Basic Concepts of Computer :: 1

BASIC CONCEPTS OF COMPUTER

1.1 INTRODUCTION

Computer stand for Commonly Operating Machine Particularly Used for Technical,
Education & Research.
A computer is a programmable machine designed to perform arithmetic and logical
operations automatically and sequentially on the input given by the user and gives the
desired output after processing. Computer components are divided into two major
categories namely hardware and software. Hardware is the machine itself and its connected
devices such as monitor, keyboard, mouse etc. Software are the set of programs that make
use of hardware for performing various functions.

1.1.1 COMPUTER DEFINED

Computer is an electronic device, which is capable of:

• Receiving the Input

• Processing the data on the basis of given set of instructions

• Producing the output

• Storing the information ( if needed)

1.1.2 CHARLES BABBAGE

• Charles Babbage is the Father of Computer (British-mathematician-polymath)

• Invented Analytical Engine in 1822

• Analytical Engine contained:

• ALU ( arithmetic logic unit) , Basic flow control, and integrated memory

• First general-purpose computer concept.

1.2 OBJECTIVES

After going through this lesson you would be able to:

• familiarize yourself with characteristics of computers
• identify the basic components of a computer
• explain the importance of various units of a computer
• differentiate between system software and application
software
• explain the importance of operating system
• get acquainted with open source
• appreciate the need of computer security

1.3 CHARACTERISTICS OF COMPUTERS

The characteristics of computers that have made them so

powerful and universally useful are speed, accuracy, diligence,
versatility and storage capacity. Let us discuss them briefly.
 Basic Concepts of Computer :: 2

Speed

Computers work at an incredible speed. A powerful computer

is capable of performing about 3-4 million simple instructions
per second

Accuracy

In addition to being fast, computers are also accurate. Errors

that may occur can almost always be attributed to human error
(inaccurate data, poorly designed system or faulty instructions/
programs written by the programmer)

Diligence

Unlike human beings, computers are highly consistent. They

do not suffer from human traits of boredom and tiredness
resulting in lack of concentration. Computers, therefore, are
better than human beings in performing voluminous and
repetitive jobs.

Versatility

Computers are versatile machines and are capable of

performing any task as long as it can be broken down into a
series of logical steps. The presence of computers can be
seen in almost every sphere – Railway/ Air reservation, Banks,
Hotels, Weather forecasting and many more.

Storage Capacity

Today’s computers can store large volumes of data. A piece of

information once recorded (or stored) in the computer, can
never be forgotten and can be retrieved almost instantaneously.
1.4 COMPUTER ORGANIZATION

Fig.1.1: Computer System

 Basic Concepts of Computer :: 3

A computer system (fig.1.1) consists of mainly four basic

units; namely input unit, storage unit, central processing unit
and output unit. Central Processing unit further includes
Arithmetic logic unit and control unit, as shown in Figure 1.2.

A computer performs five major operations or functions

irrespective of its size and make. These are

• it accepts data or instructions as input,

• it stores data and instruction
• it processes data as per the instructions,
• it controls all operations inside a computer, and
• it gives results in the form of output.

1.4.1 Functional Units:

a. Input Unit: This unit is used for entering data and
programs into the computer system by the user for
processing.
– – ––

Dotted lines (– – – –) indicate

flow of instruction solid lines
(–––––) indicate flow of data
Fig. 1.2: Basic computer Organization

b. Storage Unit: The storage unit is used for storing data

and instructions before and after processing.
 Basic Concepts of Computer :: 4

c. Output Unit: The output unit is used for storing the

result as output produced by the computer after
processing.

d. Processing: The task of performing operations like

arithmetic and logical operations is called processing.
The Central Processing Unit (CPU) takes data and
instructions from the storage unit and makes all sorts of
calculations based on the instructions given and the type
of data provided. It is then sent back to the storage unit.
CPU includes Arithmetic logic unit (ALU) and control unit
(CU)

• Arithmetic Logic Unit: All calculations and

comparisons, based on the instructions provided, are
carried out within the ALU. It performs arithmetic
functions like addition, subtraction, multiplication,
division and also logical operations like greater than,
less than and equal to etc.

• Control Unit: Controlling of all operations like input,

processing and output are performed by control unit.
It takes care of step by step processing of all operations
inside the computer.

1.4.2 Memory
Computer’s memory can be classified into two types; primary
memory and secondary memory

a. Primary Memory can be further classified as RAM and

ROM.

• RAM or Random Access Memory is the unit in a

computer system. It is the place in a computer where
the operating system, application programs and the
data in current use are kept temporarily so that they
can be accessed by the computer’s processor. It is
said to be ‘volatile’ since its contents are accessible
only as long as the computer is on. The contents of
RAM are no more available once the computer is
turned off.
 Basic Concepts of Computer :: 5

ROM or Read Only Memory is a special type of memory

which can only be read and contents of which are not
lost even when the computer is switched off. It typically
contains manufacturer’s instructions. Among other
things, ROM also stores an initial program called the
‘bootstrap loader’ whose function is to start the
operation of computer system once the power is turned
on.

b. Secondary Memory

RAM is volatile memory having a limited storage capacity.

Secondary/ auxiliary memory is storage other than the
RAM. These include devices that are peripheral and are
connected and controlled by the computer to enable
permanent storage of programs and data.

Secondary storage devices are of two types; magnetic and

optical. Magnetic devices include hard disks and optical
storage devices are CDs, DVDs, Pen drive, Zip drive etc.

