TEMPLATE VERSION: 09/16/08

8 7 6 5 4 3 2 1
1021643 1 OF 2 ITEM QTY. UM SPC PART NO. PART DESCRIPTION FWT/UNIT (lb)
1 1 EA Y AA-272-2343 COUNTERSHAFT BOX,52 1007
11 10 13 15 04 03 01
2 1 EA Y 23G39 FTG,NPT,HOL HEX PLUG,12 0
03
01 3 1 EA Y 64B95 O-RING,-465,NITRILE,70 DURO 0
19 4 8 EA Y 10Z95 HHCS,1-1/4"X3-1/2" GR5 2
17 REFERENCE 02 5 0.01 EA Y 10H53 ANTI-SEIZE&LUB.COMP. #NS-160 1
21 SHEAVE 6 8 EA Y 10W72 CHW,1-1/4" 0
20
7 1 EA Y BA-272-2343 COUNTERSHAFT,52 222
8 2 EA Y 10E19 CONE & ROLLER 13
9 2 EA Y 10E20 BEARING CUP 9
18 REFERENCE 10 1 EA Y A-272-338 LOCK WASHER 2
BUSHING 11 1 EA Y B-272-338 ANGLE KEY 0
12 1 EA Y DC-272-2143 ADJUSTING NUT 9
D 13 1 EA Y 63J05 SCREW,BUTTON HD C 5/8"X 3" 0 D
14 1 EA Y 63J04 SCREW,BUTTON HD C 1/2"X1-3/4" 0
15 1 EA Y 27L84 LOCKWASHER,5/8" 0
16 1 EA Y 27L81 LOCKWASHER,1/2" 0
12 16 14 17 1 EA Y DB-272-2143 OIL GUARD 20
18 1 EA Y 63D81 OIL SEAL, 4-3/8" 1
REFERENCE 19 1 EA Y 63J06 O-RING,-278,NITRILE,70 DURO 0
KEY 20 4 EA Y 26C48 HHCS,5/8"X1-1/2" GR5 0
REFERENCE 21 4 EA Y 63J03 WASHER,STAT-O-SEAL 5/8" 0
BUSHING HARDWARE 22 1 EA Y C-18-1136 CUT BEVEL PINION 224
23 1 EA Y B-17-535 TAPER KEY 1"X1"X7" 2
24 2 EA Y CA-272-2343 SHIM .008" THICK 0
25 2 EA Y CB-272-2343 SHIM .015" THICK 0
26 2 EA Y CC-272-2343 SHIM .035" THICK 1
27 2 EA Y CD-272-2343 SHIM .062" THICK 1
04 28 1 EA Y 27S97 AIR BREATHER 3/4"NPTF 10
04 29 1 EA Y 23B25 PIPE CPLG. 3/4" 0
30 1 EA Y C-17-123 NIPPLE 3/4"x3" 0
24 04
31 0.01 EA Y 16G29 PIPE SEALANT 250ml TUBE 1
04
25
26
27

3 01

C C

2 03

1 01 03 04 28 31
29 04
30 31 6
4 5
02

8
SHIM BETWEEN
SHAFT KEYWAY AND 23
B
KEY AS NEEDED B

22
7

A A
TITLE SCALE WT(lbs)
C'SHAFT BOX ASSY,52H/SBS 1:6 1554
DRAWN DATE
UPDATED AA-272-2343 PER MACHINING REVISIONS; 8 SDN 08/12/2006
04 ADDED QTY (1) EA: 27S97, 23B25 AND C-17-123; ADDED 43491 01/07/2011 SDN AVM
QTY (0.01) OF 16G29 FOR SIMILAR TO CHECKED DATE
03 UPDATED AA-272-2343 PER MACHINING REVISIONS; 42810 02/04/2010 RCB SDN 52 CONE CRUSHER --- RCB 08/12/2006
ADDED QTY (1) OF 23G39
02 ADDED QTY (0.01) OF 10H53 ANTI-SEIZE, DELETED QTY 40270 12/07/2006 SDN PQ
9 ALL INFORMATION CONTAINED ON TELSMITH INC. APPROVED DATE
(1.0) OF 14Z86 THREADLOCKER
THIS DRAWING IS CONSIDERED N10910 INDUSTRIAL DRIVE PQ 08/12/2006
REVISED TO REFLECT CHANGES IN AA-272-2343 DIMENSIONS ARE IN INCHES UNLESS NOTED
01 COUNTERSHAFT BOX, ADDED QTY (1) OF 64B95 O-RING,- 40003 08/30/2006 SDN PQ CONFIDENTIAL AND IS THE SOLE MEQUON, WI. 53092 DRAWING NO.
TOLERANCES UNLESS NOTED: PROPERTY OF TELSMITH, INC.
1021643
465,NITRILE,70 DURO

