Haier Haier: HW-12C03 HW-12HA03 HW-12C03 HW-12HA03

Haier
HW-12C03 HW-12HA03
Cabinet type air conditioner
Service Manual
Contents.
1 PRODUCT CODE ILLUMINATION
AND SERIES INTRODUCTION........................... 3
1
2. PRRODUCT TECHNICAL PARAMETER............... 4
SPECIFICATION................................ 16
3.PRODUCT SPECIFICATION..................................
4.MAIN COMPONENTS AND ACCESSORIES

NAME,.DIMENTION AND FUNTION ................... 18
5.KNOCK-DOWN DRAWING
AND LIST OF COMPONENT...................................26
6.MICROCOMPUTER CONTROLING.......................60
77.THE FUNCTION OF ELECTRIC

.THE FUNCTION OF ELECTRIC CONTROL INTRODUCTION...................
CONTROL INTRODUCTION ................................
71
9. 8..WIRING DIAGRAM .............................................
78
9.MAINTENANCE ANDTROUBLE SHOOTING.......
82
10. SYSTEM FLOW CHART......................................
90
11INSTALLATION AND REPAIRING........................
98
Features
High efficiency for saving energy
Quickly adjusting the temperature
Lower noise
Haier Group
0010543492
Downloaded from www.Manualslib.com manuals search engine
HAIER
Window air conditioner
Technical manual
Machine Model No.:
HW-07CA03, HW-07HA03, HW-07CA12, HW-09C03

HW-09CA12, HW-09CC03, HW-09CD03, HW-09CE03,
HW-09HA03, AW072AAAAA, AW094AAMBA
HW-12C03, HW-12C13, HW-12C12, HW-12EA03,
HW-12EA04, HW-12HA03, HW-12HA04, AW124AAMBA
AW122AAACA, AW122AAMCA, HW-18CA13, EA-1990W
HW-18CC03, HW-18CE03, HW-18HA03, HW-18CB03,
AW182AKMBA, HW-24CA03, HW-24C03, HW-24CA13,
AW244AAMAA, AW244AAMAB, AW182AAAAB

CATALOGUE
1 PRODUCT CODE ILLUMINATION AND SERIES INTRODUCTION......................1
2 PRRODUCT TECHNICAL PARAMETER...............................................................2
3 PRODUCT SPECIFICATION..................................................................................3
,
4 MAIN COMPONENTS AND ACCESSORIES NAME,
DIMENTION AND FUNTION .............................................4
5 KNOCK-DOWN DRAWING AND LIST OF COMPONENT.....................................5
6 MICROCOMPUTER CONTROLING.......................................................................6
7 THE FUNCTION OF ELECTRIC CONTROL INTRODUCTION .............................7
8 WIRING DIAGRAM ................................................................................................8
9 MAINTENANCE ANDTROUBLE SHOOTING........................................................9
10 SYSTEM FLOW CHART.....................................................................................10
11 INSTALLATION AND REPAIRING......................................................................11

1 PRODUCT CODE ILLUMINATION AND SERIES INTRODUCTION
a model code rule description
1.1 Model identification:

H W
A B
C D E F
A: Abbreviation of Haier
B: Abbreviation of Window
C: Nominal cooling capacity(BTU/h) with the first two numbers based on one
thousand unit
D: Function code
C-Cooling only
H-Heating pump
E-Electric aided heating
E: Developing sequence
F: The type of power supply
A W
A B
C D E F G H I
A: Abbreviation of air conditioner
B: Abbreviation of window
C: Nominal cooling capacity(BTU/h)with the first two numbers based on one
thousand unit
D: The type of power supply
E: structural feature
F: Appearance feature
G: The kind of referigerant
H: Frequency
I: Type of climate
Examples:
HW-07CA03
-It represents window air conditioner. Cooling capacity is 7000
BTU/h and the power supply is 220~230V/50Hz.
AW122AAACA
--It represents window air conditioner . Cooling capacity is 12000
BTU/h and the power supply is 220~240V/50Hz. It is whole unit.
The case used is the common case with large arc inlet bar. The
proper climate type is T1.
1
2 PRRODUCT TECHNICAL PARAMETER
The manufacture reserves the right to change any product specifications without notice.
HW-07CA03 HW-07HA03
Item UNIT AW072AAMAA AW072AAAAA
Cooling capacity BTU/h 7000 7000
Heating capacity BTU/h / 7000
Power supply 1PH,220V~,50Hz 1PH,220V~, 50Hz
Power input W 777 820
Cooling Running current A 3.8 4.5
EER BTU/ (hW) 9.01 8.54
Power input W / 720
Heating Running current A / 4.0
COP BTU/(hW) / 9.72
Indoor side dB(A) 50 50
Sound Level
Outdoor side dB(A) / /
Height 340 340
Case Width 520 520
Depth 570 570
Height 455 455
Packaging Width
610 610
dimensions Depth
620 620
Net kg 34 34
Weight
Gross kg 38 38
Type Rotary Rotary
Model QX-13 QX-14(F)
Compressor Running cap. for
comp. uF 17.5 20
Starting method PSC PSC
Heating side MPa 2.65 2.65
Pressure
Cooling side MPa 0.65 2.65
Model R22 R22
Refrigerant
charge kg 0.65 0.7
indoor unit Acentric fan Acentric fan
Type
outdoor unit Axial fan Axial fan
Fan Fan speed Hi r/min 870 50 870 50
Lo r/min 720 50 720 50
Running capacitor uF 2.5uF/450V 2.5uF/450V
Air direction control 4-way*and auto swing 4-way*and auto swing
Air volume m3 /hr 300 300
Moisture removal m3 /hr 0.9X10 -3 0.9X10 -3
Attestation CE CE
Compressor oil charge ml
Exchanging pipe type/diameter mm evaporator: 7condenser 9 evaporator: 7 condenser 9
Fin factor / /
Fin material Hydrophile aluminum foil Hydrophile aluminum foil
Case material Electrical zinc board Electrical zinc board
Type of capillary TP2 Y 2.7X0.5 TP2 Y 2.7X0.5
Total area of evaporator mm 2 2.91 2.91
Total area of condenser mm 2 4.52 4.52
2
Item UNIT HW-09C03 HW-09CD03

Heating capacity BTU/h / /
EER BTU/ (hW) 9.47 9.47
Power input W / /
Heating Running current A / /
COP BTU/(hW) / /
Sound Level
Height 340 340
Case Width 520 520
Depth 570 570
Height 460 460
Packaging Width
610 610
dimensions Depth
640 640
Net kg 36 36
Weight
Gross kg 40 40
Type Rotary Rotary
Model QX-16A QX-17A020
comp. uF 20Mf/460VAC 30Mf/460VAC
Pressure
Model R22 R22
Refrigerant
charge kg 0.73 0.73
Type
Lo r/min 800 30 800 30
Attestation CE CE
Compressor oil charge ml 350
Exchanging pipe type/diameter mm evaporator: 7 condenser 9 evaporator: 7 condenser 9
Fin factor / /
3
Item UNIT HW-09CE03 HW-09HA03

EER BTU/ (hW) 9.47 7.76
Power input W / 1100
Heating Running current A / 5.3
COP BTU/(hW) /
Sound Level
Height 340 340
Case Width 520 520
Depth 570 570
Height 455 455
Packaging Width
610 610
dimensions Depth
640 640
Net kg 36 36
Weight
Gross kg 40 40
Type Rotary Rotary
Model QX-17D020 QX-184A020
comp. uF
Starting method
Pressure
Model R22 R22
Refrigerant
charge kg 0.73 0.88
Type
Lo r/min 800 30 800 30
Attestation CE CE
Exchanging pipe type/diameter mm evaporator: 7 condenser 9 evaporator: 7 condensor 9
Fin factor / /
4
Item UNIT HW-12C03 AW122AAMCA HW-12C13 AW124AAMBA

EER BTU/ (hW) 8.57 8.57
Power input W / /
COP BTU/(hW) / /
Sound Level
Outdoor side dB(A) 62 /
Height 400 400
Case Width 560 560
Depth 650 650
Height 515 515
Packaging Width
635 635
dimensions Depth
740 740
Net kg 48 48
Weight
Gross kg 53 53
Type Rotary Rotary
Model QX-23A020 48R342AS-574
Starting method CSR

Pressure
Model R22 R22
Refrigerant
charge kg 0.9 0.85
Type
Lo r/min 710 45 710 45
Running capacitor uF 2.5/450VAC 2.5/450VAC
Attestation CE
Exchanging pipe type/diameter mm evaporator: 7 condensor 9 evaporator: 7 condensor 9
Fin factor / /
5
Item UNIT HW-12HA04 HW-12eA04

Heating capacity BTU/h 11300 11300
EER BTU/ (hW) 8.18 8.18
Heating Running current A 5.8 5.8
COP BTU/(hW) 9.42 9.42
Sound Level
Outdoor side dB(A) 62 62
Height 400 400
Case Width 560 560
Depth 650 650
Height 515 515
Packaging Width
635 635
dimensions Depth
740 740
Net kg 50 50
Weight
Gross kg 54 54
Type Rotary Rotary
Model QX-23U QX-23U
Starting method CSR CSR

Pressure
Model R22 R22
Refrigerant
charge kg 0.9 0.9
Type
Lo r/min 810 30 810 30
Running capacitor uF 2.5/450VAC 2.5/450VAC
Attestation
Fin factor / /
6
Item UNIT AW094AAMBA AW122AAMBA

Cooling capacity BTU/h 11300
Heating capacity BTU/h 11300
Power supply 1PH,220V~, 50Hz
Power input W 1380
Cooling Running current A 6.6
EER BTU/ (hW) 8.18
Power input W 1200
Heating Running current A 5.8
COP BTU/(hW) 9.42
Indoor side dB(A) 53
Sound Level
Outdoor side dB(A) 62
Height 400
Case Width 560
Depth 650
Height 515
Packaging Width
635
dimensions Depth
740
Net kg 50
Weight
Gross kg 54
Type Rotary
Model QX-23U
comp. uF 20Mf/450VAC
Starting method CSR

Heating side MPa 2.65
Pressure
Cooling side MPa 2.65
Model R22
Refrigerant
charge kg 0.9
indoor unit Acentric fan
Type
outdoor unit Axial fan
Fan Fan speed Hi r/min 880 30
Lo r/min 810 30
Running capacitor uF 2.5/450VAC
Air direction control 4-way*and auto swing
Air volume m3 /hr 600
Moisture removal m3 /hr 1.68X10 -3
Attestation
Exchanging pipe type/diameter mm evaporator: 7 condenser 9
Fin factor /
Fin material Hydrophile aluminum foil
Case material Electrical zinc board
Type of capillary TP2 M 2.7X0.5
Total area of evaporator mm 2 4.01
Total area of condenser mm 2 5.95
7
HW-18CC03 EA-1990W
Item UNIT AW182AKMBA HW-18CE03
Cooling Running current A 11. 0 11. 0
EER BTU/ (hW) 8.57 8.57
Power input W / /
COP BTU/(hW) / /
Sound Level
Height 515 515
Case Width 735 735
Depth 810 810
Height
Packaging Width
dimensions Depth
Net kg 75 75
Weight
Gross kg 79 79
Type Piston Piston
Model Bristo1H24B24QAB Bristo1 H24B24QAB
comp. uF 35uf/450VAC

Pressure
Model R22 R22
Refrigerant
charge kg
Type
Lo r/min 740 50 740 50
Running capacitor uF 5uF/450V 5uF/450V
Attestation
Fin factor / /
Type of capillary
8
Item UNIT HW-18HA03 HW-18CA13

Heating capacity BTU/h 18000 /
Cooling Running current A 11. 0 11. 0
EER BTU/ (hW) 8.57 8.18
Power input W 1950 /
Heating Running current A 9.23 /
COP BTU/(hW) 9.23 /
Sound Level
Outdoor side dB(A) / 62
Height 515 428
Case Width 735 660
Depth 810 677
Height 550
Packaging Width
780
dimensions Depth
790
Net kg 75 70
Weight
Gross kg 79 74
Type Rotary Rotary
Model PH330X2CS-4KU1 SHZ73LA2GU
Starting method PSC

Pressure
Model R22 R22
Refrigerant
charge kg 0.99 0.98
Type
Lo r/min 830 50 710 45
Running capacitor uF 5uF/450V 2.5uF/450V
Attestation CE UL
Fin factor / /
Type of capillary
Total area of evaporator mm 2
Total area of condenser mm 2
9
Item UNIT AW222AAAAA AW222AAMAA

Heating capacity BTU/h 22000 22000
Power input W 2900
Cooling Running current A 14.7
EER BTU/ (hW) 7.586
Power input W 2750
Heating Running current A 13.9
COP BTU/(hW) 8.0
Indoor side dB(A) 58
Sound Level
Height 515
Case Width 735
Depth 810
Height 560
Packaging Width
761
dimensions Depth
945
Net kg 78
Weight
Gross kg 83
Type Piston
Model Bristo 1H23B32QABKA
comp. uF 45Mf/440VAC
Starting method 88-1-8Mf/250 VAC

