425 0.638 0.851
WT22x115 1.56 0.4 0.599 0.799 1.199 1.598
WT22x131 1.76 0.371 0.557 0.743 1.114 1.485
WT22x145 1.95 0.348 0.522 0.696 1.044 1.392
WT22x167.5 2.22 0.316 0.474 0.632 0.949 1.265
Miscellaneous Steel Sizes - S Shapes (Based on UL Y725 & UL U703 Fire Safing Thickness)
S3x5.7 0.40 0.767 1.151 1.534 2.301 3.068
S3x7.5 0.50 0.723 1.084 1.446 2.168 2.891
S4x7.7 0.44 0.723 1.084 1.446 2.168 2.891
S4x9.5 0.53 0.679 1.018 1.357 2.036 2.715
S5x10 0.48 0.702 1.054 1.405 2.107 2.81
S6x12.5 0.52 0.683 1.025 1.367 2.05 2.733
S6x17.25 0.69 0.612 0.918 1.244 1.837 2.449
S8x18.4 0.61 0.648 0.972 1.296 1.944 2.592
S8x23 0.74 0.594 0.891 1.188 1.782 2.376
S10x25.4 0.69 0.612 0.918 1.224 1.837 2.449
S10x35 0.93 0.537 0.805 1.073 1.61 2.147
S12x31.8 0.76 0.587 0.881 1.174 1.761 2.348
S12x35 0.83 0.564 0.846 1.125 1.688 2.25
S12x40.8 0.95 0.537 0.805 1.073 1.61 2.147
S12x50 1.14 0.487 0.731 0.974 1.461 1.948
S15x42.9 0.86 0.5 0.841 1.122 1.682 2.243
S15x50 0.99 0.517 0.776 1.035 1.552 2.069
S18x54.7 0.95 0.54 0.809 1.079 1.619 2.158
S18x70 1.19 0.469 0.703 0.938 1.406 1.875
S20x66 1.05 0.5 0.753 1.003 1.505 2.007
S20x75 1.19 0.469 0.703 0.938 1.406 1.875
S20x86 1.30 0.446 0.669 0.892 1.337 1.783
S20x96 1.43 0.421 0.632 0.843 1.264 1.686
S24x80 1.09 0.492 0.738 0.984 1.476 1.967
S24x90 1.22 0.464 0.697 0.929 1.393 1.858
S24x100 1.35 0.436 0.654 0.872 1.308 1.744
S24x106 1.37 0.436 0.654 0.872 1.308 1.744
S24x121 1.54 0.406 0.609 0.812 1.218 1.624
Miscellaneous Steel Sizes - Rods (Based on UL Y725 & UL U703 Fire Safing Thickness)
1/4" 0.21 1.625 2.313 2.688 3.063 NFT
5/16" 0.27 1.625 2.313 2.688 3.063 NFT
3/8" 0.32 1.625 2.313 2.688 3.063 NFT
7/16" 0.37 0.770 1.150 1.530 2.300 3.070
1/2" 0.43 0.730 1.100 1.470 2.200 2.930
9/16" 0.48 0.690 1.030 1.380 2.060 2.750
5/8" 0.57 0.640 0.970 1.290 1.930 2.570
11/16" 0.59 0.640 0.970 1.290 1.930 2.570
3/4" 0.64 0.640 0.970 1.290 1.930 2.570
7/8" 0.75 0.598 0.896 1.195 1.793 2.390
1" 0.85 0.564 0.846 1.128 1.692 2.250
1-1/4" 1.06 0.500 0.809 1.079 1.619 2.158
1-5/16" 1.12 0.473 0.710 0.946 1.420 1.893
1-3/8" 1.17 0.473 0.710 0.946 1.420 1.893
1-7/16" 1.22 0.464 0.697 0.929 1.393 1.858
1-1/2" 1.28 0.464 0.697 0.929 1.393 1.858
1-9/16" 1.33 0.436 0.654 0.872 1.308 1.744
1-5/8" 1.38 0.436 0.654 0.872 1.308 1.744
1-11/16" 1.44 0.380 0.390 0.570 0.870 1.130
1-3/4" 1.49 0.414 0.622 0.892 1.243 1.658
1-7/8" 1.60 0.393 0.590 0.787 1.180 1.573
2" 1.70 0.392 0.588 0.783 1.175 1.567
2-1/4" 1.91 0.371 0.557 0.743 1.114 1.485
2-5/16" 1.97 0.348 0.522 0.696 1.044 1.392
2-3/8" 2.02 0.348 0.522 0.696 1.044 1.392
2-7/16" 2.07 0.348 0.522 0.696 1.044 1.392
2-1/2" 2.13 0.339 0.508 0.677 1.016 1.355
2-9/16" 2.18 0.339 0.508 0.677 1.016 1.355
2-5/8" 2.23 0.316 0.474 0.632 0.949 1.265
2-11/16" 2.29 0.31 0.465 0.621 0.931 1.241
2-3/4" 2.34 0.31 0.465 0.621 0.931 1.241
