Atlas Copco Mobility Air Systems: Oil-Free Scroll Compressor SFR 2-12
Atlas Copco Mobility Air Systems: Oil-Free Scroll Compressor SFR 2-12
Atlas Copco Mobility Air Systems: Oil-Free Scroll Compressor SFR 2-12
i Less is more: low noise, low vibrations, low life cycle costs
The SFR orbiting scroll compressor is an oil-free, low maintenance compressed air solution validated for all mobility
applications. Reliable, rated for a 100% duty cycle and suited for the harshest conditions. The SFR offers performance and
flexibility with low noise levels, vibrations and life cycle costs. To be installed on top of, inside or underneath the vehicle;
special light-weight models for electric and hybrid buses. Available from 200 to 1550 l/min (7 to 55 cfm) free air delivery.
8
2 4
1
7
1 Optimized cooling fan to obtain 4 Top quality oil-free scroll element 7 High efficiency, totally enclosed fan-
a fully balanced compressor for with patented super flow for high cooled (TEFC), IP 55, class F railway-
smooth running with start and performance and extended lifetime, approved electric motor for continuous
operating capabilities between even in the worst ambient conditions, trouble-free operation with greased-
-40 °C /-40 °F and +50 °C /122 °F. in one-stage and intercooled for-life bearings.
two-stage version.
2 Shock and vibration-resistant, 8 The Full Feature version includes
FEM-calculated, multilayer-coated 5 Heavy duty air inlet filter for integrated filters and a membrane
steel frame, welded according to efficient operation in dusty dryer to remove particles, condensate
EN 15085 for direct mounting and environments. water and vapor from the compressed
installation on the vehicle roof, air to protect your piping network and
6 Direct drive concept for lean
inside or under floor. dimensions, low weight, short brake system from freezing, corrosion
3 Integrated vibration dampers for service time, high reliability and and staining.
minimum transfer of vibrations low life cycle costs.
to and from the compressor.
OPTIONS
Manifold For easy installation of Control cubicle To be able to control the Different approvals CE, ASME, etc.
all required safety and measuring compressor as a stand-alone unit without Control pressure switch To regulate
devices on a single manifold. expensive system integration. the compressor according to air
Full Feature version One packaged Control voltage connector To easily demand by measuring the pressure in
unit contains water separator, connect control voltage cables. the system.
filter and membrane dryer to Motor voltage connector To easily Inlet filter switch For remote signaling
achieve an outlet air quality up to connect power voltage cables. in case the inlet filter is clogged.
1.2.0 according ISO 8573-1. Customized frame To easily integrate
the complete package into the
available space in, under or on top of
the railway vehicle.
TECHNICAL SPECIFICATIONS
Shaft Maximum Sound
Capacity
Compressor type power Pressure pressure level
Reference conditions:
Absolute inlet pressure: 1 bar (14.5 psi)
Intake air temperature: 20 °C (68 °F)
Mean noise level measured according to ISO 2151/Pneurop/Cagi PN8NTC2
at 4.6 meter free field
Unit performance measured at a standard unit (before dryer) according to
ISO 1217, Annex C, latest edition