Heating side MPa 2.65
Pressure
Cooling side MPa 2.65
Model R22
Refrigerant
charge kg 1.8
indoor unit Acentric fan
Type
outdoor unit Axial fan
Fan Fan speed Hi r/min 880 30
Lo r/min 810 30
Running capacitor uF 2.5/450VAC
Attestation CE CE
Exchanging pipe type/diameter mm evaporator: 7condenser 9 evaporator: 7 condenser 9
Fin factor / /
Type of capillary TP2 M 2.7X0.5 TP2 M 2.7X0.5
10
2. product specifications
Model HW-24C03 HW-24CA03 HW-24CA13 AW222AAAAA

Item
Cooling capacity BTU/h 24000 24000 24000 22000
Power supply W 1PH ,220V~,50Hz 1PH ,220V~,50Hz 1PH ,220V~,50Hz 1PH,220V~,50Hz
Power input W 3100 3100 2900
cooling Running current A 15.8 15.8 14.7

EER BTU/(h w) 8.5 7.8 7.58
Power input W 2750
heating Running current A 13.9
COP BTU/(h w) 8
Sound Indoor unit dB(A) 61/57/55 61/57/55 61/57/55 58

level Outdoor unit dB(A) 66 66 66 66
Packaging Indoor unit mm 945x761x560 945x761x560 945x761x560 945x761x560

dimensions Outdoor unit mm
Indoor unit kg 78(net)83(gross) 78(net)83(gross) 78(net)83(gross) 78(net)83(gross)
weight
Outdoor unit kg
Compressor model H23B32QABKA H23B32QABKA H23B32QABKA
Overload protector Built-in Built-in Built-in
Running capacitor for comp. 45uf/440VAC 45uf/440VAC 45uf/440VAC
Starting method PSC PSC PSC
Refrigerant R22 R22 R22 R22
Refrigerant charge g 1800 1800 1800
Type of Indoor unit Acentric fan Acentric fan Acentric fan Acentric fan
fan unit Outdoor unit Axial fan Axial fan Axial fan Axial fan
Fan Indoor unit r/min 850/780/710 850/780/710 850/780/710 870
speed Outdoor unit r/min 850/780/710 850/780/710 850/780/710
Air volume m3/h 950 950 950 720
-3 -3 -3
Moisture removal 3
m /h 2.4x10 2.4x10 2.4x10 2.4x10 -3
Piping Liquid pipe mm
dimension Gas pipe mm
Piping connection
11
Model AW242AAAAB AW248AAAAA AW248AQAAA

Item
Cooling capacity BTU/h 24000 24000 24000
Heating capacity BTU/h 24000 24000 24000
Power supply W 1PH ,220V~,50Hz 1PH ,240V~,50Hz 1PH ,240V~,50Hz
cooling Running current A 14.7 14.7
EER BTU/(h w) 8.13 8.13
heating Running current A 13.9 13.9
COP BTU/(h w) 9.23 9.23
Sound Indoor unit dB(A) 61/57/55 58 58
level Outdoor unit dB(A) 66 66 66
Packaging Indoor unit mm 945x761x560 945x761x560 945x761x560

Indoor unit kg 78(net)83(gross) 78(net)83(gross) 78(net)83(gross)
weight
Outdoor unit kg
Compressor model H23B32QABKA H23B32QABKA
Overload protector Built-in Built-in
Running capacitor for comp. 45uf/440VAC 45uf/440VAC
Refrigerant R22 R22
Refrigerant charge g 1800 1800 1800
Type of Indoor unit Acentric fan Acentric fan Acentric fan

fan unit Outdoor unit Axial fan Axial fan Axial fan
Fan Indoor unit r/min 850/780/710 870 870
speed Outdoor unit r/min 820
3
Air volume m /h 950 720 720
Moisture removal m3/h 2.4x10 -3 2.4x10 -3 2.4x10 -3
Piping
connection
12
Model AW222AA AW244AA AW244AAM AW248AAABA

Item MAA MBA AB
Cooling capacity BTU/h 22000 24000 24000 24000
Power supply W 1PH ,220V~,50Hz 1PH ,220V~,50Hz 1PH ,220V~,50Hz 1PH,220V~,50Hz
Power input W
cooling Running current A
EER BTU/(h w)
Power input W
heating Running current A
COP BTU/(h w)
Sound Indoor unit dB(A) 61/57/55 61/57/55 61/57/55 61/57/55
level Outdoor unit dB(A) 66 66 66 66
Packaging Indoor unit mm 945x761x560 945x761x560 945x761x560 945x761x560

Indoor unit kg 78(net)83(gross) 78(net)83(gross) 78(net)83(gross) 78(net)83(gross)
weight
Outdoor unit kg
Compressor model
Overload protector
Running capacitor for comp.
Starting method
Refrigerant
Refrigerant charge g
Type of Indoor unit Acentric fan Acentric fan Acentric fan Acentric fan
fan unit Outdoor unit Axial fan Axial fan Axial fan Axial fan
Fan Indoor unit r/min 850/780/710 850/780/710 850/780/710 850/780/710
Speed Outdoor unit r/min 820 820 820 820
Air volume m3/h 950 950 950 950
-3 -3 -3
Moisture removal 3
m /h 2.4x10 2.4x10 2.4x10 2.4x10 -3
Piping connection
13
3 PRODUCT SPECIFICATION
HW-09CC03
HW-07CA03 HW-09C03
HW-07HA03 HW-07CA12 HW-09CA12
AW072AAAAA KC-25(JF)
Structural Whole style air Whole style air Whole style air
feature conditioner conditioner conditioner
Cooling
capacity 7000BTU/h 7000BTU/h 9000BTU/h
voltage 220V 220V 220V
Type of Window air Window air Window air conditioner
product conditioner series conditioner series series
Appearance Large arc Flat board Flat board
feature
Attestation
remote
refrigerant R22 R22 R22
Climate type T1 T1 T1
dimensions 340x520x550mm 340x520x550mm 340x520x570mm
package
Box up
document No No No
HW-09CD03 HW-12C03 HW-12EA03

HW-09CE03 HW-12C13 HW-12HA03
HW-12C12 HW-12EA04 HW-18CA13
HW-09HA03 HW-18CB03
AW094AAAMBA HW-12HA04 AW122AAMCA
AW124AAMBA AW122AAACA
Cooling
Appearance
feature Large arc Large arc Large arc
Attestation
remote
package
Box up
document No No No
14
HW-18CE03
HW-18CC03
HW-18HA03 HW-24C03 HW-24CA03 AW222AAAAA
EA-1990W HW-24CA13 AW222AAMAA
AW182AKMBA
Cooling
Appearance
feature Large arc Large arc Large arc
Attestation
remote
package
Box up
document No No No
AW182AAAAB AW244AAMBA AW244AAMAB AW052AAAAB
Cooling
Appearance
feature Large arc Large arc HAC
Attestation
remote
package
Box up
document No No No
15
,
4 MAIN COMPONENTS AND ACCESSORIES NAME, DEMENTION AND FUNTION
Parts Name
Front panel
Air inlet(indoor side)
EA-1990W
HW-18CC03 Air outlet (indoor side )
HW-24C03 Air inlet (outdoor side)
AW242AQAAB
Haier
1
2
Mode selection switch
3
Mode s
Mode s
Mode s
Mode s
Mode s
Operation panel
Mode
es
s
Mod
Auto swing switch
Ventilation lever
Thermostat switch
Front panel
HW-18CE03 Air outlet (indoor side )

HW-24CA03 Air inlet (outdoor side)
HW-18CA04 Haier
1
2 3
Mode s
Mode s
Mode s
Operation panel
HW-24C13
Mode s Mode
s
Mode
es
s
Mod
Operation panel cover

AW222AAMAA
Auto swing switch
Ventilation lever
Thermostat switch
Air filter
Front panel
HW-18HA03
Air outlet (indoor side )
HW-24H03 Air inlet (outdoor side)
AW222AAAAA Mode selection switch
Operation panel
Haier Mode selection switch
2 3
1 Mode s
Mode s Mode s
Mode s Mode s
Mode
es
s
Mod

Auto swing switch
Ventilation lever
Thermostat switch
Air filter
16
Parts Name
Air outlet Air outlet
Air inlet Operation

panel
Front cover
Door
Operation panel
Air inlet Front cover Door
HW-09C03 HW-08C12
HW-09C04 HW-09C12 HW-07CA03 HW-07HA03
HW-07CA12 HW-08C13 HW-09CE03 HW-09HA03
Front panel

Air inlet (outdoor side)
Operation panel

Fresh air knob
Air filter
HW-12C03 HW-12C04 HW-12C12
HW-12H03 HW-10C12 HW-12C13
Front panel

Operation panel
Fresh air knob

Air filter
HW-18C03(T3) HW-18CB03 HW-18C13(T3) HW-18CA13
17
Parts Name
Air outlet
Air inlet
Operation panel
Front cover Door
HW-07CA12 HW-08C12 HW-09C03

HW-08C13 HW-09C12 HW-09C04
Front panel

Operation panel
Fresh air knob
Air filter
HW-12C03 HW-12C12 HW-12C04 HW-12C13 HW-10C12
Front panel
Air inlet (indoor side)
Air outlet (indoor side)

Operation panel
Fresh air knob

Air filter
HW-18CB03 HW-18C03(T3) HW-18CA13 HW-18C13(T3)
18
2. Parts demension
Net dimention:
A B
C
R
MOEDL A B C
HW-07CA03 AW072AAAAA
HW-07HA03 AW094AAMBA
HW-09CD03 520 570 340
HW-09CE03
HW-09HA03
HW-12C03 AW122AAMCA
HW-12C13 AW122AAACA
HW-12HA04 AW124AAMBA 560 650 400
HW-12eA04
HW-18C13 AW182AKMBA
HW-18CE03 660 738 430
HW-18HA03
HW-18CA13
660 677 428
AW182AAAAB
HW-24CA03 AW242AAAAB
HW-24CA13 AW244AAMAB
AW222AAAAA AW244AAMBA 710 870 460
AW222AAMAA
19
Net mentions:
A B
Model A(mm) B(mm) C(mm)
EA-1990W
660 738 430
HW-18CC03
HW-24C03 700 870 460
A B
C
Model A(mm) B(mm) C(mm)

HW-09C03
HW-09CA12 520 550 340
HW-09C12
20
A B
C
MODEL A B C
AW052AHMAA 420 500 370
21
3 FUNCTION
Description of the parts

For models: HW-09CC03
HW-09CA12
Inlet grating of air Oulet grating of air
Time indicator
Lights up when Timer switch is Operation mode indicator
set on "ON" or "OFF" position. Lights up when compressor starts
running.
Power indicator
Lights up when "ON/OFF"
button on remote controller POWER TIMER OPERATION
is pressed.
For HW-09CA12
WIRELESS REMOTE CONTROL
Emergency switch
Used when remote controller is lost or does not work. This can make unit run
temporarily in Auto temp. mode.
Note: For HW-09CC03, HW-09CD03 the word"OPERATION"is "RUN".
Operation mode indicator

Power indicator
Lights up when compressor starts
Lights up when"ON/OFF" button on running.
remote controller is pressed.
Auxiliary heat indicator Time indicator

AUX. H POWER TIMER OPERATION
Lights up when Auxiliary heat Lights up when Timer
function starts. switch is set on "ON"
or "OFF" position.
ON OFF
Emergency switch
Used when remote controller
For model: HW-12eA03 is lost or does not work. This
HW-12eA04 can make unit run temporarily
in Auto temp. mode.
22
Description of the parts
Machine body
HW-09CD03 HW-12eA03
For models: HW-12CA03 HW-18HB03
HW-12HA03 HW-09CA13
HW-12HA04
Front panel
Air inlet grating(indoor side)
Air outlet (indoor side)

Display panel
Operation cover
Power plug
Air filter
Remote controller
(The signal sending head should be aimed at the signal receiving window
and there should not be blocked between them.)
Display panel
Time indicator
Lights up when Timer switch is
set on "ON" or "OFF" position.
Power indicator Operation mode indicator

Lights up when "ON/OFF"button Lights up when compressor
on remote controller is pressed. starts running.
POWER TIMER OPERATION
Emergency switch
(Used when remote controller is lost or does not work.
This can make unit run temporarily in Auto temp mode.)
HW-12CA03 HW-12HA03
For models: HW-12HA04 HW-18HB03
HW-09CA13 AW124AAMBA
23
10
8
9
11
16 17
7 13 15
14 18
12
19

3
2
1
5
22
6 21 20
23
25
24
24
26
27
28
29
30
50 31
32
33
49
34
48 35
47
36
46
45 37
38
39 51
44 41 40
42
43
56
28
27
23

22 29 30
53
51 50
21 25 55 54
52
17
32
8 24
3 23
18 31
4
1
15
27
16
20 14
38
19
HW-12CA12
39
13
9 11 12
10
41
7
5 44
45 34
6 33
37
40 36
2 43 35
46
42
47
48
49
55
2
1
54