2-7/8" 2.45 0.294 0.441 0.588 0.882 1.176
3" 2.55 0.25 0.436 0.583 0.874 1.188
3-1/4" 2.76 0.25 0.41 0.546 0.819 1.092
3-5/16" 2.82 0.25 0.41 0.546 0.819 1.092
3-3/8" 2.87 0.25 0.41 0.546 0.819 1.092
3-7/16" 2.92 0.25 0.41 0.546 0.819 1.092
3-1/2" 2.98 0.25 0.383 0.511 0.767 1.022
3-9/16" 3.03 0.25 0.383 0.511 0.767 1.022
3-5/8" 3.08 0.25 0.383 0.511 0.767 1.022
3-11/16" 3.14 0.25 0.383 0.511 0.767 1.022
3-3/4" 3.19 0.25 0.383 0.511 0.767 1.022
Miscellaneous Steel Sizes - Rods (Based on UL Y725 & UL U703 Fire Safing Thickness)
3-7/8" 3.30 0.25 0.36 0.479 0.719 0.959
4" 3.40 0.25 0.36 0.479 0.719 0.959
4-1/4" 3.62 0.25 0.337 0.449 0.674 0.899
4-1/2" 3.83 0.25 0.319 0.425 0.638 0.851
Miscellaneous Steel Sizes - MC Shapes (Based on UL Y725 & UL U703 Fire Safing Thickness)
MC6x12 0.57 0.640 0.970 1.290 1.930 2.570
MC6x15.1 0.67 0.636 0.953 1.271 1.907 2.542
MC6x15.3 0.62 0.644 0.966 1.287 1.931 2.575
MC6x16.3 0.71 0.609 0.913 1.217 1.826 2.434
MC6x18 0.73 0.598 0.896 1.195 1.793 2.390
MC7x19.1 0.72 0.601 0.902 1.202 1.804 2.405
MC7x22.7 0.84 0.564 0.846 1.128 1.692 2.250
MC8x8.5 0.37 0.770 1.150 1.530 2.300 3.070
MC8x18.7 0.70 0.609 0.913 1.217 1.826 2.434
MC8x20 0.74 0.598 0.896 1.195 1.793 2.390
MC8x21.4 0.75 0.598 0.896 1.195 1.793 2.390
MC8x22.8 0.79 0.580 0.870 1.160 1.740 2.320
MC9x23.9 0.75 0.598 0.896 1.195 1.793 2.390
MC9x25.4 0.78 0.580 0.870 1.160 1.740 2.320
MC10x6.5 0.83 0.564 0.846 1.128 1.692 2.250
MC10x8.4 0.33 1.625 2.313 2.688 3.063 NFT
MC10x22 0.69 0.636 0.953 1.271 1.907 2.542
MC10x25 0.77 0.598 0.896 1.195 1.793 2.390
MC10x28.5 0.83 0.564 0.846 1.128 1.692 2.250
MC10x33.6 0.96 0.500 0.805 1.073 1.610 2.147
MC10x41.1 1.15 0.478 0.717 0.956 1.433 1.911
MC12x10.6 0.36 0.767 1.151 1.534 2.301 3.068
MC12x31 0.83 0.564 0.846 1.128 1.692 2.250
MC12x35 0.93 0.537 0.805 1.073 1.61 2.147
MC12x40 1.05 0.5 0.753 1.003 1.505 2.007
MC12x45 1.17 0.478 0.717 0.956 1.433 1.911
MC12x50 1.28 0.452 0.678 0.904 1.356 1.807
MC13x31.8 0.79 0.580 0.870 1.160 1.740 2.320
MC13x35 0.86 0.5 0.841 1.122 1.682 2.243
MC13x40 0.97 0.500 0.805 1.073 1.610 2.147
MC13x50 1.19 0.473 0.71 0.946 1.42 1.893
MC18x42.7 0.85 0.5 0.836 1.115 1.673 2.231
MC18x45.8 0.91 0.5 0.809 1.079 1.619 2.158
MC18x51.9 1.02 0.512 0.768 1.024 1.536 2.048
MC18x58 1.13 0.485 0.727 0.969 1.454 1.939
Miscellaneous Steel Sizes - M Shapes (Based on UL Y725 & UL U703 Fire Safing Thickness)
M4x6 0.273 1.625 2.313 2.688 3.063 NFT
M5x18.9 0.654 0.636 0.953 1.271 1.907 2.542
M6x3.7 0.193 1.625 2.313 2.688 3.063 NFT
M6x4.4 0.234 1.625 2.313 2.688 3.063 NFT
M8x6.2 0.251 1.625 2.313 2.688 3.063 NFT
M8x6.5 0.265 1.625 2.313 2.688 3.063 NFT
M10x7.5 0.249 1.625 2.313 2.688 3.063 NFT
M10x8.0 0.266 1.625 2.313 2.688 3.063 NFT
M10x9.0 0.299 1.625 2.313 2.688 3.063 NFT
M12x10 0.276 1.625 2.313 2.688 3.063 NFT
M12x10.8 0.303 1.625 2.313 2.688 3.063 NFT

