Non-Clog Submersible Pump DML Non-Clog Submersible Pump DML

DIMENSION WITH QDC DIMENSION WITH QDC

PUMP
Applicable Models - 80 52.2, 53.7 Applicable Models - 80(100)(150) DML Note:
1. For detailed dimensions of the
pumps, refer to separate dimension
data sheets.
Note: 2. The discharge bend and
companion flange supplied with the
1. For detailed dimensions of the pump are used with the QDC.
pumps, refer to separate dimension
data sheets. 3. The weight in dimension tables
refers only to the weight of the QDC.
Non-Clog Submersible Pump
2. The discharge bend and
companion flange supplied with the
4. Standard accessories supplied Type DML
with QDC include:-
pump are used with the QDC.
- Connector body with
foundation bolts
3. The weight in dimension tables - Guide pipe support
refers only to the weight of the QDC. - Sliding glide
- Adaptor flange
APPLICATIONS Single Channel Impeller (Type M)
Guide rail is not supplied. Permit 76mm Solid Passage
4. Standard accessories supplied
with QDC include:-
• Sewage • Effluent
- Connector body with • Waste Water • Dewatering Robust EBARA Design
foundation bolts
- Guide pipe support
- Sliding glide FEATURES
- Adaptor flange
Guide rail is not supplied.
• Non-clog, single channel impeller has 76mm (3'') spherical passage;
prevents clogging; high efficiency and saves energy.
DA DE DF DG DT DN DD • Robust construction - large diameter, short overhang shaft with
80 150 185 126 18 8 15 stainless steel fasteners.
100 175 210 151 20 8 15 • Double mechanical seals - hard faced upper and lower seals operate
150 240 280 212 22 8 19 in an oil bath; providing longer service life and lower maintenance costs.
Dish. QDC QDC • Air-filled, Class F insulated, heavy duty motor, operates cooler with
Pump A P1 P2 G1 G2 F H1 H2 H3 L1 L6 BN1 BN2 BM BY1 BW DM I D1 E1 Weight
bore Model kg higher efficiencies.
80 DML 55.5 80 628 105 105 185 210 365 240 265 335 310 31 100 40 220 180 230 800 700 19 175 LL100 46 • High quality stainless steel shaft; provides high tensile strength,
80 DML 57.5 80 628 105 105 185 210 365 240 265 335 310 31 100 40 220 180 230 800 700 19 175 LL100 46 corrosion resistance.
80 DML 511 80 721 105 105 185 210 365 240 265 335 329 15 100 40 220 180 230 1000 700 19 175 LL100 46 • Dry-pit is available as optional.
80 DML 515 80 721 105 105 185 210 365 240 265 355 329 15 100 40 220 180 230 1000 700 19 175 LL100 46
80 DML 522 80 765 105 105 185 210 365 240 265 335 332 12 100 40 220 180 230 1000 700 19 175 LL100 46
DA DE DF DG DT DN DD 100 DML 51.5 100 552 105 105 185 210 365 240 255 325 279 52 100 40 220 180 230 800 700 19 155 LL100 46
80 150 185 126 18 8 15 100 DML 52.2 100 552 105 105 185 210 365 240 255 325 279 52 100 40 220 180 230 800 700 19 155 LL100 46
100 DML 53.7 100 552 105 105 185 210 365 240 255 325 279 52 100 40 220 180 230 800 700 19 155 LL100 46
100 DML 55.5 100 628 105 105 185 210 365 240 265 335 310 31 100 40 220 180 230 800 700 19 175 LL100 46
100 DML 57.5 100 628 105 105 185 210 365 240 265 335 310 31 100 40 220 180 230 800 700 19 175 LL100 46
100 DML 511 100 721 105 105 185 210 365 240 265 335 329 15 100 40 220 180 230 1000 700 19 175 LL100 46
100 DML 515 100 721 105 105 185 210 365 240 265 335 329 15 100 40 220 180 230 1000 700 19 175 LL100 46
QDC 100 DML 522 100 765 105 105 185 210 365 240 265 335 332 12 100 40 220 180 230 1000 700 19 175 LL100 46
Disch. QDC
Pump Model A P1 P2 G1 G2 F H1 H2 H3 L1 L6 BN1 BN2 D1 E1 Weight 150 DML 55.5 150 628 105 105 185 235 400 240 265 335 210 21 100 40 220 180 230 800 700 19 175 LL100 46
bore Model kg
80 DML 52.2 80 492 75 90 125 165 285 175 230 280 279 7 75 90 15 155 LM80 17 150 DML 57.5 150 628 105 105 185 235 400 240 265 335 310 31 100 40 220 180 230 800 700 19 175 LL100 46

