ZF 85 Iv

ZF 85 IV
TECHNICAL DATA SHEET
ZF 85 SERIES
PRODUCT DETAILS
Description
 Reverse reduction marine transmission with hydraulically actuated multi-disc clutches
 Suitable for high performance applications in luxury motoryachts, sport fishers, express cruisers etc
 Compatible with all types of engines and propulsion systems, including waterjets and surface- piercing propellers, as
applicable
 Robust design also withstands continuous duty in workboat applications
 Fully works tested, reliable and simple to install
 Design, manufacture and quality control standards comply with ISO 9001
Features
 B/W connection integrated with casing
 Case hardened and precisely ground gear teeth for long life and smooth running
 Smooth and reliable hydraulic shifting with control lever for attachment of push-pull cable
 Suitable for twin engine installations (same ratio and torque capacity in ahead or astern mode)
 Compact, space saving design; 12° vee-angle and beveloid gear
 Output shaft thrust bearing designed to take maximum propeller thrust astern and ahead
 Oil drain plug
 Lightweight and robust aluminum alloy casing (sea water resistant)
 Replaceable oil filter
 Integrated bosses for speed pick-up installation at output flange
ZF 85 IV
RATINGS
Ratios Power Factor Input Power Capacity Max. Max. Max.

'A' Pos 'B' Pos kW/RPM hp/RPM kW hp kW hp kW hp kW hp RPM
Pleasure Duty - Diesel 2800 RPM 3000 RPM 3300 RPM
1.644 1.638 0.1114 0.1494 312 418 334 448 368 493 390 523 3500
2.008 1.996 0.1114 0.1494 312 418 334 448 368 493 390 523 3500
2.493 2.468 0.1114 0.1494 312 418 334 448 368 493 390 523 3500
Light Duty - Diesel 2100 RPM 2500 RPM 2800 RPM
1.644 1.638 0.1043 0.1399 219 294 261 350 292 392 365 490 3500
2.008 1.996 0.1043 0.1399 219 294 261 350 292 392 365 490 3500
2.493 2.468 0.1043 0.1399 219 294 261 350 292 392 365 490 3500
Medium Duty - Diesel 2100 RPM 2500 RPM 2800 RPM
1.644 1.638 0.0889 0.1192 187 250 222 298 249 334 311 417 3500
2.008 1.996 0.0889 0.1192 187 250 222 298 249 334 311 417 3500
2.493 2.468 0.0838 0.1124 176 236 210 281 235 315 293 393 3500
Continuous Duty - Diesel 1800 RPM 2100 RPM 2400 RPM
1.644 1.638 0.0726 0.0974 131 175 152 205 174 234 232 312 3200
2.008 1.996 0.0726 0.0974 131 175 152 205 174 234 232 312 3200
2.493 2.468 0.0696 0.0933 125 168 146 196 167 224 223 299 3200
* Special Order Ratio
'A' Pos: Continuous running position
'B' Pos: Reverse position
Timestamp: 10.05.2017 14:36:13 - Technical Data Sheet - ZF 85 IV 2

ZF 85 IV
DIMENSIONS
A B1 B2 H1 H2 L0 L1 L2
Millimeter (mm)
246.0 190.0 190.0 132.0 388.5 370.0 375.0 76.0
Inch (in)
9.69 7.48 7.48 5.2 15.3 14.57 14.76 2.99
Angle (°) Weight (kg) Weight (lb) Amount of Oil (l) Amount of Oil (qt)
12 86 190 7.0 7.4
BELL HOUSING DIMENSIONS
Bolt Holes
A B C L3
Name Diameter
No.
mm in mm in mm in mm in mm in
SAE 2 447.68 17.63 466.73 18.38 488.95 19.25 13.0 0.51 12 10.32 0.41
SAE 3 409.58 16.13 428.63 16.88 450.85 17.75 11.0 0.43 12 10.32 0.41
3 CAT
B/W
Volvo D4-D6
OUTPUT FLANGE DIMENSIONS
Bolt Holes
A B C D
Diameter (E)
No.
mm in mm in mm in mm in mm in
146.0 5.75 120.65 4.75 76.2 3.0 16.0 0.63 6 13.0 0.51

