Tognella Valve

GB-TognellaxCD 20/08/2001 11:55 Pagina 1
INTRODUCTION
VALVES INDEX
FIT IN WINDOW
LAST VIEW F.LLI TOGNELLA S.p.A.

HYDRAULICS AND NUMATICS COMPONENTS
PRINT
QUIT
HOME
INTRODUCTION
VALVES INDEX
FIT IN WINDOW
Drawings and text

TECNOVI
casorate sempione
LAST VIEW Graphic design
GPI
somma lombardo
Photographic office
FRANCO GARBIN
gallarate
Coordinator
PRINT Gianfranco Cattoretti
casorate sempione
QUIT
HOME
INTRODUCTION
VALVES INDEX
The F.lli Tognella SpA

owns the copyright of
the graphic elements of
this catalogue, namely:
the logo of the Company,
the trade-mark, the code
of the items, the drawings,
the graphic design of the
catalogue; it reserves the
right to prevent, by recourse
FIT IN WINDOW to law, any unfair use
of them if not expressly
authorized.
Our technical data,
descriptions and drawings
are reported with
LAST VIEW theutmost accuracy,
however they should be
understood as indicative
and we reserve the right
to introduce modifications
at any time.
PRINT
QUIT
SO WE It was 1957 when Vittorino and Dorino Tognella decided to set up the “F.lli Tognella
MAY S.d.f.”, after years of experience acquired in a well-known local firm which
BE BETTER operated in the aeronautics field. In creating this new company they invested
KNOWN
their skills in the most sophisticated mechanical concepts, their knowledge
of the variegated problematics of the economic and productive field, their
entrepreneurial spirit, will power, determination, technique and a great technical
experience. They started mainly as sub-suppliers to firms operating
in the pneumatics field.
Then they gradually made a place for themselves in the hydraulic field which
became, through a winning choice, the predominant sector of their activity.
HOME
VALVES INDEX
FIT IN WINDOW
LAST VIEW
PRINT
QUIT
“TECHNOLOGY IS FIRMLY ROOTED IN THE PAST,

DOMINATES THE PRESENT AND IS PROJECTED
TOWARDS THE FUTURE”
“To offer quality products at the right price”: it was not an easy-to win chal-
lenge, the one “F.lli Tognella” wanted to try. But even in the competition with
international colossuses, their precision, firmness, well-balanced administra-
tion and a complete reinvestment of the returns rapidly transformed this firm
into a protagonist of the market. Never much influenced by the rapid chan-
ges this sector has usually undergone, being always able instead to forward
the requirements of its clientele, day after day the firm grew and in the
Seventies it gained widespread consensus all over the world. The circulation
of “F.lli Tognella” products has by now reached a worldwide scale, being pre-
sent in over 35 countries and in various industrial, commercial and service-
HOME
sectors: from the field of mechanics to that of machine tools, earthwork,
agriculture, plastics, marble working, material handling, wood working and
many else... The success achieved does not however represent for the com-
pany a final point, but it is rather considered as an element of endless evo-
VALVES INDEX
lution that leads to new ways and ideas, new products and projects in har-
mony with the most advanced technologies.
FIT IN WINDOW
LAST VIEW
PRINT
QUIT
NOT JUST A
CATALOGUE
t is a modern-style publication which we consider more than a simple catalogue.
Therein are described, specific data of each product, as well as the technical data necessary for a
correct choice of the various components depending on the different applications that they are
intended for. It is composed of various chapters according to the different valve types and the ini-
tial index allows for rapid consultation. The intention was to provide the catalogue with a dual pur-
pose: technical and advertising so as to be a valid means of consultation as much for the techni-
cal offices, as for the users and the distributors who will find satisfaction to their obviously different
requirements. We would be sincerely grateful to all those who would kindly like to pass on to us any
criticism, suggestions, advice or whatever else might be useful to the improvement of this publi-
cation with the aim of making it apt to find the appreciation of our clientele.
HOME
A
STRUCTURE
INTRODUCTION
The “F.lli Tognella”, attentive and sensitive to changes, to different

demands and to an ever more arduous competition, convinced of
VALVES INDEX the necessity of being able to offer its clientele a 360° structure
capable of satisfying the fickle and ever more varied demands from
its clientele, has recently created a parallel structure to the “F.lli
Tognella” denominated “Special Service Seprio” which deals with the
production of “special” components.
By “special” one means “made according to customer’s require-
ments”, or modifying a standard-built item or producing ex-novo,
starting from none less than the drawing board.
The Special Service Seprio has the opportunity to work with these
FIT IN WINDOW modalities for it holds a share partnership of our external technical
office. A Technical Office conceived according to the most modern
technologies provided with CAD CAM stations and disposing of
LAST VIEW highly-experienced professionals in the mechanical sector as well as
in that of oleo-hydro-pneumatics. Therefore, the Special Service
Seprio is able to offer projects, prototypes and finished products
according to the requirements of the customer.
PRINT
QUIT
Forty years and over, but it doesn’t show

Forty years of efficiency, of dynamic activity, flexibility and
courtesy, at the service of our clientele.
For over forty years we have been making valves which have not gone
unnoticed. That which has always characterised the “F.lli Tognella” has
been its originality, essentiality, reliability: in other words, the quality of
our products. The latter has always proceeded hand-in-hand with an
intense productive activity always keeping market requirements well in
mind, continuously trying out new directions, developing products able
to satisfy customer demands and expectations.
Proof of all this is the additional contribution which the second genera-
tion of the entrepreneurial Tognella family has provided to the develop-
ment of the firm. The new company site has in fact been recently built
HOME on an area of over 3.500 sq. m, with practically, total replacement of
all machinery and with the introduction of automated systems and
equipment (the most updated assembly and monitoring systems).
These are all factors which project the firm into the new millennium
INTRODUCTION with all the requirements indispensable to achieve future business
success and not to be carried along in the wake of events but to
have the determination to direct them.
VALVES INDEX
“Thousands and thousands of individuals produce and save despite all that BY LUIGI
we invest to molest, shackle and discourage them. EINAUDI
They are driven by a natural vocation: not just by the desire for money.
The pleasure, the pride in seeing one’s own firm prospering, acquiring credit,
inspiring trust in an ever increasing clientele, extending the plants, embellishing
FIT IN WINDOW he head offices, all these constitute a propulsion to progress as powerful
as financial gain. Were it not so, how could one explain the existence
of entrepreneurs who put all their energy into their firm and invest all their capital
LAST VIEW only to have a return often far more modest than that which could undoubtedly
be obtained much more easily if they were otherwise employed.”
PRINT
QUIT
Indici 22/08/2001 10:39 Pagina 2
INDEX
Double-acting needle control valves Cartridge mounted pressure compensated Pressure compensated flow Single-acting needle control valves
FT 257/2 FT 287/2 FT 289/2 FT 1254/5
in line flow control needle valves control needle valves manifold mounted 90° angle
PAGE 10 PAGE 42 PAGE 67 PAGE 82
Double-acting needle control valves Pressure compensated cartridge Single-acting pressure compensated flow Double-acting fine control needle valves
FT 258/2 FT 297/2 FT 289/5 FT 1237/2
90° angle mounted fine control needle valves control needle valves manifold mounted in line
Single-acting needle control valves Pressure compensated flow control Key lockable handles for Single-acting fine control needle valves
FT 257/5 FT 270/2 FT 288/2 - FT 288/5 FT 1237/5
in line needle valves in line
FT 289/2 - FT 289/5
Check valves Single acting pressure compensated flow Two-way Double-acting fine control needle valves
FT 257/6 control needle valves ball valves
FT 1247/2
in line FT 270/5 FT 221/1 cartridge mounted
Check valves (ball) Flow control needle valves Three-way Gauge isolator needle-valves
FT 260/6 FT 280/2 ball valves
FT 290
in line manifold mounted FT 221/3 in line
Double-acting Microfine needle control valves Flow control needle valves Double-acting needle control valves Gauge isolator needle-valves
HOME FT 247/2 FT 280/5 FT 1251/2-01 FT 291
cartridge mounted manifold mounted in line - female/female 90° angle
Double-acting needle control valves Check valves Double-acting needle control valves Gauge isolator push button-valves
INTRODUCTION FT 267/2 FT 280/6 FT 1251/2-02 FT 292
cartridge mounted manifold mounted in line - male/female
Needle control valves Fine control needle valves Double-acting needle control valves Gauge isolator push button-valves
FT 267/5 FT 281/2 FT 1252/2-01 FT 293
cartridge mounted manifold mounted 90° angle - female/female manifold mounted
Cheek valves Single-acting fine control needle valves Double-acting needle control valves Pressure gauge swivel adaptors
FT 267/6 FT 281/5 FT 1252/2-02 FT 299
cartridge mounted manifold mounted 90° angle - male/female
FIT IN WINDOW PAGE 28 PAGE 63 PAGE 79 PAGE 103
Needle valves Pressure compensated fine control needle valves Single-acting needle control valves Gauge copper washers
FT 277/2 FT 288/2 FT 1251/5-01 FT 1201
LAST VIEW (in line) manifold mounted in line - female/female
Single-acting pressure compensated Single-acting pressure compensated Single-acting needle control valves
CALCULATION
FT 277/5 FT 288/5 FT 1253/5 FORMULAS
flow control needle valves (in line) fine control needle valves manifold mounted in line
PRINT
QUIT
HYDRAULIC VALVES
CODING
LOGIC
FT1251 / 2 - 02 - 18 - G - V - T- mp
VALVE
CODE
HOME
FUNCTION 2 = Double-acting needle control

5 = Single-acting needle control
CODE 6 = Check valves
INTRODUCTION
CONNECTION 01 = Female/Female
02 = Male/Female
CODE 04 = Connection to rigid pipes DIN 2353
VALVES INDEX 05 = Connection to flexible pipes DIN 3861
TYPE 18 = 1/8”
14 = _”
GAS
GAS
(BSP)
(BSP)
CODE 38 = 3/8” GAS (BSP)
12 = _” GAS (BSP)
34 = _” GAS (BSP)
100 = 1” GAS (BSP)
114 = 1 _” GAS (BSP)
112 = 1 _” GAS (BSP)
200 = 2” GAS (BSP)
FIT IN WINDOW
OPTIONAL G = Panel mounting kit

V = Viton seal
LAST VIEW
FITTINGS T = Plate
CODE mp = Handwheel in ABS plastic
PRINT
QUIT
IN LINE NEEDLE VALVES

CHECK VALVES
IN CARBON STEEL
FT 257/2
FT 258/2
FT 257/5
FT 257/6
FT 260/6
HOME
INTRODUCTION
VALVES INDEX
FIT IN WINDOW
LAST VIEW
PRINT
QUIT
FT 257/2
VALVES CHECK
IN LINE NEEDLE
In line double-acting flow control On request
VALVES IN CARBON
STEEL
• Versions in AISI 316 stainless steel code FT 2257/2
and shut-off control needle valves
• Viton seals (V)
• NPT threads
They allow flow control in both directions. Needle adjust-
• Complete with panel mounting nut (G)
ments give:
• Handwheel in ABS (mp) - plastic
• full shut off (via metal seat);
• accurate control for a wide range of flowrates.
The valve has a graduated adjustement scale below the
handle to indicate accurately the valve position.
There is a locking screw in the handle to allow the handle
to be fixed. (Preventing accidental adjustement or
movement due to vibration).
A panel mounting nut (G) can be supplied on request.
MATERIALS Body 9 s Mn Pb 23 - UNI 5105

Needle 1 C 40 - UNI 8373
Or Nitrile
Antiextrusion ring PTFE
Handwheel GD - Al Si 12 - UNI 5706 aluminium
Handwheel (mp) ABS - plastic
HOME EXAMPLE FOR Accessories on request

ORDERING Code Type Panel Viton Handwheel
ring seal in plastic
Steel FT 257/2 18 G V mp
Stainl. steel FT 2257/2 38 G – mp

INTRODUCTION
Versione 200
VALVES INDEX
CODE Type A B C D E F F1 G H CH Weight kg

FT 257/2 UNI 338
18 1/8”G 8.5 38 59 64 22 40 13.5 M17x1 16 0.110
14 1/4”G 12.5 49 71 78 27 50 17 M20x1 20 0.200

FIT IN WINDOW
38 3/8”G 12.5 59 84 93 33 70 19.5 M25x1.5 25 0.375
12 1/2”G 15.5 68 97 107 38 80 21 M30x1.5 30 0.600
34 3/4”G 17 86 120.5 132.5 47 100 26.5 M40x1.5 40 1.250

LAST VIEW
100 1”G 20 105 151.5 167.5 58 120 35 M50x1.5 50 2.550
114 1 1/4”G 22 120 156.5 172.5 58 120 35 M50x1.5 55 3.000
112 1 1/2”G 24 134 167 181 58 120 35 M55x2 65 4.217
200 2”G 27 150 188 202 85 / 44 M65x2 75 7.300

PRINT
Note: Instructions for panel mounting on page 17
10
QUIT
FT 258/2
90° angle double-acting shut-off On request
IN LINE NEEDLE
VALVES CHECK
VALVES IN CARBON
STEEL
• Versions in AISI 316 stainless steel code FT 2258/2
control valves
• Viton seals (V)
• NPT threads
They allow flow control in both directions. Needle adjust- • Complete with panel mounting nut (G)
ments give: • Handwheel in ABS (mp) - plastic
• full shut off (via metal seat)
There is a locking screw in the handle to allow the handle
to be fixed. (Preventing accidental adjustement or move-
ment due to vibration).
A panel mounting nut (G) can be supplied on request.
HOME
Accessories on request EXAMPLE
Code Type Panel Viton Handwheel
FOR
ring seal in plastic ORDERING
Steel FT 258/2 G V mp
Stainl. steel FT 2258/2 12 G – mp

INTRODUCTION
Body 9 s Mn Pb 23 - UNI 5105 MATERIALS
Or Nitrile
Handwheel GD - Al Si 12
UNI 5706 aluminium
VALVES INDEX Handwheel (mp) ABS - plastic
Type A B C C1 D E F F1 G H CH Weight kg CODE

UNI 338 FT 258/2
18 1/8”G 8.5 19 20 71 76 22 40 14.5 M17x1 16 0.108

FIT IN WINDOW
14 1/4”G 13.5 25 27 86.5 93.5 27 50 17 M20x1 20 0.200
38 3/8”G 12.5 29.5 31.5 101.5 110.5 33 70 19.5 M25x1.5 25 0.360
12 1/2”G 15.5 35 37 117 127 38 80 21 M30x1.5 30 0.580

LAST VIEW
34 3/4”G 17 42 46 142.5 154.5 47 100 26.5 M40x1.5 40 1.265
100 1”G 20 53 56 182.8 198.8 58 120 35 M50x1.5 50 2.500
PRINT
11
QUIT
FT 257/2 - 258/2
TECHNICAL Type Port section Working Min. burst. Working Filtration
DATA sq. cm pressure bar pressure bar temp. °C grade µm
18 0.12 400 1600 -20°/+100° 25
14 0.19 400 1600 -20°/+100° 25
38 0.39 400 1600 -20°/+100° 25
12 0.68 400 1600 -20°/+100° 25
34 1.13 400 1600 -20°/+100° 25
100 2.09 320 1300 -20°/+100° 25
114 2.09 320 1300 -20°/+100° 25
112 3.14 320 1300 -20°/+100° 25
200 4.91 320 1300 -20°/+100° 25
HOME
FLOWRATE
CURVES
INTRODUCTION
VALVES INDEX
FT 257/2-FT 258/2-18 FT 257/2-FT 258/2-14
FIT IN WINDOW
LAST VIEW
PRINT FT 257/2-FT 258/2-38
12
QUIT
FT 257/2 - 258/2
FT 257/2-FT 258/2-12 FT 257/2-FT 258/2-34
HOME
FT 257/2-100
INTRODUCTION
VALVES INDEX
FT 257/2-114 FT 257/2-112
FIT IN WINDOW
LAST VIEW
PRINT FT 257/2-200
13
QUIT
FT 257/5
VALVES CHECK
STEEL
Single-acting control needle valves A panel mounting nut (G) can be supplied on request.
IN LINE NEEDLE
VALVES IN CARBON
Opening pressure is 0.35 bar.
in line
On request
Their function is to control and eventually shut-off the flow • Versions in AISI 316 stainless steel code FT 2257/5
in one direction, allowing a free return flow in the opposite • Viton seals (V)
direction. • NPT threads
The check valve spring is housed in such a way that it does • Complete with panel mounting nut (G)
not close as a pack during opening of the scheck valve • Handwheel in ABS (mp) - plastic
poppet.
Needle adjustments give:
• full shut off (via metal seat);
There is a locking screw in the handle to allow the handle to
be fixed. (Preventing accidental adjustement or movement
due to vibration).
MATERIALS Body 9 s Mn Pb 23 - UNI 5105