10 49
53
52
11
3 50
48
20
13 12 51
14
4
21
30
22 23 15
16 8 5
24
6
HW-09CB12
25 7
9
46
19
45 47
17
27 16
28 44
30 29
31
35 32
37 36
34 33
41 38 43 42
26
39
40
33
14
12
13
11 15 18
19
17
16

3 8
6 7
2 5 9
4
1
20
10 21
22
25 23
24
26
54
31
27
28
HW-18CC03
29
53 30
31
52 32
51 33
34
50 35
49
36
48
37
47 39 38
40 55
46 41
42
45 43
44
34
14
12
13 15 18 19
58 22
11 17
16 23
21

6 7
3
8 5 24
2
59
1 9 20
26
4
10
27
25
32
57
28
29
HW-18HA03
30
31
32
55 33
34
54
35
53 36
37
52
51 38
50
39
49 40
41 55
48 42
43
47 44
45
46
35
13
12
11
14 49
15

10
9 16
8
17
48
19
7
31 47
18
4 6
33
22
5 21
20
HW-07CA03
23
30
29
28 27 26 45
41
24 44
46
3 40 43
25 39 42
2 38
37
32
1 35
33
36
34
36
13
12
11
17 53
14
10

15
9
8
18 16
47
21
7
19 46
22
4 6
20
25
34
5 23
24
HW-07HA03
50
32
29 42
30 33
31 48
28 41
26 40 51
49
52
3 45
27 44
39
2 43
34
1 38
35
37
36
37
HW-07HA03
35
Downloaded from www.Manualslib.com manuals search engine 38
23 24 25
26 27
17 18 19 20 21 22
28 29 30 31 32
14 16
13 15
12

11 33
10 34
1 2 3 4 9 35
5
6 8 36
7 38
58 37
57 56
55
54
28
53
52 40
39 41
HW-12HA03
59 51
60 50
61
62 49
63
64 42
44 43
45
48
46
47
42 41 40 39 38 37 36
43
44
45
46
47

49
50 48
51 32
33
52 35
61 60 59 58 57 56 54 34
55 53
27
28 31
30
35
29
13 14
HW-12CA03
12 15
4
3 11 16
5
10 17
6
7 18
2 9
1 8
21 23 25
19 26
20 22 24
14 13 12 11 10 9 8 7 6 5 4 3 2 1

15
16
24 23 22 21 17
18
19
20
63
62
36
61
60
59
25 41
42
26
43 45
27 44
46
28
29
47
49
30 31 32 33 34 35 36 37 38 39 40 48
51 50
52 53 54 55 56 57 58
MODEL HW-07CB12
damageable
No Parts'name special No parts(yes or no) Cost price
1 filter 2400134 No
2 knob 1431986 No
3 door 1433981 No
4 bolt 5002302 No
5 spacing reed 1301829 No
6 horizontal blade 1433982 No
7 vertical flap 1436984 No
8 connecting rod 1436985 No
9 front panel 1233352 No
10 main vertical flap 1436983 No
11 curtain 1439989 No
12 left curtain frame 1433987 No
13 top guide 1301840 No
14 case 1301842 No
15 scale 1433993 No
16 cushion for electric box 17341260 No
17 top cover of electric box 1301834 No
18 fan motor 3600235 Yes
19 capacitor clip 1301833 No
20 thermostat 3400186 Yes
21 selecting switch 3400185 No
22 right curtain frame 1433988 No
23 bottom cover of electric box 1301832 No
24 compressor capacitor 3600236 Yes
25 wire 4200173 No
26 left bottom guide 1301841 No
27 water meeting plate 1233351 No
28 evaperator 6400192 No
29 scroll case 1433980 No
30 bolt for scroll case 5002291 No
31 draught partition board 1433990 No
32 front partition board 1433991 No
33 acentric fan 2300093 Yes
34 motor 3000217 Yes
35 rear partition board group 1436992 No
36 axial fan 2300094 No
37 left pipe board of condenser 1301837 No
38 condenser 0400187 No
39 flange bolt nut 5102004 No
40 bolt 5002013 No
41 seal panel 1301839 No
42 right pipe board of condense 1301838 No
43 bolt 5002089 No

44 discharing pipe 21111425 No
45 suction pipe 21111424 No
46 wire holder cover 1431185 No
47 supper-cooling pipe 21111419 No
48 compressor 2000182 Yes
49 capaliary 2611325 No
50 liquid charging pipe of evape 0500600 No
53 cushion rubber 17541299 No
54 sealing pad 17541297 No
55 foot bolt 5002300 No
56 compressor cushion 17341263 No
57 right pipe board of evaporator 13011010 No
58 bolt 5002036 No
59 chassis 13011843 No
60 right-bottom guide 1301919 No
61 left pipe board of evaporator 1301109 No
62 drain elbow 2111057 No
63 partition pad No
64 dert-proof bag 6134083 No
65 top packaging pad 6233231 No
66 packaging box 6066985 No
67 bottom packaging pad 6233232 No
68 packaging box bottom 6066335 No

MODEL HW-07HA03
parts(yes or
No Parts'name special No no) Cost price
1 filter 2400078 No
2 connecting pole 1431469 No
4 panel 1231129 No
5 draught foam 1433483A No
6 thermostat clip 1431074 No
7 evaporator group 0400019 No
8 partition board of evaparate 1101021 No
9 acentric fan group 0300013 Yes
10 worm shell 1233013 No
11 long bracket 1301048 No
12 front cover board 1301051 No
13 rear cover board 1301046 No
14 short bracket 1301054 No
15 defrost thermostat 3400192 Yes
17 upper backstop 1431078 No
18 erect blade 1431079 No
19 lower backstop 1331080A No
20 driving handle 1431148 No
22 selecting switch 3400198 No
23 terminal block 4000082 No
24 synchronous motor 3000012 Yes
25 fan motor capacitor 3600034 Yes
26 compressor capacitor 3600007A Yes
28 wire 4200099 No
29 wire clip 5745016 No
30 knob 1431075 No
31 scale plate 1300758 No
32 ship style switch 3000008 No
33 electric body 1301052 No
35 stop part 1301054 No
37 shock absorbing cushion 17561204 No
38 compressor 200104 No
40 motor 3000011 No

41 four-way valve 2500011 No
42 discharge pipe 21111226 No
43 main capaliary 2611273 No
44 unilateralism valve 2500010 Yes
45 filter 2411023 No
46 rear partition board 1101019 No
47 axial fan 2331018 Yes
48 condenser group 0400020 No
49 charge pipe 1 21111221 No
50 charge pipe 2 21111228 No
52 liquid charging pipe 2111162 No
53 shell cover 1101018 No

MODEL HW-09CB12
damageable
2 rear covergroup 0100054 No
4 rear partition boardgroup 0100055 No
5 charge pipe of condenser 0100580 No
7 supper-cooling pipe group 0500587 No
8 charge pipe 2 of evaperaror 2111162 No
9 suction pipe group 0500603 No
12 liquid charging pipe 2 of evaperaror 0500589 No
13 suction pipe group of evaperaror 0500588 No
14 asynchronic motor 3000255 Yes
16 overload protector 3100140 Yes
20 front cover group 0100814 No
21 front partition board group 0100838 No
22 scroll shell group 0100057 No
23 acentric fan group 0300013 No
24 partition board group of evaperaror 0100058 No
29 synchronic motor 3000272 Yes
30 compressor capacitor 3600131 Yes
32 wire 4200184 No
33 slection switch 3400186 Yes
34 knob 14311192 Yes
35 ship style switch 3400008 Yes
36 panel pad group 0100837 No
38 wind outlet group 0100061 No
39 casing of panel 1231129 No
40 controll door 14311190 No

42 bottom of packaging box 6066030 No
43 packaging pad 6233028 No
44 chassis group 0100839 No
46 pad of eletric box 1733204 No
47 casing 0100836 No
48 upper fixing bar 1301714 No
49 left draught rod 1301712 No
50 right draught rod 1301713 No
52 foam sealed bar 1442885 No
53 bag / No
54 window sealed bar 1434886 No
55 package 6066986 No

MODEL HW09C03
damageable
1 wind inlet bar 1432085 No
2 foam of draught 1733176 No
3 pad of draught 1742691 No
4 blade of wind outtlet bar 1431079 No
5 upper support 1431078 No
6 pad 1742650 No
7 scale 1324671 No
9 upper pad of electric body 1734208 No
11 clip of thermostat 1431074 No
14 partition board group of evaperaror 0100058 No
15 scroll shell 1233013 No
16 acentric fan group 0300013 No
17 pad of scroll shell side 1742196 No
18 pad 1742197 No
19 front cover 1301051 No
22 rear cover 1301046 No
24 right pipe board of condenser 2201026 No
25 bolt nut 5102046 No
27 rear cover group 0100055 No
28 motor 3000013 Yes
29 high perss discharge pipe 2111167 No
30 heat insulation pipe 1756819 No
31 shake absorbtion clay 1755497A No
33 bolt nut 51002004 No
34 clay 1754113 No
37 compressor capacitor 3600034 No
39 relay 3100012 Yes
40 terminal block 4000004 Yes

41 synchronic motor 3000012 No
42 fan motor capacitor 3600007A No
43 wire bundle 4400335 No
45 stop parts 1301054 No
46 guiding wire hood 1751203 No
47 bottom bracket 1431080A Yes
48 knob parts 0700002 Yes
49 thermostat 3200003 No
50 timer 8500001 No
51 pad of eletric box 1733204 No
52 wire 4200004 No
54 door 1432082 No
55 panel frame 1231344 No
57 bolt 4X10TAHC 5002013 No
58 casing 17541470 No
59 shake absorbtion clay 17551345 No
61 fixing board 1301055 No
62 front draught board 1301044 No
63 pad of shell cover 1742184 No
64 filter group 0900020 No
65 flange bolt nut 5102050
66 compressor 2000015

MODEL HW12CA12
damageable
1 filter 2436037 No
3 panel 1231024B No
5 asway switch 3400186 No
6 knob 14311192 No
7 scale plate 13211001 No
9 connecting rod 1431155 No
11 selecting switch 3400186 Yes
13 running capacitor 3600143 Yes
14 wire 4200184 No
17 vertical blade 1431146A No
18 bottom holder 1431080A No
22 draught board 1301100A No
23 scroll shell 1233025B No
24 wind door 1431152 No
25 front partition board 1101031A No
28 asynchrinic motor 3000256 Yes
29 fan motor bracket 1301104 No
36 discharge pipe group 0500581 No
37 charge pipe 1 group 0500580 No
38 liquid charging pipe group 0500584 No
39 left handle 1301105 No

41 right handle 1301106 No
44 wire holder box 14311188 No
46 water meeting plate 0933027B No
47 chassis group 0100845 No
49 bottom plate of packaging box 6066046A No
50 upper fixing bar 1301717 No
51 left pulling rod 1301715 No
52 right pulling rob 1301716 No
53 upper fixied sealing bar 1434889 No
54 foam bottom bar 1442885 No
56 bag / No

MODEL HW-12H03
damageable
1 filter 2436037 No
3 connecting pole 1431155 No
4 panel 1231024 No
5 draught foam 1433157 No
6 thermostat clip 1436177 No
8 drought parts 0100101 No
9 acentric fan group 2331022 Yes
10 worm shell 1233025 No
11 front cover board 1301098 No
12 rear cover board 1301099 No
14 blade axial board 1431145 No
17 erect blade 1431146 No
20 dial 1431148 No
21 earthing block 4000011 No
22 synchronous motor 3000021 Yes
23 ship style switch 2400008 Yes
25 selecting switch 3400198 Yes
26 wire clip 5745106 No
27 wire 4200010 No
32 stop part 1301107 No
34 ground screw 05002033 No
35 compressor group 0200029 Yes
36 pipe group 0500165 No
37 liquid charging pipe 2111443A No
38 supper-cooling pipe 0500162B No
39 condenser group 0400048A No
40 shell cover group 0100095 No
42 rear partition board group 0100098 No
44 motor parts 0100104 Yes

MODEL HW-12HA03
damageable
2 cushion rubber 1754312 No
4 motor 3000037 Yes
8 front cover cushion 1734272 No
10 scroll shell 1233025B No
12 draught door 1301100A No
13 evaporator cushion 1742281 No
14 evaporator 0400030 No
16 bolt 5002093 No
17 guiding rod 1431149A No
18 cushion of electric body 1734442 No
19 cushion of electric body 1742443 No
20 electric body 1301223A No
21 PC plate 0600152 Yes
22 upper bracket 1431078 No
23 vertical blade 1431146A No
24 foundmental board box 1431274 No
25 bottom bracket of wind outler 1431080A No
26 draught foam pad 1742278 No
28 panel 1231340 No
31 wire 4200087 No
35 clip 5701003 No
36 transformer 3800052 Yes
37 fan motor capacitor 3600007A Yes
38 water meeting plate 0933027B No
39 wind door 1431152 No
40 pad of wind door 1742310 No

