0% found this document useful (0 votes)

47 views

Oil Analysis File (OAN)

This document provides a summary of the file format for an oil analysis (OAN) file submitted to the Alberta Energy Regulator (AER). The file includes sections for file verification information, version details, well information, test data, oil sample properties, and a comment field. It lists each data field name, size, description, and any applicable business rules. In under 3 sentences, it outlines the key elements of an OAN file submitted to the AER for digital well test data.

Uploaded by

Said

Available Formats

Download as XLS, PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

47 views

Oil Analysis File (OAN)

Uploaded by

Said

Available Formats

Download as XLS, PDF, TXT or read online on Scribd

You are on page 1/ 70

OIL ANALYSIS FILE

(OAN)
~ FILE VERIFICATION
# (Information in this section is Assigned by the AER, and Appended to the PAS file upon Acceptance / Validation via WTC-Submit procedure)

WTCNUM [CHAR 13] AER WTC Tracking ID Will not be Blank, system will input AER-WTC Unique Certification number:
WTCDAT [YYYY MM DD HHHH] Submission/Acceptance Date Will not be Blank, system will input Date of WTC Verification & Acceptance
WTCSUB [CHAR 60] Submitter Will not be Blank, system will input Company whom Submitted Specific Well Test Data
COMP. [CHAR 60] Licensee Name Will not be Blank, system will input Based on Licensee

~ VERSION
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
PASTYPE. [CHAR 7] DIGITAL DATA - OIL ANALYSIS PAS-OAN Oil Analysis test, format
UNIT. [CHAR 1] UNITS FLAG (M)etric Metric Units for AER submission
VERS. [NUMB 5,2] AER DIGITAL WELL TEST DATA 4.00 Current AER version for ASCII test data submission

02/17/2022 Page 1 of 70 PAS File Formats

OIL ANALYSIS FILE
(OAN)
~ TEST DATA
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
LABCO. [CHAR 60] LABORATORY NAME Company name conducting analysis
LFNUM. [CHAR 25] LABORATORY FILE NUMBER Identification number
TTOPL.M [NUMB 6,2] TEST/PROD. INTERVAL TOP M KB (LOG) [TTOPL] (Interval Top - Log) must be > 0.0 and < Top of tested or producing interval - in log depth, measured mKB
[TBASL] (Interval Base - Log)
TBASL.M [NUMB 6,2] TEST/PROD. INTERVAL BASE M KB (LOG) [TBASL] (Interval Base - Log) must be > 0.0 and Base of tested or producing interval - in log depth, measured mKB
=> [TTOPL] (Interval Top - Log) and cannot be
greater than Total Well Depth.

SDAT.DAY [YYYY MM DD] DATE SAMPLED Must be >= Spud Date and <= Abandoned Date Date sample gathered
and <= Submission Date
IDENT. [CHAR 12] CONTAINER IDENTITY Identification code of container
SPNT. [NUMB 2] SAMPLE POINT CODE Mandatory, must be Valid AER Sample Point Code Sample gathering point
(See Footnote).
SPNTN. [CHAR 100] SAMPLE POINT NAME Laboratories Unique Text Description of Sample Gathering Point
ADAT.DAY [YYYY MM DD] DATE ANALYZED Must be >= [SDAT] (Sample Date) and <= Date Sample Analysis
Submission Date
SPRES.KPAA [NUMB 8,2] SAMPLE PRESSURE Optional, can not be zero Pressure as Sampled (in field) - kPaa
STEMP.DEGC [NUMB 5,2] SAMPLE TEMPERATURE Optional, can be zero Temperature as Sampled (in field) - DegC
RPRES.KPAA [NUMB 8,2] RECEIVED PRESSURE Optional, can not be zero Pressure as Received (in Lab) -kPaa
RTEMP.DEGC [NUMB 5,2] RECEIVED TEMPERATURE Optional, can be zero Temperature as Received (in Lab) - DegC
DSTLOC. [CHAR 1] DST SAMPLE LOCATION If [SPNT] (Sample Point Code) = (50) then
[DSTLOC] (DST Sample Location) must be (T)op,
(M)iddle, or (B)ottom. Else must be Null.

OANC. [CHAR 240] COMMENT ON SAMPLE Optional General Free form Comment (regarding Sample or Analytical
Procedures).

02/17/2022 Page 2 of 70 PAS File Formats

OIL ANALYSIS FILE
(OAN)
~ OIL SAMPLE PROPERTIES
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
CNAM. [CHAR 40] COLOUR OF CLEAN OIL Optional Colour of clean oil, by name
CNUM. [CHAR 20] COLOUR NUMBER Optional Colour number, by ASTM D-1500
BSWW.FRAC [NUMB 4,3] FRACTION OF WATER Optional, can be null or zero Basic sand and water volume fraction, of water
BSWS.FRAC [NUMB 4,3] FRACTION OF SEDIMENT Optional, can be null or zero Basic sand and water volume fraction, of sediment
BSW.FRAC [NUMB 4,3] FRACTION OF TOTAL BS&W Optional, can be null or zero Basic sand and water volume fraction, total
RDNRX. [NUMB 4,3] RELATIVE DENSITY AS RECEIVED Optional, can be null or zero Relative density as received
RDNCL. [NUMB 4,3] RELATIVE DENSITY AFTER CLEANING Optional, can be null or zero Relative density after cleaning
ADNRX.KG/M3 [NUMB 6,1] ABSOLUTE DENSITY AS RECEIVED Optional, can be null or zero Absolute density as received, kg/m3
ADNCL.KG/M3 [NUMB 6,1] ABSOLUTE DENSITY AFTER CLEANING Mandatory, can not be zero Absolute density after cleaning, kg/m3

API. [NUMB 6,2] API GRAVITY @ 15 DEGC Optional, can be null or zero API gravity @ 15 (Degrees Celsius)
TSUL.FRAC [NUMB 7,5] TOTAL SULPHUR MASS FRACTION If [TSUL.GM/KG] (Total Sulphur) is Null then Mass fraction of total sulphur
[TSUL.FRAC] (Total Sulphur Mass Fraction) is
mandatory (either must be present). Can be zero.

TSUL.GM/KG [NUMB 7,2] TOTAL SULPHUR If TSUL.FRAC is null then [TSUL.FRAC] (Total Ratio of total sulphur, gm/kg
Sulphur Mass Fraction) is mandatory (either must
be present). Can be zero

TSALT.KG/M3 [NUMB 7,5] TOTAL SALT Optional, can be null or zero Salt kg/m3
RVP.KPAA [NUMB 8,2] REID VAPOUR PRESSURE Optional, can be null or zero Reid Vapour Pressure, kPaa
CONRD.FRAC [NUMB 8,2] CARBON RISIDUE CONRADSON Optional, can be null or zero Carbon Risidue, mass fraction - Conradson
FRACTION
RAMBT.FRAC [NUMB 8,2] CARBON RISIDUE RAMSBOTTOM Optional, can be null or zero Carbon Risidue, mass fraction - Ramsbottom
FRACTION
PPTUSBM.DEGC [NUMB 5,2] POUR POINT U.S.B.M. STANDARD DEGC Optional, can be null, negative or zero Pour Point U.S.B.M. standard - (Degrees Celsius)

PPTASTM.DEGC [NUMB 5,2] POUR POINT A.S.T.M. STANDARD DEGC Optional, can be null, negative or zero Pour Point A.S.T.M. standard - (Degrees Celsius)

02/17/2022 Page 3 of 70 PAS File Formats

OIL ANALYSIS FILE
(OAN)
~ OIL VISCOSITY
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
UT1.DEGC [NUMB 2] VISCOSITY TEMPERATURE POINT 1 Must be > 0 Viscosity temperature point 1, (Degrees Celsius)
UAB1.MPA’S [NUMB 11,3] ABSOLUTE/DYNAMIC VISCOSITY AT Must be > 0.00 Absolute/Dynamic viscosity at point 1, mPa's
POINT 1
UKIN1.MM2/S [NUMB 11,3] KINEMATIC VISCOSITY AT POINT 1 Must be > 0.00 Kinematic viscosity at point 1, mm2/s
UT2.DEGC [NUMB 2] VISCOSITY TEMPERATURE POINT 2 Optional. If present, must be > 0. Must be reported Viscosity temperature point 2, (Degrees Celsius)
if established
UAB2.MPA’S [NUMB 11,3] ABSOLUTE/DYNAMIC VISCOSITY AT Optional. If present, must be > 0.00. Must be Absolute/Dynamic viscosity at point 2, mPa's
POINT 2 reported if established
UKIN2.MM2/S [NUMB 11,3] KINEMATIC VISCOSITY AT POINT 2 Optional. If present, must be > 0.00. Must be Kinematic viscosity at point 2, mm2/s
reported if established
UT3.DEGC [NUMB 2] VISCOSITY TEMPERATURE POINT 3 Optional. If present, must be > 0. Must be reported Viscosity temperature point 3, (Degrees Celsius)
if established
UAB3.MPA’S [NUMB 11,3] ABSOLUTE/DYNAMIC VISCOSITY AT Optional. If present, must be > 0.00. Must be Absolute/Dynamic viscosity at point 3, mPa's
POINT 3 reported if established
UKIN3.MM2/S [NUMB 11,3] KINEMATIC VISCOSITY AT POINT 3 Optional. If present, must be > 0.00. Must be Kinematic viscosity at point 3, mm2/s
reported if established
UT4.DEGC [NUMB 2] VISCOSITY TEMPERATURE POINT 4 Optional. If present, must be > 0. Must be reported Viscosity temperature point 4, (Degrees Celsius)
if established
UAB4.MPA’S [NUMB 11,3] ABSOLUTE/DYNAMIC VISCOSITY AT Optional. If present, must be > 0.00. Must be Absolute/Dynamic viscosity at point 4, mPa's
POINT 4 reported if established
UKIN4.MM2/S [NUMB 11,3] KINEMATIC VISCOSITY AT POINT 4 Optional. If present, must be > 0.00. Must be Kinematic viscosity at point 4, mm2/s
reported if established
UT5.DEGC [NUMB 2] VISCOSITY TEMPERATURE POINT 5 Optional. If present, must be > 0. Must be reported Viscosity temperature point 5, (Degrees Celsius)
if established
UAB5.MPA’S [NUMB 11,3] ABSOLUTE/DYNAMIC VISCOSITY AT Optional. If present, must be > 0.00. Must be Absolute/Dynamic viscosity at point 5, mPa's
POINT 5 reported if established
UKIN5.MM2/S [NUMB 11,3] KINEMATIC VISCOSITY AT POINT 5 Optional. If present, must be > 0.00. Must be Kinematic viscosity at point 5, mm2/s
reported if established
UT6.DEGC [NUMB 2] VISCOSITY TEMPERATURE POINT 6 Optional. If present, must be > 0. Must be reported Viscosity temperature at point 6, (Degrees Celsius)
if established
UAB6.MPA’S [NUMB 11,3] ABSOLUTE/DYNAMIC VISCOSITY AT Optional. If present, must be > 0.00. Must be Absolute/Dynamic viscosity at point 6, mPa's
POINT 6 reported if established
UKIN6.MM2/S [NUMB 11,3] KINEMATIC VISCOSITY AT POINT 6 Optional. If present, must be > 0.00. Must be Kinematic viscosity at point 6, mm2/s
reported if established