D
00 RELEASED FOR PRODUCTION --- 08/12/2006 SDN PQ ANGULAR: MACH 0.5 BEND 2 ANY REPRODUCTION IN PART
ONE PLACE DECIMAL: .2" OR AS A WHOLE WITHOUT THE
REV DESCRIPTION ECO DATE BY APP
TWO PLACE DECIMAL: .06" WRITTEN PERMISSION OF SPC REV. SHEET NO.
REVISIONS THREE PLACE DECIMAL: .010" TELSMITH, INC. IS PROHIBITED. YS 04 1 OF 2
8 7 6 5 4 3 2 1

CURRENT REVISION APPROVED

TEMPLATE VERSION: 09/16/08
8 7 6 5 4 3 2 1
1021643 2 OF 2
A
13 15
C
4) INSTALL SOCKET HEAD CAP
3) INSTALL SOCKET HEAD CAP 12 SCREW TO PINCH ADJUSTING
SCREW THROUGH ADJUSTING NUT.
NUT AND THREAD INTO ADJUSTING
NUT LOCKWASHER. IF NECESSARY,
SLIGHTLY TIGHTEN ADJUSTING NUT
TO EXPOSE THREADED HOLE IN
ADJUSTING NUT LOCKWASHER. DO
D NOT LOOSEN ADJUSTING NUT. D

14
16

SECTION A-A SECTION C-C

C A C C

1) REMOVE ALL SHARP EDGES FROM

SHAFT. ASSEMBLE ADJUSTING NUT
LOCKWASHER AND LOCKWASHER KEY
AS SHOWN.
10
2) TIGHTEN ADJUSTING NUT TO OBTAIN
11 13 15 PROPER BEARING CLEARANCE.

5) INSTALL O-RING INTO GROOVE

IN OIL GUARD AND HOLD IN PLACE
12 WITH HEAVY GREASE.

19
B
6) INSTALL OIL GUARD AND FASTEN USING B
BOLTS WITH STAT-O-SEAL WASHERS.

17

21
20

18

DETAIL B 7) LIGHTLY OIL SHAFT AND OIL GUARD

SCALE 1 : 2 BORE BEFORE PRESSING SEAL IN FLUSH
WITH THE FRONT OF THE OIL GUARD.
A A
TITLE SCALE WT(lbs)
C'SHAFT BOX ASSY,52H/SBS 1:4 1554
DRAWN DATE
UPDATED AA-272-2343 PER MACHINING REVISIONS; ASSEMBLY INSTRUCTIONS SDN 08/12/2006
04 ADDED QTY (1) EA: 27S97, 23B25 AND C-17-123; ADDED 43491 01/07/2011 SDN AVM
QTY (0.01) OF 16G29 FOR SIMILAR TO CHECKED DATE
03 UPDATED AA-272-2343 PER MACHINING REVISIONS; 42810 02/04/2010 RCB SDN 52 CONE CRUSHER --- RCB 08/12/2006
ADDED QTY (1) OF 23G39
02 ADDED QTY (0.01) OF 10H53 ANTI-SEIZE, DELETED QTY 40270 12/07/2006 SDN PQ ALL INFORMATION CONTAINED ON TELSMITH INC. APPROVED DATE
(1.0) OF 14Z86 THREADLOCKER
THIS DRAWING IS CONSIDERED N10910 INDUSTRIAL DRIVE PQ 08/12/2006
REVISED TO REFLECT CHANGES IN AA-272-2343 DIMENSIONS ARE IN INCHES UNLESS NOTED
01 COUNTERSHAFT BOX, ADDED QTY (1) OF 64B95 O-RING,- 40003 08/30/2006 SDN PQ CONFIDENTIAL AND IS THE SOLE MEQUON, WI. 53092 DRAWING NO.
TOLERANCES UNLESS NOTED: PROPERTY OF TELSMITH, INC.
1021643
465,NITRILE,70 DURO

D
00 RELEASED FOR PRODUCTION --- 08/12/2006 SDN PQ ANGULAR: MACH 0.5 BEND 2 ANY REPRODUCTION IN PART
ONE PLACE DECIMAL: .2" OR AS A WHOLE WITHOUT THE
REV DESCRIPTION ECO DATE BY APP
TWO PLACE DECIMAL: .06" WRITTEN PERMISSION OF SPC REV. SHEET NO.
REVISIONS THREE PLACE DECIMAL: .010" TELSMITH, INC. IS PROHIBITED. YS 04 2 OF 2
8 7 6 5 4 3 2 1

CURRENT REVISION APPROVED