Model CMAS-203 Snap Action Float Operated Pneumatic Liquid Level Control

SPECIFICATIONS / PARTS LIST
Model CMAS-203
Snap Action Float Operated
Pneumatic Liquid Level Control
Bulletin SSIN009 Issue/Rev. 0.1 (8/17)
The INVALCO Model CMAS-203 utilizes a stainless steel

float and a pneumatic output for control of liquid level. An
override feature permits adjustment of set points without
disturbing process level.
Features and Benefits

• Adjustable span to desired level detection point.
• Proven Micro Valve® unit provides long life and ease
of maintenance.
• Operation override allows for the adjustment of set
points without disturbing process level.
• Steel Body provides long life, reducing cost of
ownership.
Options
• NACE adaptable for use in harsh, corrosive service.
• Dual seal available.
Specifications Micro Valve® Specifications

Float Size Model
2” diameter x 10” long 316F1, three-way
Float Material Ports

304 Stainless Steel 1/4” FNPT
Float Rod Body Material

303 Stainless Steel Anodized Aluminum
Vessel Connection Orifice

2” MNPT –– Standard 1/16” (90 psi working pressure).
Working Pressure –– 1/32" (250 psi working pressure).

300 psig. Working pressure of controller is limited by –– Consult factory for other working pressures.
collapse of float ball.
Temperature Limits
-20°F to 250°F
Dimensions
13.6" 6.2"
(344) (173)
1.5" (100) MIN. 1.5" (38) MIN. 2.5"

OR
3.6" (240) MAX. 3.6" (91) MAX. (63)
2.0" DIA
(51) 3 2
10.0" 2" NPT
(253)
Dimensions – Inches to the nearest tenth (millimeters to the nearest whole mm), each independently dimensioned from engineering drawings.
Three-way Micro Valve Operation Model CMAS-203 Typical Installation
With Float Level With Float Level

at Low Level at High Level Vent
Port 1 Closed to 2 Port 1 Open to 2 A
Port 2 Common Port 2 Common
B
Port 3 Open to 2 Port 3 Closed to 2
Diaphragm
Valve C
Air
Supply
Fluid
A
B
C
Vent
Diaphragm
Valve
2 Bulletin SSIN009 Issue/Rev. 0.1 (8/17)

24 20 5 4
1 2 6 23
7
21 19 18
8 22
11
17
10
Parts
Parts Key: ** Recommended spare parts. 15
Item Notes Description Qty. Part No.
1 * Float 2" x 10" 304 S.S. 1 45011711
2 Washer 1/4 Tooth Lock 1 65004363
16 12 14 13 Arrow points to float
(on same centerline)
3 Screw 6-32 x 1/4 SHCS 1 65011385
4 * Micro Valve 316F1-B 1 87000214
5 Arm Assembly 2 79107142
6 Nut 1/4-20 Hex 1 65002175
7 Cover 1 45013435
8 Screw 10-32 x 1/4 SHCS 2 65005945
9 * O-Ring BUN-110-90 2 67101532
10 * O-Ring BUN-010-90 2 67101327
11 Body, 2" NPT (CMAS-203) 1 45013463
12 Stuffing Box 2 45013459
13 Position Indicator 1 45013437
14 Operation Check Knob 1 45013460
15 Roll Pin 1 79006139
16 Float Rod 1 45231080
17 Shaft 1 45013458
18 Housing 1 45013461
19 Screw 10-32 x 1/4 BHMS 1 65007905
20 Screw 8-32 x 1/4 BHMS 2 65007856
21 Hole Plug 2 46015996
22 Washer #10 Lock 2 65006945
23 Spacer 2 46002529
24 Screw 8-32 x 5/16 BHMS 2 65007858
Bulletin SSIN009 Issue/Rev. 0.1 (8/17) 3

Ordering information
To Order: Specify part number and catalog model number.
®
Micro Valve is a registered trademark of Barworth Corporation
Nominal Materials Part

Catalog Model Number
Connection Size & Type Body Float Number
CMAS-203 2" NPT Steel 304 S.S. 80003006
The specifications contained herein are subject to change without notice and any user of said specifications should verify from the manufacturer that the specifications are currently in
effect. O
therwise, the manufacturer assumes no responsibility for the use of specifications which may have been changed and are no longer in effect.
Contact information is subject to change. For the most current contact information, visit our website at www.fmctechnologies.com/measurementsolutions and click on the “Contact Us”
link in the left-hand column.
USA Operation
1602 Wagner Avenue
Erie, Pennsylvania 16510 USA
TechnipFMC P:+1 814.898.5000
FMC Technologies
TechnipFMC.com Measurement Solutions, Inc. Germany Operation
500 North Sam Houston Parkway West, Smith Meter GmbH
FMCTechnologies.com/MeasurementSolutions Suite 100 Regentstrasse 1
Houston, Texas 77067 USA 25474 Ellerbek, Germany
© TechnipFMC 2017 SSIN009 Issue/Rev. 0.1 (8/17) P:+1 281.260.2190 P:+49 4101.304.0

Model CMAS-203 Snap Action Float Operated Pneumatic Liquid Level Control

Uploaded by

Copyright:

Available Formats

Model CMAS-203 Snap Action Float Operated Pneumatic Liquid Level Control

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Model CMAS-203 Snap Action Float Operated Pneumatic Liquid Level Control

Uploaded by

Copyright:

Available Formats

SPECIFICATIONS / PARTS LIST

The INVALCO Model CMAS-203 utilizes a stainless steel

Features and Benefits

Specifications Micro Valve® Specifications

Float Material Ports

Float Rod Body Material

Vessel Connection Orifice

Working Pressure –– 1/32" (250 psi working pressure).

1.5" (100) MIN. 1.5" (38) MIN. 2.5"

Three-way Micro Valve Operation Model CMAS-203 Typical Installation

With Float Level With Float Level

2 Bulletin SSIN009 Issue/Rev. 0.1 (8/17)

Bulletin SSIN009 Issue/Rev. 0.1 (8/17) 3

Nominal Materials Part

You might also like