Series Description: Universal Product Line: Steel Externals - Jacketed Pumps
Series Description: Universal Product Line: Steel Externals - Jacketed Pumps
Series Description: Universal Product Line: Steel Externals - Jacketed Pumps
RELATED PRODUCTS
Steel Externals, Jacketed Pumps (API 676 Compliant):
Catalog Section 1305
Stainless Steel, Jacketed Pumps (API 676 Compliant):
Catalog Section 1705 KK4223AA
R4323AA
OPERATING RANGE
to maintenance. 5
4
3
2
Bracket
D
L S 4 2 2 3 A A
Size: Shaft Seal: Basic Series Universal Product Line Casing
H LS 4 = Mechanical Seal Configuration with API 682 Bracket
HL Q Material of Construction:
K QS 3 = Steel Externals
KK N Jacketing:
LQ R 2 = Jacketed Bracket & Casing
LL RS 3 = Foot Mount Casing w/ Jacketed Bracket & Casing
* Only the N through RS sizes are foot mount with jacketed bracket (3).
SPECIFICATIONS
② Maximum
③ ④ Maximum ① Maximum Recommended
Standard Nominal Pump Rating Hydrostatic Discharge Temperature for Approximate Shipping
Port Size (100 SSU & below) Pressure Pressure Standard Pump Weight with Valve
Model
Number Inches GPM m3/h RPM PSIG BAR PSIG BAR °F °C Lbs. Kg.
H4223AA 1½ 15 3.4 1750 400 28 200 14 350 180 170 77
HL4223AA 1½ 30 6.8 1750 400 28 200 14 350 180 170 77
K4223AA 2 80 18 780 400 28 200 14 350 180 215 98
KK4223AA 2 100 23 780 400 28 200 14 350 180 215 98
LQ4223AA 2½ 135 31 640 400 28 200 14 350 180 345 156
LL4223AA 3 140 32 520 400 28 200 14 350 180 350 159
LS4223AA 3 200 45 640 400 28 200 14 350 180 360 163
Q4223AA 4 300 68 520 400 28 200 14 350 180 640 290
QS4223AA 6 500 114 520 400 28 200 14 350 180 700 318
N4223AA 6 600 136 350 400 28 200 14 350 180 1,015 460
R4323AA 8 1,100 250 280 400 28 200 14 350 180 2,050 930
RS4323AA 10 1,600 364 280 400 28 125 9 350 180 2,450 1,111
NOTE: H-N size pumps are standard with a jacketed bracket and plain head.
R size pumps are standard with a jacketed bracket and jacketed head.
RS size pumps are standard with a jacketed bracket, jacketed casing and jacketed head.
① For maximum recommended discharge pressures at different ② Higher temperatures can be handled with special construction
viscosities, see performance curves, which can be electronically and/or extra clearances, consult factory. Temperature based
generated with the Viking Pump Curve Generator, located on on Viton™ seal as standard. Lower temperature limits may be
www.vikingpump.com. If suction pressure exceeds 50 PSIG, consult required when using other seal elastomers
factory. Higher pressures possible with factory approval based on ③ Ports are suitable for Class 150 steel or stainless steel companion
application details. flanges or flanged fittings.
④ Maximum hydrostatic pressure for standard pump construction.
Rating is dependent on seal, gaskets and ports.