Or Nitrile
Check Valve 38 Ni Cr Mo 4 - UNI - EN 10083
Spring C 72 UNI 3545
Threaded end-plate 35 S Mn Pb 10 - UNI 5105
HOME
INTRODUCTION
VALVES INDEX
EXAMPLE Accessories on request
FOR Code Type Panel Viton Handwheel
ORDERING ring seal in plastic
Steel FT 257/5 18 G V mp
Stainl. steel FT 2257/5 34 G V mp
CODE Type A B C D E F F1 G H CH Weight kg

UNI 338
FT 257/5
18 1/8”G 8.5 50 59 64 22 40 13.5 M17x1 16 0.130
14 1/4”G 12.5 66 71 78 27 50 17 M20x1 20 0.250

FIT IN WINDOW
38 3/8”G 12.5 79 84 93 33 70 19.5 M25x1.5 25 0.500
12 1/2”G 15.5 94.5 97 107 38 80 21 M30x1.5 30 0.750
34 3/4”G 17 115 120.5 132.5 47 100 26.5 M40x1.5 40 1.600

LAST VIEW
100 1”G 20 138.5 151.5 167.5 58 120 35 M50x1.5 50 3.050
114 1 1/4”G 22 157 156.5 172.5 58 120 35 M50x1.5 55 3.750
112 1 1/2”G 24 190 167 181 58 120 35 M55x2 65 5.760
200 2”G 27 228 188 202 85 – 44 M65x2 75 10.000

PRINT
14
QUIT
FT 257/5
Type Port section Working Min. Burst. Working Filtration grade TECHNICAL
sq. cm pressure bar pressure bar temperature °C µm DATA
18 0.12 400 1600 -20°/+100° 25
14 0.19 400 1600 -20°/+100° 25
38 0.39 400 1600 -20°/+100° 25
12 0.68 400 1600 -20°/+100° 25
34 1.13 400 1600 -20°/+100° 25
100 2.09 320 1300 -20°/+100° 25
114 2.09 320 1300 -20°/+100° 25
112 3.14 320 1300 -20°/+100° 25
200 4.91 320 1300 -20°/+100° 25
Versione 200
HOME
FLOWRATE
CURVES
INTRODUCTION
VALVES INDEX
FT 257/5
FIT IN WINDOW
LAST VIEW
PRINT FT 257/5-18 FT 257/5-14
15
QUIT
FT 257/5
FT 257/5-38
HOME
FT 257/5-12 FT 257/5-34
INTRODUCTION
VALVES INDEX
FT 257/5-100 FT 257/5-114
FIT IN WINDOW
LAST VIEW
PRINT FT 257/5-112 FT 257/5-200
16
QUIT
SERIE FT 257 - FT 258

DISASSEMBLY
INSTRUCTIONS
TO FIT PANEL
MOUNT NUT
Montaggio a pannello
1
1° Allentare il grano di pressione (4)
2
2° Togliere il tappo (1)
3° Svitare la vite (2)

3
4° Estrarre con forza la manopola (3)
5° Introdurre la ghiera KM (9) indicata 4

HOME
nella tabella (a richiesta viene fornita
con la valvola)
5
6
9
7
INTRODUCTION
A
8
VALVES INDEX
Seal and lock nut spare parts
Type 18 14 38 12 34 100 114 112 200

FIT IN WINDOW
(7) OR 2018 2021 108 2043 115 123 123 128 3106
(6) Antiextrusion ring 2018 2021 108 2043 115 123 123 128 3106
(9) Lock nut KM KM 3 KM 4 KM 5 KM 6 KM 8 KM 10 KM 10 KM 11 KM 13

LAST VIEW (FT 202/3) (FT 202/4) (FT 202/5) (FT 202/6) (FT 202/8) (FT 202/10) (FT 202/10)
A max thickness 6 8 10 10 10 10 10 12 12
B bore for panel mount. 18 21 26 31 41 51 51 56 66
PRINT
17
QUIT
FT 257/6
VALVES CHECK
IN LINE NEEDLE
VALVES IN CARBON
STEEL
Check valve with machined
cone poppet
The valve has a metal to metal seat incorporating a high
quality machined cone/spool with hardened tip.
They may be supplied with various springs
(0.35 standard, optional 2-4-6-8-10 bar).
On request
• Version AISI 316 stainless steel code FT 2257/6
• NPT threads
MATERIALS Body 9 S Mn Pb 23 - UNI 5105

Check valve 38 Ni Cr Mo 4
UNI - EN 10083
Spring C 72 UNI 3545
Threaded end-plate 35 S Mn Pb 10 - UNI 5105
HOME
EXAMPLE Code Type Calibration

INTRODUCTION FOR Steel FT 257/6 14 –
ORDERING
Stainl. steel FT 2257/6 12 –
Steel FT 257/6/8 34 8
VALVES INDEX
CODE Type A B C CH Working Weight kg

FT 257/6 UNI 338 pressure bar
18 1/8”G 8.5 46 17 400 0.075
FIT IN WINDOW 14 1/4”G 12.5 63 22 400 0.165
38 3/8”G 12.5 69 27 400 0.260
12 1/2”G 15.5 80.5 32 400 0.415
LAST VIEW 34 3/4”G 17 99.5 36 400 0.605
100 1”G 20 117 46 320 1.170
114 11/4”G 22 134.5 55 320 1.850
112 1 1/2”G 24 159 65 320 3.130

PRINT
200 2”G 27 198 75 320 4.900
18
QUIT
FT 257/6
FLOWRATE
CURVES
FT 257/6-18
HOME
FT 257/6-14
INTRODUCTION
VALVES INDEX
FT 257/6-38 FT 257/6-12
FIT IN WINDOW
LAST VIEW
PRINT
FT 257/6-34
19
QUIT
FT 257/6
FLOWRATE
CURVES
FT 257/6-100
HOME
FT 257/6-114
INTRODUCTION
VALVES INDEX
FT 257/6-112 FT 257/6-200
FIT IN WINDOW
LAST VIEW
PRINT
20
QUIT
FT 260/6
Ball type check valves
These check valves have a guided ball giving a metal to
metal seat.
They may be supplied with two springs
(0.35 standard and 4.5 bar).
They are used for working pressures up to 350 bar.
On request
• Version AISI 316 stainless steel code FT 2260/6
Body 9 S Mn Pb 23 - UNI 5105 MATERIALS

Spring AISI 302
Ball UNI 100 C 6
Ball guide Nylon 66 + carbon fibre
HOME
INTRODUCTION
Code Type EXAMPLE
Steel FT 260/6 14
FOR
ORDERING
Stainl. steel FT 2260/6 12
VALVES INDEX
CODE
FT 260/6
Type A B C CH Working Weight kg
UNI 338 pressure bar
FIT IN WINDOW 18 1/8”G 8.5 41 16 350 0.054
14 1/4”G 12.5 54 19 350 0.089
38 3/8”G 13 65 24 350 0.175

LAST VIEW 12 1/2”G 16 77 30 350 0.310
34 3/4”G 20 88 36 350 0.450
100 1”G 23 108.5 46 320 0.965
PRINT
21
QUIT
FT 260/6
FLOWRATE
CURVES
FT 260/6-18
HOME
FT 260/6-14 FT 260/6-38
INTRODUCTION
VALVES INDEX
FT 260/6-12 FT 260/6-34
FIT IN WINDOW
LAST VIEW
PRINT
FT 260/6-100
22
QUIT
CARTRIDGE MOUNTED
SHUT-OFF AND CONTROL
NEEDLE VALVES
FT 247/2
FT 267/2
FT 267/5
FT 267/6
HOME
INTRODUCTION
VALVES INDEX
FIT IN WINDOW
LAST VIEW
PRINT
23
QUIT
CARTRIDGE
MOUNTED
SHUT-OFF AND
CONTROL NEEDLE
VALVES
FT 247/2 They are manufactured in the four versions:
FT 267/2 FT 247/2 for fine control

FT 267/5 FT 267/2 double-acting control valves
FT 267/6 FT 267/5 single-acting control valves
FT 267/6 check valves
Sealing between valves and connections surface is obtained either with the normal toroidal ‘O’ ring or
HOME with a Bonded Dowty seal.
On pages 32, 33, 34, 35 are indicated the machining schemes for the realtive embedding seat.
The exclusive system designed for the realization of type FT 267/5, which includes the non-return devi-
ce in the cartridge itself, avoids to the user costly machinings for the realization of specific seats suita-
ble to receive separately the cut-off valve.
The accurate surface finishe of the moving and sealing organs, the high quality standard and the
INTRODUCTION efficient protective treatments bring about an almost unlimited service-life, even in the most
severe working conditions.
Moreover they kept the essential prerogatives of series FT 257 i.e.:

• semplicity to set-up and reset the flow values;
• efficient metallic sealing;
VALVES INDEX • absolute safety against needle withdrawal;
• stability of positioning.
FIT IN WINDOW
LAST VIEW
PRINT
24
QUIT
FT 247/2
Fine control double-acting valves for
VALVES
CARTRIDGE
MOUNTED
SHUT-OFF AND
CONTROL NEEDLE
Kit of seals on the seat
cartridge mounting
Type (1) OR (2) BK
This version is similar to the series FT 257, the following
characteristics are maintained: 18 108 BK 18 (FT)
• metallic sealing;
• safety against needle withdrawal. Kit of seals on the needle
On request Type OR BK
• They are provided with seals in viton (V)
18 2018 2018
Body 95 Mn Pb 28 - UNI 5105 MATERIALS

Needle AISI 303
Or Nitrile
HOME
INTRODUCTION
VALVES INDEX

Code Type Viton seal
FOR
ORDERING
FT 247/2 18 V
Type A nB C nD E F G Es. Weight kg CODE

UNI 4534 FT 247/2
FIT IN WINDOW 18 M15x1 12 20.5 22 34.5 55 8 22 0.069
LAST VIEW
PRINT
25
QUIT
FT 267/2
CARTRIDGE
MOUNTED
SHUT-OFF AND
Double-acting needle control
CONTROL NEEDLE
VALVES
valves for cartridge mounting
Flow control in both directions.
On request
• AISI version 316 stainless steel code FT 2267/2
• They are provided with seals in Viton (V)
• Handwheel in ABS-plastic
MATERIALS Body 9 S Mn Pb 23 - UNI 5105 Kit of seals for seat

Or Nitrile Type (1) OR (2) BK
Handwheel GD - Al Si 12 - UNI 5706 aluminium 18 108 108
Handwheel (mp) ABS - plastic 14 2043 2043
38 2050 2050
12 2062 2062
34 130 130
100 3118 3118
HOME
Kit of seals for needle
Type OR BK
18 2018 2018
14 2021 2021
INTRODUCTION 38 108 108
12 2043 2043
34 115 115
100 123 123
VALVES INDEX

FOR Code Type Viton Plastic
ORDERING seal handwheel
Steel FT 267/2 38 V mp
Stainl. Steel FT 2267/2 12 – mp
CODE Type A B C D E F F1 G H L CH Weight kg

FT 267/2 UNI 4534
FIT IN WINDOW 18 M15x1 12 9.3 11.2 20.5 22 40 35 55.5 5 22 0.064
14 M20x1.5 14 11 15.5 26.5 27 50 42.5 68.5 7 27 0.125
38 M20x1.5 16 13 17.5 30.5 33 70 48.5 78.5 9 27 0.180

LAST VIEW 12 M27x2 19 15.5 24.5 40 38 80 56 96 10.5 32 0.305
34 M33x2 27 18 26 44 47 100 63.5 109 13 41 0.580
100 M42x2 35 21 31.5 52.5 58 120 82 134.5 20 50 1.185
PRINT
26
QUIT
FT 267/5
Single-acting needle control valves for
MOUNTED SHUT-OFF
NEEDLE VALVES
CARTRIDGE
AND CONTROL
Kit of seals for seat
cartridge mounting
Type (1) OR (2) BK speciale
14 2050 BK 14 (FT)
They control and eventually shut-off the flow in one
38 2062 BK 38 (FT)
direction, allowing a free return in the opposed direction.
12 130 BK 12 (FT)
Non-return valve set at 0.35 bar.
34 3118 BK 34 (FT)
100 3156 3156
On request
Kit of seals for needle
• They are provided with Viton seals (V)
• Handwheel in ABS plastic
Type OR Anello
antiestrusione
14 2012 200-801
38 2018 2018
12 106 106
34 108 108
100 112 112
Needle 38 Ni Cr Mo 4 - UNI - EN 10083
Or Nitrile
Check valve 38 Ni Cr Mo 4 - UNI - EN 10083
Spring C 72 - UNI 3545
HOME
EXAMPLE
FOR
ORDERING
INTRODUCTION
Accessories on request
Code Type Viton Handwheel

seal in plastic
Steel FT 267/5 34 V mp
VALVES INDEX
Stainl. Steel FT 2267/5 12 – mp
Type A B E F F1 G H L CH Weight kg CODE

UNI 4534 FT 267/5
FIT IN WINDOW 14 M20x1.5 16 30.5 27 50 43 73.5 4 27 0.130
38 M27x2 19 40 33 49 70 89 6 32 0.250
12 M33x2 27 44.5 38 60 80 104.5 7 41 0.340

LAST VIEW 34 M42x2 35 52.5 47 70 100 112.5 8 50 0.620
100 M52x2 45 64.5 58 120 85 149.5 12 60 1.632
PRINT
27
QUIT
FT 267/6
Cartridge mounted check valves
CARTRIDGE
MOUNTED SHUT-OFF
AND CONTROL
NEEDLE VALVES
Allow a free flow in one direction and block passage in the
opposed direction.
Opening pressure is 0.35 bar,
on request 2, 4, 6, 8, 10 bar.
On request
• They are provided with Viton seals (V)

Check valve 38 Ni Cr Mo 4 UNI - EN 10083
Spring C 72 - UNI 3545
Screw plug 9 S Mn Pb 23 - UNI 5105
HOME
INTRODUCTION
EXAMPLE Accessorie on request
FOR Code Type Viton seal
ORDERING
Steel FT 267/6 14 V
VALVES INDEX Stainl. steel FT 2267/6 12 –
CODE Type A B C H CH OR 1 OR 2 Weight kg

FT 267/6 UNI 4534
FIT IN WINDOW 14 M22x1.5 19 9.5 49 8 3056 115 0.80
38 M27x2 24 10.5 56 10 3075 3068 0.140
12 M33x2 29 13 67 10 3093 3087 0.265