Miscellaneous Steel Sizes - HP Shapes (Based on UL Y725 & UL U703 Fire Safing Thickness)
HP8x36 0.771 0.609 0.913 1.217 1.826 2.434
HP10x42 0.72 0.601 0.902 1.202 1.804 2.405
HP10x57 0.973 0.794 1.390 2.184 3.772 4.963
HP12x53 0.75 0.598 0.896 1.195 1.793 2.390
HP12x63 0.88 0.564 0.846 1.128 1.692 2.250
HP12x74 1.03 0.500 0.768 1.024 1.536 2.048
HP12x84 1.16 0.478 0.717 0.956 1.433 1.911
HP12x89 1.23 0.464 0.697 0.929 1.393 1.858
HP12x102 1.38 0.438 0.657 0.876 1.314 1.752
HP12x117 1.56 0.406 0.609 0.812 1.218 1.624
HP14x89 1.05 0.500 0.753 1.003 1.505 2.007
HP14x102 1.2 0.467 0.7 0.933 1.4 1.866
HP14x117 1.37 0.438 0.657 0.876 1.314 1.752
Miscellaneous Steel Sizes - Double Angles (Based on UL Y725 & UL U703 Fire Safing Thickness)
Dbl L3/4x3/4x1/4 0.35 0.780 1.170 1.560 2.340 3.120
Dbl L1x1x1/8 0.20 1.625 2.313 2.688 3.063 NFT
Dbl L1x1x3/16 0.29 1.625 2.313 2.688 3.063 NFT
Dbl L1x1x1/4 0.37 0.770 1.150 1.530 2.300 3.070
Dbl L1-1/4x1-1/4x1/8 0.20 1.625 2.313 2.688 3.063 NFT
Dbl L1-1/4x1-1/4x3/16 0.30 1.625 2.313 2.688 3.063 NFT
Dbl L1-1/4x1-1/4x1/4 0.38 0.770 1.150 1.530 2.300 3.070
Dbl L1-1/2x1-1/2x1/8 0.20 1.625 2.313 2.688 3.063 NFT
Dbl L1-1/2x1-1/2x3/16 0.30 1.625 2.313 2.688 3.063 NFT
Dbl L1-1/2x1-1/2x1/4 0.39 0.770 1.150 1.530 2.300 3.070
Dbl L1-3/4x1-3/4x1/8 0.21 1.625 2.313 2.688 3.063 NFT
Dbl L1-3/4x1-3/4x3/16 0.30 1.625 2.313 2.688 3.063 NFT
Dbl L1-3/4x1-3/4x1/4 0.39 0.770 1.150 1.530 2.300 3.070
Dbl L2x1-1/2x3/16 0.30 1.625 2.313 2.688 3.063 NFT
Dbl L2x1-1/2x1/4 0.39 0.770 1.150 1.530 2.300 3.070
Dbl L2x2x1/8 0.21 1.625 2.313 2.688 3.063 NFT
Dbl L2x2x3/16 0.31 1.625 2.313 2.688 3.063 NFT
Dbl L2x2x1/4 0.41 0.730 1.100 1.470 2.200 2.930
Dbl L2x2x5/16 0.50 0.700 1.050 1.400 2.090 2.790
Dbl L2x2x3/8 0.59 0.660 0.980 1.310 1.970 2.630
Dbl L2-1/2x2x3/16 0.31 1.625 2.313 2.688 3.063 NFT
Dbl L2-1/2x2x1/4 0.41 0.730 1.100 1.470 2.200 2.930
Dbl L2-1/2x2x5/16 0.51 0.690 1.030 1.380 2.060 2.750
Dbl L2-1/2x2x3/8 0.60 0.650 0.970 1.300 1.940 2.590
Dbl L2-1/2x2-1/2x3/16 0.31 1.625 2.313 2.688 3.063 NFT
Dbl L2-1/2x2-1/2x1/4 0.41 0.730 1.100 1.470 2.200 2.930
Dbl L2-1/2x2-1/2x5/16 0.50 0.700 1.050 1.400 2.090 2.790
Dbl L2-1/2x2-1/2x3/8 0.60 0.650 0.970 1.300 1.940 2.590
Dbl L2-1/2x2-1/2x1/2 0.78 0.580 0.870 1.160 1.740 2.320
Dbl L3x2x3/16 0.32 1.625 2.313 2.688 3.063 NFT
Dbl L3x2x1/4 0.41 0.730 1.100 1.470 2.200 2.930
Dbl L3x2x5/16 0.51 0.690 1.030 1.380 2.060 2.750
Dbl L3x2x3/8 0.60 0.650 0.970 1.300 1.940 2.590
Dbl L3x2x1/2 0.78 0.580 0.870 1.160 1.740 2.320
Dbl L3x2-1/2x3/16 0.32 1.625 2.313 2.688 3.063 NFT
Dbl L3x2-1/2x1/4 0.42 0.730 1.100 1.470 2.200 2.930
Dbl L3x2-1/2x5/16 0.51 0.690 1.030 1.380 2.060 2.750
Dbl L3x2-1/2x3/8 0.61 0.640 0.970 1.290 1.930 2.570
Dbl L3x2-1/2x1/2 0.79 0.580 0.870 1.160 1.740 2.320
Dbl L3x3x1/4 0.41 0.730 1.100 1.470 2.200 2.930
Dbl L3x3x5/16 0.51 0.690 1.030 1.380 2.060 2.750
Dbl L3x3x3/8 0.61 0.640 0.970 1.290 1.930 2.570
Dbl L3x3x7/16 0.70 0.609 0.913 1.217 1.826 2.434
Dbl L3x3x1/2 0.79 0.580 0.870 1.160 1.740 2.320
Dbl L3-1/2x2-1/2x1/4 0.42 0.730 1.100 1.470 2.200 2.930
Dbl L3-1/2x2-1/2x5/16 0.52 0.683 1.025 1.367 2.050 2.733
Dbl L3-1/2x2-1/2x3/8 0.61 0.640 0.970 1.290 1.930 2.570