02/17/2022 Page 4 of 70 PAS File Formats

OIL ANALYSIS FILE
(OAN)
~ OIL DISTILLATION
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
IBP.DEGC [NUMB 5,2] INITIAL BOILING POINT TEMPERATURE Optional, must be reported if established Initial boiling point temperature, (Degrees Celsius)

DVL1.FRAC [NUMB 4,2] VOLUME FRACTION POINT 1 Optional, must be reported if established Distillation volume fraction 1
DTP1.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 1 Optional, must be reported if established Distillation volume temperature 1, (Degrees Celsius)
DVL2.FRAC [NUMB 4,2] VOLUME FRACTION POINT 2 Optional, must be reported if established Distillation volume fraction 2
DTP2.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 2 Optional, must be reported if established Distillation volume temperature 2, (Degrees Celsius)
DVL3.FRAC [NUMB 4,2] VOLUME FRACTION POINT 3 Optional, must be reported if established Distillation volume fraction 3
DTP3.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 3 Optional, must be reported if established Distillation volume temperature 3, (Degrees Celsius)
DVL4.FRAC [NUMB 4,2] VOLUME FRACTION POINT 4 Optional, must be reported if established Distillation volume fraction 4
DTP4.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 4 Optional, must be reported if established Distillation volume temperature 4, (Degrees Celsius)
DVL5.FRAC [NUMB 4,2] VOLUME FRACTION POINT 5 Optional, must be reported if established Distillation volume fraction 5
DTP5.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 5 Optional, must be reported if established Distillation volume temperature 5, (Degrees Celsius)
DVL6.FRAC [NUMB 4,2] VOLUME FRACTION POINT 6 Optional, must be reported if established Distillation volume fraction 6
DTP6.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 6 Optional, must be reported if established Distillation volume temperature 6, (Degrees Celsius)
DVL7.FRAC [NUMB 4,2] VOLUME FRACTION POINT 7 Optional, must be reported if established Distillation volume fraction 7
DTP7.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 7 Optional, must be reported if established Distillation volume temperature 7, (Degrees Celsius)
DVL8.FRAC [NUMB 4,2] VOLUME FRACTION POINT 8 Optional, must be reported if established Distillation volume fraction 8
DTP8.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 8 Optional, must be reported if established Distillation volume temperature 8, (Degrees Celsius)
DVL9.FRAC [NUMB 4,2] VOLUME FRACTION POINT 9 Optional, must be reported if established Distillation volume fraction 9
DTP9.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 9 Optional, must be reported if established Distillation volume temperature 9, (Degrees Celsius)
DVL10.FRAC [NUMB 4,2] VOLUME FRACTION POINT 10 Optional, must be reported if established Distillation volume fraction 10
DTP10.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 10 Optional, must be reported if established Distillation volume temperature 10, (Degrees Celsius)
DVL11.FRAC [NUMB 4,2] VOLUME FRACTION POINT 11 Optional, must be reported if established Distillation volume fraction 11
DTP11.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 11 Optional, must be reported if established Distillation volume temperature 11, (Degrees Celsius)
DVL12.FRAC [NUMB 4,2] VOLUME FRACTION POINT 12 Optional, must be reported if established Distillation volume fraction 12
DTP12.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 12 Optional, must be reported if established Distillation volume temperature 12, (Degrees Celsius)
DVL13.FRAC [NUMB 4,2] VOLUME FRACTION POINT 13 Optional, must be reported if established Distillation volume fraction 13
DTP13.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 13 Optional, must be reported if established Distillation volume temperature 13, (Degrees Celsius)
DVL14.FRAC [NUMB 4,2] VOLUME FRACTION POINT 14 Optional, must be reported if established Distillation volume fraction 14
DTP14.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 14 Optional, must be reported if established Distillation volume temperature 14, (Degrees Celsius)
DVL15.FRAC [NUMB 4,2] VOLUME FRACTION POINT 15 Optional, must be reported if established Distillation volume fraction 15
DTP15.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 15 Optional, must be reported if established Distillation volume temperature 15, (Degrees Celsius)
DVL16.FRAC [NUMB 4,2] VOLUME FRACTION POINT 16 Optional, must be reported if established Distillation volume fraction 16
DTP16.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 16 Optional, must be reported if established Distillation volume temperature 16, (Degrees Celsius)
DVL17.FRAC [NUMB 4,2] VOLUME FRACTION POINT 17 Optional, must be reported if established Distillation volume fraction 17
DTP17.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 17 Optional, must be reported if established Distillation volume temperature 17, (Degrees Celsius)
DVL18.FRAC [NUMB 4,2] VOLUME FRACTION POINT 18 Optional, must be reported if established Distillation volume fraction 18
DTP18.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 18 Optional, must be reported if established Distillation volume temperature 18, (Degrees Celsius)

02/17/2022 Page 5 of 70 PAS File Formats

OIL ANALYSIS FILE
(OAN)
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
DVL19.FRAC [NUMB 4,2] VOLUME FRACTION POINT 19 Optional, must be reported if established Distillation volume fraction 19
DTP19.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 19 Optional, must be reported if established Distillation volume temperature 19, (Degrees Celsius)
DVL20.FRAC [NUMB 4,2] VOLUME FRACTION POINT 20 Optional, must be reported if established Distillation volume fraction 20
DTP20.DEGC [NUMB 5,2] VOLUME TEMPERATURE POINT 20 Optional, must be reported if established Distillation volume temperature 20, (Degrees Celsius)
FBP.DEGC [NUMB 5,2] FINAL BOILING POINT TEMPERATURE Optional, must be reported if established Final boiling point temperature, (Degrees Celsius)

CRKBP.DEGC [NUMB 5,2] CRACKED BOILING POINT Optional, must be reported if established Cracked boiling point temperature, (Degrees Celsius)
TEMPERATURE

~ METHODS AND SUMMARIES

# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
METHD. [CHAR 20] DISTILLATION METHOD Optional, can be null Method used in distillation
PBARA.KPAA [NUMB 4,1] ABSOLUTE BAROMETRIC PRESSURE Optional, can be null Absolute barometric pressure, kPaa

TROOM.DEGC [NUMB 5,2] ROOM TEMPERATURE Optional, can be null. If present, must be > 0 and < Lab room temperature, (Degrees Celsius)
45
DVLNP.FRAC [NUMB 4,2] NAPHTHA SUMMARY VOLUME FRACTION Optional, can be zero or null Naphtha fraction

DVLKR.FRAC [NUMB 4,2] KEROSENE SUMMARY VOLUME Optional, can be zero or null Kerosene fraction
FRACTION
DVLGO.FRAC [NUMB 4,2] LIGHT GAS/OIL SUMMARY VOLUME Optional, can be zero or null Light gas/oil fraction
FRACTION
DVLRC.FRAC [NUMB 4,2] RECOVERED SUMMARY VOLUME Optional, can be zero or null Recovered fraction
FRACTION
DVLRS.FRAC [NUMB 4,2] RESIDUE SUMMARY VOLUME FRACTION Optional, can be zero or null Residue fraction

DVLLS.FRAC [NUMB 4,2] LOSS SUMMARY VOLUME FRACTION Optional, can be zero or null Distillation loss fraction
CFACT. [NUMB 5,1] CHARACTERIZATION FACTOR Optional, can be zero or null
GCOM. [CHAR 240] GENERAL COMMENT Optional, can be null Free form general comment

02/17/2022 Page 6 of 70 PAS File Formats

OIL ANALYSIS FILE
(OAN)
Sample Point Codes (SPNT)

20 First Stage Separator

25 Second Stage Separator
30 Wellhead
35 Meter Run
40 Pressure Tank
45 Downhole Samplers - Post Drilling (i.e. RFT's, MDT's etc.)
50 DST
60 Tubing
70 Other (Miscellaneous)

GENERAL EDITS

ALL Mnemonic Values are Mandatory, unless otherwise noted.

02/17/2022 Page 7 of 70 PAS File Formats

WATER ANALYSIS FILE
(WAN)
~ FILE VERIFICATION
# (Information in this section is Assigned by the AER, and Appended to the PAS file upon Acceptance / Validation via WTC-Submit procedure)

~ VERSION
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
PASTYPE. [CHAR 7] DIGITAL DATA - WATER ANALYSIS PAS-WAN Water Analysis test, format
UNIT. [CHAR 1] UNITS FLAG (M)etric Metric Units for AER submission
VERS. [NUMB 5,2] AER DIGITAL WELL TEST DATA 4.00 Current AER version for ASCII test data submission

~ TEST DATA
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
LABCO. [CHAR 60] LABORATORY NAME Company name conducting analysis
LFNUM. [CHAR 25] LABORATORY FILE NUMBER Identification number
TTOPL.M [NUMB 6,2] TEST/PROD. INTERVAL TOP M KB (LOG) [TTOPL] (Interval Top - Log) must be > 0.0 and < Top of tested or producing interval - in log depth, measured mKB
[TBASL] (Interval Base - Log)
TBASL.M [NUMB 6,2] TEST/PROD. INTERVAL BASE M KB (LOG) [TBASL] (Interval Base - Log) must be > 0.0 and Base of tested or producing interval - in log depth, measured mKB
=> [TTOPL] (Interval Top - Log) and cannot be
greater than Total Well Depth.

SDAT.DAY [YYYY MM DD] DATE SAMPLED Must be >= Spud Date and <= Abandoned Date Date sample gathered
and <= Submission Date
IDENT. [CHAR 12] CONTAINER IDENTITY Identification code of container

02/17/2022 Page 8 of 70 PAS File Formats

WATER ANALYSIS FILE
(WAN)
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
SPNT. [NUMB 2] SAMPLE POINT CODE Mandatory, must be Valid AER Sample Point Code Sample gathering point
(See Footnote).
SPNTN. [CHAR 50] SAMPLE POINT NAME Laboratories Unique Text Description of Sample Gathering Point
ADAT.DAY [YYYY MM DD] DATE ANALYZED Must be >= [SDAT] (Sample Date) and <= Date Sample Analysis
Submission Date
SPRES.KPAA [NUMB 8,2] SAMPLE PRESSURE Optional, if present can not be zero Pressure as Sampled (in field) - kPaa
STEMP.DEGC [NUMB 5,2] SAMPLE TEMPERATURE Optional, if present can not be zero Temperature as Sampled (in field) - DegC
RPRES.KPAA [NUMB 8,2] RECEIVED PRESSURE Optional, if present can not be zero Pressure as Received (in Lab) -kPaa
RTEMP.DEGC [NUMB 5,2] RECEIVED TEMPERATURE Optional, if present can not be zero Temperature as Received (in Lab) - DegC
DSTLOC. [CHAR 1] DST SAMPLE LOCATION If [SPNT] (Sample Point Code) = (50) then
[DSTLOC] (DST Sample Location) must be (T)op,
(M)iddle, or (B)ottom. Else must be Null.

WANC. [CHAR 240] COMMENT ON SAMPLE Optional General Free form Comment (regarding Sample or Analytical
Procedures).