80 DML 53.7 80 492 75 90 125 165 285 175 230 280 279 7 75 90 15 155 LM80 17 150 DML 511 150 721 105 105 185 235 400 240 265 335 329 15 100 40 220 180 230 1000 700 19 175 LL100 46
150 DML 515 150 721 105 105 185 235 400 240 265 335 329 15 100 40 220 180 230 1000 700 19 175 LL100 46
150 DML 522 150 765 105 105 185 235 400 240 265 335 332 12 100 40 220 180 230 1000 700 19 175 LL100 46
Units: mm unless otherwise specified
* Dimensional details are provided for reference only.
* All specifications are subject to change without prior notice.

Authorised dealer:
EBARA Pumps Malaysia Sdn Bhd
6, Jalan TP3, UEP Subang Jaya Industrial Park,
47620 Subang Jaya, Selangor, Malaysia.
Tel : 03-8023 6622 Fax : 03-8023 9355
Email : sales@ebara.com.my
Website : www.ebara.com.my
EPM DML 0313
 Non-Clog Submersible Pump DML Non-Clog Submersible Pump DML Non-Clog Submersible Pump DML

PERFORMANCE CHART TECHNICAL FEATURES DIMENSION

CABLE ENTRY
60 Unique vulcanised, three way
DML-50HZ - 1450min -1 MOTOR PROTECTION
50 sealing cable entry prevents
In-built thermal overload or water entry
80 DML
40 100 miniature thermal protectors
522 DML
30 522 15
515 0
DM
515 L MOTOR
511
Only quality EBARA motor
20

52
57.5 511 being used, thus single

2
51
MODEL CODE ALL FASTENERS
Total Head (m)

15 55.5 5 manufacturer warranty assured

57.5 made of
53.7 80 DML 5 2.2 STAINLESS STEEL
55.

51
5 Motor Output: kW

1
10
9

57
8 80(1 DOUBLE MECHANICAL SEAL
00)

.5
7 D ML 53 Frequency 50Hz ensure long lasting operation.
100 5 .7
2.2

55
6 DM
L
.5
51.
5 5 Type
4
Discharge Size (mm) BALL BEARINGS are
3 Single channel non-clog IMPELLER,
0.15 0.2 0.3 0.5 0.7 1.0 2.0 3.0 4.0 5.0 6.0 8.0 permanently lubricated high permit large solid passage, thus
temperature type preventive clogging.
Capacity (m3/min) DA DE DF DG DT DN DD
80 150 185 126 18 8 15
100 175 210 151 20 8 15
SPECIFICATIONS 150 240 280 212 22 8 19

Pump
Liquid Type of liquid Sewage, Wastewater Output CL Weight
Size Model A B C D E F H J L1
Handled Temperature 0°C~40°C kW (m) kg
SECTIONAL VIEW
Min solids size 76mm 80 DML 52.2 2.2 534 320 378 157 285 298 668 210 278 10 80
Maximum Submergence 8m 80 DML 53.7 3.7 534 320 378 157 285 298 727 210 279 10 87
Minimum Submergence Refer to water level (L.W.L.) in dimensions Item Quantity 80 DML 55.5 5.5 640 381 453 188 360 334 824 255 310 10 118
It is possible to operate at low water level Number Description Material per unit
80 80 DML 57.5 7.5 640 381 453 188 360 334 824 255 310 10 123
for 30min 001 Pump Casing FC2001 Cast iron 1
016
Mechanical
FC200 Cast iron 1
80 DML 511 11 734 455 513 221 420 350 938 315 329 10 157
Synchronous Speed 1500min-1 Seal Cover
80 DML 515 15 734 455 513 221 420 350 938 315 329 10 163
Mechanical seal Double mechanical seal 021 Impeller FC200 Cast Iron 1
Construction Impeller Single channel, non-clog 080 Bushing SS Steel 1 80 DML 522 22 777 497 533 245 440 353 1021 335 332 10 223

