Product Dimensions, Standards and Weights DIN 939 Technical Specifications

Metric DIN 939 Double End Studs (1.25xD)

Visit our online store for product availability

Dimensions of Metric DIN 939 Double End Studs

DIAMETER
PITCH 1.25XD (B1) (B2) L < 125 (B2) L = 125-200 (B2) L ≥ 200 X1 X2
(D)
M8 1.25 10 22 28 – 3.2 1.6
M10 1.5 12 26 32 45 3.8 1.9
M12 1.75 15 30 36 49 4.3 2.2
M14 2 18 34 40 53 5 2.5
M16 2 20 38 44 57 5 2.5
M18 2.5 22 42 48 61 6.3 3.2
M20 2.5 25 46 52 65 6.3 3.2
M22 2.5 28 50 56 69 6.3 3.2
M24 3 30 54 60 73 7.5 3.8
M27 3 35 60 66 79 7.5 3.8
M30 3.5 38 66 72 85 9 4.5
M33 3.5 42 72 78 91 9 4.5
M36 4 45 78 84 97 10 5
M39 4 50 84 90 103 10 5
M42 4.5 52 90 96 109 11 5.5
M45 4.5 58 98 102 115 11 5.5
M48 5 60 102 108 121 13 6.3
M52 5 65 110 116 129 13 6.3

Aspen Fasteners 4807 Rockside Road, Suite 400, Independence, OH 44131 USA
www.aspenfasteners.com | aspensales@aspenfasteners.com | 1-800-479-0056

Headquarters: Independence OH USA; Montreal QC Canada;

Distribution Centers: Boston MA; Chicago IL; Cincinnati KY; Dallas TX; Denver CO; Houston TX; Jersey City NJ; Los Angeles CA; Miami FL;
San Francisco CA; Seattle WA; Washington VA; Toronto ON; Calgary AB; Vancouver BC; Jiutepec (Temixco); Mexico City; Monterrey
Metric DIN 939 double end studs are machine thread fasteners without a head and may or may not be fully threaded
depending on the length of the fastener. Depending on the application, both ends can accept a nut or one end may be
threaded into a pre-tapped hole, leaving the other end available for attaching a mated component secured with a nut.
Studs assemblies offer several advantages over bolts: They eliminate the need for perfect squareness in an assembly
allowing a nut to "float" and adjust on the nut end threads. Furthermore studs can act as pilots to ease the assembly and
disassembly of mated parts.

When ordering DIN 939 double end studs, the correct dimension is diameter x nominal length (excluding the tap end b1).
For example, with a stud measuring M10X50 (the diameter(d) = 10mm and nominal length(l) = 50 mm where the thread
length on the metal end (tap end) b1 = 12 mm; the overall length of the stud is 50 + 12 = 62 mm. The thread length on the
nut end b2 varies depending on the length of the stud as illustrated in the table above.
Note: Studs whose length (L) is less than or equal to 2 times their nominal diameter + 6mm, will normally be fully
threaded.

Aspen Fasteners offers one of the most complete ranges of metric studs and other inch and metric industrial fasteners for
immediate delivery from stock. The following sizes of metric DIN 939 double end studs are available for immediate
shipping from stock: Diameters ranging from M5 to M30 and lengths to 120mm in A2 and marine grade A4 stainless steel.
View parts by clicking on the following link: DIN 939 double end studs

DIN (Deutsches Institut für Normung - German Institute for Standardization) standards are issued for a variety of
components including industrial fasteners as Metric DIN 939 double end studs. The DIN standards remain common in
Germany, Europe and globally even though the transition to ISO standards is taking place. DIN standards continue to be
used for parts which do not have ISO equivalents or for which there is no need for standardization.

1) Mechanical properties of stainless steel for metric DIN 939 Double End Studs

Stainless steels can be divided into three groups of steel - austenitic, ferritic and martensitic. Austenitic steel is by
far the most common type (>90% of commercial fasteners). The steel groups and strength classes are designated by a
four-digit sequence of letters and numbers (eg A2-70) as shown in the following table. DIN EN ISO 3506 governs screws
and nuts made from stainless steel.

Screws, Nuts and Bolts

Tensile Tensile
Strength strength strength Dia range Nut Load
Steel grade N/mm2 PSI
class N/mm2
Steel group

50 500 70,000 <=M39 500

Austenitic A2 and A4 70 700 100,000 <=M20 700
80 800 118,000 <=M20 800
The tensile stress is calculated with reference to the tensile stress area (see DIN EN ISO 3506-1979). Nuts to be paired
with same grade of stainless steel screws

Aspen Fasteners 4807 Rockside Road, Suite 400, Independence, OH 44131 USA
www.aspenfasteners.com | aspensales@aspenfasteners.com | 1-800-479-0056

Headquarters: Independence OH USA; Montreal QC Canada;