LAST VIEW 34 M42x2 38 17 80.5 12 4125 4112 0.545
PRINT
28
QUIT
FT 247/2
Type Max. working Min. burst. Port Working Filtration TECHNICAL

pressure
bar
pressure
bar
section
sq. cm
temp.
°C
grade
µm
DATA
18 320 1300 0.0314 -20°/+100° 25
HOME
INTRODUCTION
FLOWRATE
CURVES
VALVES INDEX
FT 247/2-18
FIT IN WINDOW
LAST VIEW
PRINT
29
QUIT
FT 267/2
TECHNICAL Type Port section Working Min. burst. Working Filtration grade
DATA sq. cm pressure bar pressure bar temperature °C µm
18 0.12 320 1300 -20°/+100° 25
14 0.19 320 1300 -20°/+100° 25
38 0.39 320 1300 -20°/+100° 25
12 0.68 320 1300 -20°/+100° 25
34 1.13 320 1300 -20°/+100° 25
100 2.09 320 1300 -20°/+100° 25
FLOWRATE
CURVES
HOME
FT 267/2-18 FT 267/2-14
INTRODUCTION
VALVES INDEX
FT 267/2-38 FT 267/2-12
FIT IN WINDOW
LAST VIEW
PRINT
FT 267/2-34 FT 267/2-100
30
QUIT
FT 267/5
Type Port section Working Min. burst. Working Filtration grade TECHNICAL
sq. cm pressure bar pressure bar temperature °C µm DATA
14 0.07 320 1300 -20°/+100° 25
38 0.15 320 1300 -20°/+100° 25
12 0.37 320 1300 -20°/+100° 25
34 1.56 320 1300 -20°/+100° 25
100 3.80 320 1300 -20°/+100° 25
FLOWRATE
CURVES
HOME
FT 267/5 FT 267/5-14
INTRODUCTION
VALVES INDEX
FT 267/5-38 FT 267/5-12
FIT IN WINDOW
LAST VIEW
PRINT
FT 267/5-34 FT 267/5-100
31
QUIT
FT 267/6
TECHNICAL Type Working Min. burst. Working Filtration
DATA pressure bar pressure bar temperature °C grade µm
14 320 1300 -20°/+100° 25
38 320 1300 -20°/+100° 25
12 320 1300 -20°/+100° 25
34 320 1300 -20°/+100° 25
FLOWRATE
CURVES
FT 267/6
HOME
FOR VALVE
SCHEMES FOR
CAVITY MACHINING
INTRODUCTION
VALVES INDEX
DIMENSIONS Type A B C D E F G H K L
TABLE FOR UNI 4534 min. max.
FIT IN WINDOW CAVITY 14 M22x1.5 20.5 16.5 13.5 19 45.5 10 52 8 33.5 36
38 M27x2 25 18 16 24 52.5 15 59 10 36.5 40
12 M33x2 31 21 17 29 63.5 20 71 12 45 49
LAST VIEW 34 M42x2 40 25 20 38 76 26 85.5 15 52 59
PRINT
32
QUIT
FT 247/2-FT 267/2-FT 267/5

Sealing
MOUNTED VALVES
SCHEMES FOR
CAVITY MACHINING FOR
CARTRIDGE
achieved by
Or seals
on flat seat
HOME
Detail of machining which may
be executed in alternative
to the conical one,
eliminating dimension E1
INTRODUCTION
Flat seat for O-Ring seal FT 247/2 - 267/2
Type A nB C D E E1 F nG H nL M Sm OR
UNI 4534
18 23 19 2 M15x1 14 13 11 12 21.5 4 11.5 0.5 3056

VALVES INDEX
14 28 24 2 M20x1.5 17.5 16.5 13.5 14 28.5 5 14.5 1 3075
38 28 24 2 M20x1.5 21 20.5 13.5 16 33.5 8 16.2 1.2 3075
12 34 30 2 M27x2 30 28.5 20 19 43 10 24 1.2 3100
34 43 36 2 M33x2 32.5 32 20 27 47.5 13 25 1.2 3125
100 60 45 2 M42x2 38.5 37 23.5 35 57 16 30.5 1.5 3162
Flat seat for O-Ring seal FT 267/5
Type A nB C D E E1 F nG H nL M Sm OR
FIT IN WINDOW UNI 4534
14 28 24 2 M20x1.5 21 20.5 13.5 16 33.5 8 16.2 1 3075
38 34 30 2 M27x2 30 28.5 20 19 43 10 24 1.2 3100

LAST VIEW 12 43 36 2 M33x2 32.5 32 20 27 47.5 12 25.5 1.2 3125
34 60 45 2 M42x2 38.5 37 23.5 35 57 16 30.5 1.5 3162
100 61 55 2.2 M52x2 46 45 27 45 67.5 20 34.5 1.5 3200
PRINT
33
QUIT
FT 247/2-FT 267/2-FT 267/5
MOUNTED VALVES
Sealing achieved
SCHEMES FOR
CAVITY MACHINING
FOR CARTRIDGE
by Bonded seal
Detail of machining which

HOME may be executed in
alternative to the conical one,
eliminating dimension E1
INTRODUCTION
Cavity Bonded seal – FT 247/2 - 267/2
Type A C D E E1 F nG H nL M Sm Bonded seal

UNI 4534
18 23 1 M15x1 13 12 9 12 20 4 10.3 0.5 400-512

VALVES INDEX
14 27 1 M20x1.5 16.5 15.5 12 14 27 5 13.3 1 400-513
38 27 1 M20x1.5 20 19.5 12 16 32 8 15.2 1.2 400-513
12 33 1.3 M27x2 28 26.5 18 19 41 10 22 1.2 400-520
34 40 1.3 M33x2 30.5 30 18 27 45.5 13 23 1.2 400-515
100 50 1.3 M42x2 36.5 35 21.5 35 55 16 28.5 1.5 400-516
Cavity Bonded seal – FT 267/5
Type A C D E E1 F nG H nL M Sm Bonded seal

14 27 1 M20x1.5 20 19.5 12 16 32 8 15.2 1 400-513
38 33 1.3 M27x2 28 26.5 18 19 41 10 22 1.2 400-520

LAST VIEW 12 40 1.3 M33x2 30.5 30 18 27 45.5 12 23 1.2 400-515
34 50 1.3 M42x2 36.5 35 21.5 35 55 16 28.5 1.5 400-516
PRINT
34
QUIT
FT 247/2-FT 267/2-FT 267/5

Sealing achieved
MOUNTED VALVES
SCHEMES FOR
CAVITY MACHINING FOR
CARTRIDGE
by Or seals on
conical cavity
HOME
INTRODUCTION
Conical cavity for O-ring – FT 247/2 - FT 267/2
Type A nB C D E F nG H ØL M nN Sm OR
UNI 4534
18 16.5 M15x1 0.25 14 13 11 12 21.5 4 11.5 23 0.5 2050

VALVES INDEX
14 22.3 M20x1.5 0.25 17.5 16.5 13.5 14 28.5 5 28 14.5 1 3068
38 22.3 M20x1.5 0.25 21 20.5 13.5 16 33.5 8 28 16.2 1.2 3068
12 29.1 M27x2 0.3 30 28.5 20 19 43 10 24 34 1.2 132
34 36 M33x2 0.3 32.5 32 20 27 47.5 13 25 43 1.2 4112
100 45 M42x2 0.3 38.5 37 23.5 35 57 16 30.5 60 1.5 4150
Conical cavity for O-ring – FT 267/5
Type A nB C D E F nG H nL M nN Sm OR
14 22.3 M20x1.5 0.25 21 20.5 13.5 16 33.5 8 28 16.2 1.2 3068
38 29.1 M27x2 0.3 30 28.5 20 19 43 10 24 34 1.2 132

LAST VIEW 12 36 M33x2 0.3 32.5 32 20 27 47.5 13 25 43 1.2 4112
34 45 M42x2 0.3 38.5 37 23.5 35 57 16 30.5 60 1.5 4150
100 55 M52x2 0.3 46 45 27 45 67.5 20 34.5 61 1.5 4187
PRINT
QUIT
HOME
INTRODUCTION
VALVES INDEX
FIT IN WINDOW
LAST VIEW
PRINT
QUIT
PRESSURE COMPENSATED
FLOW CONTROL VALVES
FT 277/2
FT 277/5
FT 287/2
FT 297/2
FT 270/2
FT 270/5
HOME
INTRODUCTION
VALVES INDEX
FIT IN WINDOW
LAST VIEW
PRINT
37
QUIT
FT 277/2
COMPENSATED
Two inlet flow control valves, pressure automatically throttled, designed to minimize the effect
PRESSURE
FLOW CONTROL
VALVES
of the flow hydromechanic forces on the total balan-
compensated and including high
ce of the moving element;
capacity single acting valve to allow • the accuracy of the machinings which enabled to cancel
the free flow in one direction. any hysteresis effect of mechanical origin;
• the original aesthetic feature, underlined by the particular
They include two necks in series: form of control handwheel;
• the first one with port section definable by an • the easiness to reset the flow value thanks to
external control; reference pointers.
• the second one with automatically variable section Moreover we believe important to underline the choice of
in relation with counterpressure variations on use. constructive solution fitting to the concept of “double valen-
The choice of the adjustable neck situated upstream is that ce”, according to which the central body, configurated as a
which best ensures the precision of the valve towards varia- threaded cartridge and insertable in the two different
tions of the fluid temperature. bodies at the base or directly in standard modular units,
Regarding the structure of the valve, the following points brings about the three marketed versions:
must be underlined • FT 277/2 two-way
• the rigorous symmetry of the internal components • FT 277/5 two-way with single-acting valve;
such as to impede umforeseen perturbations of the • FT 287/2 two-way with threaded cartridge.
static and dynamic balances; The solution enables the user to request the single modular
• the optimization of the arrangement of internal spring components to be assembled according to the application.
controlling the intervention of the automatic throttling,
with variable preload with throttling fixed setting, useful On request
to improve the behaviour at medium-high flowrates; • Complete with rings (G)
• the geometry of the passage accross which the flow is • Seals in Viton (V)
MATERIALS Base 9 S Mn Pb 23 - UNI 5105

Cartridge body 35 S Mn Pb 10 - UNI 5105
Compensation unit 38 Ni Cr Mo 4 - UNI - EN 10083
Or Nitrile
HOME Antiextrusion ring PTFE
Handweel GD - Al Si 12
UNI 5706 aluminium
EXAMPLE FOR
ORDERING
INTRODUCTION
Accessories on request
Code Type Panel ring Viton seal
FT 277/2 34 G V
VALVES INDEX
FIT IN WINDOW
CODE Type A B C D E F G H L CH Weight kg

UNI 338
FT 277/2
LAST VIEW 14 1/4”G 12.5 81 104.5 28 33 17 M30x1.5 4.5 40 1.000
38 3/8”G 12.5 100 127 32 38 27 M35x1.5 6 45 1.600
12 1/2”G 15.5 119 147.5 38 47 28.5 M40x1.5 6.5 55 2.800
34 3/4”G 17 142 180 45 58 35 M50x1.5 7.5 65 4.750

PRINT
38
QUIT
FT 277/2
Type Max. working Min. Working Filtration grade TECHNICAL
pressure working ∆p temperature µm absolute DATA
bar bar °C
14 320 7.5 -20°/+70° 25
38 320 10 -20°/+70° 25
12 320 12 -20°/+70° 25
34 320 15 -20°/+70° 25
FLOWRATE
CURVES
HOME
FT 277 FT 277-14
INTRODUCTION
VALVES INDEX
FT 277-12 FT 277-38
FIT IN WINDOW
LAST VIEW
PRINT
FT 277-34
39
QUIT
FT 277/5
COMPENSATED
Single-acting pressure compensated
PRESSURE
FLOW CONTROL
VALVES
flow control needle valves
Two inlet flow control valves, pressure compensated and
including high capacity single acting valve to allow the free
flow in one direction.
They include two necks in series:
• the first one with port section definable by an external
control;
• the second one with automatically variable section in
relation with counterpressure variations on use.
The choice of the adjustable neck situated upstream is that
which best ensures the precision of the valve towards
variations of the fluid temperature.
Regarding the structure of the valve, the following points
must be underlined
• the rigorous symmetry of the internal components such
as to impede umforeseen perturbations of the static and
dynamic balances; automatically throttled, designed to minimize the effect of
• the optimization of the arrangement of internal spring the flow hydromechanic forces on the total balance of the
controlling the intervention of the automatic throttling, moving element;
with variable preload with throttling fixed setting, useful to • the accuracy of the machinings which enabled to cancel
improve the behaviour at medium-high flowrates; any hysteresis effect of mechanical origin;
• the geometry of the passage accross which the flow is • the original aesthetic feature, underlined by the particular
form of control handwheel;
• the easiness to reset the flow value thanks to reference
MATERIALS Base 9 S Mn Pb 23 - UNI 5105 pointers.
Cartridge body 35 S Mn Pb 10 - UNI 5105 Moreover we believe important to underline the choice of
HOME Compensation unit 38 Ni Cr Mo 4 - UNI - EN 10083 constructive solution fitting to the concept of “double
Or Nitrile valence”, according to which the central body, configurated
Antiextrusion ring PTFE as a threaded cartridge and insertable in the two different
Handweel GD - Al Si 12 bodies at the base or directly in standard modular units,
UNI 5706 aluminium brings about the three marketed versions:
• FT 277/2 two-way;
• FT 277/5 two-way with single-acting valve;
• FT 287/2 with cartridge mounted.
INTRODUCTION The solution enables the user to request the single modular
components to be assembled according to the application.
On request
• Complete with rings (G)
• Seals in Viton (V)
VALVES INDEX

FT 277/5 UNI 338
FIT IN WINDOW 14 1/4”G 12.5 93.5 104.5 28 33 17 M30x1.5 4.5 40 1.100
38 3/8”G 12.5 112.5 127 32 38 27 M35x1.5 6 45 1.700
12 1/2”G 15.5 136 147.5 38 47 28.5 M40x1.5 6.5 55 2.950

LAST VIEW 34 3/4”G 17 163 180 45 58 35 M50x1.5 7.5 65 5.050
PRINT
40
QUIT
FT 277/5
FOR
ORDERING
FT 277/5 12 G V
Type Max. working Min.working Working Filtration grade TECHNICAL

pressure bar ∆p bar temperature °C µm absolute DATA
14 320 7.5 -20°/+70° 25
38 320 10 -20°/+70° 25
12 320 12 -20°/+70° 25
FLOWRATE
34 320 15 -20°/+70° 25 CURVES
HOME
FT 277/5 FT 277
INTRODUCTION
VALVES INDEX
FT 277-14 FT 277-12
FIT IN WINDOW
LAST VIEW
PRINT
FT 277-38 FT 277-34
41
QUIT
FT 287/2
COMPENSATED
Cartridge mounted pressure their quick transformation, or to store the single standard
PRESSURE
FLOW CONTROL
VALVES
components to assemble in the various types according to
compensated flow control valves
the need.
They are essentially composed of the central body of val-
On request
ves series FT 277/2 which may be screwed in units preset
by the user. The construction and functional characteristics
reflect exactly those described for the two inlet valves.
It is recommended to keep them in their protective wrap-
ping until the mounting, in order to avoid possible draw-
backs caused by eventual entry of particles into the delica-
te and essential parts for a good working.
On page 46 is proposed a machining scheme for the
embedding seat, which has to be observed to ensure the
necessary accuracy of the valve. The constructive system
allows the user, already provided with those versions, either
to request the two inlet base bodies only, so as to allow
MATERIALS Cartridge body 9 S Mn Pb 23 - UNI 5105

Or Nitrile
Handwheel GD - Al Si 12
UNI 5706 aluminium
HOME
INTRODUCTION
EXAMPLE Accessori a richiesta
ORDERING
FT 287/2 38 V
VALVES INDEX
CODE Type A B E G F H L CH OR 1 Weight kg

FT 287/2 UNI 4534
FIT IN WINDOW 14 M33x1.5 24 31 64.5 33 95.5 4.5 32 2081 0.350
38 M39x1.5 30 34.5 82 38 116.5 6 38 2106 0.580
12 M48x2 35 42 92.5 47 134.5 6.5 45 3118 0.960

LAST VIEW 34 M55x2 40 49 115 58 164 7.5 55 3137 1.700
PRINT
42
QUIT
FT 287/2
bar bar °C
14 320 7.5 -20°/+70° 25
38 320 10 -20°/+70° 25
12 320 12 -20°/+70° 25
34 320 15 -20°/+70° 25
FLOWRATE
CURVES
HOME
FT 287 FT 287-14
INTRODUCTION
VALVES INDEX
FT 287-12 FT 287-38
FIT IN WINDOW
LAST VIEW
PRINT
QUIT
FT 297/2
COMPENSATED
Fine control cartridge mounted On request
PRESSURE
VALVES
FLOW CONTROL
pressure compensated flow control
valves
Pressure compensated flowrate regulators, to insert in cur-
rent model modular units.
They are essentially composed of the central body of valves
series FT 287/2 which may be screwed in units preset by
the user. The construction and functionally characteristics
reflect exactly those described for the two inlet valves.
It is recommended to keep them in their protective wrap-
ping until the mounting, in order to avoid possible draw-
backs caused by eventual entry of particles into the delica-
te and essential parts for a good working.
On page 46 is proposed a machining scheme for the
embedding seat, which has to be observed to ensure the
necessary accuracy of the valve.
MATERIALS Cartridge body 9 S Mn Pb 23 - UNI 5105

Or Nitrile
HOME
INTRODUCTION
EXAMPLE
FOR
ORDERING Accessories on request
Code Type Viton seal

