Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • North Gas Compression Plants (NGCP) Pipelines BI - 10-02029-0003 C/N - 6600042306

    Uploaded by

    Alam Shamsher
    326 views10 pages
    This document contains a 30 question safety evaluation for a contractor safety officer. It addresses topics such as: proper use of supplied air respirators, abrasive blasting certification requirements, flammable material storage distances, oxygen and fuel gas cylinder separation, injury reporting timelines, guardrail strength requirements, H2S detection limits, acetylene gauge pressures, wind speed limits for crane operation, work permit durations, stepladder and hand tool safety, fire watch duration after hot work, critical lift definitions, lifting over process piping requirements, load control methods, hold tag purposes, clearance distances for power lines, compressed gas cylinder handling, confined space oxygen levels, PPE for grinding, excavation spoil setbacks

    Original Description:

    Original Title

    null (2)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document contains a 30 question safety evaluation for a contractor safety officer. It addresses topics such as: proper use of supplied air respirators, abrasive blasting certification requirements, flammable material storage distances, oxygen and fuel gas cylinder separation, injury reporting timelines, guardrail strength requirements, H2S detection limits, acetylene gauge pressures, wind speed limits for crane operation, work permit durations, stepladder and hand tool safety, fire watch duration after hot work, critical lift definitions, lifting over process piping requirements, load control methods, hold tag purposes, clearance distances for power lines, compressed gas cylinder handling, confined space oxygen levels, PPE for grinding, excavation spoil setbacks

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    326 views10 pages

    North Gas Compression Plants (NGCP) Pipelines BI - 10-02029-0003 C/N - 6600042306

    Uploaded by

    Alam Shamsher
    This document contains a 30 question safety evaluation for a contractor safety officer. It addresses topics such as: proper use of supplied air respirators, abrasive blasting certification requirements, flammable material storage distances, oxygen and fuel gas cylinder separation, injury reporting timelines, guardrail strength requirements, H2S detection limits, acetylene gauge pressures, wind speed limits for crane operation, work permit durations, stepladder and hand tool safety, fire watch duration after hot work, critical lift definitions, lifting over process piping requirements, load control methods, hold tag purposes, clearance distances for power lines, compressed gas cylinder handling, confined space oxygen levels, PPE for grinding, excavation spoil setbacks

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 10

    NORTH GAS COMPRESSION PLANTS (NGCP) PIPELINES

    BI – 10-02029-0003 C/N - 6600042306


    CONTRACTOR SAFETY OFFICER EVALUATION

    NAME _______________________________ COMPANY ___________________________ DATE ________________

    Circle one of the suggested answers


    SECTION 1:

    1- What is the grade for supplied air for hood respirators during abrasive blasting?
    a. A
    b. B
    c. C
    d. D
    2- Who is allowed to perform abrasive blasting?
    a. All Saudi Aramco employees and contractors
    b. All Saudi Aramco employees and Contractors with 3rd party certification
    c. All Saudi Aramco certified employees and contractors
    d. Contractor abrasive blasters
    3- Flammable material storage areas cannot be located within ______of other buildings
    or Structures:
    a. 25 ft
    b. 50 ft
    c. 50 meters
    d. 100 ft
    4- Keep stored oxygen cylinders separated from fuel gas cylinders by __ or by __ high
    non-combustible barrier.
    a. 20ft, 10ft
    b. b.15ft, 5ft
    c. 20ft, 5ft
    d. 10, 5ft
    5- If someone is injured on your job site, a preliminary written report must be submitted
    to the Saudi Aramco PMT within ___ period of time and a final report within ____.
    a. 2 hours, 48 hours
    b. 24 hours, 72 hours
    c. 8 hours, 72 hours
    d. 1 hour, 48 hours

    6- Guardrail system shall be able to withstand, without failure a force of at least ____
    lbs. applied in any downward or horizontal direction at any point on the top rail or
    equivalent member.
    a. 200
    b. 300
    c. 400
    d. 500