Dbl L3-1/2x2-1/2x1/2 0.80 0.570 0.856 1.141 1.711 2.281
Dbl L3-1/2x3x1/4 0.42 0.730 1.100 1.470 2.200 2.930
Dbl L3-1/2x3x5/16 0.52 0.683 1.025 1.367 2.050 2.733
Dbl L3-1/2x3x3/8 0.62 0.644 0.966 1.287 1.931 2.575
Dbl L3-1/2x3x1/2 0.78 0.580 0.870 1.160 1.740 2.320
Dbl L3-1/2x3-1/2x1/4 0.42 0.730 1.100 1.470 2.200 2.930
Dbl L3-1/2x3-1/2x5/16 0.52 0.683 1.025 1.367 2.050 2.733
Dbl L3-1/2x3-1/2x3/8 0.62 0.644 0.966 1.287 1.931 2.575
Dbl L3-1/2x3-1/2x7/16 0.71 0.609 0.913 1.217 1.826 2.434
Dbl L3-1/2x3-1/2x1/2 0.80 0.570 0.856 1.141 1.711 2.281
Dbl L4x3x1/4 0.41 0.730 1.100 1.470 2.200 2.930
Dbl L4x3x5/16 0.51 0.690 1.030 1.380 2.060 2.750
Dbl L4x3x3/8 0.61 0.640 0.970 1.290 1.930 2.570
Dbl L4x3x7/16 0.70 0.609 0.913 1.217 1.826 2.434
Dbl L4x3x1/2 0.79 0.580 0.870 1.160 1.740 2.320
Dbl L4x3x5/8 0.97 0.794 1.390 2.184 3.772 4.963
Dbl L4x3–1/2x1/4 0.41 0.730 1.100 1.470 2.200 2.930
Dbl L4x3-1/2x5/16 0.51 0.690 1.030 1.380 2.060 2.750
Dbl L4x3-1/2x3/8 0.61 0.640 0.970 1.290 1.930 2.570
Dbl L4x3-1/2x1/2 0.79 0.580 0.870 1.160 1.740 2.320
Dbl L4x4x1/4 0.42 0.730 1.100 1.470 2.200 2.930
Dbl L4x4x5/16 0.52 0.683 1.025 1.367 2.050 2.733
Dbl L4x4x3/8 0.62 0.644 0.966 1.287 1.931 2.575
Dbl L4x4x7/16 0.71 0.609 0.913 1.217 1.826 2.434
Dbl L4x4x1/2 0.80 0.570 0.856 1.141 1.711 2.281
Dbl L4x4x5/8 0.99 0.517 0.776 1.035 1.552 2.069
Dbl L4x4x3/4 1.17 0.473 0.710 0.946 1.420 1.893
Dbl L5x3x1/4 0.42 0.730 1.100 1.470 2.200 2.930
Dbl L5x3x5/16 0.52 0.683 1.025 1.367 2.050 2.733
Dbl L5x3x3/8 0.62 0.644 0.966 1.287 1.931 2.575
Dbl L5x3x7/16 0.72 0.601 0.902 1.202 1.804 2.405
Dbl L5x3x1/2 0.81 0.570 0.856 1.141 1.711 2.281
Dbl L5x3-1/2x1/4 0.42 0.730 1.100 1.470 2.200 2.930
Dbl L5x3-1/2x5/16 0.52 0.683 1.025 1.367 2.050 2.733
Dbl L5x3-1/2x3/8 0.62 0.644 0.966 1.287 1.931 2.575
Dbl L5x3-1/2x1/2 0.81 0.570 0.856 1.141 1.711 2.281
Dbl L5x3-1/2x5/8 1.00 0.515 0.772 1.029 1.544 2.058
Dbl L5x3-1/2x3/4 1.18 0.473 0.710 0.946 1.420 1.893
Dbl L5x5x1/4 0.41 0.730 1.100 1.470 2.200 2.930
Dbl L5x5x5/16 0.53 0.679 1.018 1.357 2.036 2.715
Dbl L5x5x3/8 0.63 0.636 0.953 1.271 1.907 2.542
Dbl L5x5x7/16 0.73 0.598 0.896 1.195 1.793 2.390
Dbl L5x5x1/2 0.82 0.567 0.851 1.134 1.701 2.268
Dbl L5x5x5/8 1.02 0.500 0.809 1.079 1.619 2.158
Dbl L5x5x3/4 1.20 0.467 0.700 0.933 1.400 1.866
Dbl L5x5x7/8 1.38 0.429 0.643 0.857 1.286 1.715
Dbl L6x3-1/2x5/16 0.52 0.683 1.025 1.367 2.050 2.733
Dbl L6x3-1/2x3/8 0.62 0.644 0.966 1.287 1.931 2.575
Dbl L6x3-1/2x1/2 0.81 0.570 0.856 1.141 1.711 2.281
Dbl L6x3-1/2x5/8 0.99 0.517 0.776 1.035 1.552 2.069
Dbl L6x4x5/16 0.52 0.683 1.025 1.367 2.050 2.733
Dbl L6x4x3/8 0.62 0.644 0.966 1.287 1.931 2.575
Dbl L6x4x7/16 0.71 0.609 0.913 1.217 1.826 2.434
Dbl L6x4x1/2 0.81 0.570 0.856 1.141 1.711 2.281
Dbl L6x4x9/16 0.90 0.500 0.814 1.085 1.628 2.170
Dbl L6x4x5/8 1.00 0.515 0.772 1.029 1.544 2.058
Dbl L6x4x3/4 1.19 0.473 0.710 0.946 1.420 1.893
Dbl L6x4x7/8 1.37 0.436 0.654 0.872 1.308 1.744
Dbl L6x6x1/4 0.42 0.730 1.100 1.470 2.200 2.930
Dbl L6x6x5/16 0.53 0.679 1.018 1.357 2.036 2.715
Dbl L6x6x3/8 0.63 0.636 0.953 1.271 1.907 2.542
Dbl L6x6x7/16 0.73 0.598 0.896 1.195 1.793 2.390
Dbl L6x6x1/2 0.82 0.567 0.851 1.134 1.701 2.268
