GL50AA.

02
PRODUCT SPECIFICATION

OPERATION:

Application: L.B.P. Max. Ambient Temp: 43°C

Refrigerant: R134a
(1) Max. Steady Discharge Temp: 120°C
Operation: Capillary (1,2) Max. Peak Discharge Temp: 135°C
Cooling: Static Max. Steady Condensing Temp: 60°C
(2) Max. Peak Condensing Temp: 70°C
Max. Winding Temp: 130°C

Max. Impurities: 30 mg
Max.Total Compressor Water Content: 100 mg

COMPRESSOR:

Displacement: 5.46 cc Oil Type: Ester

Bore: 20.88 mm (4) Viscosity: 15 cSt
Stroke: 14.94 mm Suction Muffler: Semi-direct

(3) Net Wt: 8,9 kg

Case Size: 2 (h = 175 mm) h
Oil Charge: 210 cc

ELECTRICAL:

Power Supply: 220 - 240V Motor Type: RSIR / RSCR *

Voltage Limits: 187 - 264V
Frequency: 50 Hz Locked Rotor Current: 8.5 / 4.0 A**
Phase: 1 ph

Main Winding Resistance at 25°C: 22.8 Ω

Start Winding Resistance at 25°C: 27.1 Ω

* With Optional Run Capacitor

** Maximum current / Measured after 4 seconds
For rated performance,
(1) Measured 5cm. from the shell with insulated thermocouples the suction line must be connected to the stub
(2) For transient conditions during 'Pull Down' marked 'AS' on the attached drawing.
(3) Net weight is with oil but without electrics
(4) Measured at 40°C

AE 0212.13 Apr '07 Page 1 ACC reserves the right to change the data without prior notice
 GL50AA.02
PRODUCT SPECIFICATION

ELECTRICAL COMPONENTS:

ECC Starting Device: K 100-xx -xx Protector short code

Starting Device: PTC- 8100 UH Starting Device: PTC- 3003-x
(1) Starting Device: PTC - 7100DF UH PTC Resistance: 14 Ω
PTC Resistance: 14 Ω Alt. UH Starting Device: PTC- 3001-x

Run Capacitor: 3.0 µF -x PTC code for different contact versions

PROTECTORS: BDG ¾ Electrica ¾ SENSATA ¾ SENSATA 4TM

Type AE 37 FU x T 0453 / xx MRP 318LZ xxxx 4TM 205 NFBYY xx
Open °C 115 - 125 °C 120 - 130 °C 115 - 125 °C 115 - 125 °C
Close °C 71 - 53 °C 70 - 52 °C 70 - 52 °C 70 - 52 °C
U.T.C 1.50 A 70 °C 1.46 A 70 °C 1.52 A 70 °C 1.54 A 70 °C
Time Check Current 5.90 A 5.20 A 5.90 A 6.0 A (5-15s)
Max. Current 13.0 A 8.0 A 13.0 A 13.6 A (2s max.)
Code (if any) FH C7 T1 6B

Type
Open °C
Close °C
U.T.C
Time Check Current
Max. Current
Code (if any)

Alt. protectors: AF 37 FU x MSP 318LZ xxxx

Code (if any) DF

Sensata 'xxxx' Codes: 3201 for terminal boards Mod.89,90 BDG 'x' Codes: 6 for terminal boards Mod.89,90
3166 for terminal board Mod.91 8 for terminal board Mod.91
3178 for UH protector with 6.3mm fast-on 4 for UH protector with 6.3mm fast-on
3175 for UH protector with M3.5 screw 5 for UH protector with M3.5 screw
Electrica 'xx' Codes: 74 for terminal boards Mod.89,90
26 for terminal board Mod.91
24 for UH protector with M3.5 screw
25 for UH protector with 6.3mm fast-on
Sensata 4TM 'xx' Codes: .. for different contact versions

4TM protectors are for use with UH and ECC terminal boards only.
Protectors with M 3.5 screws can be used on UH electric housings type SP-1454 (with connection board)
and SP-1821 (without connection board). See drawings ELECTRICAL ASSEMBLY (FOR UH) number FTC15;16;17;18.
¾ protectors with 6.3mm fast-on can only be used on UH electric housing type SP-1821 (without connection board).

AE 0212.13 Apr '07 Page 2 ACC reserves the right to change the data without prior notice
 GL50AA.02
PRODUCT SPECIFICATION

PERFORMANCE: (Graphs are at ASHRAE conditions) 220V 50Hz Without run capacitor
1,00
Amps
0,95 60°C COND.
0,90
55°C TEMP.
0,85
0,80 50°C
0,75 45°C
0,70 40°C
0,65
0,60
190
Input
Watts 175 60°C COND.
160
55°C TEMP.
145
50°C
130
45°C
115
40°C
100
85
1,90
C.o.P.
1,80 40°C TEMP.
1,70 45°C TEMP.
1,60 50°C
1,50 55°C
1,40
60°C
1,30
1,20
1,10
1,00
0,90
0,80
295
Capacity 40°C COND.
Watts270
45°C TEMP.

245 50°C
55°C
220 60°C

195

170

145
Test Conditions: ASHRAE CECOMAF
120 Condensing Temp: 55°C 55°C
Liquid Temp: 32°C 55°C
95 Gas Return Temp: 32°C 32°C
Ambient Temp: 32°C 32°C
70
-35 -30 -25 -20 -15 -10 -5
Evaporating Temperature (°C)

Evaporating Temperature °C -30 -25 -23,3 -20 -15 -10

ASHRAE: Capacity W 83 115 128 155 201 256
C.o.P. W/W 0,88 1,05 1,10 1,20 1,35 1,49

CECOMAF: Capacity W 67 94 126 164 208

C.o.P. W/W 0,71 0,85 0,98 1,10 1,21

Input Power W 94 110 116 129 149 172

Current A 0,68 0,73 0,75 0,79 0,86 0,94

AE 0212.13 Apr '07 Page 3 ACC reserves the right to change the data without prior notice
 GL50AA.02
PRODUCT SPECIFICATION

Circuit Diagram for Mod.90 Terminal Board Mounting Accessories

N L
Appliance,
Lights etc.
2
Motor
Thermostat
Protector
N L y
E 1

x
5 4
PTC 1 S 3
Relay
y 1
Run Capacitor
Wire Connection Fast-on where applicable
connectors x
x = 26mm or 28.5mm
Circuit Diagram for U.H. Terminal Board
y = 9mm or 10.3mm
Other sizes available
L N 1. Rubber grommet
Motor Thermostat 2. Sleeve
Protector 3. Washer
L N 1 4. Steel pin
5. Clip

PTC
Relay
Appliance,
Run Capacitor Wire Connection Lights etc. Recommended Transport
where applicable Positions when fitted into
appliances

Circuit Diagram for ECC Terminal Board Frontal Version

Appliance,
Lights etc.
Upright
Motor Thermostat
Protector
1
Electrics Up
E
L
Tubes Down
PTC
N

Compressor Label
5th S
Optional NL Electrical
Model Production
Run Capacitor Logo
Date Characteristics
where applicable

Refrigerant

< SUCTION

Bar Code Check

Digit

Manufacturer Version Serial Approvals

Number
AE 0212.13 Apr '07 Page 4 ACC reserves the right to change the data without prior notice