Bearing Prelubricated bearing 107 Wearing Ring BC Bronze 1 100 DML 51.5 1.5 577 320 420 157 315 313 668 210 279 10 81
Mechanical
Casing Cast iron 111
Seal
1 100 DML 52.2 2.2 577 320 420 157 315 313 668 210 279 10 81
Impeller Cast iron 174 Discharge Pipe FC200 Cast iron 1 100 DML 53.7 3.7 577 320 420 157 315 313 727 210 279 10 89
Material Shaft 403 Stainless steel 193 Oil Plug NBR/Stainless Steel 1 set 100 DML 55.5 5.5 653 381 465 188 360 334 824 255 310 10 121
211 Airvent Valve C3604 Brass 1
Mechanical Impeller side Silicon carbide 100 100 DML 57.5 7.5 653 381 465 188 360 334 824 255 310 10 125
275 Impeller Bolt SUS304 Stainless Steel 1
Seal Motor side Ceramic / Carbon 100 DML 511 11 746 455 525 221 420 350 938 315 329 10 160
801 Rotor 1
O-ring NBR 802 Stator 1 100 DML 515 15 746 455 525 221 420 350 938 315 329 10 166
Motor Submersible
811-1 2 100 DML 522 22 790 497 545 245 440 353 1021 335 332 10 226
Cable (Power)
Type 4 pole, air-filled watertight Submersible 150 DML 55.5 5.5 713 381 525 188 385 369 824 255 310 10 127
811-2 1
Insulation Class F Cable (signal)
150 DML 57.5 7.5 713 381 525 188 385 369 824 255 310 10 132
814 Motor Frame FC200 Cast Iron 1
Protection Built-in overload protector (1.5, 2.2kW) ; Built-in temperature detector protection (3.7 - 22kW)
Power Side 150 150 DML 511 11 806 455 585 221 445 385 938 315 329 10 166
Accessories 816 FC200 Cast Iron 1
Bracket 150 DML 515 15 806 455 585 221 445 385 938 315 329 10 172
Standard Submersible cable: 10m 817
Opposite Side
FC200 Cast Iron 1
Bracket 150 DML 522 22 850 497 605 245 465 388 1021 335 332 10 232
Optional Quick discharge connector, Leakage detector (Electrode type)
830 Shaft SUS403 Stainless Steel 1 Units: mm unless otherwise specified
Dry pit type (DML-D)
849-1 Ball Bearing 1
849-2 Ball Bearing 1
856 Thermal Protector 3
904 Lifting Hanger SS Steel 1
* This sectional view shows typical construction. 907 Bearing Cover SPCC Steel 1
 Non-Clog Submersible Pump DML Non-Clog Submersible Pump DML Non-Clog Submersible Pump DML

PERFORMANCE CHART TECHNICAL FEATURES DIMENSION

CABLE ENTRY
60 Unique vulcanised, three way
DML-50HZ - 1450min -1 MOTOR PROTECTION
50 sealing cable entry prevents
In-built thermal overload or water entry
80 DML
40 100 miniature thermal protectors
522 DML
30 522 15
515 0
DM
515 L MOTOR
511
Only quality EBARA motor
20

52
57.5 511 being used, thus single

2
51
MODEL CODE ALL FASTENERS
Total Head (m)

15 55.5 5 manufacturer warranty assured

57.5 made of
53.7 80 DML 5 2.2 STAINLESS STEEL
55.

51
5 Motor Output: kW

1
10
9

57
8 80(1 DOUBLE MECHANICAL SEAL
00)

.5
D ML 53 Frequency 50Hz:5 ensure long lasting operation.
7 .7
100 5 2.2

55
6 DM M: Single Channel Impeller
L
.5
51.
5 5
Model DL: Manual Version
4
Discharge Size (mm) BALL BEARINGS are
3 Single channel non-clog IMPELLER,
0.15 0.2 0.3 0.5 0.7 1.0 2.0 3.0 4.0 5.0 6.0 8.0 permanently lubricated high permit large solid passage, thus
temperature type preventive clogging.
Capacity (m3/min) DA DE DF DG DT DN DD
80 150 185 126 18 8 15
100 175 210 151 20 8 15
SPECIFICATIONS 150 240 280 212 22 8 19