~ WATER CATIONS
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
NA.MG/L [NUMB 9,2] SODIUM CATION Mandatory, can be zero Sodium mg/L
NA.MEQ/L [NUMB 9,2] SODIUM CATION CONCENTRATION Mandatory, can be zero Sodium milli-equivalent
K.MG/L [NUMB 9,2] POTASSIUM CATION Mandatory, can be zero Potassium mg/L
K.MEQ/L [NUMB 9,2] POTASSIUM CATION CONCENTRATION Mandatory, can be zero Potassium milli-equivalent

CA.MG/L [NUMB 9,2] CALCIUM CATION Mandatory, can be zero Calcium mg/L
CA.MEQ/L [NUMB 9,2] CALCIUM CATION CONCENTRATION Mandatory, can be zero Calcium milli-equivalent
MG.MG/L [NUMB 9,2] MAGNESIUM CATION Mandatory, can be zero Magnesium mg/L
MG.MEQ/L [NUMB 9,2] MAGNESIUM CATION CONCENTRATION Mandatory, can be zero Magnesium milli-equivalent
BA.MG/L [NUMB 9,2] BARIUM CATION Optional, can be zero Barium mg/L
BA.MEQ/L [NUMB 9,2] BARIUM CATION CONCENTRATION Optional, can be zero Barium milli-equivalent
SR.MG/L [NUMB 9,2] STRONTIUM CATION Optional, can be zero Strontium mg/L
SR.MEQ/L [NUMB 9,2] STRONTIUM CATION CONCENTRATION Optional, can be zero Strontium milli-equivalent

FE.MG/L [NUMB 9,2] IRON CATION Optional, can be zero Iron mg/L
FE.MEQ/L [NUMB 9,2] IRON CATION Optional, can be zero Iron milli-equivalent
CONCENTRATION
MN.MG/L [NUMB 9,2] MANGANESE CATION Optional, can be zero Manganese mg/L
MN.MEQ/L [NUMB 9,2] MANGANESE CATION CONCENTRATION Optional, can be zero Manganese milli-equivalent
B.MG/L [NUMB 9,2] BORON CATION Optional, can be zero Boron mg/L
B.MEQ/L [NUMB 9,2] BORON CATION CONCENTRATION Optional, can be zero Boron milli-equivalent

02/17/2022 Page 9 of 70 PAS File Formats

WATER ANALYSIS FILE
(WAN)
~ WATER ANIONS
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
CL.MG/L [NUMB 9,2] CHLORIDE ANION Mandatory, can be zero Chloride mg/L
CL.MEQ/L [NUMB 9,2] CHLORIDE ANION CONCENTRATION Mandatory, can be zero Chloride milli-equivalent
BR.MG/L [NUMB 9,2] BROMIDE ANION Optional, can be zero Bromide mg/L
BR.MEQ/L [NUMB 9,2] BROMIDE ANION CONCENTRATION Optional, can be zero Bromide milli-equivalent
I.MG/L [NUMB 9,2] IODIDE ANION Optional, can be zero Iodide mg/L
I.MEQ/L [NUMB 9,2] IODIDE ANION CONCENTRATION Optional, can be zero Iodide milli-equivalent
HCO3.MG/L [NUMB 9,2] BICARBONATE ANION Mandatory, can be zero Bicarbonate mg/L
HCO3.MEQ/L [NUMB 9,2] BICARBONATE ANION CONCENTRATION Mandatory, can be zero Bicarbonate milli-equivalent
SO4.MG/L [NUMB 9,2] SULPHATE ANION Mandatory, can be zero Sulphate mg/L
SO4.MEQ/L [NUMB 9,2] SULPHATE ANION CONCENTRATION Mandatory, can be zero Sulphate milli-equivalent
CO3.MG/L [NUMB 9,2] CARBONATE ANION Mandatory, can be zero Carbonate mg/L
CO3.MEQ/L [NUMB 9,2] CARBONATE ANION CONCENTRATION Mandatory, can be zero Carbonate milli-equivalent

OH.MG/L [NUMB 9,2] HYDROXIDE ANION Mandatory, can be zero Hydroxide mg/L
OH.MEQ/L [NUMB 9,2] HYDROXIDE ANION CONCENTRATION Mandatory, can be zero Hydroxide milli-equivalent

~ WATER SOLIDS AND OTHER MEASUREMENTS

# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
DS110.MG/L [NUMB 9,2] TOTAL DISSOLVED SOLIDS EVAPORATED Optional, can be zero mg/L
@ 110 DEGC
DS180.MG/L [NUMB 9,2] TOTAL DISSOLVED SOLIDS EVAPORATED Optional, can be zero mg/L
@ 180 DEGC
H2S.MG/L [NUMB 9,2] HYDROGEN SULPHIDE Mandatory, can be zero H2S mg/L
DSING.MG/L [NUMB 9,2] TOTAL DISSOLVED SOLIDS AT IGNITION Optional, can be zero mg/L

DSCAL.MG/L [NUMB 9,2] TOTAL DISSOLVED SOLIDS CALCULATED Must be > 0.0 mg/L

RDWTR. [NUMB 4,3] RELATIVE DENSITY Optional, can be zero

RDTMP.DEGC [NUMB 5,2] RELATIVE DENSITY TEMPERATURE Optional, can be zero Temperature whereby relative density measured, Degrees Celsius
RFIDX. [NUMB 5,2] DEGC
REFRACTIVE INDEX Optional, can be zero Refractive index
RFTMP.DEGC [NUMB 5,2] REFRACTIVE INDEX TEMPERATURE Optional, can be zero Temperature whereby refractive index measured, Degrees Celsius

PHOBS. [NUMB 4,1] OBSERVED PH Must be > 0.0 Observed pH

PHTMP.DEGC [NUMB 5,2] OBSERVED PH TEMPERATURE Must be > 0.0 Temperature whereby pH observed, Degrees Celsius
PEOHM. [NUMB 7,2] RESISTIVITY Optional, can be zero Resistivity, Ohm-Meters
PETMP.DEGC [NUMB 5,2] RESISTIVITY TEMPERATURE Optional, can be zero Temperature whereby Resistivity measured, Degrees Celsius
SALT.PCT [NUMB 5,2] SALINITY TOTAL PERCENTAGE Optional, can be zero
GCOM. [CHAR 240] GENERAL COMMENT Optional, can be zero Free form general comment

02/17/2022 Page 10 of 70 PAS File Formats

WATER ANALYSIS FILE
(WAN)
Sample Point Codes (SPNT)

20 First Stage Separator

25 Second Stage Separator
30 Wellhead
35 Meter Run
40 Pressure Tank
45 Downhole Samplers - Post Drilling ( i.e. RFT's, MDT's etc.)
50 DST
60 Tubing
70 Other (Miscellaneous)

GENERAL EDITS

ALL Mnemonic Values are Mandatory, unless otherwise noted.

02/17/2022 Page 11 of 70 PAS File Formats

DRILL STEM TEST FILE
(DST)
~ FILE VERIFICATION
# (Information in this section is Assigned by the AER, and Appended to the PAS file upon Acceptance / Validation via WTC-Submit procedure)

~ VERSION
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
PASTYPE. [CHAR 7] DIGITAL DATA - DST TEST DATA PAS-DST Drill Stem Test, format
UNIT. [CHAR 1] UNITS FLAG (M)etric Metric Units for AER submission
VERS. [NUMB 5,2] AER DIGITAL WELL TEST DATA 4.00 Current AER version for ASCII test data submission

FORM. [CHAR 20] FORMATION NAME Name of the geological formation/zone

FLEXP. [NUMB 2] FLUID TYPE EXPECTED Must have a valid AER fluid code = (01) Oil, (02) Type of Dominant Fluid Production/Pay (i.e. oil well, gas well, water
Gas, (06) Water, or (17) Crude Bitumen well) Predominant fluid type needed to define as oil or gas test

WTYP. [CHAR 1] WELL TYPE INDICATOR Mandatory, if [PRPS] (Purpose Indicator) = (I)nitial. Flag indicating (V)ertical, (D)eviated, or (H)orizontal Wellbore
Must be (V)ertical, (D)eviated or (H)orizontal

DPID.MM [NUMB 4,1] DRILL PIPE ID Must be < 200 Inside diameter of drilling pipe (mm)

02/17/2022 Page 12 of 70 PAS File Formats

DRILL STEM TEST FILE
(DST)
~ TEST DATA
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
PRPS. [CHAR 1] TEST PURPOSE Mandatory, must be (I)nitial pressure or (O)ther. (I)nitial designates test for the fulfillment of AER Guide 40, Initial
Pressure Testing Regulatory Requirements. (O)ther indicates to
comply exclusively with Oil & Gas Conservation Regulation 11.100,
whereby all DST's must be submitted within 30 days of the Finished
Drilling date.

SERCO. [CHAR 5] SERVICE COMPANY CODE Company conducting test (see AER Website)
CCCO. [CHAR 20] CLOSED CHAMBER COMPANY Mandatory, if [TTYP] (DST Test Type Code) = (08) Name of Company Conducting Closed Chamber Test
or (18).
TTYP. [CHAR 2] DST TEST TYPE CODE Must be Valid AER PAS-DST Test Code (See
Footnote).
RUNUM. [NUMB 2] RUN NUMBER Run Number / Trip Number into Hole - for Testing
TNUM. [NUMB 4] DST NUMBER DST Number (i.e. DST no.3)
H2SIND. [CHAR 1] H2S INDICATOR Must be (Y)es or (N)one. Flag indicating presence of H2S
TTOPL.M [NUMB 6,2] TEST/PROD INTERVAL TOP M KB (LOG) [TTOPL] (Interval Top - Log) must be > 0.0 and < Top of tested or producing interval - in log depth, measured mKB
[TBASL] (Interval Base - Log)

TBASL.M [NUMB 6,2] TEST/PROD INTERVAL BASE M KB (LOG) [TBASL] (Interval Base - Log) must be > 0.0 and Base of tested or producing interval - in log depth, measured mKB
=> [TTOPL] (Interval Top - Log) and cannot be
greater than Total Well Depth.

