Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 79 views

    Series PWS30/ PWS30-2: Pure Water

    Uploaded by

    Watts
    The Watts Pure Water PWS30 series water softening systems are high efficient conventional cation exchange type water softeners. They are suitable for commercial applications ranging from 300,000 to 1,050,000 grains of hardness removal per tank and flow rates up to 280 gallons per minute. Softened water provides a wide variety of benefits from not introducing scale into pipes, valves, water heating equipment, heat exchangers, cooling towers, sterilizer make up water, washing, and process water.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Series PWS30/ PWS30-2: Pure Water

    Uploaded by

    Watts
    79 views3 pages
    The Watts Pure Water PWS30 series water softening systems are high efficient conventional cation exchange type water softeners. They are suitable for commercial applications ranging from 300,000 to 1,050,000 grains of hardness removal per tank and flow rates up to 280 gallons per minute. Softened water provides a wide variety of benefits from not introducing scale into pipes, valves, water heating equipment, heat exchangers, cooling towers, sterilizer make up water, washing, and process water.

    Original Title

    ES-WQ-PWS30

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Watts Pure Water PWS30 series water softening systems are high efficient conventional cation exchange type water softeners. They are suitable for commercial applications ranging from 300,000 to 1,050,000 grains of hardness removal per tank and flow rates up to 280 gallons per minute. Softened water provides a wide variety of benefits from not introducing scale into pipes, valves, water heating equipment, heat exchangers, cooling towers, sterilizer make up water, washing, and process water.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    79 views3 pages

    Series PWS30/ PWS30-2: Pure Water

    Uploaded by

    Watts
    The Watts Pure Water PWS30 series water softening systems are high efficient conventional cation exchange type water softeners. They are suitable for commercial applications ranging from 300,000 to 1,050,000 grains of hardness removal per tank and flow rates up to 280 gallons per minute. Softened water provides a wide variety of benefits from not introducing scale into pipes, valves, water heating equipment, heat exchangers, cooling towers, sterilizer make up water, washing, and process water.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    ES-WQ-PWS30

    For Commercial Applications


    Job Name Job Location Engineer Approval Contractor Approval Contractors P.O. No. Representative

    Series PWS30/ PWS30-2

    PURE WATER

    Commercial Water Softening Systems


    Connection Size: 3" (80 mm) Flow Rates: Up to 280 gpm (1059 lpm)
    The Watts Pure Water PWS30 series water softening systems are high efficient conventional cation exchange type water softeners. They are suitable for commercial applications ranging from 300,000 to 1,050,000 grains of hardness removal per tank and flow rates up to 280 gallons per minute. Where continuous softened water is required PWS30-2 duplex alternating systems can be specified for uninterrupted service. Regeneration is meter demand initiated. All cycles of regeneration are fully automatic and do not require manual actuation. Watts Pure Water PWS30 series water softeners are designed for point of use or point of entry applications where the benefits of softened water are required. These systems exchange scale forming calcium and magnesium ions with non-scale forming sodium ions to create soft water for a variety of applications. Steam boiler make up water, water heater pretreatment, reverse osmosis pretreatment, cooling tower make up water, sterilizer make up water, washing, and process water are all common applications for the Watts Pure Water PWS30 series water softeners. Softened water provides a wide variety of benefits from not introducing scale into pipes, valves, water heating equipment, heat exchangers, and cooling towers to reducing mineral build up in areas that see excessive splashing such as food preparation counters and sink areas. Softened water also conserves soaps and cleaning agents by eliminating the formation of soap curd, so your cleaners can work on cleaning not reacting with the hardness in your water.
    Series PWS30 Series PWS30-2

    Standards
    Control Valve- WQA Certified to NSF/ANSI Std. 61 Ion Exchange Resin- NSF Certified to ANSI Std. 44 Mineral Tank- NSF Certified to ANSI Std. 44 or 61

    Specifications
    A Watts Pure Water PWS30 series water softening system shall be installed on the buildings main water line just after it enters the building. The installation point shall be after any back flow prevention or pressure regulating valves. Other installation options are to install a system just before the water heater or other types of equipment needing the protection of softened water. In installations where dedicated cold water make up to a water heater is the installation point a back flow preventer and a thermal expansion tank must be installed as well. The system shall be installed with a bypass valve to allow for the shut down and removal of the unit without interrupting the water supply to the building. The water softener shall be a down flow regenerated, metered demand, sodium cycle cation exchange type system with all components necessary for proper operation. Electrical requirements are 120 volt 60 hertz. A local drain is required to accept drain water from the system. The feed water pressure must not fall below 25psi or exceed 125psi. Water temperature must not fall below 34F or exceed 110F. The system shall provide softened water measuring less than one grain per gallon of hardness as Calcium Carbonate when operated within the manufacturers operational specifications.

    Features
    WQA Certified fully automatic metered demand control valve S  ophisticated digital electronic controls that store operating history that can be accessed by the user Fully adjustable regeneration cycles Durable brass bodied control valve for years of service Dry contact lock out switch for remote interface is standard NSF Certified high capacity resin Highly corrosion resistant NSF Certified fiberglass tanks Durable polypropylene lower distribution system

    Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

    Feed Water Guidelines


    pH . . . . . . . . . . . . . . . . . . . . . . . . 6 to 10 Hardness (maximum) . . . . . . . . . . Depends on customers acceptable hardness leakage level. Water Pressure . . . . . . . . . . . . . . 25psi to 125psi (171 kPa to 8.5 bar) Temperature . . . . . . . . . . . . . . . . 34 - 110F (1 - 43C) Free Chlorine (maximum) . . . . . . . 1mg/L Iron (maximum) . . . . . . . . . . . . . . 1mg/L Oil and H2S . . . . . . . . . . . . . . . . . None Allowed Turbidity . . . . . . . . . . . . . . . . . . . Less than 5.0 NTU

    * For all other guideline information please contact your Watts representative.