Pump
Liquid Type of liquid Sewage, Wastewater Output CL Weight
Size Model A B C D E F H J L1
Handled Temperature 0°C~40°C kW (m) kg
SECTIONAL VIEW
Min solids size 76mm 80 DML 52.2 2.2 534 320 378 157 285 298 668 210 278 10 80
Maximum Submergence 8m 80 DML 53.7 3.7 534 320 378 157 285 298 727 210 279 10 87
Minimum Submergence Refer to water level (L.W.L.) in dimensions Item Quantity 80 DML 55.5 5.5 640 381 453 188 360 334 824 255 310 10 118
It is possible to operate at low water level Number Description Material per unit
80 80 DML 57.5 7.5 640 381 453 188 360 334 824 255 310 10 123
for 30min 001 Pump Casing FC2001 Cast iron 1
016
Mechanical
FC200 Cast iron 1
80 DML 511 11 734 455 513 221 420 350 938 315 329 10 157
Synchronous Speed 1500min-1 Seal Cover
80 DML 515 15 734 455 513 221 420 350 938 315 329 10 163
Mechanical seal Double mechanical seal 021 Impeller FC200 Cast Iron 1
Construction Impeller Single channel, non-clog 080 Bushing SS Steel 1 80 DML 522 22 777 497 533 245 440 353 1021 335 332 10 223

Bearing Prelubricated bearing 107 Wearing Ring BC Bronze 1 100 DML 51.5 1.5 577 320 420 157 315 313 668 210 279 10 81
Mechanical
Casing Cast iron 111
Seal
1 100 DML 52.2 2.2 577 320 420 157 315 313 668 210 279 10 81
Impeller Cast iron 174 Discharge Pipe FC200 Cast iron 1 100 DML 53.7 3.7 577 320 420 157 315 313 727 210 279 10 89
Material Shaft 403 Stainless steel 193 Oil Plug NBR/Stainless Steel 1 set 100 DML 55.5 5.5 653 381 465 188 360 334 824 255 310 10 121
211 Airvent Valve C3604 Brass 1
Mechanical Impeller side Silicon carbide 100 100 DML 57.5 7.5 653 381 465 188 360 334 824 255 310 10 125
275 Impeller Bolt SUS304 Stainless Steel 1
Seal Motor side Ceramic / Carbon 100 DML 511 11 746 455 525 221 420 350 938 315 329 10 160
801 Rotor 1
O-ring NBR 802 Stator 1 100 DML 515 15 746 455 525 221 420 350 938 315 329 10 166
Motor Submersible
811-1 2 100 DML 522 22 790 497 545 245 440 353 1021 335 332 10 226
Cable (Power)
Type 4 pole, air-filled watertight Submersible 150 DML 55.5 5.5 713 381 525 188 385 369 824 255 310 10 127
811-2 1
Insulation Class F Cable (signal)
150 DML 57.5 7.5 713 381 525 188 385 369 824 255 310 10 132
814 Motor Frame FC200 Cast Iron 1
Protection Built-in overload protector (1.5, 2.2kW) ; Built-in temperature detector protection (3.7 - 22kW)
Power Side 150 150 DML 511 11 806 455 585 221 445 385 938 315 329 10 166
Accessories 816 FC200 Cast Iron 1
Bracket 150 DML 515 15 806 455 585 221 445 385 938 315 329 10 172
Standard Submersible cable: 10m 817
Opposite Side
FC200 Cast Iron 1
Bracket 150 DML 522 22 850 497 605 245 465 388 1021 335 332 10 232
Optional Quick discharge connector, Leakage detector (Electrode type)
830 Shaft SUS403 Stainless Steel 1 Units: mm unless otherwise specified
Dry pit type (DML-D)
849-1 Ball Bearing 1
849-2 Ball Bearing 1
856 Thermal Protector 3
904 Lifting Hanger SS Steel 1
* This sectional view shows typical construction. 907 Bearing Cover SPCC Steel 1
 Non-Clog Submersible Pump DML Non-Clog Submersible Pump DML Non-Clog Submersible Pump DML