Standard Casings
Ports Rotatable
Size (Inches) Data Non-Jacketed Casing Options Fully-Jacketed Casing Options
H 1.5”①Ⓡ Fully Rotatable 1.5”②Ⓡ 2”①Ⓡ 2”②Ⓡ 2”②Ⓡ
HL 1.5”①Ⓡ Fully Rotatable 1.5”②Ⓡ 2”①Ⓡ 2”②Ⓡ 2”②Ⓡ
K 2”①Ⓡ Fully Rotatable 2”②Ⓡ 2.5”①Ⓡ 2.5”②Ⓡ 3”①Ⓡ 3”②Ⓡ 4”①Ⓡ 4”②Ⓡ 3”①Ⓡ, 4”①Ⓡ, 3”②Ⓡ, 3”②Ⓞ
KK 2”①Ⓡ Fully Rotatable 2”②Ⓡ 2.5”①Ⓡ 2.5”②Ⓡ 3”①Ⓡ 3”②Ⓡ 4”①Ⓡ 4”②Ⓡ 3”①Ⓡ, 4”①Ⓡ, 3”②Ⓡ, 3”②Ⓞ
Ports cannot
LQ 2.5”①Ⓡ 2.5”②Ⓡ 3”②Ⓡ 4”①Ⓡ 4”②Ⓡ 6”①Ⓡ 3”①Ⓡ, 3”②Ⓡ, 4”②Ⓡ
face down
Ports cannot
LL 3”①Ⓡ 3”②Ⓡ 4”①Ⓡ 4”②Ⓡ
face down
LS 3”①Ⓡ Fully Rotatable 3”②Ⓡ 4”①Ⓡ 4”②Ⓡ 4”①Ⓡ, 6”①Ⓡ, 4”②Ⓡ
Q 4”①Ⓡ Fully Rotatable 4”②Ⓡ 5”①Ⓡ 5”②Ⓡ 6”①Ⓡ* 6”②Ⓡ* 6”①Ⓞ 6”②Ⓞ 4”①Ⓡ, 4”②Ⓡ
Rotatable with
QS 6”①Ⓞ 6”①Ⓡ 6”②Ⓞ 6”①Ⓡ, 6”②Ⓞ
special casing
N 6”①Ⓞ Not Rotatable 6”①Ⓝ, 8”②Ⓞ
R 8”①Ⓞ Not Rotatable 8”①Ⓞ
RS 10”①Ⓞ Not Rotatable
① Ports suitable for Class 150 ANSI steel or stainless steel Ⓝ Non-Rotatable Ports at 90 degree angle, contact factory
companion flanges or flanged fittings. for available orientation (right hand or left hand)
② Ports suitable for Class 300 ANSI steel or stainless steel Ⓞ Opposite Ports
companion flanges or flanged fittings. Ⓡ 90° port arranged for Right Hand inlet (viewed from shaft end)
AA
BB
HH Y
EE
HH
GG
MODEL Q
S
FF A
DD B R
T BB
M AA
K C
B
CC X
CC X
U D
V
P E O
J
F E
H L
G
Model
A B C D E F G H J K L M N O P
Number
(in)
H4223AA in 4.00 4.75 6.00 4.25 5.00 11.00 8.63 0.47 0.99 3.83 3.83 5.95 0.94 1.61
③1.5
HL4223AA mm 102 121 152 108 127 279 219 12 25 97 97 151 24 41
K4223AA in 5.25 8.00 6.50 4.38 3.50 11.00 7.74 0.53 1.42 3.00 4.00 6.02 0.94 2.00
③2
KK4223AA mm 133 203 165 111 89 279 197 14 36 76 102 153 24 51
in 7.19 10.25 7.00 5.00 5.00 12.50 8.39 0.53 1.42 3.38 4.34 7.01 0.81 1.38
LQ4223AA ③ 2.5
mm 183 260 178 127 127 318 213 14 36 86 110 178 21 35
in 7.19 10.25 7.00 5.00 5.00 12.50 8.39 0.53 1.42 3.38 4.34 7.01 0.81 1.38
LL4223AA ③ 3
mm 183 260 178 127 127 318 213 14 36 86 110 178 21 35
in 7.19 10.25 7.00 5.00 5.00 12.50 8.39 0.53 1.42 4.55 4.34 8.18 0.81 1.38
LS4223AA ②3
mm 183 260 178 127 127 318 213 14 36 116 110 208 21 35
in 8.25 14.00 9.50 5.25 6.25 13.25 10.52 0.69 3.58 5.35 5.50 8.63 1.08 2.03
Q4223AA ③ 4
mm 210 356 241 133 159 337 267 18 91 136 140 219 27 52
Model U V ② AA ③ BB
R S T X Y CC DD EE FF GG HH
Number (in) (in) (in) (in)
H4223AA in 5.95 16.91 1.59 2.38 3.63 0.94 2.41 8.38 2.30 — 2.38
0.75 .19 x .09 3/4" ½"
HL4223AA mm 151 430 40 .25 x .12 92 24 61 213 58 — 61
K4223AA in 6.02 18.58 2.29 2.63 3.62 1.75 3.25 8.43 2.92 — 2.41
1.12 .25 x .12 3/4" 1¼"
KK4223AA mm 153 472 58 .25 x .12 92 45 83 214 74 — 61
in 7.01 22.98 2.25 3.00 4.25 3.00 3.81 8.43 2.93 — 2.75
LQ4223AA 1.12 .38 x .19 1" 1"
mm 178 584 57 .50 x .25 108 76 97 214 74 — 70
in 7.01 22.98 2.25 3.00 4.25 3.00 4.31 8.43 2.93 — 2.75
LL4223AA 1.12 1.13 1" 1"
mm 178 584 57 76 108 76 110 214 74 — 70
in 8.18 24.15 3.55 3.00 4.25 3.00 4.50 8.43 4.03 — 2.75
LS4223AA 1.44 1.44 1" 1"
mm 208 613 90 76 108 76 114 214 102 — 70
in 8.63 25.06 4.50 3.75 5.25 — 4.57 12.09 5.35 3.75 3.63
Q4223AA 1.94 1.94 1" 1¼"
mm 219 637 114 95 133 — 116 307 136 95 92
① Ports are suitable for Class 150 ANSI steel or stainless steel ② Ports are suitable for use with Class 125 ANSI cast iron.