43 coil of four-way valve 2500038 No
44 four-way valve 2500015 Yes
45 charge pipe 2111449 No
46 discharge pipe group 0500163 No
47 liquid charging pipe 2111443A No
48 bolt nut 5102004 No
50 clip of wire holder cover 17561266 No
51 overload protector 3100093 Yes
53 cushion absorbtion 17561265 No
55 sound absorbtion pad 17622207 No
56 wire bundle group 4400258 No
57 cushion of casing 1734267 No
58 cushion of casing 1734266 No
60 rear partition board 1101032A No
62 condenser 0400048A No
63 condenser cushion 1742280A No

b.LIST OF COMPONENTS
HW-18CC03
N Special Name Quantity description Damageable Cost
parts(yes or price
O. NO. no)
1. 1231245 Air-inlet bar 1 No
2. 2400105 Filter 1 No
3. 1231246 Font panel 1 No
Underneath 1 No
4. 1231251 support
5. 1231250 Vertical louver 1 No
6. 1231249 Immobility box 1 No
7. 1734960 Pad 1 No
8. 1231247 Horizontal louver 8 No
9. 1231248 Synchronous pole 1 No
10. 1231248 Synchronous pole 1 No
11. 1301518 Front cover plate 1 No
12. 1301517 Back cover plate 1 No
Front partition 1
13. 1301521 plate No
14. 1301526 Support plate 1 No
Front partition 1
15. 1742754 plate pad No
16. 3000167 Fan motor 1 Yes
Liquid-divide pipe 1
17. 0500391 assembly No
Back partition 1
18. 1301530 plate No
19. 2331061 Centrifugal fan 1 Yes
Suction pipe 1
20. 0500424 assembly No
21. 1431783 Wire holder cover 1 No
22. 2000113 Compressor 1 Yes
23. 1751965 Cushion rubber 1 No
24. 5002013 Bolt 1
Centrifugal fan
25. 2332063 assembly 1 No
26. 1233252 Scroll case 1 No
Evaporator 1
27. 1301520 partition plate No
Evaporator No
28. 0400122 assembly 1
Electric box cover 1
29. 1742952 plate pad No
30. 5701100 Thermostat clip 1 No
31. 1301524 Bottom plate 1 No
32. 1231253 Fresh air door 1 No
33 1303522 Drawing pole 1 No
34. 1236255 Electric box cover 1
plate No
35. 1231258 Rotation handle 1 No
36. 3000168 Synchro motor 1 Yes
37. 4200117 Power cord 1 No
37
Fan motor 1 Yes
38. 3600218 capacitor
39. 3400145 Base line bank 1 No
40. 1301528 Electric box 1 No
41. 4000011 Line contact bank 1 No
42. 5736092 Power cord clip 1 No
43. 1324670 Control panel 1 No
38
Model:HW-18HA03
parts(yes or price
O. NO. no)
1 0100257 Front grill assembly 1 No
2 0100619 Drought foam 1 No
1752795 Pad 2 No
3
1752796
4 1231249 Immobility box 1 No
5 1231250 Vertical louver 1 No
Underneath 4
6 1231251 support No
7 1301518 Front cover plate 1 No
8 1301517 Back cover plate 3 No
Front partition 3 No
9 1301521 plate
10 1301526 Support plate 1 No
Front partition 4
11 1742754 plate pad No
12 3000167 Fan motor 1 No
13 3400191 Thermostat No
14 1301526 Topcase(b) No
15 1742954 Front partition cushion(c) No
16 1301530 Back
plate
partition No
17 2331064 Centrifugal fan No
18 1301530 Rear partition plate No
19 2331061 Axial fan Yes
20 21111240 Suction pipe No
21 21111236 Discharge pipe No
22 2500015 4-Valve way(h) No
23 2000176 Compressor(i) No
24 1734937 Cushion rubber No
assembly
26 1233252 Scroll case No
Evaporator
27 1301520 partition plate No
Evaporator
28 0400122 assembly(j) No
Electric box cover No
29 1742952 plate pad
30 5701100 Thermostat clip Yes
31 0100812 Bottom plate Yes
assembly
32 1231253 Fresh air door No
33 1303522 Drawing pole No
Electric box cover
34 1236255 plate No
35 1231258 Rotation handle No
36 3000168 Synchro motor(k) No
39
motor capacito Yes
37 3600218 (I)
38 3400198 Select switch(m) No
39 1301935 Electric box(N) No
40 400011 Line contact bank No
41 3400198 Selection switch No
42 1300760 Control panel(0) No
43 1431075 Knob Yes
44 3400008 Ship sized switch Yes
45 1300760 Control panel(0) No
46 3400191 Thermostat(p) Yes
47 3600131 Compressor
capacitor Yes
48 5701099 Capacitor clip No
49 1301632 Fixed band No
50 1233254 Drain pan No
Condenser
51 0400180 assembly(q) No
52 0100396 Casing assembly No
53
54
Model:HW-18CC03,EA-1990W
parts(yes or price
O. NO. no)
1 1231245 Air-inlet bar(A) No
2 2400105 Filter (B) No
3 1231246 Font panel(C) No
4 1231251 Underneath support No
5 1231250 Vertical louver No
6 1231249 Immobility box No
7 1734960 Pad No
40
Model:HW-18CC03,EA-1990W
parts(yes or price
O. NO. no)
1 1231245 Air-inlet bar(A) No
2 2400105 Filter (B) No
3 1231246 Font panel(C) No
4 1231251 Underneath support No
5 1231250 Vertical louver No
6 1231249 Immobility box No
7 1734960 Pad No
8 1231247 Horizontal louver No
9 1231248 Synchronous pole No
10 1231248 Synchronous pole No
11 1301518 Front cover plate No
12 1301517 Back cover plate No
13 1301521 Front partition plate No
14 1301526 Support plate No
15 1742754 Front partition plate No
16 3000167 Fan motor No
17 0500391 Liquid-divide pipe No
18 1301530 Back partition plate No
20 0500424 Suction pipe No
21 1431783 Wire holder cover No
22 2000113 Compressor No
23 1751965 Cushion rubber No
Cushion robber of
24 1751965 No
compressor
27 1301520 Evaporator No
28 0400122 Evaporator No
29 1742952 Electric box cover No
30 5701100 Thermostat clip No
31 1301524 Bottom plate No
32 1231253 Fresh air door No
33 1303522 Place button No
34 1236255 Electric box cover No
35 1231258 Rotation handle No
36 3000168 Synchro motor Yes
37 4200117 Power cord No
38 3600218 Fan motor capacitor No
39 3400145 Base line bank No
40 1301528 Electric box No
41 4000011 Line contact bank No
42 5736092 Power cord clip No
43 1324670 Control panel No
44 1231256 Knob No
45 1301527 Switch No
46 1231256 Knob No
41
47 1431781 Dial knob No
48 3400144 Thermostat Yes
49 3600010 Compressor Yes
51 1301632 Fixing board No
52 340144 Thermostat No
55 0400123 Condenser assembly Yes
56 No
57 No
42
Knock-down Drawings Description List
HW-18CA13
NO Special Name Quantity description Damageable Cost
parts(yes or price
NO. no)
1 2400062 Filter No
2 1431395 Font panel No
Evaporator No
3 0400092 assembly
4 1733562 Font panel foam No
5 No
6 1101116 Evaporator
partition plate No
9 1431075 Knob No
10 1311478 Control panel No
12 Power cord No
13 Line contact No
4000082 bank
14 3400096 Thermostat Yes
15 3600018 Fan motor Yes
capacitor
Compressor
16 3600030 capacitor Yes
Electric box
17 1301430 cover plate No
0400091 Condenser No
18 assembly
19 1431388 Plate for Leader No
orientation
20 1431387 leader No
21 1431392 Synchro motor No
box
23 3000104 Synchro motor Yes
Centrifugal Yes
24 2331033 fan assembly
25
26
Thermostat
28 1231190 clip No
30 1101114 motor support No
31 1301426 cover plate No
32 Front partition No
1101115 plate
33 2331032 Axial fan Yes
Back partition No
34 1101113 plate
35 2000084 Compressor Yes
43
36 1756819 latex No
37
38
39
40
44
HW-24C03
NO. Special Name Quantity description Damageable Cost
NO. parts(yes or no) price
1 Front grill assembly No
2 1232119 Front panel No
3 0900078 Air purifying filter No
4 2400076 Air filter No
5 5002013 Screw No
6 0400065 Heat exchanger No
7 2343037 Bearing No
8 2300034 Fan Yes
9 5002021 Screw No
10 1232116 Bottom frame No
11 1734630 Pad No
12 1733639 Pad No
13 1734627 Pad No
14 1101075 Mounting plate No
16 1431458 Motor cover No
17 5002114 Screw No
18 4000108 Terminal block No
20 Power wire No
21 5002116 Screw No
22 1231124 Wiring clamp No
23 3900004 Temperature sensor Yes
24 5002070 Screw No
25 5002026 Screw No
26 3000071 Swing motor Yes
27 5002030 Screw No
28 1231126 Horizontal blade No
29 1734635 Pad No
31 0900049 Drain hose No
32 1733647 Heat insulation pad No
33 1733632 Heat insulation pad No
34 1443459 Panel button No
35 5313001 Nut No
36 2912002 Dustproof cover No
37 5313003 Nut No
38 2912002 Dustproof cover No
39 0500225 Liquid pipe assembly No
40 0500226 Gas pipe assembly No
41 1734631A Protective tube No
42 1231125 Service cover No
43 0600252 PC board No
44 200185 compressor Yes
45 17521174 Cushion of compressor No
46 5701122 Fasten clip of compressor No
47 13011266 fixer No
49 21111108 Liquid container No
50 2611312 Capillary No
51 1756030 Lining pipe No
Liquid inlet pipe of
52 0500446 evaporator No
53 1233323 Water receiving plate No
55 3600239 Compressor starting capacitor Yes
56 3600021 Compressor running capacitor Yes
45
58 3000168 Synchre motor Yes
59 3600134 Fan capacitor Yes
60 3100121 Compressor relay No
61 3400145 Selection switch Yes
62 1436772 Line fixed clip No
63 5002098 Bolt No
64 4200169 Wire No
46
6.MOCROCOMPUTER CONTROLING
a. Part's name and function of MOCROCOMPUTER
Display Operation
Signal indicator TEMP Temp.Set

Lights up when sending a Used to select temp setting
C
signal to the unit
SLEEP TIMER
OFF
ON Timer
Temp.indicator
HR Used to set timer setting
To show temp. setting selected AUTO
COOL MODE
DRY
FAN Mode
Timer indicator AUTO FAN
HI Used to select operation mode
To show timer mode display LOW For heat pump, the charactor "Fan"
LOUVER is substituted by"Heat"
Time display
Fan
To show the number of hour ON/OFF
selected to timer ON/OFF Used to select desired fan speed
Operation mode indicator Swing

To show mode selected Used to adjust air flow direction
Fan speed indicator ON/OFF

To show Fan speed selected Press it to start unit and press
it again to stop
For cooling only type
47
Parts and Functions
Inserting Dry Batteries 1 Remove the lid

Two R-03 Reset Button Gently press the part indicated by
dry batteries (green) OPEN and slide the lid away from
the controller.
2 Insert the dry batteries

Make sure the dry batteries are set
in the right directions according to
Note: the diagram in the cavity.
1) Use two new dry batteries of the same brand
and type.
2) When the remote controller is not active after 3 Attach the lid
dry batteries have been replaced, press with a
thin stick the green-colored reset button which 4 Verify by the indicators
is illustrated with a mark in the figure. If displays do not appear when the
3) If the wireless remote controller is not to be ON/OFF switch has been pressed,
used for a long period, the dry batteries should set dry batteries once more.
be removed from the wireless remote controller.
Handing the Wireless Remote Controller
When operating, point the signal sending head toward the signal receiver of the unit.
Do not allow any obstacle between the signal sending head and the signal receiver.
Do not drop, throw or wet the wireless remote controller.
The signal receiver may not receive the signal in a room which has an electro-lighting
(rapidstart) type fluorescent lamp, an inverter-type fluorescent lamp or a cordless phone.
48
b MODE OPERATION
1.Start
Press ON/OFF button
2.Select operation mode

Press the "MODE" button. Every time TEMP
the button is pressed, operation mode
changes in the following order. C
SLEEP TIMER
OFF
AUTO COOL DRY ON
FAN
HR
AUTO
COOL MODE
DRY
Select "Auto" mode. FAN
2
AUTO FAN
HI
3.Fan speed selection LOW 3
Press the FAN speed button. Every LOUVER
time it is pressed, Fan speed changes
as follows:
ON/OFF
AUTO HI LOW 4
1
Select desired fan speed. Change air

flow if necessary.
4.Stop
Press ON/OFF button again.
Hints
In Auto mode, the unit will select operation mode automatically according to room
temp.
49
Cooling operation
1.Start
Press ON/OFF button

3 3
SLEEP TIMER
OFF
AUTO COOL DRY ON
FAN
HR
AUTO
COOL MODE
DRY
Select "cool" mode. FAN
2
AUTO FAN
HI
3.Select temp. setting LOW
4
Select desired temp., Mby using "TEMP." LOUVER
button.
" " Each press will increase temp. setting by 1 .
" " Each press will decrease temp. setting by 1 .
ON/OFF
If the button is kept pressed, temp. setting
will change quickly to your desired figure. 5
1
4.Fan speed selection

Press the "Fan" button, every time it is
pressed, fan speed changes as follows:
AUTO HI LOW
Select desired setting.