PERFORMANCE CHART TECHNICAL FEATURES DIMENSION

CABLE ENTRY
60 Unique vulcanised, three way
DML-50HZ - 1450min -1 MOTOR PROTECTION
50 sealing cable entry prevents
In-built thermal overload or water entry
80 DML
40 100 miniature thermal protectors
522 DML
30 522 15
515 0
DM
515 L MOTOR
511
Only quality EBARA motor
20

52
57.5 511 being used, thus single

2
51
MODEL CODE ALL FASTENERS
Total Head (m)

15 55.5 5 manufacturer warranty assured

57.5 made of
53.7 80 DML 5 2.2 STAINLESS STEEL
55.

51
5 Motor Output: kW

1
10
9

57
8 80(1 DOUBLE MECHANICAL SEAL
00)

.5
D ML 53 Frequency 50Hz:5 ensure long lasting operation.
7 .7
100 5 2.2

55
6 DM M: Single Channel Impeller
L
.5
51.
5 5
Model DL: Manual Version
4
Discharge Size (mm) BALL BEARINGS are
3 Single channel non-clog IMPELLER,
0.15 0.2 0.3 0.5 0.7 1.0 2.0 3.0 4.0 5.0 6.0 8.0 permanently lubricated high permit large solid passage, thus
temperature type preventive clogging.
Capacity (m3/min) DA DE DF DG DT DN DD
80 150 185 126 18 8 15
100 175 210 151 20 8 15
SPECIFICATIONS 150 240 280 212 22 8 19

Pump
Liquid Type of liquid Sewage, Wastewater Output CL Weight
Size Model A B C D E F H J L1
Handled Temperature 0°C~40°C kW (m) kg
SECTIONAL VIEW
Min solids size 76mm 80 DML 52.2 2.2 534 320 378 157 285 298 668 210 278 10 80
Maximum Submergence 8m 80 DML 53.7 3.7 534 320 378 157 285 298 727 210 279 10 87
Minimum Submergence Refer to water level (L.W.L.) in dimensions Item Quantity 80 DML 55.5 5.5 640 381 453 188 360 334 824 255 310 10 118
It is possible to operate at low water level Number Description Material per unit
80 80 DML 57.5 7.5 640 381 453 188 360 334 824 255 310 10 123
for 30min 001 Pump Casing FC2001 Cast iron 1
016
Mechanical
FC200 Cast iron 1
80 DML 511 11 734 455 513 221 420 350 938 315 329 10 157
Synchronous Speed 1500min-1 Seal Cover
80 DML 515 15 734 455 513 221 420 350 938 315 329 10 163
Mechanical seal Double mechanical seal 021 Impeller FC200 Cast Iron 1
Construction Impeller Single channel, non-clog 080 Bushing SS Steel 1 80 DML 522 22 777 497 533 245 440 353 1021 335 332 10 223

Bearing Prelubricated bearing 107 Wearing Ring BC Bronze 1 100 DML 51.5 1.5 577 320 420 157 315 313 668 210 279 10 81
Mechanical
Casing Cast iron 111
Seal
1 100 DML 52.2 2.2 577 320 420 157 315 313 668 210 279 10 81
Impeller Cast iron 174 Discharge Pipe FC200 Cast iron 1 100 DML 53.7 3.7 577 320 420 157 315 313 727 210 279 10 89
Material Shaft 403 Stainless steel 193 Oil Plug NBR/Stainless Steel 1 set 100 DML 55.5 5.5 653 381 465 188 360 334 824 255 310 10 121
211 Airvent Valve C3604 Brass 1
Mechanical Impeller side Silicon carbide 100 100 DML 57.5 7.5 653 381 465 188 360 334 824 255 310 10 125
275 Impeller Bolt SUS304 Stainless Steel 1
Seal Motor side Ceramic / Carbon 100 DML 511 11 746 455 525 221 420 350 938 315 329 10 160
801 Rotor 1
O-ring NBR 802 Stator 1 100 DML 515 15 746 455 525 221 420 350 938 315 329 10 166
Motor Submersible
811-1 2 100 DML 522 22 790 497 545 245 440 353 1021 335 332 10 226
Cable (Power)
Type 4 pole, air-filled watertight Submersible 150 DML 55.5 5.5 713 381 525 188 385 369 824 255 310 10 127
811-2 1
Insulation Class F Cable (signal)
150 DML 57.5 7.5 713 381 525 188 385 369 824 255 310 10 132
814 Motor Frame FC200 Cast Iron 1
Protection Built-in overload protector (1.5, 2.2kW) ; Built-in temperature detector protection (3.7 - 22kW)
Power Side 150 150 DML 511 11 806 455 585 221 445 385 938 315 329 10 166
Accessories 816 FC200 Cast Iron 1
Bracket 150 DML 515 15 806 455 585 221 445 385 938 315 329 10 172
Standard Submersible cable: 10m 817
Opposite Side
FC200 Cast Iron 1
Bracket 150 DML 522 22 850 497 605 245 465 388 1021 335 332 10 232
Optional Quick discharge connector, Leakage detector (Electrode type)
830 Shaft SUS403 Stainless Steel 1 Units: mm unless otherwise specified
Dry pit type (DML-D)
849-1 Ball Bearing 1
849-2 Ball Bearing 1
856 Thermal Protector 3
904 Lifting Hanger SS Steel 1
* This sectional view shows typical construction. 907 Bearing Cover SPCC Steel 1
 Non-Clog Submersible Pump DML Non-Clog Submersible Pump DML