Distribution Centers: Boston MA; Chicago IL; Cincinnati KY; Dallas TX; Denver CO; Houston TX; Jersey City NJ; Los Angeles CA; Miami FL;
San Francisco CA; Seattle WA; Washington VA; Toronto ON; Calgary AB; Vancouver BC; Jiutepec (Temixco); Mexico City; Monterrey
 Steel Property Made From Characteristics
group Strength
class
50 A1, A2 Soft; cold worked, turned and soft pressed fasteners
Austenitic 70 A2, A4 Cold worked, normal70,000
strength formed fasteners
fasteners
<=M39
80 A2, A4 Extreme cold worked, high strength, special applications
70,000
500
fasteners fasteners
<=M39
70,000
500
<=M39
500
2) Chemical composition of stainless steel metric DIN 939 Double End Studs

Grade USA Grade Material Material C Si Mn Cr Mo Ni

designation no. % ≤% ≤% % % %

17.5 8.0
≤
X 5Cr Ni 1810 1.4301 1.0 2.0 to - to
0.07
19.5 10.5
18.0 10
≤
A2 304 X 2 Cr Ni 1811 1.4306 1.0 2.0 to - to
0.03
20.0 12.0
17.0 11.0
≤
X 8 Cr Ni 19/10 1.4303 1.0 2.0 to - to
0.07
19.0 13.0
16.5 2.0 10.0
≤
X 5 Cr Ni Mo 1712 1.4401 1.0 2.0 to to to
0.07
18.5 2.5 13.0
A4 316
16.5 2.0 10
≤
X 2 Cr Ni Mo 1712 1.4404 1.0 2.0 to to to
0.03
18.5 2.5 13

Aspen Fasteners 4807 Rockside Road, Suite 400, Independence, OH 44131 USA
www.aspenfasteners.com | aspensales@aspenfasteners.com | 1-800-479-0056

Headquarters: Independence OH USA; Montreal QC Canada;

Distribution Centers: Boston MA; Chicago IL; Cincinnati KY; Dallas TX; Denver CO; Houston TX; Jersey City NJ; Los Angeles CA; Miami FL;
San Francisco CA; Seattle WA; Washington VA; Toronto ON; Calgary AB; Vancouver BC; Jiutepec (Temixco); Mexico City; Monterrey
3) Chemical composition of steel metric DIN 939 Double End Studs

CHEMICAL COMPOSITION LIMITS %

TEMPERING
PROPERTY
MATERIAL AND TREATMENT C P S TEMP ºC MIN.
CLASS
min. max. max. max.
4.6, 4.8, 5.8, 6.8 Low or medium carbon steel - 0.55 0.05 0.06 -
8.8 Medium carbon steel quenched, tempered 0.25 0.55 0.04 0.05 425
9.8 Medium carbon steel quenched, tempered 0.25 0.55 0.04 0.05 425
Medium carbon steel additives e.g. boron, Mn, Cr or
10.9 0.20 0.55 0.04 0.05 425
Alloy steel - quenched, tempered
12.9 Alloy steel - quenched, tempered 0.20 0.50 0.035 0.035 380

4) Mechanical properties of steel for metric DIN 939 Double End Studs

PROPERTY CLASS

8.8
MECHANICAL PROPERTY
4.8 5.6 5.8 6.8 Up to M Over M 9.8 10.9 12.9
16 16
Tensile Strength nom. 400 500 600 800 900 1000 1200
(Rm, N/mm²) min. 420 500 520 600 800 830 900 1040 1220
min. 130 155 160 190 250 255 290 320 385
Vickers Hardness
max 250 320 336 360 380 435
min. 124 147 152 181 319 242 266 295 353
Brinell Hardness
max. 238 385 319 342 363 412
min. HR 71 79 82 89 -
HRC - - - - 20 23 28 32 39
Rockwell Hardness
HR 95 99 -
max. HRC - - - - 32 34 37 39 44
Yield Stress ReL. nom. 320 300 400 480 -
N/mm² min. 340 300 420 480 -
Stress at permanent nom. - 640 720 900 1080
set limit N/mm² min. - 640 660 720 940 1100

Disclaimer
Dimensional data and technical information for Metric DIN 939 double end studs was obtained from publicly available
sources and not acquired through standards agencies. It has been completed and compiled for reference purposes only;
where discrepancies are found they are subject to change without notice. Aspen Fasteners makes no warranties or
representations regarding the accuracy and validity of the compiled information and data. Contact the relevant standards
authorities for accurate and detailed information.

Aspen Fasteners 4807 Rockside Road, Suite 400, Independence, OH 44131 USA
www.aspenfasteners.com | aspensales@aspenfasteners.com | 1-800-479-0056

Headquarters: Independence OH USA; Montreal QC Canada;

Distribution Centers: Boston MA; Chicago IL; Cincinnati KY; Dallas TX; Denver CO; Houston TX; Jersey City NJ; Los Angeles CA; Miami FL;
San Francisco CA; Seattle WA; Washington VA; Toronto ON; Calgary AB; Vancouver BC; Jiutepec (Temixco); Mexico City; Monterrey