companion flanges or flanged fittings. ③ BB dimension for Q4223A is 1”.
These dimensions are average and not for construction purposes. Certified prints on request.
DIMENSIONS – QS SIZE
9.13 12.19
232 310
1" NPT
3.63
92
5.13
130
3.63
92
25.55
649 9.00
5.40
6.06 229
137 9.00
154
4.50 229 14.00 9.13
114 5.50
356 232
3.58 140 1" NPT
3.00 3.75
91
76 95
R3.75
95
1.9375 9.50
49.2 1" NPT 241 3.75
.50 X .25 95
[12.70 X 6.35] 2.03
5.25 1.08
52 .69
6.25 133 27
[17.5] 5.25
159
5.85 133 1.38
148 35
10.52 13.25
267 337
* Ports for steam or hot oil jacketing are inch standard NPT threads. Metric (mm) equivalents are for information only,
and do not indicate a metric thread size.
These dimensions are average and not for construction purposes. Certified prints on request.
AA
CC
EE
CC
S B B
T R N Y
A AA
K C
P
U
GG D
V
H
J E O
X BB
Z F E
DD G
M
FF
Model A
B C D E F G H J K M N O P R S
Number (in)
① in 9.75 17.25 9.50 5.00 6.25 8.69 1.62 0.69 4.50 12.00 4.50 1.00 3.00 26.00 36.50
N4323AA
6 mm 248 438 241 127 159 221 41 18 114 305 114 25 76 660 927
① in 14.25 24.50 13.25 6.75 7.00 10.56 2.31 0.78 6.00 16.00 5.62 1.00 4.50 28.75 41.00
R4323AA
8 mm 362 622 337 171 178 268 59 20 152 406 143 25 114 730 1041
① in 14.25 24.50 13.25 6.75 7.00 13.12 4.81 0.88 6.00 16.46 8.12 1.30 4.50 28.55 43.49
RS4323AA
10 mm 362 622 337 171 178 333 122 22 152 418 206 33 114 725 1105
Model U V AA
T W X Y Z BB CC DD EE FF GG
Number (in) (in) (in)
in 6.00 0.69 N/A 18.94 3.00 5.50 1.46 14.00 6.37 1.19
N4323AA 2.44 .62 x .31 1.00
mm 152 18 N/A 481 76 140 37 356 162 30
in 6.62 0.69 1.25 19.25 3.25 7.75 2.01 19.00 7.17 1.20
R4323AA 3.44 .88 x .44 1.50
mm 168 18 32 489 83 197 51 483 182 31
in 6.62 0.88 1.25 19.25 3.25 7.75 2.01 19.00 7.17 1.20
RS4323AA 3.44 .88 x .44 1.50
mm 168 22 32 489 83 197 51 483 182 31
① Ports are suitable for use with Class 150 ANSI steel or stainless steel companion flanges or flanged fittings.
These dimensions are average and not for construction purposes. Certified prints on request.
NPSH REQUIRED
Printed performance curves are not available.
Performance curves can be electronically generated with the Viking Pump Curve Generator on vikingpump.com.
NPSHR data is not available on the curve generator.
NPSH (Net Positive Suction Head): The NPSHR (Net Positive Suction Head Required by the pump) is given in the table below
and applies for viscosities through 750 SSU. NPSHA (Net Positive Suction Head – Available in the system) must be greater than
the NPSHR. For a complete explanation of NPSH, see Application Data Sheet AD-19.
FOR VISCOSITIES UP TO 750 SSU – See NPSHR table below.
NPSHR for high viscosities can be estimated using the following method:
1. Calculate line loss for a 1 foot long pipe of a diameter matching the pump inlet port size. Use your flow rate and max viscosity.
2. Convert this value into Feet of Liquid (S.G. 1.0)
3. Add this value to the NPSHR value in the chart below.