DIMENSION WITH QDC DIMENSION WITH QDC

PUMP
Applicable Models - 80 52.2, 53.7 Applicable Models - 80(100)(150) DML Note:
1. For detailed dimensions of the
pumps, refer to separate dimension
data sheets.
Note: 2. The discharge bend and
companion flange supplied with the
1. For detailed dimensions of the pump are used with the QDC.
pumps, refer to separate dimension
data sheets. 3. The weight in dimension tables
refers only to the weight of the QDC.
Non-Clog Submersible Pump
2. The discharge bend and
companion flange supplied with the
4. Standard accessories supplied Type DML
with QDC include:-
pump are used with the QDC.
- Connector body with
foundation bolts
3. The weight in dimension tables - Guide pipe support
refers only to the weight of the QDC. - Sliding glide
- Adaptor flange
APPLICATIONS Single Channel Impeller (Type M)
Guide rail is not supplied. Permit 76mm Solid Passage
4. Standard accessories supplied
with QDC include:-
• Sewage • Effluent
- Connector body with • Waste Water • Dewatering Robust EBARA Design
foundation bolts
- Guide pipe support
- Sliding glide FEATURES
- Adaptor flange
Guide rail is not supplied.
• Non-clog, single channel impeller has 76mm (3'') spherical passage;
prevents clogging; high efficiency and saves energy.
DA DE DF DG DT DN DD • Robust construction - large diameter, short overhang shaft with
80 150 185 126 18 8 15 stainless steel fasteners.
100 175 210 151 20 8 15 • Double mechanical seals - hard faced upper and lower seals operate
150 240 280 212 22 8 19 in an oil bath; providing longer service life and lower maintenance costs.
Dish. QDC QDC • Air-filled, Class F insulated, heavy duty motor, operates cooler with
Pump bore A P1 P2 G1 G2 F H1 H2 H3 L1 L6 BN1 BN2 BM BY1 BW DM I D1 E1 Model
Weight
kg higher efficiencies.
80 DML 55.5 80 628 105 105 185 210 365 240 265 335 310 31 100 40 220 180 230 800 700 19 175 LL100 46 • High quality stainless steel shaft; provides high tensile strength,
80 DML 57.5 80 628 105 105 185 210 365 240 265 335 310 31 100 40 220 180 230 800 700 19 175 LL100 46 corrosion resistance.
80 DML 511 80 721 105 105 185 210 365 240 265 335 329 15 100 40 220 180 230 1000 700 19 175 LL100 46 • Dry-pit is available as optional.
80 DML 515 80 721 105 105 185 210 365 240 265 355 329 15 100 40 220 180 230 1000 700 19 175 LL100 46
80 DML 522 80 765 105 105 185 210 365 240 265 335 332 12 100 40 220 180 230 1000 700 19 175 LL100 46
DA DE DF DG DT DN DD 100 DML 51.5 100 552 105 105 185 210 365 240 255 325 279 52 100 40 220 180 230 800 700 19 155 LL100 46
80 150 185 126 18 8 15 100 DML 52.2 100 552 105 105 185 210 365 240 255 325 279 52 100 40 220 180 230 800 700 19 155 LL100 46
100 DML 53.7 100 552 105 105 185 210 365 240 255 325 279 52 100 40 220 180 230 800 700 19 155 LL100 46
100 DML 55.5 100 628 105 105 185 210 365 240 265 335 310 31 100 40 220 180 230 800 700 19 175 LL100 46
100 DML 57.5 100 628 105 105 185 210 365 240 265 335 310 31 100 40 220 180 230 800 700 19 175 LL100 46
100 DML 511 100 721 105 105 185 210 365 240 265 335 329 15 100 40 220 180 230 1000 700 19 175 LL100 46
100 DML 515 100 721 105 105 185 210 365 240 265 335 329 15 100 40 220 180 230 1000 700 19 175 LL100 46
QDC 100 DML 522 100 765 105 105 185 210 365 240 265 335 332 12 100 40 220 180 230 1000 700 19 175 LL100 46
Disch. QDC
Pump Model A P1 P2 G1 G2 F H1 H2 H3 L1 L6 BN1 BN2 D1 E1 Weight 150 DML 55.5 150 628 105 105 185 235 400 240 265 335 210 21 100 40 220 180 230 800 700 19 175 LL100 46
bore Model kg
80 DML 52.2 80 492 75 90 125 165 285 175 230 280 279 7 75 90 15 155 LM80 17 150 DML 57.5 150 628 105 105 185 235 400 240 265 335 310 31 100 40 220 180 230 800 700 19 175 LL100 46