Dbl L6x6x9/16 0.92 0.500 0.809 1.079 1.619 2.158
Dbl L6x6x5/8 1.02 0.500 0.768 1.024 1.536 2.048
Dbl L6x6x3/4 1.21 0.467 0.700 0.933 1.400 1.866
Dbl L6x6x7/8 1.39 0.429 0.643 0.857 1.286 1.715
Dbl L6x6x1 1.58 0.395 0.592 0.790 1.184 1.579
Dbl L7x4x3/8 0.62 0.644 0.966 1.287 1.931 2.575
Dbl L7x4x7/16 0.73 0.598 0.896 1.195 1.793 2.390
Dbl L7x4x1/2 0.82 0.570 0.856 1.141 1.711 2.281
Dbl L7x4x5/8 1.01 0.515 0.772 1.029 1.544 2.058
Dbl L7x4x3/4 1.20 0.467 0.700 0.933 1.400 1.866
Dbl L8x4x7/16 0.73 0.598 0.896 1.195 1.793 2.390
Dbl L8x4x1/2 0.83 0.564 0.846 1.128 1.692 2.250
Dbl L8x4x9/16 0.93 0.500 0.805 1.073 1.610 2.147
Dbl L8x4x5/8 1.03 0.500 0.768 1.024 1.536 2.048
Dbl L8x4x3/4 1.21 0.467 0.700 0.933 1.400 1.866
Dbl L8x4x7/8 1.40 0.429 0.643 0.857 1.286 1.715
Dbl L8x4x1 1.58 0.395 0.592 0.790 1.184 1.579
Dbl L8x6x7/16 0.73 0.598 0.896 1.195 1.793 2.390
Dbl L8x6x1/2 0.84 0.564 0.846 1.128 1.692 2.250
Dbl L8x6x9/16 0.93 0.500 0.805 1.073 1.610 2.147
Dbl L8x6x5/8 1.03 0.500 0.768 1.024 1.536 2.048
Dbl L8x6x3/4 1.22 0.464 0.697 0.929 1.393 1.858
Dbl L8x6x7/8 1.41 0.429 0.643 0.857 1.286 1.715
Dbl L8x6x1 1.60 0.393 0.590 0.787 1.180 1.573
Dbl L8x8x1/2 0.84 0.564 0.846 1.128 1.692 2.250
Dbl L8x8x9/16 0.94 0.500 0.805 1.073 1.610 2.147
Dbl L8x8x5/8 1.04 0.512 0.768 1.024 1.536 2.048
Dbl L8x8x3/4 1.24 0.460 0.690 0.920 1.381 1.841
Dbl L8x8x7/8 1.43 0.421 0.632 0.843 1.264 1.686
Dbl L8x8x1 1.62 0.392 0.588 0.783 1.175 1.567
Dbl L8x8x1-1/8 1.80 0.371 0.557 0.743 1.114 1.485
Miscellaneous Steel Sizes - Angles (Based on UL Y725 & UL U703 Fire Safing Thickness)
Member W/D 1 hr 1.5 Hr 2 Hr 3 Hr 4 Hr
L3/4x3/4x1/4 0.35 0.780 1.170 1.560 2.340 3.120
L1x1x1/8 0.20 1.625 2.313 2.688 3.063 NFT
L1x1x3/16 0.29 1.625 2.313 2.688 3.063 NFT
L1x1x1/4 0.37 0.770 1.150 1.530 2.300 3.070
L1-1/4x1-1/4x1/8 0.20 1.625 2.313 2.688 3.063 NFT
L1-1/4x1-1/4x3/16 0.30 1.625 2.313 2.688 3.063 NFT
L1-1/4x1-1/4x1/4 0.38 0.770 1.150 1.530 2.300 3.070
L1-1/2x1-1/2x1/8 0.20 1.625 2.313 2.688 3.063 NFT
L1-1/2x1-1/2x3/16 0.30 1.625 2.313 2.688 3.063 NFT
L1-1/2x1-1/2x1/4 0.39 0.770 1.150 1.530 2.300 3.070
L1-3/4x1-3/4x1/8 0.21 1.625 2.313 2.688 3.063 NFT
L1-3/4x1-3/4x3/16 0.30 1.625 2.313 2.688 3.063 NFT
L1-3/4x1-3/4x1/4 0.39 0.770 1.150 1.530 2.300 3.070
L2x1-1/2x3/16 0.30 1.625 2.313 2.688 3.063 NFT
L2x1-1/2x1/4 0.39 0.770 1.150 1.530 2.300 3.070
L2x2x1/8 0.21 1.625 2.313 2.688 3.063 NFT
L2x2x3/16 0.31 1.625 2.313 2.688 3.063 NFT
L2x2x1/4 0.41 0.730 1.100 1.470 2.200 2.930
L2x2x5/16 0.50 0.700 1.050 1.400 2.090 2.790
L2x2x3/8 0.59 0.660 0.980 1.310 1.970 2.630
L2-1/2x2x3/16 0.31 1.625 2.313 2.688 3.063 NFT
L2-1/2x2x1/4 0.41 0.740 1.110 1.480 2.220 2.960
L2-1/2x2x5/16 0.51 0.690 1.030 1.380 2.060 2.750
L2-1/2x2x3/8 0.60 0.650 0.970 1.300 1.940 2.590
L2-1/2x2-1/2x1/4 0.41 0.730 1.100 1.470 2.200 2.930
L2-1/2x2-1/2x5/16 0.50 0.700 1.050 1.400 2.090 2.790
L2-1/2x2-1/2x3/8 0.60 0.650 0.970 1.300 1.940 2.590
L2-1/2x2-1/2x1/2 0.78 0.580 0.870 1.160 1.740 2.320
L3x2x3/16 0.32 1.625 2.313 2.688 3.063 NFT
L3x2x1/4 0.41 0.730 1.100 1.470 2.200 2.930
L3x2x5/16 0.51 0.690 1.030 1.380 2.060 2.750
L3x2x3/8 0.60 0.650 0.970 1.300 1.940 2.590