VALVES INDEX
FT 297/2 14 V
CODE Type A B E G F H L CH OR 1 Weight kg

FT 297/2 UNI 4534
FIT IN WINDOW 14 M33x1.5 24 31 64.5 33 95.5 4.5 32 2081 0.350
LAST VIEW
PRINT
44
QUIT
FT 297/2
bar bar °C
14 320 7.5 -20°/+70° 25
FLOWRATE
CURVES
HOME
FT 297/2-14
INTRODUCTION
VALVES INDEX
FT 297/2
FIT IN WINDOW
LAST VIEW
PRINT
475
QUIT
SERIE FT 277 - FT 287 - FT 297

DISASSEMBLY
INSTRUCTIONS
TO FIT PANEL
MOUNT NUT
1
5
6
9 7
W
8
HOME
Y
n
INTRODUCTION
FT 277/2 - FT 277/5 FT 287/2 - FT 297/2 - Machining schemes for seats
VALVES INDEX Panel mounting FT 277/2 - FT 277/5 Ring KM for panel mounting
1° Unscrew handle lock screw - item (4) Type 14 38 12 34
2° Remove cover plate - item (1) Ring KM KM 6 KM 7 KM 8 KM 10
3° Remove screw - item (2) Code FT FT 202/6 FT 202/7 FT 202/8 FT 202/10
4° Pull off handle - item (3)
5° Insert ring KM - item (9) - indicated in table

(on request it is supplied with the valve)
Type 14 38 12 34
FIT IN WINDOW Thickness W max 10 10 10 10
Bore for panel mount. n Y 31 36 41 51
LAST VIEW Type A B C D E F G H L M OR Sm

UNI 4535 (7)
14 39 35 5.2 M33x1.5 24 18 24 35.2 6.5 20 3118 0.8
38 44 40.5 5.2 M39x1.5 27.5 19 30 40 9 22.5 3143 0.8
12 53 49 6.5 M48x2 33.5 23.5 35 49 11 27.5 3175 0.8

PRINT
34 63 58 7 M55x2 40 27 40 57 13.5 155 32.5 1
46
QUIT
FT 270/2
Pressure compensated flow control
COMPENSATED FLOW
PRESSURE
CONTROL VALVES
needle valves
The accuracy of the working of the internal components
ensures a very low hysterisis.
The careful controls performed on all the products guaran-
tee that the valves function well even in the most difficult
working conditions.
On request
• Complete with mounting nut (G)
• Viton seals (V)

Or Nitrile
Handwheel GD Al Si 12 - UNI 5706 aluminium
HOME
INTRODUCTION
VALVES INDEX

FOR
ORDERING
FT 270/2 14 G V
Type A B C D E F G H CH Weight kg CODE

UNI 338 FT 270/2
FIT IN WINDOW 14 1/4” G 12.5 94 81.5 88.5 27 15 M20x1 30 0.580
38 3/8” G 13 110.5 94.5 103 33 17 M25x1.5 35 0.940
12 1/2” G 15.5 137 112 122 38 18 M30x1.5 45 1.830

LAST VIEW 34 3/4” G 17 163 138 150 47 24 M40x1.5 55 3.350
100 1” G 21 214 175 192 58 32 M50x1.5 70 7.000
PRINT
47
QUIT
FT 270/5
COMPENSATED
Single-acting pressure compensated On request
PRESSURE
FLOW CONTROL
VALVES
• Complete with panel mounting nut
• Viton seals (V)
Inside the base there are wide transverse sections which
aprreaciably reduce the loss of pressure.
The accuracy of the working of the internal components
ensures a very low hysterisis.
The careful controls performed on all the products
guarantee that the valves function well even in the most
difficult working conditions.

Or Nitrile
Handwheel GD Al Si 12 - UNI 5706 aluminium
HOME

FOR Code Type Panel ring Viton seal
ORDERING
FT 270/5 14 G V
INTRODUCTION
VALVES INDEX
CODE Type A B C D E F G H CH Weight kg

FT 270/5 UNI 338
FIT IN WINDOW 14 1/4” G 12.5 94 81.5 88.5 27 15 M20x1 30 0.580
38 3/8” G 13 110.5 94.5 103 33 17 M25x1 35 0.940
12 1/2” G 15.5 137 112 122 38 18 M30x1.5 45 1.830

LAST VIEW 34 3/4” G 17 163 138 150 47 24 M40x1.5 55 3.350
100 1” G 21 214 175 192 58 32 M50x1.5 70 7.000
PRINT
48
QUIT
FT 270/2 - FT 270/5
Type Working Minimum Working Filtration grade TECHNICAL
bar bar °C
14 210 5 -20°/+70° 25
38 210 7 -20°/+70° 25
12 210 10 -20°/+70° 25
34 210 10 -20°/+70° 25
100 210 16 -20°/+70° 25
FLOWRATE
CURVES
HOME
FT 270/2-270/5
INTRODUCTION
VALVES INDEX
FT 270/5
FIT IN WINDOW
LAST VIEW
PRINT
FT 270/2-270/5-14
49
QUIT
FT 270/2 - FT 270/5
FLOWRATE
CURVES
FT 270/2-270/5-38
HOME
FT 270/2-270/5-12
INTRODUCTION
VALVES INDEX
FT 270/2-270/5-34
FIT IN WINDOW
LAST VIEW
PRINT
FT 270/2-100-270/5-100
50
QUIT
FLOW CONTROL NEEDLE

VALVES MANIFOLD MOUNTED
FT 280/2
FT 280/5
FT 280/6
FT 281/2
FT 281/5
FT 288/2
HOME FT 288/5
FT 289/2
FT 289/5
INTRODUCTION
VALVES INDEX
FIT IN WINDOW
LAST VIEW
PRINT
51
QUIT
HOME
INTRODUCTION
VALVES INDEX
FIT IN WINDOW
LAST VIEW
PRINT
QUIT
FT 280/2
FT 280/2 (type 03, 60, 18, 14, 38, 12)
MANFOLD
MOUNTED
FLOW CONTROL
NEEDLE VALVES
Flow control needle valves
They allow for flow control in both directions.
Needle adjustement to give:
• full shut off (via metal seal);
There i a locking screw in the handle to allow the handle to
be fixed (preventing accidental adjustement or movement
due to vibration).
They are provided with panel mounting connections mod.
CETOP 03 or interchangeable with the broadly used valves.
Max. working pressure is 250 bar.
Terminal strip body Steel 9 S Mn Pb 28 MATERIALS

UNI 5105
Cartridge body Steel 9 S Mn Pb 28
HOME UNI 5105
Needle Steel 1 C 40 - UNI 8373
Handwheel GD Al Si 12
UNI 5706 aluminium
Nipple Nylon 6
OR Nitrile
Antiextrusion rings PTFE
INTRODUCTION All components are surface treated and protected
VALVES INDEX
CODE
FT 280/2
Type A B C D E nF G H L M N nP nQ OR Screws Weight kg
18 32 42 35 66.8 71.8 22 8 19 28.5 1.5 16 4 9.5 2025 M6x40 0.350
14 38 50 50 78.3 85.3 27 7.5 35 33.5 5 25.5 6 12.7 2037 M6x45 0.730

FIT IN WINDOW 38 44 55 55 90.5 99.5 33 12 33.5 38 3.5 25.5 8 15.7 2050 M6x50 1.040
12 55 60 70 109.1 119.6 38 18 38 44.5 4 30 11 19.7 119 M6x60 1.810
LAST VIEW Code Type EXAMPLE

FT 280/2 18
FOR
ORDERING
FT 280/2 38
PRINT
53
QUIT
FT 280/2
CODE
FT 280/2
Type A B C D E nF G H L M N P nQ nR S T OR Screws Weight kg
03 38 45 52 78.3 85.3 27 5.75 40.5 31.75 31 12.7 30.2 6 12 15.5 0.75 108 M5x40 0.700
HOME
INTRODUCTION
60 40 45 52 80.3 87.3 27 5.75 40.5 31.75 31 10 33 8 17.2 15.5 0.75 2056 M5x45 0.720
VALVES INDEX
EXAMPLE Code Type

FOR FT 280/2 03
ORDERING
FT 280/2 60
FIT IN WINDOW
LAST VIEW
PRINT
54
QUIT
FT 280/2
FLOWRATE
CURVES
FT 280/2-18
HOME
FT 280/2-14 FT 280/2-12
INTRODUCTION
VALVES INDEX
FT 280/2-38 FT 280/2-60
FIT IN WINDOW
LAST VIEW
PRINT
FT 280/2-03
55
QUIT
FT 280/5
NEEDLE VALVES
FT 280/5 (type 03, 14, 38, 12, 60)
MANIFOLD
MOUNTED
FLOW CONTROL
They are provided with plate connections mod. CETOP 03
or interchangeable with the broadly used valves.
Flow control needle valves manifold Max. working pressure is 250 bar.
mounted
They control and eventually shut-off the flow in one direc-
tion, allowing a free return in the opposed direction.
As all the valves pertaining to series FT 257, they ensure:
• flow linearity during opening;
• accurate flow control, made well visible by the double
reference device;
• wide control range of specific flowrate;
• absolute safety against needle withdrawal also in the
maximum opening position;
• positioning stability, thanks to the dowel inserted in
handwheel.
MATERIALS Terminal strip body Steel 9 S Mn Pb 28

UNI 5105
UNI 5105
Needle Steel 1 C 40 - UNI 8373
Handwheel GD Al Si 12 - UNI 5706
painted aluminium
Nipple Nylon 6
Guide cage Nylon 66 + carbon fibre
Ball Steel - UNI 100 C 6
HOME Spring Stainless steel AISI 302
Plug Steel 35 S Mn Pb 10
UNI 5105
OR Nitrile
Obturator Steel C 15 Pb
All components are surface treated and protected
INTRODUCTION
VALVES INDEX
EXAMPLE Code Type

FOR FT 280/5 14
ORDERING
FIT IN WINDOW
CODE
LAST VIEW FT 280/5
14 45 50 60.5 85.3 92.3 27 18 35 33.5 5 25.5 6 12.7 2037 M6x50 1.020
38 51 55 65 97.5 106.5 33 22 33.5 38 3.5 25.5 8 15.7 2050 M6x55 1.380

PRINT
12 65 65 82.5 119.1 129.6 38 30.5 38 44.5 4 30 11 19.7 119 M6x70 2.620
56
QUIT
FT 280/5
CODE
FT 280/5
03 45 45 57.5 85.3 92.3 27 10.3 40.5 31.75 31 12.7 30.2 6 12 15.5 0.75 108 M5x50 0.885
HOME
INTRODUCTION

VALVES INDEX
60 45 45 57 73.8 80.8 27 8.5 40.5 31.75 31 10 33 6 17.2 15.5 0.75 2056 M5x45 0.785
FLOWRATE
CURVES
FIT IN WINDOW
LAST VIEW
PRINT
FT 280/5-14 FT 280/5-38
57
QUIT
FT 280/5
FLOWRATE
CURVES
FT 280/5-12
HOME
FT 280/5-03 FT 280/5-60
INTRODUCTION
VALVES INDEX
FT 280/5 - 14 - 38 - 12
FIT IN WINDOW
LAST VIEW
PRINT
FT 280/5-03-60
58
QUIT
FT 280/6
FT 280/6 (type 03, 14, 38, 12)
MANIFOLD
MOUNTED
FLOW CONTROL
NEEDLE VALVES
Check valves manifold mounted
They are inserted in circuit branches where a free flow cir-
culation is wanted in one direction, and passage obstruc-
tion in the opposed direction.
The check valves are of ball type with guide housing and
centering, made of composite material with very high
mechanical resistence, which allows a total passage and
exceptional resistence to wear and breakage, shown by the
highstress and varied tests to which they were subjected.
They may be supplied with two setting values of the release
pressure (0.35 swtandard and 4.5 bar).
They are used for working pressures up to 250 bar.
Valve body Steel 9 S Mn Pb 28 - UNI 5105 MATERIALS

Spring Stainless steel AISI 302
Plug Steel 35 S Mn Pb 10 - UNI
5105
HOME
INTRODUCTION
Code Type EXAMPLE

VALVES INDEX FOR
FT 280/6 03
ORDERING
FIT IN WINDOW
CODE
FT 280/6
LAST VIEW
Type A B C D E F G H nL nM OR Screws Weight kg
14 20 50 60.5 18 35 33.5 5 25.5 6 12.7 2037 M6x25 0.410
38 25 55 65 22 33.5 38 3.5 25.5 8 15.7 2050 M6x30 0.605
PRINT 12 30 65 82.5 30.5 38 44.5 4 30 11 19.7 119 M6x35 1.010
59
QUIT
FT 280/6
CODE
FT 280/6
Type A B C D E F G H L nM nN P Q OR Screws Weight kg
03 20 45 57.5 10.3 40.5 31.75 31 12.7 30.2 6 12 15.5 0.75 108 M5x25 0.350
HOME
INTRODUCTION
FLOWRATE
CURVES
VALVES INDEX
FT 280/6-03 FT 280/6-14 FT 280/6-38 FT 280/6-12
FIT IN WINDOW
LAST VIEW
PRINT
60
QUIT
FT 281/2
FT 281/2 (type 03, 18, 60)
FLOW CONTROL
NEEDLE VALVES
MANIFOLD
MOUNTED
Pressure compensated fine control
needle valves manifold mounted
They are the most suitable solution for those applications

requiring precise adjustment characteristics or for reduced
rate of flow.

UNI 5105
UNI 5105
Needle Stainless steel AISI 303
UNI 6900
UNI 5706 painted aluminium
Nipple Nylon 6
Clamp disk P ALP - UNI 4507 aluminium
HOME OR Nitrile
INTRODUCTION
VALVES INDEX
CODE
FT 281/2
18 32 42 35 66 74 22 8 19 28.5 1.5 16 4 9.5 2025 M6x40 0.350
Code Type EXAMPLE

FT 281/2 18
FOR
ORDERING
FIT IN WINDOW
LAST VIEW
PRINT
61
QUIT
FT 281/2
CODE
FT 281/2
03 32 45 52 66 74 22 5.75 40.5 31.75 31 12.7 30.2 5 12 15.5 0.75 108 M5x40 0.570
60 32 45 52 66 74 22 5.75 40.5 31.75 31 10 33 5 17.2 15.5 0.75 2056 M5x40 0.570
EXAMPLE Code Type

HOME FOR FT 281/2 60
ORDERING
INTRODUCTION
FLOWRATE
CURVES
VALVES INDEX
FT 281/2-03 FT 281/2-60 FT 281/2-18
FIT IN WINDOW
LAST VIEW
PRINT
62
QUIT
FT 281/5
FT 281/5 (type 03, 60)
NEEDLE
VALVES MANIFOLD
FLOW CONTROL
MOUNTED
Fine control needle valves
manifold mounted
They are the most suitable solution for those applications
which require precise adjustments or small flowrates.

UNI 5105
UNI 5105
Needle Stainless steel AISI 303
UNI 6900 Code Type EXAMPLE
Handwheel
Nipple
GD Al Si 12 - UNI 5706 aluminium
Nylon 6 FT 281/5 03
FOR
OR Nitrile
ORDERING
Antiextrusion rings PTFE FT 281/5 60
HOME
INTRODUCTION
VALVES INDEX
CODE
FT 281/5
Type A B C D E nF G H L M N P nQ nR S T OR Viti Weight kg
03 38 45 55.5 72 80 22 9.25 40.5 31.75 31 12.7 30.2 5 12 15.5 0.75 108 M5x45 0.710
FIT IN WINDOW
LAST VIEW

PRINT
60 39 45 58 73 81 22 12 40.5 31.75 31 10 33 5 17.2 15.5 0.75 2056 M5x45 0.760
63
QUIT
FT 281/5
FLOWRATE
CURVES
HOME
FT 281/5-03 FT 281/5-60
INTRODUCTION
VALVES INDEX
FT 281/5-03 FT 281/5-60
FIT IN WINDOW
LAST VIEW
PRINT
64
QUIT
FT 288/2
FT 288/2 (type 03, 60)
MANIFOLD
MOUNTED
FLOW CONTROL
NEEDLE VALVES
Pressure compensated fine control
They are the equivalent version with panel mounting as the
regulators mod. 297/2 with threaded cartridge.