80 DML 53.7 80 492 75 90 125 165 285 175 230 280 279 7 75 90 15 155 LM80 17 150 DML 511 150 721 105 105 185 235 400 240 265 335 329 15 100 40 220 180 230 1000 700 19 175 LL100 46
150 DML 515 150 721 105 105 185 235 400 240 265 335 329 15 100 40 220 180 230 1000 700 19 175 LL100 46
150 DML 522 150 765 105 105 185 235 400 240 265 335 332 12 100 40 220 180 230 1000 700 19 175 LL100 46
Units: mm unless otherwise specified
* Dimensional details are provided for reference only.
* All specifications are subject to change without prior notice.

Authorised dealer:
EBARA Pumps Malaysia Sdn Bhd
6, Jalan TP3, UEP Subang Jaya Industrial Park,
47620 Subang Jaya, Selangor, Malaysia.
Tel : 03-8023 6622 Fax : 03-8023 9355
Email : sales@ebara.com.my
Website : www.ebara.com.my
EPM DML 0313
 Non-Clog Submersible Pump DML Non-Clog Submersible Pump DML

DIMENSION WITH QDC DIMENSION WITH QDC

PUMP
Applicable Models - 80 52.2, 53.7 Applicable Models - 80(100)(150) DML Note:
1. For detailed dimensions of the
pumps, refer to separate dimension
data sheets.
Note: 2. The discharge bend and
companion flange supplied with the
1. For detailed dimensions of the pump are used with the QDC.

