Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 47 views

    Me-666 A

    Uploaded by

    Therese Salvio
    The document contains 25 multiple choice questions related to materials engineering. Specifically, it covers topics like: - Equipment and procedures used for moisture content testing, sand cone testing, and CBR testing. - Standard sizes of orifices used in sand cone testing. - Minimum sample sizes required for moisture content testing and sieve analysis of fine and coarse aggregates depending on their maximum particle size. - Terms related to asphalt purity testing like asphaltene, petrolene and solubility. - Allowed surface irregularities when measured with a 3m straightedge for different pavement materials like subbase, subgrade and base course.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Me-666 A

    Uploaded by

    Therese Salvio
    47 views4 pages
    The document contains 25 multiple choice questions related to materials engineering. Specifically, it covers topics like: - Equipment and procedures used for moisture content testing, sand cone testing, and CBR testing. - Standard sizes of orifices used in sand cone testing. - Minimum sample sizes required for moisture content testing and sieve analysis of fine and coarse aggregates depending on their maximum particle size. - Terms related to asphalt purity testing like asphaltene, petrolene and solubility. - Allowed surface irregularities when measured with a 3m straightedge for different pavement materials like subbase, subgrade and base course.

    Original Title

    ME-666 A

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains 25 multiple choice questions related to materials engineering. Specifically, it covers topics like: - Equipment and procedures used for moisture content testing, sand cone testing, and CBR testing. - Standard sizes of orifices used in sand cone testing. - Minimum sample sizes required for moisture content testing and sieve analysis of fine and coarse aggregates depending on their maximum particle size. - Terms related to asphalt purity testing like asphaltene, petrolene and solubility. - Allowed surface irregularities when measured with a 3m straightedge for different pavement materials like subbase, subgrade and base course.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    47 views4 pages

    Me-666 A

    Uploaded by

    Therese Salvio
    The document contains 25 multiple choice questions related to materials engineering. Specifically, it covers topics like: - Equipment and procedures used for moisture content testing, sand cone testing, and CBR testing. - Standard sizes of orifices used in sand cone testing. - Minimum sample sizes required for moisture content testing and sieve analysis of fine and coarse aggregates depending on their maximum particle size. - Terms related to asphalt purity testing like asphaltene, petrolene and solubility. - Allowed surface irregularities when measured with a 3m straightedge for different pavement materials like subbase, subgrade and base course.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    MATERIALS ENGINEER EXAMINATION NO.

    1. sand cone, jug (at least 4 liters), guide plate, moisture cans, sand weighing scale, oven
    with temperature control, chisel, or digging tools, plastic bags and labeling materials (tag
    name), is use for?
    a. FDT
    b. Moisture Content
    c. Abrasion Test
    d. CBR Test

    2. What is the standard diameter of an orifice in FDT sand cone?


    a.1.7mm
    b. 2.7mm
    c.12.7mm
    d.25mm

    3. The two major components of concrete are _______and Mineral Aggregates.


    a. water
    b. fine sand
    c. paste
    d. none of the above

    4. What is the minimum sample for moisture content determination if the maximum size of
    particles is 50mm (2 inches)?
    a.20-1500kgs
    b. 25-1000kgs
    c. 50-1000kgs
    d. none of the above

    5. What is the minimum mass of field sample for a maximum size of fine aggregates at
    4.75mm (no.4)?
    a.25 lb
    b. 10 kgs
    c. a & b
    d.none of the above

    6. What is the minimum mass of field sample for a maximum size of fine aggregates at
    4.75mm (no.4)?
    a. 25 lb
    b. 10 kgs
    c. a & b
    d. none of the above

    7. What is minimum mass of field samples for coarse aggregate with a maximum nominal
    size of aggregates of 50mm (2 inches)?
    a.75kgs
    b. 100 kgs
    c. 150 kgs
    d.175 kgs

    8. What is minimum mass of field samples for coarse aggregate with a maximum nominal
    size of aggregates of 9.5mm (3/8”)?

    1
    a. 15kgs
    b. 10kgs
    c. 50 kgs
    d.25 kgs

    9. What is minimum mass of field samples for coarse aggregate with a maximum nominal
    size of aggregates of 12.5mm (1/2”)?
    a. 15kgs
    b. 10kgs
    c. 50 kgs
    d.25 kgs

    10. What is minimum mass of field samples for coarse aggregate with a maximum nominal
    size of aggregates of 19.0mm (3/4”)?
    a. 15kgs
    b. 10kgs
    c. 50 kgs
    d.25 kgs

    11. What is minimum mass of field samples for coarse aggregate with a maximum nominal
    size of aggregates of 25.0 mm (1”)?
    a. 110lbs
    b. 10kgs
    c. 25kgs
    d. a & c
    12. What is minimum mass of field samples for coarse aggregate with a maximum nominal
    size of aggregates of 37.5.0mm (1 1 /2”)?
    a. 110lbs
    b. 75kgs
    c. 85kgs
    d. a & c

    13. What is minimum mass of field samples for coarse aggregate with a maximum nominal
    size of aggregates of 63mm (2 1/2”)?
    a. 110lbs
    b. 125kgs
    c. 185kgs
    d. a & c

    14 What is minimum mass of field samples for coarse aggregate with a maximum nominal
    size of aggregates of 75mm (3”)?
    a. 110lbs
    b. 175kgs
    c. 185kgs
    d.150kgs

    15. What is minimum mass of field samples for coarse aggregate with a maximum nominal
    size of aggregates of 90mm (3 1/2”)?
    a. 110lbs
    b. 175kgs
    c. 185kgs
    d.150kgs
    2
    16. What is the minimum mass of coarse aggregates retained on the 2.0mm sieve shall be
    set a side for sieve analysis for 50mm (2 inches) particle size?
    2kgs
    b. 3kgs
    c. 4kgs
    d.5kgs

    17. What is the minimum mass of coarse aggregates retained on the 2.0mm sieve shall be
    set a side for sieve analysis for 25mm (1 inch) particle size?
    a. 2kgs
    b. 3kgs
    c. 4kgs
    d.5kgs

    18. What is the minimum mass of coarse aggregates retained on the 2.0mm sieve shall be
    set a side for sieve analysis for 75mm (3 inches) particle size?
    a. 2kgs
    b. 3kgs
    c. 4kgs
    d. 5kgs

    19. Determines the purity of asphalt on how much bitumen is in the aspahalt?
    a. asphaltene
    b. petrolene
    c. solubility
    d. none of the above

    20. The properties of asphalt depend upon this ________ substance which is soluble in
    petroleum solvents.
    a. asphaltene
    b. petrolene
    c. solubility
    d. none of the above

    21. Imparts ductility and high breakpoint


    a. asphaltene
    b. petrolene
    c. solubility
    d. none of the above

    22. The permitted variations in design requirements of aggregates subbase materials on


    surface irregularity measured by a 3m straight edge.
    a. +20mm
    b. +10mm
    c.-10mm
    d. a & c

    23. The permitted variations in design requirements of aggregates sub-grade materials on


    surface irregularity measured by a 3m straight edge.
    a. +20mm
    b. +10mm
    3
    c.-30mm
    d.-20 mm

    24. The permitted variations in design requirements of aggregates base course materials
    on surface irregularity measured by a 3 m straight edge.
    a.+5mm
    b. +10mm
    c.-5mm
    d.-20 mm

    25. The permitted variations in design requirements of item 203, 206, 300 materials on
    surface irregularity measured by a 3m straight edge.
    a.+20mm
    b. +5mm
    c.-5mm
    d.-20 mm

    You might also like