Adjusting members Steel 35 S Mn Pb 10 - UNI 5105
Compensation piston Steel 38 Ni Cr Mo 5
UNI 5332 - heat treated
UNI 5706 aluminium
Nipple Nylon 6
OR Nitrile
HOME
03 69 45 57 109 113.5 33 8.5 40.5 31.75 31 12.7 30.5 5 12.5 15.5 0.75 2037 M5x75 1.285
60 69 45 57 109 113.5 33 8.5 40.5 31.75 31 10 33 6 17.2 15.5 0.75 2056 M5x75 1.270
INTRODUCTION
EXAMPLE
FOR
ORDERING
Code Type
VALVES INDEX
FT 288/2 60
FLOWRATE
CURVES
FIT IN WINDOW
LAST VIEW
PRINT FT 288/2-03 FT 288/2-60 FT 288/2-03 FT 288/2-60
65
QUIT
FT 288/5
NEEDLE VALVES
MANIFOLD
FT 288/5 (type 03, 60)
MOUNTED
FLOW CONTROL
Single acting pressure compensated
fine control needle valves manifold
mounted
They are “single-acting” version of the valves mod. 288/2
whose principal characteristics are maintained.
CETOP 03 or interchangeable with the broadly use valves.
MATERIALS Valve body Steel 9 S Mn Pb 28 - UNI 5105

Adjusting members Steel 35 S Mn Pb 10 - UNI
5105
UNI 5706 painted aluminium
Nipple Nylon 6
Spring Stainless steel AISI 302
Plug Steel 35 S Mn Pb 10 - UNI
HOME 5105
OR Nitrile
INTRODUCTION
VALVES INDEX
FT 288/5-03 FT 288/5-60
03 81 45 57 121 125.5 33 8.5 40.5 31.75 31 12.7 30.2 5 12.5 15.5 0.75 2037 M5x85 1.490
60 84 45 57 124 128.5 33 8.5 40.5 31.75 31 10 33 6 17.2 15.5 0.75 2056 M5x90 1.530
FIT IN WINDOW
LAST VIEW
PRINT
FT 288/5-03 FT 288/5-60 FT 288/5-03 FT 288/5-60
66
QUIT
FT 289/2
FT 289/2 (type 03, 60)
MANIFOLD
MOUNTED
FLOW CONTROL
NEEDLE VALVES
Pressure compensated flow control

UNI 5706 - painted aluminium
Nipple Nylon 6
OR Nitrile
Code Type EXAMPLE
FT 289/2 03
FOR
HOME ORDERING
INTRODUCTION
VALVES INDEX
CODE
FT 289/2
03 69 45 57 109 113.5 33 8.5 40.5 31.75 31 12.7 30.5 5 12.5 15.5 0.75 2037 M5x75 1.285
60 69 45 57 109 113.5 33 8.5 40.5 31.75 31 10 33 6 17.2 15.5 0.75 2056 M5x75 1.270
FIT IN WINDOW
LAST VIEW
PRINT FT 289/2-03 FT 289/2-60 FT 289/2-03 FT 289/2-60
67
QUIT
FT 289/5
NEEDLE VALVES
FT 289/5 (type 03, 60)
MANIFOLD
MOUNTED
FLOW CONTROL
Single-acting pressure compensated
They are the “single-acting” version of the valves mod.
289/2 whose principal characteristics are maintained.
MATERIALS Valve body Steel 9 S Mn Pb 28 - UNI 5105

Handwheel GD Al Si
UNI 5706 - painted aluminium
EXAMPLE Code Type Nipple Nylon 6
FOR FT 289/5 60
Ball guide
Ball
Nylon 66 + carbon fibre
Steel - UNI 100 C 6
ORDERING Spring Stainless steel AISI 302
HOME Plug Steel 35 S Mn Pb 10 - UNI 5105
OR Nitrile
INTRODUCTION
VALVES INDEX
CODE
FT 289/5
03 81 45 57 121 125.5 33 8.5 40.5 31.75 31 12.7 30.2 5 12.5 15.5 0.75 2037 M5x85 1.490
FIT IN WINDOW
60 84 45 57 124 128.5 33 8.5 40.5 31.75 31 10 33 6 17.2 15.5 0.75 2056 M5x90 1.530
LAST VIEW
PRINT
68
QUIT
FT 289/5
FT 289/5-03 FT 289/5-60
FLOWRATE
CURVES
HOME
FT 289/5-03 FT 289/5-60
INTRODUCTION
VALVES INDEX
FT 289/5-03 FT 289/5-60
FIT IN WINDOW
LAST VIEW
PRINT
69
QUIT
HANDWHEELS WITH OPTIONAL WRENCH FOR

FT 288/2 - 288/5 - 289/2 - 289/5
Code Type A B C D
288/2 03 69 146 150.5 35
289/2 60 69 146 150.5 35
288/5 03 81 158 162.5 35
HOME 289/5 60 84 161 165.5 35
INTRODUCTION
VALVES INDEX
EXAMPLE Versions on request

FOR Code Type
ORDERING
FT 288/2 03 CH
FT 288/5 60 CH
FIT IN WINDOW
LAST VIEW
PRINT
70
QUIT
BALL VALVES
FT 221/1
FT 221/3
HOME
INTRODUCTION
VALVES INDEX
FIT IN WINDOW
LAST VIEW
PRINT
71
QUIT
FT 221/1
BALL
High pressure two-way ball valves
VALVES
Used to obtain a quick flow shut-off, avoiding noticeable
pressure drop, the FT 221/1 ball valves are designed to
obtain perfect sealing, easy and quick operation under high
pressures conditions.
Working pressure up to 500 bar most fluids.
MATERIALS Body Carbon steel

Control stem Chrome-plated steel
Ball Chrome-plated steel
Or Nitrile
Ball seal PTFE
HOME
INTRODUCTION
EXAMPLE Code Type
FOR FT 221/1 34
ORDERING
VALVES INDEX
CODE FT 221/1 Type DN PN A B C D E F nG CH Weight Fixing holes upon request

kg L M nL
18 4 500 44.5 71 33.5 37 13 115 1/8”G 9 0.300 29 27.5 4.5
14 6 500 44.5 71 33.5 37 13 115 1/4”G 9 0.374 29 27.5 4.5

FIT IN WINDOW
38 10 500 50 72 39 43 16.5 115 3/8”G 9 0.559 35 35 5.5
12 13 500 51 85 40 48 17 115 1/2”G 9 0.655 39 35.5 6.5
34 20 320 71.5 97 56 63 24 160 3/4”G 14 1.564 50 49.5 6.5

LAST VIEW
100 25 320 76 113 60 67 26.5 160 1”G 14 2.082 54 54 6.5
114 32 320 106 110 85 80 39 210 1 1/4” G 17 2.107 – – –
112 40 320 112.5 130 92 85 41.5 210 1 1/2”G 17 3.698 – – –

PRINT 200 50 320 132 140 111 100 50 210 2”G 19 6.070 – – –
72
QUIT
FT 221/3
High pressure three-way ball valves
BALL
VALVES
Used to obtain a quick flow shut-off, avoiding noticeable
pressure drop, the FT 221/3 ball valves are designed to
obtain perfect sealing, easy and quick operation under
pressures.
Working pressure up to 315 bar most fluids.
Body Carbon steel MATERIALS

Control stem Chrome-plated steel
Ball Chrome-plated steel
Or Nitrile
Ball seal PTFE
HOME
INTRODUCTION
Versions on request EXAMPLE
Code Type
FOR
ORDERING
FT 221/3 34
VALVES INDEX
CODE FT
221/3
FIT IN WINDOW
Type DN PN A B C D E F G H L M nN Weight Fixing holes upon request
kg P Q nR
18 4 500 33.5 13 71 36 8 44.5 13 9 115 44 1/8”G 0.415 27.5 27 M4
LAST VIEW 14 6 500 33.5 13 71 36 8 44.5 13 9 115 44 1/4”G 0.572 27.5 27 5.5
38 10 500 39 16.5 72 43 8 50 16.5 9 115 51 3/8”G 0.692 35 33 5.5
12 13 500 40.5 17.5 85 48 8 51.5 17.5 9 115 55 1/2”G 1.519 36 38 6.5
34 20 320 56.5 24.5 97 63 11 72 34.5 14 160 70 3/4”G 2.470 49.5 50 8.5

PRINT
100 25 320 63.5 30 113 67 11 79.5 30 114 160 87.5 1”G 2.336 54 54 8.5
73
QUIT
HOME
INTRODUCTION
VALVES INDEX
FIT IN WINDOW
LAST VIEW
PRINT
QUIT
PRESS-FORGED CONTROL
VALVES IN BRASS-58
FT 1251/2-01
FT 1251/2-02
FT 1252/2-01
FT 1252/2-02
FT 1251/5-01
FT 1253/5
HOME FT 1254/5
INTRODUCTION
VALVES INDEX
FIT IN WINDOW
LAST VIEW
PRINT
75
QUIT
FT 1251/2-01
In line double-acting needle control For use with pressures up to 210 bar.
PRESS-FORGED
CONTROL VALVES
IN BRASS-58
valves (Female/Female)
On request
• Versions in stainless steel AISI 316 code FT 2251/2-01
They allow for regulation of flow in both directions
• Viton seals (V)
Suitable for applications with air, gas and liquid in general.
• NPT threads
As an alternative to FT 257/2 where the working pressure
• Handwheel in ABS (mp) plastic
does not exceed 210 bar and when ferrous materials can-
• Complete with lock nut (G)
not be used.
Same basic characteristics as the FT 257 series:
• accurate flow regulation;
• simple setting of flow rates;
• secure against accidental needle withdrawal;
• secure needle position with locking screw inserted
in the handwheel;
• provisions for panel mounting, for which special lock
nut (G) is supplied on request.
MATERIALS Body OT 58 - UNI 5705 - Nickel plated

Needle X 10 Cr Ni S 1809 - UNI 6900
Or Nitrile
Handwheel ma GD - Al Si 12
UNI 5706 aluminium
Handwheel mp ABS plastic
HOME
INTRODUCTION
VALVES INDEX

FOR Code Type Lock Viton Handwheel ABS
ORDERING nut seal plastic
Brass FT 1251/2-01 38 G V mp
Stainl. steel FT 2251/2-01 14 G V mp

FT 1251/2-01 UNI 338
FIT IN WINDOW 18 1/8”G 8 40 55 4 22 40 12 M15x1 9.5 15 0.105
14 1/4”G 12 46 57 4.5 22 40 11.5 M17x1 11 17 0.122
38 3/8”G 13 55 69 7 27 50 12.5 M20x1 15 22 0.233

LAST VIEW 12 1/2”G 16 70 82 10 33 70 13 M25x1.5 19 27 0.455
34 3/4”G 20 91 100 12 38 80 15 M30x1.5 22 34 0.860
PRINT
76
QUIT
FT 1251/2-02
In line double-acting needle control For use with pressures up to 210 bar.
PRESS-FORGED
CONTROL VALVES
IN BRASS-58
valves (Male/Female)
On request
• Versions in stainless steel AISI 316 code FT 2251/2-02
• Viton seals (V)
Suitable for applications with air, gas and liquids in general.
• NPT threads
not be used.
• secure needle position with locking screw inserted in
the handwheel;
Body OT 58 - UNI 5705 - Nickel plated MATERIALS

Or Nitrile
UNI 5706 aluminium

HOME FOR
Code Type Lock Viton Handwheel ABS
nut seal plastic
ORDERING
Brass FT 1251/2-02 12 G V mp
Stainl. Steel FT 2251/2-02 14 G V mp

INTRODUCTION
VALVES INDEX
Type A A1 B B1 C C1 D E F F1 G H L CH Weight kg CODE

UNI 338 UNI 339 FT 1251/2-02
FIT IN WINDOW 18 1/8”G 1/8”Gc 8 9 20 24 55 4 22 40 12 M15x1 9.5 15 0.105
14 1/4”G 1/4”Gc 12 12 23 27 57 4.5 22 40 11.5 M17x1 11 17 0.130
38 3/8”G 3/8”Gc 13 13 27.5 32.5 69 7 27 50 12.5 M20x1 15 22 0.246

LAST VIEW 12 1/2”G 1/2”Gc 16 16 35 39.5 82 10 33 70 13 M25x1.5 19 27 0.448
34 3/4”G 3/4”Gc 20 20 45.5 49.5 100 12 38 80 15 M30x1.5 22 34 0.845
PRINT
77
QUIT
FT 1252/2-01
90° angle double-acting needle control They allow use with pressures up to 210 bar.
PRESS-FORGED
CONTROL VALVES
IN BRASS-58
On request
• Viton seals (V)
• NPT threads
not be used.
in the handwheel;

Or Nitrile
UNI 5706 aluminium
HOME
INTRODUCTION
VALVES INDEX

Brass FT 1252/2-01 38 G V mp

FT 1252/2-01 UNI 338
FIT IN WINDOW 18 1/8”G 8 21 69 4 22 40 12 M15x1 9.5 15 0.105
14 1/4”G 12 25 74 4.5 22 40 12 M17x1 11 17 0.136
38 3/8”G 13 29.5 88 7 27 50 11.5 M20x1 15 22 0.248

LAST VIEW 12 1/2”G 16 36 105 10 33 70 13 M25x1.5 19 27 0.454
PRINT
78
QUIT
FT 1252/2-02
90° angle double-acting needle control They allow use with pressures up to 210 bar.
PRESS-FORGED
CONTROL VALVES
IN BRASS-58
valves (Male/Female)
On request
• Viton seals (V)
• NPT threads
not be used.
• full shut off via metal seal;
• simple setting of flowrates;
in the handwheel;
HOME
INTRODUCTION
Body OT 58 - UNI 5705 - Nickel plated MATERIALS
Or Nitrile
UNI 5706 aluminium
VALVES INDEX Handwheel mp ABS plastic

Code Type Lock Viton Handwheel ABS
FOR
nut seal plastic
ORDERING
Brass FT 1252/2-02 12 G V mp
Type A A1 B B1 C C1 D E F F1 G H L CH Weight kg CODE

UNI 339 UNI 338 FT 1252/2-02
FIT IN WINDOW 18 1/8”Gc 1/8”G 8 9 21 21 70 4 22 40 12 M15x1 9.5 15 0.102
14 1/4”Gc 1/4”G 12 12 25 25 74 4.5 22 40 12 M17x1 11 17 0.132
38 3/8”Gc 3/8”G 13 13 29.5 29.5 88 7 27 50 11.5 M20x1 15 22 0.245

LAST VIEW 12 1/2”Gc 1/2”G 16 16 36 36 105 10 33 70 13 M25x1.5 19 27 0.440
PRINT
79
QUIT
FT 1251/5-01
In line single-acting needle control Max. working pressure is 210 bar.
PRESS-FORGED
CONTROL VALVES
IN BRASS-58
On request
They allow for regulation of flow in one direction and full
• NPT threads
free flow in the opposed direction.
not be used.
Suitable for application with air, gas and liquids in general.
in the handwheel;
nut (G) is supplied (on request only).