Change air flow direction if necessary.
5.Stop
Cautions:
To-protect unit system, don't restart until 3 minutes have elapsed.

If the unit has been running under large humidity for a long time, dew might occur
at outlet grating.
50
Dry Mode
1.Start
Press ON/OFF button

SLEEP TIMER
OFF
AUTO COOL DRY ON
FAN
HR
AUTO
COOL MODE
DRY
Select "DRY" mode. FAN
2
AUTO FAN
HI
Change air flow direction if necessary. LOW
LOUVER
3.Stop
ON/OFF
Press"ON/OFF" button again.
3
1
Cautions:
Unit will run intermittently in Dry mode with fan speed at "LOW", regardless of
its setting.
Air blown out will be very cold at relatively low room temp.
51
Fan operation
1.Start
Press ON/OFF button

changes in the following order: C
SLEEP TIMER
OFF
AUTO COOL DRY ON
FAN
HR
AUTO
COOL MODE
DRY
Select "Fan" mode. FAN
2
This "Fan" is substituted by "HEAT" for heat AUTO FAN
HI
type air conditioner. LOW
3
LOUVER

Press the FAN speed button. Every time it
ON/OFF
is pressed, Fan speed changes as follows:
4
1
HI LOW

flow if necessary.
4.Stop
Hints
Compressor won't start in FAN mode, only fan motor will run
at selected speed.
52
Heat operation
This function is only for heat pump.
TEMP
1.Start
Press ON/OFF button C
SLEEP TIMER
OFF
2.Select operation mode ON
Press the "MODE" button. Every time
HR
the button is pressed, operation mode AUTO
changes in the following order. COOL MODE
DRY
HEAT
AUTO COOL DRY HEAT AUTO FAN
2
HI
LOW
3
LOUVER
Select "Heat" mode.

ON/OFF
Press the FAN speed button. Every time it 4
is pressed, Fan speed changes as follows: 1
AUTO HI LOW

flow if necessary.
For heat pump type

4.Stop
Note: This Auxiliary heat function is only
for AW-12eA03, AW-12eA04
Auxiliary Heat function
In Heating, if push Auxiliary Heat switch to ON
position, when room temperature is no more than HW-12eA04 POWER TIMER OPERATION
HW-12HA04
20 , after compressor has started for 1 minute,
Auxiliary Heat function starts; when room temperature
is over 25 or during defrosting, Auxiliary
ON OFF
Heat function stops. To cancel Auxiliary
heat function, just push to "OFF" position. Auxiliary Heat switch Emergency switch
53
Sleep mode setting
1.Start unit and confirm its operation mode.

In dry and fan mode, there is no sleep
function.
TEMP
2.Select SLEEP function C

Press the "TIMER" button, Every time SLEEP TIMER
the button is pressed; it changes in the OFF
ON 2
following order:
HR
AUTO
COOL MODE
SLEEP TIMER OFF TIMER ON BLANK DRY
FAN
AUTO FAN
HI
LOW
LOUVER
Select"SLEEP" function.
More details is illustrated in page 13.
ON/OFF
1
Hint
In Sleep function, temp. setting will rise

automatically by 1 after one hour's
cooling operation. One hour later, it will
rise by another 1 and maintain at this
temp. until the unit runs for approx. 6 hours.
54
Timer operation
With this function, unit will start or stop at

the time you want.
1.Start unit and confirm its operation mode.

If it's not started, start it and select desired
operation mode. TEMP
C
SLEEP TIMER
2. Select Timer function OFF
Press the "TIMER" button. Every time ON 2
the button is pressed; it changes in the HR
following order: 3
AUTO 3
COOL MODE
DRY
SLEEP TIMER OFF TIMER ON BLANK FAN
AUTO FAN
HI
LOW
LOUVER
Select desired mode. (TIMER OFF or

TIMER ON)
ON/OFF
1
3.Select time
Press TIME SET button.
" " Each press will increase time setting by 1 hour.
" " Each press will decrease time setting by 1 hour.
If the button is kept pressed, time setting will
change quickly to your desired figure.
Time setting is available within 1-12 Hrs.
Time displayed shows how many hours later unit
will start or stop.
To cancel Timer function

Select "Blank" by pressing TIMER button.
Caution
TIMER function is not available in SLEEP mode.
55
Operation
Sleep
When the sleep and timing are set simultaneously, the sleep is prior. The sleep will
automatically reset the timing, and cancel the former timing. The setting of time is as below:
In cooling
+1
+1
Set cooling temperature
Set heating temperature 1 hour 1 hour 6 hours

-1
-1
In heating The sleep starts The sleep finishes
In sleep running, the air velocity can be adjusted. After the sleep finishes, the air
conditioner will resume its former mode automatically.
Pendulous
Adjusting of the air direction
Vertical guide plate
Horizontal guide plate
Left/right adjusting
Put the "Louver" button on the remote controller,
the pendulous guide plate automatically adjusts the
left/right air direction. Push again, the plate will
stop at its present position.
Upward/ downward adjusting
Turn the horizontal guide plate gently to adjust the upward/downward air direction.
(As per the above picture).
Emergency running
If the remote controller is lost or damaged, you can

use the Emergency running. Open the small door of the
display board, push down the "Emergency switch" key. POWER TIMER OPERATION
The "Operation" light is on and the conditioner will

perform automatic running, The emergency running disables WIRELESS REMOTE CONTROL
setting of temperature, air speed, sleep and timer, etc.
56
Function introduction
3 minutes delay function

After the conditioner is switched off, the protection device will make the compressor
perform 3 minutes delay before switching on the machine.
Cold air preventing

In heating, to prevent the blowing of cold air, the fan will pause for a while after the unit starting.
then begins to blow out warm air.
Auto frost-removing function

In heating when the outdoor heat exchanger gets frost, the machine will defrost automatically.
and the fan will stop. After that the machine will resume running automatically.
Ventilating function (For AW-12XXX, AW-18HBO3)
There's a handle at the lower left corner of the air outlet grating, which is the ventilating
switch. Generally it is set to left "Close" position. When moved to right, it will discharge part
of the indoor foul air so as to keep the indoor air fresh. If the switch is set to right "Open"
position for a long period, it will influence the cooling effect.
CLOSE VENT OPEN CLOSE VENT OPEN
Air ventilating Switch
57
D9
1N4007
+5 +5
D10
+5 1N4007
R10 R11 IC21A
110K 4.7K 74LS123 R23 7805 R4 FUSE
7 16 VOLTRER D5-D8
VCC 10K +5 IN4007 110/1U 3.15A
11 R20 3 1
15 RCext 10 C5 +5 5.1K R22 D4 Vout Vin CN5 CN6
3 103
GND
14 Cext 110K 1N4140 DQ1 C16
6 9 + +
R12 9014
z
+ + C3 1 A 13
VR
C2 5.1K C12 C15 C14
1 /16V 6 GND
12
10 /16V + 220 F/16V 473 T1

D1 R21 C11
2 B
C13 120VAC
IN4140 + C4
5.1K 10
1 /16V 0.01 /63V 2200 /35V 0.1 F/250V
+5
+6 R25
20K IC3 JK1
ULN2003
8
4
3
2
+5
7
19
CN2 CN1 1 16 C
48 2 A1 Q1 15
R15 PA7 39 3 A2 Q2 14
PA6 A3 Q3
INT
38 4 13
VPP
VCC
51K 12 PA5 37 5 A4 Q4 12 JK2
PC3 PA4 A5 Q5
TIMER
RESET
21 36 6 11
PD5Vrh
L1 PD3 PA3 35 A6 Q6
23 PD1 PA2 7 10
R10 24 34 A7 Q7
PD/ANG PA1 SWING
51K R24 +5 9
20K +5 +5 0
33 GND
16 PD6 PA8
58
17 PD7
IC1
22 PD2 CN4
L2 29 PD4 28
6005R3
30
PB3 27
RT1 PD5 PB2
31 PD6 26
+ 32 PB1 25
R16 PD7 PB0 +5
C8 5.1K 9 PC0
10 PC1 PC6 15 R1 JK4
10 F/16V 11 PC2 PC5 14 CN3 L
1 VSS PC4 13 510
20 PD4 LED1 H
16
EXTAL
XTAL
PC7
R2
6
5
R14 R17 JK5
2.2K 10K L3 510
R13 +5 LED2
RT2 C6
+ C7 1N 30P R3
10 /16V 510
LED3
05C
4MHZ
+5
+5
7.THE FUNCTION OF ELECTRIC CONTROL INTROUNTION
R5
BUZ R9 R8 51K
+5 D3 R6 C1 20K 20K
+5 1N4140 51K 100 /16V
REU
R19
1K + C10
DQ2 R7 D2 103
9014 1N 1N4140 XT
C9
K1 104
Pipe CN5
+5
+5 Tempera PB1
+
R15 JFM
C5 Louver
1K
R2
+ 5.1K
C8
RL4
CD7
+ CD3
27 FM-N
CD5
C3
0.01U
Room + 0.01U R16
Tempera C12 5.1K FM-L
BUZZER
CD4 R14 R17
RP1 CN6
W9 JION
100
R3
ION
K1 RL5
10K
K2 R4 -ION
DQ1
TEST/SS S9013H

W2 JDJ
C9 Aid heat
W1 0.01U RL7
C11
DJ-L
0.01U
RED R11
HEATER C10 IC2
330 MC1413 JFH
GREEN R10 15 14 1 16
COMPRESS 16 13 RL3
2 15 CN2 INFAN
17 12 3 14
18 11 4 R10
GREEN R9 13
N ION 19 10 5 12
20 9 6 11 High
21 8 7 10
59
TIME YELLOW R8 22 7 8 9 JFL Low
/SLEEP 23 6
24 5 RL2
RED R7 1K
POWER 25 4
26 R5 R12
IC3 3
330 10K 27 2
R12 IC4 TMP008 C7 30P
CD8 28 1
+ R6
RV1
HS0038A 1600D
P1 C6 JYJ
C4 Compress
D2 RL6
0.1U JYJ
CX1
IC1 +12
2
+ ST7805 +
L1
0.01U
C2
+
ZR1 J-ST
CD2
100U/10V
C1
Si tong
GND
561K
3.15A
FUSE1
2200U/25V
CD1
RL1
0.1U/250V
3 +5v 1 ST-N
Vin
R1
1K 220V N ST-L
1A-100V
DB1 T101 R20
CN1
CN3
+12 DJ-J
+5
T600D IC4
FB1
+12
+ C8
+5 CD7
103 JDJ
R6 1K
100UF/10V
CX1 8MHz R2 1K COM
CD8
+
4.7UF/16V
+5 C4 D2 JYJ
104 1N4148 R3
100 NO
R12 330
REV
DQ1
9013 R17 27
R4 10K
IC1 RL5 N-ION
R7
+5

POWER 28
TMP87P808 1
R8 VDD XOUT
27 XIN 2 CN4 CN9
RP1 RESET RC1
TEST 3 R16 RL4
TIME/SLEEP 26 4 1 1 FM-L
IC5 P10 P67 IC2 27 103 120
25 P11 P66 5
6 2 2 2003
U2 24 P12 P65 1 16
4 5 23 7 IA OA
P13 P64 3 2 15
22 8 3 IB OB
3 6 N ION R9 P14 P63 3 14
21 P15 P62 9 IC OC RL3
R10 10 4 4 4 ID OD 13 R18
7 20 P16 P61 12 27 FM-N
2 19 11 5 IE OE
+5 P17 P60 6 11
COMPRESS 5 5 IF OF
1 8 R11 7 IC OG 10
6 6 CN2
HEATER +5 INF AN
330*5
7 7 8 9 R19 RL2
GND VCC
27
C9 104 18 8 9
17 P72 P77 12
10K-7 16 P73 R5 1K
15 P74 13
P75 P76
CN6 RL1
14 ST-L ST-N
VSS/AS CN7 CN8 R20 27
60
C10 SRE1AL
K2 103 4 CD4
R15 5K 4
+5
K1 C 11 4.7UF/16V +
C5 103 3 3
R14 5K 2 2 CD3
103
+
U9 1 1 4.7UF/16V CN5
+5 C7 103
CD5 + C6
100UF/10V 103
IC3 CN3 CN1