TTOPT.M [NUMB 6,2] TEST/PROD INTERVAL TOP M KB (TVD) If [PRPS] (Purpose Indicator) = (I)nitial. If [WTYP] Top of tested or producing interval - in true vertical depth,
(Well Type Indicator) = (D)eviated or (H)orizontal, calculated mKB
then [TTOPT] (Interval Top - TVD) must be <
[TTOPL] (Interval Base - Log), else if [WTYP] =
(V)ertical, then [TTOPT] must = [TTOPL]

TBAST.M [NUMB 6,2] TEST/PROD INTERVAL BASE M KB (TVD) If [PRPS] (Purpose Indicator) = (I)nitial. If [WTYP] Base of tested or producing interval in true vertical depth,
(Well Type Indicator) = (D)eviated or (H)orizontal, calculated mKB
then [TBAST] (Interval Base - TVD) must be <
[TBASL] (Interval Base - Log), else if [WTYP] =
(V)ertical, then [TBAST] must = [TBASL]

FTDT.DAY/HR [YYYY MM DD HHHH] TEST FINAL DATE/TIME Must be >= Spud Date and <= Abandoned Date Date/Time test ended
and <= Submission Date
MSRN. [CHAR 1] TEST MISRUN INDICATOR Must be (Y)es or (N)o. If [MSRN] = (Y)es then Flag indicating Misrun of Test
[PRPS] (Test Purpose) must = (O)ther

02/17/2022 Page 13 of 70 PAS File Formats

DRILL STEM TEST FILE
(DST)
~ TEST SUMMARY DATA
# {TEST SUMMARY DATA - Must be completed unless [MSRN] (Test Misrun Indicator) = (Y)es}

# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
GSERU. [CHAR 20] GAUGE SERIAL NUMBER USED IN Mandatory Serial number of Gauge/Recorder used for representative reservoir
SUMMARY pressure

SDGAL.M [NUMB 10,5] REPRESENTATIVE GAUGE DEPTH M Must be <= [TBASL] (Interval Base - Log) (LOG) Depth of Gauge/Recorder, representative of reservoir
(LOG)
SDGAT.M [NUMB 10,5] REPRESENTATIVE GAUGE DEPTH M Mandatory, if [PRPS] (Test Purpose Indicator) = (TVD) Depth of Gauge/Recorder, representative of reservoir
(TVD) (I)nitial, else Optional. If present and [WTYP]
(Well Type Indicator) = (D)eviated or (H)orizontal;
[SDGAT] (Representative Gauge Depth - TVD)
must be <= [SDGAL] (Representative Gauge
Depth - Log), else [SDGAT must = [SDGAL]

PRGA.KPAA [NUMB 8,2] PRESSURE AT GAUGE DEPTH KPAA Mandatory, if [MSRN] (Test Misrun Indicator) = Most representative shut-in pressure recorded at Gauge/Recorder
(N)o, otherwise can be Null Depth
PEXTR.KPAA [NUMB 8,2] REPRESENTATIVE EXTRAP/ FALSE Mandatory, if [PRPS] (Test Purpose) = (I)nitial
PRESSURE Pressure; Must match one entry of [PEXTR] from
[DTFG (n)] Table. Must be => than [PRGA]
(Gauge Pressure at End of Stage) but cannot
exceed [PRGA] by > 6%.

PRFFG.KPAA [NUMB 8,2] FINAL FLOWING PRESSURE AT GAUGE Mandatory, if [MSRN] (Test Misrun Indicator) = Final Measured Representative Flowing Gauge/Recorder Pressure
DEPTH KPAA (N)o kPaa
STGR.KPA/M [NUMB 5,3] REPRESENTATIVE PRESSURE GRADIENT Mandatory, if [PRPS] (Test Purpose Indicator) =
(I)nitial. Can not be zero. IF [MSRN] (Test Misrun
Indicator) = (Y)es, can be null.

02/17/2022 Page 14 of 70 PAS File Formats

DRILL STEM TEST FILE
(DST)
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
TRES.DEGC [NUMB 5,2] RESERVOIR TEMPERATURE Optional. If present, must be > zero
QGMX.E3M3/D [NUMB 13,4] MAXIMUM GAS FLOW RATE Mandatory, if [QGFF] (Final Gas Flow Rate) > Maximum Flowing Gas Rate during test, (103m3/d)
0.00. Can be zero.
QOMX.M3/D [NUMB 13,4] MAXIMUM OIL FLOW RATE Mandatory, if [QOFF] (Final Oil Flow Rate) > 0.00. Maximum Flowing Oil Rate during test, (m3/d)
Can be zero.
QWMX.M3/D [NUMB 13,4] MAXIMUM WATER FLOW RATE Mandatory, if [QWFF] (Final Water Flow Rate) > Maximum Flowing Water Rate during test, (m3/d)
0.00. Can be zero.
TFGS.MIN [NUMB 10,5] TIME FOR FINAL GAS FLOW TO SURFACE Mandatory, if [QGMX] (Maximum Gas Flow Rate) Length of time for gas to reach surface (minutes). Note:
> 0.0, else must be Null. Can be zero. "Immediate" Flow to Surface = 0 (zero) minutes.
TFOS.MIN [NUMB 10,5] TIME FOR FINAL OIL FLOW TO SURFACE Mandatory, if [QOMX] (Maximum Oil Flow Rate) > Length of time for oil to reach surface (minutes). Note: "Immediate"
0.0, else must be Null. Can be zero. Flow to Surface = 0 (zero) minutes.
TFWS.MIN [NUMB 10,5] TIME FOR FINAL WATER FLOW TO Mandatory, if [QWMX] (Maximum Water Flow Length of time for water to reach surface (minutes). Note:
SURFACE Rate) > 0.0, else must be Null. Can be zero. "Immediate" Flow to Surface = 0 (zero) minutes.
GENC. [CHAR 240] COMMENT - GENERAL Optional Free form comment. Note: IF PRPS = (I), GENC copied to AER
Pressure Summary database.

~ MUD AND CUSHION

# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
MUTP. [CHAR 12] MUD/DRILLING FLUID TYPE Identify fluid used to drill well
MUWT.KG/M3 [NUMB 9,4] MUD WEIGHT Must be > 300 and < 3000 The measurement of the drilling mud mass/volume
CUTP. [NUMB 1] CUSHION TYPE CODE Must = (0) None, (1) Water, (2) Oil, (3) Nitrogen, Cushion Fluid used during test.
(4) Diesel, or (5) Inhibitor & Water
CUGP.KPAA [NUMB 8,2] CUSHION GAS PRESSURE If CUTP (Cushion Type Code) = (3) then CUGP Surface Pressure Pumped In (kPaa)
(Cushion Gas Pressure) must be present.

CUIL.M [NUMB 10,5] INITIAL CUSHION LENGTH If CUTP (Cushion Type Code) <> (0) or (3) then The length of cushion present during test (m)
CUIL (Initial Cushion Length) must be present.
LCGR.KPA/M [NUMB 5,3] LIQUID CUSHION GRADIENT If CUTP (Cushion Type Code) <> (0) or (3), then Gradient of liquid portion of cushion (kPa/m)
LCGR (Liquid Cushion Gradient) must be present.

02/17/2022 Page 15 of 70 PAS File Formats

DRILL STEM TEST FILE
(DST)
~ RECOVERIES - DST
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
MTST. [CHAR 1] MULTIPLE TEST RECOVERY INDICATOR Must be either (Y)es or (N)o. If [MTST] (Multiple Flag indicating recovery from multiple tests
Test Recovery Indicator) = (Y)es, then >1 [RXXA]
(Recovery Amount) must be reported.

RPXX. [CHAR 1] RECOVERY VOLUME TYPE INDICATOR Must be (V)olume, (H)eight in Metres, or (N)one. If Flag indicating unit of measure for Recovered amounts
[MTST] (Multiple Test Recovery Indicator) = (Y)es,
then [RPXX] (recovery Volume Type Indicator) can
not = (N)one.

~ DATA TABLE – RECOVERIES

# {DTREC - DEFINITIONS AND DESCRIPTIONS IN ASSOCIATION WITH DTREC TABLE}
# {TABLE DTREC CAN BE OMITTED IF [RPXX] (Recovery Volume Type Indicator) = (N)one}
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
RXXA.M or M3 [NUMB 13,4] RECOVERY AMOUNT - (M or M3) [RXXA] must be reported in "m" Meters if [RPXX] Amount of recovery in volume or height as indicated above (see
(Recovery Volume Indicator) = (H)eight; [RXXA] RPXX). Specific Unit must be noted depending of type of
must be reported in "m3" Cubic Metres if [RPXX] Recovery Amount (i.e. if "meters" are to be reported, then
(Recovery Volume Indicator) = (V)olume. If Mnemonic must equal [RXXA.M]. However if "cubic meters" are to
[RPXX] = (H)eight, then the total of the first 6 be reported, then Mnemonic must = [RXXA.M3].
recoveries (amount in meters) can not be >
[TTOPL] (Interval Top -Log) by more than 10
meters.

RXXC. [NUMB 3] RECOVERY TYPE CODE [RXXC] (Recovery Fluid Type Code) must be valid Recovery Type Code
AER Code (see footnote)
RXXD. [CHAR 30] RECOVERIES DESCRIPTION Description must be provided if [RPXX] (Recovery Description of Recoveries
Volume Indicator) = (V)olume or (H)eight

~ DTREC

RXXA RXXC RXXD

999999999.9999 999 X(30)
999999999.9999 999 X(30)
999999999.9999 999 X(30)

02/17/2022 Page 16 of 70 PAS File Formats

DRILL STEM TEST FILE
(DST)
~ HEADER DATA – GAUGE (n)
# {[GSERU] (Gauge Serial Number Used in Summary) must match one of the reported [GSER] (Gauge Serial Number) (i.e. Representative Gauges)}
# {WHILE THOUGH, even if [MSRN] (Test Misrun Indicator) = (Y)es, this section is mandatory}
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
MSRNG. [CHAR 1] GAUGE MISRUN INDICATOR Must be (Y)es or (N)o. Match; [GSERU] (Gauge Flag indicating Gauge/Recorder Misrun (not entire test)
Serial Number used in Summary) = [GSER]
(Gauge Serial Number) and if [MSRN] (Test
Misrun Indicator) = (N)o, then [MSRNG] must =
'(N)o

GSER. [CHAR 20] GAUGE SERIAL NUMBER One Gauge must match [GSERU] (Gauge Serial Serial or Reference number of Gauge/Recorder.
Number used in Summary) Note: Number required for the ability to audit gauge data.
GTYP. [CHAR 30] GAUGE TYPE Type of gauge used (mechanical or electronic, model)
GMAN. [CHAR 60] GAUGE MANUFACTURER Name of manufacturer of Gauge/Recorder
GRNG.KPAA [NUMB 8,2] MAXIMUM RECORDER RANGE Full scale pressure range of Gauge/Recorder (kPaa)
GCAL.DAY [YYYY MM DD] DATE OF LAST CALIBRATION Must be < = [FTDT] (Final Test Date/Time) Date source Gauge/Recorder last calibrated
GRES. [NUMB 6,5] RESOLUTION % OF FULL-SCALE Published Resolution of Gauge/Recorder (Percentage)
GACC. [NUMB 6,5] ACCURACY % OF FULL-SCALE Published accuracy of Gauge/Recorder (Percentage)
SDGL.M [NUMB 10,5] GAUGE RUN DEPTH M KB (LOG) Gauge/Recorder depth (Measured Depth/LOG) in mKB
SDGT.M [NUMB 10,5] GAUGE RUN DEPTH M KB (TVD) Mandatory, if [WTYP] (Well Type) = (D)eviated or Gauge/Recorder depth (Calculated Depth/TVD) in mKB
(H)orizontal
GPOS. [CHAR 1] GAUGE POSITION INDICTOR [GPOS] (Gauge Position Indicator) must be Flag indicating position of Gauge/Recorder - (I)nside, (O)utside,
(I)nside, (O)utside, (R)ecovery, (B)elow Straddle, Fluid/(R)ecovery, (B)elow Straddle, I(N)flate, of (U)nknown/Other
I(N)flate, or (U)nknown/Other. IF [GSERU] =
[GSER] [GPOS] can not be = (U)nknown/Other