L3x2x1/2 0.78 0.580 0.870 1.160 1.740 2.320
L3x2-1/2x3/16 0.32 1.625 2.313 2.688 3.063 NFT
L3x2-1/2x1/4 0.42 0.730 1.100 1.470 2.200 2.930
L3x2-1/2x5/16 0.51 0.690 1.030 1.380 2.060 2.750
L3x2-1/2x3/8 0.61 0.640 0.970 1.290 1.930 2.570
L3x2-1/2x1/2 0.79 0.580 0.870 1.160 1.740 2.320
L3x3x3/16 0.31 1.625 2.313 2.688 3.063 NFT
L3x3x1/4 0.41 0.730 1.100 1.470 2.200 2.930
L3x3x5/16 0.51 0.690 1.030 1.380 2.060 2.750
L3x3x3/8 0.61 0.640 0.970 1.290 1.930 2.570
L3x3x7/16 0.70 0.609 0.913 1.217 1.826 2.434
L3x3x1/2 0.79 0.580 0.870 1.160 1.740 2.320
L3-1/2x2-1/2x1/4 0.42 0.730 1.100 1.470 2.200 2.930
L3-1/2x2-1/2x5/16 0.52 0.683 1.025 1.367 2.050 2.733
L3-1/2x2-1/2x3/8 0.61 0.640 0.970 1.290 1.930 2.570
L3-1/2x2-1/2x1/2 0.80 0.570 0.856 1.141 1.711 2.281
L3-1/2x3x1/4 0.42 0.730 1.100 1.470 2.200 2.930
L3-1/2x3x5/16 0.52 0.683 1.025 1.367 2.050 2.733
L3-1/2x3x3/8 0.62 0.644 0.966 1.287 1.931 2.575
L3-1/2x3x1/2 0.81 0.570 0.856 1.141 1.711 2.281
L3-1/2x3-1/2x1/4 0.42 0.730 1.100 1.470 2.200 2.930
L3-1/2x3-1/2x5/16 0.52 0.683 1.025 1.367 2.050 2.733
L3-1/2x3-1/2x3/8 0.62 0.644 0.966 1.287 1.931 2.575
L3-1/2x3-1/2x7/16 0.71 0.609 0.913 1.217 1.826 2.434
L3-1/2x3-1/2x1/2 0.80 0.570 0.856 1.141 1.711 2.281
L4x3x1/4 0.41 0.730 1.100 1.470 2.200 2.930
L4x3x5/16 0.51 0.690 1.030 1.380 2.060 2.750
L4x3x3/8 0.61 0.640 0.970 1.290 1.930 2.570
L4x3x7/16 0.70 0.609 0.913 1.217 1.826 2.434
L4x3x1/2 0.79 0.580 0.870 1.160 1.740 2.320
L4x3x5/8 0.97 0.794 1.390 2.184 3.772 4.963
L4x3–1/2x1/4 0.41 0.730 1.100 1.470 2.200 2.930
L4x3-1/2x5/16 0.51 0.690 1.030 1.380 2.060 2.750
L4x3-1/2x3/8 0.61 0.640 0.970 1.290 1.930 2.570
L4x3-1/2x1/2 0.79 0.580 0.870 1.160 1.740 2.320
L4x4x1/4 0.42 0.730 1.100 1.470 2.200 2.930
L4x4x5/16 0.52 0.683 1.025 1.367 2.050 2.733
L4x4x3/8 0.62 0.644 0.966 1.287 1.931 2.575
L4x4x7/16 0.71 0.609 0.913 1.217 1.826 2.434
L4x4x1/2 0.80 0.570 0.856 1.141 1.711 2.281
L4x4x5/8 0.99 0.517 0.776 1.035 1.552 2.069
L4x4x3/4 1.17 0.473 0.710 0.946 1.420 1.893
L5x3x1/4 0.42 0.730 1.100 1.470 2.200 2.930
L5x3x5/16 0.52 0.683 1.025 1.367 2.050 2.733
L5x3x3/8 0.62 0.644 0.966 1.287 1.931 2.575
L5x3x7/16 0.72 0.601 0.902 1.202 1.804 2.405
L5x3x1/2 0.81 0.570 0.856 1.141 1.711 2.281
L5x3-1/2x1/4 0.42 0.730 1.100 1.470 2.200 2.930
L5x3-1/2x5/16 0.52 0.683 1.025 1.367 2.050 2.733
L5x3-1/2x3/8 0.62 0.644 0.966 1.287 1.931 2.575
L5x3-1/2x1/2 0.81 0.570 0.856 1.141 1.711 2.281
L5x3-1/2x5/8 1.00 0.515 0.772 1.029 1.544 2.058
L5x3-1/2x3/4 1.18 0.473 0.710 0.946 1.420 1.893
L5x5x1/4 0.41 0.730 1.100 1.470 2.200 2.930
L5x5x5/16 0.53 0.679 1.018 1.357 2.036 2.715
L5x5x3/8 0.63 0.636 0.953 1.271 1.907 2.542
L5x5x7/16 0.73 0.598 0.896 1.195 1.793 2.390
L5x5x1/2 0.82 0.567 0.851 1.134 1.701 2.268
L5x5x5/8 1.02 0.500 0.809 1.079 1.619 2.158
L5x5x3/4 1.20 0.467 0.700 0.933 1.400 1.866
L5x5x7/8 1.38 0.429 0.643 0.857 1.286 1.715
L6x3-1/2x5/16 0.52 0.683 1.025 1.367 2.050 2.733
L6x3-1/2x3/8 0.62 0.644 0.966 1.287 1.931 2.575
L6x3-1/2x1/2 0.81 0.570 0.856 1.141 1.711 2.281
L6x3-1/2x5/8 0.99 0.517 0.776 1.035 1.552 2.069
L6x4x5/16 0.52 0.683 1.025 1.367 2.050 2.733
L6x4x3/8 0.62 0.644 0.966 1.287 1.931 2.575
L6x4x7/16 0.71 0.609 0.913 1.217 1.826 2.434
