N AV I G AT I O N S Y S T E M S

TELEDYNE TSS W O R L D L E A D E R S I N M A R I N E I N S T R U M E N TAT I O N

Meridian Gyrocompasses
M A R I N E N AV I G AT I O N S Y S T E M S

Highly accurate performance with

low cost of ownership.
The Meridian gyrocompass product range is suitable for the ever-changing needs
of a modern integrated navigation bridge system. This includes highly accurate
performance with low cost of ownership and system flexibility. Due to the
Meridian’s small size and fast settle time of less than 45 minutes, there are no
limits to the type of vessel for which it is suitable.
The Meridian gyrocompass can be installed as a stand-alone unit
or, together with any of the Meridian range of repeaters and ancillaries,
it becomes a single, dual or triple gyro system. The Meridian can also
be used to replace many existing gyrocompasses as a retrofit unit.
For simple installation the Meridian offers a large array of digital
and analogue outputs plus easy to use set-up and self-test
modes that are activated via the control unit. The versatility
and flexibility of the Meridian can be clearly demonstrated with
the remote control unit option which gives freedom to install the
main unit in the most convenient location whilst installing the
remote control unit where it can be seen and regularly used.
Unlike other marine navigation gyrocompass currently available, the
Meridian has a maintenance-free dry element with a meantime
between failure of more than 30,000 hours; and post- installation
there are no scheduled annual maintenance and servicing costs.

Type approved to marine equipment directive

Economic one-box solution
Fast initial settle time
Small, lightweight and versatile
High dynamic heading accuracy
Versatile range of repeaters and ancillaries
Subsea variants also available

UMENT
STR AT
IN I
E
ON
N
RS IN MARI
E
AD

LE
D
WORL
 N AV I G AT I O N S Y S T E M S

Meridian Standard Meridian Surveyor

The heart of the Meridian gyrocompass is the element, The Meridian Surveyor boasts a wide range of interfaces to
which is a dynamically tuned gyroscope (DTG). The DTG is enable use on any marine vessel. The unit utilises a DTG
a high precision technology which, due to its size, gyro element which provides exceptional performance with
accuracy, reliability and shock an accuracy unmatched by even
resistance, is used in many the latest fibre optic designs.
different applications.
The guaranteed accuracy of
the Meridian gyrocompass is
obtained through
specialised high quality
engineering. This
gives exceedingly
stable heading and
means that the gyro
will follow a high turn
rate of up to 200° per
second.
Note: Subsea variants also
available - see separate data
sheet

Remote Control Unit Option

Speed Log Synchro

Step

GPS 11 off RS422 NMEA

5 off RS232 NMEA

Alarm/Status
D.C.
R.O.T.

A.C. P.S.U. Printer

For simple installation the Meridian offers a large array of digital and analogue outputs plus easy to use digital set-up and
self-test modes that are activated via the control unit.
The versatility and flexibility of the Meridian gyrocompass can be clearly demonstrated with the remote control unit option,
which is supplied with the gyrocompass system. This gives freedom to install the main unit in the most convenient location
whilst installing the remote control unit where it can be seen and regularly used.
 N AV I G AT I O N S Y S T E M S

Meridian
GYROCOMPASSES

Bearing Repeater Data Repeater

Features Features
Precision 360° rotating compass card Clear vacuum fluorescent graphics display
Automatic synchronisation with master compass User selection of display format - simulated 360°
Gimbal mounted tape/digital heading/digital ROT
Integrated illumination control Suitable for steering repeater
Accepts true and magnetic heading data Integral illumination control
Suitable for use with either prism or vane type Accepts true and magnetic heading sentences
azimuth sights Second input for magnetic correction
Pedestal stand and Supplied with swivel bracket for bulkhead or table
bulkhead bracket mounting
mounting DIN front panel for console mounting
options
available

Power Supply Input 18 - 36Vdc (15W) Power Supply Input 18 - 36Vdc (6W)
Signal Inputs 1 x IEC 61162 (NMEA 0183) Signal Inputs 1 x IEC 61162 (NMEA 0183)
1 x step (5-70Vdc)
Signal Outputs 1 x IEC 61162 (NMEA 0183)
Signal Outputs 1 x IEC 61162 (NMEA 0183)
Environmental and EMC Meets or exceeds IEC 60945 weather
Environmental and EMC Meets or exceeds IEC 60945 weather protected equipment
exposed equipment
Physical Dimensions: 96mm x 192mm x 145mm
Physical Dimensions: 287mm x 388mm x 388mm

Azimuth Circle
(Prism and Vane Types) Pedestal Stand Bulkhead Bracket
Digital Repeater Dial Repeater
Features Features
4-digit LED heading display Precision 360° rotating compass card
LED turning indicator Automatic synchronisation with master compass
Integral illumination control Integrated illumination control
Accepts true and magnetic heading sentences Supplied with swivel bracket for bulkhead or table
Second input for magnetic correction mounting
Supplied with swivel bracket for bulkhead or table DIN front panel for console mounting
mounting
DIN front panel for console mounting