02/17/2022 Page 17 of 70 PAS File Formats

DRILL STEM TEST FILE
(DST)
~ DATA TABLE - FLOWING SUMMARY - GAUGE (n)
# (DTFG (n) - DEFINITIONS AND DESCRIPTIONS IN ASSOCIATION WITH DTFG (n) TABLES)
# If [PRPS] (Test Purpose Indicator) = (I)nitial, THEN
# Only recorder where [GSER] (Gauge Serial Number) matching [GSERU] Gauge Serial Number Used in Summary) requires at least one occurrence of [PEXTR] (Representative Extrap/False Pressure).
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
TIME.DAY/HR/SS [YYYY MM DD HHHH:SS] REAL TIME If [MSRN] (Test Misrun Indicator) = (Y)es can be 24 Hour Clock.
null; If present must be >= Spud Date and <=
Abandoned Date and <= Submission Date

STGE. [CHAR 2] STAGE NUMBER If [MSRN] (Test Misrun Indicator) = (Y)es, can be Test stage number
null
FSTGC. [CHAR 22] STAGE DESCRIPTION If [MSRN] (Test Misrun Indicator) = (Y)es, can be (i.e. Initial Hydrostatic, Start of 1st Flow)
null
PRGA.KPAA [NUMB 8,2] GAUGE PRESSURE AT END OF STAGE Mandatory, if [MSRN] (Test Misrun Indicator) = Primary Gauge/Recorder pressure
(N)o, else can be null
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
TSTD.MIN [NUMB 10,5] STAGE DURATION MINUTES If [MSRN] (Test Misrun Indicator) = (Y)es, can be Duration of stage
null. One occurrence per table must be > 0.0
PEXTR.KPAA [NUMB 8,2] REPRESENTATIVE EXTRAP/ FALSE Mandatory, if [PRPS] (Test Purpose) = (I)nitial, at
PRESSURE least one occurrence of [PEXTR] must be present
in table. Must be >= [PRGA] (Gauge Pressure at
End of Same Stage) but cannot exceed [PRGA] by
> 6%.

QGFF.E3M3/D [NUMB 13,4] FINAL GAS FLOW RATE Mandatory if [MSRN] (Test Misrun Indicator) = Flow Rate of Gas, at end of stage (103m3/d).
(N)o, and at least one occurrence per table, can
be zero. Else can be Null.

QOFF.M3/D [NUMB 13,4] FINAL OIL FLOW RATE Mandatory if [MSRN] (Test Misrun Indicator) = Flow Rate of Oil, at end of stage (m3/d).
(N)o, and at least one occurrence per table, can
be zero. Else can be Null.

QWFF.M3/D [NUMB 13,4] FINAL WATER FLOW RATE Mandatory if [MSRN] (Test Misrun Indicator) = Flow Rate of Water, at end of stage (m3/d).
(N)o, and at least one occurrence per table, can
be zero. Else can be Null.

~ DTFG (n)
# {IF [MSRN] = (N)o and [PRPS] (Purpose Indicator) = (O)ther, then there must be a minimum of 5 lines of data in the [DTFG (n)] table}
# {IF [MSRN] = (N)o and [PRPS] (Purpose Indicator) = (I)nitial, then there must be a minimum of 8 lines of data in the [DTFG (n)] table; and a minimum 1 occurrence of [PEXTR] must exist}

TIME STGE FSTGC PRGA TSTD

YYYY MM DD HHHH:SS XX X(22) 999999.99 99999.99999
YYYY MM DD HHHH:SS XX X(22) 999999.99 99999.99999

02/17/2022 Page 18 of 70 PAS File Formats

DRILL STEM TEST FILE
(DST)
YYYY MM DD HHHH:SS XX X(22) 999999.99 99999.99999

...DTFG (n) - TABLE CONTINUED

PEXTR QGFF QOFF QWFF

999999.99 999999999.9999 999999999.9999 999999999.9999
999999.99 999999999.9999 999999999.9999 999999999.9999
999999.99 999999999.9999 999999999.9999 999999999.9999

02/17/2022 Page 19 of 70 PAS File Formats

DRILL STEM TEST FILE
(DST)

~ DATA TABLE - GAUGE (n)

# (DTG (n), DEFINITIONS AND DESCRIPTIONS IN ASSOCIATION WITH DTG (n) TABLES)
# {TABLE DTG (n) CAN BE OMITTED IF SUBSEQUENT/SECONDARY GAUGES MISRUN}
# {If [MSRN] (Test Misrun Indicator) = (N)o, then 1 TABLE (at least 1 line of data) MUST BE PRESENT}
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
TIME.DAY/HR/SS [YYYY MM DD HHHH:SS] REAL TIME If [MSRN] (Test Misrun Indicator) = (N)o, then 24 Hour Clock
must be >= Spud Date and <= Abandoned Date
and <= Submission Date

PRGA.KPAA [NUMB 8,2] GAUGE PRESSURE KPAA Pressure measured at that interval in time via source
Gauge/Recorder
TGA.DEGC [NUMB 5,2] GAUGE TEMPERATURE Temperature measured at that interval in time via source
Gauge/Recorder (DegC)
GCOM. [CHAR 240] GENERAL COMMENT Optional Free form comment

~ DTG (n)

TIME PRGA TGA GCOM

YYYY MM DD HHHH:SS 99999.99 999.99 X(240)
YYYY MM DD HHHH:SS 99999.99 999.99 X(240)
YYYY MM DD HHHH:SS 99999.99 999.99 X(240)

02/17/2022 Page 20 of 70 PAS File Formats

DRILL STEM TEST FILE
(DST)

~ DATA TABLE - CLOSED CHAMBER

# (DTCC - DEFINITIONS AND DESCRIPTIONS IN ASSOCIATION WITH DTCC TABLE)
# {TABLE DTCC CAN BE OMITTED IF CLOSED CHAMBER ([TTYP] (Test Type Indicator) <> (08) or (18)}
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
TIME.DAY/HR/SS [YYYY MM DD HHHH:SS] REAL TIME If [TTYP] (Test Type Indicator) = (08) or (18), then 24 Hour clock
must be >= Spud Date and <= Abandoned Date
and <= Submission Date

SDPT.KPAA/MIN [NUMB 8,2] SURFACE DP/DT KPAA/MIN Mandatory, if [TTYP] (Test Type Indicator) = (08) Change in Surface pressure/time
or (18). Can be zero and can be negative.
PSUR.KPAA [NUMB 8,2] SURFACE PRESSURE Mandatory, if [TTYP] (Test Type Indicator) = (08) Surface pressure (kPaa)
or (18). Can not be zero
RDPT.KPAA/MIN [NUMB 8,2] RECOVERY DP/DT KPAA/MIN Optional, if provided can be zero. Change in recovery pressure/time
PRCV.KPAA [NUMB 8,2] RECOVERY PRESSURE Optional, if provided can not be zero. Recovery pressure (kPaa)

QCCLIQ.M3/D [NUMB 13,4] CALC LIQUID RATE Mandatory, if [TTYP] (Test Type Indicator) = (08) m3/d
or (18), and Can be zero

QCCGAS.E3M3/D [NUMB 13,4] CALC GAS RATE Mandatory, if [TTYP] (Test Type Indicator) = (08) 103m3/d
or (18), and Can be zero

~ DTCC

TIME SDPT PSUR RDPT PRCV

YYYYMMDDHHHHSS 999999.99 999999.99 999999.99 999999.99
YYYYMMDDHHHHSS 999999.99 999999.99 999999.99 999999.99
YYYYMMDDHHHHSS 999999.99 999999.99 999999.99 999999.99

#… DTCC - TABLE CONTINUED

QCCLIQ QCCGAS
999999999.9999 999999999.9999
999999999.9999 999999999.9999
999999999.9999 999999999.9999

02/17/2022 Page 21 of 70 PAS File Formats

DRILL STEM TEST FILE
(DST)
Recovery Type Codes (RXXC):…

01 Gas 50 Oil 100 Mud

11 Condensate 51 Gas cut Oil 101 Gas/Condensate cut Mud
12 Mud cut Condensate 52 Mud cut Oil, or 102 Oil cut Mud
13 Water cut Condensate 52 Mud & Gas cut Oil 103 Gas & Oil cut Mud
14 Salt Water cut Condensate 53 Water cut Oil 104 Water cut Mud
15 Brackish Water cut Condensate 54 Salt Water cut Oil 105 Fresh Water cut Mud
16 Sulphurous Brackish Water cut Condensate 55 Brackish Water cut Oil 106 Brackish Water cut Mud
17 Sulphurous Salt Water cut Condensate 56 Sulphurous Brackish Water cut Oil 107 Salt Water cut Mud
18 Mud & Water cut Condensate 57 Sulphurous Salt Water cut Oil 108 Sulphurous Brackish Water cut Mud
19 Mud & Salt Water cut Condensate 58 Mud & H2O cut Oil 109 Sulphurous Salt Water cut Mud
20 Mud & Brackish Water cut Condensate 59 Mud & Salt H2O cut Oil 110 Gas & Oil & Water cut Mud
21 Mud & Sulphurous Salt Water cut Condensate 60 Mud & Brackish H2O cut Oil 111 Gas & Water cut Mud
22 Mud & Sulphurous Brackish H2O cut Condensate 61 Mud & Sulphurous Brackish H2O cut Oil 112 Oil & Water cut Mud
62 Mud & Sulphurous Salt H2O cut Oil

150 Water 152 Brackish Water 153 Salt Water

151 Fresh Water 201 Gas cut Brackish Water 202 Gas cut Salt Water
157 Cloudy Water 251 Oil cut Brackish Water 252 Oil cut Salt Water
200 Gas cut Water 301 Oil & Gas cut Brackish Water 302 Oil & Gas cut Salt Water
250 Oil cut Water 352 Mud cut Brackish Water 353 Mud cut Salt Water
300 Oil & Gas cut Water 401 Mud & Gas cut Brackish Water 402 Mud & Gas cut Salt Water
350 Mud cut Water 451 Mud & Oil cut Brackish Water 452 Mud & Oil cut Salt Water
351 Mud cut Fresh Water 501 Mud & Oil & Gas cut Brackish Water 502 Mud & Oil & Gas cut Salt Water
400 Mud & Gas cut Water
450 Mud & Oil / Water
500 Mud & Oil & Gas / Water 155 Sulphurous Brackish Water 156 Sulphurous Salt Water
204 Gas cut Sulphurous Brackish H2O 205 Gas cut Sulphurous Salt Water
154 Sulphurous Water 254 Oil cut Sulphurous Brackish H2O 255 Oil cut Sulphurous Salt Water
203 Gas cut Sulphurous Water 304 Oil & Gas cut Sulphurous Brackish H2O 305 Oil & Gas cut Sulphurous Salt Water
253 Oil cut Sulphurous Water 355 Mud cut Sulphurous Brackish H2O 356 Mud cut Sulphurous Salt Water
303 Oil & Gas cut Sulphurous Water 404 Mud & Gas cut Sulphurous Brackish H2O 405 Mud & Gas cut Sulphurous Salt Water
354 Mud cut Sulphurous Water 454 Mud & Oil cut Sulphurous Brackish H2O 455 Mud & Oil cut Sulphurous Salt Water
403 Mud & Gas cut Sulphurous Water 504 Mud & Oil & Gas cut Sulphurous Brackish H2O 505 Mud & Oil & Gas cut Sulphurous Salt Water
453 Mud & Oil cut Sulphurous Water
503 Mud & Oil & Gas cut Sulphurous Water 995 Dry Pipe 998 Load/Drilling Fluid (only)
996 Cushion 999 Not Known
997 Sand