L1 330UH 7805 +12 DB1
+5
3 Vo u t Vin 1
LX ZE1
GND
+
2
CD1 220V-N
CD2 + C3 R1 FUSE 1
2200UF/25V C2
100UF/10V 103 1K
C1 275V 104 2.15A/250V
275V 104
+12
+5
7600D IC4
PB1
+12
+ C8
+5 CD7
103
R6 1K
100UF/10V COM
CX1 8MHz R2 1K
CD8
+
4.7UF/16V C4 D2
+5 R3 JVJ NO
104 IN4148 100
R12 330
REV
DO1

9013 R17 27
R4 10K
RL5 N- ION
IC1
R7
+5
TMP87P808
POWER 28 XOUT 1
R8 VDD 2
27 RESET XIN CN4 CN9 RC1
RP1 TEST 3 R16 RL4
TIME/SLEEP 26 4 1 1 FM-L 103 120
IC5 P10 P67 IC2 27
25 5 2003
P 11 P66 2 2
24 P65 6 16
4 5 W2 P12 7 1 IA OA
23 P13 P64 2 15
8 3 3 IB OB
3 6 22 P14 P63 3 IC 14
N ION R9 9 OC R18 RL3
21 P15 P62 4 4 ID 13
R10 20 P61 10 4 OD FM-N
2 7 P16 5 IE OE 12 27
19 P60 11 11
+5 COMPRESS P17 5 5 6 IF OF
1 8 R11 7 IG OG 10
6 6 CN2
H E AT E R +5 9 R19 RL2 I N FA N
330-5 7 7 8 GND VCC 27
18 P72
C9 104
61
17 12 8 8
P73 P77
10K 7 16 P74 R5 1K
15 P76 13
P75
CN6
14 CN7 CN8
VSS/AS
C10 SRE1 AL
K2 103 4 CD4
R15 5K 4 +5
4.7UF/16V +
K1 C 11 C5 103 3 3
R14 5K 2 2 CD3
103 +
4.7UF/16V CN5
U9 1 1
+5 C7 103
CD5+ C6
100UF/10V 103
IC3 CN3 CN1

L1 330UH 7805 +12 DB1
+5
3 1
Vo u t Vin
GND
LX ZE1
+
220V-N
2
CD1 FUSE1
CD2 + C3 R1 2200UF/25V C2
100UF/10V 103 1K
C1 275V 104 3.15A/250V
275V104
D9 IN4007
+5 +5
D4 +5 IN4007
R10 R11 IC2:A
110K 4.7K IN4140 7805 D10
74LS120 R23 +5 D5 D8 FUSE
7 0.01 F/63V VOLTRCG 3.15A
VCC 16 20K IN4007
11 C21 R21 R22 0 1
10 +5 Vout Vin CN1 T1 CN6
15 RCext 24K 110K
3
GND
14 Cext
6 9 C16 + +
2
+ + C3 R12 C15 VR 220VAC
1 A Q 13 5.1K DQ1
C2 0 GND 220 F/16V C12
1 F/16V 12 + 9014
B Q
C11
2
D1 R20
+ C4 C13
10 F/16V IN4148 5.1K 47 F/16V 0.01 F/63V C14
1 F/16V 0.1 F/250VAC

+5 +5 D11 2200 F/35V
R19
+5 R18 10K 1N4007
1K
+5 CN2 JK1
D12
L1 1N4007
8
4
3
2
7
19
V
IC3
PA7 40 CN3 ULN2003
PA6 39 1 16
INT
A1 Q1
UPP
UCC
PA5 38 2 A2 Q2 15
37 3 14
TIMER
16 PC7 PA4 JK5
RESET
A3 Q3
PD6Wrh
PA3 36 4 A4 Q4 13
RT1 23 PA2 35 5 12 C
PD1 A5 Q5
+ 24 PD/AN0 PA1 34 R17 6 A6 Q6 11
R16 51K +5 7 A7 Q7 10
21 PA0 33 C6
C1 5.1K PD3
18
62
10 F/16V PD6 0.01 F/63V JK4
17 PD7 PC6 15 8 GND 9
IC1
22 PD2
29 28
PB4 PB3 SWING
6805R2
30 PB5 PB2 27
31 PB6 PB1 26
32 PB7 PB0 25
R14 9 PC0 +5 JK2
10K 10 PC1 PC3
12
R15 14 R1 C9
11 PC2 PC5 LED1 0.01 F/63V
2.2K 1 VSS PC4 13 510 ST
20 PD4
RT2
XTAL
EXTAL
+ C8
10 F/16V R2 JK6
6
5
LED2
510 L
R10
1M C5 H
C19 30P/63V R3 LED3
0.01 F/63V +5 15K 15K 510 JK3
DUZ CN-FAN
R27 R25 OSC
R24 R26 4MHZ
510 C17 C18 510 C22
+5 0.01 F/63V
D3
0.01 F/63V 0.01 F/63V +5 IN4148 +5
R5 +5
51K
R6 R7 R9
DQ2 10K 51K 51K
1815 C7 51K R4
100 F/16V
RED
K2 C10
DQ4 +
2SC1015 R8 D2
1M IN4140
XT C23
C20 0.1 F/63V
0.1 F/63V
K1
0.1 F/63V
+12 DJ-J
+5
T600D IC4
PB1
+12
+5 + C8
CD7
103
R6 1K JDJ
100 F/10V
CD8 CX1 8MHz R2 1K
+
4.7 F/16V
+5 C4
D2
R12 330 104 IN4148 R3 JYJ
100
REV
DQ1
9013
R4 10K R17 27
R7 IC1 RL5 N-I0N

+5
TMP87P808
POWER 28 1
R8 VDD XOUT
27 RESET XIN 2 CN4 CN9
RP1 3
TIME/SLEEP 26 TEST R16 RC1
IC5 P10 P67 4 1 1 RL4
25 5 IC2 27 FM-L
4 5 P11 P66 103 120
U2 24 P12 P65 6 2 2 2003
23 P13 P64 7 1 IA 0A 16
3 6 22 P14 P63 8 3 3 2 15
N ION R9 IB 0B
21 P15 P62 9 3 IC 0C 14
2 7 R10 20 10 4 4 4 13 R18
+5 P16 P61 ID 0D 27 RL3
COMPRESS 19 P17 P60 11 5 IE 0E 12 FM-N
1 8 5 5 6 11
R11 IF 0F
7 IG 0G 10
6 6
HEATER 330*5 +5 CN2
7 7 9 INFAN
8 GND VCC R19 RL2
C9 104 18 P72 27
17 12 8 8
10K*7 P73 P77
16 P74
15 P75 13 R5 1K
P76
14 CN6
63
VSS/AS CN7 CN8 RL1 ST-N
C10 R20 27 ST-L
K2 SREIAL
103
R15 5K 4 4 CD4
K1 C11 +5
C5 103 3 3 4.7 F/16V +
R14 5K 2 2
103 CD3
U9 1 1 4.7 F/16V +
+5 C7 103 CN5
CD5 C6
100 F/10V 103
+5 L1 330UH 7805 IC3 +12 CN3 CN1

DB1
3 Vout Vin 1
LX ZE1
GND
+
2
CD2 + C3 R1 CD1
2200 F/25V FUSE1 220V-N
100 F/10V 103 1K C2
275V104 C1 275V104 3.15A/250V

D9
5 5
R10 R11 D4 5
IC2:A
: D10
5 2005 FUSE
7 16 R23 D5 D0 C13
WCC
11 C5 R21 R22 3 Wout W:n
: 1
15 10 5
RCext T1
3
14
Cext 9 C16
6 R12
2 GND
C0 1 13 C12 UR 220VAC
C2 A Q DQ1
8 GHD C15
12
B
Q
D1 C11
R20
2
C4 C14

5
CN2 CN1
5
L1
7
19
8
4
3
2
ICD
PA7 40
39 5 5 1 16
INT
PA6 A1 Q1
WPP
WCC
PA5 38 2 A2 Q2 15
TIMER
RESET
16 PC7 PA4 37 3 14 JK1
A3 Q3
PDEVDB
PA3 36 4 A4 Q4 13
CN5 20 PD1 35 5 12
PA2 A5 Q5 C
24 PD/AN0 PA1 34 R24 6 A6 Q6 11
R16 5 7 10
C8 33 A7 Q7
21 PD3 PA0
18 PD6 JK2
17 PD7 PC6 15 0 GND 2
64
22
IC1
PD2 CN4
29 28 CN3 6
6805R3
PB4 PB3 SWING
30 PB5 PB2 27
31 PB6 PB1 26
32 PB7 PB0 25
9 PC0 5
R17 10 12
PC1 PC3
11 PC2 14 5 5 R1
R14 PC5 LED1
1 WSS PC4 13 1 JK4
20 PD4 L
EXTAL
XTAL
C7
R2 H
6
LED2
R13 JK5
C6
R3 LED3 CN-FAN
5 R27 R28 5
BUZ
OSC
R26 5
R29 R9
R8
C17 C18 5
DQ3
DQ4 C9
R5
K1
R19 XT
DQ2 C10
REV
OUT
8.WIRING DIAGRAM
7363519A
Wiring Diagram
Synchro motor
Temp. COMP.
Capacitor
Fan C S
sensor motor R
Receiver board OLR R
R
OR
CN4 B B
Capacitor B Y BL BL W BL
CN2
CN3 CN-FAN
JK2 Relay Trans.
JK1
Relay
JK4 Relay
Emergency switch
CN1
K1 JK5 Relay
BR
L
BL BR:BROWN R:RED
Power supply
N
BL:BLUE B:BLACK
Y/G OR:ORANGE Y:YELLOW
Terminal block Y/G:YELLOW/GREEN
HW-09CD03
7363695
TIMER
CONT
OFF
3
TIMER 2 Y R
1 2 R B FAN
BL SW1 1 MOTOR
R CAPACITOR
BR M
5 BL R BL
CAPACITOR
BL A B R
BL THERMOSTAT
BL COMP
C R
Y/G RELAY S
B B B W
TERMINAL BLOCK
OLR
2 3 B Y
M
POWER
SW2 SYNCHROMOTOR
W : WHITE
B : BLACK BR : BROWN
R : RED BL : BLUE
Y : YELLOW Y/G : YELLOW/GREEN
HW-09C03
HW-09CE03
82
7363749
WIRING DIAGRAM
BOATSWITCH SYNCHROMOTOR
R R BL
M
R
FAN MOTOR
Y Y
B M
OPTIONAL OR FAN CAPACITOR
SWITCH 4321 BL
LO FAN
LO COOL
C
HI COOL THERMOSTAT
HI FAN L COMP. COMP.
OFF B CAPACITOR
R S
TERMINAL 0 CM
BR BR R
L
Y/G PROTECTOR BL BL
BL
N
BL
Y/G
POWER
TERMINAL
R:RED OR:ORANGE
B:BLACK Y:YELLOW
BL:BLUE BR:BROWN NOTE:BECAUSE OF DIFFERENT COMPRESSOR,
Y/G:YELLOW/GREEN THE DOTTED PART MAY NOT BE USED.
HW-07CA03
7363720
WIRING DIAGRAM
COMP.
M
ROOM TEMP. FAN SYNCHRO- CRS
RECIEVE HEAD SENSOR MOTOR MOTOR BR
B M M COMP, CAPACITOR
W LH
INDICATOR R
LIGHT CN4 FAN MOTOR
W B R
CAPACITOR Y R BL BL B
CN2 CN5
N
CN3 LH NO COM
TRANS.
FUSE
JK1 W
CN1
CN6
W
K1 250V~,3.0A
B
G
POWER
W R : RED W : WHITE
B : BLACK Y : YELLOW
BL : BLUE G : GREEN
HW-09CA12
83
B : BLACK Y ::YELLOW
LOUVER
7363760
R ::RED BL : BLUE
BR ::BROWN MOTOR
BL BR
Y/G : YELLOW /GREEN M FAN MOTOR
R L M BR CAPACITOR
B H
Y/G Y
B BOAT-SWITCH
BL
MODE
SELECTION 4A123 B SYNCHROMOTOR
SWITCH 0 BR M B
THERMOSTAT COMP..
BR OHP..
Y/G R R C
M OPERATION
BL CAPACITOR
R S BL
POWER BL BL B
B BL
B
STARTING TERMINAL
CAPACITOR 5 1 4 2 BLOCK
CPMP.. RELAY
Note:Because
: of the difference of compressor,
the dotted line part may not exist..
HW-24C03 HW-24CA03 HW-24CA13(T3)
84
7363744
WIRING DIAGRAM
Louver motor
BL BR
R Motor capacitor
M
B Y
B BL
Mode selection 4A123 B Boat-switch

BR B
switch 0 M
Synchro-motor
BR BL
Thermostat COMP.
Y/G B
BL S
C M
Compressor
POWER R capacitor
Overload
protector R BL BL
Terminal block
R:RED
Note: Because of the difference BL:BLUE BR:BROWN
of compressor, the dotted line Y:YELLOW B:BLACK
part may not exist. Y/G:YELLOW/GREEN
EA-1990W HW-18CC03
HW-18CE03 HW-18C13(T3)
7363748
WIRING DIAGRAM
BOATSWITCH SYNCHROMOTOR
R R M BL
~
FAN MOTOR
B BR
R M Y FAN MOTOR CAPACITOR
OPTIONAL ~
SWITCH A 2 1 4 BL
HI COOL 3
LO COOL ELECTROMAGNETIC
CONVERTER
HI FAN VALVE
OFF BL
LO FAN BL DEFROSTING
LO HEAT R B THERMOSTAT
HI HEAT BL
BL
BR L H
C THERMOSTAT COMP.. B
Y/G S
R
BL CM BL
R
POWER PROTECTOR COMP..
CAPACITOR
R : RED
TERMINAL
B : BLACK Y : YELLOW NOTE:: BECAUSE OF DIFFERENT COMPRESSOR,
BL : BLUE BR : BROWN THE DOTTED PART MAY NOT BE USED..
Y/G : YELLOW/GREEN
HW-18HA03
85
9. MAINTENANCE ANDTROUBLE SHOOTING
1.Maintenance
Air filter cleaning: Please clean the air filter every two weeks
When dirt accumulates on air filter, air circulation will be blocked, which causes
poor cooling. It is advisable to clean. air filter every two weeks for longer
operation.
Removal of air filter
(1) Loose the air filter by pushing PUSH

at both ends of air inlet.
(2) Hold the air filter by frame and lift it
forward for approx. 5 mm.
(3) Pull it out downward.
Air filter cleaning
1.Gently flap the dirt off the air filter.