    Dimensions - Weight
    PWS30 Series
    E E D D

    PWS30-2 Series
    E E D D

    F F

    FF
    B B A A
    C C B B

    C C

    A A

    G G

    G G

    FRONT

    FRONT

    SIDE

    SIDE

    FRONT FRONT

    SIDE SIDE

    Model number A in. mm in. B mm in.


    1 4 3 4

    Dimensions C mm in. D mm in. E mm in. F mm in. G mm lbs

    WEIGHTS kgs

    PWS30151H11 PWS30151I11 PWS30151J11 PWS30151K11 PWS30151L11 PWS30151H21 PWS30151I21 PWS30151J21 PWS30151K21 PWS30151L21

    79 / 81 / 871/4 951/4 995/8 797/16 817/16 871/4 951/4 995/8


    7 16 7 16

    2017 2068 2216 2419 2530 2017 2068 2216 2419 2530

    79 / 81 / 871/4 951/4 995/8 797/16 817/16 871/4 951/4 995/8


    7 16 7 16

    2017 95 / 2068 96 / 2216 101 2419 108 2530 1123/8 2017 951/4 2068 963/4 2216 101 2419 108 2530 1123/8

    2419 2457 2565 2743 2854 2419 2457 2565 2743 2854

    24 / 30 / 361/8 44 503/8 241/2 301/8 361/8 44 503/8


    1 2 1 8

    622 765 917 1118 1280 622 765 917 1118 1280

    24 / 30 / 361/8 44 503/8 85 100 111 126 150


    1 2 1 8

    622 765 917 1118 1280 2159 2540 2819 3200 3810

    30 39 39 42 50 30 39 39 42 50

    762 991 991 1067 1270 762 991 991 1067 1270

    50 48 60 60 60 50 48 60 60 60

    1270 1219 1524 1524 1524 1270 1219 1524 1524 1524

    1070 1600 2015 3245 4295 2070 3000 4015 6245 8295

    486 727 916 1475 941 941 1364 1325 2839 3770

    Specifications
    MODEL NUMBER TANK SIZE Mineral Tank RESIN GRAVEL Ft3 Brine Tank TANK SALT size fill Softening CAPACITY Max min Lbs. Salt Per REGENERATION max MIN Flow Rate & PressurE SERV DROP BKW GPM PSI GPM

    PWS30151H11 PWS30151I11 PWS30151J11 PWS30151K11 PWS30151L11

    24x72 30x72 36x72 42x72 48x72

    10 15 20 30 35

    200 lbs. 400 lbs. 500 lbs. 700 lbs. 900 lbs.

    30x50 39x48 39x60 42x60 50x60

    1400 2200 2700 3100 4500

    300 K 450 K 600 K 900 K 1050K

    200 K 300 K 400 K 600 K 700 K

    150 225 300 450 525

    60 90 120 180 210

    120/170 158/212 185/250 200/268 213/280

    15/25 15/25 15/25 15/25 15/25

    15 25 35 45 60

    Ordering Information
    MODEL NUMBER DESCRIPTION SPACE REQUIRED DXWXH WEIGHT

    PWS30151H11 PWS30151I11 PWS30151J11 PWS30151K11 PWS30151L11 PWS30151H21 PWS30151I21 PWS30151J21 PWS30151K21 PWS30151L21

    10 Cubic Foot 3" Simplex Softener with Flow Meter 15 Cubic Foot 3" Simplex Softener with Flow Meter 20 Cubic Foot 3" Simplex Softener with Flow Meter 30 Cubic Foot 3" Simplex Softener with Flow Meter 35 Cubic Foot 3" Simplex Softener with Flow Meter 10 Cubic Foot 3" Duplex Alternating Softener with Flow Meter 15 Cubic Foot 3" Duplex Alternating Softener with Flow Meter 20 Cubic Foot 3" Duplex Alternating Softener with Flow Meter 30 Cubic Foot 3" Duplex Alternating Softener with Flow Meter 35 Cubic Foot 3" Duplex Alternating Softener with Flow Meter

    39 x 69 x 103 39 x 75 x 107 39 x 81 x 109 42 x 90 x 117 50 x 104 x 117 39 x 100 x 103 39 x 117x 107 39 x 129 x 109 42 x 144 x 117 50 x 164 x 117

    1070 lbs. 1600 lbs. 2015 lbs. 3245 lbs. 4295 lbs. 2070 lbs. 3000 lbs. 4015 lbs. 6245 lbs. 8295 lbs.

    Notes: Capacities are based on resin manufactures data and are dependent upon influent water TDS, temperature, bed depth, and flow rates. Feed water must be free of oil and color and. Pipe size, tank size, and space requirements are in inches. Capacities and flow rates expressed above are per tank. Flow rates listed at 25psi drops are for intermittent peak flow rates and are not to be used as continuous flows.

    A Watts Water Technologies Company

    USA: North Andover, MA Tel. (800) 224-1299 www.watts.com Canada: Burlington, ON Tel. (888) 208-8927 www.wattscanada.ca

    ES-WQ-PWS30 1105

    2011 Watts

    You might also like