02/17/2022 Page 22 of 70 PAS File Formats

DRILL STEM TEST FILE
(DST)

DST Test Type Codes (TTYP)

07 DST - Bottomhole
08 DST- Bottomhole & Closed Chamber
17 DST- Straddle
18 DST - Straddle & Closed Chamber
46 RFT (Repeat Formation Tester) <--------------- Currently
47 MDT (Modular Dynamic Tester) <--------------- Omitting
48 WFT (Wireline Formation Tester) <--------------- these
49 FRT (Flow Rate Tester) <--------------- Test Types

GENERAL EDITS
ALL Mnemonic Values are Mandatory, unless otherwise noted.
"Conditional" Values will be noted as, (i.e. Mandatory, if TTYP = 08 or 18)
Zero's are NOT acceptable unless otherwise noted.
# WHERE SECTION RULES EXIST (Noted by the # Sign) THEY ARE SUPERSEDED BY INDIVIDUAL BUSINESS RULES AND EDITS
ALL DEPTHS (for DST) are measured or calculated and reported in reference to (KB) Kelly Bushing Elevation
ALL DATES must be >= Spud Date and <= Abandoned Date and <= Submission Date
All Depths must be less than 7,000.00 M
All Pressures must be less than 150,000.00 kPa
All Temperatures (unless otherwise noted) must be between -100 and 1,000°C
All Times must be less than 100,000.0 Hours
All gas production rates must be less than 100,000.00 E3M3/day
All oil and water rates must be less than 100,000.00 M3/day
IF [FLEXP] = (01) Oil, then [STGR] should be > 1.500 and <= 9.974 kPa/m
IF [FLEXP] = (02) Gas, then [STGR] should be > 0.001 <= 5.999 kPa/m
IF [FLEXP] = (06) Water or (17) Crude Bitumen, then [STGR] should be >= 9.975 and < 16.000 kPa/m

02/17/2022 Page 23 of 70 PAS File Formats

PRODUCTION (FIELD NOTES) TEST FILE
(PRD)
~ FILE VERIFICATION
# (Information in this section is Assigned by the AER, and Appended to the PAS file upon Acceptance / Validation via WTC-Submit procedure)

~ VERSION
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
PASTYPE. [CHAR 7] DIGITAL DATA - PRODUCTION TEST DATA PAS-PRD Field Production Notes - test information, format

UNIT. [CHAR 1] UNITS FLAG (M)etric Metric Units for AER submission
VERS. [NUMB 5,2] AER DIGITAL WELL TEST DATA 4.00 Current AER version for ASCII test data submission

~ TEST DATA
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
SERCO. [CHAR 5] SERVICE COMPANY CODE Company conducting test (see AER Website)
RRUN. [CHAR 1] RECORDERS RUN must be (Y)es or (N)o Flag indicating Pressure Gauges ran during operations
TTOPL.M [NUMB 6,2] TEST/PROD. INTERVAL TOP M KB (LOG) [TTOPL] (Interval Top - Log) must be > 0.0 and < Top of tested or producing interval - in log depth, measured mKB
[TBASL] (Interval Base - Log)
TBASL.M [NUMB 6,2] TEST/PROD. INTERVAL BASE M KB (LOG) [TBASL] (Interval Base - Log) must be > 0.0 and Base of tested or producing interval - in log depth, measured mKB
=> [TTOPL] (Interval Top - Log) and cannot be
greater than Total Well Depth.

FTDT.DAY/HR [YYYY MM DD HHHH] TEST FINAL DATE/TIME Must be >= Spud Date and <= Abandoned Date Date/time of last measured flowrate
and <= Submission Date
FLGAS.E3M3 [NUMB 13,4] GAS FLARED E3M3 Mandatory, must be >= 0.0 (103m3) Over duration of reported production in DTSUM Table
INGAS.E3M3 [NUMB 13,4] GAS INCINERATED E3M3 Mandatory, must be >= 0.0 (103m3) Over duration of reported production in DTSUM Table
PLGAS.E3M3 [NUMB 13,4] GAS PRODUCED TO PIPELINE E3M3 Mandatory, must be >= 0.0 (103m3) Over duration of reported production in DTSUM Table
VNGAS.E2M3 [NUMB 13,4] GAS VENTED E3M3 Mandatory, must be >= 0.0 (103m3) Over duration of reported production in DTSUM Table

02/17/2022 Page 24 of 70 PAS File Formats

PRODUCTION (FIELD NOTES) TEST FILE
(PRD)

~ METER GAS (n)

# {METER GAS SECTION and TABLE DTGAS (n) CAN BE OMITTED IF NO GAS PRODUCED (VTGAS = “0.0”)
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
MDTYPE. [CHAR 1] METERING DEVICE TYPE INDICATOR Must = (P)rover, (O)rifice, (T)urbine, P(i)tiot Tube, Flag - (P)rover, (O)rifice, (T)urbine, P(i)tiot Tube, (C)hoke, (V)-Cone
(C)hoke, (V)-Cone, or Ot(H)er or Ot(H)er
RDGAS. [NUMB 4,3] GAS RELATIVE DENSITY
N2.FRAC [NUMB 5,4] NITROGEN Can be zero. Can not be Null Mole fraction, air free as received
CO2.FRAC [NUMB 5,4] CARBON DIOXIDE Can be zero. Can not be Null Mole fraction, air free as received
H2S.FRAC [NUMB 7,6] HYDROGEN SULPHIDE for METERING Can be zero. Can not be Null Mole fraction, air free as received
DEVICE CALC
PATM.KPA [NUMB 8,2] ATMOSPHERIC PRESSURE Must be > 85 and < 105
TAP. [CHAR 1] TAP TYPE INDICATOR If [MDTYPE] (Metering Device Type Indicator) = Flag indicating taps (F)langed or (P)ipe
(O)rifice, then must indicate (F)langed or (P)ipe.

TAPL. [CHAR 1] TAP LOCATION INDICATOR If [MDTYPE] (Metering Device Type Indicator) = Flag indicating location of taps (U)p Stream or (D)own stream
(O)rifice, then must indicate (U)p Stream or
(D)own Stream.

RSIZ.MM [NUMB 8,3] METER RUN / PROVER SIZE Mandatory, must be => 0.0 if [MDTYPE] (Metering Inside diameter of Meter Run / Prover
Device Type Indicator) = (P)rover, (O)rifice,
P(i)tiot, or (V)-Cone

TCON.PULSES/M3 [NUMB 10,5] TURBINE DEVICE CONSTANT Mandatory, if [MDTYPE] (Metering Device Type
Indicator) = (T)urbine.
ICON. [NUMB 10,5] PITIOT TUBE DEVICE CONSTANT Mandatory, if [MDTYPE] (Metering Device Type
Indicator) = P(i)tiot
BETA. [NUMB 10,7] V-CONE BETA RATIO Mandatory, if [MDTYPE] (Metering Device Type V-Cone beta ratio
Indicator) = (V), else can be Null. Can be zero.

MCOF. [NUMB 10,7] V-CONE METER COEFFICIENT Mandatory, if [MDTYPE] (Metering Device Type V-Cone Meter coefficient
Indicator) = (V), else can be Null. Can be zero.

MCOMG. [CHAR 240] COMMENT - GAS METER Provides additional information about the meter being used

02/17/2022 Page 25 of 70 PAS File Formats

PRODUCTION (FIELD NOTES) TEST FILE
(PRD)
~ DATA TABLE GAS (n)
# (DTGAS (n) - DEFINITIONS AND DESCRIPTIONS IN ASSOCIATION WITH DTGAS TABLES)
# {TABLE DTGAS (n) CAN BE OMITTED IF NO GAS PRODUCED ([VTGAS] (Cumulative Total Gas Volume All meters) = “0.0”)}
# {Each attribute is mandatory, and except for [TIME] must occur at least once in the table.}
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
TIME.DAY/HR/SS [YYYY MM DD HHHH:SS] REAL TIME Must be >= Spud Date and <= Abandoned Date 24 Hour clock. Must correspond to [FTDT] (Test Final Date/Time)
and <= Submission Date
QGAS.E3M3/D [NUMB 13,4] GAS RATE At least one value > = 0.00 must appear in table. Gas rate reading
H2S.FRAC [NUMB 7,6] HYDROGEN SULPHIDE MOLE FRACTION Optional

PLATE.MM [NUMB 8,3] ORIFICE /CHOKE PLATE SIZE Mandatory, if [MDTYPE] (Metering Device Type
Indicator) = (C)hoke or (O)rifice, else null. Can be
zero

STAG.KPAA [NUMB 8,2] METER PRESSURE (GAS) Pressure used for Super Compressibility Calculation
DIFG.KPA [NUMB 8,2] PRESSURE DIFFERENTIAL (GAS) Mandatory, if [MDTYPE] (Metering Device Type (kPa)
Indicator) = (C)hoke, (O)rifice, P(i)tiot, or (V)-Cone,
else can be zero or NULL

TMPG.DEGC [NUMB 5,2] METER TEMPERATURE Temperature used for Super Compressibility Calculation
TRBG.PULSE [NUMB 8,3 14,3] TURBINE METER READING Mandatory, if [MDTYPE] (Metering Device Type
Indicator) = (T)urbine, else must be Null.
N2.FRAC [NUMB 5,4] NITROGEN MOLE FRACTION Optional
CO2.FRAC [NUMB 5,4] CARBON DIOXIDE MOLE FRACTION Optional
RCOMP. [CHAR 240] GAS COMPOSITION COMMENT Optional Gas composition as measured throughout the test

02/17/2022 Page 26 of 70 PAS File Formats

PRODUCTION (FIELD NOTES) TEST FILE
(PRD)

~ DTGAS (n)
TIME QGAS H2S PLATE STAG
YYYY MM DD HHHH:SS 999999999.9999 9.9999 99999.999 999999.99
YYYY MM DD HHHH:SS 999999999.9999 9.9999 99999.999 999999.99
YYYY MM DD HHHH:SS 999999999.9999 9.9999 99999.999 999999.99

# DTGAS (n) … - TABLE CONTINUED

DIFG TMPG TRBG N2 C02
999999.99 999.99 99999999999.999 9.9999 9.9999
999999.99 999.99 99999999999.999 9.9999 9.9999
999999.99 999.99 99999999999.999 9.9999 9.9999

# DTGAS (n) … - TABLE CONTINUED

RCOMP
X(240)
X(240)
X(240)

~ METER LIQUID (n)

# {Must Repeat Table for second fluid measured}
# {METER LIQUID SECTION and TABLE DTLIQ (n), MUST BE NULL or CAN BE OMITTED IF NO FLUID PRODUCED: (If All Values for VTOIL and VTCON and VTWTR = 0.00)}
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
LIQT. [CHAR 1] LIQUID TYPE INDICATOR Must be (O)il or (C)ondensate or (W)ater Flag indicating (O)il, (W)ater, (C)ondensate
LQMTYP. [CHAR 1] METERING DEVICE TYPE INDICATOR Must be (T)urbine, (L)evel, (V)olume, (O)ther Flag - (T)urbine, (L)evel, (V)olume, (O)ther

TCON.PULSE/M3 [NUMB 10,5] TURBINE DEVICE K-FACTOR Mandatory, if [LQMTYP] (Metering Device Type Manufacturer specific K-Factor
Indicator) = (T)urbine, then must provide K-Factor

TMEA. [CHAR 1] TANK MEASUREMENT INDICATOR Mandatory, if [LQMTYP] (Metering Device Type Flag indicating (I)ncremental or (C)umulative measurement
Indicator) = (L)evel or (V)olume, then must indicate
if measurement is (I)ncremental or (C)umulative
else can be Null

TEQU. [CHAR 240] TANK EQUATION Mandatory, if [LQMTYP] (Metering Device Type Equation illustration
Indicator) = (L)evel, must provide tank
measurement and volume equation.