Or Nitrile
UNI 5706 aluminium
Spring AISI 302
Ball UNI 100 C 6
HOME
INTRODUCTION
VALVES INDEX

Brass FT 1251/5-01 38 G V mp

FT 1251/5-01 UNI 338
FIT IN WINDOW 14 1/4”G 12 56 57 4.5 22 40 11.5 M17x1 11 17 0.138
38 3/8”G 13 64.5 69 7 27 50 12.5 M20x1 15 22 0.259
12 1/2”G 16 87 82 10 33 70 13 M25x1.5 19 27 0.499

LAST VIEW 34 3/4”G 20 115 100 12 38 80 15 M30x1.5 22 34 0.975
PRINT
80
QUIT
FT 1253/5
Single-acting needle control valves On request
PRESS-FORGED
CONTROL VALVES
IN BRASS-58
• Versions in stainless steel AISI 316 code FT 2253/5
They ensure an accurate control of the fluid in one direc- • Seals in Viton (V)
tions and allow for free passage in the opposed direction • NPT threads
As an alternative to FT 257/5 where the working pressure • Handwheel in ABS (mp) plastic
does not exceed 210 bar and when ferrous materials can- • Complete with lock nut (G)
not be used.
in the handwheel;
• provisions for panel mounting, for which special lock nut
(G) is supplied (on request only).
HOME
INTRODUCTION
Body OT 58 - UNI 5705 MATERIALS
Nickel plated
Or Nitrile
VALVES INDEX UNI 5706 aluminium
Versions on request Accessories on request EXAMPLE

Code Connect. M/F Type Lock Viton Handwheel ABS
FOR
nut seal plastic
ORDERING
Brass FT 1253/5 02 12 G V mp
Stainl. Steel FT 2253/5 02 18 G V mp
Type A B C D E F F1 G H L CH Weight kg CODE

UNI 338 FT 1253/5
FIT IN WINDOW 18 1/8”G 8 40 55 4 22 40 12 M15x1 9.5 15 0.105
14 1/4”G 12 46 57 4.5 22 40 11.5 M17x1 11 17 0.135
38 3/8”G 13 55 69 7 27 50 12.5 M20x1 15 22 0.250

LAST VIEW 12 1/2”G 16 70 82 10 33 70 13 M25x1.5 19 27 0.460
34 3/4”G 20 91 100 12 38 80 15 M30x1.5 22 34 0.860
PRINT
81
QUIT
FT 1254/5-01
90° single-acting needle control valves Max. working pressure is 210 bar.
PRESS-FORGED
CONTROL VALVES
IN BRASS-58
They ensure an accurate control of the fluid in one On request
directions and allow for free passage in the opposed • Seals in Viton (V)
direction • NPT threads
As an alternative to FT 257/5 where the working pressure • Handwheel in ABS (mp) plastic
does not exceed 210 bar and when ferrous materials
cannot be used.
in the handwheel;
• provisions for panel mounting, for which special lock nut
(G) is supplied (on request only).
MATERIALS Body OT 58 - UNI 5705

Nickel plated
Or Nitrile
UNI 5706 aluminium
HOME
INTRODUCTION
VALVES INDEX
EXAMPLE Versions Accessories

FOR on request on request
ORDERING Code Connect. Type Lock nut Viton seal Handwheel ABS
M/F plastic
Brass FT 1254/5 02 38 G V mp
FIT IN WINDOW CODE Type A B C D E F F1 G H L CH Weight kg

FT 1254/5-01 UNI 338
18 1/8”G 8 21 69 4 22 40 12 M15x1 9.5 15 0.105
14 1/4”G 12 25 74 4.5 22 40 11.5 M17x1 11 17 0.137

LAST VIEW
38 3/8”G 13 29.5 88 7 27 50 12.5 M20x1 15 22 0.251
12 1/2”G 16 36 105 10 33 70 13 M25x1.5 19 27 0.450
PRINT
82
QUIT
FT 1251/2-FT 1252/2 - FT 1251/5

Type Port section Max. working Working Filtration grade TECHNICAL
sq. mm pressure bar temperature °C µm absolute DATA
18 7.07 210 -20°/+100° 25
FT 1251/2
FT 1252/2
14 12.57 210 -20°/+100° 25
38 19.64 210 -20°/+100° 25
12 50.27 210 -20°/+100° 25
34 78.54 210 -20°/+100° 25

sq. mm pressure bar temperature °C µm absolute DATA
14 12.57 210 -20°/+100° 25
FT 1251/5
38 19.64 210 -20°/+100° 25
12 50.27 210 -20°/+100° 25
34 78.54 210 -20°/+100° 25

HOME
FLOWRATE
CURVES
INTRODUCTION
VALVES INDEX
FT 1251/2-1252/2-18 FT 1251/2-1252/2-14 FT 1251/5
FIT IN WINDOW
LAST VIEW
PRINT
FT 1251/2-1252/2-1521/5-38
83
QUIT
FT 1251/2-FT 1252/2 - FT 1251/5
FLOWRATE
CURVES
HOME
FT 1251/2-1252/2-1251/5-12 FT 1251/2-34
INTRODUCTION
VALVES INDEX
FT 1251/5-34 FT 1251/5
FIT IN WINDOW
LAST VIEW
PRINT
84
QUIT
FT 1253/5 - FT 1254/5
sq. mm pressure
bar
temperature
°C
µm absolute DATA
18 7.07 210 -20°/+100° 25
14 12.57 210 -20°/+100° 25
38 19.64 210 -20°/+100° 25
12 50.27 210 -20°/+100° 25
34 78.54 210 -20°/+100° 25
FLOWRATE
CURVES
HOME
FT 1253/5-1254/5-18 FT 1253/5-1254/5-14
INTRODUCTION
VALVES INDEX
FT 1253/5-1254/5-38 FT 1253/5-1254/5-12
FIT IN WINDOW
LAST VIEW
PRINT FT 1253/5-34 FT 1253/5-1254/5
85
QUIT
SERIE FT 1250
DISASSEMBLY
INSTRUCTIONS
TO FIT PANEL
MOUNT NUT
Panel mounting
1° Loosen grub screw pressure dowel - item (4) 1
2° Remove plug - item (1) 2
3° Remove screw - item (2)

3
4° Pull off handwheel - item (3)
HOME 5° Insert ring FT 1203 - item (9) indicated in table 4

(on request it is supplied with the valve)
5
9 6
INTRODUCTION 7
(A) Max thickness A
(B) Bore for panel mounting n 8
VALVES INDEX
n B
Guarnizioni di ricambio e ghiere
Type OR (7) BK (6) Ghiera (9) A max nB

FIT IN WINDOW
18 2018 2018 FT 1203/18 5 16
14 2018 2018 FT 1203/14 5 18
38 2021 2021 FT 1203/38 5 21

LAST VIEW
12 108 108 FT 1203/12 6 26
34 2043 2043 FT 1203/34 6 31
PRINT
86
QUIT
FINE CONTROL
NEEDLE VALVES
FT 1237/2
FT 1237/5
FT 1247/2
HOME
INTRODUCTION
VALVES INDEX
FIT IN WINDOW
LAST VIEW
PRINT
87
QUIT
FT 1237/2
FINE
CONTROL
In line double-acting fine control
VALVES
needle valves
FT’s solution for applications requiring precise adjustement
of small flow rates.
For both hydraulic-pneumatic applications with flow rates up
to 3 l/min max.
same basic characteristics as the FT 1250 series:
• provision for panel mounting;
• security against accidental needle withdrawal.
On request
• NPT threads
• Viton seals
MATERIALS Body OT 58 - UNI 5705 - Passivated

Or Nitrile
Handwheel ma. GD Al Si 12
UNI 5706 aluminium
HOME
INTRODUCTION
FOR Code Type Lock Vitol
ORDERING nut seal
Brass FT 1237/2 18 G V
VALVES INDEX

1237/2 UNI 338
FIT IN WINDOW 18 1/8”G 8 40 55 4 22 12 M15x1 9.5 15 0.105
LAST VIEW
PRINT
88
QUIT
FT 1237/5
In line single-acting fine control
FINE CONTROL
NEEDLE VALVES
needle valves
to 3 l/min max.
• provision for panel mounting;
On request
• NPT threads
• Viton seals
Body OT 58 - UNI 5705 - Passivated MATERIALS

Or Nitrile
UNI 5706 aluminium
Spring AISI 302
Ball UNI 100 C 6
HOME
INTRODUCTION
Code Type Lock nut Viton seal
FOR
ORDERING
Brass FT 1237/5 18 G V
VALVES INDEX
Type A B C D E F G H L CH Weight kg CODE

UNI 338 1237/5
FIT IN WINDOW 18 1/8”G 8 46.5 55 4 22 12 M15x1 9.5 15 0.110
LAST VIEW
PRINT
89
QUIT
FT 1247/2
NEEDLE VALVES
Double-acting fine control needle val-
FINE CONTROL
ves cartridge mounted
to 3 l/min max.
On request
• Viton seals
MATERIALS Body OT 58 - UNI 5705 - Passivated

Or Nitrile
Handwheel GD Al Si 12 - UNI 5706
aluminium
HOME
INTRODUCTION
ORDERING
FT 1247/2 18 V
VALVES INDEX
CODE Type A B E F G H L CH Weight kg (1) OR (2) BK

1247/2 UNI 4534
FIT IN WINDOW 18 M15x1 12 20.5 22 34.5 55 8 22 0.069 108 108
LAST VIEW
PRINT
90
QUIT
FT 1237/2-FT 1237/5-FT 1247/2
Type Port section Max. working Working Filtration TECHNICAL

sq. mm pressure
bar
temperature
°C
grade
µm
DATA
18 3,14 210 -20°/+100° 25
HOME
INTRODUCTION
VALVES INDEX FLOWRATE

FT 1237/2-1237/5-1247/2-18 CURVES
FIT IN WINDOW
FT 1237/5-18
LAST VIEW
PRINT
91
QUIT
SERIE FT 1237
DISASSEMBLY
INSTRUCTIONS
TO FIT PANEL
MOUNT NUT
Panel mounting
1° Unscrew handle lock screw - item (4) 1
2° Remove cover plate - item (1) 2

3
HOME 5° Insert ring FT 1203 - item (9) 4

indicated in table (on request it is supplied
with the valve)
5
9 6
INTRODUCTION 7
A
8
VALVES INDEX
Seal and lock nut spare parts
Type 18
(7) OR 2018
FIT IN WINDOW (6) Antiextrusion ring 2018
(9) Lock nut KM KM2

(FT 202/2)
Thickness A max 6
LAST VIEW
Bore for panel mounting n B 16
PRINT
92
QUIT
MOUNTING
SCHEMES FOR
SEATS OF
FT 1247/2
VALVES
CARTRIDGE
MOUNTED
Detail of machining which may be Detail of machining which may

executed in alternative be executed in alternative to
to the conical one, the conical one,
eliminating dimension E1 Flat seal eliminating dimension E1 Bonded seal
HOME
Sealing achieved by O-ring on flat seals
Type A B C D E E1 F G H L M Sm OR
UNI 4354
18 23 19 2 M15x1 14 13 11 12 21.5 4 11.5 0.5 3056

INTRODUCTION
Sealing achieved by Bonded seals
Type A C D E E1 F G H L M Sm Bonded seal

UNI 4534
VALVES INDEX 18 23 1 M15x1 13 12 9 12 20 4 10.3 0.5 400-512
FIT IN WINDOW
LAST VIEW
Conical seat
Sealing achieved by O-ring seals on conical seat
Type A nB C D E F ØG H ∆L M Sm OR
UNI 4534
PRINT
18 16.2 M15x1 0.25 14 13 11 12 21.5 4 11.5 0.5 205
93
QUIT
HOME
INTRODUCTION
VALVES INDEX
FIT IN WINDOW
LAST VIEW
PRINT
QUIT
GB-TognellaxCD(98/124) 20/08/2001 12:01 Pagina 1
GAUGE ISOLATOR
VALVES
FT 290
FT 291
FT 292
FT 293
HOME
INTRODUCTION
VALVES INDEX
FIT IN WINDOW
LAST VIEW
PRINT
95
QUIT
FT 290
GAUGE ISOLATOR
In line gauge isolator needle valves On request
VALVES
• Versions with connections Female/Female (01)
The FT 290 isolator needle valves (in line) are normally • For rigid pipes (04)
used to protect the pressure gauge, since they have the • For flexible pipes (05)
double function of dampening pressure surge during ope- • Seals in Viton (V)
ning and of isolating the pressure-gauge entirely. • Complete with lock nut (G). Indicate whether KM
A rotating (locating) swivel nut allows for accurate pressure or hexagonal.
gauge orientation.
For pressure-gauges with taper thread, it is necessary to
use copper plug nuts FT 1201 illustrated on page 104 of
this catalog to be requested separately.
Suitable for pressure up to 400 bar and temperature from
-20 to +100 they can be panel mounted by use of lock nut
(G) which may be supplied on request.

Press forg.
Needle 35 S Mn Pb 10 - UNI 5105
Burnished
Or Nitrile
Handwheel Nylon 66
HOME
EXAMPLE Code FT 290

FOR
ORDERING
INTRODUCTION
Special version Accessories on request
Code Type Connection Lock nut Viton seal

Fem./Fem.
FT 290 14 01 G V
VALVES INDEX
FT 290 12 – G –
CODE
FT 290
Type A1 A2 B C D E F G H L M N P S OR ES Weight kg
UNI 338 UNI 339
FIT IN WINDOW 14 1/4”G 1/4”Gc 13 5.6 20 61.5 34 12 M15x1 53 15 2 8.5 33 2018 18 0.125
12 1/2”G 1/2”Gc 16 6.5 32 83 40 12.5 M20x1 82.5 19 6 11 40 2021 27 0.413
LAST VIEW
PRINT
96
QUIT
FT 290
Special versions only for type 14
GAUGE ISOLATOR
VALVES
Supplied on request for quantities of at
least 200 pieces
Code FT 290-01 Code FT 290-04

Connection: Female-Female Connection: rigid pipes - DIN 2353
HOME
INTRODUCTION
Code FT 290-05
Connection: flexible pipes DIN 3861
VALVES INDEX DIN 7611
FIT IN WINDOW
LAST VIEW
A B1 B2 B3 C D E1 E2 E3 F G H L M N P R S1 S2 S3 OR ES Weight kg
UNI 338
1/4”G 11 15 6.5 5.6 20 54.5 69.5 66 34 12 M15x1 53 15 2 8.5 6 25 25 30 2108 18 01 0,125

PRINT 04 0,150
05 0,145
97
QUIT
FT 291
GAUGE ISOLATOR
90° angle gauge isolator needle valves lock nut (G) which may be supplied on request.
VALVES
The FT 291 isolator needle valves (angle) are normally used On request
to protect the pressure gauge since they have the double • Versions with connections Female/Female (01)
function of dampening pressure surge during opening and • For rigid pipes (04)
of isolating the pressure-gauge entirely. • For flexible pipes (05)
A rotating (locating) swivel nut allows for accurate pressure • Seals in Viton (V)
gauge orientation. • Complete with lock nut (G). Indicate whether KM
For pressure - gauges with taper threads, it will be neces- or hexagonal.
sary to use copper plug nuts FT 1201 illustrated on page
104 of this catalog to be requested separately.
Provided with connector FT 299-24 (see page 103) they
also allow the connection of “Pressure gauges with
connection 1/2” Gas”. (As alternative it is advisable to use
the mod. FT 290-12).
Suitable for pressure up to 400 bar and temperature
from -20 to +100 they can be panel mounted by use of

Press forg.
Needle 35 S Mn Pb 10 - UNI 5105
Brunished
Or Nitrile
Handwheel Nylon 66
Code FT 291
HOME
INTRODUCTION
VALVES INDEX

FOR Code Connections Lock nut Viton seal
ORDERING Fem./Fem.
FT 291 01 G V
CODE
FT 291
FIT IN WINDOW A1 A2 B C D E F G H L M N P Q ES OR Weight kg.
UNI 338 UNI 339
1/4”G 1/4”Gc 13.5 5.6 22 40 34 10 M15x1 66 11 2 8.5 28 18 2108 0.105
LAST VIEW
PRINT
98
QUIT
FT 291
Special versions
GAUGE ISOLATOR
VALVES
Supplied on request for quantities of at
least 200 pieces
Code FT 291-01 Code FT 291-04

Connection: Female-Female Connection: rigid pipes - DIN 2353
HOME
INTRODUCTION
Code FT 291-05
Connection: flexible pipes DIN 3861
VALVES INDEX DIN 7611
FIT IN WINDOW
LAST VIEW
A B1 B2 B3 C D E F G H L1 L2 L3 M N P Q1 Q2 Q3 R ES OR Weight kg
UNI 338
1/4”G 11 15 6.5 5.6 22 40 34 10 M15x1 65 73 69.5 11 2 9.5 27 20 25 6 18 2018 01 0,125

PRINT 04 0,135
05 0,130
99
QUIT
FT 292
GAUGE ISOLATOR
Push-button gauge isolator valves
VALVES
The new FT 292 push-button isolator valves are used to
protect pressure-gauges, since they have the double func-
tion of dampening the pressure surge during opening and
of isolating the pressure-gauge entirely.
A reading is obtained by depressing the button. Releasing
the button shuts off the flow to the gauge with residual
pressure being automatically drained.
The button can be locked to give a continuos reading.
The maximum release pressure is 50 Kg/sq cm.
Panel mounting facility.
Panel mounting fixtures are supplied only if expressly reque-
sted, indicate whether KM or hexagonal.
Complete with connector FT 299 (see page 103), they
allow for full location orientation for ease of reading.
They may be used for working pressures up to 400 bar.
MATERIALS Body 9 S Mn Pb 23
UNI 5105 - Press forg.
Cursor 35 S Mn Pb 10 - UNI 5105
Heat treatm.
Push-button Nylon 66
Or Nitrile
Weight kg 0.265
HOME
INTRODUCTION
FOR Code Panel mounting nut Name plate
ORDERING
FT 292 G T
VALVES INDEX
nA B C
1/4”G 45 80
FIT IN WINDOW
1/2”G 50 85
LAST VIEW
PRINT
100
QUIT
FT 293
Push button gauge isolator
GAUGE ISOLATOR
VALVES
valves - manifold mounted
The new FT 293 push-button isolator valves are used to
protect pressure-gauges, since they have the double func-
tion of dampening the pressure surge during opening and
of isolating the pressure-gauge fentirely.
A reading is obtained by depressing the button. Releasing
the button shuts off the flow to the gauge with residual
pressure being automatically drained.
Complete with connector FT 299 (see page 103), they
allow for full location orientation for ease reading.
They may be used for working pressures up to 400 bar.

