Check Valve

Poppet Type
Metric Cartridge – 350 bar
RVM10120-51
Up to 100 bar
Up to 350 l/min

FUNCTION FEATURES
zz High performance version for high cycle rate
zz Main application is to prevent uncontrolled movement or creeping of loaded
cylinders and also to shut-off sections of the system
zz External surfaces zinc-plated
zz Hardened and ground valve components to ensure minimal wear and extended
service life
zz Improved wear resistance, achieved by a guided and dampened piston

SPECIFICATIONS
Operating pressure: max. 350 bar
Nominal flow: max. 100 l/min
Internal leakage: leakage-free
(max. 5 drops ≙ 0,25 cm³/min at 350 bar)
Cracking pressure: 0.5 bar (others on request)
Media operating temperature range: min. -30 °C to max. +100 °C
Ambient temperature range: min. -30 °C to max. +100 °C
Operating fluid: Hydraulic oil to DIN 51524 Part 1 and 2
Viscosity range: min. 2.8 mm²/s to max. 800 mm²/s
Filtration: Class 21/19/16 according to ISO 4406 or
cleaner
MTTFd: 150 years (see "Conditions and
instructions for valves" in brochure 5.300)
Installation: No orientation restrictions
Material: Valve body: free-cutting steel
Poppet: hardened and
The RVM06020-51 is a direct-acting, ground steel
spring-loaded, poppet check valve.
Seals: NBR (standard)
When there is no flow through the valve, FKM (optional, media
the spring holds the cone poppet in the temperature range
E 5.999.1.1/01.13

closed position and therefore shuts off -20 °C to +120 °C)

port 2 from port 1. The valve opens Back-up rings: PTFE
when the pressure at port 1 is higher
Cavity: 10120
than the pressure at port 2, including the
pressure created by the spring force. Weight: 0.12 kg

238
DIMENSIONS MODEL CODE
RVM  10120 – 51 – C – N – 0.5
Basic model
Check valve, metric

Cavity
10120 = 2-way cavity

Type
51 = poppet, optimized for high cycle rate

Body and ports

C = cartridge

Seals
N = NBR (standard)
V = FKM (optional)
hex. SW 27
MA = 80+10 Nm Cracking pressure
0.5 = 0.5 bar
Others on request

thru

Standard models
Model code Part No.
RVM10120-51-C-N-0.5 3420466

40 thick
Standard in-line bodies
Code Part No. Material Ports Pressure
R10120-01X-01 395234 Steel, zinc-plated G 1/2 420 bar
R10120-01X-02 395235 Steel, zinc-plated M22x1.5 420 bar

Seal kits
Code Material Part No.
millimeter SEAL KIT 10120-NBR NBR 3382346
subject to technical modifications SEAL KIT 10120-FKM FKM 3178281

cavity PERFORMANCE
10120 Measured at ν = 34 mm2/s, Toil = 46 °C
Pressure drop [bar]
fitting depth

bar
0.5
ure:
press
king
crac

Flow rate l/min

Form tools
Tool Part No.
Countersink 170418
E 5.999.1.1/01.13

Note HYDAC Fluidtechnik GmbH

Reamer 1014206 The information in this brochure relates to the Justus-von-Liebig-Str.
operating conditions and applications described. D-66280 Sulzbach/Saar
Tap 1002627 For applications or operating conditions not
Tel: 0 68 97 /509-01
millimeter
described, please contact the relevant technical
Plug gauge 169394 subject to technical modifications department. Fax: 0 68 97 /509-598
Subject to technical modifications. E-Mail: flutec@hydac.com

239