MCOML. [CHAR 240] COMMENT - LIQUID METER Provides additional information about the meter being used

02/17/2022 Page 27 of 70 PAS File Formats

PRODUCTION (FIELD NOTES) TEST FILE
(PRD)
~ DATA TABLE LIQUID (n)
# (DTLIQ (n) - DEFINITIONS AND DESCRIPTIONS IN ASSOCIATION WITH DTLIQ TABLES)
# {TABLE DTLIQ (n) MUST BE NULL or OMITTED IF NO FLUID PRODUCED: (If All Values for [VTOIL] and [VTCON] and [VTWTR] = 0.00)}
# {Each attribute is mandatory, and except for [TIME] must occur at least once in the table.}
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
TIME.DAY/HR/SS [YYYY MM DD HHHH:SS] REAL TIME Must be >= Spud Date and <= Abandoned Date 24 Hour clock. Must correspond to [FTDT] (Test Final Date/Time)
and <= Submission Date
GNLF.MM [NUMB 8,3] TANK GAIN LEVEL Mandatory, if [LQMTYP] (Metering Device Type
Indicator) = (L)evel, and at least one value > =
0.00 must appear in table.

GNVF.M3 [NUMB 8,3] TANK GAIN VOLUME Mandatory, if [LQMTYP] (Metering Device Type
Indicator) = (L)evel or (V)olume, and at least one
value > = 0.00 must appear in table.

TRBF.PULSE [NUMB 14,3 ] TURBINE METER READING Mandatory, if [LQMTYP] (Metering Device Type
Indicator) = (T)urbine
API. [NUMB 4,2] API GRAVITY @ 15 DegC Optional. If present, can not be zero. Measured Gravity of Produced Oil, Degrees API
BSW.FRAC [NUMB 4,3] FRACTION OF TOTAL BS&W Mandatory, if [LIQT] (Liquid Type Indicator) = (O)iI, Basic sand and water volume fraction, total
and at least one value > = 0.00 must appear in
table.

SALT.PPM [NUMB 8,0] SALINITY PPM Optional. If present, can be zero. Salinity of produced fluid (PPM)
PH. [NUMB 3,1] PH Optional. If present must be >0 and < 14. pH concentration of produced fluid
OILRATE.M3/D [NUMB 13,4] OIL RATE Mandatory, if Meter Liquid (n) [LIQT] (Liquid Type Produced oil only, not load or frac oil
Indicator) = (O)il and at least one value >0.00 must
appear in table.

CONRATE.M3/D [NUMB 13,4] CONDENSATE RATE Mandatory, if, Meter Liquid (n) [LIQT] (Liquid Type
Indicator) = (C)ondensate and at least one value
>0.00 must appear in table.

WTRRATE.M3/D [NUMB 13,4] WATER RATE Mandatory, if, Meter Liquid (n) [LIQT] (Liquid Type
Indicator) = (W)ater and at least one value >0.00
must appear in table.

QLIQ.M3/D [NUMB 13,4] MEASURED TOTAL LIQUID RATE Must = [OILRATE] (Oil Rate) + [CONRATE] Total Combined Liquid Rate
(Condensate Rate) + [WTRRATE] (Water Rate)

02/17/2022 Page 28 of 70 PAS File Formats

PRODUCTION (FIELD NOTES) TEST FILE
(PRD)
~ DTLIQ (n)

TIME GNLF GNVF TRBF API

YYYY MM DD HHHH:SS 99999.999 100000 99999999999.999 99.99
YYYY MM DD HHHH:SS 99999.999 100000 99999999999.999 99.99
YYYY MM DD HHHH:SS 99999.999 100000 99999999999.999 99.99

#…DTLIQ (n) - TABLE CONTINUED

BSW SALT PH OILRATE CONRATE
9.999 99999999 99.9 999999999.9999 999999999.9999
9.999 99999999 99.9 999999999.9999 999999999.9999
9.999 99999999 99.9 999999999.9999 999999999.9999

#…DTLIQ (n) - TABLE CONTINUED

WTRRATE QLIQ
999999999.9999 999999999.9999
999999999.9999 999999999.9999
999999999.9999 999999999.9999

02/17/2022 Page 29 of 70 PAS File Formats

PRODUCTION (FIELD NOTES) TEST FILE
(PRD)
~ DATA TABLE SUMMARY
# (DTSUM - DEFINITIONS AND DESCRIPTIONS IN ASSOCIATION WITH DTSUM TABLE)
# {Unless otherwise noted - each attribute is mandatory and is to occur at least one row within the table.}
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
TIME.DAY/HR/SS [YYYY MM DD HHHH:SS] REAL TIME Must be >= Spud Date and <= Abandoned Date 24 Hour clock. Must correspond to [FTDT] (Test Final Date/Time)
and <= Submission Date
TWH.DEGC [NUMB 5,2] WELLHEAD TEMPERATURE Optional, can be zero Temperature measured at wellhead (DegC)
TUPS.KPAA [NUMB 8,2] TUBING PRESSURE Mandatory, if [CSPS] (Casing Pressure) is null. (kPaa)
Can be zero.
TTUB.DEGC [NUMB 5,2] TUBING TEMPERATURE Optional, can be zero (DegC)
CSPS.KPAA [NUMB 8,2] CASING PRESSURE Mandatory, if [TUPS] (Tubing Pressure) is null. (kPaa)
Can be zero.
TCAS.DEGC [NUMB 5,2] CASING TEMPERATURE Optional, can be zero (DegC)
QTGAS.E3M3/D [NUMB 13,4] TOTAL GAS RATE ALL METERS Mandatory, if [VTGAS] = (Total Gas Volume
Produced) >0.00
QTOIL.M3/D [NUMB 13,4] TOTAL OIL RATE ALL METERS Mandatory, if [VTOIL] = (Total Oil Volume Produced oil only, not load or frac oil
Produced) >0.00
QTCON.M3/D [NUMB 13,4] TOTAL CONDENSATE RATE ALL METERS Mandatory, if [VTCON] = (Total Condensate
Volume Produced) >0.00
QTWTR.M3/D [NUMB 13,4] TOTAL WATER RATE ALL METERS Mandatory, if [VTWTR] = (Total Water Volume
Produced) >0.00
VTGAS.E3M3 [NUMB 13,4] CUMULATIVE TOTAL GAS VOLUME ALL [VTGAS] (last line DTSUM ) must equal Total of Cumulative volume produced during test. All Methods, Flared,
METERS [FLGAS] + [INGAS] + [PLGAS] + [VNGAS]. Can Incinerated, Vented or Inline/(Pipelined)
be zero.

VTOIL.M3 [NUMB 13,4] CUMULATIVE TOTAL OIL VOLUME ALL Can be zero. Cumulative volume produced during test. Produced oil only, not
METERS load or frac oil
VTCON.M3 [NUMB 13,4] CUMULATIVE TOTAL CONDENSATE Can be zero. Cumulative volume produced during test
VOLUME ALL METERS
VTWTR.M3 [NUMB 13,4] CUMULATIVE TOTAL WATER VOLUME Can be zero. Cumulative volume produced during test
ALL METERS
COMM. [CHAR 240] COMMENT General Test Comments (i.e. Text Descriptions regarding specific
operations)

02/17/2022 Page 30 of 70 PAS File Formats

PRODUCTION (FIELD NOTES) TEST FILE
(PRD)
~ DTSUM
TIME TWH TTUB TUPS CSPS
YYYY MM DD HHHH:SS 999.99 999.99 999999.99 999999.99
YYYY MM DD HHHH:SS 999.99 999.99 999999.99 999999.99
YYYY MM DD HHHH:SS 999.99 999.99 999999.99 999999.99

#… DTSUM - TABLE CONTINUED…

TCAS QTGAS QTOIL QTCON QTWTR
999.99 999999999.9999 999999999.9999 999999999.9999 999999999.9999
999.99 999999999.9999 999999999.9999 999999999.9999 999999999.9999
999.99 999999999.9999 999999999.9999 999999999.9999 999999999.9999

#… DTSUM - TABLE CONTINUED

VTGAS VTOIL VTCON VTWTR COMM
999999999.9999 999999999.9999 999999999.9999 999999999.9999 X (240)
999999999.9999 999999999.9999 999999999.9999 999999999.9999 X (240)
999999999.9999 999999999.9999 999999999.9999 999999999.9999 X (240)

GENERAL EDITS

ALL Mnemonic Values are Mandatory, unless otherwise noted.

02/17/2022 Page 31 of 70 PAS File Formats

GAS ANALYSIS FILE
(GAN)
~ FILE VERIFICATION
# (Information in this section is Assigned by the AER, and Appended to the PAS file upon Acceptance / Validation via WTC-Submit procedure)

~ VERSION
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
PASTYPE. [CHAR 7] DIGITAL DATA - GAS/GAS LIQUIDS PAS-GAN Gas Analysis test, format
ANALYSIS
UNIT. [CHAR 1] UNITS FLAG (M)etric Metric Units for AER submission
VERS. [NUMB 5,2] AER DIGITAL WELL TEST DATA 4.00 Current AER version for ASCII test data submission

~ TEST DATA
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
LABCO. [CHAR 60] LABORATORY NAME Company name conducting analysis
TTOPL.M [NUMB 6,2] TEST/PROD. INTERVAL TOP M KB (LOG) [TTOPL] (Interval Top - Log) must be > 0.0 and < Top of tested or producing interval - in log depth, measured mKB
[TBASL] (Interval Base - Log)
TBASL.M [NUMB 6,2] TEST/PROD. INTERVAL BASE M KB (LOG) [TBASL] (Interval Base - Log) must be > 0.0 and Base of tested or producing interval - in log depth, measured mKB
=> [TTOPL] (Interval Top - Log) and cannot be
greater than Total Well Depth.

HYDLP. [CHAR 1] HYDROCARBON LIQUIDS PRODUCTION Must be = (Y)es or (N)o. If [HYDLP] (Hydrocarbon Flag indicating measurable liquid production (Y)es or (N)o
Liquid Production) = (Y)es, then [DTCL] (Data
Table - Condensate / Liquid Analysis) can not be
null.