L6x4x1/2 0.81 0.570 0.856 1.141 1.711 2.281
L6x4x9/16 0.90 0.500 0.814 1.085 1.628 2.170
L6x4x5/8 1.00 0.515 0.772 1.029 1.544 2.058
L6x4x3/4 1.19 0.473 0.710 0.946 1.420 1.893
L6x4x7/8 1.37 0.436 0.654 0.872 1.308 1.744
L6x6x1/4 0.42 0.730 1.100 1.470 2.200 2.930
L6x6x5/16 0.53 0.679 1.018 1.357 2.036 2.715
L6x6x3/8 0.63 0.636 0.953 1.271 1.907 2.542
L6x6x7/16 0.73 0.598 0.896 1.195 1.793 2.390
L6x6x1/2 0.82 0.567 0.851 1.134 1.701 2.268
L6x6x9/16 0.92 0.500 0.809 1.079 1.619 2.158
L6x6x5/8 1.02 0.500 0.768 1.024 1.536 2.048
L6x6x3/4 1.21 0.467 0.700 0.933 1.400 1.866
L6x6x7/8 1.39 0.429 0.643 0.857 1.286 1.715
L6x6x1 1.58 0.395 0.592 0.790 1.184 1.579
L7x4x3/8 0.62 0.644 0.966 1.287 1.931 2.575
L7x4x7/16 0.73 0.598 0.896 1.195 1.793 2.390
L7x4x1/2 0.82 0.570 0.856 1.141 1.711 2.281
L7x4x5/8 1.01 0.515 0.772 1.029 1.544 2.058
L7x4x3/4 1.20 0.467 0.700 0.933 1.400 1.866
L8x4x7/16 0.73 0.598 0.896 1.195 1.793 2.390
L8x4x1/2 0.83 0.564 0.846 1.128 1.692 2.250
L8x4x9/16 0.93 0.500 0.805 1.073 1.610 2.147
L8x4x5/8 1.03 0.500 0.768 1.024 1.536 2.048
L8x4x3/4 1.21 0.467 0.700 0.933 1.400 1.866
L8x4x7/8 1.40 0.429 0.643 0.857 1.286 1.715
L8x4x1 1.58 0.395 0.592 0.790 1.184 1.579
L8x6x7/16 0.73 0.598 0.896 1.195 1.793 2.390
L8x6x1/2 0.84 0.564 0.846 1.128 1.692 2.250
L8x6x9/16 0.93 0.500 0.805 1.073 1.610 2.147
L8x6x5/8 1.03 0.500 0.768 1.024 1.536 2.048
L8x6x3/4 1.22 0.464 0.697 0.929 1.393 1.858
L8x6x7/8 1.41 0.429 0.643 0.857 1.286 1.715
L8x6x1 1.60 0.393 0.590 0.787 1.180 1.573
L8x8x1/2 0.84 0.564 0.846 1.128 1.692 2.250
L8x8x9/16 0.94 0.500 0.805 1.073 1.610 2.147
L8x8x5/8 1.04 0.512 0.768 1.024 1.536 2.048
L8x8x3/4 1.24 0.460 0.690 0.920 1.381 1.841
L8x8x7/8 1.43 0.421 0.632 0.843 1.264 1.686
L8x8x1 1.62 0.392 0.588 0.783 1.175 1.567
L8x8x1-1/8 1.80 0.371 0.557 0.743 1.114 1.485
Miscellaneous Steel Sizes - C Channels (Based on UL Y725 & UL U703 Fire Safing Thickness)
C3x4.1 0.37 0.779 1.169 1.558 2.337 3.116
C3x5 0.44 0.723 1.084 1.446 2.168 2.891
C3x6 0.51 0.688 1.032 1.376 2.064 2.752
C4x5.4 0.40 0.779 1.169 1.558 2.337 3.116
C4x6.25 0.45 0.723 1.084 1.446 2.168 2.891
C4x7.25 0.51 0.688 1.032 1.376 2.064 2.752
C5x6.7 0.41 0.739 1.108 1.478 2.216 2.955
C5x9 0.54 0.674 1.011 1.348 2.022 2.696
C6x8.2 0.43 0.733 1.1 1.467 2.2 2.934
C6x10.5 0.54 0.674 1.011 1.348 2.022 2.696
C6x13 0.66 0.624 0.936 1.247 1.871 2.495
C7x11.5 0.46 0.723 1.084 1.446 2.168 2.891
C7x12.25 0.56 0.665 0.998 1.33 1.995 2.661
C7x14.75 0.68 0.616 0.924 1.232 1.848 2.464
C8x11.5 0.48 0.702 1.054 1.405 2.107 2.81
C8x13.75 0.56 0.665 0.998 1.33 1.995 2.661
C8x18.75 0.75 0.591 0.886 1.181 1.772 2.362
C9x13.4 0.50 0.698 1.046 1.395 2.093 2.79
C9x15 0.56 0.665 0.998 1.33 1.995 2.661
C9x20 0.73 0.598 0.896 1.195 1.793 2.39
C10x15.3 0.52 0.683 1.025 1.367 2.05 2.733
C10x20 0.67 0.62 0.93 1.24 1.859 2.479
C10x25 0.82 0.57 0.856 1.141 1.711 2.281
C10x30 0.97 0.537 0.805 1.073 1.61 2.147
C12x20.7 0.60 0.648 0.972 1.296 1.944 2.592
C12x25 0.71 0.609 0.913 1.217 1.826 2.434
C12x30 0.85 0.5 0.836 1.115 1.673 2.231
C15x33.9 0.80 0.584 0.875 1.167 1.751 2.335
C15x40 0.94 0.5 0.805 1.073 1.61 2.147
C15x50 1.15 0.478 0.717 0.956 1.433 1.911

