Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 35 views

    FQ000001 Lacquer Cold Check

    Uploaded by

    Carlos Perez
    This document provides a test procedure for evaluating cold check on lacquer coated wood panels. The test modifies ASTM 1211-87 to subject samples to temperatures of 120°F for 1 hour and -20°F for 1 hour over 10 cycles in an environmental chamber. Samples are to be aged 10 days before testing. The report will document the lacquer type, number of panels, wood species, presence of cold check after 7 and 10 cycles.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    FQ000001 Lacquer Cold Check

    Uploaded by

    Carlos Perez
    35 views1 page
    This document provides a test procedure for evaluating cold check on lacquer coated wood panels. The test modifies ASTM 1211-87 to subject samples to temperatures of 120°F for 1 hour and -20°F for 1 hour over 10 cycles in an environmental chamber. Samples are to be aged 10 days before testing. The report will document the lacquer type, number of panels, wood species, presence of cold check after 7 and 10 cycles.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a test procedure for evaluating cold check on lacquer coated wood panels. The test modifies ASTM 1211-87 to subject samples to temperatures of 120°F for 1 hour and -20°F for 1 hour over 10 cycles in an environmental chamber. Samples are to be aged 10 days before testing. The report will document the lacquer type, number of panels, wood species, presence of cold check after 7 and 10 cycles.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    35 views1 page

    FQ000001 Lacquer Cold Check

    Uploaded by

    Carlos Perez
    This document provides a test procedure for evaluating cold check on lacquer coated wood panels. The test modifies ASTM 1211-87 to subject samples to temperatures of 120°F for 1 hour and -20°F for 1 hour over 10 cycles in an environmental chamber. Samples are to be aged 10 days before testing. The report will document the lacquer type, number of panels, wood species, presence of cold check after 7 and 10 cycles.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    DESCRIPTION: Lacquer Cold Check DWG NO: FQ000001

    KEY NOUN: Test DATE: 03/08/95

    REVISIONS
    NO. WAS DATE BY ECN NO.
    1 Updated into Word for InfoView Oct-01 WL 15078
    2 Added ASTM information Sep-04 GR 15742

    I. SCOPE
    This test covers the requirements for testing cold check on finished lacquer coated wood panels.
    Reference ASTM 1211-87 which has been modified from a low of -5° to -20° to better represent the
    climate our units will see. Also, the samples are cycled in the Environmental Chamber instead of
    directly from oven to freezer. [2]

    II. APPARATUS
    - Environmental Chamber

    III. TEST SPECIMENS


    The number and type of test panels (specie of wood and type of lacquer) to be used shall be
    mutually agreed upon by the test requester and the Quality Lab. The panels should be aged 10
    days from process date to test start date. [2]

    IV. PROCEDURE
    A. Place the panel(s) in the environmental chamber in a rack holding the panels vertically.

    B. Run the chamber for seven (7) cycles with each cycle consisting of a minimum of one (1) hour
    at 120 degrees F and a minimum of one (1) hour at –20 degrees F.

    C. Check the panel(s) for and indication of cold check.

    D. Run the chamber for three (3) additional cycles.

    E. Check the panel(s) for any indication of cold check.

    V. REPORT
    The report shall include the following:

    1. The type of lacquer being tested.

    2. The number of panels tested.

    3. The species of wood panels tested.

    4. The presence of cold check after seven (7) cycles (amount of cold check defined qualitatively).

    5. The presence of cold check after ten (10) cycles (amount of cold check defined qualitatively).

    NOTICE:
    THIS DRAWING AND ALL INFORMATION THEREON IS THE PROPERTY OF:
    BATESVILLE CASKET COMPANY, INC.
    BATESVILLE, INDIANA
    THIS DRAWING AND INFORMATION THEREON IS CONFIDENTIAL, MUST NOT BE MADE PUBLIC OR COPIED, OR USED FOR ANY PURPOSES OTHER
    THAN THE BATESVILLE CASKET COMPANY, INC., PURPOSES FOR WHICH IT IS FURNISHED IT MUST BE RETURNED ON DEMAND.

    P:\GROUPS\ENGRSERV\TESTPROFLDR

    You might also like