Power Supply Input 18 - 36Vdc (10W) Power Supply Input 18 - 30Vac (6W)
Signal Inputs 1 x IEC 61162 (NMEA 0183) Heading Signal Inputs 1 x IEC 61162 (NMEA 0183)
1 x IEC 61162 (NMEA 0183) Magnetic correction Environmental and EMC Meets or exceeds IEC 60945 weather
protected equipment
1 x step (5-70Vdc)
Physical Dimensions: 144mm x 144mm x 100mm
Signal Outputs 1 x IEC 61162 (NMEA 0183)
Environmental and EMC Meets or exceeds IEC 60945 weather
protected equipment
Physical Dimensions: 96mm x 192mm x 145mm
 N AV I G AT I O N S Y S T E M S

Heading Repeater Step Retransmission

Features Unit
Large, clear vacuum fluorescent graphics display
Features
User selection of display format - simulated 360°
tape/digital heading/digital ROT Converts 5V step code from gyrocompass to
Dual input - compass comparator display 24V, 35V, 50V or 70V power output
Suitable for steering repeater Isolated input
Integral illumination control 4 output channels each independently protected
Supplied with swivel bracket for bulkhead or table against overloads
mounting Unit operates from 24Vdc – step supply internally
DIN fron panel for console mounting generated

Power Supply Input 18 - 36Vdc (15W) Power Supply Input 18 - 36Vdc (100W)
Signal Inputs 2 x IEC 61162 (NMEA 0183) Signal Inputs 1 x step (5Vdc) 6 steps per degree
1 x Step (5-70Vdc)
1 x Synchro (option) Signal Outputs 4 x step (24V, 35V, 50V or 70V)
1 x step (5Vdc)
Signal Outputs 1 x IEC 61162 (NMEA 0183) 1 x alarm relay (voltage free contacts)
Environmental and EMC Meets or exceeds IEC 60945 weather Environmental and EMC Meets or exceeds IEC 60945 weather
protected equipment protected equipment
Physical Dimensions: 144mm x 288mm x 130mm Physical Dimensions: 400mm x 300mm x 120mm

Note: A Compass Changeover Switch is also available - see separate data sheet.
 N AV I G AT I O N S Y S T E M S

Meridian Gyrocompasses
T E C H N I C A L S P E C I F I C AT I O N S

Standard Surveyor
Display 360° compass card and digital display
Performance Settle point error 0.25° secant latitude 0.10° secant latitude
Settle point repeatability 0.25° secant latitude 0.10° secant latitude
Static accuracy 0.10° RMS secant latitude 0.05° RMS secant latitude
Dynamic accuracy 0.30° secant latitude 0.20° secant latitude
scorsby/intercardinal motion scorsby/intercardinal motion
Follow-up speed ~200°/second
Settling time <45 minutes to within 0.70° (from initial 30°)
Outputs S’ type 1 x Step by Step (5V TTL), 6 steps per degree
Synchro 1 x 26V 400Hz sector value 360° (1:1 ratio) 11.8V line to line
Serial data 11 x RS422, NMEA 0183 (IEC 61162-1/2) 5 x RS422, NMEA 0183 (IEC 61162-1/2)
5 x RS232, NMEA 0183
1 x printer port, NMEA 0183 5 x 20mA current loop
1 x ROT (±10V)
Status/alarm 5V TTL power fail/gyro fail
5V TTL system ready
Potential free status and alarm relays
Inputs Latitude Automatic - via RS232 or RS422, NMEA 0183 from GPS or manual
Speed Automatic - via RS232 or RS422, NMEA 0183 from log or
pulse/contact closure at 100, 200 or 400/NM form log or manual
Compensation Latitude 80°N to 80°S
Speed 0-90 knots
Environmental Ambient operating temperature 0°C – 45°C (–15°C – +55°C with reduced accuracy)
Storage temperature –25°C – +80°C
Gimbal limits ±45° roll and pitch
Meantime between failures (MTBF) >30,000 hours (calculated); >100,000 hours (in service data)
Shock (survival) 10g
Operating Voltage Input voltage 24V DC (19-36V DC)
Power Start-up >3A at switch on / <1.5A in ready mode
Dimensions Size 344mm (h) x 267mm (w) x 440mm (d)
Weight 15.5Kg
Accessories Included Operator handbook, spare fuse Operator manual, transit case, spare connectors
Optional Remote control unit, various repeaters and accessories
Standards IMO A424(X1), IMO A821(19), IEC 60945, ISO 8728, ISO 16328, IEC 6228,
Marine Equipment Directive 96/98/EC
Warranty 24 months (from date of invoice) including parts and labour.
Due to continuous development, specifications may vary from those listed above.

Head Office: Aberdeen: Houston:

UMENT 1 Blackmoor Lane, 10 The Technology Centre, Hammerly Blvd,
STR AT
IN I Croxley Green Business Park, Aberdeen Science & Energy Park, Suite 128,
E Watford, Hertfordshire Claymore Drive, Bridge of Don, Houston TX 77043, USA
ON
IN

WD18 8GA, UK Aberdeen AB23 8GD, UK Tel: +1 713 461 3030

R
IN MA

Tel: +44 (0)1923 216020 Tel: +44 (0)1224 707081 Fax: +1 713 461 3099
Fax: +44 (0)1923 216061 Fax: +44 (0)1224 707085 Email: tsssales@teledyne.com
Email: tsssales@teledyne.com Email: tsssales@teledyne.com
ERS
AD

LE
D
WORL www.teledyne-tss.com
REF: 400001/2-1111