GENERAL INFORMATION
Duty Definitions
Pleasure Duty
Highly intermittent operation with very large variations in engine speed and power.
500 hours/year
Average engine operating hours limit:
300 hours/year for mechanical gearboxes
Typical hull forms: Planing
Applications: Private, non-commercial, non-charter leisure activities, no racing
Light Duty
Intermittent operation with large variations in engine speed and power.
2500 hours/year
Average engine operating hours limit:
(for hydraulic transmissions smaller than ZF 2000 series, 2000 hours/year)
Typical hull forms: Planing and semi-displacement
Typical applications: Private and charter, sport/leisure activities, naval and police activities
Medium Duty
Intermittent operation with some variations in engine speed and power.
4000 hours/year
Average engine operating hours limit: (for hydraulic transmissions smaller than ZF 2000 series and workboat ZF W2700 series, 3500
hours/year)
Typical hull forms: Semi-displacement and displacement
Typical applications: Charter and commercial craft (example: crew boats), and naval and police activities
Continuous Duty
Continuous operation with little or no variations in engine speed and power.
Average engine operating hours limit: Unlimited
Typical hull forms: Displacement
Typical applications: Heavy duty commercial vessels
Technical Notes
Duty Ratings
Ratings apply to marine diesel engines at the indicated speeds. At other engine speeds, the respective power capacity (kW) of the
transmission can be obtained by multiplying the Power/Speed ratio by the speed. Approximate conversion factors:
 1 kW = 1.36 metric hp
 1 kW = 1.34 U.S. hp (SAE)
 1 U.S. hp = 1.014 metric hp
 1 Nm = 0.74 lb.ft.
 1 Kg = 0.454 lb
Ratings apply to right hand turning engines, i.e. engines having counterclockwise rotating flywheels when viewing the flywheel end of the
engine. These ratings allow full power through forward and reverse gear trains, unless otherwise stated. Contact your nearest ZF Sales and
Service office for ratings applicable to gas turbines, as well as left hand turning engines, and marine transmissions for large horsepower
capacity engines. Ratings apply to marine transmissions currently in production or in development and are subject to change without prior
notice.
NOTE: The maximum rated input power must not be exceeded (see respective ratings in the technical data sheets).
Safe Operating Notice
The safe operation of ZF products depends upon adherence to technical data presented in our brochures. Safe operation also depends upon
proper installation, operation and routine maintenance and inspection under prevailing conditions and recommendations set forth by ZF.
Damage to transmission caused by repeated or continous emergency manoeuvres or abnormal operation is not covered under warranty. It is
the responsibility of users and not ZF to provide and install guards and safety devices, which may be required by recognized safety standards
of the respective country (e.g. for U.S.A. - the Occupational Safety Act of 1970 and its subsequent provisions).
Monitoring Notice
The safe operation of ZF products depends upon adherence to ZF monitoring recommendations presented in our operating manuals, etc. It is
the responsibility of users and not ZF to provide and install monitoring devices and safety interlock systems as may be deemed prudent by ZF.
Consult ZF for details and recommendations.
Survey Society Classification
In most cases, the maximum medium and continous duty ratings permitted by ZF are accepted in full by major classification societies. If
classification is required, contact ZF regarding proper procedures (also for yacht service and ice classifications service).
Dimensions and Weights
Dimensions and weights refer to transmissions with bell housing (where appropriate) but excluding options such as: trolling valves, power
take-offs, propeller shaft companion flanges, torsional couplings etc.
Torsional Vibration and Torsional Couplings

The responsibility for ensuring torsional vibration compatibility rests with the overall propulsion system integration responsible party.
Compatibility check of torsional vibration must include excitations induced by engine governor. ZF cannot accept any liability for gearbox noise
or for damage to the gearbox, the flexible coupling or to other parts of the drive unit caused by torsional vibrations. Contact ZF for further
information and assistance.
For single engine powered boats, where loss of propulsion can result in loss of control, ZF recommends the use of a torsional limit stop. It is
the buyer's responsibility to specify this option. ZF cannot accept any liability for personal injury, loss of life or damage or loss of property due
to the failure of the buyer to specify a torsional limit stop.
ZF selects torsional couplings on the basis of nominal input torque at commonly rated engine speeds. Consult ZF for details concerning speed
limits of standard offered torsional couplings, which can be below transmission limits. Special torsional couplings may be required for Survey
Society requirements.

ZF 85 Iv

Uploaded by

Copyright:

Available Formats

ZF 85 Iv

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ZF 85 Iv

Uploaded by

Copyright:

Available Formats

ZF 85 IV

TECHNICAL DATA SHEET

Ratios Power Factor Input Power Capacity Max. Max. Max.

Timestamp: 10.05.2017 14:36:13 - Technical Data Sheet - ZF 85 IV 2

BELL HOUSING DIMENSIONS

OUTPUT FLANGE DIMENSIONS

Timestamp: 10.05.2017 14:36:13 - Technical Data Sheet - ZF 85 IV 3

Torsional Vibration and Torsional Couplings

Timestamp: 10.05.2017 14:36:13 - Technical Data Sheet - ZF 85 IV 4

You might also like