2.Carefully wash air filter in warm water
(below 40 ).To obtain better cleaning Washing
air filter
effect, soap water or neutral detergent
may be used.
3. Flush air filter carefully with clean water
after removing dirt. Let it dry completely.
Installation of filter
(1) Hold the filter by its frame and push it upward

along the groove under air inlet until it comes to a complete stop.
(2) Push the part marked with PUSH until you hear a click.
86
Maintenance
Disposal of condensate
1.The drain hole on the bottom of the air conditioner will be clogged by a rubber
stopper to make the condensate. in the bottom tray be spattered onto the
condensation to raise efficiency of heat exchange. If the spattering sound
disturbs you, you can adopt the method illustrated below.
Condensation running out from the drain hole on the back of the unit
2.Remove the rubber stopper from the drain hole on the bottom in order to make
the condensate run out. In this method the efficiency of air conditioner will be
slightly lowered.
In the both methods above, an extended hose (available on the market) can be
connected to the drain connecting pipe if necessary.
Drainage pipe Extended

pipe(hose)
drain connecting pipe
Extended hose
HW-07XXX HW-08XXX HW-09XXX HW-12XXX HW-10C12
HW-18XXX HW-18XXX
Cautions
Power cord: Be sure to use the exclusive power cord.

Change installation place: If air-con need to be changed to another
place please contact the dealer, who sold you the unit.
87
Maintenance
Avoid opening door and window Don't be exposed to cold air for
unless necessary a long time.
Use curtain or blind Keep heat source away from

Direct sunlight may reduce cooling air conditioner.
effect, always use window curtain.
Keep away from me
No entrance
Set temp. a little bit higher After unit stops, don't restart it
before going to bed. until 3 min. have elapsed.
(Or, fuse may blow out or motor burnt.)
njoy a
OK! e nap
3-min
88
2.Troubleshooting Information
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit and
discharge capacitor through a 10,000 ohm resistor before attempting to service, unless test procedures require
power to be connected. Ensure all ground wires are connected before certifying unit as repaired and/or
operational.
CAUTION
Units covered in this manual are polarized. Reversing polarity of a unit or any of its components will cause
damage. To avoid reversing polarity, any wires disconnected or removed during service must be reconnected to
the same location. To ensure wires are reconnected to the proper location, tag or otherwise mark the wires
before disconnecting or removing.
Tools and Equipment Troubleshooting Table

Accurate diagnosis and repair of malfunctioning air Troubleshooting table on following pages contains
conditioners requires proper tools and equipment. In symptoms that may be seen in a malfunctioning air
addition to standard hand tools (screw drivers, pliers, conditioner. Each group of symptoms is accompanied by
sockets, etc.), the following equipment is required: one or more possible causes. Each possible cause is
accompanied by a remedy, or a test to determine if
Thermocouple type temperature tester, with sufficient suspect component(s) are working properly.
range to meet all testing and measuring requirements.
Multimeter(combination voltmeter, ammeter, and
ohmmeter) for reading current loads during start up
and normal operation, verifying voltage levels, and
testing various components for continuity.
Accurate leak detector, to check for refrigerant leaks.
Vacuum pump capable of removing all non-condensable
material in sealed system.
Charging manifold and related equipment to determine
and replenish exact refrigerant charges.
Recovery cylinder and related equipment to recover
and store refrigerant charge in sealed system.
Additional tools and equipment may be required.
89
Troubleshooting Information
WARNING
operational.
Symptom Possible Causes Corrective Action
Fan motor will not operate No power supplied to unit Check fuse box/circuit breaker for blown fuse or tripped
breaker. Replace/reset.
Power supply cord failed
Check power cord for opens. Replace cord if failed.

Wire(s) disconnected or
loose
Ensure all connections are tight and secure.
Fan motor capacitor failed Check capacitor for open/short. Replace if failed.
NOTE: Discharge capacitor before testing.
Fan motor failed Check fan motor windings for shorts/opens. Replace if
failed.
Rotary control failed

Ensure all control connections are tight and secure. Check
control for proper operation and installation. Control must
not hang between settings. Replace if failed.
NOTE: Eliminate all other possible causes before
replacing rotary control.
Fan blade will not rotate Fan hitting shroud or blower Check fan blade/blower wheel for proper alignment on
wheel hitting scroll motor shaft. Reposition if necessary.
Fan motor operates Wire(s) disconnected or Ensure all connections are tight and secure. Correct as
intermittently loose required.

Rotary control failed control for proper operation and installation. Replace if
failed.
NOTE:Eliminate all other possible causes before replacing
rotary control.
Cycling on motor protector Replace motor.
Fan motor noisy Outside coil fan blade or Check fan blade/blower wheel for proper position.
inside coil blower wheel Reposition if necessary. Ensure hardware attaching fan
loose or improperly aligned blade/blower wheel to motor shaft is tight, Tighten if loose;
replace if stripped.
Fan motor mounting Check mounting bolts/bracket for tightness. Tighten if

hardware/bracket loose or necessary. Inspect grommets for wear. Replace if
grommets worn necessary.
(if applicable)
Worn fan motor bearings Replace motor.

RS4110008 Rev.0
90
WARNING
To avoid risk of electrical shock, personal injury, or death,disconnect electrical power source to unit and discharge
capacitor through a 10,000 ohm resistor before attempting to service, unless test procedures require power to be
connected. Ensure all ground wires are connected before certifying unit as repaired and/or operational.
Compressor does not run, Wire(s) disconnected or Ensure all connections are tight and secure. Correct as
fan motor operates loose required.
normally.
Compressor motor Check capacitor for open/short. Replace if failed.
capacitor failed. NOTE: Discharge capacitor before testing.
Compressor failed. Check compressor motor windings for open/short. Replace

compressor if failed.
Overload protector open.
Check protector for continuity. If open, replace.
NOTE:Ensure compressor/overload are below trip
temperature before testing.
Rotary control failed.
control for proper operation. Replace if failed.
NOTE:Eliminate all other possible causes before
replacing rotary control.
Compressor cycles on Wire(s) disconnected or Ensure all connections are tight and secure. Correct as
and off. loose. required.
Supply voltage out of Check input voltage for proper levels. Take appropriate
specification. action if voltage levels out of specification.
Overload protector open. Check protector for continuity. If open, replace.

NOTE:Ensure compressor/overload are below trip
temperature before testing.
Restricted air flow. Inspect air filter, indoor/outdoor coil for dirt. Clean as
required. Check fins on coils for damage. Straighten fins if
bent, attempt other repairs as necessary. Replace
coil if repairs cannot be made.
Fan motor failed. Check fan motor for proper operation. Replace if failed.
Compressor motor Check capacitor for open/short. Replace if failed.

capacitor failed. NOTE:Discharge capacitor before testing.
Sealed refrigerant system Test sealed system for proper charge, leaks, and
failure. restrictions. Repair as required.
Insufficient cooling Low refrigerant charge. Test sealed system for proper charge. Ensure system is
free of leaks. Repair as required.
Inspect air filter, indoor/outdoor coil for dirt. Clean as
Restricted air flow. required. Check fins on coils for damage. Straighten fins if
bent, attempt other repairs as necessary. Replace coil if
repairs cannot be made.
RS4110008 Rev.0
91
WARNING
operational.
Insufficient cooling Vent screen installed in Remove vent screen and install vent plug in partition panel.
partition panel.
Unit undersized for area/ Reduce area being cooled or replace unit with larger
room. capacity model.
Excessive noise Outside coil fan blade or Check fan blade/blower wheel for proper position.
inside coil blower wheel Reposition if necessary. Ensure hardware attaching fan
loose or improperly blade/blower wheel to motor shaft is tight. Tighten if loose,
aligned. replace if stripped.
Compressor mounting Check mounting bolts for tightness. Tighten if necessary.

hardware loose or Inspect grommets for wear. Replace if necessary.
grommets worn.
Inspect unit for parts that may have worked free, loose/
Free parts, loose screws missing screws, other problems that may cause
causing or allowing excessive vibration. Repair as required.
excessive vibration.
Check bearings for wear/loss of lubricant. Replace motor if
Worn fan motor bearings. either condition is found.
Fan motor mounting Check mounting bolts/bracket for tightness. Tighten if

hardware/bracket loose or necessary. Inspect grommets for wear. Replace if
grommets worn (if necessary.
applicable).
Copper tubing improperly Inspect copper tubing for excessive vibration. Secure
dressed or routed. tubing as required.
Compressor internal noise. Inspect compressor for proper operation. Replace as

required.
No cooling. Low refrigerant charge or Test sealed system for proper charge. Ensure system is
leak in sealed system. free of leaks. Repair as required.
Evacuate sealed system. Remove blockage, recharge.
Blockage (restriction) in
sealed system.
Rotary control failed. Ensure all control connections are tight and secure. Check
control for proper operation. Replace if failed.
NOTE:Eliminate all other possible causes before replacing
rotary control.
Check compressor motor windings for open shorts. Check

Compressor failed. compressor seals. Perform compressor direct wiring test.
Replace compressor if failed.
RS4110008 Rev.0
92
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit and discharge
capacitor through a 10,000 ohm resistor before attempting to service, unless test procedures require power to be
connected. Ensure all ground wires are connected before certifying unit as repaired and/or operational.
Wattage slowly decreases Undercharged, restricted Test sealed system for proper charge. Ensure system is
below minimum strainer or plugged free of leaks/blockage. Repair as required. Evacuate/
specification. capillary tube. recharge sealed system.
Wattage decreases No refrigerant. Test sealed system for proper charge. Ensure system is
immediately. free of leaks. Repair as required.
Compressor failed. Check compressor motor windings for open/shorts.

Replace compressor if failed.
Wattage continuously Refrigerant overcharge. Test sealed system for proper charge. Repair as required.
high.
Evaporator coil partially System low on refrigerant. Test sealed system for proper charge. Ensure system is
frosted. free of leaks. Repair as required.
Restricted capillary tube. Replace capillary tube.
Insufficient air flow. Inspect air filter, indoor/outdoor coil for dirt. Clean as
required. Check fins on coils for damage. Straighten fins if
Failed fan motor Check fan motor for proper operation. Replace if failed.
Evaporator completely Low outside temperature. Turn unit off.(Consumer education)

iced.
Restricted capillary tube. Replace capillary tube.
Insufficient air flow. Inspect air filter, indoor/outdoor coil for dirt. Clean as
required, Check fins on coils for damage. Straighten fins if
Thermostat not cycling. Replace Thermostat.
RS4110008 Rev.0
93
10.SYSTEM FLOW CHART
Refrigerating Diagram
Indoor Outdoor
heat exchanger heat exchanger
4-way valve
Compressor
1-way valve
Filter Capacillary tube
Cooling
Heating
94
HW-12HA04, HW-12eA04 flow chart for program
Power on
Initiating
Y
Power off signal or not
N
Receiving of remote control signal function
Selecting function
Y
Heat signal or not Heating operation
Cool signal or not Y Cooling operation
N
Y Dehumidifying
Dehumidify signal or not
function
N
Vent signal or not
Y Vent function
N
Auto Operat-
Y ion function
Auto operate signal or not
N
Turn off signal or not
Turning off function
Return
95
HW-09CA12, HW-09CD03, AW124AAMBA, AW122AAMCA flow chart for program
Power on
Initiating
Y
Power off sognal or not
N
Selecting function
Y
Cool signal or not Cooling operation
Y Dehumidifyi
ng function
N
Y
Vent signal or not Vent function
Y Auto operation
function
N
Turning off signal or not
Return
96
AW122AAACA flow chart for program
Power on
Initiating
AD proper or not
N
Y
Proving sensor function
Remembering power off function
Selecting function
Y Heating operation
Heat signal or not
N
Y Cooling operation
Cool signal or not
N
Dehumidifyi
Y ng function
Vent signal or not