SW Estimating Manual

Uploaded by

Copyright:

Available Formats

SW Estimating Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SW Estimating Manual

Uploaded by

Copyright:

Available Formats

What products are covered in this manual?

What products are covered in this manual?

What information is provided for estimating fireproofing?

What information is provided for estimating fireproofing?

ESTIMATING MANUAL

SOUTHWEST FIREPROOFING PRODUCTS

ESTIMATING MANUAL AND PRODUCT SELECTOR FOR

DOCUMENT No.: 100919-SW-A

SECTION 1: Southwest Fireproofing Product Selector

APPENDIX A: Simplified Design Flow Chart

Effective October, 2019

SECTION 1: Southwest Fireproofing Product Selector

Gypsum Gypsum Gypsum Portland Portland Portland

Density (Class) lb/ft3 (pcf) 15 15-22 15 22 22 35-40

>430 (15 pcf)

Extended Set Material X

Can be injected with

Effective October, 2019

SECTION 2: Introduction, Guidelines & Scheduling

Be sure you have these tools and information:

1. Project specifications and all addendum

COORDINATION AND PROJECT SUPERVISION

Effective October, 2019

SECTION 3: Estimating Columns

ESTIMATING WIDE FLANGE COLUMNS

Sample procedure (on column worksheet)

1. # column x I'm. ft. per column = Total lin. ft. of columns

ESTIMATING PIPE AND TUBE COLUMNS

1. Separate columns on a specific floor by size, from largest too smallest.

(d + 2 th) 2 x th x lineal footage = bd. ft.

((2L + 2H) x th) + (4 x th 2) x Total lin. footage = bd. ft.

L = length in inches d = outside dia. of pipe in inches

Effective October, 2019

SECTION 4: Estimating Beams, Decks and Joists

Cellular Decks: (flat)

1. Multiply length x width = sq. ft. of flat area

Effective October, 2019

1. Multiply length x width = sq. ft. fluted decks

ESTIMATING STEEL BAR, JOISTS AND TRUSSES

1. Separate joists by size (depth) and required fireproofing thickness.

(d x2 +w) x ft. x th = bd. ft.

Where: d = depth in inches

CONVERSION OF BRD. FT. TO TOTAL BAGS

Effective October, 2019

110.000 bd. ft. =. 2,895 bags of Type 5

INTENTIONALLY LEFT BLANK

Effective October, 2019

SECTION 5: Type DK3 Adhesive/Spattercoat

1. Determine the total area in sq. ft. requiring Type DK adhesive.

INTENTIONALLY LEFT BLANK

Effective October, 2019

SECTION 6: Estimate Build-Up

TOTAL MATERIAL COSTS

FINAL PROJECT ESTIMATE

Effective October, 2019

Effective October, 2019

1-1/2”, 2”or 3”Fluted

2” NW/LW Concrete Min. 2-1/2” NW/LW

Quick Links ULC F817 Substitutions

ULC Z805 ULC Z807 (CHS)