Press forg.
Cursor 35 S Mn Pb 10 - UNI 5105
Heat treatm.
Push-button Nylon 66
Or Nitrile
Weight kg 0.890
HOME Versions on request EXAMPLE

Code FT 293-03
FOR
ORDERING
FT 293 FT 293-03
INTRODUCTION
VALVES INDEX
FIT IN WINDOW
LAST VIEW
nA 1/4”G 1/2”G nA 1/4”G 1/2”G
B 36.5 40.5 B 36.5 40.5

PRINT
C 75.5 82 C 75.5 82
101
QUIT
SERIE FT 290 - 291

DISASSEMBLY
INSTRUCTIONS
TO FIT PANEL
MOUNT NUT
Panel mounting
1

2
3° Insert ring KM type (FT 202)
or exagonal (FT 205)
HOME
5
3
INTRODUCTION
4
VALVES INDEX A
B
n
Seal and look nut spare parts
(3) OR (4) BK (5) Antiextr.ring on request A max nB

FIT IN WINDOW
2018 2018 KM 2 hexagonal type 5 16
(FT 202/2) FT 205
LAST VIEW
PRINT
102
QUIT
FT 299
Pressure gauge swivel adaptors - 400 bar rated
ADAPTOR
Adaptors FT 299 allow the connection of a pressure gauge
direct to the system. They provide for correct dial orienta-
tion.
The adaptor has a built in ‘O-ring’ seal for use with pressure
gauges with sealing nipple to DIN 16288.
The oil flow is restricted to the gauge dampen any pressure
shock surges.
A gasket, supplied as current product and inserted in the
rotating nut, impedes any blow-by between fitting and pres-
sure gauge. In case the pressure-gauge is provided with a
taper thread, it is necessary to use copper plug nuts FT
1201 on page 104 of this catalogue, to be requested sepa-
rately.

Nut 9 S Mn Pb 23 - UNI 5105
Or Nitrile
HOME
INTRODUCTION
Code Type EXAMPLE
FT 299 44
FOR
ORDERING
VALVES INDEX
Type A B C D E OR CH1 CH2 Weight kg CODE

UNI 338 UNI 339 FT 299
FIT IN WINDOW 88 1/8”G 1/8”Gc 9 22 7.5 2010 14 12 0.021
44 1/4”G 1/4”Gc 13 27 9.5 2018 18 17 0.040
42 1/4”G 1/4”Gc 16 31 9.5 2018 18 22 0.068

LAST VIEW 24 1/2”G 1/2”Gc 13 31 11 108 27 22 0.090
22 1/2”G 1/2”Gc 16 34 11 108 27 22 0.100
On request with cylindrical thread
PRINT
103
QUIT
FT 1201
SEALS
For use with pressure gauges with sealing
COPPER GAUGE
nipple to DIN 16288.
MATERIALS Cu - DHP - UNI 5649
HOME
INTRODUCTION
EXAMPLE Code Type
FOR FT 1201 14
ORDERING
VALVES INDEX
CODE Type A B C Weight kg/100 pieces

FT 1201 UNI 338
FIT IN WINDOW 14 1/4”G 6.5 5.5 0.200
12 1/2”G 8 6.5 0.700
LAST VIEW
PRINT
104
QUIT
CALCULATION FORMULAS
HOME
INTRODUCTION
VALVES INDEX
FIT IN WINDOW
LAST VIEW
PRINT
QUIT
CALCULATION 1) Low viscosity liquids
FORMULAS
ACCORDING ∆P
Q = Kv .
γ FORMULA TO OBTAIN THE VALVE FLOWRATE
TO Kv
VALVE ∆P = P1 - P2 Difference between downstream and upstream
COEFFICIENT valve pressure (bar)
γ Water density
Kv Valve coefficient depending on inner valve geometry.

This value is obtained experimentally
Ex:
To determine the water flowrate in L/min with a valve FT 1251/2-12 with Kv = 15.4
L . 1
Kv = 15.4 . Valve coefficient in L/min
min bar
P1 = 8 . bar Downstream pressure
P2 = 5 . bar Upstream pressure
∆P = (P1 – P2) Pressure difference
HOME γ water = 1 Water density
∆P L
Q = Kv . Q = 26.674 . Flowrate in L/min
γ water min
INTRODUCTION
2) Viscous liquids
The Kv valve coefficient has to be multiplied by a factor F>1 with a viscous liquid.
F is obtained through a Z parameter
2100 . Q
VALVES INDEX Z= Z PARAMETER
ν. Kv
ν Kinematic viscosity in centistokes
Q Valve flowrate in mc/h
Kv Valve coefficient in mc/h
Ex:
To determine the suitable valve to let in 80 L/min oil with 2 bar ∆P
ν = 23 . centistokes Oil kinematic viscosity
γ water = 1 Kg/dm3 Water density

FIT IN WINDOW
∆P = 2 . bar Difference between downstream
and upstream valve pressure
L
Q = 8O . = 4.8 m3/h Valve flowrate requested
min
LAST VIEW
Q L . 1
Kv1 = Kv1 = 56.57 . Valve coefficient for
∆P min bar ow viscosity liquids
γ in L/min
m3 . 1
Kv2 = Kv1 Kv2 = 3.39 . Valve coefficient corrected
PRINT h bar in mc/h
106
QUIT
2100 . Q Z parameter
Z= z = 238
ν . Kv2
From the graphic it is possible to obtain the F
F = 1.25 Corrective factor
You find out the right Kv by moltiplying Kv1 by F:
L . 1
Kv = F . Kv1 Kv = 65.192 Coefficient of a valve suitable
min bar to let 80 L/min of oil with ν = 23
centistokes with ∆P
of 2 bar
2.8
➞F
2.6
2.4
2.2
HOME
2.0
1.8
INTRODUCTION
1.6
1.4
1.2
VALVES INDEX
0
30 50 100 200 500 1000 2100
➞Z
Factor F as a function of the parameter Z
FIT IN WINDOW
LAST VIEW
PRINT
107
QUIT
3) Gas
P1 - P2 . P2 FORMULA TO OBTAIN A STANDARD

Qn = 28.81. Kv .
γ relat. T1 VALVE FLOWRATE (N-l/min)
This formula is valid until the ratio P2/P1 does not go under the value P2crit./P1, corresponding to the sonic flow.
For ratio P2/P1 inferior to such a value, flow is costant.
As the value P2crit./P1 is about 0.5, the formula of the max. valve flowrate for gas is obtained through the following formula
1 FORMULA TO OBTAIN THE MAX VALVE

Qnmax = 14.41. Kv . P1 .
γ relat. . T1 FLOWRATE (N-l/min)
∆P = P1 - P2 Difference between downstream and upstream

valve pressure (bar)
T1 Absolute gas temperature upstream the valve
γ Gas density
γ air Air density
γ relat. Relative gas/air density
HOME Ex:
To determine nitrogen flowrate at 20°C with P1 = 7 bar and P2 = 5 bar of the valve FT 1251/2-12
K
Kv = 15.4 . L . Valve coefficient
min . bar
INTRODUCTION T1 = 273 . K + t T1 = 293 . K Absolute temperature
kg
γ nitrogen = 1.1451 . Nitrogen density
m3
kg
γ air = 1.1839 . Air density
m3
VALVES INDEX
γ nitrogen
γ relat. = γ relat. = 0.967 Relative density
γ air
P2
P crit. = P crit. = 0.714 Critical pressure (for values superior to 0.5
P1 use the following formula
P1 - P2 . P2 L
Qn = 28.81. Kv . Qn = 83.342 . Flowrate in NL/min
γ relat. T1 min
Nmc
Qn1 = Qn x 60/1000 = Nmc/h Qn1 = 5 . Flowrate in Nmc/h
h
FIT IN WINDOW Mass flowrate
G = Qn1 . γ FORMULA TO DETERMINE THE VALVE MASS FLOWRATE
Then we have
LAST VIEW
kg
G = Qn1 . γ nitrogen G = 5.726 . Valve flowrate in kg/h
h
PRINT
108
QUIT
Air density under RSA conditions
RSA = REFERENCE STANDARD ATMOSPHERE ACCORDING TO UNI - ISO 8778
P = 1 . bar Pressure
Ta = 293 . K Absolute temperature
τ = 0.65 Relativ humidity

kg
γ air = 1.1839 . Air density under RSA conditions
m3
Gas denomination Chemical formula Density kg/m3 Relative density
Acetylene C2H2 1.0721 0.9056

Ammonia NH3 0.7058 0.5962
Carbon dioxide CO2 1.8092 1.5282
Sulphur dioxide SO2 2.68 2.2637
Air 1.1839 1
Nitrogen N2 1.1451 0.9672
Standard butane C4H10 2.4473 2.0672
HOME Chlorine Cl2 2.9455 2.488
Helium He 0.1634 0.138
Hydrogen H2 0.0823 0.0695
Methane CH4 0.6565 0.5545
Neon Ne 0.8242 0.6962
Carbon monoxide CO 1.1445 0.9667
INTRODUCTION Oxygen O2 1.3083 1.1051
Ozone O3 2.0326 1.7169
Propane C3H8 1.8495 1.5622
VALVES INDEX
Middle specific gravity of some liquids at a pressure of 1 kg/cm2

Substance Specific gravity Grades centigrade
FIT IN WINDOW
Acetone 0.79 20
Hydrochloric acid HCI 1.05 15
Nitric acid HNO3 1.15 15
Sulphuric acid H2SO4 1.05 15
LAST VIEW Sea water 1.03 15
Gasoline 0.7 15
Benzol 0.9 0
Ethyl ether 0.74 0
Pure glycerine 1.26 0
Oil 0.76 19
Wine 0.98 15
PRINT
109
QUIT
Kv GRAPHIC Knob turns Type 18 Type 14 Type 38 Type 12 Type 34
FOR VALVES 1 0.447 0.45 0.585 1.48 2.7
FT 1251/2 2
3
0.767
1.145
0.87
1.26
1.02
2.25
2.7
4.11
4.5
6.42
FT 1251/5 4 1.43 1.65 3.33 6.48 8.76
5 1.8 1.95 3.81 9.06 13.5
5.75 2.05 2.265 5 10.365 14.62
6 2.37 5.4 10.8 15
6.25 2.58 5.5 11.37 15.6
6.75 5.7 12.51 16.8
7 13.08 17.4
8 14.52 18.48
8.75 15.6 19.92
9 20.4
10 23.7
Kv FACTOR Type Kv 25
FREE FLOW 14 10.8

FOR VALVE 38 20.72
12 43.97
FT 1251/5 34 53.94
20
HOME The Kv valve coefficient

Kv GRAPHIC 15
FOR VALVE
FT 1237/2
MICROFINE
INTRODUCTION
0.9 10
0.8
VALVES INDEX 5
0.7
0.6
7/2
The Kv valve coefficient
0
123
1 2 3 4 5 5.75 6 6.25 6.75 7 8 8.75 9 10

0.5 Knob turns
Type 18
0.4 Type 14
Type 38
FIT IN WINDOW Type 12

0.3
Type 34
Knob turns 1237/2
1 0.01
0.2
2 0.136
LAST VIEW 3 0.245
4 0.35
0.1 5 0.431
6 0.512
7 0.6
0 8 0.642
1 2 3 4 5 6 7 8 9 10
PRINT 9 0.693
Knob turns 10 0.775
110
QUIT
Knob turns Type 18 Type 14 Type 38 Type 12 Type 34 Type 100 Type 114 Type 112 Type 200 Kv GRAPHIC
1 FOR VALVE
2 0.66 0.47 1.4 2.06 1.85 6.6 6.2 8.7 9.7 FT 257/2
3 1.12 1.27 2.72 3.71 3.61 12.9 12.7 15.6 16.5
4 1.59 1.81 4.12 5.57 5.67 18.9 19.05 22.7 23.5
5 2.63 5.57 7.21 7.71 24.8 25.9 30.4 31.1
6 6.97 8.93 9.57 30.2 31.3 40.4 39.7
7 7.77 10.31 11.65 35.7 37.1 49 46.6
8 10.93 13.5 39.4 40.2 54.2 55.4
9 15.2 50.2 78.3 82.5
10 16.5 70 107.3
Type 18 120
Type 14
Type 38
Type 12
100
Type 34
Type 100
Type 114
Type 112
80
Type 200
HOME
60
INTRODUCTION
40
VALVES INDEX
20
0
1 2 3 4 5 6 7 8 9 10
Knob turns
FIT IN WINDOW
LAST VIEW
PRINT
111
QUIT
Kv GRAPHIC Knob turns Type 18 Type 14 Type 38 Type 12 Type 34 Type 100 Type 114 Type 112 Type 200
FOR VALVE 1
FT 257/5 2 0.57 0.49 1.11 1.85 2.3 8.97 6.4 7 11.8
3 0.95 1.4 2.84 3.92 5.1 17.2 10.9 12.3 18.8
4 1.3 2.1 3.92 5.48 7.4 22.8 15.2 17.8 26.3
5 2.84 4.95 6.95 9.2 26.8 19.8 23.3 34.4
6 5.83 8.39 11.2 29.9 24.4 28.9 43.5
7 6.68 9.03 13.2 31.7 29.1 34.2 49.9
8 9.73 14.6 35.8 32.5 40.1 57.7
9 15.5 42.06 47.6 62.9 75.9
10 17.1 53.3 71.1 99.1
10.5 56.3
Type 18 120
Type 14
Type 38
Type 12
100
Type 34
Type 100
Type 114
Type 112
80
HOME Type 200
60
INTRODUCTION
40
VALVES INDEX
20
0
1 2 3 4 5 6 7 8 9 10 10.5
Knob turns
Kv FACTOR Type Kv
FREE FLOW 18 4.23
FIT IN WINDOW FOR VALVE 14 10.9
38 27.74
FT 257/5 12 48.98
34 63.5
100 77.5
LAST VIEW 114 153.5
112 205
200 360
PRINT
112
QUIT
Knob turns Type 18 Microfine Kv FACTOR
1 FOR VALVE
2 0.023 FT 247/2
3 0.124
4 0.226
5 0.323
6 0.468
7 0.567
8 0.691
9 0.830
10 1
1.2
0.8
HOME
0.6
INTRODUCTION
0.4
VALVES INDEX
0.2
0
1 2 3 4 5 6 7 8 9 10 11 12 13
Knob turns
FIT IN WINDOW
LAST VIEW
PRINT
113
QUIT
Kv GRAPHIC Knob turns Type 18 Type 14 Type 38 Type 12 Type 34 Type 100
FOR VALVE 1
FT 267/2 2 0.62 0.72 0.93 1.69 2.62 5.98
3 0.95 1.56 1.69 3.5 5.01 11.75
4 1.28 2.38 2.91 5.15 7.4 17.32
5 1.77 3.52 4 6.37 9.69 23.2
6 2.41 5.65 8.04 12.16 28.04
7 2.6 10.31 14.93 32.6
8 2.7 17.32 37.5
9 18.64 49
10 58.3
11 61.3
12 63.96
Type 18 70
Type 14
Type 38
Type 12
60
Type 34
Type 100
HOME The Kv valve coefficient 50
40
INTRODUCTION
30
VALVES INDEX
20
10
0
1 2 3 4 5 6 7 8 9 10 11 12
FIT IN WINDOW
Knob turns
LAST VIEW
PRINT
114
QUIT
Knob turns Type 14 Type 38 Type 12 Type 34 Type 100 Kv GRAPHIC
1 FOR VALVE
2 1.24 2.16 0.87 1.54 3.92 FT 267/5
3 2.31 3.71 3.13 4.35 8.76
4 3.35 4.91 6 7.68 13.36
5 6.18 8.7 11.32 17.73
6 8.82 10.8 13.98 23.7
7 12.9 16.74 31.5
8 15.6 19.09 47.1
Type 14 50
Type 38
Type 12 45
Type 34
Type 100
40
35
30
HOME
25
20
INTRODUCTION
15
10
VALVES INDEX
5
0
1 2 3 4 5 6 7 8
Knob turns
Type Kv Kv FACTOR
14 9.7 FREE FLOW
FIT IN WINDOW 38 23.7 FOR VALVE
12 40.2
34 51.5
FT 267/5
100 67
LAST VIEW
Type Kv Kv FACTOR
14 17.9 FREE FLOW
38 26.7 FOR VALVE
12 49.4
FT 267/6
PRINT 34 69.9
115
QUIT
Kv GRAPHIC Knob turns Type 18 Type 14 Type 38 Type 12 Type 03 Type 60
FOR VALVE 1 0.39
FT 280/2 2 0.72 2.68 0.82 1.9 3.09 2.68
3 1.11 4.12 1.94 3.7 4.33 4.64
4 1.48 5.24 2.89 5.6 5.85 6.39
5 2.23 5.71 3.71 6.8 6.49 7.05
6 3.23 4.6 8.5
7 5.07 10
8 9.73 11.8
9 17.5
Type 18 20
Type 14
Type 38 18
Type 12
Type 03
16
Type 60
14