Y Vent function
N
Auto operation

Y function
Turn off signal or not N
Return
97
AW122AAACA flow chart for program
Power on
Initiating
AD proper or not
N
Y
Selecting function
Y Heating operation
Heat signal or not
N
Y Cooling operation
Cool signal or not
N
Dehumidifyi
Y ng function
Vent signal or not

Y Vent function
N
Auto operation
Y function
Return
98
HW-09CA12, HW-09CD03, AW124AAMBA, AW122AAMCA flow chart for program
Power on
Initiating
Y
Power off sognal or not
N
Selecting function
Y
Cool signal or not Cooling operation
Y Dehumidifyi
ng function
N
Y
Y Auto operation
function
N
Turning off signal or not
Return
99
HW-12HA04, HW-12eA04 flow chart for program
Power on
Initiating
Y
Power off signal or not
N
Selecting function
Y
Heat signal or not Heating operation
Cool signal or not Y

Cooling operation
N
Y Dehumidifying
Dehumidify signal or not function
N
Y
N
Y Auto Operat-
Auto operate signal or not -ion function
N
Turn off signal or not
Return
100
AW248AAMBA flow chart for program
Power on
Initiating
N
AD proper or not
Y

Selecting function
Y Cooling operation
Cool signal or not
N
Dehumidifyi
Y ng function
N
Y Vent function
Vent signal or not
N Auto operation
Y function
Return
101
11.INSTALLATION AND REPAIRIN
Installation Guide
The installation of air conditioner(only for reference)

1. Cut a wall hole or a window hole (see
Fig.1). iron support
A
A B
HW-09XX 350 530
B
HW-12XX 410 570
HW-18XX 438 670
thickness of the wall
2. Fix the iron support in a firm place with Fig.1

expansible screws. condenser
3. Take the air conditioner and its attachments

out from the packing carton.
rubber
stopper
4. Let the rear of the air conditioner raise
slightly, the drain hole on the bottom can
be seen. Fig.2
Clog it with a black rubber stopper attached
to the air conditioner(see Fig.2)
5. Insert the drain connecting pipe (with a

seal circle) attached to the air conditioner
into the vertical drain hole on the bottom
(see Fig.3)
6. The condensate needing to be led to the Fig.3

designated place, buy a soft plastic pipe
with internal diameter of 16mm to connect
the drain connecting pipe and tied it tightly drain connecting
(see Fig.3) pipe
seal circle
drain hose
7. All attachments being fixed, put the air
conditioner on the iron support. If there
is a drain hose, lead it to a required place Fig.4
(see Fig.4) not for HW-18XXX.
102
Installation Guide
8. Chink the wall and window with soft

sponges or rubber bits in order to
refrain from outside noises coming
in or cooling air going out.
9. Air conditioner being fixed, insert the wall
power plug in the socket, open the not for
operation panel cover, turn the temperature HW-18XXX
setting to Test run turn successively
the mode selection to Hi fan and Hi
cool Lo cool and Lo fan , turn
the auto swinging switch to ON to
inspect the air conditioner's start and
drain hose
running performance(see Fig.5)
10.If Test run is normal, turn mode
selection to OFF turn the temper-
ature setting to 9 and close the
operation panel cover. Now the air Fig.5
conditioner is ready for use.
The machine is adaptive in following situation

1.Applicable ambient temperature range:
Maximum: D.B/W.B 32 /23

Indoor side Minimum: D.B/W.B 18 /14
Cooling
Maximum: D.B 43
Outdoor side
Minimum: D.B 18
Maximum: D.B 27
Indoor side
Heating Minimum: D.B 15
Outdoor side
Minimum: D.B/W.B -7 /-8
esp. For(T3) type. eg. HW-18C13(T3). applicable ambient temperature is invalid.
For cooling only type, heating temperature range is invalid.
2. If the supply cord is damaged. it must be replaced by the manufacturer or its
service agent or a similar qualified person.
3. After installation, the power plug should be easily reached.
4. The wiring method should be in line with the local wiring standard.
103
Installation instruction
Selection of the installation position

1. Select position where the structure is firm.
2. Select position where the air inlet and outlet are smooth without obstacles.
3. Select position where the cooled air can be blown to every corner of the room.
4. Select position where there's no direct sunlight. If the sunlight is inevitable. sunshading device
is required.
5. Select position where the outdoor airflow will not influence the neighbors.
6. Select position where the drainage is smooth.
7. Select position where there's no dangerous gas or oil smoke nearby.
8. An extention cord is not recommened.
Installation diagram
It should be installed like this; the back side(outdoor side) is lower so that the drained water can
flow out smoothly.
Width of the wall should be

less than 295mm
>400mm
5~10mm
m
0m
>40
m >700
0m mm
>40
Requirements on electricity:
Be sure to use specific power circuit.
1.Applicable ambient temperature range:
Indoor Minimum: D.B/W.B 18 /14
Cooling
Maximum: D.B./W.B. 43 /26
Outdoor
Minimum: D.B 15
Maximum: D.B 27
Indoor
Heating Minimum: D.B 15
Outdoor
Minimum: D.B/W.B -7 /-8
If the ambient temp. is over 52 , the air-conditioner can also operate normally.
(For HW-18CC03, HW-24C03, HW-24CA03, HW-24C13, HW-24H03,AW242AQAAB,
HW-18CE03, HW222AAAAA, HW222AAMAA)
2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or
a similar qualified person. An extend cord is not recommended.
3. The wiring method should be in line with local wiring standard.
4. After installation, the power plug should be easily reached.
104
Installation instruction
Selection of the installation position

1. Select position where the structure is firm.
2. Select position where the air inlet and outlet are smooth without obstacles.
3. Select position where the cooled air can be blown to every corner .
4. Select position where there's no direct sunlight. If the sunlight is inevitable. sunshading device
is required.
5. Select position where the outdoor airflow will not influence the neighbors.
6. Select position where the drainage is smooth.
7. Select position where there's no dangerous gas or oil smoke nearby.
8. An extention cord is not recommened.
Installation diagram
It should be installed like this; the back side(outdoor side) is lower so that the drained water can
flow out smoothly.
Width of the wall should be

less than 295mm
>400mm
5~10mm
m
0m
>40
0mm >700
>40 mm
Requirements on electricity
Be sure to use specific power circuit.
The enclosed accessories of the conditioner are:
Name Manual Screw

Water outlet pipe Drain elbow Rubber lid seal ring Drain pan
4 6
Figure
For HW-10XXX For HW-09XXX For HW-10XXX For HW-07XXX
HW-12XXX HW-07XXX HW-12XXX HW-09XXX
HW-18XXX HW-08XXX HW-18XXX HW-08XXX
Quantity 1 1 1 1 1 1 4
105
REPAIRING
Before asking for service, check the following first.
Phenomenon Cause or check points

The system does not
When unit is stopped,it won't restart immediately until
restart immediately.
3 minutes have elasped to protect the system.
When the electric plug is pulled out and reinserted,the
protection circuit will work for 3 minutes to protect the
air conditioner.
Noise is heard. During unit operation or at stop,a swishing or gurgling

noise may be heard.At first 2-3 minutes when unit starts
this noise is more noticeable.(This noise is generated by
refrigerant flowing in the systen.)
During unit operation, a cracking noise may be heard.
This noise is generated by the casing expanding or shrinking
Normal because of temperature changes.
Performance Should there be a big noise from air flow in unit operation,
inspection air filter may be too dirty.
This is because the system circulates smells from the

Smells are generated. interior air such as the smell of furniture, cigarettes.
Mist or steam are During COOL or DRY operation,indoor unit may blow
blown out. out mist.This is due to the sudden cooling of indoor air.
Does not work at all

ls electric plug inserted?
Double ls there a power failure?
check ls fuse blown out?
ls the air filter dirty? Normally it should be cleaned every

Poor cooling
15 days.
Are there any obstacles in intet and outlet?
ls temperature set correctly?
Are there some doors or windows left open?
ls there any direct sunlight through the window during the
cooling operation?(Use curtain)
Are there too much heat sources or too many people in the
room during cooling operation?
Application temp. range of air conditioner -7 ~43 .
106
Cooling capability curve
Compressor QX-13,QX-13A Mark A B C D E

description
Condensing 40.5 45 50 54.4 60
Power 1PH 220V 50Hz TEMP C
Return Gas 35 35 35 35 35
Running 17.5 F TEMP C
capacitor Supper cooling
TEMP C 32.2 36.7 41.7 46.1 51.7
Refrigerator R22 Compressor Forled
cooling cooling Ambient 35 35 35 35 35
TEMP C
3000
Cooling capability
AB
2500 C
D
E
2000
1500
1000
(kcal/h)
500
1000
900
Power inputy
E
800 D
C
700
B
600 A
500
(W)
4.5
Current
E
4
D
3.5
C
3 B
(A) A
2.5
Evaperate TEMP -10 0 10
107
Cooling capability curve
Compressor QX-16,QX-16A Mark A B C D E

description
Condensing 40.5 45 50 54.4 60
Power 1PH 220V 50Hz TEMP C
Return Gas 35 35 35 35 35
Running 20 F TEMP C
capacitor Supper cooling
TEMP C 32.2 36.7 41.7 46.1 51.7
Refrigerator R22 Compressor Forled
cooling cooling Ambient 35 35 35 35 35
TEMP C
3500
Cooling capability
3000 AB
C
D
2500 E
2000
1500
(kcal/h)
1000
1100
1000 E
Power inputy
900 D
C
800
B
700 A
600
(W)
5.5
5
Current
E
4.5
D
4
C
3.5 B
(A) A
3
Evaperate TEMP -10 0 10

108
Mechanical curve of motor
1.8
1.7
1.6
1.5
1.4 A
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6 20 15 10 5
0.5
0.4
0.3
0.2
500 600 700 800 900 990
109
Mechanical curve of motor
A
1.7
1.6
1.5
1.4 20 15 10
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
600 700 800 900 1000 1100 1200
110
Sincere Forever
Haier Group
Tel :86-532-8938356
Web site : http://www.haier.com

Haier Haier: HW-12C03 HW-12HA03 HW-12C03 HW-12HA03

Uploaded by

Copyright:

Available Formats

Haier Haier: HW-12C03 HW-12HA03 HW-12C03 HW-12HA03

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Haier Haier: HW-12C03 HW-12HA03 HW-12C03 HW-12HA03

Uploaded by

Copyright:

Available Formats

Haier

4.MAIN COMPONENTS AND ACCESSORIES

77.THE FUNCTION OF ELECTRIC

Machine Model No.:

HW-07CA03, HW-07HA03, HW-07CA12, HW-09C03

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

a model code rule description

1.1 Model identification:

Item UNIT HW-09C03 HW-09CD03

Item UNIT HW-09CE03 HW-09HA03

Item UNIT HW-12C03 AW122AAMCA HW-12C13 AW124AAMBA

Starting method CSR

Item UNIT HW-12HA04 HW-12eA04

Starting method CSR CSR

Item UNIT AW094AAMBA AW122AAMBA

Starting method CSR

Starting method PSC PSC

Item UNIT HW-18HA03 HW-18CA13

Starting method PSC

Item UNIT AW222AAAAA AW222AAMAA

Starting method 88-1-8Mf/250 VAC

Model HW-24C03 HW-24CA03 HW-24CA13 AW222AAAAA

cooling Running current A 15.8 15.8 14.7

Sound Indoor unit dB(A) 61/57/55 61/57/55 61/57/55 58

Packaging Indoor unit mm 945x761x560 945x761x560 945x761x560 945x761x560

Model AW242AAAAB AW248AAAAA AW248AQAAA

Packaging Indoor unit mm 945x761x560 945x761x560 945x761x560

Type of Indoor unit Acentric fan Acentric fan Acentric fan

Model AW222AA AW244AA AW244AAM AW248AAABA

Packaging Indoor unit mm 945x761x560 945x761x560 945x761x560 945x761x560

HW-09CD03 HW-12C03 HW-12EA03

AW182AAAAB AW244AAMBA AW244AAMAB AW052AAAAB

HW-18CE03 Air outlet (indoor side )

Operation panel cover

Operation panel cover

Air outlet Air outlet

Air inlet Operation

Air outlet (indoor side )

Operation panel cover

Air outlet (indoor side )

Operation panel cover

Fresh air knob

HW-07CA12 HW-08C12 HW-09C03

Air outlet (indoor side )

Air outlet (indoor side)

Fresh air knob

HW-18CB03 HW-18C03(T3) HW-18CA13 HW-18C13(T3)

Model A(mm) B(mm) C(mm)

HW-24C03 700 870 460

Model A(mm) B(mm) C(mm)

Description of the parts

Inlet grating of air Oulet grating of air

Operation mode indicator

Auxiliary heat indicator Time indicator

Air outlet (indoor side)

Power indicator Operation mode indicator

POWER TIMER OPERATION

WIRELESS REMOTE CONTROL