    7- What is the minimum concentration of H2S that is considered immediately


    dangerous to life and health (IDLH)
    a. 10 ppm
    b. 50 ppm
    c. 100 ppm
    d. 1000 pp
    8- The maximum working pressure on an acetylene gauge is ___ psig.
    a. 7
    b.10
    c.15
    d.20
    9- Crane operations shall be stopped at wind speeds above ____ km/h
    a. 24
    b. 28
    c. 32
    d. 36
    10- How long is a work permit usually valid?
    a. 1 month
    b. 1 week
    c. 1 shift
    d. 1 day
    11- In order to use stepladders safely
    a. Two men should be on the ladder at the same time to balance the ladder
    b. Never stand on the top steps
    c. Stepladder should be used to gain access to roofs or other elevated surfaces
    d. Lean it against the wall for support
    e. All of the above
    12- What should people look for when inspecting hand tools before use?
    a. Check the load rating
    b. Missing or broken parts
    c. Electric rating
    d. Load rating
    13- How long should the appointed “Fire Watch” remain at the site of HOT work after the
    work has stopped?
    a. 10 minutes
    b. 15 minutes
    c. 20 minutes
    d. 30 minutes
    14- The flowing lifts is/are considered critical:
    a. Multiple or trailing lifts
    b. Night time crane lifts
    c. Crane suspended personnel platforms (man basket)
    d. All of the above
    e. A & C only
    15- When lifting over or adjacent to process piping, etc. what is required?
    a. Hold tag
    b. Welding machine
    c. Rigger level 1
    d. Hot work permit
    e. All of the above
    16- What is used to control suspended loads?
    a. Slings
    b. Guys
    c. Tag line
    d. Shackles
    e. All of the above
    17- What is the purpose of a hold tag?
    a. To isolate or de-energize equipment
    b. To work the job safely
    c. To explain the reason why the equipment is being locked out
    d. All of the above
    18- Crane boom shall be kept ____ feet from overhead power lines up to 50,000 volts
    and ____ feet over 250000 volts.
    a. 10;20
    b. 15;20
    c. 10;25
    d. 15;25
    19- Compressed gas cylinder requirements include:
    a. Don’t use cylinders that have dents, rust gouges, or burn marks
    b. Mark empty cylinders as MT
    c. Remove from service any gas cylinder in violation of the regulations
    d. All of the above
    20- A confined space must not be entered without wearing supplied air respirators if the
    ____ oxygen level is below:
    a. 21 %
    b. 18%
    c. 25%
    d. 19.5%
    21- When grinding a piece of metal with a portable power grinder, the type of Personal
    __________ Protective Equipment required is :
    a. Safety glasses only
    b. Goggles only
    c. Face shield only
    d Safety glasses/face shield combination
    22- Flammable materials storage areas cannot be located within………….of other buildings
    or structures:
    a. 25 ft
    b. 50 ft
    c. 50 meters
    d. 100 ft
    23- The ratio of vertical to horizontal spacing for a straight or extension ladder is
    a. 1 to 1
    b. 2 to 1
    c. 3 to 1
    d. 4 to 1
    24- A straight or extension ladder must extend over the edge of a roof, excavation, or
    scaffold platform by a minimum distance of:
    a. 1 foot
    b. 4 feet
    c. 0.9 meter
    d. No set distance
    25- The Saudi Aramco General instruction which sets forth the Work Permit Receiver’s
    requirements is:
    a. GI 1.200
    b. GI 5.430
    c. GI 2.100
    d. GI 6.200
    26- Work platforms must have toe boards, mid rails, top rails and access ladders once they
    reach a height of ………..:
    a. 4 ft
    b. 8 ft
    c. 6 ft
    d. When the height is four times greater than the base width
    27- Excavation “Spoils “ must be set back a minimum of………..from the side of the
    excavation.
    a. 1 meter
    b. 6 ft
    c. 3 ft
    d. 2 ft
    28- Which of the following would be classified as a Class “A” fire?
    a. A fire involving ordinary combustibles
    b. A fire involving flammable liquids
    c. A fire involving combustible metals
    d. A fire involving live electrical equipment
    29- The soil type that is least stable in an excavation is:
    a. Type A
    b. Type B
    c. Type C
    d. None of the above
    30- What is necessary for a worker to wear on a steel beam six feet or more above
    ground?
    a. A steel belt with steel or brass couplings
    b. A full body harness with lanyard attached to an anchor point
    c. He must never go on a steel beam
    d. None of the above
    SECTION 2

    1- When step ladders have steps on one side and rungs on the other, two men may be on
    the same ladder at the same time:
    a. True
    b. False