• Hard Disk

Fig. 1.3: Hard Disk

Hard disks are made up of rigid material and are usually a

stack of metal disks sealed in a box. The hard disk and the
hard disk drive exist together as a unit and is a permanent
part of the computer where data and programs are saved.
These disks have storage capacities ranging from 1GB to
80 GB and more. Hard disks are rewritable.
 Basic Concepts of Computer :: 6

• Compact Disk

Compact Disk (CD) is portable disk having data storage

capacity between 650-700 MB. It can hold large amount
of information such as music, full-motion videos, and text
etc. CDs can be either read only or read write type.

• Digital Video Disk

Digital Video Disk (DVD) is similar to a CD but has larger

storage capacity and enormous clarity. Depending upon
the disk type it can store several Gigabytes of data. DVDs
are primarily used to store music or movies and can be
played back on your television or the computer too. These
are not rewritable.

1.4.3 Input / Output Devices:

These devices are used to enter information and instructions
into a computer for storage or processing and to deliver the
processed data to a user. Input/ Output devices are required
for users to communicate with the computer. In simple terms,
input devices bring information INTO the computer and output
devices bring information OUT of a computer system. These
input/ output devices are also known as peripherals since they
surround the CPU and memory of a computer system.

a) Input Devices

An input device is any device that provides input to a

computer. There are many input devices, but the two most
common ones are a keyboard and mouse. Every key you
press on the keyboard and every movement or click you
make with the mouse sends a specific input signal to the
computer.

• Keyboard: The keyboard is very much like a standard

typewriter keyboard with a few additional keys. The basic
QWERTY layout of characters is maintained to make it
easy to use the system. The additional keys are included
to perform certain special functions. These are known
as function keys that vary in number from keyboard to
keyboard. (see fig. 1.4)
 Basic Concepts of Computer :: 7

Alphanumeric Keypad/
Special-function Keys Function Keys
Cursor Movement
Keys

Numeric Keypad

Fig. 1.4: Keyboard

• Mouse: A device that controls the movement of the cursor

or pointer on a display screen. A mouse is a small object
you can roll along a hard and flat surface (Fig. 1.5). Its
name is derived from its shape, which looks a bit like a
mouse. As you move the mouse, the pointer on the display
screen moves in the same direction.

Fig. 1.5: Mouse

• Trackball: A trackball is an input device used to enter

motion data into computers or other electronic devices.
It serves the same purpose as a mouse, but is designed
with a moveable ball on the top, which can be rolled in
any direction.
• Touchpad: A touch pad is a device for pointing (controlling
input positioning) on a computer display screen. It is an
alternative to the mouse. Originally incorporated in laptop
computers, touch pads are also being made for use with
desktop computers. A touch pad works by sensing the
user’s finger movement and downward pressure.
• Touch Screen: It allows the user to operate/ make
selections by simply touching the display screen. A display
 Basic Concepts of Computer :: 8

Screen that is sensitive to the touch of a finger or stylus.

Widely used on ATM machines, retail point-of-sale
terminals, car navigation systems, medical monitors and
industrial control panels.
• Light Pen: Light pen is an input device that utilizes a
light-sensitive detector to select objects on a display
screen. (Fig. 1.6)

Fig. 1.6 Light Pen

• Magnetic ink character recognition (MICR): MICR can

identify character printed with a special ink that contains
particles of magnetic material. This device particularly
finds applications in banking industry.

• Optical mark recognize t ion (OMR): Optical mark

recognition, also called mark sense reader is a technology
where an OMR device senses the presence or absence of
a mark, such as pencil mark. OMR is widely used in tests
such as aptitude test.

• Bar code reader: Bar-code readers are photoelectric

scanners that read the bar codes or vertical zebra strips
marks, printed on product containers. These devices are
generally used in super markets, bookshops etc.
• Scanner: Scanner is an input device that can read text
or illustration printed on paper and translates the
information into a form that the computer can use. A
scanner works by digitizing an image. (Fig. 1.7)
 Basic Concepts of Computer :: 9

Fig. 1.7 Scanner

b. Output Devices:

Output device receives information from the CPU and

presents it to the user in the desired from. The processed
data, stored in the memory of the computer is sent to the
output unit, which then converts it into a form that can
be understood by the user. The output is usually
produced in one of the two ways – on the display device,
or on paper (hard copy).

• Monitor: is often used synonymously with “computer

screen” or “display.” Monitor is an output device that
resembles the television screen (fig. 1.8). It may use a
Cathode Ray Tube (CRT) to display information. The
monitor is associated with a keyboard for manual input
of characters and displays the information as it is keyed
in. It also displays the program or application output.
Like the television, monitors are also available in different
sizes.

Fig. 1.8: Monitor

 Basic Concepts of Computer :: 10

• Printer: Printers are used to produce paper

(commonly known as hardcopy) output. Based on
the technology used, they can be classified as
Impact or Non-impact printers.

Impact printers use the typewriting printing

mechanism wherein a hammer strikes the paper
through a ribbon in order to produce output. Dot-
matrix and Character printers fall under this
category.
Non-impact printers do not touch the paper
while printing. They use chemical, heat or
electrical signals to etch the symbols on paper.
Inkjet, Deskjet, Laser, Thermal printers fall under
this category of printers.
• Plotter: Plotters are used to print graphical
output on paper. It interprets computer
commands and makes line drawings on paper
using multicolored automated pens. It is capable
of producing graphs, drawings, charts, maps etc.
(Fig. 1.9)

Fig. 1.9 Plotter

• Facsimile (FAX): Facsimile machine, a device

that can send or receive pictures and text over a
telephone line. Fax machines work by digitizing
an image.

• Sound cards and Speaker(s): An expansion

board that enables a computer to manipulate and
output sounds. Sound cards are necessary for
nearly all CD-ROMs and have become common
 Basic Concepts of Computer :: 11

place on modern personal computers. Sound

cards enable the computer to output sound
through speakers connected to the board, to
record sound input from a microphone
connected to the computer, and manipulate
sound stored on a disk.