Non-Clog Submersible Pump

pumps, refer to separate dimension
data sheets. 3. The weight in dimension tables
refers only to the weight of the QDC.
2. The discharge bend and
companion flange supplied with the
4. Standard accessories supplied Type DML
with QDC include:-
pump are used with the QDC.
- Connector body with
foundation bolts
3. The weight in dimension tables - Guide pipe support
refers only to the weight of the QDC. - Sliding glide
- Adaptor flange
APPLICATIONS Single Channel Impeller (Type M)
Guide rail is not supplied. Permit 76mm Solid Passage
4. Standard accessories supplied
with QDC include:-
• Sewage • Effluent
- Connector body with • Waste Water • Dewatering Robust EBARA Design
foundation bolts
- Guide pipe support
- Sliding glide FEATURES
- Adaptor flange
Guide rail is not supplied.
• Non-clog, single channel impeller has 76mm (3'') spherical passage;
prevents clogging; high efficiency and saves energy.
DA DE DF DG DT DN DD • Robust construction - large diameter, short overhang shaft with
80 150 185 126 18 8 15 stainless steel fasteners.
100 175 210 151 20 8 15 • Double mechanical seals - hard faced upper and lower seals operate
150 240 280 212 22 8 19 in an oil bath; providing longer service life and lower maintenance costs.
Dish. QDC QDC • Air-filled, Class F insulated, heavy duty motor, operates cooler with
Pump bore A P1 P2 G1 G2 F H1 H2 H3 L1 L6 BN1 BN2 BM BY1 BW DM I D1 E1 Model
Weight
kg higher efficiencies.
80 DML 55.5 80 628 105 105 185 210 365 240 265 335 310 31 100 40 220 180 230 800 700 19 175 LL100 46 • High quality stainless steel shaft; provides high tensile strength,
80 DML 57.5 80 628 105 105 185 210 365 240 265 335 310 31 100 40 220 180 230 800 700 19 175 LL100 46 corrosion resistance.
80 DML 511 80 721 105 105 185 210 365 240 265 335 329 15 100 40 220 180 230 1000 700 19 175 LL100 46 • Dry-pit is available as optional.
80 DML 515 80 721 105 105 185 210 365 240 265 355 329 15 100 40 220 180 230 1000 700 19 175 LL100 46
80 DML 522 80 765 105 105 185 210 365 240 265 335 332 12 100 40 220 180 230 1000 700 19 175 LL100 46
DA DE DF DG DT DN DD 100 DML 51.5 100 552 105 105 185 210 365 240 255 325 279 52 100 40 220 180 230 800 700 19 155 LL100 46
80 150 185 126 18 8 15 100 DML 52.2 100 552 105 105 185 210 365 240 255 325 279 52 100 40 220 180 230 800 700 19 155 LL100 46
100 DML 53.7 100 552 105 105 185 210 365 240 255 325 279 52 100 40 220 180 230 800 700 19 155 LL100 46
100 DML 55.5 100 628 105 105 185 210 365 240 265 335 310 31 100 40 220 180 230 800 700 19 175 LL100 46
100 DML 57.5 100 628 105 105 185 210 365 240 265 335 310 31 100 40 220 180 230 800 700 19 175 LL100 46
100 DML 511 100 721 105 105 185 210 365 240 265 335 329 15 100 40 220 180 230 1000 700 19 175 LL100 46
100 DML 515 100 721 105 105 185 210 365 240 265 335 329 15 100 40 220 180 230 1000 700 19 175 LL100 46
QDC 100 DML 522 100 765 105 105 185 210 365 240 265 335 332 12 100 40 220 180 230 1000 700 19 175 LL100 46
Disch. QDC
Pump Model A P1 P2 G1 G2 F H1 H2 H3 L1 L6 BN1 BN2 D1 E1 Weight 150 DML 55.5 150 628 105 105 185 235 400 240 265 335 210 21 100 40 220 180 230 800 700 19 175 LL100 46
bore Model kg
80 DML 52.2 80 492 75 90 125 165 285 175 230 280 279 7 75 90 15 155 LM80 17 150 DML 57.5 150 628 105 105 185 235 400 240 265 335 310 31 100 40 220 180 230 800 700 19 175 LL100 46

80 DML 53.7 80 492 75 90 125 165 285 175 230 280 279 7 75 90 15 155 LM80 17 150 DML 511 150 721 105 105 185 235 400 240 265 335 329 15 100 40 220 180 230 1000 700 19 175 LL100 46
150 DML 515 150 721 105 105 185 235 400 240 265 335 329 15 100 40 220 180 230 1000 700 19 175 LL100 46
150 DML 522 150 765 105 105 185 235 400 240 265 335 332 12 100 40 220 180 230 1000 700 19 175 LL100 46
Units: mm unless otherwise specified
* Dimensional details are provided for reference only.
* All specifications are subject to change without prior notice.

Authorised dealer:
EBARA Pumps Malaysia Sdn Bhd
6, Jalan TP3, UEP Subang Jaya Industrial Park,
47620 Subang Jaya, Selangor, Malaysia.
Tel : 03-8023 6622 Fax : 03-8023 9355
Email : sales@ebara.com.my
Website : www.ebara.com.my
EPM DML 0313