    2- Portable power tools being operated from an onsite generator need not be protected by
    a GFCI (ground fault circuit interrupter) to be consistent with the Saudi Armco CSM
    a. True
    b. False

    3- Excavation not subject to vehicle traffic may be barricaded using Red and White
    Warning Tape:
    a. True
    b. False
    4- The new heavy plastic 5 gallon drums may be used to store, transport, and diesel fuel only.
    a. True
    b. False

    5- Cigarette smoking is forbidden anywhere on Saudi Aramco construction sites except


    in designated and approved smoking shelters.
    a. True
    b. False
    6-- Holes may be drilled into sides of hard hats to provide for cross ventilation air-flow
    during very hot weather.
    a. True
    b. False

    7- If a tool breaks it is permissible to weld a piece of pipe as a handle temporarily


    a. True
    b. False

    8-- Soap and paper towels must be provided for the men to clean up before meals.
    a. True
    b. False

    9- Push sticks must be used to prevent direct contact with object and circular saw.
    a. True
    b. False
    10- Rubber boots must be provided for persons engaged in the pouring of concrete.
    a. True
    b. False

    11- When wearing rubber boots for concrete pours, it is not necessary to have your steel toe
    boots/shoes on.
    a. True
    b. False

    12- Can damage extension cards be used on S.A. project provided that they are properly
    spliced?
    a. Yes
    b. No

    13- Is dead man switch necessary in electrical hand tools?


    a. Yes
    b. No

    14- Is Flash back arrestor required for oxygen and acetylene cylinder regulator.
    a. Yes
    b. No

    15- Is it necessary to know the wind direction when alarm is heard?


    a. Yes
    b. No

    16- Is heavy equipment allowed to operate with 1.8m of any excavation?


    a. Yes
    b. No

    17- Are seat belts are required for all passengers inside vehicle.
    a. Yes
    b. No

    18- Can leave a gas cylinder fitting attached even when not in use as long as under a Shade.
    a. Yes
    b. No

    19- Oxygen cylinder and acetylene cylinder can stacked together as long as they are empty.
    a. Yes
    b. No
    20- It is allowed to work or stand under suspended load when the slings capacity
    More than the weight of load lifted
    a. Yes
    b. No

    21- It is permissible not to provide barricade for lifting operation when you are in the middle
    Of the desert and nobody is looking.
    a. Yes
    b. No

    22- Operating equipment having “danger do not operate” tag is allowed.


    a. Yes
    b. No

    23- Climbing or standing on equipment piping valves or unstable surface is approved.


    a. Yes
    b. No

    24- An approved specialized scaffold erector can build any type of scaffolds.
    a. Yes
    b. No

    25- While lifting a load it is necessary to extend out rigger of the crane fully.
    a. Yes
    b. No

    26- Is hot work or cold work permit is required with a confined space entry permit according to
    the job.
    a. Yes
    b. No
    27- Only strikers shall be used to light a torch, never light a torch with match or lighter.
    a. Yes
    b. No

    28- Acetylene cylinder in use shall have a handle valve wrench in place at all times.
    a. Yes
    b. No
    29- Shackles and other connecting devices shall be completely closed.
    a. Yes
    b. No

    30- Drivers shall report all vehicles collision and moving violation immediately no matter
    how miner.
    a. Yes
    b. No
    SECTION 3

    1- What is the colour of H2S?


    Colorless
    2- When is hearing protection needed?

    When the noise exceeds 85 dba

    3- What is Confined Space?

    An area which is small and enclosed or an area where one entry and exits or where a man
    cannot work comfortable in any location is caused confined space.

    4- What Are The Duties Of A Safety Officer?( Any 5 only)

    o Prepare tool box talk


    o Prepare monthly statistics
    o Prepare the checklist
    o Accident reports
    o Management meetings
    o Arrange the safety classes/training
    o Arrange monthly safety bulletin
    o Inspection of fire extinguisher
    o Arrange first aid training classes
    o Arrange safety competitions like quiz, slogan, poster competitions exhibition etc.

    5- What Are the Pre Cautions For Welding? ( Any 5 only)


    o Remove all combustion material from the place of welding
    o Clear the work area and cover wooden floor with fire proof mats.
    o All welding cables should be fully insulted
    o Welding area should be dry and free from water
    o Keep the fire extinguisher
    o Fire watch should be available

    You might also like