12
HOME
10
8
INTRODUCTION
6
4
VALVES INDEX
2
0
1 2 3 4 5 6 7 8 9
Knob turns
FIT IN WINDOW
LAST VIEW
PRINT
116
QUIT
Knob turns Type 14 Type 38 Type 12 Type 03 Type 60 Kv GRAPHIC
1 FOR VALVE
2 2.47 0.62 1.85 2.51 1.03 FT 280/5
3 4 1.85 3.52 4.15 2.23
4 4.95 2.9 5.15 5.54 3.4
5 5.24 3.5 6.64 6.18 4.45
6 4.3 7.59
7 5 9.28
8 8.7 11.3
9 16.29
Type 14 18
Type 38
Type 12
16
Type 03
Type 60
14
12
HOME
10
INTRODUCTION
6
4
VALVES INDEX
0
1 2 3 4 5 6 7 8 9
Knob turns
Type Kv Kv FACTOR
FIT IN WINDOW
14 6.8 FREE FLOW
38 13.15 FOR VALVE
12 28.45
03 7.21
FT 280/5
60 8.25
LAST VIEW
PRINT
117
QUIT
Kv FACTOR Knob turns Fattore Kv
FOR VALVE 1 0.0087
FT 281/2 2 0.087
3 0.152
4 0.248
5 0.394
6 0.493
7 0.574
8 0.641
9 0.7
10 0.92
11 1.152
1.4
1.2
1
HOME
0.8
INTRODUCTION
0.6
VALVES INDEX
0.4
0.2
0
1 2 3 4 5 6 7 8 9 10 11
FIT IN WINDOW Knob turns
LAST VIEW
PRINT
118
QUIT
Knob turns Fattore Kv Kv FACTOR
1 0.012 FOR VALVE
2 0.087 FT 281/5
3 0.152
4 0.248
5 0.394
6 0.493
7 0.571
8 0.641
9 0.7
10 0.912
11 1.146
1.4
1.2
1
HOME
0.8
INTRODUCTION
0.6
VALVES INDEX
0.4
0.2
0
1 2 3 4 5 6 7 8 9 10 11
FIT IN WINDOW Knob turns
Type Kv Kv FACTOR
LAST VIEW FREE FLOW
03 5.58
FOR VALVE
FT 281/5
PRINT
119
QUIT
O - RING
ACCORDING
TO-ANGLO-AMERICAN
STANDARDS
Ref. n. code O-Ring sizes Ref. n. code O-Ring sizes

nd 1 nd 2 A n ext. nd 1 nd 2 A n ext.
OR 2007 004 1.78 1.78 5.34 OR 130 – 22.22 2.62 27.46

OR 2010 005 2.57 1.78 6.13 OR 3093 119 23.47 2.62 28.71
OR 2012 006 2.90 1.78 6.46 OR 132 – 23.81 2.62 29.05
OR 2015 007 3.69 1.78 7.25 OR 3100 120 25.07 2.62 30.31
OR 2018 008 4.48 1.78 8.04 OR 3106 121 26.65 2.62 31.89
OR 2021 009 5.28 1.78 8.84 OR 3112 122 28.25 2.62 33.49
OR 2025 010 6.07 1.78 9.63 OR 3118 123 29.82 2.62 35.06
OR 106 – 6.75 1.78 10.31 OR 3125 124 31.42 2.62 36.66
OR 2031 011 7.66 1.78 11.22 OR 3131 125 32.99 2.62 38.23
OR 108 – 8.73 1.78 12.29 OR 3137 126 34.60 2.62 39.84
OR 2037 012 9.25 1.78 12.81 OR 3143 127 36.14 2.62 41.38
OR 2043 013 10.82 1.78 14.38 OR 3150 128 37.77 2.62 43.01
OR 114 – 11.11 1.78 14.67 OR 3156 129 39.34 2.62 44.58
OR 2050 014 12.42 1.78 15.98 OR 3162 130 40.95 2.62 46.19
OR 2056 015 14.00 1.78 17.56 OR 3168 131 42.52 2.62 47.76
OR 2062 016 15.60 1.78 19.16 OR 3175 132 44.12 2.62 49.36
OR 2068 017 17.17 1.78 20.73 OR 3181 133 45.69 2.62 50.93
HOME OR 2075 018 18.77 1.78 22.33 OR 3187 134 47.30 2.62 52.54
OR 2081 019 20.35 1.78 23.91 OR 3193 135 48.89 2.62 54.13
OR 2087 020 21.95 1.78 25.51 OR 3200 136 50.47 2.62 55.71
OR 2093 021 23.52 1.78 27.08 OR 4028 203 7.51 3.53 14.57
OR 2100 022 25.12 1.78 28.68 OR 4036 204 9.12 3.53 16.18
OR 2106 023 26.70 1.78 30.26 OR 4050 206 12.29 3.53 19.35
OR 2112 024 28.30 1.78 31.86 OR 4055 207 13.87 3.53 20.93
INTRODUCTION OR 2118 025 29.87 1.78 33.43 OR 4061 208 15.47 3.53 22.53
OR 2125 026 31.47 1.78 35.03 OR 4067 209 17.04 3.53 24.10
OR 2131 027 33.05 1.78 36.61 OR 4075 210 18.64 3.53 25.70
OR 2137 028 34.65 1.78 38.21 OR 4081 211 20.22 3.53 27.28
OR 2150 029 37.82 1.78 41.38 OR 4087 212 21.82 3.53 28.88
OR 2162 030 41.00 1.78 44.56 OR 4093 213 23.40 3.53 30.46
OR 2175 031 44.17 1.78 47.73 OR 4100 214 24.99 3.53 32.05
VALVES INDEX OR 2187 032 47.35 1.78 50.91 OR 134 – 25.80 3.53 32.86
OR 2200 033 50.52 1.78 54.08 OR 4106 215 26.58 3.53 33.64
OR 2212 034 53.70 1.78 57.26 OR 4112 216 28.17 3.53 35.23
OR 2224 035 56.87 1.78 60.43 OR 4118 217 29.75 3.53 36.81
OR 2237 036 60.05 1.78 63.61 OR 4125 218 31.34 3.53 38.40
OR 2250 037 63.22 1.78 66.78 OR 4131 219 32.93 3.53 39.99
OR 2262 038 66.40 1.78 69.96 OR 4137 220 34.52 3.53 41.58
OR 2275 039 69.57 1.78 73.13 OR 4143 221 36.10 3.53 43.16
OR 2287 040 72.75 1.78 76.31 OR 4150 222 37.69 3.53 44.75
OR 3021 107 5.23 2.62 10.47 OR 144 – 39.69 3.53 46.75
OR 3024 108 6.02 2.62 11.26 OR 4162 223 40.86 3.53 47.92
OR 3030 109 7.59 2.62 12.83 OR 146 – 41.28 3.53 48.34
OR 109 – 9.13 2.62 12.83 OR 147 – 42.86 3.53 49.92
OR 3037 110 9.19 2.62 14.43 OR 4175 224 44.04 3.53 51.10
OR 112 – 9.92 2.62 15.16 OR 149 – 44.45 3.53 51.51
OR 3043 111 10.78 2.62 16.02 OR 150 – 46.04 3.53 53.10
FIT IN WINDOW OR 115 – 11.91 2.62 17.15 OR 4187 225 47.22 3.53 54.28
OR 3050 112 12.37 2.62 17.61 OR 152 – 47.63 3.53 54.69
OR 117 – 13.10 2.62 18.34 OR 153 – 49.21 3.53 56.27
OR 3056 113 13.95 2.62 19.19 OR 4200 226 50.39 3.53 57.45
OR 119 – 15.08 2.62 20.32 OR 155 – 50.80 3.53 57.86
OR 3062 114 15.54 2.62 20.78 OR 156 – 52.39 3.53 59.45
LAST VIEW OR 121 – 15.88 2.62 21.12 OR 4212 227 53.57 3.53 60.63
OR 3068 115 17.13 2.62 22.37 OR 158 – 53.98 3.53 61.04
OR 123 – 17.86 2.62 23.10 OR 159 – 55.56 3.53 62.62
OR 3075 116 18.72 2.62 23.96 OR 4225 228 56.74 3.53 63.80
OR 3081 117 20.24 2.62 25.48 OR 161 – 57.15 3.53 64.21
OR 128 – 20.63 2.62 25.87 OR 162 – 58.74 3.53 65.80
OR 3087 118 21.89 2.62 27.24 OR 4237 229 59.92 3.53 66.98
PRINT
QUIT
HOME
INTRODUCTION
VALVES INDEX
FIT IN WINDOW
LAST VIEW
EDIZIONE
2001
EDITION
PRINT
2001
QUIT
SALES ORGANIZATION
ITALIA ESTERO
ALESSANDRIA AUSTRALIA
ANCONA AUSTRIA
AOSTA BELGIO
AREZZO BRASILE
ASCOLI PICENO CINA
ASTI CIPRO
BARI COLOMBIA
BELLUNO COREA
BERGAMO DANIMARCA
BOLOGNA EGITTO
BOLZANO FINLANDIA
BRESCIA FRANCIA
CAGLIARI GERMANIA
CAMPOBASSO GRECIA
CASERTA INDONESIA
CATANIA INGHILTERRA
CHIETI ISRAELE
COMO NORVEGIA
COSENZA NUOVA ZELANDA
CREMONA OLANDA
CUNEO PORTOGALLO
FERRARA REPUBBLICA CECA
FIRENZE SINGAPORE
FORLÌ SLOVENIA
FROSINONE SOUTH AFRICA
GENOVA SPAGNA
LA SPEZIA SVEZIA
LATINA SVIZZERA
LECCE TAIWAN
HOME LIVORNO TURCHIA
LUCCA U.S.A.
MACERATA
MANTOVA
MASSA CARRARA
MATERA
MILANO
MODENA
INTRODUCTION NAPOLI
PADOVA
PALERMO
PARMA
PAVIA
PERUGIA
PESARO
PIACENZA
VALVES INDEX PISA
PISTOIA
PORDENONE
RAVENNA
REGGIO EMILIA
ROMA
ROVIGO
SAVONA
SIENA
SONDRIO
TERAMO
TORINO
TRENTO
TREVISO
TRIESTE
UDINE
VARESE
FIT IN WINDOW VENEZIA
VERCELLI
VERONA
VICENZA
VITERBO
F.lli Tognella S.p .A.
LAST VIEW COMPONENTI OLEODINAMICI PNEUMATICI
21019 Somma Lombardo (VA)

Italy
Via Goito, 60
Tel. 0331/988411
Telefax 0331/988499
PRINT e-mail tognella@tognella.it
http//www.tognella.it
QUIT

Tognella Valve

Uploaded by

Copyright:

Available Formats

Tognella Valve

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tognella Valve

Uploaded by

Copyright:

Available Formats

GB-TognellaxCD 20/08/2001 11:55 Pagina 1

LAST VIEW F.LLI TOGNELLA S.p.A.

Drawings and text

The F.lli Tognella SpA

“TECHNOLOGY IS FIRMLY ROOTED IN THE PAST,

The “F.lli Tognella”, attentive and sensitive to changes, to different

Forty years and over, but it doesn’t show

FUNCTION 2 = Double-acting needle control

OPTIONAL G = Panel mounting kit

IN LINE NEEDLE VALVES

MATERIALS Body 9 s Mn Pb 23 - UNI 5105

HOME EXAMPLE FOR Accessories on request

Stainl. steel FT 2257/2 38 G – mp

CODE Type A B C D E F F1 G H CH Weight kg

18 1/8”G 8.5 38 59 64 22 40 13.5 M17x1 16 0.110

14 1/4”G 12.5 49 71 78 27 50 17 M20x1 20 0.200

12 1/2”G 15.5 68 97 107 38 80 21 M30x1.5 30 0.600

34 3/4”G 17 86 120.5 132.5 47 100 26.5 M40x1.5 40 1.250

114 1 1/4”G 22 120 156.5 172.5 58 120 35 M50x1.5 55 3.000

112 1 1/2”G 24 134 167 181 58 120 35 M55x2 65 4.217

200 2”G 27 150 188 202 85 / 44 M65x2 75 7.300

Stainl. steel FT 2258/2 12 G – mp

Type A B C C1 D E F F1 G H CH Weight kg CODE

18 1/8”G 8.5 19 20 71 76 22 40 14.5 M17x1 16 0.108

38 3/8”G 12.5 29.5 31.5 101.5 110.5 33 70 19.5 M25x1.5 25 0.360

12 1/2”G 15.5 35 37 117 127 38 80 21 M30x1.5 30 0.580

100 1”G 20 53 56 182.8 198.8 58 120 35 M50x1.5 50 2.500

18 0.12 400 1600 -20°/+100° 25

14 0.19 400 1600 -20°/+100° 25

38 0.39 400 1600 -20°/+100° 25

12 0.68 400 1600 -20°/+100° 25

34 1.13 400 1600 -20°/+100° 25

100 2.09 320 1300 -20°/+100° 25

114 2.09 320 1300 -20°/+100° 25

112 3.14 320 1300 -20°/+100° 25

200 4.91 320 1300 -20°/+100° 25

FT 257/2-FT 258/2-18 FT 257/2-FT 258/2-14

PRINT FT 257/2-FT 258/2-38

FT 257/2-FT 258/2-12 FT 257/2-FT 258/2-34

MATERIALS Body 9 s Mn Pb 23 - UNI 5105

Stainl. steel FT 2257/5 34 G V mp

CODE Type A B C D E F F1 G H CH Weight kg

14 1/4”G 12.5 66 71 78 27 50 17 M20x1 20 0.250

12 1/2”G 15.5 94.5 97 107 38 80 21 M30x1.5 30 0.750

34 3/4”G 17 115 120.5 132.5 47 100 26.5 M40x1.5 40 1.600

114 1 1/4”G 22 157 156.5 172.5 58 120 35 M50x1.5 55 3.750

112 1 1/2”G 24 190 167 181 58 120 35 M55x2 65 5.760

200 2”G 27 228 188 202 85 – 44 M65x2 75 10.000

14 0.19 400 1600 -20°/+100° 25

38 0.39 400 1600 -20°/+100° 25

12 0.68 400 1600 -20°/+100° 25

34 1.13 400 1600 -20°/+100° 25

100 2.09 320 1300 -20°/+100° 25

114 2.09 320 1300 -20°/+100° 25

112 3.14 320 1300 -20°/+100° 25

200 4.91 320 1300 -20°/+100° 25

PRINT FT 257/5-18 FT 257/5-14

PRINT FT 257/5-112 FT 257/5-200

SERIE FT 257 - FT 258

3° Svitare la vite (2)