02/17/2022 Page 32 of 70 PAS File Formats

GAS ANALYSIS FILE
(GAN)
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
STYP. [CHAR 1] SAMPLE TYPE Must be a (G)as, (C)ondensate, (B)oth, or Type of Sample reported.
(R)ecombination
GLR.M3/M3 [NUMB 7,0] GAS LIQUID RATIO Mandatory, if [STYP] (Sample Type) = Calculated ratio, of separator gas and separator liquid at the time of
(R)ecombination sampling.
DSTLOC. [CHAR 1] DST SAMPLE LOCATION If [FS-SPNT] (First Stage - Sample Gathering
Point Code) = (50) then [DSTLOC] DST Sample
Location) must be (T)op, (M)iddle, or (B)ottom

GANC. [CHAR 240] COMMENT ON SAMPLE Optional General Free form Comment (regarding Sample or Analytical
Procedures).

# FIRST STAGE SEPARATOR - GAS ANALYSIS

~ HEADER DATA - FIRST STAGE SEPARATOR GAS ANALYSIS

# If [STYP] (SAMPLE TYPE) = (C)ondensate, then First Stage Separator must be blank.
FS-SDAT.DAY [YYYY MM DD] DATE SAMPLED Must be >= Spud Date and <= Abandoned Date Date First Stage Separator sample was gathered
and <= Submission Date
FS-SPNT. [NUMB 2] SAMPLE GATHERING POINT CODE Must be Valid AER Sample Point Code (See Location as to where First Stage Separator Hydrocarbon Sample
Footnote). was gathered
FS-SPNTN. [CHAR 50] DESCRIPTION OF SAMPLE POINT Can not be null Laboratories unique name describing location of First Stage
Separator Sample Gathering Point
FS-SPRES.KPAA [NUMB 8,2] SAMPLE PRESSURE Mandatory, if [FS-SDAT] (Date Sampled) > 2004 First Stage Separator Pressure as sampled (in field) - kPaa
09 30. Can not be zero
FS-STEMP.DEGC [NUMB 5,2] SAMPLE TEMPERATURE Mandatory, if [FS-SDAT] (Date Sampled) > 2004 First Stage Separator Temperature as sampled (in field) - DegC
09 30. Can be zero
FS-RPRES.KPAA [NUMB 8,2] RECEIVED PRESSURE Can not be zero First Stage Separator Pressure as received (in Lab) -kPaa
FS-RTEMP.DEGC [NUMB 5,2] RECEIVED TEMPERATURE Can be zero First Stage Separator Temperature as received (in Lab) - DegC
FS-ADAT.DAY [YYYY MM DD] DATE ANALYZED Must be >= [SDAT] (Date Sampled) and <= Date in which First Stage Separator sample was analyzed
Submission Date

02/17/2022 Page 33 of 70 PAS File Formats

GAS ANALYSIS FILE
(GAN)
~ DATA TABLE - FIRST STAGE SEPARATOR GAS ANALYSIS
# (DTFSGAS - DEFINITIONS AND DESCRIPTIONS IN ASSOCIATION WITH DTFSGAS TABLES)
# If [STYP] (SAMPLE TYPE) = (C)ondensate, then ~DTFSGAS Table must be blank.
# {Rows and Columns are fixed}
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
COMPCOM [CHAR 11] Composition Components
MOLG.FRAC [NUMB 5,4] Molal Fraction Air Free Mandatory Must Total 1.0000, plus or minus 0.001 Representative Mole Fractions - Air Free as Received
for rounding. Can = zero
MOLAGF.FRAC [NUMB 5,4] Molal Fraction Acid Gas/Air Free Mandatory Must Total 1.0000, plus or minus 0.001 Representative Mole Fractions - Air Free/Acid Gas Free
for rounding. Can = zero
LIQVOL.ML/M3 [NUMB 5,1] Liquid Volume ml/m3 Liquid Volumes ml/m3 - Air Free

~ DTFSGAS
# {Total for FIRST STAGE SEPARATOR GAS ANALYSIS [all mole fractions] MUST TOTAL 1.000 plus or minus 0.001 for rounding.}
COMPCOM MOLG MOLAGF LIQVOl
FS-H2S.FRAC 9.9999 ---------- ----------
FS-CO2.FRAC 9.9999 ---------- ----------
FS-N2.FRAC 9.9999 9.9999 ----------
FS-H2.FRAC 9.9999 9.9999 ----------
FS-HE.FRAC 9.9999 9.9999 ----------
FS-C1.FRAC 9.9999 9.9999 ----------
FS-C2.FRAC 9.9999 9.9999 999.9
FS-C3.FRAC 9.9999 9.9999 999.9
FS-IC4.FRAC 9.9999 9.9999 999.9
FS-NC4.FRAC 9.9999 9.9999 999.9
FS-IC5.FRAC 9.9999 9.9999 999.9
FS-NC5.FRAC 9.9999 9.9999 999.9
FS-C6.FRAC 9.9999 9.9999 999.9
FS-C7+.FRAC 9.9999 9.9999 999.9

02/17/2022 Page 34 of 70 PAS File Formats

GAS ANALYSIS FILE
(GAN)
~ GAS ANALYSIS - DATA PROPERTIES
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
LFNUM. [CHAR 25] LABORATORY FILE NUMBER Can not be zero Identification number
IDENT. [CHAR 12] CONTAINER IDENTITY Can not be zero Identification code of container
RELDEN. [NUMB 4,3] GAS RELATIVE DENSITY Can not be zero Relative Density of First Stage Gas
TSMW. [NUMB 3,1] CALC MOLE WEIGHT OF TOTAL SAMPLE Can not be zero

GHV.MJ/M3 [NUMB 4,2] CALC GROSS HEAT VALUE MOISTURE Can not be zero
FREE
GHVAGF.MJ/M3 [NUMB 4,2] CALC GROSS HEAT VALUE MOISTURE & Can not be zero
ACID GAS FREE
PPVP.KPAA [NUMB 8,2] CALC C5+ VAPOUR PRESSURE (KPAA) Optional

FS-PPC.KPAA [NUMB 8,2] CALC PSEUDO CRITICAL PRESSURE AS Can not be zero First Stage Separator - PPC (kPaa)
SAMPLED
FS-PTC.DEGK [NUMB 5,2] CALC PSEUDO CRITICAL TEMPERATURE Can not be zero First Stage Separator - PTC (Degrees Kelvin)
AS SAMPLED (DegK)
FS-PPCAGF.KPAA [NUMB 8,2] CALC PSEUDO CRITICAL PRESSURE Can not be zero First Stage Separator - PPC - Acid Gas Free (kPaa)
ACID GAS FREE
FS-PTCAGF.DEGK [NUMB 5,2] CALC PSEUDO CRITICAL TEMPERATURE Can not be zero First Stage Separator - PTC - Acid Gas Free (Degrees Kelvin)
ACID GAS FREE (DegK)

H2SLC. [CHAR 1] LOCATION OF H2S MEASUREMENT Mandatory, must indicate location of measurement Location of H2S measurement.
(F)ield, (L)ab or (B)oth. 1 PPM = (0.000001 MOL FRAC) or (0.0001 MOL %)
H2SMT. [CHAR 1] METHOD OF FIELD ANALYSIS Mandatory, if [H2SLC] (Location of H2S Method of H2S detection.
Measurement) = (F)ield or (B)oth. [H2SMT] must =
(T)utwieler, (L)itmus, (C)hromatograph, (O)ther,
(S)tain Tube or (N)ot Measured.
Must be null if [H2SLC] = (L)ab.

02/17/2022 Page 35 of 70 PAS File Formats

GAS ANALYSIS FILE
(GAN)
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
FLDH2S.PPM [NUMB 7,1] FIELD GAS H2S (PPM) Mandatory, if [H2SLC] (Location of H2S H2S concentration measured in the field in parts per million.
Measurement) = (F)ield or (B)oth and [H2SMT]
(Method of Field Analysis) is not Null, can be zero.
If [H2SMT] = (N), [FLDH2S] must be zero. Must be
null if [H2SLC] = (L)ab.

LABH2S.FRAC [NUMB 5,4] LABORATORY H2S ANALYSIS Mandatory, if [H2SLC] (Location of H2S H2S fraction measured in the lab.
Measurement) = (L)ab or (B)oth. Can be zero.

C7+DN. [NUMB 4,1] DENSITY OF C7+ FRACTION Mandatory, if [FS-C7+.FRAC] (Heptane Plus)
>0.0000, else must be Null Optional
C7+MW. [NUMB 3,1] MOLE WEIGHT C7+ FRACTION Mandatory, if [FS-C7+.FRAC] (Heptane Plus)
>0.0000, else must be Null Optional

# SECOND STAGE SEPARATOR - GAS ANALYSIS

~ HEADER DATA - SECOND STAGE SEPARATOR - GAS ANALYSIS

# {Can not submit a Second Stage Separator Sample, if First Stage Separator Sample is missing.}
# {SECOND STAGE SEPARATOR (SS) is Mandatory if [SEPCOND] (Separator Conditions) = (B)oth}
SS-SDAT.DAY [YYYY MM DD] DATE SAMPLED Must be >= Spud Date and <= Abandoned Date Date Second Stage Separator sample was gathered
and <= Submission Date
SS-SPNT. [NUMB 2] SAMPLE GATHERING POINT CODE Must be Valid AER Sample Point Code (See Location as to where Second Stage Separator Hydrocarbon
Footnote). Sample was gathered
SS-SPNTN. [CHAR 50] DESCRIPTION OF SAMPLE POINT Can not be null Laboratories unique name describing location of Second Stage
Separator Sample Gathering Point
SS-SPRES.KPAA [NUMB 8,2] SAMPLE PRESSURE Mandatory, if [SS-SDAT] (Date Sampled) > 2004 Second Stage Separator Pressure as sampled (in field) - kPaa
09 30. Can not be zero
SS-STEMP.DEGC [NUMB 5,2] SAMPLE TEMPERATURE Mandatory, if [SS-SDAT] (Date Sampled) > 2004 Second Stage Separator Temperature as sampled (in field) - DegC
09 30. Can be zero
SS-RPRES.KPAA [NUMB 8,2] RECEIVED PRESSURE Can not be zero Second Stage Separator Pressure as received (in Lab) - kPaa

SS-RTEMP.DEGC [NUMB 5,2] RECEIVED TEMPERATURE Can be zero Second Stage Separator Temperature as received (in Lab) - DegC

SS-ADAT.DAY [YYYY MM DD] DATE ANALYZED Must be >= [SS-SDAT] (Date Sampled) and <= Date in which Second Stage Separator sample was analyzed
Submission Date

02/17/2022 Page 36 of 70 PAS File Formats

GAS ANALYSIS FILE
(GAN)
~ SECOND STAGE SEPARATOR - GAS ANALYSIS
# {If [SEPCOND] (Separator Conditions) = (B)oth and [STYP] (Sample Type) = (R)ecombination, then SECOND STAGE SEPARATOR - GAS ANALYSIS cannot be blank}
# {Total for SECOND STAGE SEPARATOR GAS ANALYSIS [all mole fractions] MUST TOTAL 1.000 plus or minus 0.001 for rounding.}
# MNEMONIC NAME FIELD SIZE DATA ELEMENT DESCRIPTION BUSINESS RULES AND EDITS CLARIFICATION / EXPLANATION OF MNEMONIC
SS-H2S.FRAC [NUMB 5,4] HYDROGEN SULPHIDE Mandatory, if [SEPCOND] (Separator Conditions)
= (B)oth and [STYP] (Sample Type) =
(R)ecombination, then cannot be null.